Fix (APAR): PM15824 Status: Fix Release: 6.0.2.41, 6.1.0.29, 6.1.0.31, 7.0.0.9, 7.0.0.11 Operating System: AIX,HP-UX,i5/OS,IBM i,Linux,Solaris,Windows Supersedes Fixes: CMVC Defect: PM15824 Byte size of APAR: V6 31809, V7 34307 Date: 2010-06-11 Abstract: A ClassCastException is seen using command caching during high volume caching. Description/symptom of problem: PM15824 resolves the following problem: ERROR DESCRIPTION:? Exceptions occur under stress when command caching is enabled java.lang.ClassCastException: com.ibm.commerce.order.objsrc.OfferCache at com.ibm.commerce.accesscontrol.policymanager.CommandLevelAuthori zationCacheCmdImpl.setOutputProperties(CommandLevelAuthorization CacheCmdImpl.jav a(Compiled Code)) at com.ibm.websphere.command.CacheableCommandImpl.execute(Cacheable CommandImpl.java(Compiled Code)) at com.ibm.commerce.accesscontrol.policymanager.PolicyManagerImpl.i sAllowed(PolicyManagerImpl.java(Compiled Code)) at com.ibm.commerce.accesscontrol.AccManager.isAllowed(AccManager.j ava(Compiled Code)) at com.ibm.commerce.accesscontrol.AccManager.isActionAllowed(AccMan ager.java(Compiled Code)) LOCAL FIX:? n/a PROBLEM SUMMARY:? USERS AFFECTED: All users of IBM WebSphere Application Server using dynacache. PROBLEM DESCRIPTION: A ClassCastException is seen using command caching during high volume caching. RECOMMENDATION: None During high volume caching a race condition can occur resulting in the dynacache service returning the incorrect object for the specified cache id. PROBLEM CONCLUSION:? Synchronization has been added to ensure dynacache returns the correct cached object. The fix for this APAR is currently targeted for inclusion in fix packs 6.0.2.43, 6.1.0.33 and 7.0.0.13. Please refer to the Recommended Updates page for delivery information: http://www.ibm.com/support/docview.wss?rs=180&uid=swg27004980 Directions to apply fix to V6 and V7: Fix applies to Editions: x_ Application Server (Express or BASE) x_ Network Deployment (ND) __ WebSphere Business Integration Server Foundation (WBISF) __ Edge Components __ Developer __ Extended Deployment (XD) Install Fix to: Method: x_ Application Server Nodes __ Deployment Manager Nodes __ Both NOTE: The user must: * For V6, have Administrative rights in Windows, or be the Actual Root User in a UNIX environments. * For V7, logged in with the same authority level when unpacking a fix, fix pack or refresh pack. * For V6, be at V6.1.0.13 or newer of the Update Installer and for V7, be at V7.0.0.0 or newer of the Update Installer. Certain iFixes may require a newer version of the Update Installer and the Update Installer will inform you during the installation process if a newer version is required. This can be checked by reviewing the level of the Update Installer in file /updateinstaller/version.txt. The Update Installer can be downloaded from the following link: http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991 For detailed instructions to Extract the Update Installer see the following Technote: http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205400 Note that there are two different methods for delivering iFixes, depending on the contents. The fix may be delivered either as a single file with a .pak extension (such as 6.1.0.11-WS-WAS-IFPK12345.pak) or a single file with a .zip extension (such as 6.1.0.11-WS-WAS-IFPK12345.zip) which then contains one or more files with a .pak extension. 1) If your iFix is delivered as a single file with a .pak extension, Copy the .pak file directly to the maintenance directory. If your iFix is delivered as a single file with a .zip extension, unzip the file into the maintenance directory. 2) Shutdown WebSphere Manually execute setupCmdLine.bat in Windows or . ./setupCmdLine.sh in Unix from the WebSphere instance that maintenance is being applied to. 3) For V7 IBM i users, use the update command to install and uninstall the interim fix. The IBM Information Center can provide additional details, if needed, on the use of this command. http://www14.software.ibm.com/webapp/wsbroker/redirect?version=compass&product=was-nd-iseries&topic=rins_update. For V7 non-IBM i users and V6 users, launch the Update Installer and click the Next button on the Welcome page. 4) Enter the directory path of the installation location of the WebSphere product you want to update, and click the Next button. 5) Select the "Install maintenance package" operation and click the Next button. 6) Enter the directory path of your maintenance directory where you have the maintenance packages (.pak files) and click the Next button. 7) The Available Maintenance Package to Install page should list all maintenance packages (.pak files) that it finds in the directory path provided in the previous step. The Update Installer will select the correct maintenance packages based on your system configuration and will not allow an invalid combination to be installed. Please keep the Update Installer recommendations and click the Next button and continue with the installation of the maintenance package. 8) Please note that in the future, if a Feature Pack is installed or uninstalled, a different set of iFixes will be needed. Use the Update Installer again at that time, with the maintenance directory location where these maintenance packages are stored, to determine the required interim fixes for the new WebSphere and Feature Pack(s) combination. 9) The maintenance packages could have one of a set of names, and these names will help determine which maintenance package you need to install. The APAR name (PKxxxxx) should appear as part of the filename. Between the APAR number and the .pak extension there will be 0 to 2 characters added. The table below indicates the usage of each of the maintenance packages with respect to which Feature Packs, if any, are installed. |.pak File Names |No Feature Packs|EJB3 Only|WebServices Only| Both | |6.1.0.x-WS-WAS-IFPK12345 | X | X | X | X | |6.1.0.x-WS-WAS-IFPK12345C | X | | | | |6.1.0.x-WS-WAS-IFPK12345CE | | X | X | X | |6.1.0.x-WS-WAS-IFPK12345W | X | X | | | |6.1.0.x-WS-WAS-IFPK12345WE | | | X | X | |6.1.0.x-WS-WAS-IFPK12345E | X | | X | | |6.1.0.x-WS-WAS-IFPK12345EE | | X | | X | 10) For V7, all platforms except Windows. In pre-install summary panel, use the "verify permission" feature to verify the user has permissions to apply updates to files associated with the selected maintenance. Correct any file permissions before clicking next to start the install. 11) Restart WebSphere Directions to remove fix: NOTE: * The user must have Administrative rights in Windows, or be the Actual Root User in a UNIX environments. * FIXES MUST BE REMOVED IN THE ORDER THEY WERE APPLIED * DO NOT REMOVE A FIX UNLESS ALL FIXES APPLIED AFTER IT HAVE FIRST BEEN REMOVED * YOU MAY REAPPLY ANY REMOVED FIX Example: If your system has fix1, fix2, and fix3 applied in that order and fix2 is to be removed, fix3 must be removed first, fix2 removed, and fix3 re-applied. 1) Shutdown WebSphere Manually execute setupCmdLine.bat in Windows or . ./setupCmdLine.sh in Unix from the WebSphere instance that uninstall is being run against. 2) Start Update Installer 3) Enter the installation location of the WebSphere product you want to remove the fix. 4) Select "Uninstall maintenance package" operation. 5) Select file name of the maintenance package to uninstall (for example, 6.1.0.11-WS-WAS-IFPK12345.pak). 6) Verify the Uninstallation Summary and continue with the uninstall. 7) Restart WebSphere Directions to re-apply fix: 1) Shutdown WebSphere. 2) Follow the Fix instructions to apply the fix. 3) Restart WebSphere. Additional Information: