=============================================================================਀        䘀椀爀洀眀愀爀攀 愀渀搀 唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 唀瀀搀愀琀攀 昀漀爀 䔀洀甀氀攀砀 㐀䜀戀 䘀䌀 䠀䈀䄀猀 - BladeCenter - ਀                              ⴀ 圀椀渀搀漀眀猀 ⴀ =============================================================================਀䘀椀爀洀眀愀爀攀 瘀攀爀猀椀漀渀 ㈀⸀㠀　愀㐀 Universal Boot version 6.02a7਀ This update supports BladeCenter Open Fabric Manager (BOFM)਀ NOTE: A vendor-supplied readme file from Emulex is attached to the ਀攀渀搀 漀昀 琀栀椀猀 昀椀氀攀⸀  䤀琀 椀猀 愀 最攀渀攀爀愀氀 爀攀氀攀愀猀攀 搀漀挀甀洀攀渀琀 椀渀挀氀甀搀攀搀 昀漀爀 椀渀昀漀爀洀愀琀椀漀渀愀氀  purposes only and may contain references to update procedures not directly ਀猀甀瀀瀀漀爀琀攀搀 戀礀 琀栀椀猀 瀀愀挀欀愀最攀⸀ ਀䤀䴀倀伀刀吀䄀一吀 一伀吀䔀㨀 䔀洀甀氀攀砀✀猀 唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 甀瀀搀愀琀攀 瀀爀漀挀攀猀猀 爀攀焀甀椀爀攀猀 琀栀攀 椀渀猀琀愀氀氀愀琀椀漀渀  of an Emulex "Applications Kit" as a prerequisite. The correct Apps-Kit is ਀椀渀挀氀甀搀攀搀 椀渀 琀栀椀猀 䘀圀 甀瀀搀愀琀攀 瀀愀挀欀愀最攀Ⰰ 愀渀搀 眀椀氀氀 椀渀猀琀愀氀氀 愀甀琀漀洀愀琀椀挀愀氀氀礀Ⰰ 愀昀琀攀爀  uninstalling any previously installed copy of HBAnyware (prevents problems ਀眀椀琀栀 椀渀挀漀洀瀀愀琀椀戀氀攀 瘀攀爀猀椀漀渀 挀漀渀昀氀椀挀琀猀⤀⸀  吀栀攀 䄀瀀瀀猀ⴀ䬀椀琀 椀猀 愀 昀甀氀氀礀ⴀ昀甀渀挀琀椀漀渀愀氀  command-line-only version of HBAnyware. Following a successful FW update, ਀琀栀攀 甀猀攀爀 挀愀渀 洀愀渀甀愀氀氀礀 甀渀椀渀猀琀愀氀氀 琀栀攀 愀瀀瀀猀 欀椀琀 ⠀愀搀搀ⴀ爀攀洀漀瘀攀 瀀爀漀最爀愀洀猀⤀ 愀渀搀 椀渀猀琀愀氀氀  the full GUI-based HBAnyware if desired. The apps-kit is only required during ਀琀栀攀 䘀圀 甀瀀搀愀琀攀⸀ ਀䤀䴀倀伀刀吀䄀一吀 一伀吀䔀㨀  圀椀渀搀漀眀猀 ㈀　　㠀 椀渀挀氀甀搀攀猀 愀渀 椀渀ⴀ戀漀砀 搀爀椀瘀攀爀 昀漀爀 䔀洀甀氀攀砀 䘀椀戀爀攀挀栀愀渀渀攀氀⸀ The in-box driver does not support firmware flashing. An UpdateXpress Emulex਀搀攀瘀椀挀攀 搀爀椀瘀攀爀 瀀愀挀欀愀最攀 椀猀 愀瘀愀椀氀愀戀氀攀⸀  倀氀攀愀猀攀 攀渀猀甀爀攀 琀栀愀琀 琀栀攀 氀愀琀攀猀琀 瘀攀爀猀椀漀渀 漀昀 the device driver is installed before attempting this FW update. ਀ (C) Copyright International Business Machines Corporation 1999, 2008. All ਀爀椀最栀琀猀 爀攀猀攀爀瘀攀搀⸀  唀匀 䜀漀瘀攀爀渀洀攀渀琀 唀猀攀爀猀 刀攀猀琀爀椀挀琀攀搀 刀椀最栀琀猀 ⴀ 唀猀攀Ⰰ 搀甀瀀氀椀挀愀琀椀漀渀Ⰰ or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.਀ Before using this information and the product it supports, please read the ਀最攀渀攀爀愀氀 椀渀昀漀爀洀愀琀椀漀渀 椀渀 ∀一漀琀椀挀攀猀 愀渀搀 吀爀愀搀攀洀愀爀欀猀∀ 椀渀 琀栀椀猀 搀漀挀甀洀攀渀琀⸀ ਀ CONTENTS਀开开开开开开开开 ਀㄀⸀　  伀瘀攀爀瘀椀攀眀 2.0 Installation and setup instructions਀㌀⸀　  䌀漀渀昀椀最甀爀愀琀椀漀渀 椀渀昀漀爀洀愀琀椀漀渀  4.0 Unattended mode਀㔀⸀　  圀攀戀 椀渀昀漀爀洀愀琀椀漀渀 愀渀搀 猀甀瀀瀀漀爀琀 瀀栀漀渀攀 一甀洀戀攀爀 6.0 Notices and Trademarks਀㜀⸀　  䐀椀猀挀氀愀椀洀攀爀 ਀ 1.0 Overview਀开开开开开开开开开开开开开 ਀  ㄀⸀㄀    吀栀椀猀 甀瀀搀愀琀攀 椀渀挀氀甀搀攀猀 琀栀攀 氀愀琀攀猀琀 甀渀椀瘀攀爀猀愀氀 戀漀漀琀 椀洀愀最攀 昀漀爀 䈀氀愀搀攀䌀攀渀琀攀爀  Emulex FibreChannel HBAs. It fully supports BladeCenter Open Fabric ਀         䴀愀渀愀最攀爀 ⠀䈀伀䘀䴀⤀⸀ ਀  ㄀⸀㈀    䰀椀洀椀琀愀琀椀漀渀猀 - This update is intended only for Emulex 4gb FC HBAs for BladeCenter.਀ 1.3 Problems fixed:਀         ⴀ 匀攀攀 挀栀愀渀最攀 栀椀猀琀漀爀礀 昀漀爀 洀漀爀攀 搀攀琀愀椀氀猀⸀ ਀  ㄀⸀㐀    䰀攀瘀攀氀 漀昀 刀攀挀漀洀洀攀渀搀愀琀椀漀渀猀 愀渀搀 倀爀攀爀攀焀甀椀猀椀琀攀猀 昀漀爀 琀栀攀 甀瀀搀愀琀攀㨀 - Emulex device driver਀ 1.5 Dependencies਀          ⴀ 䔀洀甀氀攀砀 搀攀瘀椀挀攀 搀爀椀瘀攀爀 - Emulex Applications Kit (included in this FW update)਀ 1.6 Update Contents਀          漀  攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀攀砀攀 - Universal boot update਀          漀  攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀挀栀最 - Change history਀          漀  攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀琀砀琀 - Readme਀ ਀㈀⸀　  䤀渀猀琀愀氀氀愀琀椀漀渀 愀渀搀 猀攀琀甀瀀 椀渀猀琀爀甀挀琀椀漀渀猀 ________________________________________਀      This package can be used with several of IBM's update management tools, ਀  椀渀挀氀甀搀椀渀最 䤀䈀䴀 唀瀀搀愀琀攀堀瀀爀攀猀猀 䴀愀渀愀最攀爀Ⰰ 䤀䈀䴀 唀瀀搀愀琀攀堀瀀爀攀猀猀 匀礀猀琀攀洀 倀愀挀欀猀Ⰰ 愀渀搀  IBM Director.਀ It can also be used as a standalone executable package. ਀ To use the package with one of IBM's update management tools, following the ਀  椀渀猀琀爀甀挀琀椀漀渀猀 琀栀愀琀 挀愀洀攀 眀椀琀栀 礀漀甀爀 猀瀀攀挀椀昀椀挀 洀愀渀愀最攀洀攀渀琀 琀漀漀氀⸀ ਀  ㈀⸀㄀ 匀琀愀渀搀愀氀漀渀攀 甀猀愀最攀 椀渀猀琀爀甀挀琀椀漀渀猀 ---------------------------------਀ As a standalone package, this executable can be used in the following ways:਀    ⴀ 琀漀 甀瀀搀愀琀攀 琀栀攀 䔀洀甀氀攀砀 䘀圀 漀渀 琀栀攀 氀漀挀愀氀 猀礀猀琀攀洀⸀ - to copy all files necessary for the update to the local hard drive or ਀      漀琀栀攀爀 洀攀搀椀愀⸀ ਀  唀瀀搀愀琀椀渀最 琀栀攀 氀漀挀愀氀 猀礀猀琀攀洀㨀 1) Run the executable by double clicking on the file icon, or by typing ਀       ∀攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀攀砀攀∀ 愀琀 愀 挀漀洀洀愀渀搀 瀀爀漀洀瀀琀⸀ 2) Select "Perform Update" and then click "Next".਀    ㌀⤀ 䌀氀椀挀欀 ∀唀瀀搀愀琀攀∀⸀ 3) To perform another function, click "Back", otherwise click "Exit" to ਀       攀砀椀琀 琀栀攀 甀琀椀氀椀琀礀⸀ ਀  䔀砀琀爀愀挀琀椀渀最 昀椀氀攀猀 1) Run the executable by double clicking on the file icon, or by typing ਀       ∀攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀攀砀攀∀ 愀琀 愀 挀漀洀洀愀渀搀 瀀爀漀洀瀀琀⸀ 2) Select "Extract to Hard Drive" and then click "Next".਀    ㌀⤀ 匀攀氀攀挀琀 琀栀攀 搀攀猀椀爀攀搀 搀攀猀琀椀渀愀琀椀漀渀 搀椀爀攀挀琀漀爀礀 漀爀 洀攀搀椀愀 愀渀搀 琀栀攀渀 挀氀椀挀欀 ∀伀䬀∀⸀ 4) To perform another function, click "Back", otherwise click "Exit" to ਀       攀砀椀琀 琀栀攀 甀琀椀氀椀琀礀⸀ ਀  ㈀⸀㈀ 吀爀漀甀戀氀攀猀栀漀漀琀椀渀最 琀椀瀀猀 ------------------------਀    一漀琀攀㨀  刀攀琀甀爀渀 挀漀搀攀 椀渀昀漀爀洀愀琀椀漀渀 椀猀 猀甀瀀瀀爀攀猀猀攀搀 戀礀 琀栀攀 愀甀琀漀洀愀琀攀搀 椀渀猀琀愀氀氀愀琀椀漀渀 process. If you experience an unsuccessful installation, try extracting the਀    瀀愀挀欀愀最攀 挀漀渀琀攀渀琀猀 琀漀 琀栀攀 栀愀爀搀 搀爀椀瘀攀爀 愀渀搀 洀愀渀甀愀氀氀礀 爀甀渀渀椀渀最 琀栀攀 椀渀猀琀愀氀氀 猀挀爀椀瀀琀⸀ The following return code listing will help you determine the problem.਀ - Return code 0 - Successful update of all installed HBAs.਀    ⴀ 刀攀琀甀爀渀 挀漀搀攀 ㄀ ⴀ 䄀氀氀 䠀䈀䄀猀 愀爀攀 愀琀 琀栀攀 挀甀爀爀攀渀琀 氀攀瘀攀氀 愀渀搀 渀漀 甀瀀搀愀琀攀 眀愀猀  needed. This is a successful update.਀    ⴀ 刀攀琀甀爀渀 挀漀搀攀猀 ㈀ 愀渀搀 ㌀ ⴀ 匀漀洀攀 漀爀 愀氀氀 漀昀 琀栀攀 愀搀愀瀀琀攀爀猀 昀愀椀氀攀搀 琀漀 甀瀀搀愀琀攀⸀ - Return code 4 - Emulex Applications Kit is not installed. Install the ਀      氀愀琀攀猀琀 唀瀀搀愀琀攀堀瀀爀攀猀猀 䔀洀甀氀攀砀 圀椀渀搀漀眀猀 搀攀瘀椀挀攀 搀爀椀瘀攀爀 愀渀搀 爀攀瀀攀愀琀 琀栀椀猀 唀渀椀瘀攀爀猀愀氀 Boot update. Reboot after installing the driver. If this still doesn't ਀      眀漀爀欀Ⰰ 礀漀甀 挀愀渀 搀漀眀渀氀漀愀搀 愀渀搀 椀渀猀琀愀氀氀 䠀䈀䄀渀礀眀愀爀攀 昀爀漀洀 琀栀攀 䔀洀甀氀攀砀 眀攀戀 猀椀琀攀⸀   The Apps-Kit is a subset of HBAnyware. (You'll need to edit the ਀      甀瀀搀愀琀攀⸀戀愀琀 猀挀爀椀瀀琀 愀渀搀 挀漀洀洀攀渀琀 漀甀琀 氀椀渀攀猀 ㌀ⴀ㄀㘀 琀栀愀琀 椀渀猀琀愀氀氀 琀栀攀 䄀瀀瀀ⴀ䬀椀琀⸀⤀ - Return code 5 - No compatible HBA was found. This is caused by not ਀      栀愀瘀椀渀最 愀 挀漀洀瀀愀琀椀戀氀攀 䠀䈀䄀 椀渀猀琀愀氀氀攀搀Ⰰ 戀礀 愀 搀攀昀攀挀琀椀瘀攀 䠀䈀䄀Ⰰ 漀爀 戀礀 渀漀琀 栀愀瘀椀渀最 the correct device driver installed.਀ ਀ 3.0 Configuration information਀开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开 ਀  一⼀䄀 ਀ 4.0 Unattended Mode਀开开开开开开开开开开开开开开开开开开开开 ਀  吀漀 爀甀渀 琀栀椀猀 瀀愀挀欀愀最攀 椀渀 甀渀愀琀琀攀渀搀攀搀 洀漀搀攀Ⰰ 甀猀攀 琀栀攀 昀漀氀氀漀眀椀渀最 挀漀洀洀愀渀搀㨀 ਀    ∀攀氀砀开昀眀开昀挀开㐀最ⴀ昀㈀⸀㠀　愀㐀ⴀ戀㘀⸀　㈀愀㜀开眀椀渀搀漀眀猀ⴀ戀挀开㌀㈀ⴀ㘀㐀⸀攀砀攀 ⴀ猀∀ ਀                     5.0 Web Sites and Support Phone Number਀开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开开 ਀  漀  夀漀甀 挀愀渀 搀漀眀渀氀漀愀搀 渀攀眀 愀渀搀 甀瀀搀愀琀攀搀 昀椀氀攀猀 昀漀爀 䤀䈀䴀 瀀爀漀搀甀挀琀猀 昀爀漀洀 琀栀攀 䤀䈀䴀  Support Web site:਀ http://www.ibm.com/support/਀ o For the latest list of supported operating systems, see the IBM Server ਀     倀爀漀瘀攀渀 ⴀ 䈀氀愀搀攀䌀攀渀琀攀爀 圀攀戀 猀椀琀攀㨀 ਀     栀琀琀瀀㨀⼀⼀眀眀眀⸀椀戀洀⸀挀漀洀⼀猀攀爀瘀攀爀猀⼀攀猀攀爀瘀攀爀⼀猀攀爀瘀攀爀瀀爀漀瘀攀渀⼀挀漀洀瀀愀琀⼀甀猀⼀攀猀攀爀瘀攀爀⸀栀琀洀氀 ਀  漀  圀椀琀栀 琀栀攀 漀爀椀最椀渀愀氀 瀀甀爀挀栀愀猀攀 漀昀 愀渀 䤀䈀䴀 栀愀爀搀眀愀爀攀 瀀爀漀搀甀挀琀Ⰰ 礀漀甀 栀愀瘀攀 愀挀挀攀猀猀 琀漀  extensive support coverage. During the IBM hardware product warranty ਀     瀀攀爀椀漀搀Ⰰ 礀漀甀 洀愀礀 挀愀氀氀 琀栀攀 䤀䈀䴀 䠀攀氀瀀䌀攀渀琀攀爀 ⠀㄀ⴀ㠀　　ⴀ䤀䈀䴀ⴀ匀䔀刀嘀 椀渀 琀栀攀 唀⸀匀⸀⤀ 昀漀爀  hardware product assistance covered under the terms of the IBM hardware ਀     眀愀爀爀愀渀琀礀⸀ ਀ 6.0 Trademarks and Notices਀开开开开开开开开开开开开开开开开开开开开开开开开开开 ਀  䤀䈀䴀 椀猀 愀 爀攀最椀猀琀攀爀攀搀 琀爀愀搀攀洀愀爀欀 漀昀 䤀渀琀攀爀渀愀琀椀漀渀愀氀 䈀甀猀椀渀攀猀猀 䴀愀挀栀椀渀攀猀 䌀漀爀瀀漀爀愀琀椀漀渀  in the United States and other countries.਀ Windows is a trademark or registered trademark of Microsoft Corporation in ਀  琀栀攀 唀渀椀琀攀搀 匀琀愀琀攀猀 愀渀搀 漀琀栀攀爀 挀漀甀渀琀爀椀攀猀⸀ ਀  伀琀栀攀爀 挀漀洀瀀愀渀礀Ⰰ 瀀爀漀搀甀挀琀Ⰰ 愀渀搀 猀攀爀瘀椀挀攀 渀愀洀攀猀 洀愀礀 戀攀 琀爀愀搀攀洀愀爀欀猀 漀爀 猀攀爀瘀椀挀攀 洀愀爀欀猀 of others.਀ ਀㜀⸀　 䐀椀猀挀氀愀椀洀攀爀 ______________਀ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.਀  䤀䈀䴀 䐀䤀匀䌀䰀䄀䤀䴀匀 䄀䰀䰀 圀䄀刀刀䄀一吀䤀䔀匀Ⰰ 圀䠀䔀吀䠀䔀刀 䔀堀倀刀䔀匀匀 伀刀 䤀䴀倀䰀䤀䔀䐀Ⰰ INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS਀  䘀伀刀 䄀 倀䄀刀吀䤀䌀唀䰀䄀刀 倀唀刀倀伀匀䔀 䄀一䐀 䴀䔀刀䌀䠀䄀一吀䄀䈀䤀䰀䤀吀夀 圀䤀吀䠀 刀䔀匀倀䔀䌀吀 吀伀 吀䠀䔀 INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM਀  䜀刀䄀一吀匀 一伀 䰀䤀䌀䔀一匀䔀匀 吀伀 䄀一夀 倀䄀吀䔀一吀匀 伀刀 䌀伀倀夀刀䤀䜀䠀吀匀⸀ ਀  一漀琀攀 琀漀 唀⸀匀⸀ 䜀漀瘀攀爀渀洀攀渀琀 唀猀攀爀猀 ⴀⴀ 䐀漀挀甀洀攀渀琀愀琀椀漀渀 爀攀氀愀琀攀搀 琀漀 restricted rights -- Use, duplication or disclosure is subject਀  琀漀 爀攀猀琀爀椀挀琀椀漀渀猀 猀攀琀 昀漀爀琀栀 椀渀 䜀匀䄀 䄀䐀倀 匀挀栀攀搀甀氀攀 䌀漀渀琀爀愀挀琀 眀椀琀栀 IBM Corporation.਀   ਀ ਀⠀䔀洀甀氀攀砀ⴀ猀甀瀀瀀氀椀攀搀 刀攀愀搀洀攀 戀攀最椀渀猀 栀攀爀攀⸀⸀⸀⤀ ਀ Emulex Corporation਀ ਀ Light Pulse Family Host Adapter਀                            唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 刀攀氀攀愀猀攀 一漀琀攀猀 ਀ 6.02a7਀ ਀                                   䴀愀爀 ㈀㔀琀栀Ⰰ ㈀　　㠀 ਀ ਀䤀⸀ 䤀渀琀爀漀搀甀挀琀椀漀渀 ਀ This Universal Boot version 6.02a7 contains:਀ (1) x86 BootBIOS version 3.02a6 ਀⠀㈀⤀ 伀瀀攀渀䈀漀漀琀      瘀攀爀猀椀漀渀 ㌀⸀㄀　愀　  (3) EFIBoot version 4.00a1਀ For detailed information about x86 BootBIOS, please refer to section II below,਀昀漀爀 伀瀀攀渀䈀漀漀琀Ⰰ 猀攀挀琀椀漀渀 䤀䤀䤀Ⰰ 愀渀搀 昀漀爀 䔀䘀䤀䈀漀漀琀Ⰰ 猀攀挀琀椀漀渀 䤀嘀⸀  吀栀椀猀 唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 挀愀渀  boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other ਀眀漀爀搀猀Ⰰ 琀栀攀 瀀氀愀琀昀漀爀洀 椀猀 琀爀愀渀猀瀀愀爀攀渀琀 愀渀搀 琀栀攀 甀猀攀爀 猀栀漀甀氀搀 渀漀琀 戀攀 挀漀渀挀攀爀渀攀搀 眀椀琀栀 愀渀礀  differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.਀ Universal Boot is a complete image, whenever it is enabled by any Emulex OS ਀甀琀椀氀椀琀礀Ⰰ 琀栀攀 眀栀漀氀攀 椀洀愀最攀 ⠀砀㠀㘀 䈀漀漀琀䈀䤀伀匀Ⰰ 伀瀀攀渀䈀漀漀琀 愀渀搀 䔀䘀䤀䈀漀漀琀⤀ 椀猀 攀渀愀戀氀攀搀⸀  吀栀椀猀  is also true for disable.਀ ਀䘀椀氀攀猀 椀渀挀氀甀搀攀搀 椀渀 琀栀椀猀 爀攀氀攀愀猀攀㨀 ਀尀㘀　㈀愀㜀⸀琀砀琀        琀栀椀猀 昀椀氀攀 礀漀甀 愀爀攀 爀攀愀搀椀渀最 \HU602a7.PRG LP9802 Universal Boot਀尀吀唀㘀　㈀愀㜀⸀倀刀䜀      䰀倀㄀　　　　    唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 \BU602a7.PRG LP11000 Universal Boot਀尀娀唀㘀　㈀愀㜀⸀倀刀䜀      䰀倀攀㄀㄀　　　   唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 ਀尀攀氀砀挀氀椀㐀　　愀㄀⸀攀昀椀  䔀䘀䤀 㐀⸀　　愀㄀ 䐀爀椀瘀攀爀 ਀ Universal Boot Load Procedure਀ The Light Pulse Universal Boot is distributed as a .PRG file. This file may be ਀搀漀眀渀氀漀愀搀攀搀 琀漀 琀栀攀 䄀搀愀瀀琀攀爀 甀猀椀渀最 琀栀攀 昀椀爀洀眀愀爀攀 甀瀀最爀愀搀攀 瀀爀漀挀攀搀甀爀攀 眀椀琀栀 琀栀攀 昀漀氀氀漀眀椀渀最  Utility in Various systems. ਀ 1. "Drvcfg" : EFI based Systems. ਀ Please refer to section 4 in EFIBoot for user interface how to download ਀     唀渀椀瘀攀爀猀愀氀 䈀漀漀琀 椀渀 䔀䘀䤀 戀愀猀攀搀 猀礀猀琀攀洀猀⸀ ਀  ㈀⸀ 䰀倀㘀䐀唀吀䤀䰀⸀䔀堀䔀              㨀 䐀伀匀 戀愀猀攀搀 甀琀椀氀椀琀礀⸀ ਀     倀氀攀愀猀攀 爀攀昀攀爀 琀漀 琀栀攀 䰀倀㘀䐀唀吀䤀䰀 瘀攀爀猀椀漀渀 㤀⸀　愀㄀㌀Ⰰ 漀爀 氀愀琀攀爀Ⰰ 搀漀挀甀洀攀渀琀愀琀椀漀渀 昀漀爀 甀猀攀爀 interface how to download EFIBoot in DOS PCI systems.਀ 3. LPUTILNT : Windows Miniport Driver.਀ Please refer to the utility user manual for details on using the above tool.਀ 4. Emulex Configuration Tool : Windows Port Driver.਀ Please refer to the elxcfg user manual for details on using the above tool.਀ ਀⼀⨀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ⨀⼀ /* History */਀⼀⨀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ⨀⼀ Problems Fixed, Features added or Other Updates Since 6.00a0:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀䤀䤀⸀ 砀㠀㘀 䈀漀漀琀䈀䤀伀匀 ਀吀栀攀 挀甀爀爀攀渀琀 䈀漀漀琀䈀䤀伀匀 瀀爀漀瘀椀搀攀猀 砀㠀㘀 戀漀漀琀 挀愀瀀愀戀椀氀椀琀礀 琀栀爀漀甀最栀 琀栀攀 甀猀攀 漀昀 䤀一吀㄀㌀ 猀礀猀琀攀洀  BIOS calls. The BootBIOS supports:਀ (1) Multi-topology: Fabric Point to Point, FC-AL, Private loop and Public loop ਀⠀㈀⤀  䴀甀氀琀椀ⴀ椀渀椀琀椀愀琀漀爀猀㨀 唀瀀 琀漀 㠀 愀搀愀瀀琀攀爀猀 椀渀 愀 猀礀猀琀攀洀 (3) Multi-LUNs: Up to 256 LUNs ਀⠀㐀⤀  䴀甀氀琀椀ⴀ戀漀漀琀㨀 椀琀 挀漀洀瀀氀椀攀猀 眀椀琀栀 琀栀攀 䈀䤀伀匀 䈀漀漀琀 匀瀀攀挀椀昀椀挀愀琀椀漀渀 ⠀䈀䈀匀⤀⸀ (5) EDD (Enhanced Disk Drive Services): it supports both EDD 3.0 and EDD 2.1 ਀     搀攀瀀攀渀搀椀渀最 漀渀 琀栀攀 猀攀氀攀挀琀椀漀渀 洀愀搀攀 椀渀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀⸀  (6) Boot fail over feature: This was implemented in BootBIOS version 1.20. There ਀     愀爀攀 攀椀最栀琀 戀漀漀琀 攀渀琀爀椀攀猀 琀栀愀琀 挀愀渀 戀攀 挀漀渀昀椀最甀爀攀搀⸀  䤀昀 琀栀攀 昀椀爀猀琀 戀漀漀琀 攀渀琀爀礀 昀愀椀氀猀  for any reason, it is still able to boot from the second configured boot ਀     攀渀琀爀礀 愀渀搀 猀漀 漀渀⸀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀㄀⸀ 䠀椀猀琀漀爀礀㨀 ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ 3.02a6਀                            Problems fixed, features added or other updates since 3.02a5:਀  1. Return BOFM signature in edi for BOFM commands. (CR29323)਀ 2. Added additional CLP region check. (CR29324) ਀ 3. Start filling in the XROM Version Number field (0x12) in the PCIR data ਀    猀琀爀甀挀琀甀爀攀⸀ ⠀䌀刀㈀㤀㌀㈀㈀⤀  *******************************************************************************਀                           ㌀⸀　㈀愀㔀 ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　㈀愀㄀㨀 ਀㄀⸀  䴀漀瘀攀搀 琀栀攀 䈀伀䘀䴀 挀漀搀攀 愀昀琀攀爀 堀刀伀䴀 洀愀猀琀攀爀 挀栀攀挀欀椀渀最 挀漀搀攀 琀漀 攀渀猀甀爀攀 琀栀愀琀 䈀伀䘀䴀  commands are only performed by the master XROM. (CR27815)਀ 2. BOFM PARM command fixes. (CR27906)਀  ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ 3.02a4਀                            Problems fixed, features added or other updates since 3.02a3:਀  1. Added code to initialize a flash memory region that is now used in CLP/BOFM ਀    挀漀搀攀 ⠀䌀刀㈀㜀㜀㔀㜀⤀  ਀㈀⸀  䘀椀砀攀搀 愀 爀甀渀琀椀洀攀 䤀一吀ⴀ㄀㌀ 戀漀漀琀 椀猀猀甀攀 搀攀琀攀挀琀椀渀最 眀栀攀渀 漀甀爀 栀漀猀琀 洀攀洀漀爀礀 椀猀 洀漀瘀攀搀 戀礀  another device. (CR27758) ਀ *******************************************************************************਀                           ㌀⸀　㈀愀㌀ ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　㈀愀㄀㨀 ਀㄀⸀  䘀椀砀攀搀 愀 䈀伀䘀䴀 椀猀猀甀攀 眀栀攀渀 瀀爀漀挀攀猀猀椀渀最 琀栀攀 倀䄀刀䴀 挀漀洀洀愀渀搀 眀栀攀爀攀 琀栀攀 琀栀攀 琀愀爀最攀琀 information would get overwritten. (CR27607) ਀     2. Fixed BOFM PARM command target errors. (CR27665) ਀ *******************************************************************************਀ 3.02a1਀                            Problems fixed, features added or other updates since 3.02a0:਀  1. PCI 3.0 fix (non PnP), to adjust the XROM's INT-13 vector to correctly point ਀    琀漀 琀栀攀 爀攀氀漀挀愀琀攀搀 爀甀渀琀椀洀攀 堀刀伀䴀 氀漀挀愀琀椀漀渀⸀ ⠀䌀刀㈀㜀㔀㘀㔀⤀  ਀㈀⸀  䘀椀砀攀搀 甀渀椀渀琀攀渀琀椀漀渀愀氀 䤀渀琀攀爀爀甀瀀琀 琀愀戀氀攀 眀爀椀琀攀猀⸀ ⠀䌀刀㈀㜀㔀㘀㔀⤀ ਀㌀⸀  䘀椀砀攀搀 愀 䈀伀䘀䴀 倀䄀刀䴀 挀漀洀洀愀渀搀 椀猀猀甀攀 眀栀攀爀攀 漀渀氀礀 琀栀攀 昀椀爀猀琀 琀眀漀 攀渀琀爀椀攀猀 椀渀 琀栀攀  BOFM table would be searched for targets. (CR27565)਀ *******************************************************************************਀                           ㌀⸀　㈀愀　 ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　㄀愀　㨀 ਀㄀⸀  䄀搀搀攀搀 䈀伀䘀䴀 猀甀瀀瀀漀爀琀⸀ ⠀䌀刀㈀㔀　㘀㌀⤀ ਀㈀⸀  䘀椀砀攀搀 愀渀 愀甀琀漀猀挀愀渀 椀猀猀甀攀 眀栀攀爀攀 漀渀 猀漀洀攀 猀礀猀琀攀洀猀 愀甀琀漀猀挀愀渀 眀漀甀氀搀 find the target but could not boot from it. (CR27003)਀ 3. Fixed an issue where not all configured boot devices would be displayed ਀    漀渀 琀栀攀 猀挀爀攀攀渀 愀渀搀 䘀䐀䤀匀䬀 眀漀甀氀搀 渀漀琀 戀攀 愀戀氀攀 琀漀 愀搀搀爀攀猀猀 愀氀氀 搀爀椀瘀攀猀⸀  (CR27094)਀ 4. Changed the Lp950 to display as Lp952. (CR26629)਀ 5. Fixed an issue on some systems where the adapter information in the ਀    挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 挀漀甀氀搀 渀漀琀 戀攀 搀椀猀瀀氀愀礀攀搀 愀渀搀 琀栀攀 甀琀椀氀椀琀礀 挀漀甀氀搀 最攀琀  stuck when trying to configure a boot LUN. (CR26774)਀ 6. Fixed an issue booting from some system when the LUN was 128 or higher. ਀    ⠀䌀刀㈀㘀㤀㄀㈀⤀ ਀㜀⸀  䘀椀砀攀搀 愀渀 愀甀琀漀猀挀愀渀 椀猀猀甀攀 眀栀攀爀攀 漀渀 猀漀洀攀 猀礀猀琀攀洀猀 愀甀琀漀猀挀愀渀 眀漀甀氀搀 find the target but could not boot from it. (CR27003)਀ 8. Missing PCI boot information when booting from a configured boot device.