Fix (APAR):  JR23721

Status:  Fix

Release:  6.0.1.5,6.0.1.4,6.0.1.3,6.0.1.2

Operating System:  AIX,HP-UX,Linux,Solaris,Windows

Supersedes Fixes:  

CMVC Defect:  xxxxxx

Byte size of APAR:  60528

Date: 2007-04-11

Abstract:  BO does not store all the data changes after the change summary begins logging during the process.

Description/symptom of problem:  
JR23721 resolves the following problem:

ERROR DESCRIPTION:                                              
The Change Summaries to do not work correctly because they are  
not properly finalized, resulting in the fact that when         
beginLogging() is called, all previous logging is lost.         

LOCAL FIX:                                                      
no local fix.                                                   

PROBLEM SUMMARY

USERS AFFECTED:
WebSphere Process Server 6.0.1.x users

PROBLEM DESCRIPTION:
BO does not store all the data changes
after the change summary begins
logging during the process.

RECOMMENDATION:
None

BO does not store all the data changes after the change
summary begins logging during the process and so SCA has to
implement to check for the change summary logging status and
re-resume the logging to keep track of the DO changes as well.

PROBLEM CONCLUSION:                                             
BO keeps track of data object once starts logging and need to   
resume logging while data changes before ending the logging     
and simultaneously SCA has to implement to check and resume     
logging of the data object in the change summary.               


Directions to apply fix:  
Before applying the iFix ensure that WebSphere Process Server 6.0.1 is installed on the system.
Also download and follow Update Installer installation instructions.  The Update Installer can be downloaded from the following link:
http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991

1) Copy the pak file to the directory maintenance in the UpdateInstaller directory

2) Shutdown WebSphere Process Server. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

3) Run the UpdateInstaller and follow the prompts.

4) Restart WebSphere

Directions to remove fix:  
NOTE:  FIXES MUST BE REMOVED IN THE REVERSE ORDER IN WHICH THEY WERE APPLIED.  DO NOT REMOVE A FIX UNLESS  ALL FIXES APPLIED AFTER IT HAVE FIRST BEEN REMOVED.  YOU MAY REAPPLY ANY REMOVED FIX.

Example:  If your system has fix1, fix2, and fix3 applied in that order and fix2 is to be removed, fix3 must be removed first, then fix2 may be removed

1) Shutdown WebSphere. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

2) Follow the Fix instructions that are packaged with the Fix Installer on how to uninstall and reinstall the Fix.

3) Restart WebSphere

Directions to re-apply fix:  
1) Shutdown WebSphere. It is important that you perform a controlled and complete shutdown of the server to ensure that all transactions have completed, before installing the fix.

2) Run the UpdateInstaller and follow the instructions. The Update Installer can be downloaded from the following link:
http://www.ibm.com/support/docview.wss?rs=180&uid=swg21205991

3) Restart WebSphere Process Server

Additional Information: