******************************************************************************* * README * ******************************************************************************* Licensed Materials - Property of IBM 5698-ISX (C) Copyright International Business Machines Corp. 1990, 2003. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure ******************************************************************************* * * -------------------------------- ATTENTION ---------------------------------- This is an interim fix (patch) level 5.2.6.1 It is intended to provide relief for critical problems where a local circumvention is unavailable. A limited amount of testing has been done to verify the fixes. Consequently, we strongly recommend that you perform additional testing before putting the package into a production environment. These fixes will be tested further by IBM Tivoli Storage Management and included in the next Maintenance / PTF Level. ----------------------------------------------------------------------------- * * ******************************************************************************* For online help visit the ITSM homepage at: www.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html ******************************************************************************* * Table of Content * ******************************************************************************* |===========================| | | | S=Server A=Storage Agent| | B=Both | |---------------------------| | P | | A H L M A S W | | I P N V S U I | | X X X S E N N | |-------------------------------------------------|---|---|---|---|---|---|---| | $$6 SHOW MEMUSE MaxQuickFree changes | | | | S | | | | |-------------------------------------------------|---|---|---|---|---|---|---| | $$5 IBM LTO WORM support | B | B | B | | | B | B | | $$5 SUN Storage Agent addtoinit documentation | | | | | | A | | | $$5 Q NODE F=D limitation | S | S | S | S | S | S | S | | $$5 Importing data to a Storage Pool with | | | | | | | | | Simultaneous Write Enabled. | S | S | S | S | S | S | S | |-------------------------------------------------|---|---|---|---|---|---|---| | $$4 Storage Agent in a MSCS cluster | | | | | | | A | | $$4 General support for LTO Generation 3 | S | S | S | | | S | S | |-------------------------------------------------|---|---|---|---|---|---|---| | $$3 Installation Notes - Linux | | | B | | | | | | $$3 Storage Agent Compatibility and Support | B | B | B | B | | B | B | | $$3 Microsoft Cluster Server (MSCS) | | | | | | | S | | $$3 3592 Support in a 3584 library. | B | B | B | | | B | B | | $$3 3592 WORM Support. | B | B | B | | | B | B | | $$3 3592 WORM Support on MVS | | | | S | | | | | $$3 3592 WORM Support known issues for 349X. | B | B | B | | | B | B | |-------------------------------------------------|---|---|---|---|---|-- |---| | $$2 Windows Logo Certifications | | | | | | | B | | $$2 Added library sharing compatibility | S | S | S | | | S | S | | $$2 Data Retention feature usage considerations | B | B | B | S | S | B | B | | $$2 AIX Quickstart clarifications | B | | | | | | | | $$2 TCPADMINPORT, TCPPORT and defaults | B | B | B | S | S | B | B | | $$2 SHOW LANFREE | S | S | S | S | | S | S | | $$2 Linux Support | | | B | | | | | | $$2 Audit Trail When Granting or Removing Access| S | S | S | S | S | S | S | | $$2 Requirements for the web administator in... | S | S | S | S | S | S | S | | $$2 The DRM PREPARE command does not exclude... | S | S | | | | S | S | | $$2 3592 Support for PASE | | | | | S | | | | $$2 Library Sharing and LAN-Free Upgrade | | | | | | | | | Considerations. | B | B | B | | | B | B | | $$2 Installation Notes - HPX | | B | | | | | | | $$2 Installation Notes - Linux | | | B | | | | | | $$2 Installation Notes - SUN | | | | | | B | | |-------------------------------------------------|---|---|---|---|---|-- |---| | $$1 AIX OS level correction to Quickstart manual| B | | | | | | | | $$1 Win Language Pack Installation Changes | | | | | | | S | | $$1 Admin Client Incorrect Server Level Display | B | B | B | B | B | B | B | |-------------------------------------------------|---|---|---|---|---|-- |---| | Last minute changes to Documentation ALL | B | B | B | B | B | B | B | | Installation Notes - AIX | B | | | | | | | | Installation Notes - MVS | | | | S | | | | | Installation Notes - PASE | | | | | S | | | | Installation Notes - WIN Server | | | | | | | S | | Installation Notes - WIN Storage Agent | | | | | | | A | |-------------------------------------------------|---|---|---|---|---|---|---| | Java GUI client warning message | S | S | S | S | S | S | S | | Cancel Process notes | S | S | S | S | S | S | S | | 64-Bit Windows 2003 notes | | | | | | | B | | 3494 library particulars/changes | S | S | S | | | S | S | | UTF8 TEC events | S | S | S | S | S | S | S | | LTO Generation 2 Support for PASE | | | | | S | | | | Unique TEC Events | S | S | S | S | S | S | S | | Summary Records Creation Functionality | B | B | B | S | S | B | B | | Summary Records Missing for Lan based | S | S | S | S | S | S | S | | Node DataWrite|ReadPath clarification | B | B | B | S | S | B | B | | QLogic 2300 support with Q SAN | | | | | | | B | | Windows SNIA License Agreement | | | | | | | B | | TAPEAlertmsg default value | B | B | B | | | B | B | | SUN DISK PERFORMANCE | | | | | | S | | | z/OS Reverse DNS Lookups | | | | S | | | | | ACSLS volume locking limitation | b | B | B | | | B | B | | Automatic Labeling of Tape Volumes | S | S | S | | | S | S | | Label Libvol Listing for Scsi Libraries | S | S | S | | | S | S | | LanFree particulars | B | B | B | S | | B | B | | NLS and Display Limitations | B | B | B | | S | B | B | | Simultaneous Write Limitations | S | S | S | S | S | S | S | | Simultaneous Write may not remove failing | | | | | | | | | copy storage pool. | S | S | S | S | S | S | S | | NDMP File-Level Restore support for | | | | | | | | | international characters | S | S | S | | | S | S | | IBM Devices 3570, 3590, and Ultrium: | | | | | | | | | Required Minimum Level for Device Drivers | B | B | B | | | B | B | | Concurrent NDMP Backups of EMC Celerra Data | | | | | | | | | Movers using fibre attached DLT drives | S | S | S | | | S | S | | Archive Utilities Provided | S | S | S | S | S | S | S | | APARs fixed in 5.2.0, and not in 5.1.7 | S | S | S | S | S | S | S | |-------------------------------------------------|---|---|---|---|---|-- |---| | APARs fixed in level 5.2.6.1 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.5.0 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.4.0 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.3.0 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.2.0 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.1.0 | B | B | B | S | S | B | B | | APARs fixed in level 5.2.0.0 | B | B | B | S | S | B | B | | Where to find Documentation | B | B | B | S | S | B | B | | Getting Help | B | B | B | S | S | B | B | | Trademarks | B | B | B | S | S | B | B | |-------------------------------------------------|---|---|---|---|---|-- |---| | | A H L M P S W | | | I P N V A U I | | | X X X S S N N | | | E | |=============================================================================| | | | FLG Legend | | $$1 = Changes made for Modification level 1 | | $$2 = Changes made for Modification level 2 | | $$3 = Changes made for Modification level 3 | | $$4 = Changes made for Modification level 4 | | $$5 = Changes made for Modification level 5 | | $$6 = Changes made for Modification level 6 | | | |-------------------------------------------------| ******************************************************************************** * $$6 SHOW MEMSUE MaxQuickFree changes * ******************************************************************************** The SHOW MEMUSE SET MAXQUICK command is no longer used to increase MaxQuickFree buffer space, rather the amount of MaxQuickFree space is now adjustable with a hidden server option SERVERHEAPPERCENT which starts with a default value of 15. This means the server will use approximately %15 of the specified REGION size to satisfy MaxQuickFree buffer requests. To examine whether SERVERHEAPPERCENT is adequately sized, issue SHOW HEAP to reveal whether the current heap for MaxQuickFree buffer space is large enough to accommodate existing MaxQuickFree memory requirements. Regularly scheduled SHOW HEAP commands will generate output to suggest increasing SERVERHEAPPERCENT (upto 50%) when required. ******************************************************************************** * $$5 IBM LTO WORM support. * ******************************************************************************** The TSM server now supports IBM LTO WORM devices and media in version 5.2.5. IBM LTO WORM devices are only available with generation 3 devices and media. In order to utilize LTO WORM, there needs to be an LTO WORM device class defined: DEFINE DEVCLASS LIBRARY= DEVTYPE=LTO WORM=YES TSM can only distinguish WORM media from rewritable media when the media is mounted. Therefore, all WORM media needs to either be checked in with CHECKLabel=Yes or labeled with the CHECKIN parameter specified. Any media that is checked in without mounting in the drive is considered rewritable. ******************************************************************************* *$$5 SUN Storage Agent addtoinit documentation * ******************************************************************************* The storage agent is configured to start automatically at the time of installation. An entry is made to the inittab that enables this automatic startup. The following scripts (located in the storage agent installation directory) allow you to modify the inittab: addtoinit (or addtoinit console) Adds an entry to the inittab that redirects output to /dev/console and enables automatic startup. For example: aa:234:once:/opt/tivoli/tsm/StorageAgent/bin/dsmsta.rc >/dev/console 2<>/dev/console addtoinit null Adds an entry to the inittab that redirects output to /dev/null and enables text based login to the console. For example: aa:234:once:/opt/tivoli/tsm/StorageAgent/bin/dsmsta.rc >/dev/null addtoinit saved Restores the inittab entry from /oldinit to /etc/inittab. If more than one entry exists in the /etc/inittab file, addtoinit saved restores the first entry only. removefrominit Removes any entry that refers to /dsmsta.rc and records these entries in a file called /oldinit. If more than one entry exists in the /etc/inittab file, removefrominit stores all entries in the oldinit file. ******************************************************************************* *$$5 Q NODE F=D limitation * ******************************************************************************* The Q NODES command with the FORMAT=DETAILED parameter displays some invalid information when the last operation for the node used multiple sessions. The values displayed as percentages for media wait, comm wait, and idle wait are not valid; they are the sum of the total time for each wait on all sessions, as a percentage of the duration. The duration displayed is for the last master session. If multiple master sessions occurred because the original master session ended after exceeding the idle wait time, being canceled, or ending for some other reason, the duration will only be for the time of the last session. The Q NODE duration, and media, comm, and idle wait percentages will not be accurate unless RESOURCEUTILIZATION 1 is used in the client options. To obtain accurate statistical information, use other sources such as accounting records, the records logged by client sessions, or the contents of the summary table available through SQL queries. This problem occurs on all platforms and all levels of the server. ******************************************************************************* *$$5 Importing data to a Storage Pool with Simultaneous Write Enabled * ******************************************************************************* Import operations do not honor the COPYCONTINUE=YES setting of primary storage pools. During an import operation, if an error occurs writing to a copy storage pool the current transaction will fail and the writing of the data to the primary storage pool will also fail. When this occurs the import process will stop. To complete the import operation, try the following: 1. Identify the reason for the failure in writing to the copy storage pool and attempt to resolve the problem, then retry the import operation. Or 2. Remove the failing copy pool from the primary storage pool's COPYSTGPOOLS list and retry the import operation. To remove one or more copy storage pools, Issue an UPDATE STGPOOL command which specifies only the copy pool names that you want to include in the updated list. For example, if the existing copy pool list includes COPY1 and COPY2 and you want to remove COPY1, specify COPYSTGPOOLS=COPY2 in the UPDATE STGPOOL command. To remove all existing copy storage pools associated with the primary storage pool, specify a null string, for example, COPYSTGPOOLS="". ******************************************************************************** * $$4 Storage Agent in a Micrsosoft Cluster Server (MSCS) * ******************************************************************************** The TSM server for the Windows platform has been enabled to work in a Microsoft Cluster Server (MSCS) environment. However, the TSM Storage Agent has not been enabled to work in a MSCS environment. For several reasons, TSM can not support the failover of a Storage Agent in a Microsoft Cluster Server (MSCS) environment. The largest problem is with tape devices during a clustered failover. TSM will support the Storage Agent on the individual nodes of a MSCS cluster, but not as cluster resource that can failover. Such a configuration is the same as in a non-clustered environment. The only difference is the client will have the clusternode option to pick up the cluster resources, but the Storage Agent doesn't care whether the client is backing up local or cluster resources. ******************************************************************************** * $$4 Support for LTO Generation 3 * ******************************************************************************** LTO generation 3 drives are supported with automated libraries such as SCSI and ACSLS. This support is available for TSM 5.2.4.0 and above including 5.3.0.0. Capacity: The new LTO3 drives and media have a capacity of 400GB per cartridge of uncompressed data and a capacity of 800GB per cartridge for compressed data. Device Class Information: In order to utilize this new hardware through TSM, keep in mind that this is still an LTO device. Thus, when defining a devclass that uses LTO3 drives, use the following: - devtype=LTO - format= NOTE: The ULTRIUM3 format is uncompressed and the ULTRIUM3C format is compressed. >>-DEFine DEVclass--device_class_name---------------------------> >--LIBRary--=--library_name--DEVType--=--LTO--------------------> .-FORMAT--=--DRIVE---------. >--+--------------------------+--+----------------------+-------> '-FORMAT--=--+-DRIVE-----+-' '-ESTCAPacity--=--size-' +-ULTRIUM---+ +-ULTRIUMC--+ +-ULTRIUM2--+ +-ULTRIUM2C-+ +-ULTRIUM3--+ '-ULTRIUM3C-' .-PREFIX--=--ADSM-------------------. >--+-----------------------------------+------------------------> '-PREFIX--=--+-ADSM---------------+-' '-tape_volume_prefix-' .-MOUNTRetention--=--60------. .-MOUNTWait--=--60------. >--+----------------------------+--+-----------------------+----> '-MOUNTRetention--=--minutes-' '-MOUNTWait--=--minutes-' .-MOUNTLimit--=--DRIVES-----. >--+---------------------------+------------------------------->< '-MOUNTLimit--=--+-DRIVES-+-' +-number-+ '-0------' Generational Compatibility: LTO3 drives are backwards read and write compatible with LTO Generation 2 media, but they are only backwards read compatible with LTO Generation 1 media. Thus, LTO3 drives can read and write to existing LTO2 media, but LTo3 drives need LTO1 media to be updated to READONLY. LTO1 volumes can be updated to READONLY by the following command: UPDATE VOLUME ACCESS=READONLY This restriction does not apply to LTO2 media, because LTO3 drives can both read and write to LTO2 media. ******************************************************************************** * $$3 Storage Agent Compatibility and Support * ******************************************************************************** The TSM support for storage agents has been modified. The server will support storage agents at the same version, release and the same modification level or modification level minus one (n-1) or modification level minus two (n-2). For example, a 5.2.3.0 server will support storage agents at the following levels: 5.2.3.0, 5.2.2.0 (this represents modification level minus one), and 5.2.1.0 (this represents modification level minus two). The server will reject sessions for storage agents from prior versions and those from prior releases. Similarly, the server will reject sessions from 5.2.0.0 storage agents. The server will also reject sessions from up level storage agents. An up level storage agent is a storage agent for a higher version, release, or modification level. For example, a 5.2.2.0 server will not support a 5.2.3.0 storage agent. To upgrade a server and one or more storage agents in a LAN-free configured TSM environment, the server should be upgraded first. After upgrading the server, the storage agents can be upgraded as time permits as long as it is still supported for this version of the server. If the storage agent is not one of the supported levels for this server, the storage agent will need to be upgraded in order to continue performing LAN-free data movement operations. The message ANR4745E will no longer be used to report incompatibility between storage agents and server. The server will issue message ANR4723E to report that a storage agent is down level relative to this server. Similarly, the server will issue message ANR4746E to report that a storage agent is up level relative to this server. ******************************************************************************** * $$3 Microsoft Cluster Server (MSCS) * ******************************************************************************** The TSM cluster DLLs require two Microsoft redistributables: mfc71u.dll and msvcr71.dll. If the Microsoft files do not already exist on your system (they are installed by VC71), they should be copied to the same directory as the TSM cluster DLLs. Once clustering has been configured, the versions of the tsmsvrrsc.dll and tsmsvrrscex.dll that are used by Microsoft Cluster Service (MSCS) are located in the Windows cluster directory on each node in the cluster that supports a TSM server. The two Microsoft redistributable DLLs should be copied to the same directory on each of these nodes. By default, the Windows cluster directory is the following. %SystemRoot%\Cluster By default, the TSM installation directory is the following. C:\program files\tivoli\tsm 1) In the console subdirectory of the TSM installation directory, locate the Microsoft redistributable DLLs Default: c:\program files\tivoli\tsm\console - mfc71u.dll - msvcr71.dll 2) Copy the DLLs to the Windows cluster directory When all nodes have been updated, start the TSM server from the cluster administrator. ******************************************************************************** * $$3 3592 Support in a 3584 library. * ******************************************************************************** 3592 Devices are now supported within a 3584 library. Thus, when a 3592 devType Device Class is defined it can be pointed at a SCSI library (LIBType=SCSI). NOTE: The HBA levels in your SAN environment need to be updated to the most up-to-date levels available; otherwise, WORM devices will fail. Likewise, the device driver, library, and drive microcode should be at appropriately up-to-date levels. These levels should be described in the hardware documentation. ******************************************************************************** * $$3 3592 WORM Support. * ******************************************************************************** In order to utilize 3592 WORM (Write Once, Read Many) support, the WORM parameter on the Device Class needs to be turned on (WORM=YES). This can only be done upon defining the Device Class. See ITSM 5.2.2 Admin Reference for more details. NOTE: the 5.2.2 documentation for WORM devices states that checklabel=yes is necessary for WORM devices on the CHECKIN command. This is not true for the 3592 WORM device in any library type. For 3584 libraries, this is all that needs to be done. The ITSM server will distinguish between WORM and non-WORM scratch cartridges. NOTE: The HBA levels in your SAN environment need to be updated to the most up-to-date levels available; otherwise, WORM devices will fail. Likewise, the device driver, library, and drive microcode should be at appropriately up-to-date levels. These levels should be described in the hardware documentation. For 349X libraries, there is a new parameter that needs to be set on the DEFINE LIBRARY command to utilize WORM support and allow the server to distinguish between WORM and non-WORM scratch cartridges: WORMSCRatchcategory. This category like SCRATCHCATegory and PRIVATECATegory needs to be distinct and cannot be shared with other applications or library objects. >>-DEFine LIBRary--library_name---------------------------------> .-LIBType--=--MANUAL-----------. >--+------------------------------+-----------------------------> '-LIBType--=--+-MANUAL-------+-' +-SCSI--| A |--+ +-349X--| B |--+ +-EXTernal-----+ '-ACSLS--| C |-' B (349X): |--+--------------------------------+---------------------------> '-WORMSCRatchcategory--=--number-' .-SCRATCHCATegory--=--301----. >--+----------------------------+-------------------------------> '-SCRATCHCATegory--=--number-' .-PRIVATECATegory--=--300----. >--+----------------------------+-------------------------------| '-PRIVATECATegory--=--number-' Additionally, the ability to update current 349X libraries that do not have a WORMSCRatchcategory defined was implemented. The only condition on this update is that it can only be done once when the WORMSCRatchcategory is not currently set. The new value cannot duplicate the already defined SCRATCHCategory and PRIVATECATegory parameters defined for the existing library. >>-UPDate LIBRary--library_name---------------------------------> |--+--------------------------------+---------------------------> '-WORMSCRatchcategory--=--number-' >--+--------------------+-------------------------------------->< '-SHAREd--=--+-No--+-' '-Yes-' As part of the 3592 WORM support, the message ANR8877E's user response has been updated to the following: If this is not a 3592 device or media, The volume was probably not checked in with the CHECKLABEL=YES parameter of the CHECKIN command. Check the volume out (the REMOVE=NO may be useful) and check the volume back into the library with this parameter to ensure that the mediatype is determined and saved. If this is a 3592 device or media, the volume probably has an incorrect barcode label indicating that it had the wrong WORM property. The label needs to be swapped for the opposite WORM type (e.g. WORM to non-WORM or non-WORM to WORM) or simply removed entirely from the library. ******************************************************************************** * $$3 3592 WORM Support known issues for 349X. * ******************************************************************************** There is one known issue that will be addressed in a future level. This issue only produces extraneous I/O errors when there are no WORM scratch volumes available. The following error messages are repeated several times before the operation failed (the sense data may not be exactly the same, but the KEY, ASC, ASCQ number should match the numbers below in message ANR8302E): ANR8301E I/O error on library WORM3494 (OP=004C6D31, SENSE=00.00.00.67). ANR8302E I/O error on drive DRVB (mt1.0.0.5) (OP=OFFL, Error Number=21, CC=0, KEY=02, ASC=3A, ASCQ=00, SENSE=70.00.02.00.00.00.00.58.00.00.00.00.3A.00.FF.0A.C9.0B.01.00.00.06.01.60.- 00.00.00.00.00.00.1B.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.- 00.00.00.00.00.00.00.00.00.00.00.01.27.00.00.00.00.00.00.00.00.00.34.42.38.20.- 20.20.20.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00, Description=An undetermined error has occurred). Refer to Appendix D in the 'Messages' manual for recommended action. ANR8945W Scratch volume mount failed . ANR1405W Scratch volume mount request denied - no scratch volume available. These error messages will be cleaned up in a future level, and only occur in this manner if the server is out of WORM scratch volumes. Thus, the number of scratch volumes in the WORMSCRatchcategory should be verified when this situation occurs. ******************************************************************************** * $$3 3592 WORM Support on MVS * ******************************************************************************** In order to utilize 3592 WORM (Write Once, Read Many) support, the WORM parameter on the Device Class needs to be turned on (WORM=YES). This can only be done upon defining the Device Class. -->> DEFine DEVclass--device_class_name-----------------------------> |--LIBRary=library_name--| |--WORM=No---| --DEVType =3592------------------ |--WORM=Yes--| |--WORM=No---| WORM Specifies whether the drive is a WORM (write once, read many) device. The parameter is optional. The default is NO. Yes Specifies that the device is a WORM device. No Specifies that the device is not a WORM device. NOTE: The Tivoli Storage Manager server does not automatically delete scratch volumes used in WORM storage pools after the volumes are emptied by expiration or other processes. To delete these volumes and remove them from WORM storage pools, you must use the DELETE VOLUME command. Tivoli Storage Manager cannot reuse WORM volumes that were written to by the server and then deleted from a storage pool. ******************************************************************************** * $$2 Windows Logo Certifications * ******************************************************************************** Certified for Microsoft Windows IBM Tivoli Storage Manager Server 5.2 has met the requirements for the following Windows certifications: Windows 2000 Server Windows 2000 Advanced Server Windows 2000 Datacenter Server Windows Server 2003, Standard Edition Windows Server 2003, Enterprise Edition Windows Server 2003, Datacenter Edition For more information please refer to: http://cert.veritest.com/CfWreports /server/SearchResults.asp?co=217&lo=0&bs=Search&pr=0&pc=0 ******************************************************************************** * $$2 The DRM PREPARE command does not exclude Centera primary storage pools. * ******************************************************************************** The DRM PREPARE command is used to generate recovery plan files. The recovery plan file contains commands to restore the TSM server from database and storage pool backup volumes. Since storage pool backup of Centera storage pools is not supported, the commands for Centera primary storage pools should not be included in the recovery plan file. Work around: - Use the SET DRMPRIMSTGPOOL command or the PRIMSTGPOOL parameter with the PREPARE command to specify the names of the primary storage pools that will be eligible for DRM PREPARE processing; do not include Centera storage pools. If a specified pool name contains a wildcard, ensure that the expanded name will not match the name of any Centera storage pool defined to the TSM server. or - If a Centera storage pool is included in the primary pool list when a PREPARE command is executed, update the recovery plan file that it generated. Delete or comment-out the commands for the Centera storage pool that may be included in the following stanzas: o PRIMARY.VOLUMES.DESTROYED o PRIMARY.VOLUMES.REPLACEMENT o STGPOOLS.RESTORE ******************************************************************************** * $$2 Added library sharing compatibility * ******************************************************************************** Version 5.2.2 Servers acting as a library manager are now backwards compatible with version 5.1 and 4.2 servers acting as a library client. Version 5.2.2 servers acting as library clients remain incompatible with version 5.1 and 4.2 servers acting as library managers. When upgrading multiple servers participating in library sharing to version 5.2, the servers acting as library managers must be upgraded first to maintain compatibility among the servers. ******************************************************************************** * $$2 Data Retention feature usage considerations * ******************************************************************************** o For IBM Tivoli Storage Manager, S/390 Edition The V5.2.2 PTF for Tivoli Storage Manager, S/390 Edition includes the ability to activate a new feature called Data Retention, which is not included in the base license for Tivoli Storage Manager, S/390 Edition IBM's plan is to make this a separately orderable and priced feature in 1Q2004 for all IBM Tivoli Storage Manager, S/390 Edition customers, so that it will be licensed separately as the Data Retention feature. Your use of the Data Retention components included with IBM Tivoli Storage Manager, S/390 Edition will be authorized only after you have acquired a separate license for the optional Data Retention feature. Specific license and ordering details will be provided in the announcements for this feature. o For IBM Tivoli Storage Manager Extended Edition The V5.2.2 PTF for Tivoli Storage Manager Extended Edition includes the ability to activate a new feature called Data Retention, which is not included in your license for Tivoli Storage Manager Extended Edition. IBM's plan is to make this a separately orderable and priced product in 1Q2004 for all IBM Tivoli Storage Manager Extended Edition customers, so that it will be licensed separately as IBM Tivoli Storage Manager for Data Retention. Your use of the IBM Tivoli Storage Manager for Data Retention components included with IBM Tivoli Storage Manager Extended Edition will be authorized only after you have acquired a separate license for IBM Tivoli Storage Manager for Data Retention. Specific license and ordering details will be provided in the product announcement. o For IBM Tivoli Storage Manager Extended Edition for z/OS and z/VM The V5.2.2 PTF for Tivoli Storage Manager Extended Edition for z/OS and z/VM includes the ability to activate a new feature called Data Retention (supported only on z/OS), which is not included in your license for Tivoli Storage Manager Extended Edition for z/OS and z/VM. IBM's plan is to make this a separately orderable and priced product in 1Q2004 for all IBM Tivoli Storage Manager Extended Edition for z/OS and z/VM customers, so that it will be licensed separately as IBM Tivoli Storage Manager for Data Retention for z/OS. Your use of the IBM Tivoli Storage Manager for Data Retention for z/OS components included with IBM Tivoli Storage Manager Extended Edition for z/OS and z/VM will be authorized only after you have acquired a separate license for IBM Tivoli Storage Manager for Data Retention for z/OS. Specific license and ordering details will be provided in the product announcement. ******************************************************************************** * $$2 AIX Quickstart clarifications * ******************************************************************************** o The paragraph "When installing a fileset, you might receive the following message: installp: APPLYING software for: ... The parameter list is too long. This problem occurs when filesets deliver a large list of files causing the buffer to overflow. To correct this problem, do the following: 1. Uninstall the fileset that caused the error message. 2. Apply AIX fix U472458 (available at http://techsupport.services.ibm.com/rs6000/fixes). 3. Reinstall the fileset." U472458 fixes IY10195 which only applies to AIX 4.3.3. Since TSM 5.2.0 and TSM 5.2.2 does not support AIX 4.3.3 as a server platform this section can be ignored. o The AIX Quick Start contains a table depicting the various HW Architecture, OS Kernel and TSM 5.2 Server supported combinations. To help clarify this, here is another view of these compinations *=========================================================================| * Hardware Architecture |32-bit| 64-bit | * AIX Kernel Mode |32-bit| 32-bit | 64-bit | * TSM 5.2 Server |32-bit|32-bit|64-bit|32-bit|64-bit| *-------------------------------------------------------------------------| * Basic Server | * Tivoli.tsm.server.com | Y | Y | Y | Y | Y | * Tivoli.tsm.server.rte | Y | Y | | Y | | * Tivoli.tsm.serveraix5.rte64 | | | Y | | Y | * Tivoli.tsm.msg.en_US.server | Y | Y | Y | Y | Y | * Tivoli.tsm.license.cert | Y | Y | Y | Y | Y | * Tivoli.tsm.license.rte | Y | Y | | Y | | * Tivoli.tsm.license.aix5.rte | | | Y | | Y | * Web Administration | * Tivoli.tsm.msg.en_US.webhelp | Y | Y | Y | Y | Y | * Tivoli.tsm.server.webadmins | Y | Y | Y | Y | Y | * SCSI or Fiber Channel Device Support | * Tivoli.tsm.devices.en_US.devices | Y | Y | Y | Y | Y | * Tivoli.tsm.devices.aix5 | Y | Y | Y | Y | Y | * ACS Library Support | * Tivoli.tsm.devices.acsls | Y | Y | Y | Y | Y | *=========================================================================| ******************************************************************************** * $$1 AIX OS level correction to Quickstart manual * ******************************************************************************** For IBM Tivoli Storage Manager v5r2 and later releases, AIX Operating System version 4 is not supported since it is scheduled to go out of service at the end of 2003. The Publications for IBM Tivoli Storage Manager v5r2 were frozen before the decision was made to not support AIX 4.3 with this release if the Storage Manager. We neglected to add this change to the "GA" README. ******************************************************************************** * $$1 Win Language Pack Installation Changes * ******************************************************************************** As part of the TSM 5.2.0 release, both the client and server moved all language support to separately installable language packages. This change has resulted in two issues with the Windows TSM 5.2.0 Server package. The TSM Server package does not include the language packages for the TSM 5.2.0 Client. The language packages are located on the TSM 5.2.0 Client CD. If you obtained the TSM Server package electronically, the complete TSM 5.2.0 Client package can be obtained from the same location and it contains the language packages. Installing a language package does not change the LANGUAGE option of any already existing TSM server instances. For example: If you have a server running in English and install the Japanese language package the server will continue to run in English. You must update the server's options file, stop and restart the server to have the serve run in Japanese. Any new server instance defined after the appropriate language package is installed should default to the correct language. ******************************************************************************** * $$1 Admin Client Incorrect Server Level Display * ******************************************************************************** The command line administrative client will not accurately report the current level of the storage agent or the server. An example of the version information displayed by the command line administrative client is: "Server Version 5, Release 2, Level 0.0" The display should actually be: "Server Version 5, Release 2, Level 1.0" To accurately display the server or storage agent level that the administrative client is connected to, issue the command "QUERY STATUS". The version information reported on the query is accurate. An example of the the version information displayed on this query is: "Storage Management Server for - Version 5, Release 2, Level 1.0" This display limitation will apply to the administrative client for future PTFs and patches for Version 5 Release 2 of the server or storage agent. This will be corrected at the next version or release of the product. ******************************************************************************** * $$2 3592 Support for PASE * ******************************************************************************** Support for 3592 drives is now included. Device Class Information: In order to utilize this new hardware through TSM, the devtype and format values need to be known. Thus, when defining a devclass that uses 3592 drives, use: - devtype=3592 - format= To issue this command, you must have system privilege or unrestricted storage privilege. Syntax >>-DEFine DEVclass--device_class_name---------------------------> >--LIBRary--=--library_name--DEVType--=--3592-------------------> .-FORMAT--=--DRIVE-------. >--+------------------------+--+----------------------+---------> '-FORMAT--=--+-DRIVE---+-' '-ESTCAPacity--=--size-' +-3592A1--+ .-PREFIX--=--ADSM-------------------. >--+-----------------------------------+------------------------> '-PREFIX--=--+-ADSM---------------+-' '-tape_volume_prefix-' .-MOUNTRetention--=--60------. .-MOUNTWait--=--60------. >--+----------------------------+--+-----------------------+----> '-MOUNTRetention--=--minutes-' '-MOUNTWait--=--minutes-' .-MOUNTLimit--=--1------. >--+-----------------------+----------------------------------->< '-MOUNTLimit--=--number-' Recording Format Select the recording format to be used when writing data to media. This parameter is optional. The default is Drive. Use the DRIVE value only when the device class has compatible sequential access devices. If you specify DRIVE for a device class that has incompatible sequential access devices, then you must mount volumes on devices that are capable of reading or writing at the format established when the volume was first mounted. This can cause delays if the only sequential access device that can access the volume is already in use. Note: If this format uses the tape drive hardware compression feature, depending on the effectiveness of compression, the actual capacity may be greater than the listed value. ******************************************************************************** * Installation Notes - ALL * ******************************************************************************** There are no clarifications or corrections for this section. ******************************************************************************** * Installation Notes - AIX * ******************************************************************************** Customers who own IBM 3570, 3590, or Ultrium tape libraries and/or drives: The minimum level Atape device driver must be installed BEFORE installing TSM 5.2. See the section of this readme entitled IBM Devices 3570, 3590, and Ultrium: Required Minimum Level for Device Drivers ******************************************************************************** * $$2 Installation Notes - HPX * ******************************************************************************** 1. The installation of the server now requires that the license terms be displayed and accepted by you. On some HP systems you will not be given the chance to accept those terms and the installation will fail with a "preinstall script error". If you examine the swagent.log file, it will state that the installation fails because the license is not accepted. To accept the license, you must run swinstall with -x ask=as_needed or use swask. If you are installing the server in the non-interactive mode (command-line), do one of the following: - Add the following statement to the sw defaults file (usually /var/adm/sw/defaults): swinstall.ask = as_needed - Add the -x option to the swinstall command line when you install the server. For example: swinstall -s /cdrom -x ask=as_needed TIVsmS64 If you wish to install the server with the interactive mode (GUI) of swinstall, you must run swask on the server package first. For example, run the following two commands to install the server: swask -s /cdrom TIVsmS64 swinstall -s /cdrom TIVsmS64 For more information about the files or settings mentioned, see HP documentation in the Software Distributor Administration Guide for HP-UX (available from HP's support web site) or see man pages. KNOWN RESTRICTION: After the server is installed the license is saved in text format, for all supported languages, in the tivoli/tsm/server/license directory. To view any of the license agreement files that are in a language other than English the appropriate codepage must be used. The license agreement files can be viewed in a web browser that supports the following character sets: Language WEB Browser Character Set ------------------- ----------------------------- Traditional Chinese Chinese Traditional ( Big 5 ) Simplified Chinese Chinese Simplified ( GB18030 ) Japanese Japanese ( Auto - Select ) Korean Korean German Western European ( ISO-8859-1 ) French Western European ( ISO-8859-1 ) Italian Western European ( ISO-8859-1 ) Brazilian Portuguese Western European ( ISO-8859-1 ) Spanish Western European ( ISO-8859-1 ) American English Western European ( ISO-8859-1 ) 2. Customers who own IBM 3570, 3590, or Ultrium tape libraries and/or drives: The minimum level ATDD device driver must be installed BEFORE installing TSM 5.2. See the section of this readme entitled IBM Devices 3570, 3590, and Ultrium: Required Minimum Level for Device Drivers 3. The following HP-UX patches MUST be installed before installing device driver. These patches may have been superceded by others by the time of your installation and it is the responsibility of the HP system administrator to insure that the current levels of OS software are installed. HP-UX 11i (aka 11.11): PHKL_27839 to correct kernel address space locking that causes applications to hang PHKL_29818 to correct system hang when running rmsf command against DLKM device drivers PHKL_29890 vPar enablement,DLKM load PHKL_30100 Psets,vPar,Xserver,T600 HPMC HP-UX 11 (aka 11.00): PHKL_27364 (replaced by PHKL_30190) 4. As of 5.2.2.0, the TSM Device Driver is dynamically linked into the kernel rather than statically linked. This means that a reboot to upgrade the driver is no longer neccessary once the 5.2.2.0 driver is installed. However, if you have a level with the static driver (5.2.1.x and all previous releases), it must be uninstalled before the dynamic driver (5.2.2.x and all subsequent relelases) can be installed. It cannot be simply upgraded. Because this is a new installation, the device special files (/dev/rmt/tsm*) must be recreated using the TSM device driver configuration script, tsmddcfg. Please see the published documentation for details on the use of this script. ******************************************************************************** * $$2 TCPADMINPORT, TCPPORT and defaults * ******************************************************************************** Note that TCPADMINPORT is a new server option for Tivoli Storage Manager 5.2 which defaults to the value 1500. It does NOT default to the same value as the TCPPORT option. If multiple servers are running on a system and one of those servers is using a TCPPORT value of 1500 and if the TCPADMINPORT option is not specified in all of the server option files, a conflict will occur on port 1500. Only the first server to be brought up will be able to use this port. Other servers will fail to communicate on port 1500. A change in the default value is being considered for a future release. This option also applies to storage agents. ******************************************************************************** * SHOW LANFREE * ******************************************************************************** The command SHOW LANFREE is available from the server. The syntax for this command is: SHOW LANFREE nodename stgagentname where nodename is the name of a client node stgagentname is the name of a storage agent The query will evaluate the destination storage pools for the domain to which this client node is assigned. The policy destination's are evaluated for BACKUP, ARCHIVE, and SPACEMANAGED operations for this node. When the query processing begins, the following message will be issued: "ANR0387I Evaluating node FRED using storage agent STA1 for LAN-free data movement." When the query processing completes, the following message will be issued summarizing the number of lanfree and non-lanfree destinations that were found: "ANR0388I Node FRED using storage agent STA1 has 2 storage pools capable of LAN-free data movement and 4 storage pools not capable of LAN-free data movement." This show command will display a table that reports whether or not a destination storage pool for a management class that this node can use is capable of LAN-free data movement. An example of the output is: Node Storage Operation Mgmt Class Destination LAN-Free Explanation Name Agent Name Name capable? ----- -------- --------- ---------- ------------ --------- -------------------- NODE1 STA1 BACKUP NOLF OUTPOOL No No available online paths. NODE1 STA1 BACKUP NOLF_SW PRIMARY No Destination storage pool is configured for simultaneous write. NODE1 STA1 BACKUP STANDARD SHRPOOL Yes NODE1 STA1 ARCHIVE NOLF OUTPOOL No No available online paths. NODE1 STA1 ARCHIVE NOLF_SW PRIMARY No Destination storage pool is configured for simultaneous write. NODE1 STA1 ARCHIVE STANDARD SHRPOOL Yes A few other messages may also be issued. The first is: "ANR0387W Node NODE1 has data path restrictions." This will be issued if this client node has their data read path or data write path set such that it would prevent LAN-free data movement. Also, if this command is issued from an administrative client, the server will also try to contact the storage agent using the "SERVER PING" command. If it is successfully able to contact the storage agent, the following message will be displayed: "ANR1706I Ping for server 'STA1' was able to establish a connection." And if the server did not successfully contact the storage agent, the following message will be displayed: "ANR1705W Ping for server 'STA1' was not able to establish a connection." ******************************************************************************** * $$2 Audit Trail When Granting or Removing Access to Another User's Data * ******************************************************************************** Many or our customers are required to meet various regulatory requirements for protecting data and need an audit trail of who has accessed and has been granted access to data. TSM now enables tracking of changes in data access through the client. When the SET ACCESS command completes, the following message will be issued in the server console and also in the server activity log: ANR4483I Node owner_node issued command: Set Access Backup \\machine_name\c$\FILES\file1.txt auth_node user_name. When the DELETE ACCESS command completes, the following message will be issued in the server console and also in the server activity log: ANR4484I Node owner_node issued command: Delete Access Backup \\machine_name\c$\FILES\file1.txt auth_node user_name. ******************************************************************************** * $$3 Installation Notes - Linux * ******************************************************************************** 1a) Install Instructions 1b) Accepting the License Terms 2a) Supported Linux Environments 2b) Supported Kernel Levels by ITSM SCSI Device Drivers 3) Notice for SLES7 users 4) RPM packages included 5) Features not supported on this release 1a) Install Instructions: ------------------------ The installation of the server requires that the license terms be accepted by user. The Server package won't install unless the license terms are accepted. If you already have IBM Tivoli Storage Manager Server, version 5.2.2.0 installed on your system, it may not be necessary to accept the license terms. Use the commands bunzip2 and tar to extract the rpm packages. For example: bunzip2 TIVsm-server-5.2.4-0.Linux.i686.tar.bz2 mkdir tsm cd tsm tar xvf ../TIVsm-server-5.2.4-0.Linux.i686.tar Execute the rpm command as follows: rpm -Uvh [ --prefix prefix] where prefix is optional, and it denotes the file system where you would like IBM Tivoli Storage Manager to be installed, and denotes one of the packages listed on session 4 below. If no prefix is given, the default install path is /opt. If you get the error "The TSM Server can not be installed unless the license terms have been agreed to" when installing the TIVsm-server package, execute section 1b) below. 1b) Accepting the License Terms Go to the directory where the TIVsm-server package was uncompressed and unpacked. Example: cd /tsm -Execute the script install_server. The syntax is: ./install_server [prefix] where prefix is optional, and it denotes the file system where you would like IBM Tivoli Storage Manager to be installed. If no prefix is given, the default is /opt. -From the following menu, select a number for the language that you prefer to display the license agreement. Press Enter. Software Licensing Agreement 1. Czech 2. English 3. French 4. German 5. Italian 6. Polish 7. Portuguese 8. Spanish 9. Turkish -The install_server script will display the license agreement in the language specified, and ask for you to accept them. To accept the license agreement, press 1 followed by the Enter key. - Once you have accepted the license agreement, a menu will be displayed with all the available RPM packages for the corresponding platform. At this point, you can either quit the install_server script by pressing 'q' followed by the Enter key, or, select packages from the menu to be installed. If you exit the menu, you can manually install any of the RPM packages that correspond to your architecture by using rpm. See section 1a) above. To install to a different location, use the --prefix option in rpm. Please refer to RedHat Package Manager documentation for details on rpm usage. If you chose to use the menu, Choosing the Basic(b) installation will install the server, the Web Administrative Interface, and the English command line help. If you're installing from a CD-ROM media, the Basic(b) selection will also install the license enabler. KNOWN RESTRICTION: After the server is installed the license is saved in text format, for all supported languages, in the tivoli/tsm/server/license directory. To view any of the license agreement files that are in a language other than English the appropriate codepage must be used. The license agreement files can be viewed in a web browser that supports the following character sets: Language WEB Browser Character Set ------------------- ----------------------------- Traditional Chinese Chinese Traditional ( Big 5 ) Simplified Chinese Chinese Simplified ( GB18030 ) Japanese Japanese ( Auto - Select ) Korean Korean German Western European ( ISO-8859-1 ) French Western European ( ISO-8859-1 ) Italian Western European ( ISO-8859-1 ) Brazilian Portuguese Western European ( ISO-8859-1 ) Spanish Western European ( ISO-8859-1 ) American English Western European ( ISO-8859-1 ) 2a) Supported Linux Environments ------------------------------- IA32 Architecture: ------------------ For supported Linux environments on the x86 architecture for TSM 5.2 please visit http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21107360 s390/s30x Architecture: ----------------------- For supported Linux environments on the zSeries architecture for TSM 5.2 please visit http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21108040 pSeries Architecture(ppc64): ---------------------------- For supported Linux environments on the pSeries architecture for TSM 5.2 please visit http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21108042 2b) Supported kernel levels by ITSM SCSI Device Drivers: For the latest support info on Linux kernel levels please visit http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21111628 NOTE: For a list of supported kernel levels on previous levels of ITSM Device Drivers, see the Linux support web page at http://www-1.ibm.com/support/docview.wss?rs=0&uid=swg21111628 4) RPM Packages included: ------------------------- IA32 ---- TIVsm-server-5.2.4-0.i386.rpm ...............TSM Server TIVsm-tsmscsi-5.2.4-0.i386.rpm ..............TSM SCSI OEM Device Drivers s390(31bit zSeries): ------------------- TIVsm-server-5.2.4-0.s390.rpm ...............TSM Server TIVsm-tsmscsi-5.2.4-0.s390.rpm ..............TSM SCSI OEM Device Driver s390x(64bit zSeries): -------------------- TIVsm-server-5.2.4-0.s390x.rpm ..............TSM Server TIVsm-tsmscsi-5.2.4-0.s390x.rpm .............TSM SCSI OEM Device Drivers ppc64(64bit pSeries): --------------------- TIVsm-server-5.2.4-0.ppc64.rpm ..............TSM Server TIVsm-tsmscsi-5.2.4-0.ppc64.rpm .............TSM SCSI OEM Device Drivers Architecture independent pkgs: ----------------------------- TIVsm-webadmin-5.2.4-0.noarch.rpm ...........TSM Server Web Admin Interface TIVsm-webhelpen_US-5.2.4-0.noarch.rpm .......TSM Help for Web Admin Interface 5) Features not supported on this release -------------------------------------- - Generic Tape - Shared Memory Protocol - Raw logical volume ******************************************************************************* * Installation Notes - MVS * ******************************************************************************** There are no clarifications or corrections for this section. ******************************************************************************** * Installation Notes - PASE * ******************************************************************************** CHECKIN LIBVOLUME ----------------- There is a known problem with the CHECKIN LIBVOLUME command. The CHECKIN LIBVOLUME of a tape containing EXPORT data fails when using an LTO library volume from a TSM server other than the OS/400 PASE server. TSM servers on platforms other than OS/400 PASE may place additional labels on a tape if the barcode of the tape cartridge contains more than 6 characters. The TSM OS/400 PASE server can not read these extra labels. You can avoid the problem by using server-to-server export. If you must use an LTO device to create the export tape, you can do the following. 1) Define a TSM library of type MANUAL 2) Define an LTO tape drive into the manual library 3) Label a tape with 6 or less characters 4) Perform the export. SERVER CONSOLE -------------- There are limitations with the PASE screen session being used on the iSeries as the TSM console. The visible screen width is only 77 columns. If TSM outputs strings that are longer than the screen width, PASE will wrap the output. The F11 function key permits a user to toggle the PASE screen session between wrap and truncate. However, there are no function keys that permit a user to view output that has been truncated by PASE. Some output may not be formatted properly. This is being caused by the fact that both the TSM server and PASE are breaking up the line. When the server computes the amount of space for a line, it uses a value that assumes that the font is monospaced (all characters are the same width). However, the actual output characters vary in width and the longer lines are being wrapped by the PASE screen session. TSM has attempted to eliminate the case in which both PASE and TSM perform line breaks. However, the issue could not be completely resolved. TSM could only reduced the cases in which occurred. If TSM makes the console width too small, there are problems outputting the results of QUERY commands when one or more of the column header strings is longer than the console width of the PASE screen session. The column header names in the output from a TSM QUERY command may not be formatted properly. When the server computes the amount of space for a line, it uses a value that assumes that the font is monospaced (all characters are the same width). However, the actual output of the characters may vary in width sometimes causing the output from QUERY commands to not appear to align correctly. Given the limitations of the PASE screen session, the TSM server can not generate output that can to be displayed properly in all cases. Therefore, the PASE screen session is not the recommended as the normal interface for the server and should only be used as the server console in a limited form. Instead, it is recommend that either the TSM WEB Administrative client or the TSM Command Line client be used as the interface to the TSM OS/400 PASE server. REQUIRED OS/400 V5R1 PTFs ------------------------- The following OS/400 V5R1 PTFs are required for TSM. SI04612 SI04626 SI03939 MF28967 SI01968 MF27490 MF27780 MF28208 Improving iSeries Disk Storage Pool Performance ----------------------------------------------- An enhancement was made for TSM in PASE for OS/400 V5R2, PTF MF30245. This enhancement allows greater write speed to disk storage pool volumes (i.e. backup performance.) With the above code the following OS/400 command must be run for all disk storage pool volumes. The command is: CHGATR OBJ('/path/stgpoolfile') ATR(*MAINSTGOPT) VALUE(*MINIMIZE) Prior to this PTF, OS/400 would read the portion of disk to be written to (due to the single level store architecture of OS/400) before the write, doubling the I/O required with a read that is not needed. DRIVESELECTION=OPERATOR ----------------------------------------------- If the device configuration file has "DRIVESELECTION=OPERATOR" for a library of type manual, a RESTORE DB fails. A message requesting a mount of a tape volume repeats until the resource timeout is reached, then a failure message is posted. This happens even though the required tape is mounted. Currently there is no way to reply that the volume is mounted. The error will occur on other stand alone server operations that make use of the device configuration. To avoid this problem, use "DRIVESELECTION=AUTOAMTIC" which is the default for the TSM DEFINE LIBRARY command. REQUIRED OS/400 V5R2 APARs -------------------------- Unable to load dsmlicense in OS/400 V5R2 PASE environment. A PASE APAR, SE10154 has been opened to address this issue. PASE is hung in microcode level of Operating system and cannot be ended even with the OS/400 ENDJOBABN command. Two OS/400 V5R2 APARs address this situation: APAR MA26821 OS/400 PASE JOB HANGS APAR MA26927 UNEXPECTED SIGSEGVS IN OS/400 PASE ******************************************************************************** * $$2 Installation Notes - SUN * ******************************************************************************** 1. The installation of the server now requires that the license terms be displayed and accepted by you. This is accomplished with a request sript in the server package. If you intend to run pkgadd in a interactive mode (GUI), run pkgask first and accept the license terms. KNOWN RESTRICTION: After the server is installed the license is saved in text format, for all supported languages, in the tivoli/tsm/server/license directory. To view any of the license agreement files that are in a language other than English the appropriate codepage must be used. The license agreement files can be viewed in a web browser that supports the following character sets: Language WEB Browser Character Set ------------------- ----------------------------- Traditional Chinese Chinese Traditional ( Big 5 ) Simplified Chinese Chinese Simplified ( GB18030 ) Japanese Japanese ( Auto - Select ) Korean Korean German Western European ( ISO-8859-1 ) French Western European ( ISO-8859-1 ) Italian Western European ( ISO-8859-1 ) Brazilian Portuguese Western European ( ISO-8859-1 ) Spanish Western European ( ISO-8859-1 ) American English Western European ( ISO-8859-1 ) 2. If the server package (TIVsmS) is installed before the Sun Language Support, and the locale is set to a non-english setting, these errors will be displayed: ANR0915E Unable to open language JA_JP for message formatting. Error opening catalog ./dsmja_jp.cat, for language ja_jp If the server package (TIVsmS) is installed before the Sun Server LICENSES, this warning will be displayed: ANR9613W Error loading /opt/tivoli/tsm/server/bin//./dsmreg64.sl for Licensing function: ld.so.1: ./dsmserv: fatal error: /opt/tivoli/tsm/server/bin//./dsmreg64.sl: open failure: No file nor directory exists. These messages can be ignored, the order the packages are installed does not affect the success of the install. 3. To users wishing to run the TSM Solaris server in a TSM supported language other than the default language, en_US: The LANGUAGE option in the server options file is not a valid option for the TSM Solaris server. If the LANGUAGE option is specified, it will be ignored by the server. The server trys to start the language specified in the system language environment variable. This environment variable can be specified by issuing from the system prompt, 'export LC_ALL=xx', where 'xx' is the locale. The server will run with the specified language if 1) The locale has been installed on the system. 2) The locale is supported by TSM. 3) The appropriate TSM Server language package has been installed. With V5.2.0, the description for using the LANGUAGE option in the sample file, 'dsmserv.opt.smp', is removed. The "Administrator's Reference" manual will be updated in a future release of the publication to also remove the LANGUAGE option description. Refer to the TSM Solaris Server "Quick Start" manual, Appendix 'C' for instructions of how to start the server in a language other than the server's default language. 4. Customers who own IBM 3570, 3590, or Ultrium tape libraries and/or drives: The minimum level IBMTape device driver must be installed BEFORE installing TSM 5.2. See the section of this readme entitled IBM Devices 3570, 3590, and Ultrium: Required Minimum Level for Device Drivers ******************************************************************************** * Installation Notes - WIN Server * ******************************************************************************** Storage Agent and Server Compatability -------------------------------------- Installation of the IBM Tivoli Storage Manager Server and Storage Agent on the same machine is not supported on the Windows platform. This restriction applies to all supported Microsoft operating systems. NLS Limitations --------------- Please see item #9,#10, #11, #12 in the section of this README called "NLS and Display Limitations". Minimum Level for Device Drivers -------------------------------- Customers who own IBM 3570, 3590, or Ultrium tape libraries and/or drives: The minimum level IBM device driver must be installed BEFORE installing TSM 5.2. See the section of this readme entitled IBM Devices 3570, 3590, and Ultrium: Required Minimum Level for Device Drivers How to Update the TSM Cluster Resource DLL ------------------------------------------- There is a copy of the Cluster Resource DLL (tsmsvrrsc.dll) in the console subdirectory of the TSM product. This version of the DLL will be updated by the installation on TSM maintenance. However, this is not the DLL that the Microsoft Cluster Server (MSCS) uses to manage the TSM cluster resource. The version of the tsmsvrrsc.dll that is used by MSCS is located in the Windows cluster directory on each node in the cluster that supports an TSM server. The new version of the DLL must be replaced on each on these nodes. 1) Stop all TSM servers 2) Copy the DLL from the TSM install directory file to the proper location. By default, the TSM install direcorty is the following. C:\Program Files\Tivoli\TSM\console By default, the Windows cluster directory is the following. %SystemRoot%\Cluster 3) Restart all TSM servers ******************************************************************************** * Installation Notes - WIN Storage Agent * ******************************************************************************** Storage Agent and Server Compatability -------------------------------------- Installation of the IBM Tivoli Storage Manager Server and Storage Agent on the same machine is not supported on the Windows platform. This restriction applies to all supported Microsoft operating systems. TSM Management Console ---------------------- The .msc file that controls the TSM Management Console has been updated as part of this release. In the prior version, the "Device Manager" snapin was not translated into the appropriate language. However, the new version of the .msc file is not automatically installed by the Windows Installer. Because the .msc is modified each time you invoke the TSM Management Console, the Windows Installer will not replace it. In addition, the file also contains information about storage agents and machines you have added. If you choose to use the updated .msc file, you must copy it from the product CD and then add again any storage agents and machines you had previously added to the earlier version of the console. ******************************************************************************** * Java GUI client warning message * ******************************************************************************** The following warning may appear on the server console each time an operation button is chosen on the Java GUI client. The Java GUI client will function correctly despite this message: " ANR0530W Transaction failed at node xxxxx (xxxxx) session x. Internal server error is detected" ******************************************************************************** * Cancel Process notes * ******************************************************************************** Cancelling a process with pending mount requests: Some processes, such as reclamation, will generate mount requests in order to complete processing. A mount request indicates that a volume is needed for the current process but the volume is not available in the library. The move media command, checkout libvolume, and manually removing the volume from the library are some of the ways to put a volume into this situation. The background process typically will not continue processing until the mount request has been resolved. If a process has a pending mount request, the process may not respond to a cancel process command until the mount request has been answered (replied) or cancelled. This is due to the process code waiting on a response from the volume repository, and the volume repository is waiting on a response from the administrator to the mount request. If a process does not respond to the cancel process command, it may be blocked as described above. Query Request will list the open requests. Querying the activity log will also help in determining if a given process has a pending mount request. The cancel process command will be handled only after the mount request has been answered by using either of the Reply or Cancel Request commands, or the mount request has timed out. In order to cancel a process with a pending mount request, it is recommended that the cancel process command is issued before the cancel request command. By issuing the cancel process first, a timing window is avoided where another mount request could be issued before the cancel process command is issued. ******************************************************************************** * $$2 64-Bit Windows 2003 notes * ******************************************************************************** The TSM server was ported from Windows 32-bit to Windows 64-bit to allow optimum performance in the Windows 64-bit environment. The TSM Storage Agent will remain a Windows 32-bit application. The 64-bit TSM server requires appropriate 64-bit hardware and the Windows 2003 64-bit operating system. Windows XP 64-bit is not supported. The TSM Management Console for Windows is a 32-bit only application. There is no 64-bit version of the management console. The 64-bit Windows IBM device drivers for 3570, 3590, or Ultrium tape libraries do not currently support a 32-bit application. Given this set of conditions, the Device Configuration and Media Labeling wizards of the management console can not be used with any tape library claimed by the IBM device driver on a 64-bit Windows system. The 64-bit TSM server is functionally identical to the 32-bit TSM server with the following exceptions: 1) ACSLS libraries are not supported. 2) The SNMP interface is not supported. 3) The Windows system functions, such as Device Manager, are not available with the 32-bit Console. Normal Windows system functions are still available using Windows "Manage Computer". 4) User written "Exit" DLL's must be 64-bit. A Windows 64-bit process cannot load a 32-bit DLL. ******************************************************************************** * 3494 library particulars/changes * ******************************************************************************** Support for the 3494 library has been altered to make the support more robust. The changes made affect how 3494 library objects should be defined and used. These changes, outlined below, should be transparent except to those with both 3490 and 3590 drives in their library. 1) 3494 library objects now only support one unique device type at a time. Therefore, if you have a 3494 library with both 3490 and 3590 drives, you need two library objects that have paths to the same physical library (same device parameter), but each with separate drives - one for 3490 drives, and one for 3590 drives. Each of these library objects need separate and distinct private and scratch categories - this is a necessity for scratch categories. These categories should not overlap with any other library on TSM and neither category should overlap with another application that is manipulating the 3494 library or the volumes in the library. For previously defined libraries this new distinction will not require any user intervention or changes to update the library objects that only contain 3590 or 3490 drives (not both). Library objects that do currently have 3490 and 3590 drives defined will need to follow steps to separate this object into two distinct library objects. These upgrade steps are described under upgrade procedures. 2) Because a library object will now only have one device type of drives, the devType parameter in both LABEL LIBVOL and CHECKIN LIBVOL commands is no longer necessary unless there are no drives defined in the library object. In this case, where no drives are defined, the devType parameter must be given or else the LABEL LIBVOL and CHECKIN LIBVOL commands will fail. The devType parameter can still be provided in all cases, it is just not needed when drives are defined in the library. 3) The scratch category for 3590 drives is now the scratch category provided when the library object is defined. It is no longer implicitly one greater than the 3490 scratch category (enabled by the ENABLE3590SUPPORT option). Thus, ENABLE3590SUPPORT is no longer needed in the options file, and this option is ignored. For previously defined libraries with 3590 drives that used this implicit scratch category, all queries on the library object will reflect the correct 3590 scratch category explicitly. Therefore, if you used the default 300 for private, 301 for 3490 scratch, and implicit 302 3590 scratch, then queries previously would show 301 as the library's scratch category. Now, 302 would be shown as the scratch category. UPGRADE PROCEDURE: ------------------ The following steps below describe the upgrade procedure when a defined library object from a previous release had both 3490 and 3590 drives defined. In this situation the current library object will be updated as your 3590 library object. The following additional steps by the user must be implemented to continue use of 3490 drives and volumes. Again, these steps need only be taken if your current library has both 3490 and 3590 drives. 1) Checkout all of your 3490 scratch volumes from the TSM library object. Now, 2) Delete all 3490 drives and 3490 drive paths pertaining to this library. 3) Define a new TSM library object which you will use for 3490 drives and volumes. Make sure this new library has a different scratch category and the SAME private category as your original library. If you want your new library to have a different private category as well you will have to repeat step 1 with your private 3490 volumes. 4) Redefine all of the 3490 drives and paths deleted in step 2 to your new library. 5) Checkin all of the 3490 scratch volumes previously checked out in step 1. 6) Checkin all of the 3490 private volumes. 7) Update your 3490 device class to point to the new library. ******************************************************************************** * UTF8 TEC events * ******************************************************************************** IC35676 -- TSM now sends UTF8 encoded events to TEC. Some patches for the Tivoli Enterprise Console (TEC) now require UTF8 encoded events to support some locales. Patch 0004 for TEC v3.6.2 is an example. TSM now supports the option to send UTF8 encoded events. To enable this option, add the following to the server options file (dsmserv.opt): TECUTF8event Yes This will enable the TSM server to encode the TEC event into UTF8 before issuing the event to the TEC server. Syntax: TECUTF8event Yes | No default: No Query OPTion will display whether or not this option is enabled. ******************************************************************************** * LTO Generation 2 Support for PASE * ******************************************************************************** TSM now includes support for the second generation of LTO hardware. This support was introduced at 5.1.7.0 and is supported by any level released later; however, any attempt to use LTO2 devices on a lower level than 5.1.7.0 is not supported. Capacity: The new drives have a media capacity of 200GB per cartridge of uncompressed data and a media capacity of 400GB per cartridge for compressed data. Device Class Information: In order to utilize this new hardware through TSM, keep in mind that this is still an LTO device. Thus, when defining a devclass that uses LTO2 drives, use: - devtype=LTO - format= NOTE: The ULTRIUM2 format is uncompressed. If this format uses the tape drive hardware compression feature, depending on the effectiveness of compression, the actual capacity may be greater than 200GB. >>-DEFine DEVclass--device_class_name---------------------------> >--LIBRary--=--library_name--DEVType--=--LTO--------------------> .-FORMAT--=--DRIVE---------. >--+--------------------------+--+----------------------+-------> '-FORMAT--=--+-DRIVE-----+-' '-ESTCAPacity--=--size-' +-ULTRIUM---+ '-ULTRIUM2--' .-PREFIX--=--ADSM-------------------. >--+-----------------------------------+------------------------> '-PREFIX--=--+-ADSM---------------+-' '-tape_volume_prefix-' .-MOUNTRetention--=--60------. .-MOUNTWait--=--60------. >--+----------------------------+--+-----------------------+----> '-MOUNTRetention--=--minutes-' '-MOUNTWait--=--minutes-' .-MOUNTLimit--=----1--------. >--+---------------------------+------------------------------->< '-MOUNTLimit--=--+-number-+-' Upgrading from LTO to LTO2 devices: When migrating from LTO to LTO2 devices, you need to follow one of the set of steps below: - If you are maintaining both generations simultaneously, LTO gen1 and LTO gen2, then you need to logically partition your library such that the drives of these two generations are disjoint. - If you are upgrading all your drives to LTO gen2, then 1. Delete all your old LTO gen1 drive definitions as well as any paths associated with these old drive definitions. 2. Define the new LTO2 drives and paths associated with the new hardware. NOTE: LTO gen2 drives are backwards read compatible as well as backwards write compatible. Therefore, you do NOT need to mark your LTO gen1 media as "read only". ******************************************************************************** * Unique TEC Events * ******************************************************************************** Two server options have been added to control the format of events sent from Tivoli Storage Manager (TSM) to the Tivoli Enterprise Console (TEC). UNIQUETECevents YES | NO -and- UNIQUETDPtecevents YES | NO The default setting for both options is "NO" Setting UNIQUETDPtecevents to YES will dynamically set UNIQUETECevents to YES. The server options file will not be updated to reflect this change, though. Enabling either option changes the event class format for events sent to the TEC by the TSM server. By enabling either option, a unique event class will be generated for each individual TSM message. This includes client and TDP agent messages in addition to the server messages. Enabling one or both of these options may facilitate rule evaluation performance on the TEC server. Enabling one or both of these options may also incur a performance penalty during event reception on the TEC server. Different customers have encountered differing results, so evaluation of end effects on your environment will be required. Not all customers will realize benefit from enabling either of these two new options. Unique events will have an event class format of: TSM_SERVER_ANR#### TSM_CLIENT_ANE#### TSM_TDP_DOMINO_ACD#### etc... where #### represents the message number if the UNIQUETDPtecevents option is enabled, the following TDP agents will have unique events generated for their messages logged to the TSM Server as follows: TSM_TDP_SAP_R3_BKI#### (also covers TDP for ESS for SAP R3 messages) TSM_TDP_ESS_DB2_EEP#### TSM_TDP_ESS_ORACLE_EEO#### Please examine the appropriate BAROC file for exact details of the event class format. TDP Agents may issues unique events in the following ranges: Note - all events follow the IBM3.4 naming convention of a three character prefix followed by four digits. EXCHANGE -- ACN3500 -> ACN3649 DOMINO -- ACD5200 -> ACD5299 SQL -- ACO3000 -> ACO3999 ORACLE -- ANS0500 -> ACO0599 INFORMIX -- ANS0600 -> ANS0699 if UNIQUETDPtecevents is enabled: SAP R3 -- BKI0000 -> BKI9999 (also includes ESS for SAP R3 messages) ESS DB2 -- EEP0000 -> EEP9999 ESS ORACLE -- EEO0000 -> EEO0000 Again, please note that enabling UNIQUETDPtecevents will also enable UNIQUETECevents, and all recognized TDP messages will be sent as unique events from the TSM Server. The TEC administrator must create a rule base using the appropriate BAROC file for the option(s) selected on the TSM Server. * If neither of these options are selected, or are set to "NO" use the ibmtsm.baroc file. * If only the UNIQUETECevents option is set to "YES" use the itsmuniq.baroc file. * If the UNIQUETDPtecevents option is set to "YES" use the itsmdpex.baroc file. Each successive baroc file accepts the events of the previous baroc file. In other words, "itsmuniq" accepts all events in "ibmtsm". "itsmdpex" accepts all events contained in "itsmuniq". Note for MVS users: itsmuniq.baroc and itsmdpex.baroc are listed as ANRBARUN and ANRBARDP in the SAMPLIB. ******************************************************************************** * Summary Records Creation Functionality * ******************************************************************************** When using the lan based TSM Backup/Archive client, one summary record is created for each client operation (Backup/Restore/Archive/Retrieve). For example, if a backup operation uses multiple sessions to accomplish the backup, only one record is created. When using TDP or an API client, one record is created for each session that moves data. For example, if a backup via a TDP has 3 sessions, 3 records are created. When data is backed up via the LAN-free mechanism, (either via the TSM Backup/Archive client or a TDP or API client) one record is created for each session that moves data. In this example, if a LAN-free backup had 3 sessions, 3 records would be created. ******************************************************************************** * Summary Records Missing for Lan based TSM Backup-Archive Client Sessions * ******************************************************************************** TSM Summary table problems are corrected with the application of fixes for Server: APAR IC35693 (4.2.3.4 or 5.1.6.3) and Client APAR IC34693. Both must be applied to resolve existing issues with Summary Table processing. Notes: Client events must be enabled to the Activity log or Console receivers for Lan based TSM Backup/Archive clients to generate Activity.Summary table records. By default, events are enabled and will only be disabled if actions have been taken to disable events. This is unique to Lan based TSM Backup/Archive clients only. TDP, API and Lan-free client processing is not activated by the client events. To verify if events are enabled for a client node, issue the following query command on the TSM server: query enabled actlog node= or query enabled console node= To enable events for a client node, issue the following command on the TSM server: enable events actlog all node= or enable events console all node= Apar IC35693 provides additional tracing capability for Summary Table processing and tracing should be enabled if problems are encountered with summary tables. In order to collect the enhanced diagnostic data, tracing should be enabled with trace classes 'systime session txn accnt' during the entire timeframe the problem node is executing an operation (Backup/Restore/Archive/Retrieve). ******************************************************************************** * Node DataWrite|ReadPath clarification * ******************************************************************************** Two parameters have been added to node definitions to control data operations. DATAWritepath= default: ANY DATAReadpath= default: ANY These two parameters control whether data is allowed to be written or read by a node for a specific data path. "ANY" will allow any type of data movement to occur for the node. 'Any' is is the default behavior. "LAN" restricts data flow to the classic LAN path only. "LANFree" restricts data flow to LanFree operations. "SERVerfree" restricts data flow to either LAN or ServerFree operations. For example, setting a Node's DATAWritepath to "LAN" and DATAReadpath to "ANY" will only allow LAN store operations, but will allow any type of operation for a read. These parameters are part of the Register Node & Udate Node commands. A Query Node format=detailed command will show the current values for the parameters. ******************************************************************************** * QLogic 2300 support with Q SAN * ******************************************************************************** The QLogic 2300 is now supported with the Query SAN command, the San Device Mapping feature, and with the Server-Free function all on Windows. ******************************************************************************** * Windows SNIA License Agreement * ******************************************************************************** THIRD PARTY LICENSE TERMS AND CONDITIONS, NOTICES AND INFORMATION The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version. All third party components, including third party components included or embedded in the product, are provided to you by IBM on an "AS-IS" basis. IBM expressly disclaims all implied warranties, including the implied warranties of merchantability, fitness for a particular purpose and non-infringement. IBM will not indemnify you or be liable for any incidental, indirect, special, exemplary, punitive or consequential damages resulting from third-party claims alleging patent or copyright infringement by any third party components; including but not limited to costs, damages, attorney's fees, costs of court, settlement fees, judgments, lost profits and related damages. ==================================================================== SNIA HBA API IMPLEMENTATION: The HBAAPI.dll file in the Program's installation directory consists of software developed by the Storage Networking Industry Association ("SNIA") (http://www.snia.org/). This file is provided to you in binary code form only under the terms of the following license from the SNIA, and the additional license from Troika Networks, Inc. which follows the license from the SNIA. IBM did not modify this software, and the source code for this software is available from http://sourceforge.net/ under the terms and conditions of the following licenses: STORAGE NETWORKING INDUSTRY ASSOCIATION PUBLIC LICENSE Version 1.1  ________________________ 1. Definitions. 1.1 "Commercial Use" means distribution or otherwise making the Covered Code available to a third party. 1.2 "Contributor" means each entity that creates or contributes to the creation of Modifications. 1.3 "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.4 "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof. 1.5 "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.6 "Executable" means Covered Code in any form other than Source Code. 1.7 "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A. 1.8 "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the terms of this License. 1.9 "License" means this document. 1.10 "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.11 "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is: A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications. B. Any new file that contains any part of the Original Code or previous Modifications. 1.12 "Original Code" means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License. 1.13 "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor. 1.14 "Source Code" means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge. 1.15 "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1. For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity. 2. Source Code License. 2.1 The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims: (a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or without Modifications, and/or as part of a Larger Work; and (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License. (d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original Code or ii) the combination of the Original Code with other software or devices. 2.2 Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license (a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and (b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination). (c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes Commercial Use of the Covered Code. (d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor. 3. Distribution Obligations. 3.1 Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5. 3.2 Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party. 3.3 Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code. 3.4 Intellectual Property Matters. (a) Third Party Claims. If Contributor has actual knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter. (b) Contributor API's. If Contributor's Modifications include an application programming interface and Contributor has actual knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5 Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be most likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear that any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability (excluding any liability arising from intellectual property claims relating to the Covered Code) incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. 3.6 Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligation of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability (excluding any liability arising from intellectual property claims relating to the Covered Code) incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7 Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License. 6.1 New Versions. The Storage Networking Industry Association (the "SNIA") may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number. 6.2 Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by the SNIA. No one other than the SNIA has the right to modify the terms applicable to Covered Code created under this License. 6.3 Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Storage Networking Industry Association," "SNIA," or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the SNIA Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.) 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1 This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within a reasonable time after becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive. 8.2 If You initiate litigation by asserting a patent infringement claim (excluding declaratory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as "Participant") alleging that: (a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above. 8.3 If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4 In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of this License or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A. 14. ACCEPTANCE. This License is accepted by You if You retain, use, or distribute the Covered Code for any purpose. EXHIBIT A —The SNIA Public License. The contents of this file are subject to the SNIA Public License Version 1.0 (the "License"); you may not use this file except in compliance with the License. Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is                     . The Initial Developer of the Original Code is   [COMPLETE THIS]    . Contributor(s): ______________________________________. ______________________________ Copyright (c) 2000 Troika Networks, Inc. All Rights Reserved. Troika Networks, Inc., hereby grants a non-exclusive license under Troika Networks' copyright to copy, modify and distribute this software for any purpose and without fee, provided that the above copyright notice and the following paragraphs appear on all copies. Troika Networks, Inc.. makes no representation that this source code is correct or is an accurate representation of any standard. IN NO EVENT SHALL TROIKA NETWORKS HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, OR SPECULATIVE DAMAGES, (INCLUDING WITHOUT LIMITING THE FORGOING, CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES) INCLUDING, BUT NOT LIMITED TO INFRINGEMENT, LOSS OF USE, BUSINESS INTERRUPTIONS, AND LOSS OF PROFITS, IRRESPECTIVE OF WHETHER TROIKA NETWORKS HAS ADVANCE NOTICE OF THE POSSIBILITY OF ANY SUCH DAMAGES. TROIKA NETWORKS INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS AND TROIKA NETWORKS INC HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS OR MODIFICATIONS. ******************************************************************************** * Last minute changes to Documentation ALL * ******************************************************************************** There are no clarifications or corrections for this section. ******************************************************************************** * TAPEAlertmsg default value * ******************************************************************************** The default value of TAPEAlertmsg (see SET TAPEAlertmsg and Query TAPEAlertmsg commands) is OFF. This corrects the Administrator's Reference which falsely states that the default value is ON. ******************************************************************************** * SUN DISK PERFORMANCE * ******************************************************************************** Best performance will be realized by using either native or Veritas raw partitions when defining disk storage pool, database or log volumes. See the command reference under each of the define volume(dbvol, logvol, volume) commands. ******************************************************************************** * z/OS Reverse DNS Lookups * ******************************************************************************** Connection information and schedule contact information for clients using TCP/IP continues to be maintained using TCP/IP dotted decimal notation. Reverse DNS Lookup functions are not available for the z/OS server. ******************************************************************************** * ACSLS volume locking limitation * ******************************************************************************** TSM Server users may encounter problems with ACSLS defined volumes when lockid's get out of sync between the TSM Server and the ACSLS Server. This is a known limitation of the interface and can be circumvented by following STK's guidelines. The guidelines consist of manually unlocking the volumes(using the ACSLS server console) and recycling the TSM Server. ******************************************************************************** * Automatic Labeling of Tape Volumes * ******************************************************************************** TSM now provides the option to have the server automatically label tape volumes in TSM library of type SCSI. This option takes a "label when first used" approach. The server will label both blank and incorrectly labeled tapes when they are initially mounted. This eliminates the need to prelabel a set of tapes. You need only to checkin the tapes specifying that only the barcode label should be used. Both scratch and private volumes are candidates for the labeling operation. Both blank and incorrectly labeled tapes will be labeled if they are NOT already known to the server. In the case of a private mount request, the server must also show the volume to be in an empty state or the server must be able to determine that the tape is blank. If the server can not make such a determination, the volume will not be labeled. In the case of a labeling failure (I/O Error writing Label etc.), the server will handle it in the following manner. The server will issue one or more error messages describing the problem encountered during the failed attempt to write a label to the tape volume. If the volume status is scratch, the server will change the status of the volume to private so that it can not be selected for future scratch mounts. Server processing will continue with another scratch volume. Note that although the status has become private, the volume is not defined to a storage pool. When such an error occurs, you can review the error messages to determine the cause of the failure, and correct the problem. You can attempt to relabel the scratch volume with the LABEL LIBVOLUME command. Once the problem is corrected, you can update the status of the volume to scratch by using the UPDATE LIBVOLUME command. If it is determined that the problem can not be corrected, the volume can be removed from the library with the CHECKOUT LIBVOLUME command. When checking in blank tapes, you must specify CHECKLABEL=BARCODE on the CHECKIN LIBVOLUME command. This will permit the checkin to occur without errors. When auditing a library which contains blanks tapes, you must also specify CHECKLABEL=BARCODE to have the server ignore the blank tapes. To support this option, the define, update and query library commands have been modified. The define and update library commands have be updated to allow you to indicate when labeling should be performed. The query library command has been updated to provide the state of automatic labeling. DEFINE LIBRARY -------------- >>-DEFine LIBRary--library_name---------------------------------> .-LIBType--=--MANUAL-----------. >--+------------------------------+---------------------------->< '-LIBType--=--+-MANUAL-------+-' +-SCSI--| A |--+ +-349X--| B |--+ +-EXTernal-----+ +-ACSLS--| C |-+ '-RSM--| D |---' A (SCSI) .---AUTOLabel--=--No-----------. |--+------------------------------+------------------| +---AUTOLabel--=--No-----------+ +---AUTOLabel--=--Yes----------+ '---AUTOLabel--=--OVERWRITE----' ..... AUTOLabel Specifies whether the server attempts to automatically label tape volumes. This parameter is optional. The default is NO. Possible values are: No Specifies that the server can not attempt to label any volumes. Yes Specifies that the server only labels unlabeled volumes. OVERWRITE Specifies that the server should attempt to overwrite existing labels. The server will overwrite existing labels only if both the existing label and barcode label are not already defined in any server storage pool or the volume history list. UPDATE LIBRARY -------------- >>-UPDate LIBRary--library_name---------------------------------> >------| A (SCSI) |-------------------------------------------->< A (SCSI) .