IBM WebSphere Studio Application Monitor V3.2
Readme
for the update installer V3.2.0.2
Contents
3.2 Unpacking the Update Installer
3.4 Updating the Response File
3.6 Cleaning Prepared Installation
3.8 Rolling Back Failed Installation
4.1 Unpacking the Update Installer
4.3 Updating the Response File
4.5 Cleaning Prepared Uninstallation
4.7 Rolling Back Failed Uninstallation
5 Displaying Installed Updates
5.1 Unpacking the Update Installer
5.3 Updating the Response File
5.4 Displaying Installed Updates
The Update
Installer for WebSphere Studio Application Monitor
V3.2 provides the following functionality:
This readme describes how to install and uninstall updates.
3.2.0.2
3.2.0.1
This section
describes how to install Fix Packs and interim fixes.
The Fix
Packs and interim fixes are distributed as tar files. Create a temporary directory, put the update package there and un-tar.
The Fix
Pack tar will typically contain two tars: one for Data Collectors and the other
for Managing Server. Un-tar them as described in the Fix Pack readme.
After un-taring the update package you should get the updates
directory that contains the file with the *.update extension. For example:
>tar xvf
3.2.2.0-TIV-WSAM_MP-IF0001.tar
Readme.3220.01.txt
updates/
updates/3.2.2.0-TIV-WSAM_MP-IF0001.update
Copy the
update installer tar to the same directory were you un-tared
the update package. This directory will typically contain the updates subdirectory. Un-tar the update
installer package using the tar command, for example:
>tar xvf WSAM_UpdateInstaller_3.2.0.2.tar
silentUpdate.bat
silentUpdate.properties
silentUpdate.sh
update.jar
The
resulting directory structure will contain both, the update installer and the
update file. For example:
silentUpdate.bat
silentUpdate.properties
silentUpdate.sh
update.jar
Readme.3220.01.txt
updates/
updates/3.2.2.0-TIV-WSAM_MP-IF0001.update
Before
running the update installer you should login as root (Administrator) or owner
of the product directory. Then update the environment as below.
The update
installer requires the Java Runtime Environment version 1.3.1 or higher. Either
include the java command into PATH or define the JAVA_HOME environment variable
to point to the Java Runtime Environment home directory.
For
example, on UNIX or Linux, run:
JAVA_HOME=/opt/WebSphere/AppServer/java
export
JAVA_HOME
The update
installer is non-interactive silent installer that works based on the response
file. The default name of the response file is silentUpdate.properties
and it is supplied with the update installer. Update the response file as
follows:
Note: the response file is Java Properties file. Any
backward-slashes should be doubled, for example:
product.location=C:\\Program Files\\IBM\\WSAM
To reduce
the application server or Managing Server down-time the update installer allows
to prepare installation while the product is running.
This steps is optional but is recommended.
In order to
prepare installation change to the directory where the update installer scripts
are stored and run the following command:
Windows:
silentUpdate.bat –prepareInstall
UNIX or Linux:
./silentUpdate.sh -prepareInstall
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -prepareInstall
my.properties
UNIX or Linux:
./silentUpdate.sh -prepareInstall my.properties
A typical
output of the -prepareInstall command is:
>./silentUpdate.sh
-prepareInstall
Update installer version 3.2.0.2
Logging details into /opt/ibm/wsam/logs/update/update_20050916213723.log
Action: prepare install
Finished successfully
To clean
results of ‘-prepareInstall’ command change to the
directory where the update installer scripts are stored and run the following
command:
Windows:
silentUpdate.bat –cleanPrepared
UNIX or Linux:
./silentUpdate.sh –cleanPrepared
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -cleanPrepared
my.properties
UNIX or Linux:
./silentUpdate.sh -cleanPrepared my.properties
A typical
output of the -cleanPrepared command is:
>./silentUpdate.sh
-cleanPrepared
Update installer version 3.2.0.2
Logging details into /opt/IBM/wsam/logs/update/update_20050916213723.log
Action: clean prepared
Finished successfully
It is
recommended that you run the -prepareInstall command
before installing the update, see the previous section for details.
Before
installing the update you should stop the product that you will update, i.e.
the application server being monitored or the Managing Server components.
After you
stopped the product change to the directory where the update installer scripts
are stored and run the following command.
Windows:
silentUpdate.bat –install
UNIX or Linux:
./silentUpdate.sh
-install
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -install my.properties
UNIX or Linux:
./silentUpdate.sh
-install my.properties
A typical
output of the -install command is:
>./silentUpdate.sh
-install
Update installer version 3.2.0.2
Logging details into /opt/ibm/wsam/logs/update/update_20050916213723.log
Action: install
Finished successfully
To rollback
failed installation change to the directory where the update installer scripts
are stored and run the following command:
Windows:
silentUpdate.bat –rollback
UNIX or Linux:
./silentUpdate.sh
–rollback
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -rollback my.properties
UNIX or Linux:
./silentUpdate.sh
-rollback my.properties
A typical
output of the -rollback command is:
>./silentUpdate.sh
-rollback
Update installer version 3.2.0.2
Logging details into /opt/IBM/wsam/logs/update/update_20050916213723.log
Action: rollback
Finished successfully
This
section describes how to uninstall Fix Packs and interim fixes.
The all
necessary uninstall information is stored to the product directory under the update sub-directory. You don’t need
the original update package in order to uninstall it. So download the latest
update installer and un-tar it:
>tar xvf
WSAM_UpdateInstaller_3.2.0.2.tar
silentUpdate.bat
silentUpdate.properties
silentUpdate.sh
update.jar
Before
running the update installer you should login as root (Administrator) or owner
of the product directory. Then update the environment as below.
