ITDT-XE – List Of Changes
Last update: 2017-05-03
ITDT-XE 9.3.0 build 20170504
(changes after build 20170427)
Maintenance&Diagnostic
- Fix: Performance Test, LTO-5 media adjusted data size to advertised capacity.
Log and Dump File Viewer / Blob2Report
- New: Added decoder for ERP Error Count Table.
- New: FSC Viewer, updated FSC Table.
Others
- Fix: Updated Online Help.
ITDT-XE 9.3.0 build 20170427
(changes after build 20170116)
Maintenance&Diagnostic
- Fix: Performance Test, LTO-6 drive where failing with LTO-5 media.
- Fix: Physical Copy, ITDT hang up when using different HBA's.
- Fix: Physical Copy, AIX physical copy memory allocation failed.
- Fix: Wrong output directory was created and used, instead of ITDT directory current working directory was used.
- Fix: Write Protect on Gen 5 cartridge in Gen 7 Drive on ITDT load/unload test.
- Fix: itdt-xe server was was not working when ITDT was called with a relative symlink path.
- Fix: Physical copy added detection of different HBA transfer sizes.
- Fix: Dump file name and blz file name include binary characters, added validation check.
- New: Added support for TS4300 Tape Library.
- New: Added support for 359255 archive device.
- New: Added support for LTO-8 device.
Log and Dump File Viewer / Blob2Report
- New: Eventlist, added grouping of same events like Log Sense Page 2E.
- New: FCH Dump, improved decoding of binary data.
- New: FCH Dump, changed time format for 3592.
- New: Added decoding for LTO-8 device.
- New: Added decoding for 359255F device.
- Fix: Tape Statistics does not show the data rate per wrap.
- Fix: ITDT does not display Log page 17, nor many other Log pages.
- Fix: Tape Statistics hang up caused by divide 0.
- Fix: Mode Sense page was not decoded correctly.
- Fix: Using default System Font instead of "Courier".
- Fix: Drive VPD - missing Library Information.
- Fix: Tapemap/Speedmap/ERPmap removed LPOS region 0.
- Fix: VPD SCSI Log, Time was not reported correctly.
- Fix: Typo VSARS Version should be HSARS Version.
FTP Service Functions
- Fix: 3592E07 dump retrieval and code update fails.
Tapeutil
- Fix: Read/Write command failed with white spaces in file name.
- Fix: Read -c fails on HBA supporting less than 1MB xfersize.
Others
- Fix: Product update was not detected correctly.
- New: New launch of 32 Bit version for Linux and Windows.
ITDT-XE 9.2.0 build 20170116
Maintenance&Diagnostic
New: Log Sense added support for pages greater than 128 bytes.
New: Check LTFS Readiness added support for Mac OSX Mountain Lion and Mavericks.
New: Read Cartridge Memory is available as Maintenance & Diagnostic function.
New: Scan improvement for AIX, only Tape and Changer devices will be processed.
New: Device List, added differentiation for TS3500 and TS4500.
Fix: Disable Microcode update for TS4500.
Fix: Library media Screening, adjust failure code if the selected drive has a loaded cartridge which could not be unloaded.
Fix: Opening device failed on MAC OS.
Fix: Init Drive file is not displaying the HBA information.
Log and Dump File Viewer / Blob2Report
New: Hyperlink for FSC to allow a direct switch to the FSC Viewer.
New: For VSARS and HSARS analysis added predefined query descriptions.
New: Mode Sense Page 0A Control Extension.
New: Updated database for FSV viewer.
New: Host Access Table from VPD will be decoded.
New: Nested dumps will always have the file extention ".dmp".
Fix: CM Mount History, field DRV ID was not decoded correctly.
Fix: Tapmap, wrap indication does not appear to be correct.
Fix: ERROR LOG BUFFER PAGE CODE have had PO(count) and it's a timestamp.
Fix: Data Analysis & Reporting, HSARS and VSARS where not using unique names.
Fix: Data Analysis & Reporting, Dump files without suffix could not be added.
Fix: Null Pointer exception while trying to open nested dump.
Fix: TS1X dumps - dump time were not correct; entirely TS11x dump time decoding reworked.
Tapeutil
Fix: Abort Button was not working.
Fix: ITDT got hang while listing the tape contents.
Fix: Write command failed with Exit code 5.
Others
New: JRE update to 8.0.3.20 also with Program Online Update. JRE will be bundled as a program feature.
New: Memory settings doubled to max. 786MB to avoid run OutOfMemory.
