Fix (APAR):  JR25465

Status:  Fix

Release:  6.0.2

Operating System:  AIX,HP-UX,Linux,Solaris,Windows

Supersedes Fixes:  

CMVC Defect:  xxxxxx

Byte size of APAR:  8161

Date: 2006-12-14

Abstract:  The original data source of the standalone node still exists in the node scope after federation to deployment manager. When the cell level data source is changed, the original stan

Description/symptom of problem:  
JR25465 resolves the following problem:

ERROR DESCRIPTION:                                              
Deleting the datasource at node scope while federating a node to
a cell                                                          

LOCAL FIX:                                                      
NA                                                              

PROBLEM SUMMARY

USERS AFFECTED:
WebSphere Process Server 6.0.1.x users.

PROBLEM DESCRIPTION:
The original data source of the
standalone node still exists in the
node scope after federation to
deployment manager. When the cell
level data source is changed, the
original standalone node will still
refer to the data source in the node
scope, thus causing the inconsistent
problem.

RECOMMENDATION:
None

The original data source of the standalone node still exists
in the node scope after federation to deployment manager. When
the cell level data source is changed, the original standalone
node will still refer to the data source in the node scope,
thus cause inconsistent problem.

PROBLEM CONCLUSION:                                             
This fix fixes the problem described above.                     


Directions to apply fix:  
Before applying the iFix ensure that WebSphere Process Server 6.0.1 is installed on the system.
Also download and follow Update Installer installation instructions.  The Update Installer can be downloaded from the following link:
http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991

1) Copy the pak file to the directory maintenance in the UpdateInstaller directory

2) Shutdown WebSphere Process Server. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

3) Run the UpdateInstaller and follow the prompts.

4) Restart WebSphere

Directions to remove fix:  
NOTE:  FIXES MUST BE REMOVED IN THE REVERSE ORDER IN WHICH THEY WERE APPLIED.  DO NOT REMOVE A FIX UNLESS  ALL FIXES APPLIED AFTER IT HAVE FIRST BEEN REMOVED.  YOU MAY REAPPLY ANY REMOVED FIX.

Example:  If your system has fix1, fix2, and fix3 applied in that order and fix2 is to be removed, fix3 must be removed first, then fix2 may be removed

1) Shutdown WebSphere. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

2) Follow the Fix instructions that are packaged with the Fix Installer on how to uninstall and reinstall the Fix.

3) Restart WebSphere

Directions to re-apply fix:  
1) Shutdown WebSphere. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

2) Run the UpdateInstaller and follow the instructions. The Update Installer can be downloaded from the following link:
http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991

3) Restart WebSphere Process Server

Additional Information: