MSM (Storage Management) Application for Windows Supported controllers: - Onboard LSI 1064 SAS controller - Onboard LSI 1064e SAS controller - Onboard LSI 1068e SAS controller - Onboard LSI 1078 SAS controller - IBM SAS HBA (25R8060) - IBM 3Gb SAS HBA v2 (44E8700) - IBM SAS Expansion Card (CFFv) for IBM BladeCenter (39Y9190) - IBM SAS Connectivity Card (CFFv) for IBM BladeCenter (43W3974) - IBM SAS/SATA RAID Kit (42C1312, 42C1313) - IBM ServeRAID BR10i SAS controller (44E8688) - IBM ServeRAID BR10il SAS controller (44X0411) - IBM ServeRAID BR10il v2 SAS controller (49Y4731) - MegaRAID 8480 SAS controller (39R8850) - IBM ServeRAID MR10i SAS controller (43W4296) - IBM ServeRAID MR10k SAS controller (43W4280) - IBM ServeRAID MR10M SAS controller (43W4339) - IBM ServeRAID MR10il SAS controller (44E8767) - IBM ServeRAID MR10is SAS controller (44E8695) - IBM ServeRAID MR10ie (CIOv) SAS controller (46C7167) - ServeRAID M5014 SAS/SATA controller (46M0916) - ServeRAID M5015 SAS/SATA controller (46M0829) - ServeRAID M1015 SAS/SATA controller (46M0831) (C) Copyright International Business Machines Corporation 1999, 2009. All rights reserved. US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. Note: Before using this information and the product it supports, read the general information in "Notices and trademarks" in this document. CONTENTS ________ 1.0 Overview 2.0 Installation and setup instructions 3.0 Usage information 4.0 Unattended mode 5.0 Web site and support phone number 6.0 Notices and trademarks 7.0 Disclaimer 1.0 Overview _____________ 1.1 This document describes how to install the MSM storage management application. MSM is a GUI application that runs in the Windows environment. 1.2 Limitations - None 1.3 Problems fixed: - See change history 1.4 Level of Recommendations and Prerequisites for the update: - If using any of the following, the LSI Logic MPT Windows device driver (Miniport or Storport) must be installed and loaded before MSM will function correctly. Additionally, in the absence of the LSI Pseudo Device Driver, the controller must have at least one drive attached for the utility to be able to recognize the controller. This is due to a restriction of the Windows driver. - Onboard LSI 1064/1064e/1068/1078 - IBM SAS HBA/3Gb SAS HBA v2 - IBM SAS Expansion Card (CFFv)/SAS Connectivity Card (CFFv) - IBM SAS/SATA RAID Kits - IBM ServeRAID BR10 Series Controllers - If using any of the following, the LSI MegaRAID driver must be installed and loaded before MSM will function correctly: - IBM ServeRAID MR10 Series Controllers - IBM ServeRAID M1000 or M5000 Series Controllers 1.5 Dependencies: - None 1.6 Update Contents o ibm_sw_msm_5.01-01_windows_32-64.zip - Zipped installation package o ibm_sw_msm_5.01-01_windows_32-64.chg - Change history 2.0 Installation and setup instructions ________________________________________ Installation ------------ The installer provides the user with four setup options: - Complete: This option will install all program features. - Client: This option will only install components required to remotely view and configure servers. - Server: This option will only install components required for remote server management. - Stand Alone: This option will only install components required for local server management. This installation kit can be used in either interactive or non-interactive mode. To install the application in interactive mode, execute the command: msiexec /i <.msi file> To install the product in non-interactive, scripted mode, execute the command: msiexec /i <.msi file> -qn [REMOVEUTIL=[,]] where "util1" and "util2" are utilities that you do not want to install. The SNMP Trap can be disabled either by using custom setup or by using TRAPIND="N" as an msiexec parameter. Uninstallation -------------- MSM can be uninstalled using "MegaRAID Storage Manager/Uninstall" from the Start Menu. MSM can also be removed using the native Add/Remove Programs utility. SNMP Agent Configuration ------------------------ NOTE : Before you install the agent, make sure that SNMP Service is already installed on the system. To install SNMP Service: 1. Select Add/Remove Programs from Control Panel. 2. Select "Add/Remove Windows components" in the left side of the "Add/Remove Programs" window. 3. Select "Management and Monitoring Tools" and click Next. 4. Insert the Windows installation CD when prompted. To Configure the SNMP Service on the server side: 1. Select "Administrative Tools" from the Control Panel. 2. Select "Services" in the "Administrative Tools" window. 3. Select "SNMP Services" in the "Services" window. 4. Open SNMP Services. 5. Go to the "Security" tab and make sure that "Accept SNMP Packets from any host" is selected. 6. Go to the "Traps" tab and verify the list of host IPs to which you want the traps to be sent. To use the SNMP Agent: 1. Use the SNMP Manager to retrieve the data. NOTE: It is assumed that you have already compiled mib files. The mib files are available at the same location as setup.exe. 2. Use the Trap utility to get the traps. 3.0 Usage information ______________________ Detailed usage information can be found in the ServeRAID M Series or MR Series Software User's Guide. 4.0 Unattended Mode ____________________ This is a user interface application, and therefore cannot be used in unattended mode. For information on unattended installation or uninstallation, see section 2.0 above. 5.0 Web Sites and Support Phone Number ______________________________________ o You can find support and downloads for IBM products from the IBM Support Web site: http://www.ibm.com/support/ You can find support and downloads specific to disk controllers by searching for the "Disk Controller and RAID Software Matrix" from the main support page. o For the latest compatibility information, see the IBM ServerProven Web site: http://www-03.ibm.com/servers/eserver/serverproven/compat/us/ o With the original purchase of an IBM hardware product, you have access to extensive support coverage. During the IBM hardware product warranty period, you may call the IBM HelpCenter (1-800-IBM-SERV in the U.S.) for hardware product assistance covered under the terms of the IBM hardware warranty. 6.0 Trademarks and Notices __________________________ This product may contain program code or packages ("code") licensed by third parties, as well as code licensed by IBM. For non-IBM Code, the third parties, not IBM, are the licensors. Your use of the non-IBM code is governed by the terms of the license accompanying that code, as identified in the attached files. You acknowledge that you have read and agree to the license agreements contained in these files. If you do not agree to the terms of these third party license agreements, you may not use the accompanying code. IBM and ServeRAID are trademarks or registered trademarks of International Business Machines Corporation in the United States and other countries. LSI and MegaRAID are trademarks or registered trademarks of LSI Logic, Corp in the United States and other countries. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others. 7.0 Disclaimer ______________ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.