New: Added support for Windows Server 2016.
New: Removed 32 Bit installation packages.
Fix: Weird symbol is displayed after DD information.
Fix: Scan does not on terminate on AIX server.
Fix: AIX, generic devices could not be opened.
Fix: Windows, console launcher eclipsec.exe will be removed when JRE feature gets installed.
ITDT-XE 9.1.1 build 20160817
(changes after build 20160811)
Log and Dump File Viewer / Blob2Report
- Fix: FSC Lookup Tool, synchronized Fault Symptom Description with search field.
ITDT-XE 9.1.1 build 20160811
(changes after build 20160730)
Log and Dump File Viewer / Blob2Report
- New: Redesigned Fault Symptom Code Lookup Tool, removed tree viewer and added device type selection.
ITDT-XE 9.1.0 build 20160730
(changes after build 20160518)
Maintenance&Diagnostic
- New: Partial device scan, device discovering is based on a particular HBA or target Id range.
- New: Device list TS4500 could be identified as 3584 Version 2
Log and Dump File Viewer / Blob2Report
- New: Fault Symptom Code Lookup Tool.
- New: Show indication of Aborted SCSI commands.
- New: Added new eventlist entries for Dynamic Runtime Attributes.
- Fix: When search field was not empty and toggling was pressed, a null pointer exception happened.
- Fix: TapeDirectory was not shown for added support for LTO7.
Tapeutil
- New: Bug Fix, The Sand clock Status from Tapeutil never stops.
Others
- New: Added initial support for Windows Server 2016.
- Fix: Bug fix, disposal of used java resources.
- Fix: ITDT version displayed in "About ITDT" does not match with installer.
ITDT-XE 9.1.0 build 20160518
(changes after build 20160428)
Maintenance&Diagnostic
- New: TS3500/TS4500 differentiation added - "HARDWARE VERSION" string set to "2" for TS4500.
- Fix: Full Write Test - default blocksize gets selected by default.
- Fix: Read Excerciser - Test did not read entire tape if content was written w/o ITDT write tests.
- Fix: Full Write Test: Bugfix for Field Problem reported by Dell.
- Fix: LTFS Readiness Test: Added primary density code for LTO 7.
Tapeutil
- New: Servo Channel Calibration added to the tapeutil list for drive commands .
Log and Dump File Viewer / Blob2Report
- Fix: Mode Sense #0x10: Changed data type to vi_mbe and length from 2 to 3 for OBJECT BUFFER SIZE AT EARLY WARNING.
Others
- Fix: Improved robustness of SETTING.xml handling which keeps program setting values.
ITDT-XE 9.1.0 build 20160428
(changes after build 20160404)
General
- New Eclipse RCP framework 4.5.2.
- New IBM Java Runtime 8.0.2.10 bundled.
- New InstallAnywhere 2015 SP1 facility.
- AddOn: ITDT-L framework extended for Linux and Windows (See ITDT-L documentation).
- ITDT-XE server files: license changed to UTF-8.
Log and Dump File Viewer / Blob2Report
- New: Dynamically Parsing of all Log Sense pages.
- New: Set default value for automatically open of nested dumps to false.
- New: Highlighting of Log Sense values.
- Fix: LS page 0x3B(59) changed to LTO behavior --> "Host Port 1 Interface Errors".
- Fix: LTO7 HW Config - Dip Switches redefined on PAE input.
Data Analysis
- New: File extension filter button introduced.
ITDT-XE 9.1.0 build 20160414
(changes after build 20160404)
Log and Dump File Viewer / Blob2Report
- New: Dynamically Parsing of all Log Sense pages.
- New: Set default value for automatically open of nested dumps to false.
- New: Highlighting of Log Sense vlaues.
ITDT-XE 9.0.2 build 20160404
(changes after build 20160330)
Log and Dump File Viewer / Blob2Report
- Fix: Hex values for mode page 0E subpage 02 (ADC Primary Port) and subpage 03 (LU Descriptor) were cut off.
ITDT Library
- New: ITDT-L for X86_64 Linux and Windows and X86 on Linux (OEM only)
ITDT-XE 9.0.2 build 20160330
(changes after build 20160224)
Log and Dump File Viewer / Blob2Report
- Fix: Removed memory leak problem. ITDT is now capable to open 25 dump files in parallel.
- Fix: ITDT does not extract dump in some cases.
- Fix: ITDT does not show LOG EVENTF.
- New: Added detach and open of nested dumps.