---AUTOLabel--=--No-----------. |--+------------------------------+------------------| +---AUTOLabel--=--No-----------+ +---AUTOLabel--=--Yes----------+ '---AUTOLabel--=--OVERWRITE----' .... AUTOLabel Specifies whether the server attempts to automatically label tape volumes. This parameter is optional. The default is NO. Possible values are: No Specifies that the server can not attempt to label any volumes. Yes Specifies that the server only labels unlabeled volumes. OVERWRITE Specifies that the server should attempt to overwrite existing labels. The server will overwrite existing labels only if both the existing label and barcode label are not already defined in any server storage pool or the volume history list. QUERY LIBRARY ------------- Shows value of AUTOLabel in the results. ******************************************************************************** * LABEL LIBVOL Listing for Scsi libraries * ******************************************************************************** TSM now provides a new option and capability in the LABEL LIBVOL command for Scsi libraries. This new capability allows you to specify an entire list of volume names to label either in the command or in a file. To support this option, the LABELSource parameter of the LABEL LIBVOL command has been altered. Now the LABELSource parameter can be set to Vollist. When this option is utilized the Vollist parameter must be specified: either to a list of names or a file name containing a list of names. LABEL LIBVOL (SCSI) ------------------- >>-LABel LIBVolume--library_name--------------------------------> >----+-volume_name------------------------------------------------------+----> '-SEARCH--=--+-Yes--+-------+-+--LABELSource--=--+-Barcode-+-------+ | '-| A |-' | +-Prompt--+ | '-Bulk-----------' '-Vollist-+-| B |-' .-OVERWRITE--=--No------. >--+-------------------------+--+-----------------------+------>< '-CHECKIN--=--+-SCRatch-+-' '-OVERWRITE--=--+-No--+-' '-PRIvate-' '-Yes-' A (SEARCH=Yes) |--+-VOLRange--=----volume_name1,volume_name2---+---------------| | .-,-----------. | | V | | '-VOLList--=--+---volume_name-+--+-----------' '-FILE:--file_name-' B (LABELSource=Vollist) .-,-----------. V | |----VOLList--=--+---volume_name-+--+---------------------------| '-FILE:--file_name-' .... LABELSource Specifies how or whether the server reads sequential media labels of volumes. This option is only valid for SCSI libraries. Specify this parameter only when SEARCH=YES or SEARCH=BULK. Barcode The server attempts to read the bar-code label. If the attempt fails, the server will not label the volume and will display a message. Prompt The server prompts for volume names as necessary. Vollist The server uses the list of names in the command or if a file was specified, attempts to read the file for the list of names. If the attempt to read the file fails, the server will not label the volumes and will display a message. VOLList Specifies a list of volumes. Use this parameter to limit the search for volumes to be labeled when you specify SEARCH=YES. If there are no volumes in the library that are in the list, the command completes without errors. This parameter must be used if LABELSource=Vollist. volume_name Specifies the names of one or more values that are used for the command. For example: VOLList=TAPE01,TAPE02 FILE:file_name Specifies the name of a file that contains a list of volumes for the command. In the file, each volume name must be on a separate line. Blank lines and comment lines that begin with an asterisk are ignored. For example, to use volume TAPE01, TAPE02 and TAPE03, create a file, TAPEVOL, that contains these lines: TAPE01 TAPE02 TAPE03 You can specify the volumes for the command as follows: VOLList=FILE:TAPEVOL NOTE: The file name is case-sensitive. .... The LABEL LIBVOL command remains the same for Manual, ACSLS, and 349X libraries. All other parameters and fields of LABEL LIBVOL also remain the same. ******************************************************************************** * LanFree Particulars * ******************************************************************************** Restarting Storage Agent: In most cases, it is no longer necessary to halt and restart a LanFree Storage Agent to pickup changes in the Data Manager server. For example: Changing the ExternalManager attribute of the path definition for an External Library; it is not necessary to stop and restart the Storage Agent. For each new client session, the Storage Agent refreshes the Library and associated path information on the Storage Agent. For Shared Libraries, changes to the designated Primary Manager are reflected on the Storage Agent when the next client session begins. There are times however, when the Storage Agent must be restarted to obtain changes for a small variety of reasons. * If the Server attributes of the Primary Library Manager for a Shared Library changes, restarting the Storage Agent is required to get these changes. This would be necessary if the password or highlevel/lowlevel address of the server definition were changed on the Data Manager server and the Storage Agent is using that specific Library. The Storage Agent must also be restarted if authorization is turned off on the Primary Library Manager. * If the REName STGpool command is used on a Lan-Free Storage Pool, restarting the Storage Agent is required to discern this change. * Deleting or deleting and redefining a Lan-Free Storage Pool with the same name but different attributes will not be reflected on the Storage Agent without halting and restarting it. * Updating Stg Pool attributes are not reflected on the Storage Agent. Stopping and and restarting the Storage Agent is required to pick-up the changes. Note: The affects on LanFree Storage Pools outlined above are not critical enough to instigate serious problems. StgPools, Libraries and Device Classes stored in core memory on Storage Agents are used to determine potential LanFree destinations. Final arbitration and target volume selection occurs on the Data Manager Server. Certain Storage Pool attribute updates may result in failed request rather than the desired LAN failover by the Storage Agent. If the Storage Agent accurately predicts a LanFree destination, the LanFree operation will most likely be successful. However if the Storage Agent inaccurately predicts a LanFree destination exists and the server is unable to substantiate the request the operation has advanced past the point where LAN failover will occur and the storage request is unsuccessful. z/OS Shared Library support. Limitations: If the Primary Library Manager is unavailable when a Storage Agent is loaded with Policy applicable to LanFree, the Storage Agent will continue the LanFree storage operation until the Library Client function on the Storage Agent attempts to contact the Library Manager at which point the client operation will complete unsuccessfully. For successful LanFree operational support, the Library Manager nominated as the Primary Library Manager for the shared library must be available and properly configured. z/OS LanFree Volume selection: Limitations: SCRATCH tape mounts are not supported in z/OS LanFree configurations. For LanFree volume selection to satisfy a Storage Agent request for a target volume, the volume must have first been written to by the z/OS Version 5.2 TSM server at least once. Once a volume entry has been recorded in the z/OS TSM server database as a Version 5.2 z/OS volume, the volume becomes eligible for LanFree Storage Agent use. When volumes transition from filled or filling to empty, the volume remains eligible for LanFree volume selection. It becomes imperative that volumes destined for LanFree storage requests be DEFINE rather than allowing the z/OS TSM server to allocate a SCRATCH volume when populating a LanFree Storage Pool. DEFINEd volumes remain in the Storage Pool when emptied thus making the volume a candidate for LanFree volume acquisition. ******************************************************************************** * Display Limitations * ******************************************************************************** 1. The length of text that is displayed in the output for some QUERY commands ( for example QUERY SCHEDULE ) may not fit in the column width of the output table. This causes some words or phrases to wrap to the next line within the column. This kind of output depends on the length of the text and varies depending on the language the server is running in. When this kind of wrapping occurs, an alternative to viewing the text is to issue the QUERY with FORMAT=DETAIL option. 2. For the Web administrator interface, you must use a browser that supports the codepage of the server. If the browser does not support the codepage of the server, the Web Adminstrator panels may be unreadable. In this case it is recommended to use a WEB browser that supports the code page of the server. 3. Server messages that wrap to the next line may display with an extra blank line between the line. 4. It is possible for a word to be split to the next line in the middle. This may occur in the following examples: - The text needs to wrap to the next line but the last word on the line is long in length. Typically the server will try to split the text at a blank space but if the word at the end of the line is long then the server may break in the middle of the word and wrap the rest of the word/text onto the next line. - There is not enough space on the present line to fit the word. 5. Users running the server in a language other than 'en_US' and using the 'SHOW EVENTS' feature from the Web Administrator client will see garbage characters in the WEB event console. This is due to a problem with the feature not setting the locale and displaying the characters correctly. The workaround is to see the messages on the server console. 6. When running the server in a language other than English, the values in some the output of a QUERY from the server console may be in the language the server is running whereas the value from the Web Administrative Client may appear only in English. The WEB Admin Client retrieves information differently than QUERY commands issued on the server console. The WEB Admin Client, today, uses the server SQL tables to retrieve information for display. The SQL table may use English words only. Example 1: From server console issue: QUERY DEVCLASS FORMAT=DETAIL From Web Admin Client click: Objects->Server Storage->Device Classes->Query Device Class Choose 'Format for Results' = Detailed Result: The field "Device Access Strategy" will show the value translated on the server console, whereas, the value from the WEB Administrative Client will show the value in English only. Example 2: From server console issue: QUERY STGPOOL FORMAT=DETAIL From WEB Admin Client click: Objects->Server Storage->Storage Pool->Query Storage Pools Choose 'Display Format' = Detailed Results: The field "Storage Pool Data Format" will show the value translated on the server console, whereas, the value from the WEB Administrative Client will show the value in English only. 7. The TSM server uses the '~', tilde, character as a variation of a new line character. Server messages that may display a word that has a '~' tilde character in it( for example a directory path with a '~' tilde in it ) will be interpreted by the server as a new line character and will 'split' the line at the the tilde and continue the rest of the message on the next line. 8. There will be a few server messages at the beginning of TSM server initialization that will appear only in English due to the server needs to perform some initialization of output function and language support before it can begin issuing messages in the user specified language. 9. The TSM Management Console on Windows has a problem of display text received from the TSM Server that may cause some national characters to be displayed incorrectly. 10. For users of TSM Server on Windows and TSM Management Console. When a DBCS character is specified in the description field of a schedule, the schedule cannot be created from scheduling wizard of the TSM Management Console. There is currently a TSM restriction on the type of strings that can be used in various supplemental information fields of TSM objects such as schedules. This is to be addressed in a future release of TSM. To avoid such errors, do not use DBCS characters in the supplemental information fields of TSM objects. Users can avoid the problem by creating schedules from WEB Administrative Client. In additions, if you were to install the TSM server into directory d:\xyz\tivoli\tsm (where xyz are three DBCS characters) by selecting custom install, the TSM Management Console encounters problems. Given the complex nature and size of this issue, it will be addressed in the next release of TSM. To avoid such errors, do not use DBCS characters in the names on directories used by the TSM server. ------------------------------------------------------------------------------ Note: To avoid server volume creation problems, users should not specify DBCS characters during server volume creation. ------------------------------------------------------------------------------ 11. When installing the TSM Server on a Spanish Windows system the language selection panel may fail to choose a default language. That panel will be in English. It does not affect the available languages. Any language, including Spanish, can be selected from the pull-down and it will be used for the remainder of the installation. 12. In the language selection panel of the Windows TSM Server installation, the Chinese Traditional text is mis-typed. ******************************************************************************** * Simultaneous Write Limitations * ******************************************************************************** A problem has been discovered with the Simultaneous Write function that could potentially cause the server to abort. The abort could occur if the storage hierarchy meets all of the following criteria: 1. Contains more than one primary storage pool in the hierarchy. This is defined as having the NEXTPOOL parameter of a primary storage pool defined to another primary storage pool. For example, DISKPOOL has the NEXTPOOL parameter set to TAPEPOOL. 2. One of the primary storage pools has at least one copy storage pool defined. Using the example in criteria 1, either DISKPOOL may have the COPYSTGPOOL parameter set to COPYPOOL or TAPEPOOL may have the COPYSTGPOOL parameter set to COPYPOOL, but not both. 3. There exists at least a primary storage pool in the storage hierarchy that has a different copy storage pool list. This includes having no copy storage pools defined. Using the example above, TAPEPOOL could have no copy storage pools defined or a different copy storage pool other than COPYPOOL. Apar PQ70788 has been opened to address this problem. Until such time that PQ70788 is available, ensure that all primary storage pools in a storage hierarchy have the same copy storage pools defined in the COPYSTGPOOL parameter. Using the example above, if one intends to use the Simultaneous Write function, DISKPOOL and TAPEPOOL must both have COPYPOOL defined. Use the QUERY STGPOOL and UPDATE STGPOOL commands to correct the hierarchy if necessary. ******************************************************************************* * Simultaneous Write may not remove failing copy storage pool. * ******************************************************************************* There are error conditions that may occur during Simultaneous Write operations in which the copy storage pool may not be removed within the session. In some cases, if an error occurs writing to a copy storage pool during a simultaneous write operation, the server will examine the COPYCONTINUE parameter to determine how to proceed. Customers using the COPYCONTINUE parameter set to YES may find that the failing copy storage pool is not excluded from futher writes while the specific client session is active. Work around: - Examine the error messages and correct any problems, if possible. Retry the operation when the problem has been corrected. or - Use UPDATE STGPOOL command to eliminate the failing copy storage pool. For example, 1. The primary storage pool BACKUPPOOL has a copy pool defined. Assume that the name of the copy storage pool is COPYPOOL. 2. Copy storage pool COPYPOOL uses a shared library to store data. 3. A client backup operation starts but the TSM server cannot establish a communication session with the primary library manager. 4. The backup operation fails since the library manager was found to be unavailable. 5. The copy storage pool COPYPOOL is NOT excluded from any further writes. 6. Work around: - Start the library manager. Once the library manager is up and operational, retry the backup operation. or - Issue the UPDATE STGPOOL BACKUPPOOL COPYSTGPOOL="" command to remove the failing copy storage pool. IMPORTANT NOTE: When removing the copy storage pool from the copy storage pool list, it is very important to ensure that a storage pool backup is scheduled. It is recommended in the TSM Users Guide to establish a schedule that includes a storage pool backup for any primary storage pool that has a copy storage pools defined. This is necessary in the event that the Simultaneous Write operation removes the copy storage pool as the result of an error. ******************************************************************************** * NDMP File-Level Restore support for international characters * ******************************************************************************** IBM Tivoli Storage Manager (TSM) 5.2 introduces file-level operations for backup and restore of NAS file servers. During backup of data on a NAS file server, you may request that TSM create a table of contents (TOC). The TOC will be stored on the TSM server and will be accessible during a restore of data on a NAS file server, allowing you to select specific files to restore. For Network Appliance NAS file servers, full functionality requires that you also install Data OnTap 6.4.1, when available, on your NAS file server. Please note the following restrictions: If your level of Data OnTap is prior to 6.4.1, you must have one of the following configurations in order to take advantage of the new support: 1. Your data (the data on your Network Appliance NAS file server that you intend to back up with TSM) has filenames that contain only English (7-bit ASCII) characters. 2. Your data has filenames that contain non-English characters and the volume language is set to the UTF-8 version of the proper locale (for example, de.UTF-8 for German). For any configuration where the level of Data OnTap is prior to 6.4.1, the TSM server will print a warning message (ANR4946W) during backup operations indicating that the character encoding of NDMP file history messages is unknown and UTF-8 will be assumed in order to build a TOC. In the above configurations, it is safe to ignore this message. If your level of Data OnTap is 6.4.1 or later, you must have one of the following configurations in order to take advantage of the new support: 3. Your data has filenames that contain only English (7-bit ASCII) characters and the volume language is not set or is set to one of: C (POSIX), en, en_US, en.UTF-8 or en_US.UTF-8. 4. Your data has filenames that contain non-English characters and the volume language is set to the proper locale (for example, de.UTF-8 or de for German). Note that using the UTF-8 version of the volume language setting is more efficient in terms of TSM processing and TOC storage space. 5. You only use CIFS to create and access your data. Note that all systems that create or access data on a particular NAS file server volume must do so in a manner compatible with the volume language setting. Results with configurations other than the above are unpredictable. ******************************************************************************** * IBM Devices 3570, 3590, and Ultrium: Required Minimum Level for Device Driver ******************************************************************************** Customers who own IBM 3570, 3590, or Ultrium tape libraries and/or drives should upgrade their IBM SSG Open Systems Device Driver which support those devices. The following table lists the minimum levels that are required to function with TSM 5.2.0.0, but it is recommended to install the latest current driver that is available. In some cases the current-latest driver supercedes all others and is the only one available. The device driver software is installed separately and should be installed prior to installing the TSM Server or Storage Agent. These can be found at ftp://ftp.software.ibm.com/storage/devdrvr OS Driver Name Minimum Level for TSM 5.2.0.0 ================= =================== ============================= AIX Atape 8.2.8.0 Solaris IBMtape 4.0.7.5 Windows 2000 IBMMag.Win2K 5.0.4.5 IBMUltrium.Win2K 5.0.4.5 Windows 2003 IBMTape.W2K3 6.0.0.4 HP-UX 11.00 atdd 1.9.0.2 HP-UX 11.11 (aka 11i) atdd 3.1.0.2 Linux RHAS 2.1 IBMtape 1.3.3 Linux SLES 8 xSeries IBMtape 1.3.3 Linux SLES 8 zSeries IBMtape 1.3.2 Linux SLES 7 IBMtape 1.3.2 Linux SLES 8 pSeries IBMtape 1.3.4 when available ******************************************************************************** * $$2 Library Sharing and LAN-Free Upgrade Considerations * ******************************************************************************** Compatibility ------------------------- Version 5.2 and above of the Server and Storage Agent are not backwards compatible with version 5.1 and below of the Server and Storage Agent when in a LAN-Free environment. All Servers and Storage Agents in a LAN-Free environment must be upgraded to 5.2 in order to function properly. Common Configuration Problems ----------------------------- The handling of idle volumes for library sharing has been improved in 5.2. Volumes now go into the idle state on both the library client and library manager. The library manager then needs to contact the library client or storage agent to dismount the volume. The following error messages can occur if the hladdress or lladdress from the DEFINE SERVER command are incorrect. ANR8214E Session open with libclient.tucson.ibm.com failed due to connection refusal. ANR0454E Session rejected by server LIBCLIENT, reason: Communication Failure. ANR8779E Unable to open drive /dev/rmt0, error number=16. Issue the UPDATE SERVER command on the library manager for the library client or storage agent definitions to resolve the problem. Path Definitions ---------------- In version 5.1 and above DEFINE PATH and DEFINE DRIVE are not allowed on the library client. These definitions are now done on the library manager server. Definitions from 4.2 and below need to be migrated over to the library manager server by following these steps: 1. Retrieve the path information from the library client through the device configuration(DEVCONFIG) file or the QUERY PATH command. 2. Use the data gathered in step 1 to issue the DEFINE PATH commands on the library manager server. 3. Delete the path definitions on the library client with DELETE PATH. 4. Delete the drive definitions on the library client with DELETE DRIVE. ******************************************************************************** * Concurrent NDMP Backups of EMC Celerra Data Movers using fibre attached DLT * * drives * ******************************************************************************** Limitation: Starting concurrent NDMP backups on an EMC Celerra data mover is not supported where the target backup devices are DLT drives on the same SCSI bus and the drives are attached to an IBM 2108 SAN Data Gateway (all models) or an ADIC Pathlight 5000. Concurrent NDMP Backups of Celerra data movers to direct SCSI attached DLT drives is supported. ******************************************************************************** * Archive utilities provided * ******************************************************************************** APAR IC34521 requested that the IBM Tivoli Storage Manager server provide function to allow customers to manage archive usage and improve archive performance, which was degrading over time. The function requested is being provided now in the form of two commands to help experienced storage administrators manage space utilization and performance for archive operations: UPDate ARCHIve UNDO ARCHConversion The functions also provide a means to audit the archive descriptions. Customers who archive hundreds or thousands of files everyday, or who currently have hundreds of thousands of archive entries for a given node, might benefit from the information provided below and the new commands. Background: IBM Tivoli Storage Manager allows clients to organize archive files into packages. The description field of an archive request allows users to group files, and serves as the way to identify the package. To support the packages: - All archive requests using the same description become members of an archive package. If the user does not specify a description, the client provides a default description with each archive request. The default description includes the date. - The server has description tables for archives to boost performance for clients that query, retrieve, or delete archive files using the description option. The description tables are secondary tables designed to search more efficiently for archive packages. Clients also archive the paths (directories) to the files to preserve platform- specific access permissions. The directories are also included in the packages. If the same path specification is archived with different descriptions, the directory is entered into each package. The GUI and Web clients navigate through the descriptions and the directories to ultimately display archived files. They always use descriptions to query, retrieve, or delete archive directories and files. The command line client does not navigate through a node's archive space during display, but users can specify a description (and the directory) to query, retrieve, or delete a group of files. When a node archives a file: - If the package is new, or if the description exists but the file's directory is not already a member, the directory is entered into the primary archive table. - Files are always entered into the primary archive table. - If the node is "converted", entries are also made for the directory (if needed) and the files in the secondary description tables. Recommendations for archive operations: - Clients that query, retrieve, or delete using the description should be "converted" to search in the description tables. GUI and Web clients are always converted. CONVERT ARCHIVE should be issued for command line clients. - If most of the files for a node have unique names, searches can be performed efficiently without a description. - If a node archives files with the same directory many times (tens of thousands) with different descriptions, the node should be converted. If this node issues a "query archive" from the command line, multiple entries for the directory will appear. Closer inspection will show that the entries have different descriptions. - If a node archives the same directory and file name many times (tens of thousands), search performance will be improved if they are archived with different descriptions and the node is converted. The client could try to use FROMDate and TODate options to distinguish a set of files, however the date options are always inefficient search options. - The description tables require extra database space. Managing performance and storage for archives: - Users who always use the command line interface and never intend to use the description option to group their files can reduce storage requirements needed for the directory entries by always specifying the same description. This description must be at least one character in length. - There is no need to convert the node - There will be one archive package, thus one copy of a directory entry is kept. The savings will be noticeable when the same path specification is archived multiple times over multiple days. Notes: - Use this technique only when the node's files have unique names. - The technique is not recommended if the user might use the GUI or Web interface for the node in the future. - Command line users who do not need the directory level access permissions can reduce storage requirements by using the -v2Archive option with the archive request. Notes: The GUI and Web clients use the directories in the archive navigation scheme. This option is not recommended for GUI or Web users. New Commands: UPDATE ARCHIVE -------------- Use this command to reduce the space used by existing archive and description tables for nodes that have large numbers of archive entries (hundreds of thousands). Use this command only when the users of the node always use the Tivoli Storage Manager command-line client interface. Do not use this command for a node if the user has used or might use the GUI or Web client interface to work with archived files. Privilege class: Policy privilege for the policy domain for the node. .-SHOWstats----------. .-Wait--=--No-----. >>-UPDate ARCHIve--node_name--+--------------------+--+-----------------+--->< +-SHOWstats----------+ '-Wait--=--+-No---+ +-RESETDescriptions--+ '-Yes--' '-DELETEDirs---------' Parameters: node_name Specify the node name for the operation. (operation) SHOWstats Specifies that statistics about the node should be displayed. This is the default value if you do not specify either RESETDESCRIPTIONS or DELETEDIRS. The statistics include the number of directory and file entries, the number of entries for directories with the same path specification but different descriptions, and whether the node is converted. RESETDescriptions Resets the description field to the same description for all archive entries for a node. This reduces the number of archive packages, thus the number of entries for a given directory specification, to one. After you update the descriptions for a node by using this option, a user of that node should specify the same description when archiving subsequent files. If the same description is not specified, the number of directory entries with the same path specification for the node's archives will continue to increase. ATTENTION: This option is destructive. Once the descriptions are changed, they cannot be restored. DELETEDirs Deletes all archive directory entries for the node. The option should be used if restoring archive directory access permissions when retrieving archive files is not important to the user. If the directory entries are removed, subsequent archives should specify the -v2Archive option. If the option is not specified, the number of directory entries will continue to increase. ATTENTION: This option is destructive. Once the directory entries are removed, they cannot be restored. Wait Specifies whether the command runs in the background. The default is NO. No Perform the command in the background. Yes Perform the command in the foreground. You can specify this value only from an administrative client, not from the server console. UNDO ARCHCONVERSION ------------------- Use this command to remove all directory and file entries for a node from the archive description tables. Because the description tables are secondary tables, the UNDO ARCHCONVERSION command does not lose archive directory or file data; the command does not affect the primary archive table entries. Use this command: - To reduce the database space needed to support the description tables. Use this only for nodes that use the command line interface, which does not use archive packages for retrieving archives. - To audit the description tables. Issue the UNDO ARCHCONVERSION command, then convert the node again (CONVERT ARCHIVE). Privilege class: Policy privilege for the policy domain for the node. >>-UNDO ARCHConversion--node_name--------------------------------->< Parameters: node_name Specify the node name for the UNDO ARCHCONVERSION operation. ******************************************************************************** * $$2 Requirements for the web administrator interface * ******************************************************************************** The web administrator interface supports one of the following browsers: o Internet Explorer 5.5 and above o Netscape 6.0 and above o Mozilla 1.0 and above The browser must provide the following feature support: o HTML 3.0 or higher o DHTML o JavaScript 1.0 or higher o Java 1.1.8 or higher o Live Connect (Java to JavaScript communication) JavaScript is used throughout the interface. Java is used for the Event Viewer and Command Line. The command line uses Live Connect to execute the command. Make sure the security settings of your browser do not disable the above features. Otherwise, some parts of the interface may fail to function. ******************************************************************************* * APARs fixed in this and prior levels * ******************************************************************************* APARs fixed in level 5.2.6.1 |IC46525 |ANR8972E WHEN DEFINING DRIVE PATHS IN TSM SERVER 5.2.2.0 OR |IC46525 5698ISMSV 53W | |IC46544 |DEFINE VOLUME FAILS WITH ANR7820W INSUFFICIENT SPACE AVAILABLE |IC46544 5698ISMSV 53W | |IC46645 |NO-QUERY-RESTORE OF AN IMPORTED LINK MAY BE INCORRECT |PK07982 5698ISMVS 530 | |PK07900 5698ISMVS 520 | |IC46645 5698ISMSV 52S | |IC46687 |TSM SERVER DOES NOT DETECT WHEN TSM CLIENT SCHEDULER |PK08356 5698ISMVS 530 | |IC46687 5698ISMSV 52A | |PK08331 5698ISMVS 520 | |IC46710 |TSM SERVER AUDITDB MAY NOT CORRECT ALL DATABASE INCONSISTENCIES |IC46710 5698ISMSV 52A | |PK08809 5698ISMVS 520 | |IC46732 |CLEANING CARTRIDGE IS NOT AUTOMATICALLY UNLOADED AFTER CLEAN |IC46732 5698ISMSV 53L | |IC46739 |TSM DEVICE DRIVER CAUSES SOLARIS SYSTEM CRASH |IC46739 5698ISMSV 52S | APARs fixed in level 5.2.5.0 |IC41032 |MISSING CLIENT LEVEL INFORMATION WITH "QUERY NODE" AND SQL |IC41032 5698ISMSV 52W | |IC41991 |TSM SERVER RANDOMLY GENERATES ANR2032E QUERY: COMMAND FAILED - |PQ95247 5698ISMVS 520 | |IC41991 5698ISMSV 51S | |PQ95223 5698ISMVS 510 | |IC42112 |ITSM SERVER CRASHES AFTER PASSING CORRUPT FILEHANDLE |PQ98992 5698ISMVS 520 | |PQ99046 5698ISMVS 530 | |IC42112 5698ISMSV 52A | |IC42249 |ITSM SNMP SUBAGENT (DSMSNMP) MAY STOP COMMUNICATING |IC42249 5698ISMSV 52A | |IC42488 |ANR9999D BFCREATE.C "INCONSISTENT CONTENT FOR ALIAS AGGREGATES" |IC42488 5698ISMSV 52A | |PQ99546 5698ISMVS 530 | |IC43965 5698ISMSV 53A | |IC43941 5698ISMSV 51A | |PQ99476 5698ISMVS 510 | |IC42680 |SERVER CORE DUMPS AFTER DSMSERV DISPLAY DBV |PQ95364 5698ISMVS 520 | |IC42680 5698ISMSV 52A | |IC42737 |SOME REPORTS ARE INCORRECT IN THE OPERATIONAL REPORTING REPORT. |IC42737 5698ISMSV 52W | |IC42777 |SERVER CRASHES, CORE DUMPS WHEN INVALID SQL SYNTAX WAS ENTERED |PK01309 5698ISMVS 520 | |PK01310 5698ISMVS 530 | |IC42777 5698ISMSV 51A | |IC42793 |Remove a CLOPTSET from a node definition ("update this node") v |IC42793 5698ISMSV 52W | |PQ97486 5698ISMVS 520 | |IC42827 |TSM Server coredumps in iconv_open on AIX |IC42827 5698ISMSV 52A | |IC42911 |UNLOADDB FAILS WITH ANR9999D INDICATING THAT THE |IC42911 5698ISMSV 52A | |PQ96420 5698ISMVS 510 | |PQ96494 5698ISMVS 520 | |IC42930 |MESSAGE "ANR2032E UPDATE DRIVE: COMMAND FAILED - INTERNAL SERVE |IC42930 5698ISMSV 52A | |IC42942 |TSM HP server crashes when it fails to open the message file |IC42942 5698ISMSV 52H | |IC42996 |ITSM CORE DUMP AFTER MOUNTMODE CONSOLE SESSIONS ARE CANCELLED |PQ99079 5698ISMVS 510 | |IC43469 5698ISMSV 52A | |IC42996 5698ISMSV 51A | |IC43019 |ANR9771E: Volume has incorrect barcode label... seen |IC43019 5698ISMSV 52A | |IC43029 |ANR9999D COLUMN COUNT MISMATCH FOR TABLE AF.AUDIT.CLUSTERS |IC43029 5698ISMSV 51A | |PK00792 5698ISMVS 530 | |PK00733 5698ISMVS 510 | |PK00737 5698ISMVS 520 | |IC43063 |ANR2023E DEFINE SERVER: EXTRANEOUS PARAMETER - DESCRIPTION |IC43063 5698ISMSV 52A | |IC43118 |ANR8972E UPDATE PATH: Unable to find the element number for |IC43118 5698ISMSV 52A | |IC43127 |ANR0646I AND ANR0729E DURING IMPORT OF CLIENTS WITH ASSOCIATED |PQ96912 5698ISMVS 510 | |PQ96990 5698ISMVS 520 | |IC43127 5698ISMSV 52W | |IC43145 |OUTER DOUBLE QUOTES FROM DEF CLIENTOPT INCLEXCL "INCLUDE |IC43145 5698ISMSV 52W | |IC43202 |UNABLE TO RUN TSM DRIVE CLEANING PROPERLY |IC43202 5698ISMSV 52W | |IC43226 |ANR0106E UNEXPECTED ERROR 2 FETCHING ROW "AS.VOLUME.STATUS" |PQ97457 5698ISMVS 520 | |IC43226 5698ISMSV 52A | |IC43227 |ARCHIVE OBJECTS MISSING EXPIRING.OBJECTS ENTRY IN ITSM DB |IC43227 5698ISMSV 51A | |PK02949 5698ISMVS 520 | |PK02952 5698ISMVS 530 | |IC43228 |ITSM SERVER CRASH IN PMCLOSEDOMAIN - INVALID ATTEMPT |IC43228 5698ISMSV 52S | |IC43257 |ANR9999D ASVOL.C(XXX): THREADID NUMEMPTYVOLS WENT NEGATIVE |IC43257 5698ISMSV 52A | |IC43287 |Long commands (exceeding 1400 characters) can cause the server |PQ98659 5698ISMVS 530 | |IC43287 5698ISMSV 53A | |PQ98666 5698ISMVS 520 | |PK02077 5698ISMVS 510 | |IC44947 5698ISMSV 51A | |IC43301 |ANR9999D MOUNT POINT DEADLOCK MESSAGE FOLLOWING SERVER TO SERVE |PQ97956 5698ISMVS 520 | |IC43301 5698ISMSV 52A | |IC43374 |ANR1663E WITH TSM LANFREE OPERATION USING EXTERNAL LIBRARY |IC43374 5698ISMSV 52A | |IC43381 |UTILITY TO CLEAN UP ORPHANS, see IC43381_1 |PK01546 5698ISMVS 530 | |IC43381 5698ISMSV 52A | |IC44620 5698ISMSV 51A | |IC44622 5698ISMSV 53A | |PK01528 5698ISMVS 510 | |IC43410 |Hardcoded limitation - 256 devices in console |IC43410 5698ISMSV 52W | |IC43449 |MOVE DRMEDIA MAY FAIL WITH ANR9999D INVALID VOLUME TYPE |IC43449 5698ISMSV 52A | |IC43526 |ON WINDOWS 2003, THE TSM UTILITY TSMDLST WILL ALWAYS REPORT THE |IC43526 5698ISMSV 52W | |IC43527 |THE 5.2.3 VERSION OF MMCTRACE UPDATES THE WRONG REGISTRY |IC43527 5698ISMSV 52W | |IC43528 |MOVE DRMEDIA REPORTS SUCCESSFUL CHECKOUT OF SHARED LIBRARY |IC43528 5698ISMSV 52A | |IC43534 |EXPORT NODE OF NODE WITH LARGE NUMBER OF OBJECTS RUNS VERY |PK00676 5698ISMVS 520 | |IC43534 5698ISMSV 52A | |IC43535 |HLA ADDRESS FIELD IN CENTERA DEVICE CLASS IS NOT CASE SENSITIVE |IC43535 5698ISMSV 52S | |IC43591 |FULL DATABASE BACKUP TAPES RESTICTED TO 32GB CAPACITY ON TSM |IC43591 5698ISMSV 52P | |IC43594 |ANR0104E ERRORS WHEN RUNNING EXPIRATION ON ARCHIVED OBJECTS |PK02934 5698ISMVS 520 | |IC43594 5698ISMSV 52W | |IC43648 |TSM SERVER ABENDS DURING QUERY TOC IF NAS FILER HAS INVALID |IC43648 5698ISMSV 52W | |IC43738 |DEFINING A DRIVE PATH FAILS WITH: ANR8972E UNABLE TO FIND THE |IC43738 5698ISMSV 52W | |IC43754 |TSM WEB ADMIN IN FRENCH DISPLAYS A SMALL LETTER "Y" WITH |IC43754 5698ISMSV 52W | |IC43796 |TSM SERVER MANAGES LAST INACTIVE VERSION BY "RETEXTRA" AFTER |PQ98755 5698ISMVS 520 | |PK00198 5698ISMVS 530 | |IC43796 5698ISMSV 52A | |IC43808 |AUDIT VOLUME FAILING WITH INTERNAL SERVER ERROR |IC43808 5698ISMSV 51W | |IC43909 |MESSAGES ANR0407I AND ANR0406I ARE NOT SHOWING CORRECT HOSTNAME |IC43909 5698ISMSV 52A | |IC43928 |AE IC37071 FIX COMPLETION - DOCUMENTATION FOR ADDTOINIT |IC43928 5698ISMSV 52S | |IC43930 |"QUERY BACKUP" USING "PITTIME" AND "PITDATE" DOES NOT DISPLAY |PK00951 5698ISMVS 520 | |IC43930 5698ISMSV 52A | |PK00988 5698ISMVS 530 | |IC43954 |ANR8447E CAUSED BY INCORRECT LTO BARCODE LABEL HANDLING |IC43954 5698ISMSV 52A | |IC43996 |ANR9999D DFMIGR.C 2907 MIGRATION TERMINATED UNEXPECTED RESULT |PQ98637 5698ISMVS 520 | |IC43996 5698ISMSV 51A | |IC43419 5698ISMSV 52A | |IC44034 |IBM TSM MESSAGE ANR1772E MAY INCLUDE INCORRECT INFORMATION |IC44034 5698ISMSV 52W | |IC44048 |DEFINING A SECOND TSM SERVER INSTANCE (MINIMAL CONFIGURATION) |IC44048 5698ISMSV 52W | |IC44102 |ANR9999D ADMADMIN.C(1877): THREADID<79> UNEXPECTED ATTEMPT TO |PQ98800 5698ISMVS 520 | |IC44102 5698ISMSV 52A | |IC44110 |ANR0102E ERROR 1 INSERTING ROW IN TABLE DS.SEGMENTS WITH |PK00076 5698ISMVS 520 | |PK00078 5698ISMVS 530 | |PK00014 5698ISMVS 510 | |IC44110 5698ISMSV 52W | |IC45196 5698ISMSV 52S | |IC44117 |VOLUMES OVERWRITTEN BEFORE CREATING PROCESS COMPLETES |IC44117 5698ISMSV 51A | |PQ99286 5698ISMVS 510 | |IC44159 |QUERY STGPOOL REPORTS INVALID ESTIMATED CAPACITY AND |PK00006 5698ISMVS 520 | |PK00007 5698ISMVS 530 | |PK00008 5698ISMVS 520 | |IC44159 5698ISMSV 52A | |IC44350 |TSM SERVER CAN CORE DUMP IF AN UPDATE DRIVE IS PERFORMED ON A |IC44350 5698ISMSV 52A | |IC44351 |TSM SERVER CAN CORE DUMP WHEN A CANCEL SESSION IS PERFORMED FOR |IC44351 5698ISMSV 52A | |PK01284 5698ISMVS 520 | |PK01290 5698ISMVS 530 | |IC44453 |TSM SERVER OFFSITE RECLAMATION FAILS WITH ANR1173E |IC44568 5698ISMSV 53W | |PK00595 5698ISMVS 510 | |PK00598 5698ISMVS 530 | |IC44453 5698ISMSV 52W | |IC44522 5698ISMSV 51W | |IC44512 |DELETE FILESPACE LOCK FAILURE RESULTS IN ORPHANED TRANSACTION |PK00194 5698ISMVS 510 | |PK00196 5698ISMVS 520 | |PK00197 5698ISMVS 530 | |IC44512 5698ISMSV 52A | |IC44550 |TSM SERVER MEMORY LEAK WHEN RUNNING OFFSITE RECLAMATION |IC44550 5698ISMSV 52A | |PK02384 5698ISMVS 520 | |IC44551 |ANR8300E RECEIVED TRYING TO DEFINE TSM SERVER PATH TO A 3854 |IC44551 5698ISMSV 51W | |IC44559 |TSM AIX SERVER NOT RELEASING SHARED MEMORY SEGMENT WHEN HALTING |IC44559 5698ISMSV 52A | |IC44574 |TSM SERVER IS ERRONEOUSLY DENYING SCHEDULED SESSIONS FROM |IC44574 5698ISMSV 52W | |IC44594 |CENTERA CLIPWRITE PARAMATER ERROR ARCHIVE COPYGROUP RETVER VALU |IC44923 5698ISMSV 53A | |IC44594 5698ISMSV 52A | |PK02017 5698ISMVS 530 | |IC44619 |AIT-3 DRIVES GO OFFLINE AFTER RECEIVING REPOSITION ERROR |IC44619 5698ISMSV 52W | |IC44720 |TSM OPERATIONAL REPORTING DOESN'T SHOW MORE THAN 1024 WEB |IC44720 5698ISMSV 52W | |IC44748 |ANR9999D BFCLONE.C(221) ...ERROR 87....DURING LANFREE BACKUP OF |IC44748 5698ISMSV 52A | |IC44765 |DOC.UPDATE FOR MSG ANR1171W AND CMD MOVE DATA: RESTORE OPERATIO |IC44765 5698ISMSV 52A | |IC44780 |5.3 STORAGE AGENT SERVICE WILL NOT START |IC44780 5698ISMSV 53Z | |IC44818 |TSM SERVER MAY CRASH OR INVALIDLY ISSUE DATA INTEGRITY |PK00949 5698ISMVS 530 | |IC44818 5698ISMSV 52A | |PK00853 5698ISMVS 510 | |PK00871 5698ISMVS 520 | |IC44833 |TSM SERVER DISPLAYS VALUES FOR IDLEWAIT COMMWAIT MEDIAWAIT |IC44833 5698ISMSV 52A | |IC44854 |TSM SERVER CORE AFTER RECLAMATION SKIPS STORAGE POOL WITH |PK04876 5698ISMVS 520 | |IC44854 5698ISMSV 53S | |IC45628 5698ISMSV 52A | |IC44883 |HELP COMMAND DOES NOT DISPLAY JAPANESE CHARACTER ON TSM SERVER |IC44883 5698ISMSV 52A | |IC44890 |EXPORT NODE DOES NOT INITIALIZE FROMTIME WITH DEFAULT VALUE OF |PK02324 5698ISMVS 510 | |PK02363 5698ISMVS 520 | |IC44890 5698ISMSV 52A | |PK02437 5698ISMVS 530 | |IC44921 |DSMADMC HANGS ON A SELECT STATEMENT THAT USES CAST WITH CHAR(N) |PK04408 5698ISMVS 530 | |IC44921 5698ISMSV 53W | |IC44946 |DSMC QUERY BACKUP -PITDATE MAY SHOW WRONG FILE BACKUP VERSION |PK03425 5698ISMVS 530 | |IC44946 5698ISMSV 52A | |PK03319 5698ISMVS 520 | |IC44976 |TSM OPERATIONAL REPORTING FAILING WITH " UNABLE TO LOAD REPT |IC44976 5698ISMSV 52W | |IC44992 |TSM SERVER MAY CRASH DURING A FULL AUDITDB. |IC44992 5698ISMSV 52W | |PK02370 5698ISMVS 520 | |PK02372 5698ISMVS 530 | |IC44995 |AUDITDB MAY TERMINATE PREMATURELY DURING AUDIT OF BITFILE |IC44995 5698ISMSV 52W | |PK02373 5698ISMVS 520 | |PK02374 5698ISMVS 530 | |IC45005 |ANR2027E AUDITDB: COMMAND FAILED - SUFFICIENT SERVER RECOVERY |PK01547 5698ISMVS 520 | |IC45005 5698ISMSV 52A | |IC45034 |TSM SERVER MAY CRASH WITH A DBTXN063 ASSERTION FAILURE DURING A |IC45034 5698ISMSV 52W | |PK02376 5698ISMVS 520 | |PK02377 5698ISMVS 530 | |IC45146 |TSM Server AUDITDB FIX=YES deleting objects in disk pools is |IC45146 5698ISMSV 51A | |PK02828 5698ISMVS 510 | |IC45167 |DP MYSAP CLIENTS ON SOLARIS DO NOT INCREASE "IN USE" LICENSES O |PK04034 5698ISMVS 520 | |IC45167 5698ISMSV 52S | |IC45184 |ON OS400 V5R3, CHECKIN LIBV FAILS WHEN CATEGORY PARAMETER IS |IC45184 5698ISMSV 52P | |IC45206 |Failed to install TSM 5.3.0 device driver into IBM 36232LX Libr |IC45206 5698ISMSV 53W | |IC45285 |DEFINE PATH FAILS ON ADIC SCALAR WITH SDLT 600 DRIVES |IC45285 5698ISMSV 52W | |IC45288 |Command line Administrative client may receive a non-zero retur |PK03288 5698ISMVS 520 | |IC45288 5698ISMSV 52A | |IC45289 |Private tapevols in shared libs not returned to private |IC45289 5698ISMSV 52A | |IC45304 |ANR4947E ERROR ON NAS BACKUP |PK02449 5698ISMVS 520 | |IC45304 5698ISMSV 52A | |IC45503 |FILES MISSING IN BACKUPSETS |PK03921 5698ISMVS 520 | |IC45503 5698ISMSV 52A | |IC45519 |CRASH WHEN LIBRARY MANAGER DISMOUNTS A VOLUME WITHOUT THE |IC45519 5698ISMSV 52S | |IC45602 |TSM server and agent in LAN-FREE config can hang during |IC45602 5698ISMSV 52A | |IC45606 |TWO SIDED RW OPTICAL PLATTER CORRUPTION POSSIBLE IF TSM STORAGE |IC45606 5698ISMSV 51A | |IC45617 |TSM SERVER CRASH IN ASACQUIREEMPTIESTVOL |PK05341 5698ISMVS 520 | |PK05464 5698ISMVS 530 | |IC45617 5698ISMSV 52W | |IC45644 |The TSM server may hang when recovery log |PK05789 5698ISMVS 510 | |IC45644 5698ISMSV 52A | |PK05790 5698ISMVS 520 | |PK05791 5698ISMVS 530 | |IC45647 |Cannot mount volumes belonging to REMOVABLEFILE device classes |IC45647 5698ISMSV 52L | |IC45672 |TSM STORAGE AGENT INSTALL PROBLEM |IC45672 5698ISMSV 52W | |IC45689 |TSM SERVER CRASHES DURING EXPIRATION PROCESSING DUE |PK04023 5698ISMVS 523 | |IC45689 5698ISMSV 52W | |IC45725 |DEFINE PATH FOR QUALSTAR 68240 FAILS WITH ANR8972E STATING THE |IC45725 5698ISMSV 53A | |IC45833 |ANR8300E WHEN ISSUING DEFINE PATH TO IBM 7212-312 LIBRARY |IC45833 5698ISMSV 52A | |IC45845 |ERRONEOUS ANR8214E SERVER PROMPTED SCHEDULE ACTIONS |IC45845 5698ISMSV 52L | |IC45895 |TSM SERVER 5.3X CAN CORE DUMP IN ROUTINE HASHFIND () |PK05134 5698ISMVS 530 | |PK04935 5698ISMVS 510 | |IC45895 5698ISMSV 53L | |PK05051 5698ISMVS 520 | |IC45902 |ANR9999D INVALID GROUP TYPE 3 ENCOUNTERED DURING EXPIRATION OF |IC45902 5698ISMSV 53W | |IC45911 |TSM SERVER CRASHES WHEN ISSUING AN IMPROPERLY FORMATTED |IC45911 5698ISMSV 52S | |IC45935 |ANR8302E I/O ERROR WITH CC=201 CAN BE CAUSED BY ERROR IN TSM |IC45935 5698ISMSV 51A | |IC45954 |MIGRATION PROCESS MAY ISSUE EXTRANEOUS ANR9999D MESSAGE AT |PK05289 5698ISMVS 523 | |IC45954 5698ISMSV 52A | |IC45967 |TSM LIBRARY MANAGER MAY CRASH WHILE ATTEMPTING TO MOUNT |IC45967 5698ISMSV 52A | |IC45975 |TSM SERVER CAN HANG, LOCK UP, OR CRASH AT 5.3.1.0 |PK05788 5698ISMVS 530 | |IC45975 5698ISMSV 53A | |IC45985 |TSM SERVER CRASHES DURING A SELECT COMMAND ON ACTLOG TABLE WHEN |IC45985 5698ISMSV 53L | |IC45990 |TSM SERVER CRASHES WHEN PROCESSING AN ERROR PATH RELATED TO A |IC45990 5698ISMSV 52A | |IC46215 |TSM SERVER MAY CRASH DURING MIGRATION WHEN 'MIGDELAY>0' |IC45879 5698ISMSV 53A | |PK05728 5698ISMVS 530 | |IC46215 5698ISMSV 52A | |PK01876 |MVS SERVER ABENDS WITH 0C4 WHEN WEB ADMIN REQUESTS |PK02044 5698ISMVS 520 | |PK02067 5698ISMVS 530 | |PK01876 5698ISMVS 510 | |PK03612 |STORAGE IS BEING ALLOCATED FOR SEVERAL CONTEXT STRUCTURES |IC45878 5698ISMSV 52A | |PK05576 5698ISMVS 530 | |PK03612 5698ISMVS 520 | |PK05709 |AFTER IMPORT WITH MERGE ONLY INACTIVE VERSION MAY NOT EXPIRE |PK05709 5698ISMVS 520 | |PQ93480 |MSG ANR2753I RESULTS IN BLANK LINE FOLLOWING LAST LINE |IC42826 5698ISMSV 52A | |PQ93480 5698ISMVS 510 | |PQ94535 |Registration of licenses WASAPPL, MANAGEDSYSSAN and DATARETEN- |PQ94535 5698ISMVS 520 | |PQ95292 |QUERY DB F=D MAY SHOW NEGATIVE VALUES FOR ""TOTAL BUFFER REQUES |PQ95292 5698ISMVS 520 | |PQ95855 |MVS SERVER ABENDED WITH 0C4 DURING A CLIENT BACKUP WHEN |PQ97453 5698ISMVS 510 | |PQ95855 5698ISMVS 520 | |IC42910 5698ISMSV 52A | |PQ96049 |PERFORMANCE DEGRADES WITH MULTIPLE SELECT COMMANDS ON SESSIONS |PQ96049 5698ISMVS 510 | APARs fixed in level 5.2.4.0 |IC39685 |WEBADMIN CHECKIN LIBVOL WITH SEARCH=BULK option NOT POSSIBLE |IC39685 5698ISMSV 52L | |IC40297 |TSM 5.2 SERVER CLUSTER WIZARD NEEDS TO BE UPDATED TO DETECT AND SUPPORT DYNAMIC DISKS. |IC40297 5698ISMSV 52W | |IC40299 |OUTPUT FROM VARIOUS QUERY COMMANDS, THE LAST LETTER OF A LINE ISADDED TO THE BEGINNING OF THE NEXT |IC40299 5698ISMSV 52S | |IC40450 |ULTRIUM2C FORMAT NOT LISTED IN DEVICE CONFIGURATION FORMAT LIST FOR DEVCLASS |IC40450 5698ISMSV 52W | |IC40685 |AE IC37275 FIX COMPLETION - ANR4759E RUNNING "REPAIR STGVOLS" COMMAND AGAINST |IC40685 5698ISMSV 51A | |IC40962 5698ISMSV 52A | |IC40795 |ANR9999D <.> UNABLE TO OPEN DRIVE /DEV/SMC0: ATTEMPTED TO ASSIGNSTDIN'S FILE HANDLE TO IT. |IC40795 5698ISMSV 52A | |IC40867 |REGISTER LIC. ON WINDOWS DOES NOT WORK PROPERLY IF THE LICENSE FILE IS NOT ALL IN LOWER CASE |IC40867 5698ISMSV 52W | |IC40876 |AUDIT LIBRARY DOES NOT SYNCHRONISE LIBRARY MANAGER AND LIBRARY CLIENT VOLHIST |IC40876 5698ISMSV 51A | |IC40965 |HELP SET when issued from the TSM Administrator command line in |PQ95263 5698ISMVS 520 | |IC40965 5698ISMSV 52A | |IC41006 |ITSM SERVER WEB ADMIN HAS INVALID ENTRIES INCLUDE.FS.NAS AND E |IC41006 5698ISMSV 51A | |IC41049 |AE IC39395 FIX COMPLETION: TSM SERVER MAY ABEND WHEN ASSOCIATIN |IC41049 5698ISMSV 52H | |IC41161 |ITSM SERVER "RESTORE DB" TERMINATES AFTER ANR8366E MESSAGE |IC41161 5698ISMSV 52W | |IC41173 |ANR2020E ANR0901W ITSM SERVER FAILS "RESTORE DB" DUE TO PATH |IC41173 5698ISMSV 51H | |IC41191 |DATABASE CORRUPTION REQUIRES TWO AUDITDB RUNS TO COMPLETELY |PQ92444 5698ISMVS 520 | |IC41191 5698ISMSV 51A | |PQ92333 5698ISMVS 510 | |IC41212 |DSMSERV CAN CORE DURING ANY DUEL TAPE OPERATION (INPUT/OUTPUT |IC41212 5698ISMSV 52S | |IC41306 |TSM server V5190 or 5230 may not rebind all versions of a backu |PQ92674 5698ISMVS 510 | |IC41306 5698ISMSV 51A | |PQ92706 5698ISMVS 520 | |IC41317 |"Register license file(drm.lic) number=0" does not unregister |IC41317 5698ISMSV 52A | |IC41352 |TSM Server expiration prematurely deletes last backup version |IC41352 5698ISMSV 51A | |PQ91265 5698ISMVS 510 | |IC41422 |The UPDATE STGPOOL command fails to do parameter checking |IC41422 5698ISMSV 52A | |IC41462 |Mount/Dismount hang on TSM SERVER using External Library suppor |IC41462 5698ISMSV 52H | |IC41537 |Cancel session during session terminate could cause storage age |IC41537 5698ISMSV 51A | |PQ92949 5698ISMVS 520 | |IC41558 |Under certain situations TSM 5.2 Server does not populate Sessi |PQ93127 5698ISMVS 520 | |IC41558 5698ISMSV 52A | |IC41571 |LANFREE BACKUP HANGS WHEN ITSM CLIENT SENDS VERB TO STORAGE |PQ90837 5698ISMVS 520 | |IC41571 5698ISMSV 52W | |IC41580 |IMMAP02 INCORRECT COLUMN TYPE - ITSM SERVER ABORTS IN |IC41580 5698ISMSV 52A | |PQ93111 5698ISMVS 520 | |IC41591 |ITSM SERVER I/O ERRORS DURING CONCURRENT ACCESS TO DEVICES ON |IC41591 5698ISMSV 52L | |IC41614 |ITSM SERVER FOR LINUX MAY FAIL TO DEFINE PATH TO LIBRARY, |IC41614 5698ISMSV 52L | |IC41652 |LABEL LIBVOLUME FAILS WITH ANR9999D COULD NOT OBTAIN MEDIA TYPE |IC41652 5698ISMSV 52S | |IC41656 |Define path fails for 3490 devices if AIX 5.X is 32-bit or 64-b |IC41656 5698ISMSV 52A | |IC41725 |ANR8302E I/O ERROR (OP=RSR) ON NON DLT AND LTO TAPE DRIVES |IC41725 5698ISMSV 52W | |IC41745 |DSMSERV RESTORE DB FAILS WITH ANR8417E FOR ACSLS LIBRARY |IC41745 5698ISMSV 52S | |IC41806 |STANDALONE ITSM MANAGEMENT CONSOLE CAN NOT BE UNINSTALLED, IF |IC41806 5698ISMSV 52W | |IC41837 |The Tivoli Storage Management Linux SCSI device driver can |IC41837 5698ISMSV 51L | |IC41838 |hung client if last avail mount point in use by non TSM appl |IC41838 5698ISMSV 52A | |IC41841 |ITSM server created path is missing some qualifier for |IC41841 5698ISMSV 52W | |IC41845 |ANR8402E WITH "DEFINE PATH" COMMAND FOR QIC DRIVES ON LINUX TSM |IC41845 5698ISMSV 52L | |IC41868 |AUDITDB MAY ABEND BEFORE COMPLETION DUE TO PINNED RECOVERY LOG |IC41868 5698ISMSV 52A | |PQ92235 5698ISMVS 523 | |IC42004 |ADSMSERV.MIB FILE IS MISSING FROM 5.2.X.X VERSIONS OF TSM |IC42004 5698ISMSV 52W | |IC42006 |TSM Server V5.2.X.X or higher does not work with SessionInitiat |PQ91183 5698ISMVS 520 | |IC42006 5698ISMSV 52W | |IC42050 |AUDIT VOLUME HANGS WHEN A NEGATIVE VALUE IS READ FROM VOLUME |PQ91208 5698ISMVS 522 | |IC42050 5698ISMSV 52A | |IC42075 |A device path change may be treated like a persistent WWN case |IC42075 5698ISMSV 52W | |IC42097 |TXNLOCK15 INTERNAL ERROR DETECTED RESULTS IN ITSM SERVER ABEND |IC42097 5698ISMSV 51A | |PQ93702 5698ISMVS 510 | |PQ93797 5698ISMVS 520 | |IC42202 |TSM server receives incorrect affinity id from client and may c |IC42202 5698ISMSV 52A | |PQ92231 5698ISMVS 520 | |IC42208 |AMR0595W DURING IMPORT NODE WITH FILEDATA=BACKUPACTIVE |PQ95157 5698ISMVS 520 | |IC42208 5698ISMSV 52A | |IC42214 |STORAGE VOLUME DEADLOCK INVOLVING SIMULTANEOUS WRITE |PQ92509 5698ISMVS 520 | |IC42214 5698ISMSV 51W | |IC42228 |ENHANCED VOLUME DECISION TRACEPOINTS NEEDED FOR RESTORE PROBLEM |IC42228 5698ISMSV 52A | |IC42270 |INVALID SERIAL NUMBER OBTAINED FROM DRIVE |IC42270 5698ISMSV 52W | |IC42272 |ITSM SERVER CORES IN FUNCTION "TMEND" WHEN "DEFINE CURSOR" |IC42272 5698ISMSV 52S | |IC41714 5698ISMSV 51A | |PQ92806 5698ISMVS 510 | |IC42334 |VOLLIST CAUSES STACK OVERLAY DURING CHECKOUT/CHECKIN ANR8409E |IC42334 5698ISMSV 51A | |IC42469 |SERIAL NUMBER FOR TAPE DRIVE NOT UPDATED IN DRIVE DEFINITION |IC42469 5698ISMSV 52W | |IC42490 |ITSM SERVER CORE TEC SERVER CONNECT OR DISCONNECT |IC42490 5698ISMSV 52A | |PQ95329 5698ISMVS 520 | |IC42505 |EMPTY PRIVATE VOLUME WILL RETURN TO SCRATCH AFTER AUDIT |IC42505 5698ISMSV 52W | |IC42565 |CRYPTIC MESSAGE "ANR4383E ... ITEM NOT AVAILABLE" MEANS MAXNUMM |PQ93642 5698ISMVS 510 | |IC42565 5698ISMSV 51A | |PQ93677 5698ISMVS 520 | |IC42596 |hang on HP server when External Library path incorrect |IC42596 5698ISMSV 52H | |IC42603 |DELETE VOLUME DISCARDDATA=YES MAY LEAVE ORPHANED ENTRIES IN |PQ95198 5698ISMVS 510 | |IC42603 5698ISMSV 52A | |IC42588 5698ISMSV 51A | |IC42661 |ANR8301E I/O error on TSM library 349x. |IC42661 5698ISMSV 52A | |IC42727 |ANR2032E MOVE MEDIA COMMAND FAILS WITH MESSAGE: ANR9999D |IC42727 5698ISMSV 51A | |IC42736 |TSM SERVER 5.2.3 EXPIRATION SHOWS ANR0538I AND ANR0871E |PQ96226 5698ISMVS 520 | |IC42736 5698ISMSV 52A | |IC42803 |DEADLOCK WHEN TRYING TO IMPORT HSM (SPACE MANAGED) FILES |PQ96212 5698ISMVS 520 | |IC42803 5698ISMSV 52A | |IC42806 |ITSM SERVER INITIALIZATION OF 3494 LIBRARY IS SLOW. |IC42806 5698ISMSV 52A | |IC42812 |INSTALL_SERVER SCRIPT NOT HONORING THE PREFIX VALUE DURING A |IC42812 5698ISMSV 52L | |IC42813 |TSM SERVER CRASHES DURING CANCEL SESSION IF COMMTIMEOUT AND |PQ95450 5698ISMVS 520 | |IC42813 5698ISMSV 52W | |IC42866 |GENERATE BACKUPSET MAY COPY MORE FILESPACES |PQ94360 5698ISMVS 520 | |IC42866 5698ISMSV 51P | |IC42890 |ITSM SERVER MEMORY LEAK IN IMGROUP.C WHEN ISSUING "GENERATE |IC42890 5698ISMSV 52A | |PQ95811 5698ISMVS 520 | |IC42909 |ITSM WINDOWS CLIENTS BACKING UP SYSTEM OBJECTS CAN SUFFER |PQ96732 5698ISMVS 520 | |IC42909 5698ISMSV 52S | |IC43020 |TSM SERVER CRASH DUE TO INVALID ATTEMPT TO FREE MEMORY AFTXN.C |IC43020 5698ISMSV 52A | |IC43051 |ITSM SERVER CORE DUMPS DUE TO NO QUERY RESTORE (NQR) |IC43051 5698ISMSV 52A | |PQ96369 5698ISMVS 520 | |IC43055 |MOVE DATA OFFSITE VOLUME RESTORE MSGANR1171W MSGANR1156W |PQ95261 5698ISMVS 510 | |IC43055 5698ISMSV 52A | |IC42589 5698ISMSV 51A | |IC43172 |LAN FREE RESTORE FAILS DUE TO COPY STORAGE POOL TAPE REQUEST |IC43172 5698ISMSV 52A | |PQ95626 5698ISMVS 520 | |IC43246 |AE IC42006 FIX COMPLETION. THE PROMPTED SCHEDULER FAILS, IF |PQ95843 5698ISMVS 520 | |IC43246 5698ISMSV 52W | |IC43284 |TSM CLIENT RESTORE FAILS WITH ANR1299E MESSAGE INDICATING |IC43284 5698ISMSV 52A | |IC43370 |MSGANR1763E ISSUED WHEN NO ADDITIONAL INFORMATION IS AVAILABLE |PQ96618 5698ISMVS 520 | |IC43370 5698ISMSV 52A | |IC43445 |TSM SERVER ABENDS WITH ANR7837S INTERNAL ERROR LOCKCYCLE02 |IC43445 5698ISMSV 52A | |PQ96745 5698ISMVS 520 | |IC43539 |TSM server crash during backup of NAS filesystem (TOC=YES) whic |IC43539 5698ISMSV 52S | |IC43544 |NAS Restore operation may fail to restore all files, but report |IC43544 5698ISMSV 52S | |PQ89285 |WHEN USING CURSORS, A FETCH NEXT MAY RETURN A ROW OF DATA THAT |PQ89285 5698ISMVS 520 | |PQ91745 |THE MVS SERVER ABENDED WITH 0C4 WHEN A NUMBER OF CLIENT |PQ91140 5698ISMVS 520 | |PQ91745 5698ISMVS 510 | |PQ91843 |RECEIVE MSG ANR2020E WHEN FORMAT=3590E-B, 3590E-C, 3590H-B, |PQ91843 5698ISMVS 520 | |PQ93686 |AE IC34375 FIX COMPLETION - ITSM Server 5.2.x.x CLEANUP BACKUPG |PQ93686 5698ISMVS 520 | |IC42159 5698ISMSV 52A | |PQ94503 |MVS SERVER ABENDS WITH ABENDU301 AS THE RESULT OF RUNTIME |IC42251 5698ISMSV 52A | |PQ94503 5698ISMVS 520 | APARs fixed in level 5.2.3.0 |IC35803 |TSM SERVER WIZARD W2K RSM LIBRARY ANR2004E |IC35803 5698ISMSV 51P | |IC36347 |IBM TSM Server crashes when using SET ARCHIVERETENTIONPROTECTION |IC36347 5698ISMSV 51A | |PQ88579 5698ISMVS 520 | |IC36767 |TSM EXCESSIVE ANR2997W MESSAGES LOGGED IN THE TSM ACTIVITY LOG |IC36767 5698ISMSV 51A | |PQ78095 5698ISMVS 510 | |PQ78098 5698ISMVS 520 | |IC37286 |"TAPEALERT MESSAGES" ICON IS MISSING IN THE WEB ADMIN GUI OF TS |IC37286 5698ISMSV 52A | |IC37499 |UPDATE PATH ONLINE=NO NOT HONORED FOR EXTERNAL LIBRARIES |IC37499 5698ISMSV 51A | |IC37588 |ANR2571W SCHEDULED SESSION DENIED |IC37588 5698ISMSV 51A | |PQ83106 5698ISMVS 510 | |PQ83107 5698ISMVS 520 | |IC37651 |TSM SERVER MAY RECEIVE ANR4571E MESSAGE WHEN 3494 LIBRARY IS |IC37651 5698ISMSV 51A | |IC37662 |TSM SERVER CAN NOT WRITE TO DLT SCRATCH TAPE CONTAINING |IC37662 5698ISMSV 52A | |IC37677 |THE MEDIA WAIT VALUE IN THE SUMMARY TABLE AND ACCOUNTING LOG IS |IC37677 5698ISMSV 51A | |IC37718 |TSM Server in a Clustered Environment can fail with Error: 997 |IC37718 5698ISMSV 51A | |IC37733 |ANR9999D AFMOVE.C(5399): THREADID<55> UNEXPECTED MOVETYPE 4. |PQ81719 5698ISMVS 510 | |IC37733 5698ISMSV 51W | |IC37758 |ANR8779E UNABLE TO OPEN DRIVE X, ERROR NUMBER=5 FROM STORAGE |IC37758 5698ISMSV 51Z | |IC37770 |ANR0542W MESSAGE INDICATING MEDIA INACCESSIBLE DOES NOT |PQ83546 5698ISMVS 520 | |IC37770 5698ISMSV 51A | |IC37816 |TSM SERVER MEMORY LEAK WITH DRM PREPARE & MOVE DRMEDIA COMMANDS |IC37816 5698ISMSV 51A | |IC37862 |TSM PROMPTED SCHEDULE START CAN CAUSE ANR8214E SESSION <#> |IC37862 5698ISMSV 52S | |IC37892 |ANR2047E is issued when trying to edit the TSM server options f |IC37892 5698ISMSV 52W | |IC37894 |DSMSERV_ACCOUNTING_DIR at ITSM Linux 5.2.1.x Server is not hono |IC37894 5698ISMSV 52L | |IC37985 |Tilde (~) characters in object field of Win command sched get i |IC37985 5698ISMSV 51A | |IC38087 |SERVER ABORTS TXN WITH SYSTEM ERROR WHEN NODE IS NOT AUTHORIZED |IC38087 5698ISMSV 51A | |IC38090 |TSM SERVER CORE DUMP/ABEND - ANR9999D MUTEX ACQUISITION FAILURE |PQ84431 5698ISMVS 520 | |PQ84432 5698ISMVS 510 | |IC38090 5698ISMSV 51A | |IC38105 |INACTIVE OBJECT EXPIRING WITH RETO VALUE WHEN IT IS NOT THE ONL |PQ82384 5698ISMVS 510 | |PQ82385 5698ISMVS 520 | |IC38105 5698ISMSV 51A | |IC38172 |CHECKOUT LIBVOLUME and immediate(!) CHECKIN LIBVOLUME reports A |IC38172 5698ISMSV 52A | |IC38342 |EXPORT FROM AIX, IMPORT TO W2K GIVING MISLEADING/INSUFFICIENT |IC38342 5698ISMSV 51W | |IC38347 |THE TSM SERVER 5.2.X CAN CORE DUMP IF THE RESOURCE WAITER TRIES |PQ82957 5698ISMVS 510 | |PQ82959 5698ISMVS 520 | |IC38347 5698ISMSV 52S | |IC38352 |MEANINGLESS ERRORMESSAGE IS ISSUED, WHEN DSMSERV EXPAND LOG |IC38352 5698ISMSV 51A | |PQ83789 5698ISMVS 520 | |IC38360 |ANR2327W/ANR1156W "INTERNAL SERVER ERROR DETECTED" ON OPTICAL |IC38360 5698ISMSV 51A | |IC38375 |'LABEL LIBV' FAILS FOR DEVICE CLASS WITH DEVT=GENERICTAPE WITH |IC38375 5698ISMSV 52A | |IC38376 |RUNASSERVICE is no longer a supported TSM client client option |IC38376 5698ISMSV 52W | |IC38384 |ITSM 5.2 WIZARD 3582 LTO LIBRARIES FAILS RSM ERROR |IC38384 5698ISMSV 52W | |IC38440 |ADDITIONAL DRIVES OF D/T3582 LIBRARY CAN NOT BE DEFINED TO TSM. |IC38440 5698ISMSV 52W | |IC38496 |ITSM SERVER ON PASE FAILS DURING DRIVE ALLOCATION USING USRDFN |IC38496 5698ISMSV 52P | |IC38521 |TSM Server on Windows Crashes when the TCPINFO traceflag is use |IC38521 5698ISMSV 52W | |IC38531 |MOVE MEDIA GETS ERROR ANR9999D TMLOCK.C(840): THREADID<77> |IC38531 5698ISMSV 51A | |IC38533 |TSM 5.2 Storage Agent crashes restoring tape data created by a |IC38533 5698ISMSV 52W | |IC38561 |EXCESSIVE READ ERRORS INCORRECT VOLUME PROVIDED FOR MANLIB |IC38561 5698ISMSV 51P | |IC38588 |TSM SERVER DISMOUNT FAILURE MAY LEAVE DRIVE PATH IN USE |IC38588 5698ISMSV 51S | |IC38607 |WINDOWS LABEL WIZARD USES WRONG LIBRARY FOR CHECKIN PROCESSING |IC38607 5698ISMSV 51W | |IC38634 |WHEN USING AIO, THE TSM SERVER MAY ABEND IF A WRITE REQUEST |IC38634 5698ISMSV 51A | |IC38650 |TSM EXPIRATION AND DELETE FILESPACE APPEAR TO HANG. PROCESSING |IC38650 5698ISMSV 52A | |PQ82153 5698ISMVS 522 | |IC38687 |Multipe Archives for the same nodename can fail with ANR0530W T |IC38687 5698ISMSV 52A | |IC38690 |OFFSITE VOLUMES NOT COLLOCATED AFTER RECLAMATION OCCURS |PQ85696 5698ISMVS 510 | |PQ85697 5698ISMVS 520 | |IC38690 5698ISMSV 51A | |IC38712 |USER EXIT DETAILS DO NOT DISPLAY CORRECTLY FROM WEB ADMIN |IC38712 5698ISMSV 52P | |IC38752 |Tapes in NAS storage pools may be prematurely marked full durin |IC38752 5698ISMSV 52W | |IC38781 |IMPORT NODE MERGE=YES FAILS TO MERGE AUTHORIZATION RULES |PQ86407 5698ISMVS 510 | |IC38781 5698ISMSV 51A | |IC38819 |TSM SERVER MEMORY LEAK WITH STORAGE AGENT TRANSACTION CACHE |IC38819 5698ISMSV 51A | |PQ84434 5698ISMVS 520 | |IC38828 |Add the barcode support for Dell PV122T due to the firmware |IC38828 5698ISMSV 52W | |IC38836 |TSM DEFINE PATH FILE DEVCLASS STA ALLOWS GARBAGE FOR DEVICE PAR |IC38836 5698ISMSV 52W | |IC38860 |ITSM 5.2.2 ADMIN GUI UPDATE NODE FAILS WHEN CHANGING |PQ84638 5698ISMVS 520 | |IC38860 5698ISMSV 52A | |IC38864 |TSM server crashes randomly with core dump and diag ANR9999D In |IC38864 5698ISMSV 52A | |IC38868 |ERROR IN DSMSERV.IDL AT 5.2.2 LEVEL. |PQ84355 5698ISMVS 520 | |IC38868 5698ISMSV 52A | |IC38910 |TSM Operational Reporting produces nested tables in HTML if the |IC38910 5698ISMSV 52W | |IC38911 |TSM Server is reporting Actual Start date/time for a missed cli |IC38911 5698ISMSV 52W | |IC38913 |TSM Operational Reporting text formatting issues. |IC38913 5698ISMSV 52W | |IC38957 |LANFREE RESTORE FAILS WHEN -FROMNODE USED |IC38957 5698ISMSV 52A | |IC38961 |IN A LIBRARY SHARING ENVIRONMENT, MANUALLY DEFINING TAPE VOLUME |IC38961 5698ISMSV 52A | |PQ87585 5698ISMVS 520 | |IC38985 |WEB ADMIN CLIENT ACTIVITY TO TSM SERVER CAN CAUSE SERVER CRASH |PQ84789 5698ISMVS 520 | |IC38985 5698ISMSV 52W | |IC38994 |UTILITY FOR IC38940 ADDITIONAL CORRECTIVE ACTION |IC38994 5698ISMSV 51A | |PQ84700 5698ISMVS 510 | |PQ84701 5698ISMVS 520 | |IC39032 |WRITE PROTECTION CONDITION NOT REPORTED WHITH LABEL LIBVOLUME |IC39032 5698ISMSV 51S | |IC39091 |TSM MEDIA LABELING WIZARD CAN FAIL TO PROVIDE LABEL STATUS IN |IC39091 5698ISMSV 52W | |IC39102 |ANR9999D MUTEX NOT HELD ON CONDITION WAIT, TIMING PROBLEM DELET |IC39102 5698ISMSV 51A | |IC39109 |TSM Server 5.2.X can core dump when a 'quey Status' is issued |IC39109 5698ISMSV 52A | |IC39118 |HELP DEF DEVC IN TSM 5.1.8.0 AND 5.2.1.0 DOES NOT PROVIDE THE S |IC39118 5698ISMSV 51A | |IC39121 |IBM TSM SERVER MAY OUTPUT WRONG PLATFORM IN ANR0408I & ANR0409I |PQ84343 5698ISMVS 520 | |IC39121 5698ISMSV 52W | |IC39123 |DEFINE OR UPDATE DRIVE PATH IN SPECTRALOGIC LIBR HANGS SERVER |IC39123 5698ISMSV 52S | |IC39132 |ANR0106E UNEXPECTED ERROR 2 FETCHING ROW FROM |IC39132 5698ISMSV 52A | |PQ85264 5698ISMVS 520 | |IC39141 |Generate Backupset is missing active file entries if the disk s |IC39141 5698ISMSV 51W | |IC39147 |UNDO ARCHCONVERSION - ANR9999D ATTEMPT TO DETACH THREAD NOT |IC39147 5698ISMSV 52A | |PQ86905 5698ISMVS 520 | |IC39252 |The error is that the dbLogReserve->CheckLogPinned |IC39252 5698ISMSV 51A | |PQ86752 5698ISMVS 510 | |PQ86753 5698ISMVS 520 | |IC39254 |The TSM server AUDITDB process may terminate prematurely. |IC39254 5698ISMSV 51A | |PQ85623 5698ISMVS 510 | |PQ85624 5698ISMVS 520 | |IC39262 |ITSM DEVICE DRIVER FAILS TO READ DATA LOCATED AFTER 1TB BOUNDAR |IC39262 5698ISMSV 51A | |IC39295 5698ISMSV 52A | |IC39263 |ITSM DB "MAXIMUM REDUCTION" IS ZERO AFTER ISSUING |PQ84558 5698ISMVS 520 | |IC39263 5698ISMSV 52W | |IC39266 |THE TSM SERVER COULD CRASH IF THE DISTINCT KEYWORD IS USED IN |IC39266 5698ISMSV 52W | |PQ84639 5698ISMVS 510 | |PQ84646 5698ISMVS 520 | |IC39278 |ITSM SERVER ISSUES ANR0530W MESSAGE WHEN ENCOUNTERING A |IC39278 5698ISMSV 51A | |PQ85028 5698ISMVS 520 | |IC39287 |During backup processing, an incorrect attribute is passed when |IC39287 5698ISMSV 51A | |PQ84698 5698ISMVS 510 | |PQ84699 5698ISMVS 520 | |IC39288 |TSMSVRRSC.DLL AND TSMSVRRSCEX.DLL FILES HAVE DEPENDENCIES ON |IC39288 5698ISMSV 52W | |IC39306 |DELETE FILESPACE COMMAND DOES NOT PROPERLY SHOW HOW MANY |IC39306 5698ISMSV 52W | |PQ86772 5698ISMVS 520 | |IC39314 |TSM Server core dump:ANR7837S Internal error DBOBJ028 detected. |IC39314 5698ISMSV 51P | |IC39361 |LANFREE BACKUP TO S390 SERVER CAN FAIL WITH ANR9999D FAILURE 2 |IC39361 5698ISMSV 52Z | |IC39368 |CANCEL PROCESS MAY RESULT IN CORE/ABEND OF ITSM SERVER IF THE |IC39368 5698ISMSV 52A | |PQ87504 5698ISMVS 520 | |IC39380 |ANR8770W UNABLE TO LOAD EXTERNAL LIBRARY MANAGER WITH MULTIPLE |IC39380 5698ISMSV 52W | |IC39395 |PORT SCANNER HANGS OR CRASHES TSM SERVER |IC39395 5698ISMSV 52A | |PQ87849 5698ISMVS 510 | |PQ87852 5698TSMVS 421 | |IC39396 |ANR2912E SERVER FAILS TO CONVERT OBJECT NAMES INTO HEX STRINGs |IC39396 5698ISMSV 52A | |IC39418 |LANGUAGE NOT SET BY ITSM SERVER HACMP STARTSERVER SCRIPT CAUSIN |IC39418 5698ISMSV 51A | |IC39424 |DISCREPANCY IN REPORTED VOLUME STATE: MOUNTABLEINLIB VS. |IC39424 5698ISMSV 52A | |PQ86993 5698ISMVS 520 | |IC39506 |Errors during expiration caused by self referencing objects |IC39506 5698ISMSV 52W | |IC39524 |SERVER RESTORE DB FAILS FOR FC ATTACHED DRIVES IN 3494 |IC39524 5698ISMSV 52A | |IC39542 |QUERY STGPOOL REPORTS NEGATIVE/INCORRECT ESTIMATED CAPACITY ON |IC39542 5698ISMSV 51A | |PQ87686 5698ISMVS 510 | |IC39593 |ANR0102E asalloc.c(7539): Error 1 inserting row in table "AS.Se |IC39593 5698ISMSV 52W | |IC39596 |AUDITDB MAY DELETE THE EXPIRING OBJECT ENTRIES FOR BACKUPSETS I |PQ85617 5698ISMVS 510 | |PQ85618 5698ISMVS 520 | |IC39596 5698ISMSV 51A | |IC39640 |When TSM discovers a serial number mismatch the drive is put of |IC39640 5698ISMSV 52L | |IC39654 |ANR9999D IMEXP.C: BACKUP ENTRY FOR OBJECT COULD NOT |IC39654 5698ISMSV 52A | |PQ86173 5698ISMVS 520 | |IC39668 |SEVERE DECREASE IN OVERALL PERFORMANCE OF ITSM 5.1.8 OR |IC39668 5698ISMSV 52H | |IC39681 |TSM STOPSERVER: 0403-057 SYNTAX ERROR AT LINE 44 : `<' IS |IC39681 5698ISMSV 52A | |IC39689 |(5.2.3)DRMPLANPREFIX IS DISPLAY INCORRECTLY WHEN THE PREPARE |IC39689 5698ISMSV 52W | |IC39744 |AUDIT VOLUME COMMAND PRODUCES A ANR9999D MESSAGE WHEN THE USER |IC39744 5698ISMSV 52W | |IC39782 |DELETE BACKUPSET FAILS WITH ANR2428E ERROR 2 |IC39782 5698ISMSV 52A | |PQ86336 5698ISMVS 520 | |IC39827 |Memory Leak in TSM Server 5.2.X during archive/retrieve and qu |IC39827 5698ISMSV 52A | |IC39830 |TSM SERVER SESSION ACTIVITY HANG DURING BACKUP OPERATION |IC39830 5698ISMSV 51S | |PQ87066 5698ISMVS 510 | |PQ87067 5698ISMVS 520 | |IC39839 |Set Access command can cause TSM server to crash |IC39839 5698ISMSV 52W | |PQ86939 5698ISMVS 520 | |IC39841 |ANR9999D ERROR 7 OBTAINING FILESPACE ID FOR NODEID DURING |IC39841 5698ISMSV 52W | |PQ86320 5698ISMVS 520 | |IC39849 |ANR8447E CHECKIN OF GENERICTAPE VOLUMES MISTAKENLY |IC39849 5698ISMSV 52A | |IC39931 |ANR0525W ON TSM 5.2 IMPORT FROM TSM 5.1 EXPORTED DATA |PQ86968 5698ISMVS 510 | |IC39931 5698ISMSV 52A | |IC39990 |ANR9999D DSVOL.C ERROR 2 CREATING BIT VECTOR DSK0000000032 FOR |PQ87642 5698ISMVS 523 | |IC39990 5698ISMSV 52A | |IC40022 |ITSM WEB ADMIN SLOW AFTER UPGRADE TO 5.2.X.X SERVER LEVEL. |IC40022 5698ISMSV 52L | |IC40049 |UPDATE ARCHIVE OPERATION HANGS AND FINALLY FAILS WITH ANR0538I |IC40049 5698ISMSV 52A | |PQ87566 5698ISMVS 520 | |IC40051 |ANR0454E VERIFICATION FAILURE,ANR8779E ERRNO=16, RETRY DISMOUNT |IC40051 5698ISMSV 52A | |PQ87068 5698ISMVS 520 | |IC40107 |RETRIEVING OBJECTS FROM CENTERA (DEVTYPE=CENTERA) MAY FAIL. |IC40107 5698ISMSV 52S | |IC40127 |ANR8938E Initialization failed for Shared library SCLIB01; will |IC40127 5698ISMSV 51A | |IC40142 |SELECT COMMAND INCLUDING THE ESCAPE SEQUENCE % AND SOME SPECIFI |IC40142 5698ISMSV 52W | |PQ87511 5698ISMVS 523 | |IC40165 |TSM not recognizing Unlabeled tapes in 3494 library after TSM r |IC40165 5698ISMSV 51A | |IC40193 |TSM 5.2.X server can core dump during LANfree backups |IC40193 5698ISMSV 52A | |IC40195 |ITSM ADMIN PROXY FAILS WHEN FILESPACE OBJECT NAMES INCLUDE WHIT |IC40195 5698ISMWP 510 | |IC40214 |LAN-FREE SESSIONS INCORRECTLY TERMINATED DUE TO THROUGHPUT |IC40214 5698ISMSV 52A | |PQ87603 5698ISMVS 523 | |IC40236 |Core dump with library operation after update path for IBM tape library |IC40236 5698ISMSV 52S | |IC40237 |Update path to the IBM tape drive will get the same element numbers for all the drives. |IC40237 5698ISMSV 52W | |IC40244 |WEB Admin pull down menu wrongly removes the 'label libv' command for "storage" admins |IC40244 5698ISMSV 52A | |IC40302 |TSM DEVICE DRIVER PERFORMANCE DEGRADATION ON SUN. |IC40302 5698ISMSV 52S | |IC40330 |ITSM CLIENT BACKUP FAILS ANR0104E IMBKINS.C ERROR 2 DELETING ROW FROM TABLE "EXPIRING.OBJECTS" |IC40330 5698ISMSV 52A | |PQ87485 5698ISMVS 520 | |IC40331 |DELETE FILESPACE PROCESS APPEARS TO HANG DUE TO INCORRECT REPORTING OF OBJECTS DELETED |IC40331 5698ISMSV 52A | |IC40363 |SOLARIS 5222/5223 STORAGE AGENT INSTALL/REMOVE FAILS |IC40363 5698ISMSV 52S | |IC40616 |DELETE VOLUME DISCARDDATA=YES will fail on a TSM 5.2.2.x server orphan bitfiles are exist. |IC40616 5698ISMSV 52W | |PQ88049 5698ISMVS 520 | |IC40628 |DURING AUDITDB ERROR OCCURED AND AUDIT FAILS: ANR9999D IMAUDIT.C(769): THREADID<0> AUDIT OF ONE OR MORE SECONDARY TABLES FAILED |IC40628 5698ISMSV 52W | |PQ88044 5698ISMVS 520 | |IC40665 |ANR0104E and Error 2 from imgroup.c when deleting table from "Group.Members2" |PQ88291 5698ISMVS 520 | |IC40665 5698ISMSV 52W | |IC40705 |IMPORT NODE CAUSES TSM SERVER TO CRASH WITH FREE MEMORY ERRORS |PQ88843 5698ISMVS 520 | |IC40705 5698ISMSV 52A | |IC40866 |ITSM DEVICE DRIVER INSTALL FAILS ON HP-UX WHEN LOADING DRIVER INTO KERNEL |IC40866 5698ISMSV 52H | |IC40959 |CHECKIN LIBVOLUME FAILS WITH ANR8314E - LIBRARY FULL |IC40959 5698ISMSV 52S | |PQ83450 |ANR4759E REPAIR STGVOL UTILITY LOOP |PQ83450 5698ISMVS 520 | |IC39402 5698ISMSV 51A | |PQ84702 5698ISMVS 510 | |PQ84418 |EXPORT/IMPORT ADMIN SESSIONS CANNOT BE CANCELLED |IC41429 5698ISMSV 52A | |PQ84418 5698ISMVS 520 | |PQ84954 |MEMORY LEAK ON VOLLIST ENTRIES RUNNING RECLAMATION |PQ84954 5698ISMVS 510 | |IC40005 5698ISMSV 51A | |PQ86540 5698ISMVS 520 | |PQ85002 |ANE MESSAGES CREATED BY NETVIEW RECEIVER DO NOT INCLUDE |PQ85002 5698ISMVS 510 | |PQ85040 |"ANR9999D PVROPDEL(282): ... DevClass 11 (driver 8) not support |PQ85040 5698ISMVS 520 | |PQ85063 |MVS SERVER ABEND0C4 WHEN USING GUI CLIENT TO REQUEST |PQ85063 5698ISMVS 520 | |PQ85160 |DELETE ARCHIVE CAUSES POOR PERFORMANCE/HIGH CPU UTIL |IC39651 5698ISMSV 52A | |PQ85160 5698ISMVS 520 | |PQ85357 |MULTIPLE ANR1173E DURING OFF-SITE RECLAMATION |IC36348 5698ISMSV 51A | |PQ85357 5698ISMVS 510 | |PQ88108 5698ISMVS 523 | |PQ85665 |UNABLE TO RESTORE TDP FOR ORACLE LANFREE FROM Z/OS. |PQ85665 5698ISMVS 520 | |PQ86959 |ABEND0C4 RESTARTING 5.1.9.0 SERVER AFTER RUNNING REPAIR STGVOL |PQ87962 5698ISMVS 520 | |PQ86959 5698ISMVS 510 | |IC40498 5698ISMSV 51A | APARs fixed in level 5.2.2.0 |IC35579 |CHECKOUT LIBVOL TIMEOUT FAILURE ACSLS RETURNS JUNK DATA |IC35579 5698ISMSV 51A | |IC35615 |(518,52x) WEB aDMIN GETS "ERROR 404 PAGE NOT FOUND" WHEN TRYING |IC35615 5698ISMWP 510 | |IC35765 |SELECT DRMEDIA IS STARTING BUT NOT ENDING EXTERNAL LIBRARY MGR |IC37227 5698ISMSV 51A | |IC35765 5698ISMSV 52A | |IC36154 |DEFINE BACKUPSET W/ DEVCLASS REMOVABLEFILE TO TSM SERVER ERRORS |IC36154 5698ISMSV 51W | |IC36183 |TSM DSMCAD RUNS SCHEDULE AFTER SCHEDULE DURATION WINDOW HAS EXP |PQ76553 5698ISMVS 510 | |IC36183 5698ISMSV 51A | |IC36205 |MOVE NODEDATA MULTI-PROCESSES CAN WAIT FOR THE SAME OUTPUT |IC36205 5698ISMSV 52A | |IC36279 |64 BIT TSM DEVICE DRIVER'S FAILING ON 32 BIT AIX KERNEL |IC36279 5698ISMSV 51A | |IC36292 |(5.1.8,5.2.1)SNMP MSG STRINGS FORMAT CHANGED BTWN 5152 & 5164 |IC36292 5698ISMSV 51A | |PQ76326 5698ISMVS 520 | |IC36328 |MOUNT REQUEST FOR VOLUME FAILS SILENTLY |IC36328 5698ISMSV 51A | |IC36395 |DELETE LIBRARY LIBTYPE ACSLS APPEARS TO HANG WITH LONG WAIT |IC36395 5698ISMSV 51A | |IC36439 |ANR8442E MESSAGE GENERATED ERRONEOUSLY DURING CHECKIN LIBVOL |IC36439 5698ISMSV 51S | |IC36478 |BACK UP OF A HSM MIGRATED FILE TO A STORAGEPOOL WITH SIMULTANEO |PQ76543 5698ISMVS 510 | |IC36478 5698ISMSV 51A | |IC36499 |MOVE NODEDATA REPORTS SUCCESS WITH O BYTES TRANSFERRED |PQ77326 5698ISMVS 510 | |IC36499 5698ISMSV 51A | |IC36508 |DEF VOL FOR LARGE DISK VOL (200+GIG) FAIL WITH ANR7820W |IC37162 5698ISMSV 52W | |IC36508 5698ISMSV 51W | |IC36540 |TSM SERVER CAN CRASH IF A SQL SELECT STATEMENT IS ISSUED THAT |PQ76055 5698ISMVS 510 | |IC36540 5698ISMSV 51W | |IC36560 |TSM Server core dumps when the ACSLS is being traced with pvr m |IC36560 5698ISMSV 51S | |IC36561 |TSM Server not utilizing the CAP properly during volume checkou |IC36561 5698ISMSV 51S | |IC36566 |THE TSM 5.X SERVER MAY GENERATE "INVALID FORMAT CODE" ERRORS |IC36566 5698ISMSV 51A | |IC36575 |QUERY PROCESS BEHAVIOR AFTER APAR IC34754 WAS FULLY |IC36575 5698ISMSV 51W | |IC36581 |TSM SERVER CORE DUMP USING THE TRACEFLAG "THREAD". |IC36581 5698ISMSV 51A | |IC36590 |EXPORT NODE FAILS RESOURCE TIMEOUT ORPHANED TRANSACTIONS |IC36590 5698ISMSV 51A | |PQ77415 5698ISMVS 510 | |IC36594 |AUDITDB WITH DETAIL=YES, CHANGES ALL 'ONETIME' SCHEDULES TO |IC36594 5698ISMSV 51W | |IC36597 |TSM SERVER IS COREDUMPING DURING UNLOAD DB PROCESS |PQ77742 5698ISMVS 510 | |PQ77743 5698ISMVS 520 | |IC36597 5698ISMSV 51S | |IC36609 |TSM SERVER CRASHES DURING AUDIT VOLUME IF THERE IS AN AGGREGATE |IC36609 5698ISMSV 51W | |PQ77610 5698ISMVS 510 | |PQ77612 5698ISMVS 520 | |IC36613 |QUERY SCRIPT COMMAND WITH FORMAT=RAW CORES TSM SERVER ON SOLARI |IC36613 5698ISMSV 51S | |IC36616 |ANR8302E MSG IS INAPPROPRIAT FOR TSM 5.1.X, REFERS TO DEVICE |IC36616 5698ISMSV 51W | |IC36619 |AUDITDB Process Terminates with Error |IC36619 5698ISMSV 51W | |IC36636 |THE 5.1.5.X TSM SERVER IS UNABLE TO RECONIGNIZE THE |IC36636 5698ISMSV 51W | |IC36651 |Cancelling a lanfree session that is performing a restore or |IC36651 5698ISMSV 52A | |IC36653 |The TSM server may abend when waiters exist for a volume that |IC36653 5698ISMSV 51W | |IC36660 |TSM SERVER CORES WITH SEGMENTATION VIOLATION WHEN CLIENT SESSIO |IC36660 5698ISMSV 51A | |IC36662 |ANR2056E TSM WHEN ATTEMPTING TO DELETE AN INVALID CLIENTOPT |IC36662 5698ISMSV 51A | |IC36675 |External library support is now included in the ITSM Server for |IC36675 5698ISMSV 52L | |IC36706 |Out of space in DISK storage pool with CACHE=YES even though |PQ76572 5698ISMVS 510 | |PQ76573 5698ISMVS 520 | |IC36706 5698ISMSV 52A | |IC36730 |TSM SERVER CRASH WHEN "DELETE STGPOOL" COMMAND IS ISSUED AND |IC36730 5698ISMSV 51A | |PQ78991 5698ISMVS 520 | |IC36747 |UNABLE TO DEFINE A DELL POWERVAULT 128T LIBRARY TO TSM. |IC36747 5698ISMSV 51W | |IC36763 |TSM SERVER CREATING TAPE VOLUMES WITH WRONG BLOCKSIZE VALUE IN |IC36763 5698ISMSV 51A | |IC36766 |TSM SERVER MAY CRASH DURING CLIENT BACKUP/ARCHIVE OPERATIONS |PQ77609 5698ISMVS 520 | |PQ77103 5698ISMVS 510 | |IC36766 5698ISMSV 51A | |IC36790 |TSM VIRTUAL VOLUMES DO NOT EXPIRE AFTER IMPORT SERVER. SERVER |PQ77094 5698ISMVS 510 | |PQ77095 5698ISMVS 520 | |IC36790 5698ISMSV 51A | |IC36798 |PLASMON M SERIES LIBRARIES (M20/M32/M52) HAVE CHANGED STARTING |IC36798 5698ISMSV 51W | |IC36814 |SERVER CRASH WITH Q PROC AND LARGE EXPORT JOBS (SYMPTOM AS |PQ77111 5698ISMVS 520 | |IC36814 5698ISMSV 51A | |IC36819 |GENERATE BACKUPSET WITH WAIT=YES PREVENTS TSM CLIENT FROM |PQ77686 5698ISMVS 522 | |PQ77697 5698ISMVS 520 | |PQ77754 5698ISMVS 522 | |IC36819 5698ISMSV 51A | |IC36820 |ANR3605E AND ANR0479W SERVER MESSAGES FOR STA SESSIONS CANCELED |IC36820 5698ISMSV 51A | |IC36826 |ANR MSGANR2032E OCCURS WHEN ATTEMPTING TO DELETE A DRIVE |IC36826 5698ISMSV 51P | |IC36827 |ANR8366E UPDATE FILE DEVCLASS LIBRARY PARAMETER |IC36827 5698ISMSV 51S | |IC36876 |AIX TSM Server memory limitation |IC36876 5698ISMSV 52A | |IC36946 |TSM SERVER HANGS ON "DEFINE/UPDATE PATH" COMMAND WHEN OTHER |IC36946 5698ISMSV 51S | |IC36963 |Storage agent aborts when no scratch volumes are available. |IC36963 5698ISMSV 51Z | |IC36975 |SIMULTANEOUS WRITE OPERATIONS FAIL WITH ANR0102E , DS.SEGMENTS. |IC36975 5698ISMSV 51S | |PQ79263 5698ISMVS 510 | |PQ79264 5698ISMVS 520 | |IC36981 |TSM SERVER MAY ABEND WHEN NO-QUERY RESTORE FINISHES |IC36981 5698ISMSV 51A | |PQ78096 5698ISMVS 510 | |IC37042 |TSM GRESHAM ELM ANR9999D MMSEXT.C ERROR READING FROM EXIT RC = |IC37042 5698ISMSV 51A | |IC37071 |STORAGE AGENT /ETC/INITTAB ENTRY PREVENTS LOGIN TO CONSOLE - |IC37071 5698ISMSV 51S | |IC37074 |ANR1859W GENERATED ON TSM STORAGE AGENT WHEN VALIDATEPROTOCOL= |IC37074 5698ISMSV 51A | |IC37080 |TSM SERVER CAN CORE DUMP WHEN LONG RUNNING TSM ADMIN SESSION IS |PQ77744 5698ISMVS 510 | |PQ77745 5698ISMVS 520 | |IC37080 5698ISMSV 51A | |IC37083 |'RESTORE STGPOOL PREVIEW=YES' OUTPUT INCORRECT AS COMPARED TO |IC37083 5698ISMSV 51A | |PQ79851 5698ISMVS 520 | |IC37093 |CLEAN DRIVE COMMAND FAILS ON HP 4MM LIBRARIES WITH ANR8943E |IC37093 5698ISMSV 51S | |IC37166 |Upgradedb fails from V5.1.7.0 to V5.2.0.1 |IC37166 5698ISMSV 51A | |IC37171 |The COPYCONTINUE=YES may not be honored during |IC37171 5698ISMSV 51A | |PQ77813 5698ISMVS 510 | |IC37172 |TSM SERVER CRASH EXPORT SERVER WITH MANY OR LARGE |IC37172 5698ISMSV 51A | |PQ78239 5698ISMVS 510 | |PQ78240 5698ISMVS 520 | |IC37209 |DOCUMENTATION ON HOW TO CONFIGURE NATIVE SUN FC HBAS IS MISSING |IC37209 5698ISMSV 51S | |IC37236 |TSM Administrative Client reports server or storage agent |IC37236 5698ISMSV 52A | |PQ79265 5698ISMVS 520 | |IC37249 |RESTORE DB FAILS WITH: MUTEX ACQUISITION FAILURE, ERRNO=22: |IC37249 5698ISMSV 52A | |IC37254 |SPECTRA LOGIC GATOR LIBRARIES PERFORM SERIALIZED DISMOUNT AND |IC37254 5698ISMSV 51S | |IC37275 |CLEANUP UTILITY TO REMOVE ORPHANED ENTRIES INTODUCED BY IC36975 |IC37275 5698ISMSV 51A | |IC37279 |TSM Summary table START_TIME values may be incorrect |PQ78952 5698ISMVS 510 | |IC37279 5698ISMSV 51S | |IC37289 |INTERNAL SERVER ERROR DETECTED RESERVED MOUNT POINT LIBTYPE |IC37289 5698ISMSV 52S | |IC37312 |DEFAULT VALUES FOR 'COMPRESSION' AND 'VALIDATEPROTOCOL' MUST BE |PQ81220 5698ISMVS 520 | |IC37312 5698ISMSV 52A | |IC37346 |MEMORY LEAK ON TSM SERVER RESULTING FROM NO-QUERY RESTORES |PQ78732 5698ISMVS 510 | |PQ78733 5698ISMVS 520 | |IC37346 5698ISMSV 51A | |IC37350 |RECONCILE VOLUMES COMMAND RESETS OBJECTS TO BE DELETED DURING |IC37350 5698ISMSV 51A | |PQ78928 5698ISMVS 510 | |PQ78929 5698ISMVS 520 | |IC37420 |ISSUING MOVE DRMEDIA WHERESTATE=MOUNT TOSTATE=VAULT |PQ80965 5698ISMVS 510 | |PQ80968 5698ISMVS 520 | |IC37420 5698ISMSV 51A | |IC37437 |THIS IS IN REFERENCE TO DEFECT 11278 |PQ79713 5698ISMVS 520 | |PQ79714 5698ISMVS 510 | |IC37437 5698ISMSV 51A | |IC37446 |ANR1552W MESSAGE TEXT AND EXPLANATION IS UNCLEAR |IC37446 5698ISMSV 52A | |IC37455 |COUNTING OF DATABASE PAGES BACKED UP FOR A DB SNAPSHOT IS |IC37455 5698ISMSV 51Z | |PQ78999 5698ISMVS 520 | |IC37554 |TSM SERVER MAY ALLOW UNAUTHORIZED ACCESS TO SERVER VIA A CONSOL |PQ79590 5698ISMVS 520 | |PQ79835 5698TSMVS 421 | |IC37554 5698ISMSV 52A | |IC37571 |SSI.51 DOES NOT USE THE VALUE SET FOR SSI_HOSTNAME VARIABLE |IC37571 5698ISMSV 51A | |IC37575 |TSM LTO LIBRARY 5.2 CHANGER0 IS NOT RECOGNIZED BY WINDOWS RSM |IC37575 5698ISMSV 52W | |IC37589 |ANR9999D ERROR DELETING OBJECT UPGRADEDB |IC37589 5698ISMSV 52S | |PQ80082 5698ISMVS 520 | |IC37642 |ELEMENT=AUTODETECT IS NOT SUPPORTED IN DEFINE DRIVE/ DEFINE PAT |IC37642 5698ISMSV 52H | |IC37694 |TSM 5.2 SOLARIS SERVER CORE DUMPS IF INCORRECT "RESET PASSEXP" |IC37694 5698ISMSV 51A | |IC37709 |THE SSI EXECUTABLE SUPPLIED WITH TSM CAN COREDUMP WHEN UNLIMITE |IC37709 5698ISMSV 51A | |IC37738 |TSM CLIENT UNABLE TO RESTORE DATA FROM TSM 5.1.7.0 SERVER. |IC38316 5698ISMSV 52A | |PQ80581 5698ISMVS 510 | |PQ80582 5698ISMVS 520 | |IC37738 5698ISMSV 51A | |IC37746 |After upgrading to TSM server 5.2, the port used by TSM for adm |IC37746 5698ISMSV 52W | |IC37749 |TSM 5.2 Storage Agents terminate Signal 11 with drive cleaning |IC37749 5698ISMSV 52S | |IC37779 |TOC does not load the info for a Expired Image. |IC37779 5698ISMSV 52S | |IC37792 |ITSM 5.2.x: Trailing blank after SESSIONINITIATION parameters " |IC37792 5698ISMSV 52A | |IC37821 |IMPORT NODE merge=yes cmd in TSM 5.2 sets DEACTIVATE_DATE wrong |IC37821 5698ISMSV 52S | |IC37866 |MOUNTLIMIT NOT HONORED IN NON PARTITIONED MIXED MEDIA IBM3584 |IC37866 5698ISMSV 52A | |IC37877 |TSM SERVER MEMORY USE CONTINUALLY INCREASING AND MAY CRASH TSM |IC37877 5698ISMSV 52W | |IC37911 |ANR9999D PKTHREAD.C(636): THREADID<13> THREAD CREATION |IC37911 5698ISMSV 52L | |IC37993 |TSM LANFREE PATH IS NOT USED BY CLIENT BACKUPS, DESPITE |PQ80380 5698ISMVS 520 | |IC37993 5698ISMSV 52W | |IC38011 |DEVTYPE=VOLSAFE DOES NOT WORK WHEN USING AN EXTERNAL LIBRARY |IC38011 5698ISMSV 52A | |IC38012 |TSM SERVER MAY WITNESS A MEMORY LEAK IF A NAMED PIPES SESSION |IC38012 5698ISMSV 51W | |IC38016 |NOQUERY restore does not restore drive permissions. |IC38016 5698ISMSV 51A | |IC38060 |ORPHANED TRANSACTION AND MEMORY LEAK WITH ITSM SERVER WHEN |IC38060 5698ISMSV 51A | |PQ80908 5698ISMVS 510 | |PQ80909 5698ISMVS 520 | |IC38063 |MSGANR1092W CAN OCCUR IF ALL DRIVES DEFINED TO LIB MANAGER |IC38063 5698ISMSV 52A | |IC38101 |ANR8311E AN I/O ERROR OCCURRED WHILE ACCESSING DRIVE XXX |IC38101 5698ISMSV 51A | |IC38177 |SERVER MAY COREDUMP WHILE RUNNING RECLAMATION AND EXPIRATION AT |PQ80926 5698ISMVS 510 | |IC38177 5698ISMSV 51A | |IC38449 |A define backupset command may fail with message ANR2405E |IC38449 5698ISMSV 52A | |IC39525 |"CURRENT VOLUME LIST" OF Q PROC ERRONEOUSLY GROWING WHILE |IC39525 5698ISMSV 52A | |IC39585 |REGISTER LICENSE IS RELYING ON THE OS SYSTEM DATE / TIME |IC39585 5698ISMSV 52A | |IC39640 |When TSM discovers a serial number mismatch the drive is put of |IC39640 5698ISMSV 52L | |IC39877 |IMPORT OF NODE FILEDATA RESULTS IN ANR9999D BACKUP OBJECT |PQ88811 5698ISMVS 520 | |IC39877 5698ISMSV 52S | |IC39881 |ANR9999D ATTEMPT TO RECOVER VOLUME HANDLE FOR OPEN VOLUME |IC39881 5698ISMSV 52W | |IC39957 |DELETE FILESPACE RETURNS SUCCESS BUT FILESPACE STILL |IC39957 5698ISMSV 52A | |PQ87176 5698ISMVS 520 | |IC39966 |ANR9999D ASVOLACQ.C INVALID STATE CHANGE FOR VOLUMES USED BY |IC39966 5698ISMSV 52A | |IC40252 |RESTARTABLE RESTORE SESSION EXISTS AFTER SUCCESSFUL LAN-FREE NO-QUERY RESTORE |IC40252 5698ISMSV 52A | |PQ88810 5698ISMVS 520 | |IC40384 |RESTORE DB USING DEVT OPTICAL / WORM FAILS WITH ANR8362E |PQ87670 5698ISMVS 523 | |IC40384 5698ISMSV 52A | |IC40450 |ULTRIUM2C FORMAT NOT LISTED IN DEVICE CONFIGURATION FORMAT LIST FOR DEVCLASS |IC40450 5698ISMSV 52W | |IC40528 |ANR0488W SESSIONS INCORRECTLY CANCELLED PRIOR TO REACHING THROUGHPUTDATATHRESHOLD |PQ87944 5698ISMVS 520 | |IC40528 5698ISMSV 51A | |PQ87799 5698ISMVS 510 | |IC40645 |NORETRIEVEDATE OPTION IS NOT DISPLAYED IN QUERY OPTION OUTPUT |IC40645 5698ISMSV 52A | |PQ88451 5698ISMVS 523 | |IC40678 |ANR0985I BACKUP STORAGE POOL PROCESS COMPLETES SUCCESSFULLY DESPITE MOUNT |IC40678 5698ISMSV 52A | |IC40684 |UPGRADE OF STORAGE AGENT ON WINDOWS OVERWRITES DSMSTA.OPT |IC40684 5698ISMSV 52W | |IC40708 |TSM BACKUP DB COMMAND FAILS WITH ANR4571E WHEN DTF DEVCLASS IS USED WITH FORMAT=DTF2 OR DTF2C. |IC40708 5698ISMSV 52S | |IC40757 |Define Profassoc is not working correctly when Server=* |PQ89205 5698ISMVS 510 | |PQ89172 5698ISMVS 520 | |IC40757 5698ISMSV 52W | |IC40788 |INCORRECTLY ISSUED ANR4073I AUDITDB: INVALID FILE AGGREGATION INFORMATION |PQ88661 5698ISMVS 520 | |IC40788 5698ISMSV 52A | |IC40851 |TSM SERVER WEB ADMIN GUI / REGISTER NODE/ CLOPTSET HAS NO "BLANKOPTION" TO SELECT. |IC40851 5698ISMSV 52A | |IC40865 |ANR2400E DURING DELETE VOLHIST WHEN VOLUME TYPE REMOTE. |IC40865 5698ISMSV 52A | |IC40949 |ANR0444W PROTOCOL VIOLATION DURING SERVER-SERVER |PQ90436 5698ISMVS 520 | |IC40949 5698ISMSV 52A | |IC41015 |EXPIRATION FAILING FOR WINDOWS NODES ON TSM SERVER |IC41015 5698ISMSV 52A | |PQ90443 5698ISMVS 520 | |IC41045 |WEB CLIENT GUI BASED NAS NDMP FILE LEVEL RESTORE OF FOLDER |IC41045 5698ISMSV 52W | |IC41064 |Update of node or admin password can result in password being p |IC41064 5698ISMSV 52W | |IC41080 |ITSM STORAGE AGENT INTERRUPTING VOLUME MOUNT BY ITSM SERVER |IC41080 5698ISMSV 52W | |PQ89308 5698ISMVS 520 | |IC41235 |ANR0546W - internal server error on a restore when mount wait t |IC41235 5698ISMSV 52A | |PQ90565 5698ISMVS 520 | |IC41236 |Unable to use owner option of "checkin libvol" from Web Admin C |IC41236 5698ISMSV 52W | |IC41240 |TSM DEVICE SUPPORT FOR STK SN6000 EMULATING STK 9840 TAPE DRIVE |IC41240 5698ISMSV 52H | |IC41291 |ANR8855E ITSM SERVER FAILS CHECKIN FOR ACSLS VOLUME STATING |IC41291 5698ISMSV 52S | |IC41312 |SERVER ABENDS WITH ANR8213E (SOLARIS) SESSION ABOR |PQ89973 5698ISMVS 510 | |IC41312 5698ISMSV 51S | |IC41393 |ANR2715E AFTER UPDATE NODE WITH |PQ90188 5698ISMVS 520 | |IC41393 5698ISMSV 52S | |IC41460 |SOLARIS ITSM 5.1: KERNAL PANIC, MULTI-CPU ENVIRONMENT, CAUSED B |IC41460 5698ISMSV 51S | |PQ73384 |USING WEB ADMIN TO ADJUST BUFPOOLSIZE FAILS WITH MSGANR2020E |IC37163 5698ISMSV 51A | |PQ73384 5698ISMVS 510 | |PQ77741 5698ISMVS 511 | |PQ74605 |(5.1.9, 5.2.2)MSGDM0001S TBUTIL INTERNAL ERROR TBINS068 |IC37542 5698ISMSV 51A | |PQ78943 5698ISMVS 520 | |PQ74605 5698ISMVS 510 | |PQ74682 |TSM WEB ADMINISTRATOR DISPLAYS INCREMENTAL BACKUP WHEN |PQ74682 5698ISMVS 510 | |PQ74849 |UPGRADEDB FROM 4.2.X TO 5.1.X INVALID NODEID FSID SYSTEM OBJECT |IC37079 5698ISMSV 51A | |PQ74849 5698ISMVS 511 | |PQ76908 |GARBAGE CHARACTERS IN WEB ADMIN SCREENS FOR SOME TITLE AND |PQ76908 5698ISMVS 510 | |PQ77017 |ABEND 0C4 AFMOVEOFFSITEVOLUME MOVE DATA WAIT=YES |PQ77017 5698ISMVS 510 | |PQ77841 |ANRALLOC SPIN LOCK LOOP ACQUIRING MEMORY LOCK |PQ77841 5698ISMVS 510 | |PQ79268 |ANR5352E when proccessing EOV for ECARTRIDGE and 3592 devclass |PQ79268 5698ISMVS 520 | |PQ80211 |SEVERE PERFORMANCE DEGRADATION UPGRADING TO 5.2 FROM 4.2 OR 5.1 |IC38013 5698ISMSV 52A | |PQ80211 5698ISMVS 520 | |PQ87629 |ANR0512I - ITSM SERVER ASSOCIATES INCORRECT PROCESS ID ON VOLUME ACTIVITY MESSAGES IN ACTIVITY LOG |IC40489 5698ISMSV 52A | |PQ87629 5698ISMVS 520 | |PQ90370 |ALLOWING TCPADMINPORT OPTION TO DEFAULT TO PORT 1500 MAY |PQ90370 5698ISMVS 520 | APARs fixed in level 5.2.1.0 IC34520 IN AN HACMP ENV, TSM 5.1 NOT RELEASING RESOURCES IN FAILOVER ### Sysroutes for APAR ### IC34520 5698ISMSV 51A IC34797 5698TSMAX 420 IC35402 (GA+,5.1.8)ACCESS MODE FOR VOLUME SET TO "UNAVAILABLE" ### Sysroutes for APAR ### IC35402 5698ISMSV 51A IC35524 CHECKOUT LIBVOL CHECKLABEL=NO REMOVE=NO FAILS ANR8437E ### Sysroutes for APAR ### IC35524 5698ISMSV 51A IC35615 (518,52x) WEB aDMIN GETS "ERROR 404 PAGE NOT FOUND" WHEN TRYING ### Sysroutes for APAR ### IC35615 5698ISMWP 510 IC35728 SET DRMPRIM THROUGH WEB ADMIN DOES NOT ACCEPT MORE THAN 50 ### Sysroutes for APAR ### PQ77735 5698ISMVS 521 IC35728 5698ISMSV 51A IC37160 5698ISMSV 51W IC35765 SELECT DRMEDIA IS STARTING BUT NOT ENDING EXTERNAL LIBRARY MGR ### Sysroutes for APAR ### IC37227 5698ISMSV 51A IC35765 5698ISMSV 52A IC35809 CACHE HIT PCT MAY INCORRECTLY REPORT GREATER THAN 100% ### Sysroutes for APAR ### IC35809 5698TSMAX 420 IC35896 TSM DOES NOT HONOR "UPDATE SCHEDULE" WITHIN A RUNNING SCHEDULE ### Sysroutes for APAR ### IC35896 5698ISMSV 51W IC36154 DEFINE BACKUPSET W/ DEVCLASS REMOVABLEFILE TO TSM SERVER ERRORS ### Sysroutes for APAR ### IC36154 5698ISMSV 51W IC36183 TSM DSMCAD RUNS SCHEDULE AFTER SCHEDULE DURATION WINDOW HAS EXP ### Sysroutes for APAR ### PQ76553 5698ISMVS 510 IC36183 5698ISMSV 51A IC36292 (5.1.8,5.2.1)SNMP MSG STRINGS FORMAT CHANGED BTWN 5152 & 5164 ### Sysroutes for APAR ### IC36292 5698ISMSV 51A PQ76326 5698ISMVS 520 IC36367 tSM AUDIT DB AND LOAD DB FAIL EXCEPTION CODE: C0000005 ACCESS_V ### Sysroutes for APAR ### PQ77687 5698ISMVS 510 PQ77694 5698ISMVS 520 IC36367 5698ISMSV 51W IC36385 TSM LIBRARY HANG CAUSED BY MICROCODE BUG INCORRECT DRIVE ### Sysroutes for APAR ### IC36385 5698ISMSV 51A IC36444 5698ISMSV 51H IC36445 5698ISMSV 51L IC36446 5698ISMSV 51S IC36447 5698ISMSV 51W IC36386 (GA+)TSM SERVER TO SERVER HANG / DEaDLOCK CAUSED BY NOT RELE ### Sysroutes for APAR ### IC36386 5698ISMSV 51A IC36460 (5.2.1) SELECT FROM NODES TABLE MAY YIELD INCORRECT OUTPUT, ### Sysroutes for APAR ### PQ77688 5698ISMVS 520 IC36460 5698ISMSV 51A IC36499 MOVE NODEDATA REPORTS SUCCESS WITH O BYTES TRANSFERRED ### Sysroutes for APAR ### PQ77326 5698ISMVS 510 IC36499 5698ISMSV 51A IC36508 DEF VOL FOR LARGE DISK VOL (200+GIG) FAIL WITH ANR7820W ### Sysroutes for APAR ### IC37162 5698ISMSV 52W IC36508 5698ISMSV 51W IC36510 STORAGE AGENT SESSIONS IN RUN STATE DO NOT CLEAR EVEN WITH ### Sysroutes for APAR ### IC36510 5698ISMSV 51Z IC36540 TSM SERVER CAN CRASH IF A SQL SELECT STATEMENT IS ISSUED THAT ### Sysroutes for APAR ### PQ76055 5698ISMVS 510 IC36540 5698ISMSV 51W IC36560 TSM Server core dumps when the ACSLS is being traced with pvr m ### Sysroutes for APAR ### IC36560 5698ISMSV 51S IC36566 THE TSM 5.X SERVER MAY GENERATE "INVALID FORMAT CODE" ERRORS ### Sysroutes for APAR ### IC36566 5698ISMSV 51A IC36581 TSM SERVER CORE DUMP USING THE TRACEFLAG "THREAD". ### Sysroutes for APAR ### IC36581 5698ISMSV 51A IC36597 TSM SERVER IS COREDUMPING DURING UNLOAD DB PROCESS ### Sysroutes for APAR ### PQ77742 5698ISMVS 510 PQ77743 5698ISMVS 520 IC36597 5698ISMSV 51S IC36609 TSM SERVER CRASHES DURING AUDIT VOLUME IF THERE IS AN AGGREGATE ### Sysroutes for APAR ### IC36609 5698ISMSV 51W PQ77610 5698ISMVS 510 PQ77612 5698ISMVS 520 IC36613 QUERY SCRIPT COMMAND WITH FORMAT=RAW CORES TSM SERVER ON SOLARI ### Sysroutes for APAR ### IC36613 5698ISMSV 51S IC36619 AUDITDB Process Terminates with Error ### Sysroutes for APAR ### IC36619 5698ISMSV 51W IC36636 THE 5.1.5.X TSM SERVER IS UNABLE TO RECONIGNIZE THE ### Sysroutes for APAR ### IC36636 5698ISMSV 51W IC36651 Cancelling a lanfree session that is performing a restore or ### Sysroutes for APAR ### IC36651 5698ISMSV 52A IC36653 The TSM server may abend when waiters exist for a volume that ### Sysroutes for APAR ### IC36653 5698ISMSV 51W IC36675 External library support is now included in the TSM Server for ### Sysroutes for APAR ### IC36675 5698ISMSV 52L IC36678 TSM SERVER 5.1.7.0 DOES NOT POLL DRIVE INDEFINITELY IN ### Sysroutes for APAR ### IC36766 TSM SERVER MAY CRASH DURING CLIENT BACKUP/ARCHIVE OPERATIONS ### Sysroutes for APAR ### PQ77609 5698ISMVS 520 PQ77103 5698ISMVS 510 IC36766 5698ISMSV 51A IC36767 TSM EXCESSIVE ANR2997W MESSAGES LOGGED IN THE TSM ACTIVITY LOG ### Sysroutes for APAR ### IC36767 5698ISMSV 51A IC36790 TSM VIRTUAL VOLUMES DO NOT EXPIRE AFTER IMPORT SERVER. SERVER ### Sysroutes for APAR ### PQ77094 5698ISMVS 510 PQ77095 5698ISMVS 520 IC36790 5698ISMSV 51A IC36798 PLASMON M SERIES LIBRARIES (M20/M32/M52) HAVE CHANGED STARTING ### Sysroutes for APAR ### IC36798 5698ISMSV 51W IC36814 SERVER CRASH WITH Q PROC AND LARGE EXPORT JOBS (SYMPTOM AS ### Sysroutes for APAR ### PQ77111 5698ISMVS 520 IC36814 5698ISMSV 51A IC36845 TSM startserver script missing closing bracket ### Sysroutes for APAR ### IC36845 5698ISMSV 51A IC36876 AIX TSM Server memory limitation ### Sysroutes for APAR ### IC36876 5698ISMSV 52A IC36963 Storage agent aborts when no scratch volumes are available. ### Sysroutes for APAR ### IC36963 5698ISMSV 51Z IC37052 NDMP Restore of a Celerra file server which involves a Full ### Sysroutes for APAR ### IC37052 5698ISMSV 52W IC37107 QUERY TOC of a Network Appliance filesystem may not display ### Sysroutes for APAR ### IC37107 5698ISMSV 52L IC37109 ANR9999D Buffer overrun detected while freeing memory; called ### Sysroutes for APAR ### IC37109 5698ISMSV 52L IC37171 The COPYCONTINUE=YES may not be honored during ### Sysroutes for APAR ### IC37171 5698ISMSV 51A PQ77813 5698ISMVS 510 IC37187 Two new features are included in tsm5.1.8 & tsm5.2.1. ### Sysroutes for APAR ### IC37187 5698ISMSV 52L IC37251 LIBRARY MANAGER CRASHES WHEN RESTARTED ### Sysroutes for APAR ### IC37251 5698ISMSV 52S IC37254 SPECTRA LOGIC GATOR LIBRARIES PERFORM SERIALIZED DISMOUNT AND ### Sysroutes for APAR ### IC37254 5698ISMSV 51S IC37293 Crash during Q Process when DB backup to a shared library is ### Sysroutes for APAR ### IC37293 5698ISMSV 52S PQ70579 ANR2705E SCHEDULER MANAGER DISABLED LOCK FAILURE ### Sysroutes for APAR ### PQ70579 5698ISMVS 510 PQ77689 5698ISMVS 520 IC37127 5698ISMSV 52A IC36062 5698ISMSV 51A PQ70977 LOADDB PREMATURE END OF DUMP WHEN USING DD FOR DSNAME ### Sysroutes for APAR ### PQ70977 5698ISMVS 510 IC37128 5698ISMSV 51A PQ77690 5698ISMVS 520 PQ71960 (518,52x)AUDIT DB ANR9999D ENTRY INSERTED FOR GROUPID ### Sysroutes for APAR ### PQ77749 5698ISMVS 520 IC36296 5698ISMSV 51A PQ71960 5698ISMVS 510 PQ72342 ABEND0C4 OUTGETNEXT QUERY STGPOOL ### Sysroutes for APAR ### PQ72342 5698ISMVS 510 IC37161 5698ISMSV 51A PQ72811 TRACE ENABLE LOCK TM ABEND0C4 SEGMENT VIOLATION ADDRESSING ### Sysroutes for APAR ### IC36118 5698ISMSV 51A PQ72811 5698ISMVS 510 PQ73337 (GA+) ANR9999D ASVOLACQ ERROR 262 GETTING VOLUME NAME ### Sysroutes for APAR ### PQ73337 5698ISMVS 510 IC36536 5698ISMSV 51A PQ73384 USING WEB ADMIN TO ADJUST BUFPOOLSIZE FAILS WITH MSGANR2020E ### Sysroutes for APAR ### IC37163 5698ISMSV 51A PQ73384 5698ISMVS 510 PQ77741 5698ISMVS 511 PQ73447 UNLOADDB APPARENT LOOP ### Sysroutes for APAR ### IC36399 5698ISMSV 51A PQ73447 5698ISMVS 510 PQ77701 5698ISMVS 520 PQ76186 Problems with MVS 5.2 devclass DEFINE, UPDATE and QUERY ### Sysroutes for APAR ### PQ76186 5698ISMVS 520 APARs fixed in level 5.2.0.0 IC30129 - Library Sharing Issues IC34621 - LABEL LIBVOL PROCESS COMPLETES WITH STATUS SUCCESS DESPITE IC35232 - TSM LIBRARY SHARING ANR8463E WRITE PROTECTED ANR9779E ANR1401W IC35560 - Issuing select * from DRMCSTGPOOL can cause srv hang. IC35713 - AUDITDB DISKSTORAGE TERMINATING IN ERROR NOT FIXING IC35809 - CACHE HIT PCT MAY INCORRECTLY REPORT GREATER THAN 100% IC35814 - LIBRARY MANAGER/CLIENT ENVIRONMENT CAN CAUSE DRIVES DEADLOCK IC35896 - TSM DOES NOT HONOR "UPDATE SCHEDULE" WITHIN A RUNNING SCHEDULE IC36080 - DATABASE RESTORE OF TSM 5.1.6 SERVER FAILS, AIX IF LANG IC36460 - SELECT FROM NODES TABLE MAY YIELD INCORRECT OUTPUT, IC36462 - copy storage pool missing data PQ65777 - Performance Degradation backing up system objects from windows PQ71960 - AUDIT DB ANR9999D ENTRY INSERTED FOR GROUPID ******************************************************************************** * WHERE TO FIND DOCUMENTATION * ******************************************************************************** The BOOK CD contains the IBM Tivoli Storage Manager Version 5 Release 2 manuals in HTML and PDF format. If you wish to use the PDF format, you can obtain the Adobe Acrobat Reader from the following site. http://www.adobe.com/prodindex/acrobat/readstep.html To install the Adobe Acrobat Reader on your platform, run the appropriate installation file, and follow the on-line installation instructions. Use the Adobe Acrobat Reader to view the index.pdf file. This file contains links to the 28 product pdf files. Click on the book title you want to view. To navigate back to the index.pdf file, press and hold the right mouse button, move the cursor to the "Go Back" selection, and release the mouse button. The books can also be obtained at the site http://publib.boulder.ibm.com/tividd/td/tdmktlist.html ******************************************************************************** * Getting Help * ******************************************************************************** - To receive technical support for Tivoli Storage Manager: + Contact your administrator. This should be your first step when having problems with Tivoli Storage Manager. + Your administrator will know how to contact IBM for Technical Support on your behalf. + For the latest information about Tivoli Storage Manager, visit the home page on World Wide Web. The URL is: http://www.ibm.com/software/sysmgmt/products/support /IBMTivoliStorageManager.html - To participate in user discussions of Tivoli Storage Manager: + Subscribe to an Internet listserv forum. This is not officially supported by IBM, but IBM support people do participate in the discussions, along with other users. You can subscribe by sending a note to listserv@vm.marist.edu that contains the following command in the message body: SUBSCRIBE ADSM-L yourfirstname yourlastname Posts can then be sent to: adsm-l@vm.marist.edu - Password protected server for z/OS & OS/390 TSM PTF and patch deliverables .................... IBM also supports a password protected server where you can find PTF maintenance, patches and other related materials. This server is service2.boulder.ibm.com Userid is tsm4mvs Password is xxxxxxx Where xxxxxxx is password obtained from IBM service. FTP syntax for most Web Browsers ftp://tsm4mvs:xxxxxxx@service2.boulder.ibm.com The following directory contains TSM for z/OS & OS/390 PTF's /storage/tivoli-storage-management/maintenance/server The following directory contains TSM for z/OS & OS/390 patches /storage/tivoli-storage-management/patches/server/MVS-OS390 - Anonymous FTP server .................... IBM also supports an anonymous FTP server where you can find PTF maintenance and other related materials. This server is service.boulder.ibm.com Three other anonymous servers are unofficially maintained by non-IBM volunteers. These servers are: ftp.rz.uni-karlsruhe.de (mirror - Germany) ftp.wu-wien.ac.at (mirror - Austria) ftp.cac.psu.edu (mirror - Pennsylvania) Trademarks __________ (*) Trademark of the IBM Corporation in the United States and other countries.