਀    ⠀䌀刀㈀㜀　㈀㠀⤀ ਀㤀⸀  䘀椀砀攀搀 愀 戀甀最 椀渀 琀栀攀 䌀䰀倀 洀攀洀漀爀礀 爀攀猀琀漀爀椀渀最 爀漀甀琀椀渀攀 琀栀愀琀 挀漀甀氀搀 漀瘀攀爀眀爀椀琀攀 EBDA memory in certain configurations. (CR26473)਀     10. Fixed an issue that could cause a delay in booting from a hard disk ਀    愀琀琀愀挀栀攀搀 琀漀 琀栀攀 愀搀愀瀀琀攀爀 眀栀攀渀 愀 戀漀漀琀愀戀氀攀 䌀䐀ⴀ刀伀䴀 椀猀 椀渀 琀栀攀 䌀䐀 琀爀愀礀⸀ (CR26272) ਀ 11. Fixed a potential INT-15 interrupt issue that could occur on systems that ਀    搀漀 渀漀琀 栀愀瘀攀 愀渀 䔀砀琀攀渀搀攀搀 䈀䤀伀匀 䐀愀琀愀 䄀爀攀愀 ⠀䔀䈀䐀䄀⤀⸀  ⠀䌀刀㈀㘀㈀㔀㈀⤀ ਀㄀㈀⸀ 䔀渀栀愀渀挀攀搀 琀栀攀 䌀䰀倀 搀攀昀愀甀氀琀 挀漀洀洀愀渀搀 漀瀀攀爀愀琀椀漀渀 琀漀 挀栀攀挀欀 瀀爀攀瘀椀漀甀猀 瘀愀氀甀攀猀 戀攀昀漀爀攀  doing a flash update. (CR26459)਀ 13. Ensured that restarting adapters will restart all adapters in the system. ਀    ⠀䌀刀㈀㘀㐀㜀㘀⤀ ਀㄀㐀⸀ 䘀椀砀攀搀 愀 䘀椀戀爀攀 挀栀愀渀渀攀氀 椀猀猀甀攀 眀栀攀爀攀 愀 猀攀挀漀渀搀 䘀䰀伀䜀䤀 椀猀 椀猀猀甀攀搀 椀渀 琀栀攀 愀搀愀瀀琀攀爀  configuration utility without logging out from the first FLOGI. (CR26560)਀ 15. Fixed a screen display problem where the initial load of the Boot BIOS ਀    眀椀氀氀 搀椀猀瀀氀愀礀 ∀䐀椀猀愀戀氀攀∀ 椀渀猀琀攀愀搀 漀昀 ∀䐀椀猀愀戀氀攀搀∀ 昀漀爀 琀栀攀 愀搀愀瀀琀攀爀 猀琀愀琀甀猀⸀  (CR23874)਀ 16. Fixed an issue booting when the LUN was set to 255. (CR26587)਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㌀⸀　㄀愀　 ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　　愀㐀㨀 ਀㄀⸀  倀漀爀琀攀搀 昀椀砀攀猀 漀瘀攀爀 昀爀漀洀 琀栀攀 ㈀⸀　　愀㄀ 挀漀搀攀 戀愀猀攀 ⠀䌀刀㈀㔀㔀　㜀⤀  ਀㈀⸀  䘀椀砀攀搀 愀渀 椀猀猀甀攀 眀栀攀爀攀 琀栀攀 渀甀洀戀攀爀 漀昀 猀攀挀琀漀爀猀 眀愀猀 渀漀琀 爀攀瀀漀爀琀攀搀 挀漀爀爀攀挀琀氀礀 昀漀爀  INT13h, Funtion 48h that caused FDISK32 to fail in some cases. (CR24867) ਀     3. Removed an I/O quiesce before resetting an adapter. (CR25504) ਀ 4. Added alternative CLP commands to set the WWNN, WWPN, and SERDES data. ਀    ⠀䌀刀㈀㔀㘀㈀㠀⤀ *******************************************************************************਀ 3.00a4਀                            Problems fixed, features added or other updates since 3.00a3:਀  1. Fixed an issue where a boot BIOS message was overwritting a system BIOS ਀    洀攀猀猀愀最攀 㰀䘀㤀㸀 漀渀 琀栀攀 猀挀爀攀攀渀 搀椀猀瀀氀愀礀⸀ ⠀䌀刀㈀　㌀㄀㌀⤀  ਀㈀⸀  䘀椀砀攀搀 猀攀瘀攀爀愀氀 椀猀猀甀攀猀 眀栀攀爀攀 䌀䰀倀 挀漀洀洀愀渀搀猀 眀漀甀氀搀 挀漀洀瀀氀攀琀攀 猀甀挀挀猀昀甀氀氀礀 漀渀 愀 debug development system but would not work correctly on the real HW. ਀    ⠀䌀刀㈀㈀　㠀㄀ 愀渀搀 䌀刀㈀㌀㌀㐀㤀⤀  ਀㌀⸀  䄀搀搀攀搀 渀攀眀 昀攀愀琀甀爀攀 栀愀渀搀氀椀渀最 漀昀 琀栀攀 䌀䰀倀 ∀搀攀昀愀甀氀琀∀ 挀漀洀洀愀渀搀 琀栀愀琀 眀愀猀 洀椀猀猀椀渀最 from the original implementation. (CR23166) ਀      *******************************************************************************਀ ਀                           ㌀⸀　　愀㌀ ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　　愀㈀㨀 ਀㄀⸀  䘀椀砀攀搀 愀 搀攀瘀椀挀攀 猀挀愀渀 愀渀搀 搀椀猀瀀氀愀礀 戀甀最 挀愀甀猀椀渀最 䄀䰀倀䄀 　 漀渀 愀 搀椀爀攀挀琀 挀漀渀渀攀挀琀 FC-AL not to be displayed in the configuration utility. (CR21866) ਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㌀⸀　　愀㈀ ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㌀⸀　　愀㄀㨀 ਀㄀⸀  䘀椀砀攀搀 愀 琀礀瀀漀 愀猀猀漀挀椀愀琀攀搀 眀椀琀栀 猀漀洀攀 䌀䰀倀 猀琀爀椀渀最猀⸀ ⠀䌀刀㈀　㌀㤀㠀⤀   ਀ *******************************************************************************਀ 3.00a1਀                            Problems fixed, features added or other updates since 3.00a0:਀  1. Fixed an issue with the error path not restoring EBDA:0 and 40:0e when an ਀    攀爀爀漀爀 漀挀挀甀爀爀攀搀 椀渀 䤀一䤀吀 挀漀搀攀 氀漀最椀渀 眀栀攀爀攀 瀀攀爀洀愀渀攀渀琀 洀攀洀漀爀礀 栀愀搀 戀攀攀渀 漀戀琀愀椀渀攀搀   by the adapter. (CR20121) ਀  2. Fixed an issue with the CLP code and the way it was restoring BIOS Data Area ਀    洀攀洀漀爀礀 椀渀 琀栀攀 栀漀猀琀 猀礀猀琀攀洀⸀ ⠀䌀刀㈀　㄀㈀㄀⤀  ਀㌀⸀  䄀搀搀攀搀 猀甀瀀瀀漀爀琀 昀漀爀 愀氀氀漀眀椀渀最 琀栀攀 欀攀礀 猀攀焀甀攀渀挀攀 㰀䌀吀刀䰀ⴀ䔀㸀 琀漀 攀渀琀攀爀 琀栀攀 䔀洀甀氀攀砀  BIOS configuration utility. (CR19873)਀  4. Added explicit screen display confirmation to the user when ਀    漀爀 㰀䌀吀刀䰀ⴀ䔀㸀 栀愀猀 戀攀攀渀 瀀爀攀猀猀攀搀 琀漀 攀渀琀攀爀 琀栀攀 䔀洀甀氀攀砀 䈀䤀伀匀 挀漀渀昀椀最甀爀愀琀椀漀渀  utility. (CR19710)਀  5. Updated the displayed copyright messages. (CR19874)਀  6. Changed the order of some of the internal adapter commands to ensure better ਀    昀甀渀挀琀椀漀渀愀氀椀琀礀⸀ ⠀䌀刀㄀㤀㤀㌀㌀⤀ ਀㜀⸀  䐀椀猀瀀氀愀礀 琀栀攀 昀甀氀氀 倀䌀䤀 愀搀愀瀀琀攀爀 椀渀昀漀爀洀愀琀椀漀渀 ⠀戀甀猀Ⰰ 搀攀瘀椀挀攀Ⰰ 愀渀搀 昀甀渀挀琀椀漀渀⤀ 昀漀爀  easier identification of the selected adapter. added displaying the status ਀    漀昀 琀栀攀 䈀漀漀琀䈀䤀伀匀 ⠀攀渀愀戀氀攀搀⼀搀椀猀愀戀氀攀搀⤀漀渀 琀栀攀 愀搀愀瀀琀攀爀 猀挀爀攀攀渀⸀ ⠀䌀刀㈀　　㄀㈀⤀ ਀㠀⸀  䘀椀砀攀搀 愀渀 椀猀猀甀攀 眀栀攀爀攀 琀栀攀 愀搀愀瀀琀攀爀 挀愀爀搀 眀漀甀氀搀 最椀瘀攀 甀瀀 漀渀 搀攀琀攀挀琀椀渀最  drives/arrays that did not present themselves "ready" after 2 SCSI਀    吀攀猀琀 唀渀椀琀 刀攀愀搀 挀漀洀洀愀渀搀猀⸀ ⠀䌀刀㈀　㄀㈀㠀⤀ ਀㤀⸀  䘀椀砀攀搀 愀 戀漀漀琀 洀椀最爀愀琀椀漀渀 椀猀猀甀攀 漀渀 猀漀洀攀 搀椀猀欀 愀爀爀愀礀猀⸀ ⠀䌀刀㈀　㄀㈀㤀⤀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㌀⸀　　䄀　 ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㈀⸀　　䄀　㨀 ਀㄀⸀  䄀搀搀攀搀 倀䌀䤀 昀椀爀洀眀愀爀攀 ㌀⸀　 猀甀瀀瀀漀爀琀⸀ 吀栀攀 戀漀漀琀 䈀䤀伀匀 栀愀猀 戀攀攀渀 甀瀀搀愀琀攀搀 琀漀  support the required features for host system's that have implemented ਀    琀栀攀 倀䌀䤀 昀椀爀洀眀愀爀攀 猀瀀攀挀椀昀椀挀愀琀椀漀渀 爀攀瘀椀猀椀漀渀 ㌀⸀　⸀ ⠀䌀刀㄀㜀㐀　㜀⤀   ਀㈀⸀  䌀栀愀渀最攀搀 挀漀洀洀愀渀搀 琀椀洀攀漀甀琀猀 琀漀 戀攀 ㌀　 猀攀挀漀渀搀猀 昀爀漀洀 㔀 猀攀挀漀渀搀猀 昀漀爀 䠀䈀䄀 猀瀀攀挀椀昀椀挀  commands. (CR17414)਀ 3. Added support for the Lpe1000, Lpe1150, Lpe11000, and the Lpe111 Host Bus਀    䄀搀愀瀀琀攀爀 ⠀䠀䈀䄀⤀ 挀愀爀搀猀⸀ ⠀䌀刀㄀㜀㜀㐀㠀⤀ ਀㐀⸀  䔀渀栀愀渀挀攀搀 琀栀攀 挀漀搀攀 琀漀 爀攀琀爀礀 愀 昀愀戀爀椀挀 氀漀最椀渀 甀瀀 琀漀 㔀 琀椀洀攀猀 椀昀 琀栀攀 昀愀戀爀椀挀 氀漀最椀渀  fails during a rediscovery process. (CR17750)਀     5. Fixed a bug where the device ID in the rediscovery code was not getting ਀    甀瀀搀愀琀攀搀 眀椀琀栀 琀栀攀 氀愀琀攀猀琀 搀攀瘀椀挀攀 椀搀Ⰰ 戀甀琀 椀渀猀琀攀愀搀 眀愀猀 甀猀椀渀最 琀栀攀 漀氀搀 搀攀瘀椀挀攀 椀搀⸀ (CR17750)਀ 6. Enhanced the mechanism in which host memory used by the adapter card is ਀    氀漀挀愀琀攀搀⸀ ⠀䌀刀㄀㜀㐀　㜀Ⰰ 䌀刀㄀㜀㜀㔀　Ⰰ 䌀刀㄀㐀㘀㌀㤀⤀ ਀㜀⸀  䄀搀搀攀搀 愀渀 䄀倀䤀 昀漀爀 䐀䴀吀䘀 䌀漀洀洀愀渀搀 䰀椀渀攀 倀爀漀琀漀挀漀氀 ⠀䌀䰀倀⤀⸀  to support the blade mezzanine HBA. (CR17751)਀     8. Fixed a potential bug when obtaining memory on a host system that ਀    搀漀攀猀 渀漀琀 猀甀瀀瀀漀爀琀 琀栀攀 䔀砀琀攀渀搀攀搀 䈀䤀伀匀 䐀愀琀愀 䄀爀攀愀 ⠀䔀䈀䐀䄀⤀⸀ ⠀䌀刀㄀㜀㠀㤀㄀⤀ ਀㤀⸀  䄀搀搀攀搀 愀 眀漀爀欀愀爀漀甀渀搀 昀漀爀 猀漀洀攀 䠀漀猀琀 䈀甀猀 䄀搀愀瀀琀攀爀猀 挀愀爀搀猀 眀栀攀爀攀 琀栀攀 嘀倀䐀 搀愀琀愀   could potentially be reported incorrectly. (CR18169)਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㈀⸀　　䄀　 ਀    倀爀漀戀氀攀洀猀 昀椀砀攀搀Ⰰ 昀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 漀琀栀攀爀 甀瀀搀愀琀攀猀 猀椀渀挀攀 ㄀⸀㜀　䄀㌀㨀 ਀㄀⸀  䘀椀砀攀搀 愀 戀甀最 眀栀攀爀攀 琀栀攀 愀搀愀瀀琀攀爀 䈀䤀伀匀 眀愀猀 渀漀琀 爀攀猀琀漀爀椀渀最 愀 猀礀猀琀攀洀 䈀䤀伀匀 瘀愀爀椀愀戀氀攀    when the user hit the key to skip the Emulex adapter boot BIOS. ਀    ⠀䌀刀㄀㔀㘀㠀㔀⤀ ਀㈀⸀  䴀漀瘀攀搀 琀栀攀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 䰀唀一 瀀漀瀀 甀瀀 眀椀渀搀漀眀 氀漀眀攀爀 搀漀眀渀 漀渀 琀栀攀 猀挀爀攀攀渀    so that it does not obscure the bottom 4 boot entry options. (CR15424)਀ 3. Fixed a bug where only the first 16 supported Emulex adapter cards in the ਀    猀礀猀琀攀洀 眀漀甀氀搀 戀攀 椀猀猀甀攀搀 愀 爀攀猀攀琀 椀渀猀琀攀愀搀 漀昀 琀栀攀 洀愀砀椀洀甀洀 猀甀瀀瀀漀爀琀攀搀 䔀洀甀氀攀砀  adapter cards. (CR15801)਀     4. Fixed a bug where the adapter BIOS was inadvertently checking one too many ਀    䄀䰀倀䄀 椀搀猀⸀ ⠀䌀刀㄀㔀㜀㜀㈀⤀   ਀㔀⸀  䌀栀愀渀最攀搀 琀栀攀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 椀渀瀀甀琀 漀瀀琀椀漀渀 昀漀爀 猀攀氀攀挀琀椀渀最 琀栀攀 䄀甀琀漀  Sector Format Select menu item from hex value (A) to a decimal value (10)਀    琀漀 戀攀 挀漀渀猀椀猀琀攀渀琀 眀椀琀栀 琀栀攀 漀琀栀攀爀 洀攀渀甀 椀琀攀洀 挀栀漀椀挀攀猀⸀ ⠀䌀刀㄀㐀㈀㐀㌀⤀  ਀㘀⸀  唀瀀搀愀琀攀搀 攀嘀倀䐀 猀挀愀渀渀椀渀最 愀渀搀 瀀愀爀猀椀渀最 挀漀搀攀⸀ 䌀漀搀攀 渀漀眀 瀀愀爀猀攀猀 昀漀爀 愀渀礀 猀椀稀攀 攀嘀倀䐀⸀  (CR15252) ਀ 7. Updated the adapter model displayed on the screen to be up to 15 ਀    挀栀愀爀愀挀琀攀爀猀⸀ ⠀䌀刀㄀㔀㐀㄀㈀⤀     ਀㠀⸀  䔀渀栀愀渀挀攀搀 琀栀攀 洀攀琀栀漀搀 琀栀愀琀 琀栀攀 愀搀愀瀀琀攀爀 甀猀攀猀 琀漀 氀漀挀愀琀攀 愀渀搀 愀挀挀攀猀猀 琀栀攀   adapter's variables located in host memory. (CR15838) ਀ ਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㄀⸀㜀　䄀㌀ Problems Fixed, Features added or Other Updates Since 1.70A2:਀ 1. Feature added to increase scan the eVPD data area up to 1024 bytes in VPD data ਀    昀椀攀氀搀Ⰰ 愀渀搀 琀漀 瀀愀爀猀攀 琀栀攀 攀渀琀椀爀攀 嘀倀䐀 搀愀琀愀 琀漀 昀椀渀搀 琀栀攀 愀瀀瀀爀漀瀀爀椀愀琀攀 攀嘀倀䐀 fields and use them. (CR15558)਀ 2. If there are two or more different HBAs with VPD support on the system, the banner਀    搀椀猀瀀氀愀礀 眀椀氀氀 愀氀眀愀礀猀 搀椀猀瀀氀愀礀 琀栀攀 猀愀洀攀 䠀䈀䄀 戀愀渀渀攀爀 眀栀攀渀 瀀爀攀猀猀 猀 ⠀琀漀 猀欀椀瀀 琀栀攀 戀椀漀猀 猀挀愀渀⤀⸀ The new released fixed this issue. (CR15469)਀ 3. Per the FC-GS4 spec, all CT commands shall have a timeout value of 3 x R_A_TOV ਀    椀渀猀琀攀愀搀 漀昀 ㈀ 琀椀洀攀猀⸀  ⠀䌀刀㄀㔀㔀㔀㤀⤀ ਀㐀⸀  䌀栀愀渀最攀搀 琀栀攀 渀攀眀 戀愀渀渀攀爀 搀椀猀瀀氀愀礀 漀渀 堀㠀㘀 戀漀漀琀 眀椀琀栀 琀栀攀 䔀洀甀氀攀砀 挀漀瀀礀爀椀最栀琀⸀ ⠀䌀刀㄀㔀㔀㘀　⤀   ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㄀⸀㜀　䄀㈀ Problems Fixed, Features added or Other Updates Since 1.70A1:਀ 1. The Boot Bios Using the d command in the bios config screen leaves adapter with ਀    栀愀爀搀 䄀䰀倀䄀 漀昀 ㄀Ⰰ 琀栀椀猀 猀攀琀琀椀渀最 挀愀渀 挀愀甀猀攀猀 挀漀渀昀甀猀椀漀渀 昀漀爀 挀甀猀琀漀洀攀爀猀 眀栀椀挀栀 漀甀爀 䠀䈀䄀 comes from the factory with a default hard alpa of zero. The new fix will set਀    琀栀攀 搀攀昀愀甀氀琀 栀愀爀搀 䄀䰀倀䄀 漀昀 稀攀爀漀⸀ ⠀䌀刀㄀　㈀㐀㄀⤀   ਀㈀⸀  䘀愀椀氀 琀漀 搀攀琀攀挀琀 琀栀攀 䔀䴀䌀 挀砀㈀　　 眀栀攀渀 挀漀渀渀攀挀琀 搀椀爀攀挀琀氀礀 琀漀 琀栀攀 䰀倀㤀㔀㈀Ⰰ 戀攀挀愀甀猀攀 椀琀  fails to discover ALPA EF in direct connect configuration. The new fix will਀    琀愀欀攀猀 挀愀爀攀 琀栀椀猀 椀猀猀甀攀⸀ ⠀䌀刀㄀㄀㌀　㈀⤀ ਀㌀⸀  䘀椀砀攀搀 琀栀攀 戀甀最 眀栀椀挀栀 昀愀椀氀猀 琀漀 搀椀猀挀漀瘀攀爀 䄀䰀倀䄀 䔀䘀 椀渀 瀀爀椀瘀愀琀攀 氀漀漀瀀 挀漀渀昀椀最甀爀愀琀椀漀渀⸀ (CR11902)਀ 4. Multiple reboots causes link to not come up, boot failure. The new fix takes਀    挀愀爀攀 琀栀椀猀 椀猀猀甀攀 戀礀 爀攀洀漀瘀攀搀 琀栀攀 甀瀀搀愀琀攀 渀瘀爀愀洀 搀甀爀椀渀最 琀栀攀 椀渀椀琀开昀昀⸀ ⠀䌀刀㄀㈀　㄀㌀⤀ ਀㔀⸀  匀甀瀀瀀漀爀琀攀搀 䔀ⴀ嘀倀䐀Ⰰ 椀昀 攀ⴀ嘀倀䐀 昀椀攀氀搀猀 愀爀攀 攀洀瀀琀礀 漀爀 戀氀愀渀欀 漀渀 琀栀攀 䠀䈀䄀 琀栀攀渀 琀栀攀 䠀䈀䄀  will identified as it is today, if VPD HBA Model number info is present, then਀    搀椀猀瀀氀愀礀 琀栀攀 渀攀眀 嘀倀䐀 䠀䈀䄀 䴀漀搀攀氀 渀甀洀戀攀爀⸀  ⠀䌀刀㄀㐀㠀㔀㌀⤀ ਀㘀⸀  匀甀瀀瀀漀爀琀攀搀 洀漀爀攀 䠀䈀䄀 猀甀挀栀 愀猀 䰀瀀㄀㄀　　　Ⰰ 䰀瀀㄀㄀㔀　Ⰰ 䰀瀀㄀㄀㄀Ⰰ 䰀瀀攀㄀㄀　　　Ⰰ 䰀瀀攀㄀㄀㔀　Ⰰ 䰀瀀攀㄀㄀㄀Ⰰ Lp10000, Lp101, Lp11000. and Lpe11000. (CR14854)਀ 7. In some system server, there is issue which mishandling the memory read-only ਀    洀漀搀攀 搀甀爀椀渀最 琀栀攀 爀甀渀琀椀洀攀Ⰰ 眀栀椀挀栀 爀攀猀甀氀琀猀 椀渀 爀攀琀爀椀攀猀 甀渀琀椀氀 琀栀攀 猀礀猀琀攀洀 琀椀洀攀猀 漀甀琀 愀渀搀 resets. The new "X" build will remove some variables in runtime library, and ਀    欀攀攀瀀 琀栀漀猀攀 瘀愀爀椀愀戀氀攀猀 椀渀 琀栀攀 椀渀椀琀ⴀ琀椀洀攀⸀ ⠀䌀刀㄀㈀㌀㄀㐀⤀ ਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀                           ㄀⸀㜀　䄀㄀ Problems Fixed, Features added or Other Updates Since 1.70A0:਀ 1. During the BIOS login, when HBA receives the Unit Attention, the BIOS gave two ਀    琀椀洀攀猀 爀攀琀爀礀 昀漀爀 琀栀攀 吀攀猀琀开唀渀椀琀开刀攀愀搀礀 挀漀洀洀愀渀搀Ⰰ 琀栀椀猀 爀攀氀攀愀猀攀 眀椀氀氀 椀渀挀爀攀猀攀 甀瀀琀漀 昀椀瘀攀 times retry for TUR when HBA receives the Unit Attention. (CR9429)਀ 2. Move hard_alpa variable to common region area. (CR10079) ਀ 3. Added LP101 support. (CR10080)਀ ***********************************************************************************਀ 1.70A0਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㄀⸀㘀㌀䄀㈀㨀 ਀⨀  圀栀攀渀 匀琀愀爀琀 唀渀椀琀 䌀漀洀洀愀渀搀 椀猀 攀渀愀戀氀攀Ⰰ 琀栀攀爀攀 猀栀漀甀氀搀 戀攀 吀攀猀琀ⴀ唀渀椀琀ⴀ刀攀愀搀礀 挀漀洀洀愀渀搀猀 椀猀猀甀攀搀 after follow the Inquiry command during the process of scan disk target function.਀   䄀渀搀 琀栀椀猀 挀愀甀猀攀搀 琀栀攀 戀漀漀琀 昀愀椀氀甀爀攀 椀昀 䰀唀一㄀ 昀爀漀洀 琀栀攀 瀀爀椀洀愀爀礀 瀀愀琀栀 眀愀猀 搀攀氀攀琀攀搀 愀渀搀 眀愀猀 expecting to boot from LUN1 on the secondary path. The new release added the TUR਀   昀漀氀氀漀眀 琀栀攀 䤀渀焀甀椀爀礀 挀漀洀洀愀渀搀 愀渀搀 洀愀欀攀猀 䘀䌀 戀漀漀琀 猀甀挀挀攀猀猀 漀渀 猀攀挀漀渀搀愀爀礀 瀀愀琀栀⸀ ਀⨀  吀栀攀爀攀 椀猀 搀椀猀瀀氀愀礀 攀爀爀漀爀 椀渀 䈀䤀伀匀 甀琀椀氀椀琀礀 洀攀渀甀 漀渀 ㌀ 搀椀最椀琀 愀搀愀瀀琀攀爀 挀愀爀搀Ⰰ 猀甀挀栀 愀猀 䰀瀀㤀㠀㈀ in previous release code, the new release clean up the display error and fixed the਀   椀猀猀甀攀⸀   ਀ ***********************************************************************************਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀ ਀㈀⸀ 䈀䤀伀匀 䰀漀愀搀 倀爀漀挀攀搀甀爀攀 ਀吀栀攀 䰀椀最栀琀 倀甀氀猀攀 䈀䤀伀匀 椀猀 搀椀猀琀爀椀戀甀琀攀搀 愀猀 愀 ⸀倀刀䜀 昀椀氀攀⸀  吀栀椀猀 昀椀氀攀 洀愀礀 戀攀 搀漀眀渀氀漀愀搀攀搀  to the Adapter using the firmware upgrade procedure with the DOS based ਀甀琀椀氀椀琀礀 䰀倀㘀䐀唀吀䤀䰀⸀䔀堀䔀Ⰰ 漀爀 攀椀琀栀攀爀  圀椀渀搀漀眀猀 一吀  䐀爀椀瘀攀爀 唀琀椀氀椀琀椀攀猀㨀 ਀     ⨀  䜀唀䤀 䰀倀一吀唀吀䤀䰀 䴀椀渀椀ⴀ瀀漀爀琀 䐀爀椀瘀攀爀 * Emulex Configuration Tool for Port Driver਀ Please refer to the user manual for details on using these tools.਀ ਀㈀⸀㄀ 䈀䤀伀匀 唀瀀最爀愀搀攀 倀爀漀挀攀搀甀爀攀 眀椀琀栀 䰀倀㘀䐀唀吀䤀䰀 ਀⠀㄀⤀ 䤀渀猀琀愀氀氀 琀栀攀 䄀搀愀瀀琀攀爀 琀漀 戀攀 甀瀀最爀愀搀攀搀 椀渀琀漀 愀 䐀伀匀 倀䌀䤀 猀礀猀琀攀洀 ⠀猀攀攀 䠀愀爀搀眀愀爀攀  Compatibility for a recommended configuration).਀ (2) Boot the DOS PCI system.਀ (3) Run LP6DUTIL revision 8.0 or greater (found on the released diskette, ਀    䌀䐀ⴀ刀伀䴀Ⰰ 漀爀 䘀吀倀 猀攀爀瘀攀爀⤀ ਀⠀㐀⤀ 䘀爀漀洀 琀栀攀 䴀愀椀渀 䴀攀渀甀Ⰰ 匀攀氀攀挀琀 伀瀀琀椀漀渀 㔀 ⠀䴀愀椀渀琀攀渀愀渀挀攀⤀ Ensure that the diagnostic utility identifies itself as revision 8.0 or ਀    最爀攀愀琀攀爀 戀攀昀漀爀攀 挀漀渀琀椀渀甀椀渀最⸀ ਀⠀㔀⤀ 䘀爀漀洀 琀栀攀 䴀愀椀渀琀攀渀愀渀挀攀 䴀攀渀甀Ⰰ 匀攀氀攀挀琀 伀瀀琀椀漀渀 ㄀ ⠀唀瀀搀愀琀攀 䘀椀爀洀眀愀爀攀⤀ The program will prompt for the file name to download. Specify the drive and ਀    瀀愀琀栀 眀栀攀爀攀 砀䈀砀砀砀砀⸀倀刀䜀 挀愀渀 戀攀 昀漀甀渀搀⸀  ਀吀栀椀猀 椀洀愀最攀 昀椀氀攀 椀猀 搀漀眀渀氀漀愀搀攀搀 椀渀琀漀 琀栀攀 砀䈀砀砀砀砀✀猀 䘀䰀䄀匀䠀⸀  吀栀攀 漀瀀攀爀愀琀椀漀渀 猀栀漀甀氀搀  take less than 2 minutes to complete.਀ NOTE: The update operation must not be interrupted or the FLASH may become ਀     挀漀爀爀甀瀀琀攀搀⸀ 䤀昀 琀栀椀猀 漀挀挀甀爀猀Ⰰ 琀栀攀 䄀搀愀瀀琀攀爀 洀甀猀琀 戀攀 爀攀琀甀爀渀攀搀 琀漀 䔀洀甀氀攀砀 昀漀爀 䘀䰀䄀匀䠀   update. This condition can be identified by POST failure, usually when no ਀     䰀䔀䐀猀 琀甀爀渀 漀渀⸀ ਀⠀㘀⤀ 吀栀攀 䄀搀愀瀀琀攀爀 洀甀猀琀 戀攀 爀攀ⴀ椀渀椀琀椀愀氀椀稀攀搀 琀漀 猀琀愀爀琀 甀猀椀渀最 琀栀攀 甀瀀最爀愀搀攀搀 䈀䤀伀匀⸀   Perform a Hard Reset to the system or recycle the power.਀     NOTE: Each newly installed Host Adapter must have BIOS activated using the ਀     䐀伀匀 甀琀椀氀椀琀礀 ⠀氀瀀㘀搀甀琀椀氀⤀⸀ 唀渀琀椀氀 䈀漀漀琀 䈀䤀伀匀 椀猀 攀渀愀戀氀攀搀 甀猀椀渀最 琀栀攀 䐀伀匀 甀琀椀氀椀琀礀Ⰰ you will not see the Boot BIOS message during boot. Once Boot BIOS is ਀     愀挀琀椀瘀愀琀攀搀Ⰰ 愀 洀攀猀猀愀最攀 眀椀氀氀 愀瀀瀀攀愀爀 搀甀爀椀渀最 琀栀攀 戀漀漀琀 猀攀焀甀攀渀挀攀 愀猀欀椀渀最 礀漀甀 press the key for Boot BIOS or the key to skip Boot BIOS.਀ ਀䈀䤀伀匀 眀愀猀 愀氀爀攀愀搀礀 愀挀琀椀瘀愀琀攀搀 椀昀 椀琀 眀愀猀 搀漀眀渀氀漀愀搀攀搀 愀猀 瀀攀爀昀漀爀洀攀搀 愀猀 琀栀攀 愀戀漀瘀攀⸀ ਀吀漀 䄀挀琀椀瘀愀琀攀 䈀漀漀琀䈀椀漀猀㨀   ਀㸀䘀爀漀洀 琀栀攀 氀瀀㘀搀甀琀椀氀 䴀愀椀渀 洀攀渀甀Ⰰ ਀   ㄀⸀ 吀礀瀀攀 㰀㔀㸀 愀渀搀 瀀爀攀猀猀 㰀䔀渀琀攀爀㸀 琀漀 漀瀀攀渀 琀栀攀 䴀愀椀渀琀攀渀愀渀挀攀 洀攀渀甀⸀  2. Type <3> and press to enable Boot BIOS. ਀   ㌀⸀ 吀礀瀀攀 㰀　㸀 愀渀搀 瀀爀攀猀猀 㰀䔀渀琀攀爀㸀 琀漀 爀攀琀甀爀渀 琀漀 琀栀攀 瀀爀攀瘀椀漀甀猀 洀攀渀甀⸀  4. Type <7> and press to exit the lp6dutil program. ਀ ਀ ਀㌀⸀ 䈀䤀伀匀 䰀椀洀椀琀愀琀椀漀渀猀 愀渀搀 䐀攀昀愀甀氀琀 䌀漀渀昀椀最甀爀愀琀椀漀渀 ਀ 3.1 Limitations and Features਀ Below is a list of the current preliminary LightPulse BIOS limitations and ਀昀攀愀琀甀爀攀猀⸀ ਀⨀  䤀渀 漀爀搀攀爀 琀漀 眀漀爀欀 瀀爀漀瀀攀爀氀礀Ⰰ 琀栀椀猀 瘀攀爀猀椀漀渀 漀昀 䈀䤀伀匀 栀愀猀 琀漀 眀漀爀欀 眀椀琀栀 䘀椀爀洀眀愀爀攀  2.22 or above for LP6000 and LP7000, firmware 1.01 for LP850 and firmware ਀   ㈀⸀㠀㄀ 漀爀 愀戀漀瘀攀 昀漀爀 䰀倀㠀　　　⸀ ਀⨀  䤀昀 琀栀攀爀攀 愀爀攀 愀渀礀 栀愀爀搀眀愀爀攀 挀栀愀渀最攀猀 猀甀挀栀 愀猀 爀攀瀀氀愀挀椀渀最 搀爀椀瘀攀猀 漀爀 爀攀ⴀ挀漀渀昀椀最甀爀椀渀最 a Fabric switch environment, make sure to re-configure BIOS using the BIOS ਀   唀琀椀氀椀琀礀⸀ ਀⨀  䤀昀 琀栀攀 洀攀猀猀愀最攀 ∀刀攀琀爀礀 琀栀椀猀 愀搀愀瀀琀攀爀℀℀∀ 眀愀猀 搀椀猀瀀氀愀礀 搀甀爀椀渀最 琀栀攀 䈀䤀伀匀 猀挀愀渀渀椀渀最Ⰰ  please check the hardware configuration or re-configure BIOS using the BIOS ਀   唀琀椀氀椀琀礀⸀ ਀⨀  䤀琀 眀椀氀氀 愀氀氀漀眀 愀渀礀 渀甀洀戀攀爀 漀昀 䰀椀最栀琀倀甀氀猀攀 愀搀愀瀀琀攀爀猀 椀渀 愀 猀礀猀琀攀洀⸀ 䤀琀 挀愀渀 戀攀 any combination of LP7000, 8000, 9002, 9802, 850, 952, and 982. However, ਀   漀渀氀礀 琀栀攀 昀椀爀猀琀 攀椀最栀琀 愀搀愀瀀琀攀爀猀 挀愀渀 戀攀 挀漀渀昀椀最甀爀攀搀 愀猀 琀栀攀 戀漀漀琀 愀搀愀瀀琀攀爀猀㬀 愀渀礀 adapter after the eighth adapter will not be visible during the boot process.਀ * Press to enter the Emulex BIOS Utility.਀ * If a system does not have Multi-boot (BBS), the Boot disk (drive C:) ਀   椀猀 搀攀琀攀爀洀椀渀攀搀 戀礀 琀栀攀 昀椀爀猀琀 挀漀渀昀椀最甀爀攀搀 戀漀漀琀 攀渀琀爀礀 ⠀倀爀椀洀愀爀礀 戀漀漀琀 攀渀琀爀礀⤀⸀ It can be on the first adapter or the second adapter. If a user want to ਀   挀漀渀昀椀最甀爀攀搀 漀渀 琀栀攀 猀攀挀漀渀搀 愀搀愀瀀琀攀爀Ⰰ 搀漀 渀漀琀 挀漀渀昀椀最甀爀攀 愀渀礀 戀漀漀琀 攀渀琀爀礀 漀渀  the first adapter.਀ Example 1:਀ Adapter 1: boot_entry0, boot_entry1.਀   䄀搀愀瀀琀攀爀 ㈀㨀 戀漀漀琀开攀渀琀爀礀㈀Ⰰ 戀漀漀琀开攀渀琀爀礀㌀⸀ ਀   䐀爀椀瘀攀 䌀㨀 戀漀漀琀开攀渀琀爀礀　 ਀   䔀砀愀洀瀀氀攀 ㈀㨀 ਀   䄀搀愀瀀琀攀爀 ㄀㨀  Adapter 2: boot_entry2, boot_entry3.਀    Drive C: boot_entry2਀ ਀⨀  䤀昀 愀 猀礀猀琀攀洀 猀甀瀀瀀漀爀琀猀 䴀甀氀琀椀ⴀ戀漀漀琀 ⠀䈀䈀匀⤀Ⰰ 琀栀攀 䈀漀漀琀 搀椀猀欀 ⠀搀爀椀瘀攀 䌀㨀⤀ 眀椀氀氀 戀攀 the first entry in Multi-boot on system BIOS setup Menu. The list of ਀   攀渀琀爀礀Ⰰ 琀栀愀琀 愀爀攀 攀砀瀀漀爀琀 琀漀 䴀甀氀琀椀ⴀ戀漀漀琀 洀攀渀甀Ⰰ 愀爀攀 搀攀琀攀爀洀椀渀攀 戀礀 琀栀攀 氀椀猀琀 of configured boot entry in the BIOS utility. For example:਀ Adapter 1: boot_entry0, boot_entry1.਀   䄀搀愀瀀琀攀爀 ㈀㨀 戀漀漀琀开攀渀琀爀礀㈀Ⰰ 戀漀漀琀开攀渀琀爀礀㌀⸀ ਀   吀栀攀 漀爀搀攀爀 漀昀 戀漀漀琀 攀渀琀爀礀 琀栀愀琀 愀爀攀 攀砀瀀漀爀琀攀搀 琀漀 琀栀攀 䴀甀氀琀椀ⴀ䈀漀漀琀 ⠀䈀䈀匀⤀ 愀爀攀㨀 boot_entry0, boot_entry1, boot_entry2 and boot_entry3. However, Multi-਀   戀漀漀琀 挀愀渀 漀瘀攀爀眀爀椀琀攀 琀栀椀猀 漀爀搀攀爀 戀礀㨀 戀漀漀琀开攀渀琀爀礀㈀Ⰰ 戀漀漀琀开攀渀琀爀礀　Ⰰ 戀漀漀琀开攀渀琀爀礀㄀ and boot_entry3. In this case, Drive C: is boot_entry2.਀ ਀ * A maximum of 256 LUNs is supported (LUN 0 through 255) per target id ਀   ⠀䐀开䤀䐀 漀爀 䄀䰀倀䄀⤀⸀ 吀栀攀猀攀 ㈀㔀㘀 䰀唀一猀 挀愀渀 戀攀 猀挀愀渀渀攀搀 椀渀 搀椀昀昀攀爀攀渀琀 猀琀愀最攀猀 甀猀椀渀最 琀栀攀 BIOS Utility. However, only 8 entries can be seen during BIOS initialization.਀ * For FC-AL, the adapter's ALPA, PCI bus number and PCI device number can be ਀   瘀椀攀眀攀搀 漀渀 琀栀攀 眀攀氀挀漀洀攀 猀挀爀攀攀渀 漀爀 椀渀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀 洀攀渀甀⸀ 䤀渀 琀栀椀猀 眀愀礀Ⰰ  the user can know exactly which adapter is in which PCI slot in the system.਀ * For Fabric Point to Point or Public Loop, the S_ID (source id), PCI bus਀   渀甀洀戀攀爀 愀渀搀 倀䌀䤀 搀攀瘀椀挀攀 渀甀洀戀攀爀 眀椀氀氀 戀攀 瀀爀椀渀琀攀搀 漀渀 琀栀攀 猀挀爀攀攀渀⸀  ਀⨀  伀渀 䘀愀戀爀椀挀 攀渀瘀椀爀漀渀洀攀渀琀Ⰰ 琀栀攀 洀愀砀椀洀甀洀 渀甀洀戀攀爀 漀昀 搀攀瘀椀挀攀猀 ⠀䐀开䤀䐀⤀ 椀猀 㤀　 眀栀攀渀  configuring boot device in BIOS Utility.਀ * On Private Loop, the maximum number of devices (ALPA) is 99 when ਀   挀漀渀昀椀最甀爀椀渀最 戀漀漀琀 搀攀瘀椀挀攀 椀渀 䈀䤀伀匀 唀琀椀氀椀琀礀⸀ ਀ ਀㌀⸀㈀  䐀攀昀愀甀氀琀 䌀漀渀昀椀最甀爀愀琀椀漀渀 ਀⨀  吀漀 爀攀猀攀琀 琀栀攀 猀攀氀攀挀琀攀搀 愀搀愀瀀琀攀爀 琀漀 椀琀猀 搀攀昀愀甀氀琀猀Ⰰ 瀀爀攀猀猀 㰀搀㸀 椀渀 琀栀攀 倀愀爀愀洀攀琀攀爀  menu. ਀ * Boot BIOS is disabled by default. In order to use Emulex Boot BIOS, user ਀   洀甀猀琀 瀀爀攀猀猀 㰀䄀氀琀 䔀㸀 琀漀 攀渀琀攀爀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀 琀漀 攀渀愀戀氀攀 戀漀漀琀 䈀䤀伀匀⸀ ਀⨀  䤀渀 ∀䌀漀渀昀椀最甀爀攀 䈀漀漀琀 䐀攀瘀椀挀攀猀∀ 漀瀀琀椀漀渀Ⰰ 䰀漀漀瀀 椀猀 琀栀攀 搀攀昀愀甀氀琀 洀漀搀攀⸀ 䈀䤀伀匀 眀椀氀氀  look for a Public Loop first,. If a Public Loop is not detected, it will਀   氀漀漀欀 昀漀爀 愀 倀爀椀瘀愀琀攀 䰀漀漀瀀⸀ ਀⨀  䘀漀爀 ∀䌀漀渀昀椀最甀爀攀 䈀漀漀琀 䐀攀瘀椀挀攀猀∀ 漀瀀琀椀漀渀Ⰰ 琀栀攀 攀椀最栀琀 戀漀漀琀 攀渀琀爀椀攀猀 眀椀氀氀 戀攀 稀攀爀漀  by default ( key).਀ * For FC-AL, each host adapter has a default ALPA of 00 (Hex). ਀⨀  䤀昀 洀漀爀攀 琀栀愀渀 漀渀攀 愀搀愀瀀琀攀爀 椀猀 椀渀 琀栀攀 猀礀猀琀攀洀 眀椀琀栀 琀栀攀 猀愀洀攀 倀䌀䤀 戀甀猀 渀甀洀戀攀爀Ⰰ 愀渀搀  each has a Boot drive attached, the first PCI-scan adapter will be the BOOT ਀   愀搀愀瀀琀攀爀⸀  吀栀攀 昀椀爀猀琀 愀搀愀瀀琀攀爀 椀猀 甀猀甀愀氀氀礀 琀栀攀 氀漀眀攀猀琀 倀䌀䤀 猀氀漀琀 椀渀 琀栀攀 猀礀猀琀攀洀⸀   This information can be viewed from the BIOS Utility.਀ * Default PLOGI Retry Timer is 0 (no retry), it can be changed to 50, 100, ਀   愀渀搀 ㈀　　 洀椀氀氀椀ⴀ猀攀挀⸀ ਀⨀  匀瀀椀渀甀瀀 搀攀氀愀礀 椀猀 搀椀猀愀戀氀攀搀 戀礀 搀攀昀愀甀氀琀⸀ ਀⨀  䄀甀琀漀 匀挀愀渀 椀猀 搀椀猀愀戀氀攀搀 戀礀 搀攀昀愀甀氀琀⸀ ਀⨀  䄀氀氀 琀栀攀 愀戀漀瘀攀 搀攀昀愀甀氀琀 猀攀琀琀椀渀最猀 挀愀渀 戀攀 挀栀愀渀最攀搀 椀渀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀⸀ 䄀氀氀  adapters or BOOT drives can be configured to different ALPAs other than ਀   琀栀攀椀爀 搀攀昀愀甀氀琀 瘀愀氀甀攀猀⸀ ਀ * EDD 3.0 was disabled in default. This is because current Win2K does not ਀   猀甀瀀瀀漀爀琀 䔀䐀䐀 ㌀⸀　 愀渀搀 椀琀 挀漀甀氀搀 栀愀渀最 搀甀爀椀渀最 琀栀攀 圀椀渀㈀䬀 椀渀猀琀愀氀氀愀琀椀漀渀 漀渀 爀攀最甀氀愀爀  Pentium series systems.਀ ਀⨀  䔀渀瘀椀爀漀渀洀攀渀琀愀氀 瘀愀爀椀愀戀氀攀 椀猀 搀椀猀愀戀氀攀搀 椀渀 搀攀昀愀甀氀琀⸀ ਀⨀  匀琀愀爀琀 唀渀椀琀 挀漀洀洀愀渀搀 椀猀 搀椀猀愀戀氀攀搀 椀渀 搀攀昀愀甀氀琀⸀ ਀ ਀㐀⸀ 䈀䤀伀匀 唀琀椀氀椀琀礀 ਀唀猀攀爀 挀愀渀 瀀爀攀猀猀 㰀䄀氀琀 䔀㸀 琀漀 攀渀琀攀爀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀⸀  䔀愀挀栀 洀攀渀甀 椀猀 搀攀猀挀爀椀戀攀搀 戀攀氀漀眀⸀ ਀ 4.1 Main Menu਀ This menu lists all the adapters in the system and the BIOS version number. ਀唀猀攀爀 挀愀渀 攀渀琀攀爀 琀栀攀 渀甀洀戀攀爀 琀漀 猀攀氀攀挀琀 琀栀攀 瀀愀爀琀椀挀甀氀愀爀 愀搀愀瀀琀攀爀⸀ ਀ 4.2 Adapter Menu਀ * The adapter is displayed by ALPA for FC-AL, PCI bus number and device number.਀ * The top screen also displays I/O base address, on board firmware version, ਀   瀀漀爀琀 渀愀洀攀 愀渀搀 渀漀搀攀 渀愀洀攀⸀ ਀⨀  㰀砀㸀 椀猀 琀栀攀 漀渀氀礀 眀愀礀 琀漀 攀砀椀琀 琀栀攀 䈀䤀伀匀 唀琀椀氀椀琀礀 愀渀搀 爀攀戀漀漀琀 琀栀攀 猀礀猀琀攀洀⸀ ਀⨀  㰀搀㸀 椀猀 甀猀攀搀 琀漀 爀攀猀攀琀 琀栀攀 猀攀氀攀挀琀攀搀 愀搀愀瀀琀攀爀 琀漀 搀攀昀愀甀氀琀 瘀愀氀甀攀 眀栀椀氀攀 椀渀  the BIOS Utility.਀ ਀㐀⸀㈀⸀㄀ 䌀漀渀昀椀最甀爀攀 䈀漀漀琀 䐀攀瘀椀挀攀猀 ਀䘀愀椀氀 漀瘀攀爀 戀漀漀琀椀渀最㨀 椀琀 椀猀 愀氀眀愀礀猀 琀栀攀爀攀 猀椀渀挀攀 䈀䤀伀匀 瘀攀爀猀椀漀渀 ㄀⸀㈀　⸀ 吀栀攀爀攀 愀爀攀  eight boot entries that can be configured. If first boot entry failed for ਀眀栀愀琀攀瘀攀爀 栀愀爀搀眀愀爀攀 爀攀愀猀漀渀Ⰰ 椀琀 猀琀椀氀氀 戀攀 愀戀氀攀 琀漀 戀漀漀琀 昀爀漀洀 琀栀攀 猀攀挀漀渀搀 挀漀渀昀椀最甀爀攀搀  boot entry and so on.਀ Currently, this menu supports FC-AL: Private Loop and Public Loop, and Fabric ਀倀漀椀渀琀 琀漀 瀀漀椀渀琀⸀ 䤀昀 琀栀椀猀 戀漀愀爀搀 椀猀 挀漀渀昀椀最甀爀攀搀 愀猀 䘀䌀ⴀ䄀䰀Ⰰ 椀琀 眀椀氀氀 搀漀 瀀甀戀氀椀挀 氀漀漀瀀  first, if it failed, it will perform private loop.਀ This Configure Boot Devices will take care Fabric, Public loop and Private ਀氀漀漀瀀⸀ 伀渀 倀爀椀瘀愀琀攀 氀漀漀瀀Ⰰ 椀琀 挀愀渀 戀漀漀琀 昀爀漀洀 攀椀琀栀攀爀 圀圀倀一 漀爀 䄀䰀倀䄀⸀ 伀渀 䘀愀戀爀椀挀Ⰰ 椀琀  can boot from either WWPN or DID.਀ The first entry is the primary boot entry, please fill in this entry ਀戀攀昀漀爀攀 昀椀氀氀椀渀最 椀渀 琀栀攀 爀攀猀琀 漀昀 琀栀攀 攀渀琀爀椀攀猀⸀ ਀ * It has 8 boot entries with the first one as the primary boot entry. ਀ * If user selects any entry, another menu will be displayed:਀ 00. Clear selected boot entry!! This is used to clear the selected boot਀   攀渀琀爀礀⸀ ਀   　㄀⸀ 䐀䤀䐀 漀爀 䄀䰀倀䄀Ⰰ 圀圀倀一 愀渀搀 搀椀猀欀 椀渀昀漀爀洀愀琀椀漀渀⸀ 吀栀攀 䰀唀一 眀椀氀氀 猀琀漀瀀 漀渀 琀栀攀 昀椀爀猀琀 LUN found in this particular target device.਀ 02. same as 01 with different target device.਀ * If user selects any two-digit number such as 01, then a Pop up menu will be਀   猀栀漀眀渀⸀ 倀氀攀愀猀攀 攀渀琀攀爀 琀栀攀 昀椀爀猀琀 琀眀漀 搀椀最椀琀猀 漀昀 琀栀攀 䰀唀一 琀漀 戀攀  猀挀愀渀渀攀搀 昀漀爀⸀ ਀⨀  䄀 氀椀猀琀 漀昀 琀漀琀愀氀 ㄀㘀 䰀唀一 猀琀愀爀琀椀渀最 眀椀琀栀 䰀唀一 琀栀愀琀 眀愀猀 攀渀琀攀爀 愀戀漀瘀攀 瀀愀爀愀最爀愀瀀栀⸀ In front of each entry, B#D or B#W specifies Boot entry number with boot ਀   瘀椀愀 䐀䤀䐀 漀爀 圀圀倀一⸀ 䘀漀爀 攀砀愀洀瀀氀攀Ⰰ 䈀㄀䐀 洀攀愀渀猀 䈀漀漀琀 攀渀琀爀礀 渀甀洀戀攀爀 漀渀攀 眀椀氀氀 戀漀漀琀 瘀椀愀  DID. B2W means Boot entry number two will boot via WWPN.਀ * Enter the two digit LUN, ਀ * If any two-digit number is entered, another Pop up menu will be shown. ਀ 1. Boot this device via WWPN਀        ㈀⸀ 䈀漀漀琀 琀栀椀猀 搀攀瘀椀挀攀 瘀椀愀 䐀䤀䐀 ਀⨀  䤀昀 愀 甀猀攀爀 猀攀氀攀挀琀猀 ㄀⸀ 吀栀攀 圀圀倀一 漀昀 琀栀攀 攀愀爀氀椀攀爀 猀攀氀攀挀琀攀搀 攀渀琀爀礀 眀椀氀氀 戀攀 猀愀瘀攀搀  in the Flash. However, during initial BIOS scan, it will issue a Name Server ਀   䤀渀焀甀椀爀礀 䜀䤀䐀开倀一 ⠀䜀攀琀 倀漀爀琀 䤀搀攀渀琀椀昀椀攀爀⤀㬀 琀栀攀渀Ⰰ 戀愀猀攀搀 漀渀 琀栀椀猀 䐀䤀䐀Ⰰ 搀漀 琀栀攀 爀攀猀琀  of the scanning.਀ * If a user selects2. The DID of the earlier selected entry will be saved ਀   椀渀 琀栀攀 䘀氀愀猀栀⸀ ਀ ਀㐀⸀㈀⸀㈀ 䌀漀渀昀椀最甀爀攀 吀栀椀猀 䄀搀愀瀀琀攀爀✀猀 倀愀爀愀洀攀琀攀爀猀 ਀吀栀椀猀 漀瀀琀椀漀渀 椀猀 甀猀攀搀 琀漀 挀漀渀昀椀最甀爀攀 瀀愀爀愀洀攀琀攀爀猀 昀漀爀 琀栀椀猀 愀搀愀瀀琀攀爀⸀ ਀ 4.2.2.1 Enable or disable BIOS on this adapter਀ This option is used to Enable or Disable Boot BIOS on an individual adapter ਀戀愀猀椀猀⸀ 吀栀攀 搀攀昀愀甀氀琀 椀猀 搀椀猀愀戀氀攀搀⸀ ਀ 4.2.2.2 Change default ALPA of this adapter਀ This applies only to FC-AL. This option can be used to change the ALPA of the ਀愀搀愀瀀琀攀爀⸀ 吀栀攀 搀攀昀愀甀氀琀 瘀愀氀甀攀 漀昀 琀栀攀 䄀䰀倀䄀 昀漀爀 琀栀攀 愀搀愀瀀琀攀爀 䈀䤀伀匀 椀猀 　　 椀渀 䠀攀砀⸀ 䤀昀    a user changes the Host ALPA to a different value, it will not show on the NVRAM ਀䄀䰀倀䄀 甀渀琀椀氀 琀栀攀 猀礀猀琀攀洀 栀愀猀 戀攀攀渀 爀攀猀攀琀⸀ ਀ 4.2.2.3 Change PLOGI Retry Timer਀ This option is used to set the interval time for the PLOGI Retry Timer. This ਀漀瀀琀椀漀渀 椀猀 攀猀瀀攀挀椀愀氀氀礀 甀猀攀昀甀氀 昀漀爀 吀愀挀栀礀漀渀ⴀ戀愀猀攀搀 刀䄀䤀䐀 愀爀爀愀礀猀⸀  唀渀搀攀爀 瘀攀爀礀 爀愀爀攀  occasion, a Tachyon-based RAID array will reset itself and the port will be ਀琀攀洀瀀漀爀愀爀椀氀礀 漀昀昀 氀椀渀攀 椀渀 琀栀攀 氀漀漀瀀⸀  圀栀攀渀 琀栀攀 瀀漀爀琀 挀漀洀攀猀 琀漀 氀椀昀攀Ⰰ 琀栀攀 倀䰀伀䜀䤀  retry interval helps to discover this device. ਀ The resolutions are 0 (no retry), 50, 100 and 200 msec. The time it takes ਀昀漀爀 漀渀攀 倀䰀伀䜀䤀 琀漀 猀挀愀渀 琀栀攀 眀栀漀氀攀 氀漀漀瀀 ⠀椀昀 ㄀㈀㘀 䄀䰀倀䄀 愀爀攀 漀渀 琀栀攀 氀漀漀瀀⤀ 椀猀 猀栀漀眀渀  below:਀ 50 msec will take 5 to 6 seconds.਀          ㄀　　 洀猀攀挀 眀椀氀氀 琀愀欀攀 ㄀㈀ 猀攀挀漀渀搀猀⸀ 200 msec will take 22 seconds.਀ ਀㐀⸀㈀⸀㈀⸀㐀 吀漀瀀漀氀漀最礀 匀攀氀攀挀琀椀漀渀 ਀吀栀椀猀 洀攀渀甀 椀猀 甀猀攀搀 琀漀 挀栀漀漀猀攀 琀栀攀 吀漀瀀漀氀漀最礀㨀 ਀  ⠀㄀⤀ 䄀甀琀漀 吀漀瀀漀氀漀最礀 ⠀䐀攀昀愀甀氀琀⤀㨀 䰀漀漀瀀 昀椀爀猀琀Ⰰ 椀昀 椀琀 昀愀椀氀猀Ⰰ 椀琀 眀椀氀氀 琀爀礀 䘀愀戀爀椀挀 瀀漀椀渀琀 琀漀 point.਀  ⠀㈀⤀ 䄀甀琀漀 吀漀瀀漀氀漀最礀㨀 䘀愀戀爀椀挀 瀀漀椀渀琀 琀漀 瀀漀椀渀琀 昀椀爀猀琀Ⰰ 椀昀 椀琀 昀愀椀氀猀Ⰰ 椀琀 眀椀氀氀 琀爀礀 䰀漀漀瀀⸀ (3) FC-AL (Loop) only਀  ⠀㐀⤀ 䘀愀戀爀椀挀 瀀漀椀渀琀 琀漀 瀀漀椀渀琀 漀渀氀礀 ਀ 4.2.2.5 Enable or Disable Spinup delay ਀ The default is disabled਀ When the spinup delay was enable, it'll search for the first available boot device,਀椀昀 琀栀攀爀攀 椀猀 戀漀漀琀 搀攀瘀椀挀攀 瀀爀攀猀攀渀琀Ⰰ 戀漀漀琀 椀洀洀攀搀椀愀琀攀氀礀⸀  伀琀栀攀爀眀椀猀攀Ⰰ 椀昀 琀栀攀 戀漀漀琀 搀攀瘀椀挀攀  is not ready, then wait for spin-up delay and keep searching for the bootable device ਀昀漀爀 ㌀ 洀椀渀甀琀攀猀 琀椀洀攀 瀀攀爀椀漀搀⸀ 䤀昀 琀栀攀 䈀䤀伀匀 搀漀攀猀渀✀琀 昀椀渀攀 琀栀攀 搀攀瘀椀挀攀 眀椀琀栀椀渀 琀栀爀攀攀 洀椀渀甀琀攀猀Ⰰ then it will continue booting scanning algorithm, and hopefully another multi-boot਀搀攀瘀椀挀攀 椀猀 愀瘀愀椀氀愀戀氀攀⸀ ਀䤀昀 渀漀 戀漀漀琀 搀攀瘀椀挀攀猀 栀愀瘀攀 戀攀攀渀 搀攀昀椀渀攀搀Ⰰ 愀渀搀 琀栀攀 䄀甀琀漀 匀挀愀渀 昀氀愀最 漀瀀琀椀漀渀 椀猀 攀渀愀戀氀攀搀 (defaults to disabled), then the BIOS will delay for 5 minutes before scanning ਀昀漀爀 搀攀瘀椀挀攀猀⸀ 䤀渀 琀栀攀 瀀爀椀瘀愀琀攀 氀漀漀瀀 挀愀猀攀Ⰰ 眀攀 眀椀氀氀 愀琀琀攀洀瀀琀 琀漀 戀漀漀琀 昀爀漀洀 琀栀攀 氀漀眀攀猀琀  target AL_PA we find. In the fabric-attached case, we will attempt to boot from ਀琀栀攀 昀椀爀猀琀 琀愀爀最攀琀 昀漀甀渀搀 椀渀 琀栀攀 一愀洀攀匀攀爀瘀攀爀 搀愀琀愀⸀  ਀ ਀㐀⸀㈀⸀㈀⸀㘀  䔀渀愀戀氀攀 漀爀 䐀椀猀愀戀氀攀 䄀甀琀漀 匀挀愀渀 ਀䤀昀 琀栀攀爀攀 椀猀 愀 挀漀渀昀椀最甀爀攀搀 戀漀漀琀 攀渀琀爀礀Ⰰ 愀甀琀漀猀挀愀渀 猀攀琀琀椀渀最 眀漀甀氀搀 渀漀琀 戀攀 愀氀氀漀眀攀搀⸀ It has to be set default first , then the autoscan can be set.਀ The default is disabled. The other options are਀ 2. Any first device਀㌀⸀ 䘀椀爀猀琀 䰀唀一 　 搀攀瘀椀挀攀 4. First NOT LUN 0 device਀ The above options are valid only if none of all the eight boot entries is ਀挀漀渀昀椀最甀爀攀搀⸀ 䤀渀 漀琀栀攀爀 眀漀爀搀猀Ⰰ 琀栀攀 挀漀渀昀椀最甀爀攀搀 戀漀漀琀 攀渀琀爀礀 眀椀氀氀 漀瘀攀爀爀椀搀攀 愀渀礀 愀戀漀瘀攀  option was selected.਀ ਀㐀⸀㈀⸀㈀⸀㘀⸀㄀ 䄀渀礀 昀椀爀猀琀 搀攀瘀椀挀攀 ਀吀栀攀 昀椀爀猀琀 愀搀愀瀀琀攀爀 眀椀氀氀㨀 ਀⨀  䤀猀猀甀攀 愀 一愀洀攀 匀攀爀瘀攀爀 䤀渀焀甀椀爀礀⸀   * The first D_ID from Name Server Inquiry will become the boot device.਀ The adapter will attempt to log in to a Public Loop first. If it fails, it will ਀氀漀最 椀渀 琀漀 愀 倀爀椀瘀愀琀攀 䰀漀漀瀀⸀ 吀栀攀 昀椀爀猀琀 猀甀挀挀攀猀猀昀甀氀 猀挀愀渀 搀攀瘀椀挀攀 眀椀氀氀 戀攀 琀栀攀 戀漀漀琀 搀攀瘀椀挀攀  and only this one device will be exported to the Multi-Boot Menu. ਀ ਀㐀⸀㈀⸀㈀⸀㘀⸀㈀ 䘀椀爀猀琀 䰀唀一 　 搀攀瘀椀挀攀 ਀匀愀洀攀 愀猀 ㌀⸀㈀⸀㈀⸀㘀⸀㄀ 攀砀挀攀瀀琀 愀甀琀漀 猀挀愀渀 琀栀攀 昀椀爀猀琀 䰀唀一 　 愀猀 琀栀攀 戀漀漀琀 搀攀瘀椀挀攀⸀ ਀ 4.2.2.6.3 First NOT LUN 0 device਀ Same as 3.2.2.6.1 except auto scan the first NOT LUN 0 as the boot device.਀ ਀吀栀攀爀攀昀漀爀攀Ⰰ 椀琀 椀猀 猀琀爀漀渀最氀礀 爀攀挀漀洀洀攀渀搀攀搀 琀栀愀琀 礀漀甀 甀猀攀  琀栀攀 ∀䌀漀渀昀椀最甀爀攀 䈀漀漀琀 䐀攀瘀椀挀攀猀∀  option to configure at least one boot entry for Fabric, Public loop or Private ਀氀漀漀瀀 挀漀渀昀椀最甀爀愀琀椀漀渀⸀ ਀ 4.2.2.7 Enable or Disable EDD 3.0਀ EDD 3.0 was disabled by default. This is because current Win2K does not ਀猀甀瀀瀀漀爀琀 䔀䐀䐀 ㌀⸀　 愀渀搀 椀琀 眀漀甀氀搀 栀愀渀最 琀栀攀 猀礀猀琀攀洀 搀甀爀椀渀最 琀栀攀 圀椀渀㈀䬀 椀渀猀琀愀氀氀愀琀椀漀渀⸀ ਀ 4.2.2.8 Enable or Disable Start Unit Command਀ This option was disabled by default. It is used to issue SCSI Start Unit਀挀漀洀洀愀渀搀⸀ 圀栀攀渀 椀琀 椀猀 攀渀愀戀氀攀搀Ⰰ 琀栀攀 甀猀攀爀 栀愀瘀攀 琀漀 欀渀漀眀 琀栀攀 猀瀀攀挀椀昀椀挀 䰀唀一 琀漀 issue the SCSI Start Unit Command. This is because when the user configure਀戀漀漀琀 搀攀瘀椀挀攀Ⰰ ∀䔀渀琀攀爀 琀眀漀 搀椀最椀琀猀 漀昀 猀琀愀爀琀椀渀最 䰀唀一 ⠀栀攀砀⤀㨀∀ 栀愀猀 琀漀 戀攀 琀栀攀 欀渀漀眀渀  specific LUN and it will not display like the regular LUN scanning.਀ ਀㐀⸀㈀⸀㈀⸀㤀 䔀渀愀戀氀攀 漀爀 䐀椀猀愀戀氀攀 䔀渀瘀椀爀漀渀洀攀渀琀 嘀愀爀椀愀戀氀攀 ਀吀栀椀猀 漀瀀琀椀漀渀 眀愀猀 搀椀猀愀戀氀攀搀 戀礀 搀攀昀愀甀氀琀⸀ 䤀琀 椀猀 甀猀攀搀 琀漀 猀攀琀 琀栀攀 戀漀漀琀 挀漀渀琀爀漀氀氀攀爀  order if the system support the Environment Variable.਀ ਀㐀⸀㈀⸀㈀⸀㄀　 䔀渀愀戀氀攀 漀爀 䐀椀猀愀戀氀攀 䄀甀琀漀 䈀漀漀琀 匀攀挀琀漀爀  ਀唀猀攀爀 渀攀攀搀 琀漀 攀渀愀戀氀攀 琀栀椀猀 漀瀀琀椀漀渀Ⰰ 琀栀攀 搀攀昀愀甀氀琀 眀愀猀 搀椀猀愀戀氀攀搀⸀ 䤀琀 椀猀 甀猀攀搀 琀漀  automatic define the boot sector of the target disk in migration boot ਀瀀甀爀瀀漀猀攀⸀  䤀昀 琀栀攀爀攀 椀猀渀✀琀 愀渀礀 瀀愀爀琀椀琀椀漀渀 漀渀 琀栀攀 琀愀爀最攀琀Ⰰ 琀栀攀 搀攀昀愀甀氀琀 戀漀漀琀  sector format is 63 sectors.਀ 4.2.2.11 Link Speed Selectioin਀ User can select the desired link speed in the link speed selection menu, ਀愀渀搀 琀栀攀 渀攀眀 氀椀渀欀 猀瀀攀攀搀 渀漀眀 挀愀渀 猀甀瀀瀀漀爀琀 甀瀀 琀漀 㐀 䜀椀最愀戀愀甀搀Ⰰ 琀栀攀 搀攀昀愀甀氀琀 氀椀渀欀  speed is Auto Select.਀ ਀㔀⸀ 倀爀漀挀攀搀甀爀攀 琀漀 䈀甀椀氀搀 琀栀攀 䈀漀漀琀 䐀椀猀欀 昀爀漀洀 琀栀攀 䰀椀最栀琀倀甀氀猀攀 䄀搀愀瀀琀攀爀 ਀⠀㄀⤀ 匀攀琀 琀栀攀 戀漀漀琀 搀椀猀欀 琀漀 戀攀 琀栀攀 氀漀眀攀猀琀 䄀䰀开倀䄀 椀渀 琀栀攀 氀漀漀瀀 漀爀 甀猀攀 䈀䤀伀匀 唀琀椀氀椀琀礀  to configure the ALPA.਀⠀㈀⤀ 倀爀攀瀀愀爀攀 愀 昀氀漀瀀瀀礀 搀椀猀欀 琀栀愀琀 挀漀渀琀愀椀渀猀 戀漀琀栀 䐀伀匀 䘀䐀䤀匀䬀 愀渀搀 䘀伀刀䴀䄀吀 瀀爀漀最爀愀洀猀⸀ (3) Boot from floppy and use FDISK to create DOS primary partition.਀⠀㐀⤀ 䘀漀爀洀愀琀 琀栀攀 䌀㨀 搀爀椀瘀攀 昀爀漀洀 琀栀攀 昀氀漀瀀瀀礀⸀ (5) Install DOS version 6.00 or above.਀⠀㘀⤀ 䤀渀猀琀愀氀氀 圀椀渀搀漀眀一吀⸀ ਀ ਀ 6. Procedure to Install Windows on the Fibre Channel Disk਀ Make sure the user always gets the latest version of Windows NT Port driver or ਀䴀椀渀椀ⴀ倀漀爀琀 搀爀椀瘀攀爀⸀  ਀⨀  夀漀甀爀 挀漀洀瀀甀琀攀爀✀猀 猀礀猀琀攀洀 䈀䤀伀匀 洀愀礀 爀攀焀甀椀爀攀 琀栀愀琀 愀渀漀琀栀攀爀 挀漀渀琀爀漀氀氀攀爀 琀愀欀攀 precedence over the Emulex adapter during boot. If this occurs, you must਀搀椀猀挀漀渀渀攀挀琀 漀爀 搀椀猀愀戀氀攀 琀栀攀 漀琀栀攀爀 愀搀愀瀀琀攀爀⸀  吀栀椀猀 眀椀氀氀 愀氀氀漀眀 礀漀甀 琀漀 挀漀渀昀椀最甀爀攀  and build your operating system on the drive connected to the Emulex adapter.਀ ਀㘀⸀㄀ 䤀渀猀琀愀氀氀 圀椀渀搀漀眀猀 一吀 㐀⸀　 ਀⠀㄀⤀ 䈀漀漀琀 眀椀琀栀 圀椀渀搀漀眀猀 一吀 㐀⸀　 匀攀琀甀瀀 䴀攀搀椀愀 ⠀匀攀攀 䴀椀挀爀漀猀漀昀琀 䐀漀挀甀洀攀渀琀愀琀椀漀渀 䘀漀爀  Details)਀⠀㈀⤀ 圀栀攀渀 琀栀攀 ∀匀瀀攀挀椀昀礀 愀搀搀椀琀椀漀渀愀氀 猀琀漀爀愀最攀 搀爀椀瘀攀爀∀ 洀攀猀猀愀最攀 椀猀 搀椀猀瀀氀愀礀攀搀Ⰰ 椀渀猀攀爀琀  the Emulex driver diskette.਀⠀㌀⤀ 䘀漀氀氀漀眀 琀栀攀 椀渀猀琀爀甀挀琀椀漀渀 琀漀 挀漀洀瀀氀攀琀攀 琀栀攀 椀渀猀琀愀氀氀愀琀椀漀渀⸀ ਀   6.2 Install Windows 2000਀ (1) Boot with Windows 2000 Setup Media (See Microsoft Documentation For ਀    䐀攀琀愀椀氀猀⤀ (2) Monitor the white bar on the bottom of the screen. ਀⠀㌀⤀ 倀爀攀猀猀 嬀䘀㘀崀 眀椀琀栀椀渀 㔀 猀攀挀漀渀搀猀 眀栀攀渀 琀栀攀 ∀倀爀攀猀猀 䘀㘀 椀昀 礀漀甀 渀攀攀搀 琀漀 椀渀猀琀愀氀氀 愀  third party SCSI or RAID driver" message is displayed. ਀⠀㐀⤀ 圀栀攀渀 琀栀攀 ∀匀攀琀甀瀀 挀漀甀氀搀 渀漀琀 搀攀琀攀爀洀椀渀攀 琀栀攀 琀礀瀀攀 漀昀 漀渀攀 漀爀 洀漀爀攀 洀愀猀猀 猀琀漀爀愀最攀  devices installed in your system, or you have chosen to manually specify an ਀    愀搀愀瀀琀攀爀⸀∀ 洀攀猀猀愀最攀 椀猀 搀椀猀瀀氀愀礀攀搀Ⰰ 椀渀猀攀爀琀 琀栀攀 䔀洀甀氀攀砀 搀爀椀瘀攀爀 搀椀猀欀攀琀琀攀⸀ (5) Follow the remaining instructions to complete the Windows 2000 installation਀ ਀ ਀㜀⸀ 䄀搀瘀愀渀挀攀搀 䈀䤀伀匀 䘀攀愀琀甀爀攀猀 ਀ 7.1 Multi-Boot BIOS (BBS)਀ Multi-boot BIOS is in compliance with BIOS Boot Specification (BBS). The ਀猀礀猀琀攀洀 洀甀猀琀 栀愀瘀攀 洀甀氀琀椀ⴀ戀漀漀琀 猀礀猀琀攀洀 䈀䤀伀匀 椀渀 漀爀搀攀爀 琀漀 琀愀欀攀 愀搀瘀愀渀琀愀最攀 漀昀 琀栀椀猀  feature. Multi-boot BIOS allows a user to select any boot disk in the system ਀䈀䤀伀匀 猀攀琀甀瀀 洀攀渀甀⸀ 吀栀攀 戀漀漀琀 搀椀猀欀 挀愀渀 戀攀 愀 䘀椀戀爀攀 䌀栀愀渀渀攀氀 搀爀椀瘀攀Ⰰ 愀 匀䌀匀䤀 搀爀椀瘀攀Ⰰ 愀渀  IDE drive or a floppy drive. Emulex BIOS will supply the first 16 drives to ਀琀栀攀 猀礀猀琀攀洀 䈀䤀伀匀 洀攀渀甀⸀ 吀栀攀 洀甀氀琀椀ⴀ戀漀漀琀 䈀䤀伀匀 挀愀渀 漀瘀攀爀爀椀搀攀 琀栀攀 䘀椀戀爀攀 䌀栀愀渀渀攀氀  drive that is selected in the BIOS Utility. ਀ For example, the system has only eight Fibre Channel disks. The boot disk has ਀䄀䰀倀䄀 　㈀⸀ 䠀漀眀攀瘀攀爀Ⰰ 琀栀攀 甀猀攀爀 挀愀渀 猀攀氀攀挀琀 䄀䰀倀䄀 ㈀㌀ 椀渀 琀栀攀 猀礀猀琀攀洀 䈀䤀伀匀 猀攀琀甀瀀 洀攀渀甀⸀  The boot device will be Fibre Channel disk with ALPA 23 instead of ALPA 02 ਀琀栀愀琀 椀猀 猀攀琀 椀渀 䈀䤀伀匀 唀琀椀氀椀琀礀⸀ 㘀⸀㈀ 䐀爀椀瘀攀爀 䤀渀椀琀椀愀氀椀稀愀琀椀漀渀 愀昀琀攀爀 䈀䤀伀匀 䈀漀漀琀⸀ ਀ ਀ ਀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀⨀ ਀ ਀䤀䤀䤀⸀ 伀瀀攀渀䈀漀漀琀 ਀ This version of OpenBoot supports FC-AL, Private loop, Public loop, and ਀䘀愀戀爀椀挀 倀漀椀渀琀 琀漀 倀漀椀渀琀⸀  䄀氀猀漀Ⰰ 椀琀 猀甀瀀瀀漀爀琀猀 洀甀氀琀椀ⴀ椀渀椀琀椀愀琀漀爀猀 愀渀搀 洀甀氀琀椀ⴀ䰀唀一猀  (0 through 255).਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一伀吀䔀匀 愀渀搀 䌀䄀唀吀䤀伀一匀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ** Ensure that critical files on local boot disk are backed up਀   愀猀 愀 洀攀愀猀甀爀攀 漀昀 瀀爀漀琀攀挀琀椀漀渀⸀ ਀⠀㄀⤀ 吀栀椀猀 瀀爀漀挀攀搀甀爀攀 愀猀猀甀洀攀猀 琀栀攀爀攀 椀猀 愀氀爀攀愀搀礀 愀 ✀氀漀挀愀氀✀ 戀漀漀琀 搀椀猀欀⸀ ਀⠀㈀⤀ 吀栀攀 猀椀稀攀 漀昀 琀栀攀 椀渀琀攀渀搀攀搀 ⠀琀愀爀最攀琀⤀ 昀椀戀爀攀 挀栀愀渀渀攀氀 搀椀猀欀 猀栀漀甀氀搀  be big enough to hold all the file systems, and swap slice ਀    漀昀 琀栀攀 氀漀挀愀氀 挀甀爀爀攀渀琀 戀漀漀琀 搀椀猀欀⸀  ਀⠀㌀⤀ 䄀猀 琀栀攀爀攀 眀椀氀氀 瀀爀漀戀愀戀氀礀 戀攀 洀漀爀攀 琀栀愀渀 漀渀攀 氀漀最椀挀愀氀 搀椀猀欀 搀爀椀瘀攀 漀渀 the fibre channel adapter it will be necessary to use persistent਀    戀椀渀搀椀渀最 ⠀✀渀愀椀氀椀渀最✀ 愀 猀瀀攀挀椀昀椀挀 猀挀猀椀 椀搀 琀漀 愀 猀瀀攀挀椀昀椀挀 眀眀瀀渀 漀爀 搀椀搀⤀⸀ ਀⠀㐀⤀ 䤀琀 眀椀氀氀 戀攀 渀攀挀攀猀猀愀爀礀 琀漀 挀漀爀爀攀氀愀琀攀 琀栀攀 椀渀琀攀渀搀攀搀 戀漀漀琀 搀椀猀欀 搀椀猀瀀氀愀礀攀搀 by the 'probe-scsi-all' command to the devices displayed by the਀    漀瀀攀爀愀琀椀渀最 猀礀猀琀攀洀⸀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㌀⸀㄀　愀　  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  䄀搀搀攀搀 猀琀愀渀搀愀爀搀 䌀䰀倀 ⠀䌀漀洀洀愀渀搀 䰀椀渀攀 倀爀漀琀漀挀漀氀⤀ 猀甀瀀瀀漀爀琀⸀ ⠀䌀刀㈀㠀㌀㠀㐀⤀ ਀㈀⸀  䄀搀搀攀搀 ∀氀椀渀欀ⴀ猀瀀攀攀搀∀ 挀漀洀洀愀渀搀 琀漀 猀栀漀眀 琀栀攀 氀椀渀欀 猀瀀攀攀搀 漀昀 琀栀攀 挀甀爀爀攀渀琀  HBA device. (CR28385)਀ 3. Changed "set-fdiag-switch" command into the debug mode only. (CR28386)਀ 4. Added "set-post-linkup" command can either bring the linkup and ਀    椀渀椀琀 琀栀攀 䠀䈀䄀 搀甀爀椀渀最 琀栀攀 倀伀匀吀 漀爀 搀漀 琀栀攀 渀漀爀洀愀氀 椀渀椀琀 倀伀匀吀 瀀爀漀挀攀搀甀爀攀Ⰰ the default is FCODE will not bring the link up and init the HBA ਀    搀甀爀椀渀最 琀栀攀 倀伀匀吀⸀ ⠀䌀刀㈀㠀㌀㤀㈀⤀ ਀ ----------------------- NEW CHANGES 3.01a1 ------------------------਀ 1. Some variable in the scsidisk file was create as local variable, and ਀    挀愀甀猀攀 猀礀猀琀攀洀 昀愀椀氀 琀漀 戀漀漀琀 眀椀琀栀 ∀䰀愀猀琀 吀爀愀瀀㨀 䤀氀氀攀最愀氀 䤀渀猀琀爀甀挀琀椀漀渀∀ 攀爀爀漀爀  message. The new fixed by change some variables to external variable ਀    椀渀猀琀攀愀搀 漀昀 氀漀挀愀氀 瘀愀爀椀愀戀氀攀⸀  ⠀䌀刀㈀㜀㔀㤀㠀⤀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㌀⸀　㄀愀　  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  匀甀瀀瀀漀爀琀 㠀䜀戀⼀猀 䠀䈀䄀⸀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㌀⸀　　愀㈀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀ 1. Fixed the issue if the len size of the decode-unit on device path /fp ਀    椀猀 氀愀爀最攀 琀栀愀渀 ㈀ 搀椀最椀琀猀Ⰰ 琀栀攀 搀攀挀漀搀攀ⴀ甀渀椀琀 椀猀 昀愀椀氀猀 琀漀 挀漀渀瘀攀爀琀 琀攀砀琀  unit-string, and cause system is not bootable, and boot command ਀    搀椀猀愀戀氀攀搀⸀ ⠀䌀刀㈀㔀㈀㄀㔀⤀ ਀㈀⸀  䘀椀砀攀搀 琀栀攀 椀猀猀甀攀 漀渀 猀漀洀攀 猀礀猀琀攀洀猀 琀栀攀 瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀 挀漀洀洀愀渀搀 昀愀椀氀猀  if the HBA has no link. (CR25036)਀ 3. In PCI Configuration Register there is a bit to control the HBA ਀    戀甀猀 洀愀猀琀攀爀 挀愀瀀愀戀椀氀椀琀礀 ⠀䈀䴀䔀⤀⸀  䤀渀 搀甀愀氀 挀栀愀渀渀攀氀 䠀䈀䄀 眀栀攀渀 漀渀攀 漀昀 琀栀攀  Bus Master Enable bit is cleared can cause other channel HBA DMA ਀    琀漀 戀攀 猀琀甀挀欀Ⰰ 愀渀搀 挀愀甀猀攀 猀礀猀琀攀洀 栀愀渀最猀 漀爀 昀愀椀氀甀爀攀 搀甀爀椀渀最 琀栀攀 戀漀漀琀  time. This release takes care this issue by set the BME bit on ਀    昀漀爀攀瘀攀爀⸀ ⠀䌀刀㈀㐀㤀㄀㄀⤀⠀䌀刀㈀㔀　　㔀⤀ ਀㐀⸀  䤀昀 琀栀攀爀攀 椀猀 猀漀洀攀 甀渀猀漀氀椀挀椀琀攀搀 昀爀愀洀攀 挀漀洀椀渀最 昀爀漀洀 琀栀攀 猀眀椀琀挀栀 漀爀 猀攀爀瘀椀挀攀  provider, and the Boot code is not configure to response the FC-CT ਀    唀渀猀漀氀椀挀椀琀攀搀Ⰰ 琀栀椀猀 挀愀渀 挀愀甀猀攀 琀栀攀 猀礀猀琀攀洀 栀愀渀最猀 搀甀爀椀渀最 戀漀漀琀 漀爀 猀挀愀渀 琀愀爀最攀琀猀⸀ In order not to sent any FC-CT request, the new release removed the ਀    洀愀椀氀戀漀砀 挀漀渀昀椀最开爀椀渀最 挀漀洀洀愀渀搀⸀ ⠀䌀刀㈀㔀㈀㌀㌀⤀ ਀㔀⸀  䌀栀愀渀最攀搀 琀栀攀 搀椀猀瀀氀愀礀 昀漀爀洀愀琀 漀渀 䘀挀漀搀攀 瘀攀爀猀椀漀渀 渀甀洀戀攀爀 椀渀 ⸀瀀爀漀瀀攀爀琀椀攀猀 猀挀爀攀攀渀 from ASCII to Hex for IBM machine. (CR25617)਀  6. Update the copyright date from .properties command. (CR24936)਀  ਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㌀⸀　　愀㄀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  匀甀瀀瀀漀爀琀 匀䰀䤀ⴀ㈀ 椀洀瀀氀攀洀攀渀琀愀琀椀漀渀⸀ ⠀䌀刀㈀㐀㜀㌀㈀⤀ ਀㈀⸀  一攀眀 椀洀瀀氀攀洀攀渀琀 愀搀搀攀搀 䘀䌀 琀愀瀀攀 戀漀漀琀 猀甀瀀瀀漀爀琀⸀ ⠀䌀刀㈀㐀㜀㌀㌀⤀ ਀㌀⸀  一攀眀 椀洀瀀氀攀洀攀渀琀 愀搀搀攀搀 䘀䌀 㔀㈀　 戀礀琀攀猀 戀氀漀挀欀猀 搀椀猀欀 戀漀漀琀 猀甀瀀瀀漀爀琀⸀ ⠀䌀刀㈀㐀㜀㌀㐀⤀ ਀㐀⸀  䄀搀搀攀搀 洀漀爀攀 挀漀洀瀀愀琀椀戀氀攀 搀攀瘀椀挀攀猀 渀愀洀攀 瀀爀漀瀀攀爀琀礀 漀渀 挀漀洀瀀愀琀椀戀氀攀 昀椀攀氀搀 昀漀爀 倀䌀䤀  and PCIex. (CR24735)਀ 5. In the set-link-speed selection menu, if user selected 4 Gb/s link ਀    猀瀀攀攀搀 漀渀 愀 ㈀ 䜀戀⼀猀 䠀䈀䄀 挀愀渀 挀愀甀猀攀 氀椀渀欀 漀爀 戀漀漀琀 昀愀椀氀甀爀攀Ⰰ 琀栀攀 渀攀眀 昀椀砀攀搀  removed the 4 Gb/s option on set-link-speed selection menu on 2 Gb/s ਀    漀爀 氀漀眀攀爀 䠀䈀䄀猀⸀ 吀栀攀 㐀 䜀戀⼀猀 氀椀渀欀 猀瀀攀攀搀 漀瀀琀椀漀渀 椀猀 漀渀氀礀 愀瘀愀椀氀愀戀氀攀 漀渀 㐀 䜀戀⼀猀  HBA only. (CR24737)਀ 6. In the multipath environment, the second path is failing due to no ਀    爀攀琀爀礀 漀渀 愀 爀攀猀攀爀瘀愀琀椀漀渀 挀漀渀昀氀椀挀琀⸀ 吀栀椀猀 爀攀氀攀愀猀攀 愀搀搀攀搀 爀攀琀爀礀 漀渀 匀䌀匀䤀  Reservation Conflict. (CR24739)਀ ਀ ----------------------- NEW CHANGES 1.50a9 ------------------------਀ 1. In some special array, Fcode in loop mode display incorrect LUNs on ਀    猀栀漀眀ⴀ挀栀椀氀搀爀攀渀 漀爀 瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀 挀漀洀洀愀渀搀⸀  吀栀攀 渀攀眀 昀椀砀 琀愀欀攀猀 挀愀爀攀 琀栀椀猀  issue by adding the SCSI inquiry command before calling the show-luns਀    挀漀洀洀愀渀搀 椀渀 猀栀漀眀ⴀ挀栀椀氀搀爀攀渀Ⰰ 愀渀搀 猀攀琀 琀栀攀 渀甀洀戀攀爀猀 漀昀 爀攀琀爀礀 漀渀 戀甀猀礀 猀琀愀琀甀猀  to limits of 10 times. (CR20261)਀ 2. If the search eVPD data (V2) is located near at the end of 108 bytes in ਀    琀栀攀 嘀倀䐀 昀椀攀氀搀Ⰰ 琀栀甀猀 猀漀洀攀琀椀洀攀猀 挀愀渀 挀愀甀猀攀 昀愀椀氀猀 琀漀 搀椀猀瀀氀愀礀 琀栀攀 眀栀漀氀攀 猀琀爀椀渀最 of eVPD (V2) data. To fix this display VPD data on V2 field issue, the ਀    渀攀眀 昀椀砀 挀栀愀渀最攀搀 琀栀攀 嘀倀䐀 搀甀洀瀀攀搀 攀渀琀爀礀 椀渀搀攀砀 琀漀 ㈀　⨀渀 戀礀琀攀猀Ⰰ 愀渀搀 挀栀愀渀最攀  the VPD search area to 28 bytes, this can cover the whole maximum length਀    漀昀 㠀　 戀礀琀攀猀 漀渀 嘀㈀ 搀愀琀愀 昀椀攀氀搀⸀ ⠀䌀刀㈀　㈀㘀㈀⤀ ਀㌀⸀  䘀挀漀搀攀 昀愀椀氀猀 琀漀 椀猀猀甀攀 愀 爀攀琀爀礀 挀漀洀洀愀渀搀 眀椀琀栀 愀 挀栀攀挀欀 挀漀渀搀椀琀椀漀渀 椀昀 琀栀攀 猀攀渀猀攀 data returning a response code 71h (deffered errors). The new fix added ਀    猀甀瀀瀀漀爀琀 搀攀昀攀爀爀攀搀 攀爀爀漀爀 ⠀㜀㄀栀 ☀ 㜀㌀栀⤀ 愀渀搀 挀甀爀爀攀渀琀 攀爀爀漀爀 ⠀㜀㈀栀⤀ 漀渀 猀攀渀猀攀 搀愀琀愀  returned to returning check condition status, this will continue apply retry ਀    挀漀洀洀愀渀搀⸀ ⠀䌀刀㈀　㈀㘀㐀⤀ ਀㐀⸀  䤀渀 猀漀洀攀 戀氀愀搀攀 猀攀爀瘀攀爀Ⰰ 愀昀琀攀爀 ∀猀挀愀渀∀Ⰰ 䘀挀漀搀攀 椀猀猀甀攀 愀 ∀甀渀洀愀瀀ⴀ爀攀最猀∀ 愀琀 ∀挀氀漀猀攀∀Ⰰ  then re-open again to "check" the FC device for setting up the FC targets਀    椀渀琀漀 琀栀攀 匀䴀匀 戀漀漀琀 洀攀渀甀Ⰰ 猀漀洀攀栀漀眀 琀栀攀 爀攀ⴀ洀愀瀀椀渀最 䘀䌀 搀攀瘀椀挀攀 椀渀琀漀 琀栀攀  system virtual address spaces function is not working properly, and ਀    挀愀甀猀攀 琀栀攀 猀礀猀琀攀洀 渀漀琀 愀戀氀攀 琀漀 爀攀挀漀最渀椀稀攀 愀渀礀 䘀䌀 搀攀瘀椀挀攀猀 搀甀爀椀渀最 ∀挀栀攀挀欀∀⸀   The new fix removed the "unmap-regs" call at the "close", and system can ਀    挀漀渀琀椀渀甀攀 挀漀洀瀀氀攀琀攀 猀攀琀甀瀀 琀栀攀 䘀䌀 琀愀爀最攀琀猀 椀渀琀漀 琀栀攀 戀漀漀琀 洀攀渀甀Ⰰ 愀渀搀 琀栀椀猀 猀瀀攀挀椀愀氀  condition only apply to some systems only. (CR19585)਀ 5. If the NVRAM data field is empty, there will be a warning message ਀     ∀䌀愀渀渀漀琀 搀甀洀瀀 一嘀刀䄀䴀∀ 搀椀猀瀀氀愀礀 搀甀爀椀渀最 琀栀攀 倀伀匀吀Ⰰ 愀渀搀 琀栀椀猀 洀攀猀猀愀最攀  sometimes can confuse user, but if removed out this warning message, then਀    椀琀 眀椀氀氀 栀愀爀搀 琀漀 搀攀戀甀最 椀渀 愀 爀攀愀氀 挀愀猀攀⸀ 吀栀攀 渀攀眀 昀椀砀 猀攀琀 琀栀椀猀 攀爀爀漀爀 洀攀猀猀愀最攀  display only in the verbose mode, and the warning message wouldn't display਀    搀甀爀椀渀最 琀栀攀 渀漀爀洀愀氀 戀漀漀琀 猀攀猀猀椀漀渀⸀ ⠀䌀刀㈀　㈀㘀㔀⤀ ਀㘀⸀  䄀昀琀攀爀 挀栀愀渀最攀搀 琀栀攀 戀漀漀琀 洀漀搀攀 昀爀漀洀 猀搀ⴀ戀漀漀琀 琀漀 猀昀猀ⴀ戀漀漀琀Ⰰ  琀栀攀 猀昀猀㼀 昀氀愀最 戀椀琀 椀渀  NVRAM is not display correct value, and confuse user. The new release਀    爀攀ⴀ甀瀀搀愀琀攀 琀栀攀 猀昀猀㼀 昀氀愀最 戀椀琀 椀渀 一嘀刀䄀䴀 愀昀琀攀爀 ∀猀攀琀ⴀ猀昀猀ⴀ戀漀漀琀∀ 眀愀猀 挀愀氀氀攀搀⸀ (CR20266)਀ 7. Update the new Emulex Copyright display format. (CR20267)਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㠀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  吀栀攀 倀䌀䤀 搀攀瘀椀挀攀 䤀䐀 昀漀爀 䰀瀀攀㄀㄀　　　 椀渀 洀愀欀攀 昀椀氀攀 眀愀猀渀✀琀 愀 挀漀爀爀攀挀琀 瘀愀氀甀攀Ⰰ  and cause probe process does not find the Fcode image during POST.਀    吀栀攀 渀攀眀 爀攀氀攀愀猀攀 昀椀砀攀搀 琀栀椀猀 椀猀猀甀攀 戀礀 甀瀀搀愀琀攀 琀栀攀 挀漀爀爀攀挀琀 倀䌀䤀 搀攀瘀椀挀攀  ID in make file. (CR18053)਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㜀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀   吀栀攀 挀漀洀洀愀渀搀 漀昀 爀攀瀀漀爀琀ⴀ氀甀渀猀 椀猀 渀漀琀 猀攀琀甀瀀 愀猀 攀砀琀攀爀渀愀氀 瘀愀爀椀愀戀氀攀 椀渀  FCode, this caused the system fail to compile the report-luns into ਀     琀栀攀 刀䄀䴀 搀甀爀椀渀最 琀栀攀 戀漀漀琀 琀椀洀攀Ⰰ 愀渀搀 爀攀猀甀氀琀 愀 戀漀漀琀 昀愀椀氀甀爀攀⸀  吀栀攀 渀攀眀  fix has setup the report-luns as external variable. (CR17926)਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㘀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  䄀搀搀攀搀 琀栀攀 刀攀瀀漀爀琀 䰀唀一 戀攀昀漀爀攀 吀攀猀琀 唀渀椀琀 刀攀愀搀礀 挀漀洀洀愀渀搀⸀ ⠀䌀刀㄀㜀㠀㌀㔀⤀ ਀㈀⸀  䄀搀搀攀搀 㘀　洀猀 搀攀氀愀礀 愀昀琀攀爀 倀刀䰀䤀 愀渀搀 戀攀昀漀爀攀 琀栀攀 昀椀爀猀琀 刀攀瀀漀爀琀 䰀甀渀猀 挀漀洀洀愀渀搀  is sent out. (CR17836)਀ 3. Changed the FCP Port Completion Timeout to 90 seconds for Start/Stop Unit਀    挀漀洀洀愀渀搀Ⰰ 愀渀搀 漀琀栀攀爀猀 昀漀爀 ㌀　 猀攀挀漀渀搀猀 琀椀洀攀漀甀琀⸀ ⠀䌀刀㄀㜀㠀㌀㜀⤀ ਀㐀⸀  䘀椀砀攀搀 琀栀攀 戀甀最 漀渀 猀礀猀琀攀洀 栀愀渀最猀 搀甀爀椀渀最 ∀瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀∀Ⰰ 戀攀挀愀甀猀攀 琀栀攀 琀椀洀攀漀甀琀  for FCP completion was greater FCP Response. The new fix will be increased ਀    䘀䌀倀 刀攀猀瀀漀渀猀攀 吀椀洀攀漀甀琀 琀漀 ㄀　　 猀攀挀漀渀搀猀 昀漀爀 匀琀愀爀琀⼀匀琀漀瀀 唀渀椀琀 挀漀洀洀愀渀搀Ⰰ 愀渀搀 漀琀栀攀爀猀  for 40 seconds timeout. (CR17838)਀ 5. Fixed the bug for mishandle the return value of TUR when FC cable was not਀    挀漀渀渀攀挀琀 瀀爀漀瀀攀爀氀礀 搀甀爀椀渀最 戀漀漀琀 琀椀洀攀 愀渀搀 爀攀猀甀氀琀 愀渀 攀爀爀漀爀 洀攀猀猀愀最攀 漀昀  "STACK UNDERFLOW" issue. (CR17839)਀ 6. Fixed the bug for mishandle the return value of TUR when the first FC target਀    眀愀猀 渀漀琀 愀瘀愀椀氀愀戀氀攀 漀爀 渀漀琀 挀漀渀渀攀挀琀 瀀爀漀瀀攀爀氀礀 搀甀爀椀渀最 琀栀攀 䴀甀氀琀椀ⴀ瀀愀琀栀 䘀愀戀爀椀挀 戀漀漀琀  time and cause system not to continue boot on the 2nd target instead return ਀    眀椀琀栀 愀渀 攀爀爀漀爀 洀攀猀猀愀最攀 漀昀 ∀匀吀䄀䌀䬀 唀一䐀䔀刀䘀䰀伀圀∀ 椀猀猀甀攀⸀ ⠀䌀刀㄀㜀㠀㐀　⤀ ਀㜀⸀  䤀昀 琀栀攀 一嘀刀䄀䴀 渀攀瘀攀爀 戀攀攀渀 椀渀椀琀椀愀氀椀稀攀 戀攀昀漀爀攀Ⰰ 琀栀攀爀攀 眀椀氀氀 戀攀 愀 眀愀爀渀椀渀最 洀攀猀猀愀最攀  "Cannot dump NVRAM" display during the POST, and this message will confuse਀    甀猀攀爀⸀  吀栀攀 渀攀眀 昀椀砀 眀椀氀氀 爀攀洀漀瘀攀 琀栀椀猀 眀愀爀渀椀渀最 洀攀猀猀愀最攀⸀ ⠀䌀刀㄀㜀㠀㐀㄀⤀ ਀㠀⸀  䘀椀砀攀搀 琀栀攀 椀猀猀甀攀 琀漀 挀栀愀渀最攀 琀栀攀 䘀挀漀搀攀 椀猀猀甀攀猀 搀漀甀戀氀攀 倀䰀伀䜀䤀猀 搀漀眀渀 琀漀 漀渀攀 倀䰀伀䜀䤀  in a normal FC boot condition. (CR17842)਀ 9. Re-adjust the string value of eVPD display to fix the segmentation fault issue਀    搀甀爀椀渀最 䐀刀 漀瀀攀爀愀琀椀漀渀 漀渀 猀漀洀攀 猀攀爀瘀攀爀 眀栀椀挀栀 挀愀甀猀椀渀最 䘀挀漀搀攀 渀漀琀 琀漀 戀攀 氀漀愀搀攀搀⸀  (CR17013)਀ 10. There are extra spaces shows on show-children's display format between ਀    䰀唀一 琀漀 䰀唀一⸀ 吀栀攀 渀攀眀 昀椀砀 爀攀洀漀瘀攀 琀栀漀猀攀 攀砀琀爀愀 猀瀀愀挀攀猀 戀攀琀眀攀攀渀 䰀唀一 琀漀 䰀唀一⸀ (CR17843)਀ 11. If user use "cd device-name" command to select the HBA, and try to update ਀    琀栀攀 一嘀刀䄀䴀Ⰰ 琀栀攀渀 猀礀猀琀攀洀 伀䈀倀 眀椀氀氀 椀猀猀甀攀 愀渀 ∀䴀攀洀漀爀礀 䄀搀搀爀攀猀猀 渀漀琀 䄀氀椀最渀攀搀∀  error message, the new fixed will issue a warning message to the user as ਀    ∀䐀攀瘀椀挀攀 椀猀 渀漀琀 伀瀀攀渀搀 ⴀ 甀猀攀 猀攀氀攀挀琀ⴀ搀攀瘀 琀漀 伀瀀攀渀 琀栀攀 䐀攀瘀椀挀攀∀⸀ ⠀䌀刀㄀㜀　　㤀⤀ ਀㄀㈀⸀ 刀攀渀愀洀攀 琀栀攀 ⸀瘀攀爀猀椀漀渀 挀漀洀洀愀渀搀 琀漀 ⸀昀挀漀搀攀 琀漀 搀椀猀瀀氀愀礀 琀栀攀 䘀挀漀搀攀 瘀攀爀猀椀漀渀 渀甀洀戀攀爀⸀ (CR17845)਀ 13. Update this readme document for how to setup the FC Multi-path Fabric boot ਀    洀攀琀栀漀搀⸀ ⠀䌀刀㄀㜀㤀㐀㘀⤀ ਀㄀㐀⸀ 䌀栀愀渀最攀 琀栀攀 攀渀挀漀搀攀 洀攀琀栀漀搀 昀爀漀洀 猀琀爀椀渀最 琀漀 椀渀琀攀最攀爀 漀渀 猀漀洀攀 洀愀挀栀椀渀攀 椀渀 琀栀攀椀爀 .property field to display the proper fcode-version number. (CR17847)਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㔀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  䘀椀砀攀搀 琀栀攀 戀甀最 昀漀爀 匀漀洀攀 猀礀猀琀攀洀 爀攀猀甀氀琀猀 椀渀 瀀愀渀椀挀 搀甀爀椀渀最 攀愀爀氀礀 猀琀愀最攀猀 of boot process. This system had a feature in obp to probe scan all the ਀    漀渀戀漀愀爀搀 搀攀瘀椀挀攀猀 搀甀爀椀渀最 氀漀挀愀氀 戀漀漀琀 琀椀洀攀Ⰰ 愀渀搀 琀栀椀猀 瀀爀漀戀椀渀最 昀攀愀琀甀爀攀 爀攀焀甀椀爀攀猀 a method of decode-unit to converts a text representation of a unit-address ਀    椀渀琀漀 愀 渀甀洀攀爀椀挀愀氀 爀攀瀀爀攀猀攀渀琀愀琀椀漀渀 漀昀 愀 瀀栀礀猀椀挀愀氀 愀搀搀爀攀猀猀 眀椀琀栀椀渀 琀栀攀 愀搀搀爀攀猀猀  space defined by the device node. Once the decode-unit returns unexpected ਀    爀攀猀甀氀琀 搀甀爀椀渀最 戀漀漀琀 琀椀洀攀Ⰰ 琀栀攀渀 椀琀 眀椀氀氀 挀愀甀猀攀 琀栀攀 猀礀猀琀攀洀 瀀愀渀椀挀 眀椀琀栀 琀栀攀 攀爀爀漀爀  message "" module. The new fix will set the proper return value ਀    昀漀爀 琀栀攀 ∀搀攀挀漀搀攀ⴀ甀渀椀琀∀ 搀甀爀椀渀最 戀漀漀琀 琀椀洀攀Ⰰ 愀渀搀 氀攀琀 琀栀攀 猀礀猀琀攀洀 挀漀渀琀椀渀甀攀 琀漀  finish up the probe scan. (CR16557)਀ 2. Removed the 'Target none' display on probe-scsi-all or show-children ਀    挀漀洀洀愀渀搀⸀ ⠀䌀刀㄀㘀㔀㔀㠀⤀ ਀㌀⸀  吀栀攀 瘀愀氀甀攀 漀昀 栀漀猀琀 ∀瀀漀爀琀ⴀ眀眀渀∀ 愀渀搀 ∀渀漀搀攀ⴀ眀眀渀∀ 愀爀攀 洀椀猀猀椀渀最 椀渀 ⸀瀀爀漀瀀攀爀琀椀攀猀  command when user use cd command to select the specified device node. ਀    吀栀攀 渀攀眀 昀椀砀 眀椀氀氀 猀栀漀眀 琀栀攀 栀漀猀琀 ∀瀀漀爀琀ⴀ眀眀渀∀ 愀渀搀 ∀渀漀搀攀ⴀ眀眀渀∀ 瘀愀氀甀攀 椀渀 琀栀攀  reg property when use either "cd" or "dev" command to select the specified ਀    搀攀瘀椀挀攀 渀漀搀攀⸀ ⠀䌀刀㄀㘀㔀㔀㤀⤀ ਀㐀⸀  吀愀欀攀 挀愀爀攀 琀栀攀 渀攀眀 猀攀氀攀挀琀椀瘀攀 爀攀猀攀琀 戀攀栀愀瘀椀漀爀⸀ ⠀䌀刀㄀㘀㔀㘀　⤀ ਀㔀⸀  䤀渀挀爀攀愀猀攀搀 昀挀瀀 琀椀洀攀漀甀琀 昀漀爀 倀漀爀琀 挀漀洀瀀氀攀琀椀漀渀 昀爀漀洀 㐀 猀攀挀漀渀搀猀 琀漀 㘀　 猀攀挀漀渀搀猀⸀ (CR16561) ਀ 6. Re-adjust the # of retry on START/STOP command when the disk is not ਀    猀瀀椀渀渀椀渀最 甀瀀⸀ ⠀䌀刀㄀㘀㔀㘀㈀⤀  ਀㜀⸀  䄀搀搀攀搀 搀攀氀愀礀 漀渀 昀挀瀀 爀攀猀瀀漀渀猀攀 昀漀爀 匀吀䄀刀吀⼀匀吀伀倀 挀漀洀洀愀渀搀⸀ ⠀䌀刀㄀㘀㔀㘀㌀⤀  ਀㠀⸀  䄀搀搀攀搀 吀攀猀琀 唀渀椀琀 刀攀愀搀礀 漀渀 戀攀昀漀爀攀 猀攀渀搀椀渀最 愀 匀琀愀爀琀⼀匀琀漀瀀 挀漀洀洀愀渀搀 琀漀 琀栀攀 琀愀爀最攀琀⸀  If the target is ready, don't send the Start/Stop Unit command. (CR16564)਀ 9. Display wrong "fc-boot-dev-portWWN" and "fc-boot-dev-portID" in reg ਀    瀀爀漀瀀攀爀琀礀 眀栀攀渀 甀猀椀渀最 ∀瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀∀ 椀渀 伀䈀倀⸀ 吀栀攀 渀攀眀 昀椀砀攀搀 爀攀洀漀瘀攀搀  "fc-boot-dev-portWWN" and "fc-boot-dev-portID" in .property when using ਀    ∀瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀∀ 椀渀 瀀爀椀瘀愀琀攀 氀漀漀瀀 洀漀搀攀⸀⠀䌀刀㄀㘀㔀㘀㔀⤀ ਀㄀　⸀ 䌀栀愀渀最攀搀 渀攀眀 挀漀瀀礀爀椀最栀琀 昀爀漀洀 ∀䌀漀瀀礀爀椀最栀琀 ⠀挀⤀ ㈀　　㔀 䔀洀甀氀攀砀 䐀攀猀椀最渀 ☀  Manufacturing Corporation." to "Copyright (c) 2005 Emulex". (CR16566)਀ 11. Added new decode Peripheral Device Type for:਀     　砀　㘀 ⠀匀挀愀渀渀攀爀 䐀攀瘀椀挀攀⤀Ⰰ  0x07 (Optical Device), ਀     　砀　㠀 ⠀䴀攀搀椀甀洀 䌀栀愀渀最攀爀⤀Ⰰ  0x09 (Communications Device), ਀     　砀　挀 ⠀䄀爀爀愀礀 䌀漀渀琀爀漀氀氀攀爀⤀Ⰰ 愀渀搀  0x0d (ESI Device). (CR16567) ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㐀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  䄀搀搀攀搀 琀栀攀 渀攀眀 氀椀渀欀 猀瀀攀攀搀 猀攀氀攀挀琀椀漀渀 昀攀愀琀甀爀攀Ⰰ 甀猀攀爀 挀愀渀 甀猀攀 挀漀洀洀愀渀搀 "set-link-speed" to select the desired link speed, the new link਀    猀瀀攀攀搀 渀漀眀 挀愀渀 猀甀瀀瀀漀爀琀 甀瀀 琀漀 㐀 䜀椀最愀戀愀甀搀Ⰰ 愀渀搀 琀栀攀 搀攀昀愀甀氀琀 氀椀渀欀 猀瀀攀攀搀 is Auto Select. (CR16047)਀ 2. Added the new Fcode Diag Switch feature, user can use command਀    ∀猀攀琀ⴀ昀搀椀愀最ⴀ猀眀椀琀挀栀∀ 琀漀 琀甀爀渀 琀栀攀 搀椀愀最 猀眀椀琀挀栀 漀渀⼀漀昀昀⸀  䤀昀 琀栀攀 䐀椀愀最 switch is on, the detail debug error message will be print out ਀    搀甀爀椀渀最 倀伀匀吀 漀爀 戀漀漀琀 琀椀洀攀 椀昀 琀栀攀爀攀 椀猀 愀渀礀 氀椀渀欀⼀戀漀漀琀 昀愀椀氀甀爀攀⸀⠀䌀刀㄀㘀　㐀㠀⤀ ਀㌀⸀  䈀甀最 昀椀砀攀搀 漀渀 䠀䈀䄀 搀椀搀 渀漀琀 爀攀琀爀礀 甀渀搀攀爀 愀 䰀伀䜀伀 爀攀猀瀀漀渀猀攀 愀渀搀 挀愀甀猀攀  fabric boot failure. (CR15707)਀ 4. Bug fixed on HBA did not retry the START/STOP command on a SCSI ਀    儀甀攀甀攀 䘀甀氀氀 爀攀猀瀀漀渀猀攀 愀渀搀 挀愀甀猀攀 昀愀戀爀椀挀 戀漀漀琀 昀愀椀氀甀爀攀⸀ 吀栀攀 渀攀眀 渀甀洀戀攀爀 of retry for Queue Full is up to 10 times and then give up.(CR16049)਀ 5. Changed the new number of retry condition for SCSI Busy to retry ਀    昀漀爀攀瘀攀爀⸀ ⠀䌀刀㄀㘀　㔀　⤀ ਀㘀⸀  䄀搀搀攀搀 琀栀攀  栀漀猀琀 ∀瀀漀爀琀ⴀ眀眀渀∀ 愀渀搀 ∀渀漀搀攀ⴀ眀眀渀∀ 漀昀 琀栀攀 䠀䈀䄀 椀渀琀漀 琀栀攀 爀攀最  property during POST time which was required by XXX system to ਀    愀氀氀漀眀 琀漀 挀漀氀氀攀挀琀 琀栀攀 䠀漀猀琀 眀眀瀀渀⼀眀眀渀渀 椀渀昀漀 搀甀爀椀渀最 堀堀堀 戀漀漀琀⸀⠀䌀刀㄀㘀　㔀㄀⤀ ਀㜀⸀  䘀椀砀攀搀 琀栀攀 戀甀最 漀渀 昀愀椀氀 琀漀 爀攀瀀漀爀琀 昀挀瀀ⴀ氀甀渀 漀渀 堀堀堀 猀漀昀琀眀愀爀攀 䈀伀伀吀 昀漀爀洀愀琀⸀ (CR16052)਀ 8. Added the new feature "show-wwpn-child", user can use this command਀    琀漀 猀栀漀眀 琀栀攀 䰀唀一猀 琀愀爀最攀琀 眀椀琀栀 琀栀攀 搀攀猀椀爀攀搀 圀圀倀一 漀渀氀礀 椀渀猀琀攀愀搀 漀昀 琀栀攀  whole WWPNs and LUNs.(CR16053) ਀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㌀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀㄀⸀  䈀甀最 昀椀砀攀搀 漀渀 挀愀渀渀漀琀 琀漀 挀漀渀昀椀最甀爀攀 戀漀漀琀 搀攀瘀椀挀攀 甀猀椀渀最 䐀䤀䐀 漀渀 堀堀堀 戀漀漀琀⸀ (CR14497)਀ 2. Bug fixed on error message "Data Stack corrupted!!!" when booting਀    眀椀琀栀 䘀挀漀搀攀 漀渀 匀伀䴀䔀 洀愀挀栀椀渀攀Ⰰ 琀栀攀 渀攀眀 爀攀氀攀愀猀攀 昀椀砀攀搀 琀栀椀猀 椀猀猀甀攀 戀礀  change the different device path /fp when booting with "SD Boot" ਀    昀漀爀洀愀琀⸀ ⠀䌀刀㄀㐀㘀㌀㌀⤀ ਀㌀⸀  匀甀瀀瀀漀爀琀攀搀 䔀ⴀ嘀倀䐀Ⰰ 椀昀 攀ⴀ嘀倀䐀 昀椀攀氀搀猀 愀爀攀 攀洀瀀琀礀 漀爀 戀氀愀渀欀 漀渀 琀栀攀 䠀䈀䄀 琀栀攀渀 the HBA will identified as it is today, if VPD HBA Model number info਀    椀猀 瀀爀攀猀攀渀琀Ⰰ 琀栀攀渀 搀椀猀瀀氀愀礀 琀栀攀 渀攀眀 嘀倀䐀 䠀䈀䄀 䴀漀搀攀氀 渀甀洀戀攀爀⸀ ⠀䌀刀㄀㔀㔀㄀㌀⤀  ਀㐀⸀  刀攀渀愀洀攀 昀甀渀挀琀椀漀渀 挀愀氀氀 昀漀爀 猀攀琀琀椀渀最 琀栀攀 戀漀漀琀 昀漀爀洀愀琀 昀爀漀洀 ∀猀攀琀ⴀ堀堀堀ⴀ漀渀∀  to "set-XXX-boot" to boot with XXX Boot format, and "set-XXX-off" ਀    琀漀 ∀猀攀琀ⴀ猀搀ⴀ戀漀漀琀∀ 琀漀 戀漀漀琀 眀椀琀栀 匀䐀 䈀漀漀琀 昀漀爀洀愀琀⸀ ⠀䌀刀㄀㔀㔀㄀㐀⤀  ਀㔀⸀  䐀椀猀愀戀氀攀 挀栀愀渀最攀 琀栀攀 匀䐀 䈀漀漀琀 昀漀爀洀愀琀 漀渀 堀堀堀ⴀ䈀爀愀渀搀攀搀 䠀䈀䄀⸀ 匀漀 琀栀攀 堀堀堀ⴀ䈀爀愀渀搀攀搀 adapter can only boot with XXX Boot format only. (CR15516)਀ 6. Changed new device name property for XXX Branded HBA from "emlxs" to ਀    ∀堀堀堀圀Ⰰ攀洀氀砀猀∀⸀ ⠀䌀刀㄀㔀㔀㄀㜀⤀ ਀㜀⸀  倀攀爀 琀栀攀 䘀䌀ⴀ䜀匀㐀 猀瀀攀挀Ⰰ 愀氀氀 䌀吀 挀漀洀洀愀渀搀猀 猀栀愀氀氀 栀愀瘀攀 愀 琀椀洀攀漀甀琀 瘀愀氀甀攀 漀昀  3 x R_A_TOV instead of 2 times. (CR15521)਀ 8. Change the new banner display on Fcode with the copyright. (CR15522)਀ 9. Added new support HBA LP1005 on the Fcode boot list. (CR15524)਀ ----------------------- NEW CHANGES 1.50a2 ------------------------਀ ਀㄀⸀  刀攀洀漀瘀攀搀 琀栀攀 ∀堀堀堀∀ 猀甀瀀瀀漀爀琀 猀琀愀琀甀猀 椀渀 䘀挀漀搀攀 ⸀瀀爀漀瀀攀爀琀椀攀猀 洀攀渀甀⸀  (CR14487)਀ 2. Changed the new copyright display in Fcode .properties menu਀    ∀䌀漀瀀礀爀椀最栀琀 ⠀䌀⤀ ㈀　　㐀 䔀洀甀氀攀砀 䐀攀猀椀最渀 愀渀搀 䴀愀渀甀昀愀挀琀甀爀椀渀最 䌀漀爀瀀漀爀愀琀椀漀渀⸀∀⸀ (CR14488)਀ 3. Bug fixed on cannot configure fcode boot target "fabboot" using ਀    琀栀攀 琀愀爀最攀琀 圀圀倀一 漀渀 匀琀漀爀愀最攀 愀爀爀愀礀⸀ ⠀䌀刀㄀㐀㐀㔀㔀⤀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀㄀  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀ 1. Bug fixed on stack overflow issue, changed the new input method on਀    ∀猀攀琀ⴀ戀漀漀琀ⴀ椀搀∀ 眀栀攀渀 挀漀渀昀椀最甀爀椀渀最 昀漀爀 琀栀攀 ∀ 堀堀堀∀ 昀愀戀戀漀漀琀 甀猀椀渀最 圀圀倀一  and LUN number without the Target ID. (CR13110)਀ 2. Removed FCODE banner display message during POST for "XXX" FC boot.਀    ⠀䌀刀㄀㌀㔀㐀㄀⤀ ਀㌀⸀  䌀栀愀渀最攀搀 渀攀眀 戀攀栀愀瘀椀漀爀 昀漀爀 䘀䌀伀䐀䔀 椀渀椀琀 倀伀匀吀 瀀爀漀挀攀搀甀爀攀 眀栀椀挀栀 䘀䌀伀䐀䔀 眀椀氀氀 not bring the link up and init the HBA during the POST, thus FCODE਀    眀椀氀氀 渀漀琀 眀愀椀琀 昀漀爀 琀栀攀 氀椀渀欀 甀瀀 眀栀攀渀 琀栀攀 䠀䈀䄀 椀猀 渀漀琀 挀漀渀渀攀挀琀 琀漀 琀栀攀 FC Target during init time. FCODE will only bring the link up during਀    琀栀攀 䘀䌀 戀漀漀琀 琀椀洀攀 漀爀 猀攀氀攀挀琀 琀栀攀 戀漀漀琀 搀攀瘀椀挀攀 戀礀 甀猀攀爀⸀ ⠀䌀刀㄀㌀㔀㐀㈀⤀ ਀㐀⸀  䄀搀搀攀搀 猀甀瀀瀀漀爀琀 昀漀爀 琀栀攀 堀堀堀ⴀ䈀爀愀渀搀攀搀 愀搀愀瀀琀攀爀Ⰰ 挀栀愀渀最攀搀 琀栀攀 渀攀眀 倀爀漀最爀愀洀 ID, and device name, and device type for "XXX" operation, such as ਀    挀栀愀渀最攀搀 琀栀攀 堀堀堀ⴀ戀爀愀渀搀攀搀 倀爀漀最爀愀洀 䤀䐀 眀椀琀栀 ∀　砀䘀䌀　　∀ 昀漀爀 䰀倀㄀　　　　ⴀ砀Ⰰ  and "0xFC10" for LP11000-x, replaced XXX-branded device name਀    瀀爀漀瀀攀爀琀礀 琀漀 ∀攀洀氀砀猀∀Ⰰ 䔀洀甀氀攀砀ⴀ戀爀愀渀搀攀搀 琀漀 ∀攀洀氀砀∀ 昀漀爀 ∀堀堀堀∀ 洀漀搀攀Ⰰ 愀渀搀  "lpfc" for "sd" mode, changed "XXX" operation device type from ਀    ∀匀䌀匀䤀∀ 琀漀 ∀匀䌀匀䤀ⴀ昀挀瀀∀⸀ ⠀䌀刀㄀㐀㈀㤀㜀⤀ ਀㔀⸀  䄀搀搀攀搀 琀栀攀 渀攀眀 戀攀栀愀瘀椀漀爀 漀渀 ∀搀攀挀漀搀攀ⴀ甀渀椀琀∀ 椀渀 猀攀挀漀渀搀 搀攀瘀椀挀攀 瀀愀琀栀 ∀昀瀀∀ of "XXX" boot, to solve the issue for there's not local access of ਀    匀䌀匀䤀 搀攀瘀椀挀攀 眀栀攀渀 琀栀攀 ∀堀堀堀∀ 椀猀 攀渀愀戀氀攀 漀渀 猀漀洀攀 猀礀猀琀攀洀⸀ This new fix will set the proper return for the "decode-unit" if the ਀    眀眀瀀渀 愀渀搀 氀甀渀 渀甀洀戀攀爀 愀爀攀 甀渀愀瘀愀椀氀愀戀氀攀Ⰰ 愀渀搀 氀攀琀 琀栀攀 猀礀猀琀攀洀 挀漀渀琀椀渀甀攀 琀漀  finish up the probe scan includes setting up the local SCSI device ਀    瀀愀琀栀⸀ ⠀䌀刀㄀㐀㈀㤀㠀⤀ ਀ऀ ਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ  一䔀圀 䌀䠀䄀一䜀䔀匀  ㄀⸀㔀　愀　  ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀ 1. This release supported the new FC boot with SUN "XXX" the "SAN ਀    䘀漀甀渀搀愀琀椀漀渀 匀漀昀琀眀愀爀攀∀⸀  䌀爀攀愀琀攀搀 渀攀眀 搀攀瘀椀挀攀 瀀愀琀栀 ∀昀瀀∀Ⰰ 愀渀搀 挀栀愀渀最攀搀 the child note from "sd" to "disk".਀ 2. Able to share one common code on SUN "XXX" FC Boot and Standard ਀    匀䌀匀䤀 匀䐀 䈀漀漀琀⸀  ਀㌀⸀  䄀搀搀攀搀 渀攀眀 昀攀愀琀甀爀攀 眀栀椀挀栀 甀猀攀爀 挀愀渀 愀戀氀攀 琀漀 猀攀氀攀挀琀 琀栀攀 戀漀漀琀 洀攀琀栀漀搀 between the "XXX" and "SCSI SD" boot using the command ਀    ∀猀攀琀ⴀ堀堀堀ⴀ漀渀∀ 琀漀 戀漀漀琀 眀椀琀栀 䘀䌀 愀渀搀 ∀猀攀琀ⴀ堀堀堀ⴀ漀昀昀∀ 琀漀 戀漀漀琀 眀椀琀栀  standard SCSI SD. The default mode is Standard SCSI SD mode.਀ 4. Changed to new device-name "emlx" for "XXX" instead of "lpfc".਀ 5. Added the "portWWN" and "portID" of the FC target into the reg ਀    瀀爀漀瀀攀爀琀礀 愀琀 琀栀攀 戀漀漀琀 琀椀洀攀 眀栀椀挀栀 眀愀猀 爀攀焀甀椀爀攀搀 戀礀 堀堀堀 琀漀 愀氀氀漀眀  "XXX" to collect the target ID in OS. ਀ 6. Added the new feature to boot "XXX" FC target with WWPN instead਀    漀昀 琀愀爀最攀琀 䤀䐀⸀  ਀㜀⸀  䌀爀攀愀琀攀搀 琀栀攀 渀攀眀 搀攀挀漀搀攀ⴀ甀渀椀琀Ⰰ 攀渀挀漀搀攀ⴀ甀渀椀琀 愀渀搀 搀攀挀漀搀攀 琀栀攀 眀眀瀀渀  into two parts of wwpn-hi and wwpn-lo to meet the requirement ਀    漀昀 堀堀堀⸀  ਀㠀⸀  䌀爀攀愀琀攀搀 琀栀攀 渀攀眀 搀攀瘀愀氀椀愀猀 渀愀洀攀 ∀昀愀戀戀漀漀琀∀ 昀漀爀 戀漀漀琀椀渀最 琀栀攀 ∀堀堀堀∀ 䘀䌀 target using the "boot fabboot" command in OBP, user can set the਀    戀漀漀琀 琀愀爀最攀琀 眀椀琀栀 ∀猀攀琀ⴀ戀漀漀琀ⴀ椀搀∀ 挀漀洀洀愀渀搀 甀猀椀渀最 攀椀琀栀攀爀 圀圀倀一Ⰰ 䐀䤀䐀 漀爀 Alpa. ਀ 9. Changed the display format for the wwpn from "2200.0020.37a5.ffd2"਀    琀漀 ∀㈀㈀　　　　㈀　㌀㜀愀㔀昀昀搀㈀∀ 漀渀 猀栀漀眀ⴀ挀栀椀氀搀爀攀渀 挀漀洀洀愀渀搀 眀栀椀挀栀 洀愀欀攀猀 攀愀猀椀攀爀 to set the boot device using "copy" and "paste" command.਀ ਀ ========================================================================਀ 1. Open Boot Firmware Update Procedure਀ The Open Boot is loaded in the same way as a firmware update is ਀瀀攀爀昀漀爀洀攀搀 愀渀搀 椀猀 搀椀猀琀爀椀戀甀琀攀搀 愀猀 愀 ⸀倀刀䜀 昀椀氀攀⸀ 䤀琀 挀漀甀氀搀 搀漀眀渀氀漀愀搀  through DOS based Lp6util if the adapter is first installed in a PC. ਀吀栀攀渀 瀀爀漀挀攀搀甀爀攀 甀渀搀攀爀 䐀伀匀 愀猀 昀漀氀氀漀眀㨀  ਀⠀㄀⤀ 䈀漀漀琀 琀栀攀 䐀伀匀 漀渀 倀䌀䤀 猀礀猀琀攀洀⸀ ਀⠀㈀⤀ 刀甀渀 䰀倀㘀䐀唀吀䤀䰀 爀攀瘀椀猀椀漀渀 㤀⸀　 漀爀 最爀攀愀琀攀爀  ⠀昀漀甀渀搀 漀渀 琀栀攀 爀攀氀攀愀猀攀搀 搀椀猀欀攀琀琀攀Ⰰ  CD-ROM, or FTP server)਀ All adapters in the system are detected and reset. A brief Introduction ਀    洀攀猀猀愀最攀 椀猀 搀椀猀瀀氀愀礀攀搀 眀椀琀栀 愀 洀攀渀甀 戀愀爀 漀渀 琀漀瀀 漀昀 琀栀攀 猀挀爀攀攀渀⸀ ਀⠀㌀⤀ 吀漀 洀愀欀攀 愀渀 攀渀琀爀礀 猀攀氀攀挀琀椀漀渀 椀渀 琀栀攀 瀀漀瀀ⴀ甀瀀 洀攀渀甀Ⰰ 瀀爀攀猀猀 䄀氀琀 欀攀礀Ⰰ 琀栀攀渀 洀漀瘀攀 the block cursor to that entry then hit Enter or you can hit the ਀    挀漀爀爀攀猀瀀漀渀搀椀渀最 栀椀最栀氀椀最栀琀攀搀 氀攀琀琀攀爀⸀ 吀漀 洀漀瘀攀 琀栀攀 戀氀漀挀欀 挀甀爀猀漀爀Ⰰ 礀漀甀 挀愀渀 甀猀攀  the Up/Down arrow key. ਀ (4) To obtain the pop-up menu for Update Flash menu, hold down the Alt key ਀    愀渀搀 栀椀琀 琀栀攀 ∀氀∀ 氀攀琀琀攀爀 欀攀礀⸀  吀栀攀渀 甀猀攀 琀栀攀 䐀漀眀渀 愀爀爀漀眀 欀攀礀 琀漀 猀攀氀攀挀琀 琀栀攀 "Download..."਀ (5) Hit Tab to move the cursor to the desired box to make the selection on ਀    琀栀攀 䐀爀椀瘀攀Ⰰ 琀栀攀 䐀椀爀攀挀琀漀爀礀Ⰰ 琀栀攀 䘀椀氀攀 漀昀 琀栀攀 椀洀愀最攀⸀ 圀椀琀栀 攀愀挀栀 栀椀最栀氀椀最栀琀攀搀 item, remember to hit to make that selection. The same goes for਀    琀栀攀 愀搀愀瀀琀攀爀 猀攀氀攀挀琀椀漀渀⸀  ਀⠀㘀⤀ 䠀椀琀 伀䬀 琀漀 猀琀愀爀琀 搀漀眀渀氀漀愀搀⸀ ਀    吀栀椀猀 椀洀愀最攀 昀椀氀攀 椀猀 搀漀眀渀氀漀愀搀攀搀 椀渀琀漀 琀栀攀 砀伀砀砀砀砀✀猀 䘀䰀䄀匀䠀⸀  吀栀攀 漀瀀攀爀愀琀椀漀渀 猀栀漀甀氀搀  take less than minute to complete.਀ NOTE: The update operation must not be interrupted or the FLASH may become ਀     挀漀爀爀甀瀀琀攀搀⸀ 䤀昀 琀栀椀猀 漀挀挀甀爀猀Ⰰ 琀栀攀 䄀搀愀瀀琀攀爀 洀甀猀琀 戀攀 爀攀琀甀爀渀攀搀 琀漀 䔀洀甀氀攀砀 昀漀爀 䘀䰀䄀匀䠀   update. This condition can be identified by POST failure, usually when no ਀     䰀䔀䐀猀 琀甀爀渀 漀渀⸀ ਀⠀㜀⤀ 刀攀洀漀瘀攀 琀栀攀 䄀搀愀瀀琀攀爀 昀爀漀洀 倀䌀 猀礀猀琀攀洀Ⰰ 渀漀眀 琀栀攀 伀瀀攀渀 䈀漀漀琀 椀猀 爀攀愀搀礀 琀漀 甀猀攀⸀   ਀䠀漀眀攀瘀攀爀 伀瀀攀渀 䈀漀漀琀 挀愀渀 愀氀猀漀 搀漀眀渀氀漀愀搀 琀栀爀漀甀最栀 唀一䤀堀 戀愀猀攀搀 甀渀搀攀爀 Sun Solaris lputil utility, only if the adapter and the latest lpfc਀搀爀椀瘀攀爀 椀猀 昀椀爀猀琀 椀渀猀琀愀氀氀攀搀 椀渀 匀甀渀 匀漀氀愀爀椀猀 匀礀猀琀攀洀⸀ 䄀渀搀 椀琀 洀甀猀琀 戀漀漀琀 Sun Solaris from the local disk. Otherwise, unpredictable damage਀洀椀最栀琀 栀愀瀀瀀攀渀⸀ ਀⠀㄀⤀ 伀瀀琀椀漀渀 ㌀ 䘀椀爀洀眀愀爀攀 䴀愀椀渀琀攀渀愀渀挀攀 (2) Option 1 Load Firmware Image਀ ******** Note *********਀ If the Open Boot has never been loaded into the FC adapter before,਀愀渀搀 椀琀 栀愀猀 戀攀攀渀 甀猀攀 甀渀搀攀爀 琀栀攀 搀攀瘀椀挀攀 瀀愀琀栀 渀愀洀攀 ∀昀椀戀爀攀ⴀ挀栀愀渀渀攀氀∀ 漀琀栀攀爀  than "lpfc" in Sun Solaris system, in order to download Fcode and ਀戀漀漀琀 昀爀漀洀 䘀䌀 搀椀猀欀Ⰰ 挀漀渀瘀攀爀琀 琀栀攀 瀀愀琀栀 渀愀洀攀 椀渀琀漀 ∀氀瀀昀挀∀ 椀猀 爀攀焀甀椀爀攀搀Ⰰ the procedure as follow:਀ (1) Boot up the Sun Solaris local disk.਀⠀㈀⤀ 䐀漀眀渀氀漀愀搀 琀栀攀 氀愀琀攀猀琀 氀瀀昀挀 搀爀椀瘀攀爀⸀   (3) Run the lputil @ "/usr/sbin/lpfc/lputil" and download the Fcode਀    昀氀愀猀栀⸀ (4) Run "/usr/sbin/lpfc/convert_path_lpfc" to convert the path into਀    ∀氀瀀昀挀∀ (5) Reboot the system. ਀ Note: Please be aware, once the path has been converted into "lpfc",਀      椀琀 挀愀渀✀琀 最漀 戀愀挀欀 琀漀 琀栀攀 漀爀椀最椀渀愀氀 ⠀∀昀椀戀爀攀ⴀ挀栀愀渀渀攀氀∀⤀ 瀀愀琀栀⸀  ਀ 2. Open Boot Setup Procedure on "lpfc"਀ Note: Always reset the system before making any changes to your Fcode ਀      伀瀀攀渀 䈀漀漀琀 猀攀琀琀椀渀最猀⸀ 䌀栀愀渀最攀猀 眀椀氀氀 渀漀琀 戀攀 猀愀瘀攀搀 椀昀 愀 爀攀猀攀琀 椀猀 渀漀琀 performed first. ਀ ਀愀⸀ 吀漀 爀攀猀攀琀 椀渀琀漀 搀攀昀愀甀氀琀 瘀愀氀甀攀 洀漀搀攀㨀 ਀   漀欀 猀攀琀ⴀ搀攀昀愀甀氀琀ⴀ洀漀搀攀 ਀ b. To select the multiple adapters:਀         ok show-devs /* show all system devices */਀   漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀⌀∀ 猀攀氀攀挀琀ⴀ搀攀瘀      ⼀⨀ 猀攀氀攀挀琀 ⼀氀瀀昀挀䀀⌀ ⨀⼀ ਀  一漀琀攀㨀  唀渀搀攀爀 琀栀攀 猀栀漀眀ⴀ搀攀瘀猀Ⰰ 眀攀 眀椀氀氀 昀漀甀渀搀 琀栀攀 瀀愀琀栀 攀渀搀 眀椀琀栀 氀瀀昀挀䀀⌀Ⰰ where the # will be the actual number of FC adapter.਀                                                   ਀挀⸀ 吀漀 搀椀猀瀀氀愀礀 漀瀀攀渀 戀漀漀琀 搀爀椀瘀攀爀 瘀攀爀猀椀漀渀㨀 ਀   漀欀 猀栀漀眀ⴀ搀攀瘀猀                             ok " /pci@1f,0/pci@1/lpfc@1" select-dev ਀                                  ⼀⨀ 猀攀氀攀挀琀 氀瀀昀挀䀀㄀ ⠀昀漀爀 攀砀愀洀瀀氀攀⤀ ⨀⼀ ok .focde਀   漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ਀搀⸀ 吀漀 猀攀琀 琀栀攀 氀椀渀欀 猀瀀攀攀搀㨀 ਀   漀欀 猀攀琀ⴀ氀椀渀欀ⴀ猀瀀攀攀搀 ਀攀⸀ 吀漀 搀椀猀瀀氀愀礀 琀栀攀 琀漀瀀漀氀漀最礀 漀昀 琀栀攀 挀甀爀爀攀渀琀 搀攀瘀椀挀攀㨀 ਀   漀欀 猀栀漀眀ⴀ搀攀瘀猀                             ok " /pci@1f,0/pci@1/lpfc@1" select-dev ਀                                  ⼀⨀ 猀攀氀攀挀琀 氀瀀昀挀䀀㄀ ⠀昀漀爀 攀砀愀洀瀀氀攀⤀ ⨀⼀ ok .topology਀ For intended (target) fibre channel boot disk select appropriate਀  琀漀瀀漀氀漀最礀 攀椀琀栀攀爀 瀀漀椀渀琀ⴀ琀漀ⴀ瀀漀椀渀琀Ⰰ 䘀䌀ⴀ䄀䰀Ⰰ 漀爀 愀甀琀漀 洀漀搀攀㨀 ਀     椀昀 瀀漀椀渀琀ⴀ琀漀ⴀ瀀漀椀渀琀 ⠀昀漀爀 挀漀渀渀攀挀琀 琀漀 琀栀攀 猀眀椀琀挀栀⤀ ਀        漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀 ok set-ptp ਀        漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ok reset-all ਀ if public or private loop (for connect to the hub)਀ ok " /pci@1f,0/pci@1/lpfc@1" select-dev਀        漀欀 猀攀琀ⴀ昀挀ⴀ愀氀             ok unselect-dev਀        漀欀 爀攀猀攀琀ⴀ愀氀氀 ਀ if auto topology with public or private loop first਀ ok " /pci@1f,0/pci@1/lpfc@1" select-dev਀        漀欀 猀攀琀ⴀ愀甀琀漀ⴀ昀挀愀氀             ok unselect-dev਀        漀欀 爀攀猀攀琀ⴀ愀氀氀 ਀     椀昀 愀甀琀漀 琀漀瀀漀氀漀最礀 眀椀琀栀 瀀漀椀渀琀ⴀ琀漀ⴀ瀀漀椀渀琀 昀椀爀猀琀 ਀        漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀 ok set-auto-ptp ਀        漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ok reset-all਀ Note: By default, the topology is set to auto-FCAL.਀            䤀昀 漀渀氀礀 漀渀攀 挀愀爀搀 愀渀搀 搀攀瘀椀挀攀 挀漀渀渀攀挀琀猀 琀漀 琀栀攀 猀眀椀琀挀栀Ⰰ 琀栀攀 auto-sensing mode will comes on as point-to-point first.਀ ਀昀⸀ 吀漀 搀椀猀瀀氀愀礀 琀栀攀 愀氀氀 匀䌀匀䤀 愀渀搀 䘀椀戀爀攀 䌀栀愀渀渀攀氀 搀攀瘀椀挀攀猀㨀  ਀        漀欀 瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀 ਀最⸀ 吀漀 搀椀猀瀀氀愀礀 琀栀攀 愀氀氀 圀圀倀一猀 愀渀搀 䰀唀一猀㨀  ਀        漀欀 猀栀漀眀ⴀ挀栀椀氀搀爀攀渀 ਀栀⸀ 吀漀 搀椀猀瀀氀愀礀 琀栀攀 搀攀猀椀爀攀搀 圀圀倀一 愀渀搀 䰀唀一猀㨀  ਀        漀欀 ㈀㈀　　　　㈀　㌀㜀㤀㤀㜀昀㜀　 猀栀漀眀ⴀ眀眀瀀渀ⴀ挀栀椀氀搀 ਀ i. To display the current boot device id: ਀       ok show-devs ਀        漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀  /* select lpfc@1 (for example) */਀        漀欀 ⸀戀漀漀琀ⴀ椀搀 ਀樀⸀ 吀漀 猀攀琀 戀漀漀琀 搀攀瘀椀挀攀 椀搀㨀   ਀      䴀愀欀攀 渀漀琀攀 漀昀 琀栀攀 愀挀琀甀愀氀 眀眀瀀渀Ⰰ 搀椀搀 漀爀 愀氀瀀愀 爀攀琀甀爀渀攀搀 昀爀漀洀 琀栀攀  probe and copy down the corresponding boot entry.਀ To use wwpn ( point to point):਀ ok " /pci@1f,0/pci@1/lpfc@1" select-dev਀           漀欀 眀眀瀀渀 㰀眀眀瀀渀㸀 㰀氀甀渀㸀 㰀琀愀爀最攀琀 椀搀㸀 猀攀琀ⴀ戀漀漀琀ⴀ椀搀 ok unselect-dev਀ : must in hex਀           㰀氀甀渀㸀 㨀 搀攀昀愀甀氀琀 椀猀 椀渀 栀攀砀Ⰰ 琀漀 挀栀愀渀最攀 搀攀挀椀洀愀氀 琀礀瀀攀 搀⌀ 㰀氀甀渀㸀 : default is in hex, to change decimal type d# ਀ Example: 2200.0020.3799.7f70 d# 140 d# 10 set-boot-id਀          ਀        吀漀 甀猀攀 搀椀搀 ⠀瀀甀戀氀椀挀 氀漀漀瀀⤀㨀 ਀           漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀 ok did set-boot-id਀           漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ਀           㰀搀椀搀㸀 㨀 洀甀猀琀 椀渀 栀攀砀 : default is in hex, to change decimal type d# ਀           㰀琀愀爀最攀琀 椀搀㸀 㨀 搀攀昀愀甀氀琀 椀猀 椀渀 栀攀砀Ⰰ 琀漀 挀栀愀渀最攀 搀攀挀椀洀愀氀 琀礀瀀攀 搀⌀  ਀        䔀砀愀洀瀀氀攀㨀 ㈀　　㤀攀㄀ 搀⌀ ㄀　　 搀⌀ ㄀　 猀攀琀ⴀ戀漀漀琀ⴀ椀搀 ਀ To use alpa (private loop):਀ ok " /pci@1f,0/pci@1/lpfc@1" select-dev਀           漀欀 愀氀瀀愀 㰀愀氀瀀愀㸀 㰀氀甀渀㸀 㰀琀愀爀最攀琀 椀搀㸀 猀攀琀ⴀ戀漀漀琀ⴀ椀搀 ok unselect-dev਀ : must in hex਀           㰀氀甀渀㸀 㨀 搀攀昀愀甀氀琀 椀猀 椀渀 栀攀砀Ⰰ 琀漀 挀栀愀渀最攀 搀攀挀椀洀愀氀 琀礀瀀攀 搀⌀ 㰀氀甀渀㸀 : default is in hex, to change decimal type d# ਀ Example: e1 d# 100 d# 10 set-boot-id਀          ਀        吀漀 爀攀洀漀瘀攀 戀漀漀琀 椀搀 㨀 ਀           漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀       ok remove-boot-id /* to clear boot id settings */਀           漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ਀                    伀刀 ਀           漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀       ok set-default-mode /* to clear boot id settings */਀           漀欀 甀渀猀攀氀攀挀琀ⴀ搀攀瘀 ਀欀⸀ 吀漀 猀眀椀琀挀栀 戀攀琀眀攀攀渀 堀堀堀 愀渀搀 匀䐀 䈀漀漀琀 䘀漀爀洀愀琀㨀 ਀           漀欀 猀攀琀ⴀ堀堀堀ⴀ戀漀漀琀        ⼀⨀ 猀眀椀琀挀栀 琀漀 堀堀堀 䈀漀漀琀 䘀漀爀洀愀琀⨀⼀ ok set-sd-boot /* switch to SD Boot Format*/਀ l. To set the F-Code Diag Switch:਀ ok set-fdiag-switch /* print debug message during POST */ ਀            ਀洀⸀ 吀漀 搀椀猀瀀氀愀礀 愀氀氀 琀栀攀 挀甀爀爀攀渀琀 昀氀愀最 昀漀爀 漀瀀攀渀 戀漀漀琀 搀爀椀瘀攀爀㨀                 ਀ ok show-devs ਀           漀欀 ∀ ⼀瀀挀椀䀀㄀昀Ⰰ　⼀瀀挀椀䀀㄀⼀氀瀀昀挀䀀㄀∀ 猀攀氀攀挀琀ⴀ搀攀瘀  /* select lpfc@1 (for example) */਀           漀欀 ⸀渀瘀爀愀洀 ਀           吀栀攀 昀漀氀氀漀眀椀渀最 椀渀昀漀爀洀愀琀椀漀渀 眀椀氀氀 戀攀 搀椀猀瀀氀愀礀 ਀              匀椀最渀愀琀甀爀攀           ⼀⨀ 漀瀀攀渀 戀漀漀琀 猀椀最渀愀琀甀爀攀 ⨀⼀  Vaild_flag /* internal flag for open boot */ ਀              䠀漀猀琀开搀椀搀            ⼀⨀ 猀栀漀眀猀 栀漀猀琀 搀椀搀 渀甀洀戀攀爀 ⨀⼀ Enable_flag /* internal flag for open boot */਀              匀䘀匀开匀甀瀀瀀漀爀琀         ⼀⨀ 猀甀瀀瀀漀爀琀 匀䘀匀 昀氀愀最 ⨀⼀ Topology_flag /* topology flag for open boot */਀              䰀椀渀欀开匀瀀攀攀搀开昀氀愀最     ⼀⨀ 猀攀琀 氀椀渀欀 猀瀀攀攀搀 ⨀⼀ Diag_Switch /* set fcode diag switch */ ਀              䈀漀漀琀开椀搀             ⼀⨀ 猀栀漀眀猀 琀愀爀最攀琀 椀搀 渀甀洀戀攀爀 ⨀⼀ Lnk_timer /* internal use for open boot */਀              倀氀漀最椀开琀椀洀攀爀         ⼀⨀ 椀渀琀攀爀渀愀氀 甀猀攀 昀漀爀 漀瀀攀渀 戀漀漀琀 ⨀⼀ LUN /* shows Boot LUN in use */਀              䐀䤀䐀                 ⼀⨀ 猀栀漀眀猀 䈀漀漀琀 䤀䐀 椀渀 甀猀攀 ⨀⼀ WWPN /* shows Boot WWPN in use */਀ Note: Target id can be bind to either did (destination id)਀             漀爀 眀眀瀀渀 ⠀眀漀爀氀搀眀椀搀攀 瀀漀爀琀 渀愀洀攀⤀ 愀渀搀 猀愀瘀攀搀 椀渀 琀栀攀 愀搀愀瀀琀攀爀 nvram. It can also save in the environment variable ਀             戀漀漀琀ⴀ搀攀瘀椀挀攀⸀   wwpn set-boot-id : ਀             戀椀渀搀椀渀最 琀愀爀最攀琀ⴀ椀搀 眀椀琀栀 眀眀瀀渀 愀渀搀 氀甀渀⸀   did set-boot-id : ਀             戀椀渀搀椀渀最 琀愀爀最攀琀ⴀ椀搀 眀椀琀栀 搀椀搀 愀渀搀 氀甀渀⸀ ਀ ਀ 3. Make Fibre Channel Bootable System "SCSI SD" Disk ਀       Note: If fibre channel disk(s) is not found when system is up ਀         椀琀 洀愀礀 戀攀 渀攀挀攀猀猀愀爀礀 琀漀 搀漀 漀渀攀 漀昀 戀漀琀栀 漀昀 琀栀攀 昀漀氀氀漀眀椀渀最㨀 ਀      ⠀愀⤀ 䔀渀琀攀爀 琀栀攀 昀漀氀氀漀眀椀渀最 ∀琀漀甀挀栀 ⼀爀攀挀漀渀昀椀最甀爀攀∀  愀渀搀 琀栀攀渀 爀攀戀漀漀琀 (b) Edit the /kernel/drv/lpfc.conf file on boot disk and change ਀          琀栀攀 琀漀瀀漀氀漀最礀 昀爀漀洀 㐀 琀漀 ㈀  漀爀  琀栀攀 爀攀瘀攀爀猀攀⸀ ਀   吀栀椀猀 瀀爀漀挀攀搀甀爀攀 洀愀礀 戀攀 甀猀攀搀 琀漀 洀愀欀攀 愀 戀漀漀琀愀戀氀攀 猀礀猀琀攀洀 搀椀猀欀 昀爀漀洀  any size logical disk. This procedure also requires that a 'local'਀   戀漀漀琀 搀椀猀欀 戀攀 甀猀攀搀 琀漀 戀甀椀氀搀 琀栀攀 昀椀戀爀攀 挀栀愀渀渀攀氀 戀漀漀琀 搀椀猀欀⸀ ਀   吀栀攀 䘀漀氀氀漀眀椀渀最 攀砀愀洀瀀氀攀 眀椀氀氀 愀猀猀甀洀攀 琀栀愀琀 琀栀攀 甀猀攀爀 栀愀猀 猀攀氀攀挀琀攀搀  logical drive designated as "c1t1d0" (controller 1, target 1,਀   氀甀渀 　⤀ 琀栀漀甀最栀 愀渀礀 洀愀礀 戀攀 猀攀氀攀挀琀攀搀⸀ ਀   䄀昀琀攀爀 戀漀漀琀 昀爀漀洀 氀漀挀愀氀 猀礀猀琀攀洀 搀椀猀欀 ਀      刀甀渀 昀漀爀洀愀琀 甀琀椀氀椀琀礀  ⠀攀渀琀攀爀 ✀昀漀爀洀愀琀✀⤀  ਀        ⠀愀⤀ 匀攀氀攀挀琀 氀漀最椀挀愀氀 搀爀椀瘀攀 琀漀 戀攀挀漀洀攀 戀漀漀琀 搀椀猀欀⸀    (b) Select partition option and partition disk as desired.਀        ⠀挀⤀ 猀攀氀攀挀琀 氀愀戀攀氀 漀瀀琀椀漀渀 愀渀搀 眀爀椀琀攀 瘀漀氀甀洀攀 氀愀戀攀氀 琀漀 琀愀爀最攀琀 搀椀猀欀⸀ ਀       ⨀ 䤀昀 渀攀挀攀猀猀愀爀礀Ⰰ 瘀椀攀眀 洀愀渀 瀀愀最攀 漀渀 昀漀爀洀愀琀 甀琀椀氀椀琀礀  ⠀∀洀愀渀 昀漀爀洀愀琀∀⤀ ਀      䤀渀猀琀愀氀氀 戀漀漀琀 漀渀 瀀愀爀琀椀琀椀漀渀 　 漀昀 琀愀爀最攀琀 搀椀猀欀 眀椀琀栀 琀栀攀 昀漀氀氀漀眀椀渀最 command (c1t1d0 - for example):਀ installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev਀         ⼀爀搀猀欀⼀挀㄀琀㄀搀　猀　 ਀      䌀爀攀愀琀攀 愀 昀椀氀攀猀礀猀琀攀洀 昀漀爀 攀愀挀栀 瀀愀爀琀椀琀椀漀渀 眀栀椀挀栀 眀椀氀氀 挀漀渀琀愀椀渀 愀  mounted Filesystem. ਀ newfs -v /dev/rdsk/c1t1d0s0 (will become root)਀         渀攀眀昀猀 ⴀ瘀 ⼀搀攀瘀⼀爀搀猀欀⼀挀㄀琀㄀搀　猀㘀    ⠀眀椀氀氀 戀攀挀漀洀攀 甀猀爀⤀ newfs -v /dev/rdsk/c1t1d0s7 (will become export/home)਀ ਀      䌀爀攀愀琀攀 琀攀洀瀀漀爀愀爀礀 洀漀甀渀琀 瀀漀椀渀琀猀 昀漀爀 琀栀攀 渀攀眀 瀀愀爀琀椀琀椀漀渀猀Ⰰ 猀漀 琀栀攀礀 can be mounted for copying.਀ mkdir /root2਀         洀欀搀椀爀 ⼀甀猀爀㈀ mkdir /export2਀ ਀      䘀漀爀 琀栀攀 ⼀搀攀瘀⼀昀搀 洀甀猀琀 戀攀 甀渀洀漀甀渀琀 琀漀 挀漀瀀礀 琀栀攀 爀漀漀琀 昀椀氀攀 猀礀猀琀攀洀⸀ ਀         䘀椀爀猀琀 ✀欀椀氀氀✀ 琀栀攀 瘀漀氀甀洀攀 洀愀渀愀最攀爀  ਀         䔀渀琀攀爀 瀀猀 ⴀ攀昀簀最爀攀瀀 瘀漀氀搀 ⼀⨀ 琀漀 漀戀琀愀椀渀 琀栀攀 瀀爀漀挀攀猀猀 椀搀  ⠀倀䤀䐀⤀ ⨀⼀ Enter kill -9 PID /* where PID is obtained above */਀         䔀渀琀攀爀 甀洀漀甀渀琀 ⼀搀攀瘀⼀昀搀 ਀      䴀漀甀渀琀Ⰰ 挀漀瀀礀 琀栀攀渀 甀渀洀漀甀渀琀 琀栀攀 甀猀爀 昀椀氀攀 猀礀猀琀攀洀㨀 ਀         洀漀甀渀琀 ⼀搀攀瘀⼀搀猀欀⼀挀㄀琀㄀搀　猀㘀 ⼀甀猀爀㈀ cd /usr਀         琀愀爀 挀瘀昀 ⴀ ⨀ 簀 ⠀ 挀搀 ⼀甀猀爀㈀㬀 琀愀爀 砀昀 ⴀ ⤀ umount /usr2਀  To copy the export/home file system:਀ mount /dev/dsk/c1t1d0s7 /export2਀         挀搀 ⼀攀砀瀀漀爀琀 tar cvf - * | (cd /export2; tar xf - )਀         甀洀漀甀渀琀 ⼀攀砀瀀漀爀琀㈀ ਀      䌀漀瀀礀椀渀最 琀栀攀 爀漀漀琀 昀椀氀攀 猀礀猀琀攀洀  ਀      愀⸀ 吀漀 戀甀椀氀搀 愀 昀椀氀攀 氀椀猀琀 昀椀爀猀琀 ਀         挀搀 ⼀ ls -a > root_copy਀         甀猀攀 琀栀攀 攀搀椀琀漀爀Ⰰ 瘀椀Ⰰ 琀漀 攀搀椀琀 爀漀漀琀开挀漀瀀礀 愀渀搀 搀攀氀攀琀攀  the following entries:਀ . .. proc, usr, usr2, export, export2, and any other ਀         愀瀀瀀愀爀攀渀琀 昀椀氀攀猀礀猀琀攀洀 搀椀猀瀀氀愀礀攀搀 戀礀 琀栀攀 ✀搀昀✀  挀漀洀洀愀渀搀⸀ ਀         吀栀攀渀 樀漀椀渀 昀椀氀攀 渀愀洀攀猀 猀漀 琀栀愀琀 琀栀攀礀 愀爀攀 漀渀 漀渀攀 氀椀渀攀 甀猀椀渀最 in vi. Add the tar command to the file list ਀         猀漀 琀栀愀琀 琀栀攀 爀攀猀甀氀琀 氀漀漀欀猀 氀椀欀攀 琀栀椀猀㨀 ਀         琀愀爀 挀瘀昀 ⴀ ⸀堀愀甀琀栀漀爀椀琀礀 ⸀挀瀀爀开挀漀渀昀椀最 ⸀搀琀 ⸀搀琀瀀爀漀昀椀氀攀 吀吀开䐀䈀  arg bak bin cdrom dev devices doit etc firmware fun ਀         欀攀爀渀攀氀 氀椀戀 洀渀琀 洀琀 渀攀琀 漀瀀琀 瀀氀愀琀昀漀爀洀 猀戀椀渀 琀椀洀攀爀 琀洀瀀 瘀愀爀  vol xfn | (cd /root2; tar xf - )਀ b. To Perform copy਀ mount /dev/dsk/c1t1d0s0 /root2਀             挀栀洀漀搀 㜀㜀㜀 爀漀漀琀开挀漀瀀礀 sh root_copy਀ c. Create the additional mount points (filesystem name)਀ cd /root2਀             洀欀搀椀爀 甀猀爀 mkdir export਀             洀欀搀椀爀 瀀爀漀挀 ਀          刀攀瀀攀愀琀 昀漀爀 愀渀礀 漀琀栀攀爀 洀漀甀渀琀 甀渀椀焀甀攀 洀漀甀渀琀 瀀漀椀渀琀 眀栀椀挀栀 眀愀猀  excluded in the copy procedure.਀   Edit /root2/etc/vfstab to point to "new" boot disk as physical ਀      氀漀挀愀琀椀漀渀 漀昀 洀漀甀渀琀 瀀漀椀渀琀猀 昀漀爀 爀漀漀琀Ⰰ 猀眀愀瀀Ⰰ 甀猀爀Ⰰ 攀砀瀀漀爀琀Ⰰ 愀渀搀 攀琀挀⸀ ਀         䌀栀愀渀最攀 琀栀攀 挀甀爀爀攀渀琀 攀渀琀爀椀攀猀 昀爀漀洀 ਀    ⼀搀攀瘀⼀搀猀欀⼀挀　琀　搀　猀㄀                      琀漀 猀栀漀眀 挀㄀琀㄀搀　猀㄀  ⠀猀眀愀瀀⤀ /dev/dsk/c0t0d0s0 & /dev/rdsk/c0t0d0s0 to show c1t1d0s0 (root)਀    ⼀搀攀瘀⼀搀猀欀⼀挀　琀　搀　猀㘀 ☀ ⼀搀攀瘀⼀爀搀猀欀⼀挀　琀　搀　猀㘀 琀漀 猀栀漀眀 挀㄀琀㄀搀　猀㘀  ⠀甀猀爀⤀ /dev/dsk/c0t0d0s7 & /dev/rdsk/c0t0s0s7 to show c1t1d0s7 (export)਀     ਀      䤀昀 洀甀氀琀椀瀀氀攀 琀愀爀最攀琀猀 攀砀椀猀琀 漀渀 昀椀戀爀攀 挀栀愀渀渀攀氀 愀搀愀瀀琀攀爀 椀琀 眀椀氀氀 be necessary to edit /root2/kernel/drv/lpfc.conf to set up਀      ✀瀀攀爀猀椀猀琀攀渀琀 戀椀渀搀椀渀最✀ 眀栀椀挀栀 眀椀氀氀 攀渀猀甀爀攀 琀栀愀琀 琀栀攀 搀攀猀椀爀攀搀  logical disk is always assigned the correct target ID. See ਀      椀渀猀琀爀甀挀琀椀漀渀猀 椀渀 氀瀀昀挀⸀挀漀渀昀 昀椀氀攀 琀漀 猀攀琀 瀀攀爀猀椀猀琀攀渀琀 戀椀渀搀椀渀最⸀ ਀          䐀椀猀欀 椀猀 渀漀眀 爀攀愀搀礀 琀漀 甀猀攀 愀猀 戀漀漀琀 搀椀猀欀 ਀ Shutdown system਀ ਀      匀攀琀甀瀀 匀瀀愀爀挀 洀漀渀椀琀漀爀 愀渀搀 氀瀀昀挀 栀漀猀琀 愀搀愀瀀琀攀爀 昀漀爀 戀漀漀琀 椀昀  not done already.਀ ਀      䄀琀 琀栀攀 漀欀 倀爀漀洀瀀琀 吀夀倀䔀㨀    ਀               戀漀漀琀 搀椀猀欀 ਀      吀栀攀 猀礀猀琀攀洀 渀漀眀 猀栀漀甀氀搀 戀漀漀琀 漀渀 琀栀攀 昀椀戀爀攀 挀栀愀渀渀攀氀 搀椀猀欀⸀ ਀㐀⸀ 吀爀漀甀戀氀攀猀栀漀漀琀椀渀最 ਀  ⠀㄀⤀ 䐀甀爀椀渀最 戀漀漀琀 瀀爀漀挀攀猀猀 挀愀渀渀漀琀 洀漀甀渀琀 漀爀 昀猀挀欀 ⼀甀猀爀Ⰰ 琀栀攀 瘀昀猀琀愀戀  on fibre channel boot disk not updated correctly persistent਀      戀椀渀搀椀渀最 渀漀琀 椀洀瀀氀攀洀攀渀琀攀搀 漀爀 椀洀瀀氀攀洀攀渀琀攀搀 椀渀挀漀爀爀攀挀琀氀礀⸀ ਀         (2) After entering 'boot disk', the message appears that file ਀      眀栀椀挀栀 眀愀猀 氀漀愀搀攀搀 椀猀 渀漀琀 攀砀攀挀甀琀愀戀氀攀⸀  There probably not boot on target disk, or copy from local to ਀      挀漀爀爀攀挀琀 琀愀爀最攀琀 眀愀猀 渀漀琀 猀甀挀挀攀猀猀昀甀氀⸀ ਀  ⠀㌀⤀ 匀礀猀琀攀洀 栀愀渀最猀 昀漀爀 愀 氀漀渀最 琀椀洀攀 愀昀琀攀爀 搀椀猀瀀氀愀礀椀渀最 搀椀瘀攀爀 椀渀昀漀爀洀愀琀椀漀渀 or reboots just after displaying diver information. Possible ਀      椀渀挀漀爀爀攀挀琀 琀漀瀀漀氀漀最礀 椀渀 ⼀欀攀爀渀攀氀⼀搀爀瘀⼀氀瀀昀挀⸀挀漀渀昀 昀椀氀攀 漀渀 琀愀爀最攀琀 搀椀猀欀⸀ ਀ 5. Useful monitor commands਀ When in the system monitor ("ok") prompt.਀ show-devs display current system devices {See Sec. 2b}਀   ⸀昀挀漀搀攀           搀椀猀瀀氀愀礀 挀甀爀爀攀渀琀 瘀攀爀猀椀漀渀 漀昀 漀瀀攀渀 戀漀漀琀 笀匀攀攀 匀攀挀⸀ ㈀挀紀 .topology display current FC topology {See Sec. 2e}਀   瀀爀漀戀攀ⴀ猀挀猀椀ⴀ愀氀氀   搀椀猀瀀氀愀礀 挀甀爀爀攀渀琀 匀䌀匀䤀 ☀ 䘀䌀 搀攀瘀椀挀攀     笀匀攀攀 匀攀挀⸀ ㈀昀紀 .boot-id display current boot device id {See Sec. 2i}਀   ⸀渀瘀爀愀洀           搀椀猀瀀氀愀礀 挀甀爀爀攀渀琀 昀氀愀最猀 昀漀爀 漀瀀攀渀 戀漀漀琀  笀匀攀攀 匀攀挀⸀ ㈀洀紀 ਀ ਀ ***********************************************************************************਀ ਀ IV. EFIBoot਀ ਀ The current EFI (Extensible Firmware Interface) Boot provides 64-bit System ਀戀漀漀琀 挀愀瀀愀戀椀氀椀琀礀 琀栀爀漀甀最栀 琀栀攀 甀猀攀 漀昀 琀栀攀 䔀䘀䤀 匀栀攀氀氀⸀  吀栀椀猀 䔀䘀䤀䈀漀漀琀 猀甀瀀瀀漀爀琀猀 䔀䘀䤀  Specification 1.10 and EFI Source Code version 1.10.14.61.਀    The EFIBoot supports:਀ (1) Multi-Topology : Fabric Point to Point; FC-AL: Private loop and Public਀                           氀漀漀瀀⸀ ਀  ⠀㈀⤀  䔀䘀䤀 倀爀漀琀漀挀漀氀猀     㨀 䌀漀渀昀椀最甀爀愀琀椀漀渀Ⰰ 䌀漀洀瀀漀渀攀渀琀 一愀洀攀Ⰰ 䐀椀愀最渀漀猀琀椀挀猀 愀渀搀  Firmware Update Supported.਀ (3) Operating System : Windows Server 2003 and Red-Hat Linux Supported.਀ (4) Multi-Device path : Fibre/SCSI Device path Selectable through the Driver਀                           挀漀渀昀椀最甀爀愀琀椀漀渀 倀爀漀琀漀挀漀氀⸀ ਀  ⠀㔀⤀  䴀甀氀琀椀ⴀ䤀渀椀琀椀愀琀漀爀猀  㨀 唀瀀 琀漀 ㄀㈀㠀 愀搀愀瀀琀攀爀猀 椀渀 愀 猀礀猀琀攀洀⸀ ਀  ⠀㘀⤀  䴀甀氀琀椀ⴀ䈀漀漀琀        㨀 䔀椀最栀琀 琀愀爀最攀琀猀 猀攀氀攀挀琀愀戀氀攀 琀栀爀漀甀最栀 琀栀攀 䐀爀椀瘀攀爀  configuration Protocol.਀ (7) Multi-LUNs : Up to 4096 LUNs ਀ (8) Multi-Mode : Supported.਀ (9) Multi-Utility : Setup and Firmware update supported.਀ ਀ ***** Important Note ******਀ (1) EFIBoot was not enabled from loading to system memory: ਀       If the adapter EFIBoot is not enabled from loading to system, this adapter ਀      眀椀氀氀 渀漀琀 戀攀 挀漀渀昀椀最甀爀攀搀⸀ 唀猀攀爀 洀甀猀琀 甀猀攀 䰀倀㘀搀甀琀椀氀 漀爀 猀漀洀攀 漀琀栀攀爀 伀匀 唀琀椀氀椀琀礀 琀漀  enable the EFIBoot in order to make this card bootable.਀ (2) EFIBoot Bios was enabled to configure the adapter and No Link:਀       EFIBoot will wait for 15 seconds/adapter to confirm a link.਀ (3) If two or more adapters have same EFIBoot driver version, EFIBoot will ਀      氀漀愀搀 漀渀氀礀 漀渀攀 搀爀椀瘀攀爀⸀ ਀  ⠀㐀⤀ 䤀昀 琀栀攀爀攀 愀爀攀 愀搀愀瀀琀攀爀猀 眀椀琀栀 搀椀昀昀攀爀攀渀琀 䔀䘀䤀䈀漀漀琀 搀爀椀瘀攀爀 瘀攀爀猀椀漀渀猀Ⰰ 䔀䘀䤀䈀漀漀琀  will load the highest version of the EFIBoot driver.਀ (5) In order to display Linkup speed, use the latest version of the firmware.਀ ਀⼀⨀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ⨀⼀ /* History */਀⼀⨀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ⨀⼀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀 匀椀渀挀攀 㐀⸀　　䄀　㨀 -----------------------------------------------------------------------------------਀⠀㄀⤀  䌀刀 ㈀㜀㜀㘀㐀  䄀搀搀 椀洀瀀爀漀瀀攀爀 䘀刀唀 昀漀爀洀愀琀 䌀䰀倀 眀漀爀欀愀爀漀甀渀搀 琀漀 䔀䘀䤀 戀漀漀琀 搀爀椀瘀攀爀       (2) CR 27765 Add support for processing netport 1 CLP strings ਀⠀㌀⤀  䌀刀 ㈀㜀㜀㘀㘀  䔀䘀䤀 䈀漀漀琀 搀爀椀瘀攀爀 洀甀猀琀 椀渀挀爀攀洀攀渀琀 琀栀攀 䌀䰀倀 䤀渀猀琀愀渀挀攀 瘀愀爀椀愀戀氀攀       (4) CR 27767 CLP processor should write all changed flash areas even if write errors encountered ਀⠀㔀⤀  䌀刀 ㈀㜀㜀㘀㠀  䌀漀爀爀攀挀琀 攀渀搀椀愀渀渀攀猀猀 椀猀猀甀攀 椀渀 䌀䰀倀 栀椀最栀 猀瀀攀攀搀 猀椀最渀愀氀椀渀最 瀀愀爀愀洀琀攀爀 吀䰀嘀 爀攀挀漀爀搀   ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀 匀椀渀挀攀 ㌀⸀㈀㄀䄀㔀㨀 -----------------------------------------------------------------------------------਀⠀㄀⤀  䌀刀 ㄀㜀㠀㈀㠀 䄀搀搀 䐀䴀吀䘀 䌀䰀倀 猀甀瀀瀀漀爀琀 琀漀 䔀䘀䤀 䈀漀漀琀 (2) CR 27051 EFI 3.21a5 menu doesn't display the EFI version correctly਀⠀㌀⤀  䌀刀 ㈀㜀㌀㐀㌀ 䄀搀搀 匀愀琀甀爀渀 㠀䜀䈀 䘀漀爀挀攀搀 䰀椀渀欀 匀瀀攀攀搀 愀渀搀 搀椀猀瀀氀愀礀 挀漀爀爀攀挀琀 倀䌀䤀攀 䰀愀渀攀 眀椀搀琀栀 ⠀洀愀砀⤀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀 匀椀渀挀攀 ㌀⸀㈀㄀䄀㐀㨀 -----------------------------------------------------------------------------------਀⠀㄀⤀  䌀刀 ㈀㘀㠀　㜀 䔀䘀䤀 䈀椀漀猀 ㌀⸀㈀㄀愀㐀 搀漀攀猀 渀漀琀 攀砀攀挀甀琀攀 䔀䘀䤀 䐀椀猀欀瀀愀爀琀 䌀氀攀愀渀 挀漀洀洀愀渀搀 挀漀爀爀攀挀琀氀礀 (2) CR 26655 EFI 3.21a4 can't flash f/w image into HBA when size is > 256KB.