Others
- Fix: Physical copy fails with blocksize > 512 KB.
- Fix: Windows installer: added parameter -clean during initial start.
- Fix: Moved application icons to app folder to ensure correct display.
- Fix: Read Test Step for SCSI Generic device: transfer size equals to value of blocksize now.
- New: Added hint in Read Test Step panel describing how the transfer size is calculated.
- New: Added support for z level based microcode.
ITDT-XE 9.0.2 build 20160224
(changes after build 20151030)
Log and Dump File Viewer / Blob2Report
- Fix: Fix for PGA1 open-thread (pre-release) LTO builds.
- Fix: Fix for field problem: Dump View crashed (Null Pointer Exception).
- Fix: Support for Log Sense Pages for 3573 and 3584.
- Fix: Fix for field problem: Incorrect timestamps on VPD SCSI Log being reported on JAG4.
- Fix: Fix for Field problem: CM Tape directory has 8 separate tables.
- New: Missing Alert for Shuttle Call System added.
- Fix: Incorrect error messages in citi.log file.
- Fix: Blob2Report - Fixed a bug with handling of file extension for txt-files when xml output was selected.
Others
- New: Functional Change Request 3319 – Add Drive Physical Location to Read Element Status Descriptor.
-
New:
Remote Application Platform (RAP)- Preliminary Work Items:
- Dynamic Class Loading for DumpView parts.
- Separation of visual components like StyledText.
- Maven build aligned to RAP components.
ITDT-XE 9.0.1 build 20151030
(changes after build 20151022)
Log and Dump File Viewer / Blob2Report
-
Fix:
Added description for Fault Sympton Codes 0x1055 and 0x7381.
-
Fix:
VPD Engineering log shows only one entry.
ITDT-XE 9.0.1 build 20151022
(changes after build 20151008)
Log and Dump File Viewer / Blob2Report
-
Fix:
Decoding of dump was freezing; issue with ring buffer of 'SCSI CDB Additional Information LUN0'.
-
Fix:
Blob2Report: '|' got replaced with '§'.
-
New:
Blob2Report: For XML reports, the version of the report engine was added as attribute "VERSION" in the REPORT Tag.
ITDT-XE 9.0.0 build 20151008
(changes after build 20151001)
ITDT Library
-
New:
API updated for new build (T10 encryption has been added, etc.)
-
Fix:
Removed error message CLI_DEFAULT not found from log file
-
Fix:
Fix for dump file a+b -always th name of the blz were used
ITDT-XE 9.0.0 build 20151001
(changes after build 20150923)
Diagnostics
-
Fix:
T10 Encryption Test was not working on LTO-4
ITDT Library
-
New:
Added new Interface function itdtGetLibraryVersionString()
-
New:
Added new Interface SEQ_T10_ENCYPTION_TEST
-
Fix:
Removed error message CLI_DEFAULT not found from log file
ITDT-XE Servers
-
Fix:
Installation Directory was not shown correctly
-
Fix:
Installer, formatted install information
Log and Dump File Viewer / Blob2Report
-
Fix:
Cartridge Memory was missing for LTO-7
-
Fix:
SCSI Command code A4 has been added as valid SCSI command
ITDT-XE 9.0.0 build 20150923
(changes after build 20150916)
Log and Dump File Viewer / Blob2Report
-
New:
Log Sense Page 0xC added description of parameter values 4,5,6,7ad 8.
-
Fix:
HW Config, Interface Type was wrong
ITDT-XE 9.0.0 build 20150916
(changes after build 20150910)
Log and Dump File Viewer / Blob2Report
-
Fix:
Log Sense Pages 0x02, 0x03 and 0x06 migrated to dynamically parsed (PARAM_CODE and PARAM_VALUE)
ITDT-XE 9.0.0 build 20150910
(changes after build 20150901)
Log and Dump File Viewer
-
Fix:
Dedicated LTO-7 Dump causes hang. Wrap-around buffer issue.
-
Fix:
improved robustness for microcode levels starting with "z"
AddOn: Blob2Report / Data Analysis
-
Fix:
">" got decoded wrong.
-
New:
DEBUG flag introduced for issue tracking.