The update
installer requires the Java Runtime Environment version 1.3.1 or higher. Either
include the java command into PATH or define the JAVA_HOME environment variable
to point to the Java Runtime Environment home directory.
For
example, on UNIX or Linux, run:
JAVA_HOME=/opt/WebSphere/AppServer/java
export
JAVA_HOME
The update
installer is non-interactive silent installer that works based on the response
file. The default name of the response file is silentUpdate.properties
and it is supplied with the update installer. Update the response file as
follows:
Note: the response file is Java Properties file. Any
backward-slashes should be doubled, for example:
product.location=C:\\Program Files\\IBM\\WSAM
To reduce
the application server or Managing Server down-time the update installer allows
to prepare uninstallation
while the product is running. This steps is optional but is recommended.
In order to
prepare uninstallation change to the directory where
the update installer scripts are stored and run the following command:
Windows:
silentUpdate.bat –prepareUninstall
UNIX or Linux:
./silentUpdate.sh -prepareUninstall
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -prepareUninstall
my.properties
UNIX or Linux:
./silentUpdate.sh -prepareUninstall my.properties
A typical
output of the -prepareUninstall command is:
>./silentUpdate.sh
-prepareUninstall
Update installer version 3.2.0.2
Logging details into /opt/ibm/wsam/logs/update/update_20050916213723.log
Action: prepare uninstall
Finished successfully
To clean
results of ‘-prepareUninstall’ command change to the
directory where the update installer scripts are stored and run the following
command:
Windows:
silentUpdate.bat –cleanPrepared
UNIX or Linux:
./silentUpdate.sh –cleanPrepared
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -cleanPrepared
my.properties
UNIX or Linux:
./silentUpdate.sh -cleanPrepared my.properties
A typical
output of the -cleanPrepared command is:
>./silentUpdate.sh
-cleanPrepared
Update installer version 3.2.0.2
Logging details into /opt/IBM/wsam/logs/update/update_20050916213723.log
Action: clean prepared
Finished successfully
It is
recommended that you run the -prepareUninstall
command before uninstalling the update, see the previous section for details.
Before uninstalling
the update you should stop the product that you will update, i.e. the
application server being monitored or the Managing Server components.
After you
stopped the product change to the directory where the update installer scripts
are stored and run the following command:
Windows:
silentUpdate.bat –uninstall
UNIX or Linux:
./silentUpdate.sh -uninstall
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -uninstall my.properties
UNIX or Linux:
./silentUpdate.sh -uninstall
my.properties
A typical
output of the -uninstall command is:
>./silentUpdate.sh
-uninstall
Update installer version 3.2.0.2
Logging details into /opt/ibm/wsam/logs/update/update_20050916213723.log
Action: uninstall
Finished successfully
To rollback
failed uninstallation change to the directory where
the update installer scripts are stored and run the following command:
Windows:
silentUpdate.bat –rollback
UNIX or Linux:
./silentUpdate.sh
–rollback
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -rollback my.properties
UNIX or Linux:
./silentUpdate.sh
-rollback my.properties
A typical
output of the -rollback command is:
>./silentUpdate.sh
-rollback
Update installer version 3.2.0.2
Logging details into /opt/IBM/wsam/logs/update/update_20050916213723.log
Action: rollback
Finished successfully
This
section describes how to display versions of installed Fix Packs and interim
fixes.
The all
necessary information is stored to the product directory under the update sub-directory. You don’t need
the original update package in order to look information about installed
updates. So download the latest update installer and un-tar it:
>tar xvf
WSAM_UpdateInstaller_3.2.0.2.tar
silentUpdate.bat
silentUpdate.properties
silentUpdate.sh
update.jar
Before
running the update installer you should login as root (Administrator) or owner
of the product directory. Then update the environment as below.
The update
installer requires the Java Runtime Environment version 1.3.1 or higher. Either
include the java command into PATH or define the JAVA_HOME environment variable
to point to the Java Runtime Environment home directory.
For
example, on UNIX or Linux, run:
JAVA_HOME=/opt/WebSphere/AppServer/java
export
JAVA_HOME
The update
installer is non-interactive silent installer that works based on the response
file. The default name of the response file is silentUpdate.properties
and it is supplied with the update installer. Update the response file as
follows:
Note: the response file is Java Properties file. Any
backward-slashes should be doubled, for example:
product.location=C:\\Program Files\\IBM\\WSAM
To display
versions of installed Fix Packs and interim fixes change to the directory where
the update installer scripts are stored and run the following command:
Windows:
silentUpdate.bat –displayInstalledUpdates
UNIX or Linux:
./silentUpdate.sh -displayInstalledUpdates
If your
response file is named differently then the default silentUpdate.properties
then specify it as a parameter:
Windows:
silentUpdate.bat -displayInstalledUpdates
my.properties
UNIX or Linux:
./silentUpdate.sh -displayInstalledUpdates my.properties
A typical
output of the - displayInstalledUpdates command is:
>./silentUpdate.sh
- displayInstalledUpdates
Update installer version 3.2.0.2
Logging details into /opt/ibm/wsam/logs/update/update_20060121163339.log
Action: display installed updates
Updates installed 20.02.06 16:53
3.2.2.0.3
Updates installed 20.02.06 16:53
3.2.2.0.2
Updates installed 20.02.06 16:52
3.2.2
Finished successfully