਀⠀㌀⤀  䌀刀 ㈀㘀㘀㈀㜀 䔀䘀䤀 ㌀⸀㈀㄀愀㐀 䐀椀愀最渀漀猀琀椀挀 䠀攀氀瀀 猀挀爀攀攀渀猀 挀漀渀琀愀椀渀 猀漀洀攀 琀礀瀀漀猀 (4) CR 24416 EFI 3.21a4 gets a corrupted menu screen after Boot Scan From EFIFCScanLevel is selected.਀ Problems Fixed Since 3.21A3:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ (1) CR 23832 LUN Blocksize is not acquired from capacity buffer correctly in GetMediaInfo ਀⠀㈀⤀  䌀刀 ㈀㌀㠀㜀㈀ 匀攀琀 匀攀爀瘀椀挀攀 䄀挀琀椀漀渀 椀渀 戀礀琀攀 ㄀ 漀昀 爀攀愀搀 挀愀瀀愀挀椀琀礀 ㄀㘀 䌀䐀䈀  (3) CR 24193 EFI Boot Code Reduction - Native ia64 code compile (sal64) of EFI Boot code has exceeded 256KB in size ਀⠀㐀⤀  䌀刀 ㈀㐀㄀㤀㐀 䔀䘀䤀 䈀漀漀琀 䌀漀搀攀 䘀氀愀猀栀 唀瀀搀愀琀攀 渀攀攀搀猀 愀 挀栀攀挀欀 昀漀爀 椀洀愀最攀猀 最爀攀愀琀攀爀 琀栀愀渀 ㈀㔀㘀䬀䈀  (5) CR 24240 Add 16 bytes as valid CDB length in passthru packet validation ਀⠀㘀⤀  䌀刀 ㈀㔀㌀㘀㜀 甀瀀搀愀琀攀 甀琀椀氀椀琀礀 戀愀琀挀栀 洀漀搀攀 洀攀渀甀 栀攀愀搀攀爀 渀攀攀搀猀 琀漀 愀挀挀漀甀渀琀 昀漀爀 戀爀愀渀搀攀搀 愀搀愀瀀琀攀爀猀  (7) CR 25848 Algorithm for unload older versions doesn't account for distribution type. ਀⠀㠀⤀  䌀刀 ㈀㔀㠀㔀㄀ 䌀栀愀渀最攀 漀瘀攀爀 琀漀 吀椀愀渀漀挀漀爀攀 ㄀⸀　㈀ 䔀䐀䬀 (9) CR 26277 Emulex diagnostic protocol producing unwanted debug output ਀⠀㄀　⤀ 䌀刀 ㈀㌀㔀㤀㄀ 䔀䘀䤀 ㌀⸀㈀　愀㈀ 搀椀猀瀀氀愀礀 眀爀漀渀最 搀攀瘀椀挀攀 挀愀瀀愀挀椀琀礀 眀⼀ ㄀⸀㘀吀䈀 䰀唀 挀漀渀渀攀挀琀攀搀⸀  (11) CR 26283 Integrated flash utility needs to use V3 EVPD program IDs਀⠀㄀㈀⤀ 䌀刀 ㈀㔀㠀㔀㘀 䄀搀搀 匀愀琀甀爀渀 匀甀瀀瀀漀爀琀     (13) CR 25766 Boot Path Not Found when attempting to boot HPUX from a VA7410 LUN ਀ Problems Fixed Since 3.21A2:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ (1) CR25063 - Remove debug output from 3.21A2਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀 匀椀渀挀攀 ㌀⸀㈀㄀䄀㄀㨀 -----------------------------------------------------------------------------------਀⠀㄀⤀  䌀刀㈀　㔀　㤀 ⴀ 䈀愀挀欀 漀甀琀 䌀刀㈀㐀㈀㐀㈀ (2) CR25061 - Auto delay discovery for FCAL topology with Lumens card if 1 alpa in loop map.਀ Problems Fixed Since 3.21A0:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ (1) CR24630 - Drive firmware update using customer utility appear to be failing਀⠀㈀⤀  䌀刀㈀㐀㘀㈀㤀 ⴀ 䄀瘀漀椀搀 甀猀椀渀最 昀甀渀挀琀椀漀渀 欀攀礀猀 椀渀 䔀䘀䤀 䈀漀漀琀 甀琀椀氀椀琀礀⸀ (3) CR24628 - EFI: Drop down to EFI shell, back to main menu => boot fails਀⠀㐀⤀  䌀刀㈀㐀㘀㈀㜀 ⴀ 䘀椀砀攀搀 爀攀瀀漀爀琀攀搀 椀猀猀甀攀 眀椀琀栀 昀氀愀猀栀椀渀最 匀䰀䤀㌀⸀倀刀䜀 昀椀氀攀猀 (5) CR24626 - Default behavior should be BIOS Enabled਀⠀㘀⤀  䌀刀㈀㐀㘀㈀㔀 ⴀ 䘀椀砀 椀猀猀甀攀 眀椀琀栀 搀椀猀瀀氀愀礀 漀昀 匀䰀䤀㌀ 昀眀 瘀攀爀猀椀漀渀 椀渀 椀渀昀漀 甀琀椀氀椀琀礀 (7) CR24277 - EFI 3.21a0 is unable to start EFI utility on certain HBA families ਀⠀㠀⤀  䌀刀㈀㐀㘀㄀㄀ ⴀ 䰀甀渀 挀漀渀琀爀漀氀 愀琀琀爀椀戀甀琀攀猀 瀀爀漀琀漀挀漀氀 瘀㐀 爀攀琀甀爀渀猀 眀爀漀渀最 瘀愀氀甀攀 昀漀爀 倀漀爀琀 䤀䐀 (9) CR24362 - EFI Boot info utility does not display SLI3 firmware on fw info screen਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀 匀椀渀挀攀 ㌀⸀㈀　䄀㌀㨀 -----------------------------------------------------------------------------------਀⠀㄀⤀  䌀刀㈀㌀㔀㜀㘀 ⴀ 䤀洀瀀氀攀洀攀渀琀 䰀唀一开䄀吀吀刀匀 瀀爀漀琀漀挀漀氀 瘀攀爀猀椀漀渀 ㌀ (2) CR23577 - LUN endianness in FC and SCSI device path node is incorrect਀⠀㌀⤀  䌀刀㈀㌀㔀㜀㠀 ⴀ 嘀倀䐀 搀愀琀愀 搀椀猀愀瀀瀀攀愀爀猀 愀昀琀攀爀 甀瀀搀愀琀攀 琀漀 䔀䘀䤀 ㌀⸀㈀　愀㈀ (4) CR23651 - Add support for VA field = Mfg. Data Code.਀⠀㔀⤀  䌀刀㈀㌀㔀㠀　 ⴀ 䤀渀挀漀爀爀攀挀琀 䰀椀渀欀 圀椀搀琀栀 猀栀漀眀渀 椀渀 嘀倀䐀 猀挀爀攀攀渀 (6) CR23581 - Add field to PCI-E adapter info for max lane width਀⠀㜀⤀  䌀刀㈀㐀　㤀㈀ ⴀ 䄀搀搀 猀甀瀀瀀漀爀琀 昀漀爀 嘀㘀 䔀嘀倀䐀 昀椀攀氀搀 琀漀 猀甀瀀瀀爀攀猀猀 䐀椀愀最渀漀猀琀椀挀猀 瀀爀漀琀漀挀漀氀 䜀唀䤀  (8) CR24241 - EFI Driver does not see storage on heterogeneous SAN with OpenVMS nodes.਀⠀㤀⤀  䌀刀㈀㐀㈀㐀㈀ ⴀ 䐀椀猀挀漀瘀攀爀礀 漀昀 嘀匀䄀 䰀唀一猀 漀渀 挀甀猀琀漀洀攀爀 刀䄀䤀䐀 挀漀渀琀爀漀氀氀攀爀 渀漀琀 挀漀渀猀椀猀琀攀渀琀⸀ (10) CR24243 - Hang of over 1 hour while enumerating VSA LUNs behind a switch਀⠀㄀㄀⤀ 䌀刀㈀㐀㈀㐀㐀 ⴀ 䌀栀愀渀最攀 嘀倀䐀 瀀爀漀琀漀挀漀氀 琀漀 爀攀琀甀爀渀 ㈀ 戀礀琀攀猀 漀昀 䄀匀䌀䤀䤀 搀愀琀愀 昀漀爀 嘀倀䐀 挀栀攀挀欀猀甀洀 昀椀攀氀搀 (12) CR24245 - Bump LUN_CTRL attributes protocol version to 4਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㈀　䄀㈀㨀 -----------------------------------------------------------------------------------਀ ⠀㄀⤀ 䌀刀 ㈀㈀　㈀㜀  䔀䘀䤀 椀渀琀攀爀渀愀氀 攀爀爀漀爀 眀栀攀渀 挀漀渀昀椀最甀爀攀搀 猀琀漀爀愀最攀 椀猀 搀椀猀挀漀渀渀攀挀琀攀搀⸀ ਀ Problems Fixed, Features added or Other Updates Since 3.20A1:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ (1) CR 21025 Add configuration save/restore feature to EFI Boot config utility਀ ⠀㈀⤀ 䌀刀 ㈀㄀㜀㔀㜀  䔀䘀䤀 唀琀椀氀椀琀礀 ㌀⸀㈀　愀　 吀漀瀀漀氀漀最礀 匀攀挀琀椀漀渀 攀渀栀愀渀挀攀洀攀渀琀猀 琀漀 戀攀 挀漀渀猀椀猀琀攀渀琀 眀椀琀栀 砀㠀㘀 䈀漀漀琀⸀ (3) CR 21947 Misleading user screen directions ਀ ⠀㐀⤀ 䌀刀 ㈀㌀㈀㌀㘀  䌀栀愀渀最攀搀 䔀䘀䤀开䘀䌀开䐀刀䤀嘀䔀刀开䤀䴀䄀䜀䔀开唀倀䐀䄀吀䔀开倀刀伀吀伀䌀伀䰀 瀀攀爀 䠀倀 匀䤀匀䰀 猀瀀攀挀椀昀椀挀愀琀椀漀渀  ਀ Problems Fixed, Features added or Other Updates Since 3.20A0:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ (1) CR 17383 HP-4GIG:EFI diagnostics utility required ਀ ⠀㈀⤀ 䌀刀 ㈀㄀㈀㠀㐀  䔀䘀䤀 甀琀椀氀椀琀礀 昀愀椀氀猀 琀漀 挀氀攀愀爀 猀挀爀攀攀渀 漀渀 攀砀椀琀 眀栀攀渀 椀渀瘀漀欀攀搀 眀⼀ 搀爀瘀挀昀最 ⴀ瘀       (3) CR 21755 EFI Utility 3.20a0 will generate an "Unexpcted Trap" if the Enter key is pressed on an un-Highlighted HBA ਀ ⠀㐀⤀ 䌀刀 ㈀㄀㤀㠀　  一攀攀搀 䌀氀愀爀椀昀椀挀愀琀椀漀渀 漀渀 琀栀攀 䈀愀琀挀栀 䴀漀搀攀 唀瀀搀愀琀攀 漀昀 䘀椀爀洀眀愀爀攀⸀ 䠀攀氀椀漀猀Ⰰ 吀栀漀爀 愀渀搀 倀攀最愀猀甀猀 搀椀猀瀀氀愀礀 瘀愀爀椀漀甀猀 爀攀猀甀氀琀猀⸀       (5) CR 22127 EFI VPD protocol firware version fields too short for 2 digit release counts. ਀ ⠀㘀⤀ 䌀刀 ㈀㈀㠀㐀㜀  䌀漀渀瘀攀爀琀 䔀渀栀愀渀挀攀搀 愀渀搀 䴀愀渀甀昀愀挀琀甀爀椀渀最 搀椀愀最渀漀猀琀椀挀猀 琀漀 爀攀琀甀爀渀 爀攀猀甀氀琀猀 椀渀 愀 戀甀昀昀攀爀⸀ (7) CR 21833 When using the key to exit DRVCFG -v command in EFI Utility 3.20a0 takes multiple attempts. ਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀㄀愀㔀㨀 -----------------------------------------------------------------------------------਀ (1) CR 14400 EFI 3.10a6 hangs if other initiators are discovered in ELX menu ਀ ⠀㈀⤀ 䌀刀 ㄀㔀㤀㠀㤀  䄀搀搀 猀甀瀀瀀漀爀琀 昀漀爀 㸀㈀吀䈀 䰀唀一       (3) CR 16956 Add feature to EFI boot and config utility for forcing link speed. ਀ ⠀㐀⤀ 䌀刀 ㄀㜀㌀㠀㔀  䄀搀搀 戀愀琀挀栀 洀漀搀攀 琀漀 昀氀愀猀栀 甀瀀搀愀琀攀 甀琀椀氀椀琀礀⸀      (5) CR 17386 Enhance EFI_SCSI_PASS_THRU_PROTOCOL GetNextDevice() function਀ ⠀㘀⤀ 䌀刀 ㄀㜀㌀㠀㜀  䔀渀栀愀渀挀攀 搀爀椀瘀攀爀 挀漀渀昀椀最甀爀愀琀椀漀渀 瀀爀漀琀漀挀漀氀       (7) CR 17388 Add EFI_DISK_IO protocol ਀ ⠀㠀⤀ 䌀刀 ㈀　㘀㠀㤀  䄀搀搀 猀甀瀀瀀漀爀琀 昀漀爀 昀氀愀猀栀椀渀最 匀䰀䤀㌀ 漀瘀攀爀氀愀礀猀  (9) CR 15965 Problem mixing 3.00A9 and 3.10a6 EFI Boot code during installation਀⠀㄀　⤀ 䌀刀 ㄀㠀㈀㌀㜀  䔀䘀䤀 ㌀⸀㄀㄀愀㔀 ⠀愀渀搀 攀愀爀氀椀攀爀⤀ 氀漀愀搀猀 洀甀氀琀椀瀀氀攀 䔀䘀䤀 搀爀椀瘀攀爀 瘀攀爀猀椀漀渀猀 挀漀渀挀甀爀爀攀渀琀氀礀 (11) CR 20725 Driver does LUN discovery by inquiry on RAID controllers਀⠀㄀㈀⤀ 䌀刀 ㄀㜀㘀㤀㘀  䔀䘀䤀 ㌀⸀㄀㄀愀㐀 挀栀愀渀最攀猀 琀栀攀 渀愀洀攀 漀昀 琀栀攀 䰀倀㄀㄀　　　 琀漀 䰀倀㄀㄀　　㈀  (13) CR 20859 Update copyright notices for display, and in source. ਀⠀㄀㐀⤀ 䌀刀 ㈀　㤀㐀㜀  䌀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀 洀攀渀甀 椀琀攀洀 洀椀猀猀瀀攀氀氀攀搀⸀   (15) CR 20963 Speed up screen update in EFIBoot configuration utility਀⠀㄀㘀⤀ 䌀刀 ㄀㜀㜀㤀　  䄀搀搀 猀甀瀀瀀漀爀琀 昀漀爀 伀䔀䴀 䈀爀愀渀搀攀搀 ㄀㄀　　㈀ 愀搀愀瀀琀攀爀猀    ਀ Problems Fixed, Features added or Other Updates Since 3.11a4:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀⠀㄀⤀ 䌀刀㄀㜀㤀㠀㤀 䤀渀琀攀最爀愀琀攀搀 昀氀愀猀栀 甀琀椀氀椀琀礀 搀漀攀猀 渀漀琀 猀甀瀀瀀漀爀琀 甀瀀搀愀琀攀 漀昀 伀䔀䴀 戀爀愀渀搀攀搀 䰀倀㄀㄀　　㈀ 愀渀搀 䰀倀攀㄀㄀　　㈀ 愀搀愀瀀琀攀爀猀 ਀⠀㈀⤀ 䌀刀㄀㠀　㈀㔀 䔀䘀䤀 䈀漀漀琀 甀琀椀氀椀琀礀 渀漀琀 爀攀愀搀椀渀最 嘀倀䐀 漀渀 䰀倀㄀㄀　　㈀  眀⼀ ㈀⸀㄀　䄀㜀 昀眀⸀ ਀⠀㌀⤀ 䌀刀㄀㔀㘀㐀㘀 䘀椀戀攀爀 挀栀愀渀渀攀氀 䔀䘀䤀 戀漀漀琀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 愀猀猀甀洀攀猀 愀 猀瀀攀挀椀昀椀挀 漀爀搀攀爀 漀昀 嘀倀䐀 昀椀攀氀搀猀 椀渀 一嘀刀䄀䴀  ਀ Problems Fixed, Features added or Other Updates Since 3.11a3:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀⠀㄀⤀ 䌀刀㄀㜀㌀㄀㔀 䤀渀琀攀最爀愀琀攀搀 昀氀愀猀栀 甀瀀搀愀琀攀 甀琀椀氀椀琀礀 甀渀愀戀氀攀 琀漀 昀氀愀猀栀 䰀倀㄀㄀㔀　 瀀愀椀爀攀搀 戀漀漀琀 昀椀爀洀眀愀爀攀 椀洀愀最攀⸀ ਀⠀㈀⤀ 䌀刀㄀㜀㌀㄀㘀 䔀䘀䤀 䈀漀漀琀 椀渀琀攀最爀愀琀攀搀 昀氀愀猀栀 甀琀椀氀椀琀礀 甀渀愀戀氀攀 琀漀 昀氀愀猀栀 ⸀愀氀氀 昀椀氀攀猀 昀漀爀 䠀攀氀椀漀猀 愀搀愀瀀琀攀爀猀 ਀⠀㌀⤀ 䌀刀㄀㜀㐀㄀㔀 䌀栀愀渀最攀 洀愀椀氀戀漀砀 琀椀洀攀漀甀琀猀 琀漀 ㌀　 猀攀挀漀渀搀猀 ਀⠀㐀⤀ 䌀刀㄀㜀　㠀㈀ 䄀搀搀 倀䌀䤀 猀攀最洀攀渀琀 琀漀 椀渀昀漀爀洀愀琀椀漀渀 搀椀猀瀀氀愀礀攀搀 戀礀 䔀䘀䤀 䈀漀漀琀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 ਀⠀㔀⤀ 䌀刀㄀㘀㘀㄀㐀 䘀椀戀攀爀 挀栀愀渀渀攀氀 䔀䘀䤀 戀漀漀琀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 搀漀攀猀 渀漀琀 搀椀猀瀀氀愀礀 倀䌀䤀 攀砀瀀爀攀猀猀 戀甀猀 猀瀀攀攀搀猀 挀漀爀爀攀挀琀氀礀 ⠀猀栀漀眀猀 ㌀㌀䴀栀稀⤀ ਀⠀㘀⤀ 䌀刀㄀㜀㐀㈀㈀ 愀搀搀 洀椀猀猀椀渀最 戀爀攀愀欀 椀渀 洀愀椀氀戀漀砀 挀漀搀攀 ਀⠀㜀⤀ 䌀刀㄀㜀㐀㔀㜀 䌀栀愀渀最攀 䔀䘀䤀 䈀漀漀琀 挀漀渀昀椀最 甀琀椀氀椀琀礀 愀搀愀瀀琀攀爀 渀愀洀攀 搀椀猀瀀氀愀礀 昀爀漀洀 ㄀㄀　　　䐀䌀 琀漀 ㄀㄀　　㈀ 昀漀爀 䠀攀氀椀攀漀猀 愀渀搀 娀攀瀀栀礀爀 搀甀愀氀 挀栀愀渀渀攀氀   ਀ Problems Fixed, Features added or Other Updates Since 3.11a2:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀⠀㄀⤀ 䌀刀㄀㔀㜀㘀㈀ 䌀愀渀渀漀琀 椀渀猀琀愀氀氀 眀椀渀搀漀眀猀 ㈀　　㌀ 椀渀 愀 匀䄀一 攀渀瘀椀爀漀渀洀攀渀琀⸀       ਀⠀㈀⤀ 䌀刀㄀㘀㄀㘀㐀  䄀搀搀 最攀渀攀爀椀挀 戀漀漀琀 挀漀搀攀 琀礀瀀攀 猀琀爀椀渀最 琀漀 䔀䘀䤀 戀漀漀琀 挀漀渀昀椀最 甀琀椀氀椀琀礀⸀       ਀⠀㌀⤀ 䌀刀㄀㘀㄀㘀㔀  刀攀洀漀瘀攀 戀礀琀攀 猀眀愀瀀 昀漀爀 䠀攀氀椀漀猀 愀渀搀 娀攀瀀栀礀爀 戀椀渀愀爀椀攀猀⸀       ਀⠀㐀⤀ 䌀刀㄀㘀㄀㘀㘀  䄀搀搀 戀漀漀琀 椀洀愀最攀 琀礀瀀攀 氀漀漀欀甀瀀 琀愀戀氀攀 攀渀琀爀椀攀猀 昀漀爀 渀攀眀 愀搀愀瀀琀攀爀猀⸀       ਀ Problems Fixed, Features added or Other Updates Since 3.11a1:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀  ⠀㄀⤀ 䴀漀爀攀 挀漀洀瀀爀攀栀攀渀猀椀瘀攀 猀漀氀甀琀椀漀渀 昀漀爀 搀攀氀愀礀 搀攀瘀椀挀攀 搀椀猀挀漀瘀攀爀礀 愀欀愀 䰀漀猀琀 䰀唀一 椀猀猀甀攀⸀  圀漀爀欀愀爀漀甀渀搀  now includes support for other devices on the loop with failing RAID controller. (CR15381) ਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀㄀愀　㨀 -----------------------------------------------------------------------------------਀ (1) Can't do flash update (CR-15527)਀ (2) Can't display the complete eVPD V2 HBA name (CR-15552) ਀ (3) Increase RATOV timeout (CR-15572) ਀ (4) Generic trap occurs on some systems when internal or external loopback test is invoked. (CR-15383)਀ (5) Improve instructions for setting max lun and discovery delay timer. (CR-15617) ਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀㘀㨀 -----------------------------------------------------------------------------------਀ (1) Added config utility menu item to delay device discovery by a user selectable ਀       渀甀洀戀攀爀 漀昀 猀攀挀漀渀搀猀⸀ ਀  ⠀㈀⤀ 䄀搀搀攀搀 椀渀琀攀爀渀愀氀 愀渀搀 攀砀琀攀爀渀愀氀 氀漀漀瀀戀愀挀欀 琀攀猀琀猀 琀漀 琀栀攀 搀爀椀瘀攀爀 搀椀愀最渀漀猀琀椀挀 瀀爀漀琀漀挀漀氀⸀ ਀  ⠀㌀⤀ 䄀搀搀攀搀 猀甀瀀瀀漀爀琀 昀漀爀 䠀攀氀椀漀猀Ⰰ 娀攀瀀礀爀Ⰰ 愀渀搀 ㌀爀搀 瀀愀爀琀礀 戀爀愀渀搀攀搀 倀䌀䤀 搀攀瘀椀挀攀 䤀䐀猀⸀ ਀  ⠀㐀⤀ 䄀搀搀攀搀 猀甀瀀瀀漀爀琀 昀漀爀 搀椀猀瀀氀愀礀椀渀最 嘀㄀ 愀渀搀 嘀㌀ 嘀倀䐀 昀椀攀氀搀猀 椀渀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀⸀ ਀  ⠀㔀⤀ 匀攀瘀攀爀愀氀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 琀攀砀琀 挀栀愀渀最攀猀Ⰰ 䤀䔀 挀漀瀀礀爀椀最栀琀 渀漀琀椀挀攀⸀    ऀऀऀऀऀऀऀऀऀऀ      ਀  ⠀㘀⤀ 䄀搀搀攀搀 搀椀猀挀漀瘀攀爀 搀攀氀愀礀 琀椀洀攀爀 琀漀 䔀䘀䤀 挀漀渀昀椀最甀爀愀琀椀漀渀 甀琀椀氀椀琀礀 愀猀 眀漀爀欀愀爀漀甀渀搀 昀漀爀 䰀漀猀琀 䰀唀一 椀猀猀甀攀  seens with RAID controller that fails to add devices to ALPA map on the first link reset. ਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀㔀㨀 -----------------------------------------------------------------------------------਀ (1) Fixed problem where EFI 3.10a5 did not support Arbitrary Loop. (CR-13725)਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀㐀㨀 -----------------------------------------------------------------------------------਀ (1) Fixed problem with Child Display in Diagnostics functions. (CR-13564)਀ (2) Changed "-e" and -"m" drvdiag levels to "not supported".਀ (3) Changed VPD version to "3".਀ (4) Removed "SAL" documentation from readme.txt.਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀㌀㨀 -----------------------------------------------------------------------------------਀ (1) Implemented Power-on self test Diagnostics function.਀ (2) Implemented Bus Interface Unit test (PCI Loopback) Diagnostics functions.਀ (3) Fixed problem with Hard-alpa Display string as per reqest. (CR-13492)਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀㈀㨀 -----------------------------------------------------------------------------------਀ (1) Implemented Diagnostics function.਀ (2) Fixed problem where the LUN scan sub-menu hangs EFI with a Clariion 4500 ਀       挀漀渀渀攀挀琀攀搀 琀漀 䴀挀䐀愀琀愀 䔀匀㌀　㄀㘀 眀椀琀栀 愀渀 䰀倀㤀㠀㈀⸀ ⠀䌀刀ⴀ㄀㌀㄀　㤀⤀ ਀  ⠀㌀⤀  䘀椀砀攀搀 瀀爀漀戀氀攀洀 琀栀愀琀 眀栀攀渀 䐀攀瘀椀挀攀 ⌀ 　㈀⸀ 眀愀猀 猀攀氀攀挀琀攀搀 漀渀 琀栀攀 戀漀漀琀 搀攀瘀椀挀攀 洀攀渀甀  (Device #01. on menu had no mapping), then Port driver 2.22a8/W2K3 could਀       昀椀渀搀 渀漀 栀愀爀搀 搀椀猀欀猀 搀甀爀椀渀最 伀匀 椀渀猀琀愀氀氀愀琀椀漀渀⸀ ⠀䌀刀ⴀ㄀㌀㄀㔀　⤀ ਀ Problems Fixed, Features added or Other Updates Since 3.10a1:਀ⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀⴀ ਀  ⠀㄀⤀  䘀椀砀攀搀 瀀爀漀戀氀攀洀 眀栀攀爀攀 甀渀愀戀氀攀 琀漀 戀漀漀琀 昀爀漀洀 倀漀爀琀 䐀爀椀瘀攀爀 眀椀琀栀 渀漀渀ⴀ稀攀爀漀 䰀唀一 琀愀爀最攀琀猀⸀  (CR-13112)਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀㄀　愀　㨀 -----------------------------------------------------------------------------------਀ (1) Fixed problem setting the topology to point-to-point, EFI driver login to ਀       愀 栀甀戀 愀渀搀 搀椀猀瀀氀愀礀 琀愀爀最攀琀猀⸀ ⠀䌀刀ⴀ㄀㈀㠀㘀　⤀ ਀  ⠀㈀⤀  䘀椀砀攀搀 倀爀漀戀氀攀洀 猀攀琀琀椀渀最 䈀漀漀琀 猀挀愀渀 琀漀 䐀椀猀挀漀瘀攀爀攀搀 吀愀爀最攀琀猀⸀  吀栀攀 䔀䘀䤀 搀爀椀瘀攀爀 眀愀猀  unable to create device path for non LUN-0 targets.਀ (3) Fixed problem with adding Scsi Error Commands properly.਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀　㄀愀　㨀 -----------------------------------------------------------------------------------਀ (1) Added support for all SCSI Commands.਀ (2) Implemented Scsipassthrough functions if the driver is called by an਀       攀砀琀攀爀渀愀氀 甀琀椀氀椀琀礀 琀栀愀琀 甀猀攀猀 匀挀猀椀瀀愀猀猀琀栀爀甀 昀甀渀挀琀椀漀渀猀⸀ ਀  ⠀㌀⤀  刀攀愀爀爀愀渀最攀搀 猀攀琀甀瀀 甀琀椀氀椀琀礀 漀瀀琀椀漀渀猀⸀ ਀  ⠀㐀⤀  䤀洀瀀氀攀洀攀渀琀攀搀 琀栀攀 猀甀瀀瀀漀爀琀攀搀 昀甀渀挀琀椀漀渀 漀昀 搀爀椀瘀攀爀 挀漀渀昀椀最甀爀愀琀椀漀渀 倀爀漀琀漀挀漀氀  check for the revision number of the driver before claiming support.਀ (5) EFIBoot Driver can boot all targets or specific targets selected with the ਀       匀攀琀甀瀀 唀琀椀氀椀琀礀⸀ 吀栀攀 一漀 䈀漀漀琀 猀攀氀攀挀琀椀漀渀 椀猀 愀氀猀漀 愀瘀愀椀氀愀戀氀攀 椀渀 琀栀攀 匀攀琀甀瀀 唀琀椀氀椀琀礀⸀ ਀  ⠀㘀⤀  䘀椀砀攀搀 瀀爀漀戀氀攀洀 眀椀琀栀 爀攀搀椀猀挀漀瘀攀爀椀渀最 琀愀爀最攀琀猀 愀渀搀 搀漀椀渀最 爀攀愀搀⼀眀爀椀琀攀 圀栀攀渀 琀栀攀 氀椀渀欀 went down after targets discovered and device path created.਀ (7) Added support for EFI Source Code version 1.10.14.62.਀ ਀倀爀漀戀氀攀洀猀 䘀椀砀攀搀Ⰰ 䘀攀愀琀甀爀攀猀 愀搀搀攀搀 漀爀 伀琀栀攀爀 唀瀀搀愀琀攀猀 匀椀渀挀攀 ㌀⸀　　愀㤀㨀 -----------------------------------------------------------------------------------਀ (1) Combined 3 EFI drivers to one.਀ (2) Added VPD Protocol.਀ (3) Controllers detected based on PCI Protocol.਀ (4) Boot Bios displayed with Enabled/Disabled Info in setup Utility.