ITDT-XE 9.0.0 build 20150901
(changes after build 20150818)
Log and Dump File Viewer
-
Fix:
Hangup during Dump file decoding
ITDT-XE 9.0.0 build 20150818
(changes after build 20150814)
Log and Dump File Viewer
-
Fix:
Log Sense Page 14h, was not displayed correctly
ITDT-XE 9.0.0 build 20150814
(changes after build 20150812)
Log and Dump File Viewer
-
Fix:
Dump Header, Link Level uses 8 digit format instead of 4 digit SCSI short format
-
Fix:
STA Common Temperature value where not correct decoded
ITDT-XE 9.0.0 build 20150812
(changes after build 20150806)
Log and Dump File Viewer
-
Fix:
Log Sense Page 3D, add support for 8 Byte counter values.
Others
-
Fix:
Force Reset of Persisted Data after Program update.
ITDT-XE 9.0.0 build 20150806
(changes after build 20150702)
Log and Dump File Viewer
-
Fix:
LTO-7 dump files with F7Y0 and F7Y1 decoder issues - Microcode level and EC level were changed.
-
Fix:
Maps adjusted for better screen usage.
-
Fix:
Log Sense Page #0x18 - Port information are wrong.
-
New:
Store Application Persisted State. Changes in GUI layout will be kept for next Program start.
-
New:
FSC's added 112C ... 112E
-
New:
Help Pages reworked.
Diagnostics
-
New:
New installer (self extraction) of ITDT-XE server files.
The files get extracted to the folder ITDT-XE.
New disclaimer and readme file.
-
Fix:
Inquiry transfer length changed from one byte to 2 bytes - regarding FCR3311
ITDT-XE 9.0.0 build 20150611
(changes after build 20150603)
Log and Dump File Viewer
-
New:
Added VPD field 'can_sn'
-
Fix:
Java ArrayIndexOutOfBoundsException
Diagnostics
-
Fix:
XE-Server for AIX: scan does not close all file handles.
ITDT-XE 9.0.0 build 20150603
(changes after build 20150511)
Log and Dump File Viewer
-
Added missing FSCs for 1189 and 118A
-
Fix:
Dump will not parse in ITDT V9.0 beta, incorrect value reported by microcode.
-
Fix:
Dump will not parse in ITDT V9.0 beta, missing leading "0" characters.
Others
-
Added Microsoft Windows 10 GUID
ITDT-XE 9.0.0 build 20150511
(changes after build 20150416)
Diagnostics
-
Fix:
Full Write: Total written kBytes were wrong in BLZ file – data overrun
-
Fix:
Licenses of ITDT-XE server files had wrong version number
Log and Dump File Viewer
-
New:
LogSense Page #17: Added description for value 0x204
-
New:
LogSense Page #17: Attributes 0x200 – 0x204 added information for each partition
-
Fix:
LTO-7 INIT Time was wrong
-
Fix:
LTO-7 DumpTime was not set
-
Fix:
DST (Daylight Saving Time) will now be considered in time calculation
-
Fix:
LibMessages: session ID was incorrect, wrong offset
Others
-
Fix:
Program Online Update: Fix for Windows product update – launcher (itdt-xe.exe) got replaced with
none automatic administrator rights
ITDT-XE 9.0.0 build 20150416
(changes after build 20150205)
Diagnostics
-
New:
LTO-7 diagnostic support
-
New:
Support of new OEM model names
-
New:
XE-Server: New naming scheme introduced
-
XE-Server Windows: automatically changed to administrator rights
-
Keep cartridge loaded in case a Test Step failed before
-
Fix:
"ITDT result code does not match with Tapeutil"
Log and Dump File Viewer
-
New:
LTO-7 dump support
-
New:
VPD Update History added for LTO-5/6/7 and 3592
-
New:
New time values and origin field added to dump header
-
New:
Dump Decoding: new Media Usage information
-
New:
Mode Sense Pages added
-
LP#17 SP:FF - needs a different descriptor as the other subpages
-
Fix:
Diminished tape capacity (0x31h) added - regarding FCR3299
-
Fix:
Log Sense Page #0x18: second port was missing
-
Fix:
CM Application Data is using 5 different IDs within CM Data section
-
Fix:
STA Common - was not shown in OEM version
-
Fix:
SK/ASC/ASCQ 4/FC/00 in ITDT tool but not dmpview for JAG drive
Others
-
New:
Program Online Update for ITDT-XE OEM
-
New:
New Java Runtime (IBM JRE 7.1-v7r1SR2FP10)
-
New:
New jar signing for each ITDT flavor
-
New:
New Installer: Install Anywhere 2014SP1
-
Migration to Eclipse RCP 4.4.2
-
About Dialog: sort the table content by clicking the column header
-
Runtime verification of product plug-ins
-
ITDT feature name aligned to product
ITDT-XE 8.1.0 build 20150206
(changes after build 20150205)
-
Fix:
SK/ASC/ASCQ 4/FC/00 in ITDT tool but not dmpview for JAG drive
ITDT-XE 8.1.0 build 20150205
(changes after build 20141216)
Diagnostics
-
Fix:
AIX program abort on VIO's environment
Log and Dump File Viewer
-
Added Mode Sense Header and Mode Sense Page 0x10
-
Fix:
Log Sense Page 11 was truncated
-
Added new Event "Log Eventf"
-
Changed algorithm of dump time calculation for LTO-6 dump time
-
Changed decoding of Lib Messages from hard-coded to descriptor based
-
Support for LTO realtime clock on "SCSI ..." events
-
Added new VPD fields: oem_sku and hac_sp, hac_xxx
-
Added "STA Common"
-
Added "VPD Media Usage Log"
-
Added "Log In Host Table"
-
New tags decoded for: SCSI Status Nexus, SCSI CDB Nexus, SCSI Sense Data, and SCSI Tansfer Data
-
New tags decoded for: SCSI CBD Additional and SCSI Status Additional Information
-
Log Sense 3E - added codes for OEM version: 0x106, 0x122, 0x144, 0x145
Analysis and Reporting / Blob2Report
-
For multiple events the index was in reverse order; e.g. LP#17
-
Fix:
Fix, when the "Condition" has leading/ending spaces
ITDT-XE 8.1.0 build 20141216
(changes after build 20141205)
-
Blob2Report added return values
-
Fix:
for opening Blob files
-
CM EOD Information for all partitions
-
LS#3E fields added for OEM (0x138/139 and 0x148/149)
-
Improvement for Dump Header Field "Firmware Level"
-
Data Analysis and Reporting: When adding a huge amount of files the ITDT Screen
gets dark" ==> the problem is caused by a complete File and Directory scan within
the UIThread. Splitting this function into a separate thread solved this issue.
-
Fix:
Unable to open 3592 E08 Dump
ITDT-XE 8.1.0 build 20141205
(changes after build 20141114)
-
Fix:
Windows scan problem, not all devices are detected
-
Dump Decoder: LTO2 raw dumps where not decoded correctly
-
Dump Decoder: VPD entry was missing on several dumps
-
Dump Decoder: Added support for 3580 engineering microcode levels (starting with "z")
-
Dump Decoder: Improved decoding of Dump Header, added missing fields
-
Dump Decoder: Added Dump Init Time to Dump Header for all models
ITDT-XE 8.1.0 build 20141114
(changes after build 20141031)
-
Readme file updated – aligned to Installer changes and new bundling of: Server files, ITDT-L and Blob2Report
-
Data Analysis and Reporting: entire Event selection (*.*) bug fixed: newName was not used; index was wrong
-
Dump and Log File FViewer: Event-, Report and SCSI Trace Tab
-
Adding context menu for Zoom In/Out, Copy
-
Search: horizontal scrolling improved
-
SCSI Trace: Lun2 had wrong reference to Lun0
-
Program Online Update: Naming changed: Do you want to restart ITDT now?
-
Test Engine:
-
Full Write: Block size selection will be re-shown as long as the customer selects a valid BS.
-
Added debug information, when a device could not be opened on Windows
-
Graphical Framework: Clean up for "citi.log" file to prevent misleading errors
ITDT-XE 8.1.0. build 20141031
(Integration Build with separate Installer)
Diagnostics
-
Product Support for TS1150.
-
ITDT-XE Server files are bundled with RCP and can be directly accessed via menu: "Server->ITDT-XE Server ..."
-
AddOn features files are bundled with RCP and can be directly accessed via menu: "Help->Add On ..."
-
Naming of citi-socket.jar aligned to new naming scheme: com.ibm.ts.citi.socket.jar; version introduced.
-
Fix:
core dump on AIX during scan
Log and Dump File Viewer
-
Product Support for TS1150 (Speed Map, Tape Map, MHR Head, Event List, Report, etc.)
-
SCSI Trace redesigned: grouped items (LTO only).
-
SCSI Trace ascending, descending sorting selection.
-
SCSI Trace added new search function, export to file and selection buttons, new search high-lighting.
-
Event tab: new search facility. Search will include all elements - new search high-lighting.
-
Report tab: redesigned UI and new search high-lighting, line numbering.
-
Added decoding of SCSI Transfer Data (Lun0, Lun1, Lun2, Transient).
-
Added decoding of SCSI CDB Additional Information (Lun0, Lun1, Lun2, Transient).
