Tivoli Header
Resource Model Reference
This indication is sent when current commands are too high on the
redirector. Because the percentage utilization of bytes per second is
normal, this is most likely due to a problem with the workstation service or a
software component tied into the service.
The indication has the following attributes:
- CurrentCommands
- The current commands that are queued for service on the redirector
- RedirectorBPS
- The bytes per second being transferred through the redirector
- CurrentBandWidth
- The bandwidth of the network interface card
The indication is generated when the following thresholds are
exceeded:
| Threshold
| Description
| Default
|
| High Current Commands Modifier (HighCurrCmdsMod)
|
This threshold counts the requests to the redirector that are currently queued
for service. If this number is much larger than the number of network
adapter cards installed in the computer, the networks, servers, or both being
accessed have serious bottlenecks. This value is used in conjunction
with the number of network cards installed on the system. The final
threshold value is calculated by multiplying the number of network cards in
the system by this threshold. If the current commands rise above this
level, there is a bottleneck occurring. When the value of current
commands is greater than the product of this threshold times the total number
of installed network cards, this indication is generated.
| 10
|
| High Percent Bytes Per Second (HighPercentBytesSec)
|
This threshold must not be exceeded.
| 9
|
| High Percent Utilization (HighPercentUtilization)
|
This threshold determines at what point the network utilization of the
internal segment is too high.
| 40
|
The following table shows the default settings for this indication:
| Setting
| Default
|
| Send indications to Tivoli Enterprise Console
| Yes
|
| Send indications to Tivoli Business Systems Manager
| No
|
| Occurrences
| 6
|
| Holes
| 1
|
[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]