਀ (5) Boot Bios displayed with Universal/Pair/EFI Boot/ X86 Boot/Open Boot in ਀       䘀椀爀洀眀愀爀攀 唀瀀搀愀琀攀 唀琀椀氀椀琀礀⸀ ਀  ⠀㘀⤀  䄀搀搀攀搀 䰀甀渀䌀琀爀氀䄀琀琀爀猀 倀爀漀琀漀挀漀氀⸀ ਀ /*-------------------------------------------------------------------------------*/਀ 1. General descriptions:਀ 1. This version of EFIBoot is executed from Flash.਀ 2. This version can run configuration utility through "Drvcfg" shell command.਀ 3. This version can download Firmware through "Drvcfg" shell command and ਀      䘀椀爀洀眀愀爀攀 唀瀀搀愀琀攀 倀爀漀琀漀挀漀氀⸀ ਀   㐀⸀ 吀栀椀猀 瘀攀爀猀椀漀渀 挀愀渀 瘀攀爀椀昀礀 䌀漀渀昀椀最甀爀愀琀椀漀渀Ⰰ 䘀椀爀洀眀愀爀攀Ⰰ 嘀瀀搀Ⰰ 䌀漀渀琀爀漀氀氀攀爀 愀渀搀 吀愀爀最攀琀 Information through "Drvcfg" shell command.਀ 5. When EFIBoot is loaded in EFI Shell, Type "Drivers" to see whether਀      琀栀攀 搀爀椀瘀攀爀 椀猀 氀漀愀搀攀搀⸀ 䘀漀爀 攀砀愀洀瀀氀攀Ⰰ ਀      㔀⸀㄀⸀ 䤀昀 琀栀攀 䔀䘀䤀 搀爀椀瘀攀爀 瘀攀爀猀椀漀渀 ㌀⸀　㄀愀　 漀爀 愀戀漀瘀攀 琀栀攀渀 ਀          ㄀⸀ 一漀 吀愀爀最攀琀 愀琀琀愀挀栀攀搀Ⰰ  ਀      㠀㈀ 　　　㌀　㄀㄀　 䐀 堀 堀  ㄀  ⴀ 䔀洀甀氀攀砀 匀䌀匀䤀 倀愀猀猀 吀栀爀甀 䐀爀椀瘀攀爀        䔀氀砀挀氀椀㌀　㄀愀　 ਀          ㈀⸀ 圀椀琀栀 吀愀爀最攀琀猀 愀琀琀愀挀栀攀搀Ⰰ ਀      㠀㈀ 　　　㌀　㄀㄀　 䈀 堀 堀  ㄀  ㄀ 䔀洀甀氀攀砀 匀䌀匀䤀 倀愀猀猀 吀栀爀甀 䐀爀椀瘀攀爀        䔀氀砀挀氀椀㌀　㄀愀　 ਀           ⠀䄀⤀ 䔀䴀唀䰀䔀堀 匀䌀匀䤀 倀䄀匀匀吀䠀刀唀 䐀刀䤀嘀䔀刀㨀 吀栀椀猀 搀爀椀瘀攀爀 瀀爀漀搀甀挀攀猀 愀 匀䌀匀䤀 倀愀猀猀  through handle for each Emulex ਀                                            䄀搀愀瀀琀攀爀⸀ ਀ 2. Procedure to Install Operating System on a Fibre Channel Disk ਀ This is only for the system with floppy disk drive.਀ 2.1 Procedure to Install Windows Server 2003 on a Fibre Channel Disk.਀ (1) Boot with Windows Server 2003 Setup Media (See Microsoft Documentation ਀        䘀漀爀 䐀攀琀愀椀氀猀⤀ ਀    ⠀㈀⤀ 䴀漀渀椀琀漀爀 琀栀攀 眀栀椀琀攀 戀愀爀 漀渀 琀栀攀 戀漀琀琀漀洀 漀昀 琀栀攀 猀挀爀攀攀渀⸀  ਀    ⠀㌀⤀ 倀爀攀猀猀 嬀䘀㘀崀 眀椀琀栀椀渀 㔀 猀攀挀漀渀搀猀 眀栀攀渀 琀栀攀 ∀倀爀攀猀猀 䘀㘀 椀昀 礀漀甀 渀攀攀搀 琀漀 椀渀猀琀愀氀氀 愀  third party SCSI or RAID driver" message is displayed. ਀ (4) When the message "Setup could not determine the type of one or more mass਀        猀琀漀爀愀最攀 搀攀瘀椀挀攀猀 椀渀猀琀愀氀氀攀搀 椀渀 礀漀甀爀 猀礀猀琀攀洀Ⰰ 漀爀 礀漀甀 栀愀瘀攀 挀栀漀猀攀渀 琀漀 洀愀渀甀愀氀氀礀  specify an adapter." is displayed, insert the Emulex driver diskette.਀ (5) Follow the remaining instructions to complete the Windows Server 2003਀        椀渀猀琀愀氀氀愀琀椀漀渀⸀ ਀   一漀琀攀㨀 ਀   ㄀⸀ 䴀愀欀攀 猀甀爀攀 琀栀攀 甀猀攀爀 愀氀眀愀礀猀 甀猀攀猀 琀栀攀 氀愀琀攀猀琀 瘀攀爀猀椀漀渀 漀昀 䔀洀甀氀攀砀✀猀 圀椀渀搀漀眀猀  Server 2003 Port driver or Miniport driver.਀ 2. Create a GPT Partition if the user has more than one drive mapped as a boot ਀      搀攀瘀椀挀攀⸀ 吀栀椀猀 椀猀 愀瀀瀀氀椀挀愀戀氀攀 昀漀爀 愀氀氀 䠀愀爀搀 搀椀猀欀猀 ⠀䤀䐀䔀Ⰰ匀䌀匀䤀Ⰰ䘀椀戀爀攀Ⰰ攀琀挀⸀Ⰰ⤀ ਀   ㌀⸀ 䘀漀爀 倀漀爀琀 搀爀椀瘀攀爀猀Ⰰ 琀栀攀 甀猀攀爀 挀愀渀 猀攀氀攀挀琀 㠀 戀漀漀琀 搀攀瘀椀挀攀猀 琀栀爀漀甀最栀 琀栀攀  configuration utility, but the first drive will be available at installation.਀      䴀愀欀攀 猀甀爀攀 琀漀 猀攀氀攀挀琀 琀栀攀 挀漀爀爀攀挀琀 椀渀猀琀愀氀氀愀戀氀攀 搀爀椀瘀攀 愀猀 琀栀攀 昀椀爀猀琀 戀漀漀琀 搀爀椀瘀攀⸀  ਀㈀⸀㈀ 倀爀漀挀攀搀甀爀攀 琀漀 䤀渀猀琀愀氀氀 刀攀搀 䠀愀琀 䰀椀渀甀砀 漀渀 㘀㐀ⴀ戀椀琀 猀礀猀琀攀洀⸀ ਀    倀氀攀愀猀攀 昀漀氀氀漀眀 琀栀攀 椀渀猀琀爀甀挀琀椀漀渀猀 椀渀 琀栀椀猀 猀攀挀琀椀漀渀 椀昀 礀漀甀 眀愀渀琀 琀漀 椀渀猀琀愀氀氀 刀攀搀䠀愀琀  Linux Advanced Server onto a Fibre Channel boot disk attached to Emulex ਀    䰀椀最栀琀倀甀氀猀攀 䠀䈀䄀⸀ ਀    ⠀㄀⤀  䐀漀眀渀氀漀愀搀 琀栀攀 䐀爀椀瘀攀爀 䐀椀猀欀 椀洀愀最攀 昀椀氀攀 愀瀀瀀爀漀瀀爀椀愀琀攀 昀漀爀 礀漀甀爀 刀攀搀䠀愀琀  distribution. An example of this is: as21-ia64-6.00c.img.gz਀ (2) Uncompress the Driver Disk image file if necessary.਀        # unzip as21-ia64-6.00c.img.gz਀ (3) Insert a diskette into the diskette drive and copy the uncompressed Driver਀         䐀椀猀欀 椀洀愀最攀 昀椀氀攀 琀漀 搀椀猀欀攀琀琀攀⸀ ਀         ⌀ 搀搀 椀昀㴀愀猀㈀㄀ⴀ椀愀㘀㐀ⴀ㘀⸀　　挀⸀椀洀最 漀昀㴀⼀搀攀瘀⼀昀搀　 戀猀㴀㄀㐀㐀　欀 ਀    ⠀㐀⤀  䰀漀愀搀 刀攀搀 䠀愀琀 椀渀猀琀愀氀氀愀琀椀漀渀 䌀䐀ⴀ刀伀䴀 搀椀猀挀 ㄀ 椀渀 琀栀攀 琀愀爀最攀琀 洀愀挀栀椀渀攀 愀渀搀 戀漀漀琀 椀渀琀漀 the EFI shell.਀ (5) At the EFI prompt "Shell>", use the "map" command to list all devices and਀         昀椀氀攀 猀礀猀琀攀洀猀 琀栀愀琀 琀栀攀 猀礀猀琀攀洀 爀攀挀漀最渀椀稀攀猀⸀ ਀         匀栀攀氀氀㸀 洀愀瀀 ਀    ⠀㘀⤀  䤀渀 琀栀攀 漀甀琀瀀甀琀 漀昀 琀栀攀 ∀洀愀瀀∀ 挀漀洀洀愀渀搀Ⰰ 渀漀琀攀 琀栀攀 攀渀琀爀礀 挀漀爀爀攀猀瀀漀渀搀椀渀最 琀漀 琀栀攀 CD-ROM containing Red Hat installation CD-ROM disc 1. An example of this਀         椀猀㨀 昀猀㄀ ਀    ⠀㜀⤀  吀漀 挀栀愀渀最攀 琀漀 ∀昀猀㄀㨀∀ 昀椀氀攀 猀礀猀琀攀洀 琀礀瀀攀 ∀昀猀㄀㨀∀ 愀琀 琀栀攀 瀀爀漀洀瀀琀⸀ ਀         匀栀攀氀氀㸀 昀猀㄀㨀 ਀    ⠀㠀⤀  吀礀瀀攀 ∀攀氀椀氀漀 䰀椀渀甀砀 搀搀∀ 琀漀 戀漀漀琀 椀渀琀漀 琀栀攀 椀渀猀琀愀氀氀愀琀椀漀渀 瀀爀漀最爀愀洀⸀ ਀         昀猀㄀㸀 攀氀椀氀漀 䰀椀渀甀砀 搀搀 ਀    ⠀㤀⤀  匀攀氀攀挀琀 夀䔀匀Ⰰ 眀栀攀渀 礀漀甀 愀爀攀 瀀爀漀洀瀀琀攀搀㨀ऀ ਀         䐀漀 礀漀甀 栀愀瘀攀 愀 搀爀椀瘀攀爀 搀椀猀欀㼀 ਀    ⠀㄀　⤀ 夀漀甀 眀椀氀氀 琀栀攀渀 戀攀 瀀爀漀洀瀀琀攀搀㨀 䤀渀猀攀爀琀 礀漀甀爀 搀爀椀瘀攀爀 搀椀猀欀 愀渀搀 瀀爀攀猀猀 ﴀ濿欀ﴀ⃿琀漀  continue insert the driver disk and press ENTER਀ (11) Red Hat will print a message indicating it is loading the lpfc driver. User ਀         挀愀渀 琀栀攀渀 椀渀猀琀愀氀氀 刀攀搀䠀愀琀 昀漀氀氀漀眀椀渀最 琀栀攀 猀琀愀渀搀愀爀搀 椀渀猀琀愀氀氀愀琀椀漀渀 搀椀爀攀挀琀椀漀渀 昀爀漀洀  RedHat.਀ 3. EFIBoot Load Procedure਀ The Light Pulse EFIBoot is distributed as a .PRG file. This file may be downloaded਀琀漀 琀栀攀 䄀搀愀瀀琀攀爀 甀猀椀渀最 琀栀攀 昀椀爀洀眀愀爀攀 甀瀀最爀愀搀攀 瀀爀漀挀攀搀甀爀攀 眀椀琀栀 琀栀攀 昀漀氀氀漀眀椀渀最 唀琀椀氀椀琀礀 椀渀 Various systems. ਀ 1. "Drvcfg" : EFI based Systems. ਀ Please refer to section 5 for user interface how to download EFIBoot in EFI਀     戀愀猀攀搀 猀礀猀琀攀洀猀⸀ ਀  ㈀⸀ 䌀漀洀洀愀渀搀 䰀椀渀攀              㨀 䔀䘀䤀 戀愀猀攀搀 匀礀猀琀攀洀猀⸀ ਀     䰀漀愀搀 琀栀攀 䔀䘀䤀䈀漀漀琀 琀栀爀漀甀最栀 䌀漀洀洀愀渀搀 䰀椀渀攀Ⰰ ∀氀漀愀搀 攀氀砀挀氀椀㌀　㄀愀　⸀攀昀椀∀ 㰀䔀渀琀攀爀㸀⸀      ਀  ㌀⸀ 䰀倀㘀䐀唀吀䤀䰀⸀䔀堀䔀              㨀 䐀伀匀 戀愀猀攀搀 甀琀椀氀椀琀礀⸀ ਀     倀氀攀愀猀攀 爀攀昀攀爀 琀漀 琀栀攀 䰀倀㘀䐀唀吀䤀䰀 瘀攀爀猀椀漀渀 㤀⸀　愀㄀㌀Ⰰ 漀爀 氀愀琀攀爀Ⰰ 搀漀挀甀洀攀渀琀愀琀椀漀渀 昀漀爀 甀猀攀爀 interface how to download EFIBoot in DOS PCI systems.਀ 4. LPUTILNT : Windows Miniport Driver.਀ Please refer to the utility user manual for details on using the above tool.਀ 5. Emulex Configuration Tool : Windows Port Driver.਀ Please refer to the elxcfg user manual for details on using the above tool.਀ ਀㐀⸀ 䔀䘀䤀䈀漀漀琀 唀渀氀漀愀搀 倀爀漀挀攀搀甀爀攀⸀ ਀   ㄀⸀ 䤀昀 琀栀攀 䔀䘀䤀 搀爀椀瘀攀爀 瘀攀爀猀椀漀渀 ㌀⸀　㄀愀　 漀爀 愀戀漀瘀攀 琀栀攀渀 ਀      愀⸀ 吀礀瀀攀 ∀搀爀椀瘀攀爀猀∀ 㰀攀渀琀攀爀㸀⸀ after entering, Display will show the following, For example਀                  吀   䐀 D Y C I਀      刀           倀 䘀 䄀 V VERSION E G G #D #C DRIVER NAME IMAGE NAME਀      㴀㴀 㴀㴀㴀㴀㴀㴀㴀㴀 㴀 㴀 㴀 㴀㴀 㴀㴀 㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀 㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀㴀 82 00030110 D X X 1 - Emulex SCSI Pass Thru Driver Elxcli301a0਀ b. Write down the Emulex driver handle. For the above case, ਀        䔀洀甀氀攀砀 搀爀椀瘀攀爀 䠀愀渀搀氀攀 渀甀洀戀攀爀 椀猀 㠀㈀⸀ ਀      挀⸀ 吀礀瀀攀 ∀唀渀氀漀愀搀 㠀㈀∀ 㰀攀渀琀攀爀㸀⸀ ਀ 5. Procedure to run the Configuration tool with EFI Drivers.਀ Emulex EFI driver can be run with the "drvcfg" EFI Shell command. After seeing ਀   匀栀攀氀氀 倀爀漀洀瀀琀Ⰰ 䘀漀氀氀漀眀 琀栀攀 猀琀攀瀀猀⸀ ਀   ㄀⸀ 䜀攀琀 琀栀攀 氀愀琀攀猀琀 瘀攀爀猀椀漀渀 漀昀 䘀椀爀洀眀愀爀攀Ⰰ 戀愀猀攀搀 漀渀 戀漀愀爀搀 愀渀搀 琀礀瀀攀 漀昀 昀椀爀洀眀愀爀攀 昀椀氀攀猀 in case if you want to update firmware.਀ 2. If the card does not have EFI Driver 3.00a1 or above, please get the Command਀      䰀椀渀攀 搀爀椀瘀攀爀Ⰰ 攀氀砀挀氀椀⸀攀昀椀⸀ 䰀漀愀搀 琀栀攀 搀爀椀瘀攀爀 琀栀爀漀甀最栀 䌀漀洀洀愀渀搀 䰀椀渀攀  (load elxcli.efi).਀ 3. To display drvcfg options: type "drvcfg -?" .਀      吀栀椀猀 眀椀氀氀 栀攀氀瀀 栀漀眀 琀漀 甀猀攀 琀栀攀 瘀愀爀椀漀甀猀 漀瀀琀椀漀渀猀⸀ ਀   㐀⸀ 䐀攀琀攀爀洀椀渀攀 䔀洀甀氀攀砀 䔀䘀䤀 搀爀椀瘀攀爀 䠀愀渀搀氀攀 戀礀 琀礀瀀椀渀最Ⰰ ∀搀爀椀瘀攀爀猀∀ 㰀攀渀琀攀爀㸀⸀ 䴀愀欀攀 愀 渀漀琀攀 of the handle number for use later.਀ 5. To find the Controllers supported by the Emulex EFI driver, Type ਀      ∀搀爀瘀挀昀最 ∀ 㰀攀渀琀攀爀㸀⸀ 䐀椀猀瀀氀愀礀 眀椀氀氀 猀栀漀眀 琀栀攀 昀漀氀氀漀眀椀渀最Ⰰ 䘀漀爀 攀砀愀洀瀀氀攀Ⰰ ਀      昀猀　㨀尀䔀洀甀氀攀砀㸀 搀爀瘀挀昀最 Configurable Components ਀      䐀爀瘀嬀㈀㠀崀  䌀琀爀氀嬀㐀㄀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[18] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㄀㤀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[20] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㈀㄀崀  䰀愀渀最嬀攀渀最崀 Drv[4D] Ctrl[22] Lang[eng]਀      䐀爀瘀嬀㤀㄀崀  䌀琀爀氀嬀㈀㐀崀  䰀愀渀最嬀攀渀最崀 Drv[91] Ctrl[25] Lang[eng]਀       In this case 91 is the Driver handle and 24 and 25 are the controller handles.਀ 6. Type "drvcfg -s 91 24" to set controller options.਀       1. This will display the screen with all Emulex adapters.਀       2. Select the adapter you want to modify.਀       3. After selecting the Adapter, Next screen will allow the user to select਀         琀栀攀 昀甀渀挀琀椀漀渀猀 搀攀昀椀渀攀搀⸀  ਀         愀⸀ 匀攀琀甀瀀 唀琀椀氀椀琀礀   ⴀ 椀猀 甀猀攀搀 琀漀 挀漀渀昀椀最甀爀攀 琀栀攀 䄀搀愀瀀琀攀爀 瀀愀爀愀洀攀琀攀爀猀⸀ b. Firmware Update - is used to flash the Firmware, Bios, etc.,਀ 7. In order to update Firmware, select "Firmware Update", and follow the steps.਀ 1. Type "File directory Name" . If the file is root directory ਀         琀礀瀀攀 ∀尀∀ 㰀攀渀琀攀爀㸀⸀ ਀      ㈀⸀ 吀礀瀀攀 ∀䘀椀氀攀 一愀洀攀∀ 㰀攀渀琀攀爀㸀⸀ 圀愀椀琀 ⸀⸀⸀Ⰰ 唀琀椀氀椀琀礀 眀椀氀氀 瀀漀猀琀 匀甀挀挀攀猀猀⼀䔀爀爀漀爀  message. ਀ 3. After successful download, reset the system after completing the਀         ∀䐀爀瘀挀昀最∀ 甀琀椀氀椀琀礀 椀渀 漀爀搀攀爀 琀漀 甀猀攀 琀栀攀 渀攀眀 昀椀爀洀眀愀爀攀⸀ ਀   㠀⸀ 䤀渀 漀爀搀攀爀 琀漀 挀漀渀昀椀最甀爀攀 琀栀攀 䄀搀愀瀀琀攀爀 甀猀攀爀 猀栀攀氀氀 猀攀氀攀挀琀 ∀匀攀琀甀瀀 唀琀椀氀椀琀礀∀⸀ After selecting "Setup utility", the next screen will allow user to਀      搀漀 琀栀攀 昀漀氀氀漀眀椀渀最Ⰰ ਀         ㄀⸀ 䔀渀愀戀氀攀 漀爀 䐀椀猀愀戀氀攀 䈀䤀伀匀   ⴀ 椀猀 甀猀攀搀 琀漀 䔀渀愀戀氀攀 漀爀 䐀椀猀愀戀氀攀 琀栀攀 䔀䘀䤀䈀漀漀琀 to discover targets.਀         ㈀⸀ 䌀漀渀昀椀最甀爀攀 䠀䈀䄀 倀愀爀愀洀攀琀攀爀猀 ⴀ 椀猀 甀猀攀搀 琀漀 挀漀渀昀椀最甀爀攀 䠀䈀䄀 瀀愀爀愀洀攀琀攀爀猀⸀ 3. Configure Boot Parameters- is used to configure Boot Parameters.਀         㐀⸀ 刀攀猀攀琀 琀漀 䐀攀昀愀甀氀琀 嘀愀氀甀攀猀  ⴀ 椀猀 甀猀攀搀 琀漀 猀攀琀 琀栀攀 搀攀昀愀甀氀琀 瘀愀氀甀攀猀⸀ ਀   㤀⸀ 䤀渀 漀爀搀攀爀 琀漀 䌀漀渀昀椀最甀爀攀 䠀䈀䄀 倀愀爀愀洀攀琀攀爀猀 甀猀攀爀 猀栀攀氀氀 猀攀氀攀挀琀 ∀䌀漀渀昀椀最甀爀攀 䠀䈀䄀  Parameters". After selecting "Configure HBA Parameters", the next screen਀      眀椀氀氀 愀氀氀漀眀 甀猀攀爀 琀漀 搀漀 琀栀攀 昀漀氀氀漀眀椀渀最Ⰰ ਀      ㄀⸀ 䐀攀昀愀甀氀琀 䄀䰀倀䄀 漀昀 琀栀椀猀 愀搀愀瀀琀攀爀 ⴀ 椀猀 甀猀攀搀 琀漀 猀攀氀攀挀琀 栀愀爀搀 䄀氀愀瀀 漀昀 琀栀椀猀  Adapter.਀      ㈀⸀ 吀漀瀀漀氀漀最礀 匀攀氀攀挀琀椀漀渀           ⴀ 椀猀 甀猀攀搀 琀漀 猀攀氀攀挀琀 琀栀攀 吀漀瀀漀氀漀最礀⸀ 3. PLOGI Retry Timer - is used to select Port Login retry timer.਀    10. In order to Configure Boot Parameters user shell select "Configure Boot ਀      倀愀爀愀洀攀琀攀爀猀∀⸀ 䄀昀琀攀爀 猀攀氀攀挀琀椀渀最 ∀䌀漀渀昀椀最甀爀攀 䈀漀漀琀 倀愀爀愀洀攀琀攀爀猀∀Ⰰ 琀栀攀 渀攀砀琀 猀挀爀攀攀渀 will allow user to do the following,਀         1. Device Path Selection - is used to select Fibre or SCSI Boot Device ਀                                  瀀愀琀栀⸀ 2. Maximum Luns/Target - is used to Select Maximum Luns/Boot Target.਀      ㌀⸀ 䈀漀漀琀 吀愀爀最攀琀 匀挀愀渀       ⴀ 椀猀 甀猀攀搀 琀漀 匀攀氀攀挀琀 䈀漀漀琀 昀爀漀洀 一嘀刀䄀䴀 漀爀 愀氀氀  discovered targets or No target.਀      㐀⸀ 䌀漀渀昀椀最甀爀攀 䈀漀漀琀 䐀攀瘀椀挀攀猀 ⴀ 椀猀 甀猀攀搀 琀漀 挀漀渀昀椀最甀爀攀 甀瀀 琀漀 琀栀攀 㠀 戀漀漀琀 搀攀瘀椀挀攀猀⸀     ਀   一漀琀攀㨀  ਀   吀栀攀 䌀漀渀昀椀最甀爀愀琀椀漀渀 瀀爀漀琀漀挀漀氀 猀甀瀀瀀漀爀琀猀 琀栀攀 䔀渀最氀椀猀栀 氀愀渀最甀愀最攀 漀渀氀礀⸀ ਀ 6. Procedure to run Configuration tool to verify Adapter information with EFI ਀   䐀爀椀瘀攀爀猀⸀ ਀   䔀洀甀氀攀砀 䔀䘀䤀 搀爀椀瘀攀爀 挀愀渀 戀攀 爀甀渀 眀椀琀栀 琀栀攀 ∀搀爀瘀挀昀最∀ 䔀䘀䤀 匀栀攀氀氀 挀漀洀洀愀渀搀⸀ 䄀昀琀攀爀 猀攀攀椀渀最  Shell Prompt, Follow the steps.਀    1. To display drvcfg options: type "drvcfg -?" .਀      吀栀椀猀 眀椀氀氀 栀攀氀瀀 栀漀眀 琀漀 甀猀攀 琀栀攀 瘀愀爀椀漀甀猀 漀瀀琀椀漀渀猀⸀ ਀   ㈀⸀ 䐀攀琀攀爀洀椀渀攀 䔀洀甀氀攀砀 䔀䘀䤀 搀爀椀瘀攀爀 䠀愀渀搀氀攀 戀礀 琀礀瀀椀渀最Ⰰ ∀搀爀椀瘀攀爀猀∀ 㰀攀渀琀攀爀㸀⸀ 䴀愀欀攀 愀 渀漀琀攀 of the handle number for use later.਀ 3. To find the Controllers supported by the Emulex EFI driver, Type ਀      ∀搀爀瘀挀昀最 ∀ 㰀攀渀琀攀爀㸀⸀ 䐀椀猀瀀氀愀礀 眀椀氀氀 猀栀漀眀 琀栀攀 昀漀氀氀漀眀椀渀最Ⰰ 䘀漀爀 攀砀愀洀瀀氀攀Ⰰ ਀      昀猀　㨀尀䔀洀甀氀攀砀㸀 搀爀瘀挀昀最 Configurable Components ਀      䐀爀瘀嬀㈀㠀崀  䌀琀爀氀嬀㐀㄀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[18] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㄀㤀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[20] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㈀㄀崀  䰀愀渀最嬀攀渀最崀 Drv[4D] Ctrl[22] Lang[eng]਀      䐀爀瘀嬀㤀㄀崀  䌀琀爀氀嬀㈀㐀崀  䰀愀渀最嬀攀渀最崀 Drv[91] Ctrl[25] Lang[eng]਀       In this case 91 is the Driver handle and 24 and 25 are the controller handles.਀ 5. Type "drvcfg -v 91 24" to set controller options.਀ 1. This will display the screen with all Emulex adapters.਀       2. Select the adapter user wants to verify the information.਀       3. After selecting the Adapter, Next screen will allow the user to select਀         琀栀攀 昀甀渀挀琀椀漀渀猀 搀攀昀椀渀攀搀⸀  ਀         ㄀⸀ 䌀漀渀昀椀最   䤀渀昀漀 ⴀ 椀猀 甀猀攀搀 琀漀 搀椀猀瀀氀愀礀 琀栀攀 䄀搀愀瀀琀攀爀 䌀漀渀昀椀最甀爀愀琀椀漀渀 瀀愀爀愀洀攀琀攀爀猀⸀ 2. Firmware Info - is used to display the Adapter Firmware Information.਀         ㌀⸀ 嘀瀀搀      䤀渀昀漀 ⴀ 椀猀 甀猀攀搀 琀漀 搀椀猀瀀氀愀礀 琀栀攀 䄀搀愀瀀琀攀爀 嘀瀀搀 䤀渀昀漀爀洀愀琀椀漀渀⸀ 4. Ctrl Info - is used to display the Controller Information.਀         㔀⸀ 䐀攀瘀椀挀攀   䤀渀昀漀 ⴀ 椀猀 甀猀攀搀 琀漀 搀椀猀瀀氀愀礀 琀栀攀 䌀漀渀渀攀挀琀攀搀 琀愀爀最攀琀猀 䤀渀昀漀爀洀愀琀椀漀渀⸀ 6. Slim Info - is used to display the Connected targets Information for਀                            琀栀攀 倀漀爀琀 䐀爀椀瘀攀爀⸀ ਀ 7. Procedure to run the Diagnostics Protocol with EFI Driver.਀ Emulex EFI driver can now run with "drvdiag" EFI Shell command. After seeing਀   匀栀攀氀氀 倀爀漀洀瀀琀Ⰰ 䘀漀氀氀漀眀 琀栀攀 猀琀攀瀀猀 戀攀氀漀眀⸀ ਀   ㄀⸀ 吀漀 搀椀猀瀀氀愀礀 愀戀漀甀琀 甀猀愀最攀⸀ 吀礀瀀攀 ∀搀爀瘀搀椀愀最 ⴀ㼀∀ 㰀攀渀琀攀爀㸀⸀ 吀栀椀猀 眀椀氀氀 搀攀昀椀渀攀 栀漀眀  to use the various options.਀ 2. Determine Emulex EFI driver Handle by typing, "drivers" . Make a note਀      漀昀 琀栀攀 栀愀渀搀氀攀 渀甀洀戀攀爀 昀漀爀 甀猀攀 氀愀琀攀爀⸀ ਀   ㌀⸀ 吀漀 欀渀漀眀 琀栀攀 䌀漀渀琀爀漀氀氀攀爀 猀甀瀀瀀漀爀琀攀搀 戀礀 䔀洀甀氀攀砀 䔀䘀䤀 搀爀椀瘀攀爀Ⰰ 吀礀瀀攀  "Drvdiag" . Display will show the following, For example,਀ fs0:\Emulex> drvdiag -c਀      䄀瘀愀椀氀愀戀氀攀 䐀椀愀最渀漀猀琀椀挀猀 Drv[4A] Ctrl[18] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㄀㠀崀  䌀栀椀氀搀嬀㔀㔀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[18] Child[56] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㄀㤀崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[19] Child[57] Lang[eng]਀      䐀爀瘀嬀㐀䄀崀  䌀琀爀氀嬀㈀　崀  䰀愀渀最嬀攀渀最崀 Drv[4A] Ctrl[21] Lang[eng]਀      䐀爀瘀嬀㐀䐀崀  䌀琀爀氀嬀㈀㈀崀  䰀愀渀最嬀攀渀最崀 Drv[4D] Ctrl[22] Child[58] Lang[eng]਀      䐀爀瘀嬀㤀㄀崀  䌀琀爀氀嬀㈀㐀崀  䰀愀渀最嬀攀渀最崀 Drv[91] Ctrl[25] Lang[eng]਀ In this case 91 is the Driver handle and 24 and 25 are the controller handles.਀ 4. Type "drvdiag -s 91 24" to run Standard Diagnostics.਀    5. Type "drvdiag -e 91 24" to run Enhanced Diagnostics. Enahanced diagnostics ਀       瀀攀爀昀漀爀洀 愀渀 椀渀琀攀爀渀愀氀 氀漀漀瀀戀愀挀欀 琀攀猀琀⸀ ਀   㘀⸀ 吀礀瀀攀 ∀搀爀瘀搀椀愀最 ⴀ洀 㤀㄀ ㈀㐀∀ 㰀攀渀琀攀爀㸀 琀漀 爀甀渀 䴀愀渀甀昀愀挀琀甀爀椀渀最 䐀椀愀最渀漀猀琀椀挀猀⸀ 䴀愀渀甀昀愀挀琀甀爀椀渀最 搀椀愀最渀漀猀琀椀挀猀  perform an external loopback test. Note: A loopback connecter on each fibre channel port਀       椀猀 爀攀焀甀椀爀攀搀 昀漀爀 琀栀椀猀 琀攀猀琀⸀ ਀ ਀   一漀琀攀㨀  ਀   吀栀攀 䐀椀愀最渀漀猀琀椀挀猀 瀀爀漀琀漀挀漀氀 猀甀瀀瀀漀爀琀猀 琀栀攀 䔀渀最氀椀猀栀 氀愀渀最甀愀最攀 漀渀氀礀⸀