-
Added decoding of SCSI Status Additional Information (Lun0, Lun1, Lun2, Transient).
-
Added decoding of FCH dump.
-
Aligned FID Formatted Error Log 3592
-
Added Persistent Reserve Information
-
Common Naming Scheme for all SCSI events.
-
Hex Dump Alignment changed.
-
Changed data type of Lib Input Serial Number, back to string.
-
Fix:
SCSI Lun1, Lun2 were not decoded.
-
Fix:
LIB Messages not displayed in SCSI Trace
Others
-
Installer simplified: features Additional Server and AddOn have been removed and will be installed/updated automatically.
ITDT-XE8.0.0 build 20141002
(Program Online update)
-
Log and Dump File Viewer: issues to open Jaguar dumps and LTO6 dumps
-
E08 Performance Test: Cartridge size can not be detected correctly on some platforms (4TB and 10TB)
-
New:
Blob2Report will be distributed in the AddOn program sub-folder
ITDT-XE 8.0.0. build 20140926
(Program Online update)
- New:
Automatically detaching of Addons and additionalServer after Program Update
-
New:
Dialog "Show Change Log"
-
Fix:
itdt hangs during ProtecTier scan
-
New:
Log and Dump File Viewer: added can_sn to DUMP_HEADER
-
Storage Tools Request: Dump Viewer only shows Lifetime secs for LTO5/LTO4 dumps
ITDT-XE 8.0.0. build 20140919
(Program Online update)
-
Log and Dump File Viewer: Report Panel export to File function: changed default name of report file from "Report.txt" to "<drive_serialnumber>.txt"
-
Log and Dump File Viewer: Some Lib Messages are not displayed correctly
-
Log and Dump File Viewer: DUMP TIME SEC on LTO DUMP Header screen were not correct
-
Fix:
3592E08 Performance test, set wrap and head count for 10TB media
-
Fix:
3592E08 Erase command adjusted time value from 3h to 6.5h
-
extended reporting capabilities for XML
-
Fix:
FTP firmware update on 3592E06 drives does not work
ITDT-XE 8.0.0. build 20140626
(Main Build with separate Installer)
Diagnostics
-
Improve Test Confidence Level: Cartridge Verification
-
Added Product support for TS1050 / TS1060
-
Collection of Environment Information, HBA Driver Version, HBA Info, HBA firmware, HBA details
-
Checkltfsreadiness add check for critical blocksizes
-
Read Thermal Sensor remove for LTO4 and earlier
-
Tapeutil: Set the special device file: for IBM devices the regular driver name will be used; for generic devices the H-B-T-L is used
-
Output for "scan" adjusted on AIX
-
Pre-support TS1150
Log and Dump File Viewer
-
Improved handling of corrupted dumps - ITDT Dump Parsing Info, Icon in Tab
-
Improvements for Head Resistance data decoding, split average line
-
Option to disable dump attaching to BLZ file, via Preferences
-
TS1140 remove VPD Engineering Log
-
Hide Tape Map Raw Data
-
Rename LTO Dump Header in Event list
-
Display the Power On Count in the Dump Header
-
VPD SCSI Log - bytes 14 and 16-17 displayed in hex
-
Log Pages that are supported by the drive
-
3592 remove empty SCSI Sections
Installer & Environment
-
Added operating system support for Windows Server 2012 R2 and Windows 8.1
-
Added operating system support for RHEL 7
-
Changed ITDT naming convention: version format, include build date
Problems fixed
-
ITDT 7.1 will not test LTO-2 drives
-
Can't read LTO3 dump with 7.1.0
-
Dump hang during decode
-
Button not shown in Windows with enlarged fonts
-
Verify (image file with tape) failed for larger files. After the meta information was read, a seek to begin of file has to be issued
-
Standard Test failed with "Replace Medium" message
-
LTO2 and LTO1 Get Logs failed because LogSense Page 0x3E is not supported
-
PhysicalCopy failed on Win32 file==>tape
-
ITDT Blob Header: IBM Tape Device Driver Version was not shown
-
TS1140 and later set the partition to WRAP_WISE if it fails with default values
-
Performance Test, when a timeout occurred and it's not in the re-test phase, the test will not be aborted
-
Wrong declaration of JK cartridges fixed
-
Performance Test: 3592 cartridges which are partitioned
-
Devices missing during scan, device could not be opened
-
Verify (Image file with Tape) failed for larger files.
-
Physical Copy failed on Win32 file==>tape