Fix (APAR): PM39910 Status: Fix Release: 7.0.0.17 Operating System: AIX,HP-UX,IBM i,Linux,Solaris,Windows,z/OS Supersedes Fixes: CMVC Defect: 706328 Byte size of APAR: 19034 Date: 2011-09-14 Abstract: After updating the tracespec on the "runtime" tab of Troubleshooting ->Logs and Trace -> (server) -> Change Log Detail Levels, the new tracespec is not appearing after going back t Description/symptom of problem: PM39910 resolves the following problem: ERROR DESCRIPTION: When setting the runtime trace on a nodeagent, that tracespec appears on the runtime tab of all processes. Also, when enabling the runtime trace with wsadmin, the administrative console does not reflect the new trace specified while the SystemOut.log indicates that the new trace spec was set. LOCAL FIX: PROBLEM SUMMARY USERS AFFECTED: All users of IBM WebSphere Application Server V7.0 using the administrative console PROBLEM DESCRIPTION: After updating the tracespec on the "runtime" tab of Troubleshooting ->Logs and Trace -> (server) -> Change Log Detail Levels, the new tracespec is not appearing after going back to this panel. RECOMMENDATION: The tracespec has been taken into effect in the runtime, but is not displayed accurately in the administrative console. You may verify the current runtime tracespec by either one of the following options: 1. check the SystemOut.log for the latest entry indicating the new tracespec: ManagerAdmin I TRAS0018I: The trace state has changed. The new trace state is 2. Invoke wsadmin to get the current runtime tracespec. Here is a sample wsadmin invocation using jython, where , , and are to be replaced with the appropriate values for your environment: objName = AdminControl.queryNames('WebSphere:cell=,node=,process= ,type=TraceService,*') AdminControl.invoke(objName, "getTraceSpecification") The runtime trace specification in the administrative console was not being pulled from the trace service MBean. PROBLEM CONCLUSION: APAR PM39910 has corrected the "runtime" tab to correctly reflect the runtime tracespec after it has been modified by the user. The fix for this APAR is currently targeted for inclusion in fix pack 7.0.0.19. Please refer to the Recommended Updates page for delivery information: http://www.ibm.com/support/docview.wss?rs=180&uid=swg27004980 Directions to apply fix: Fix applies to Editions: Release 7.0 _X_ Application Server (Express or BASE) _X_ Network Deployment (ND) ___ Edge Components ___ Developer Install Fix to all WebSphere installations unless special instructions are included below. Special Instructions: None NOTE: The user must: * Logged in with the same authority level when unpacking a fix, fix pack or refresh pack. * Be at V7.0.0.0 or newer of the Update Installer. Certain iFixes may require a newer version of the Update Installer and the Update Installer will inform you during the installation process if a newer version is required. This can be checked by reviewing the level of the Update Installer in file /updateinstaller/version.txt. The Update Installer can be downloaded from the following link: http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991 1) If your iFix is delivered as a single file with a .pak extension, Copy the .pak file directly to the maintenance directory. If your iFix is delivered as a single file with a .zip extension, unzip the file into the maintenance directory. 2) Shutdown WebSphere Application Server. Manually execute setupCmdLine.bat in Windows or . ./setupCmdLine.sh in Unix from the WebSphere instance that maintenance is being applied to. 3) For IBM i users, use the update command to install and uninstall the interim fix. The IBM Information Center can provide additional details, if needed, on the use of this command. http://www14.software.ibm.com/webapp/wsbroker/redirect?version=compass&product=was-nd-iseries&topic=rins_update. For non-IBM i users, launch the Update Installer and click the Next button on the Welcome page. 4) Enter the directory path of the installation location of the WebSphere product you want to update, and click the Next button. 5) Select the "Install maintenance package" operation and click the Next button. 6) Enter the directory path of your maintenance directory where you have the maintenance packages (.pak files) and click the Next button. 7) The Available Maintenance Package to Install page should list all maintenance packages (.pak files) that it finds in the directory path provided in the previous step. The Update Installer will select the correct maintenance packages based on your system configuration and will not allow an invalid combination to be installed. Please keep the Update Installer recommendations and click the Next button and continue with the installation of the maintenance package. To determine why some maintenance packages have been identified as not applicable, see description in log found in /logs/tmp*/updatelogs.txt 8) For all platforms except Windows. In pre-install summary panel, use the "verify permission" feature to verify the user has permissions to apply updates to files associated with the selected maintenance. Correct any file permissions before clicking next to start the install. 9) Restart WebSphere Application Server. Directions to remove fix: NOTE: * The user must have Administrative rights in Windows, or be the Actual Root User in a UNIX environments. * FIXES MUST BE REMOVED IN THE ORDER THEY WERE APPLIED * DO NOT REMOVE A FIX UNLESS ALL FIXES APPLIED AFTER IT HAVE FIRST BEEN REMOVED * YOU MAY REAPPLY ANY REMOVED FIX Example: If your system has fix1, fix2, and fix3 applied in that order and fix2 is to be removed, fix3 must be removed first, fix2 removed, and fix3 re-applied. 1) Shutdown WebSphere Application Server. Manually execute setupCmdLine.bat in Windows or . ./setupCmdLine.sh in Unix from the WebSphere instance that uninstall is being run against. 2) Start Update Installer 3) Enter the installation location of the WebSphere product you want to remove the fix. 4) Select "Uninstall maintenance package" operation. 5) Enter the file name of the maintenance package to uninstall (PKxxxxx.pak). 6) UnInstall maintenance package. 7) Restart WebSphere Directions to re-apply fix: 1) Shutdown WebSphere Application Server. 2) Follow the Fix instructions to apply the fix. 3) Restart WebSphere Application Server. Additional Information: