###############################################################################
# Licensed Materials - Property of IBM
# 5724-D33
# IBM Tivoli License Manager
#
# (C) Copyright IBM Corp. 2007.  All Rights Reserved.
#
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
###############################################################################

################################################################################
#
# InstallShield Options File
#
# This file contains values for options that enable the Tivoli License Manager 
# install setup file to be run from the command line. Read the description of 
# each option for information on changing its value.
# 
# A common use of an options file is to run the wizard in silent mode. This lets
# the options file author specify wizard settings without having to run the
# wizard in graphical mode. To use this options file in silent mode, use the
# following command line arguments when running the wizard:
# 
#    -options "./2.3.0-TIV-TLCM-FP0002-Manual-Deployment_response.txt" -silent
#
################################################################################


################################################################################
#
# The wizard settings are described in brief, below. For a full description of 
# each setting see the following manual:
#
#    IBM Tivoli License Manager: Planning, Installation and Configuration
#    (SC32-1431)
#
# If you have a non-English version of the product, this manual may be 
# available in the language of your version; see the product documentation CD 
# or the Tivoli Information Center for details:
#
#    http://publib.boulder.ibm.com/tividd/td/IBMTivoliLicenseManager2.2.html
#
################################################################################


################################################################################
#
# Language Panel: Language
#
# This value can be left blank if the primary language used by the operating 
# system of your computer is among those listed below.
#
# If the primary language of the system is not one of those listed, specify a
# language code from the list below which is already installed as a secondary
# language on your system.
#
# If none of the languages available on your system are in the list below, you
# must install one of them as a secondary language and then deploy the OS/400 
# agent again, specifying here the language you have installed.
# 
# Permitted values are:
# 
#    "2924"    - English
#
#    "2928"    - French
#
#    "2929"    - German
#
#    "2932"    - Italian
#
#    "2962"    - Japanese
#
#    "2986"    - Korean
#
#    "2980"    - Portuguese (Brazil)
#
#    "2989"    - Simplified Chinese
#
#    "2931"    - Spanish
#
#    "2987"    - Traditional Chinese
#
# 
# For example, to choose English Language, use the following:
# 
#    -W setLang.languageCode="2924"
# 

-W setLang.languageCode="2924"


################################################################################
#
# Setup: type
#
# The setup type to be used when installing the product. Permitted values are:
# 
#    Typical   - Typical: The wizard installs the agent using the default configuration.
#              See the Tivoli License Manger Planning, Installation, and Configuration 
#              for details of the defaults.
#
#    Custom    - Custom: The wizard enables you to customize the configuration parameters 
#              before installing the agent.
# 
# For example, to specify that the "Typical" setup type is selected, use the 
# following:
# 
#    -W setupType.selectedSetupTypeId=Typical
# 

-W setupType.selectedSetupTypeId="Custom"


################################################################################
#
# Agent configuration: Organization Name
#
# Type the name of the organization to which the agent will belong.
#
# For example, to supply "IBM" as organization, use the following:
#
#    -W agentConfig.organizationName="IBM"
#

-W agentConfig.organizationName="IBM"


################################################################################
#
# Agent configuration: Runtime Address
#
# Type the hostname or IP address of the runtime server.
#
# For example, to supply "runtime.yourorganization.com" as the runtime
# server host name, use the following:
#
#    -W agentConfig.runtimeAddress="runtime.yourorganization.com"
#

-W agentConfig.runtimeAddress="localhost"


################################################################################
#
# Agent configuration: Division Name
#
# Type the division name.
#
# For example, to supply "yourDivision" as the division name,
# use the following:
#
#    -W agentConfig.divisionName="yourDivision"
#

-W agentConfig.divisionName="yourDivision"


################################################################################
#
# Agent configuration: Startup Mode
#
# Select the startup mode for the agent. After the agent has plugged in to the
# runtime server, the communication mode will be determined by the settings of
# the runtime server (see Tivoli License Manager Planning, Installation, and 
# Configuration for more details).
# Permitted values are:
# 
#   Min  - Indicates that the agent communication will not be secure (HTTP)
#   Med  - secure with Runtime authentication only (using SSL with only Server Authentication feature)
#   Max  - secure with both Agent and Runtime Authentication (using SSL with both Client and 
#                                                             Server Authentication feature)
#
# For example, to supply "min" as the security level,
# use the following:
#
#    -W agentConfig.startupMode="Min"
#


-W agentConfig.startupMode="Min"



################################################################################
#
# Agent configuration: Runtime Port
#
# Type the port that the runtime server uses.
#
# For example, to supply a runtime port number of "80", use the following: 
#   
#    -W agentConfig.runtimePort="80"
#

-W agentConfig.runtimePort="80"


################################################################################
#
# Agent configuration: SSL Port
#
# Type the port that the runtime server uses.
# This Value is ignored if Startup Mode = "nossl".
#
# For example, to supply a runtime port number of "443", use the following: 
#   
#    -W agentConfig.sslPort="443"
#

-W agentConfig.sslPort="443"


################################################################################
#
# Agent configuration: Max Cache Size
#
# The maximum number of bytes that the agent will use to cache files.
# The default value is 2097152.
#
#    -W agentConfig.maxCacheSize="$(agentConfig.maxCacheSize)"  
#

-W agentConfig.maxCacheSize="2097152"


################################################################################
#
# Agent configuration: FIPS Enabled.
#
# Set this value to true if the agent is to use FIPS. 
# 
# Permitted values are:
# 
#     true   - Indicates that the agent is using FIPS 
#     false  - Indicates that the agent is not using FIPS
# 
#    -W agentConfig.fipsEnabled="$(agentConfig.fipsEnabled)"  
#

-W agentConfig.fipsEnabled="false"


################################################################################
#
# Agent configuration: User Proxy
#
# If the agent is not protected by a proxy server, set its value to false,
# otherwise set it to true.
#
# Permitted values are:
# 
#     true   - Indicates that the agent is protected by a proxy server
#     false  - Indicates that the agent is not protected by a proxy server
# 
# For example, if the agent is not protected by a proxy server, use the following:
# 
#    -W agentConfig.useProxy=false
#

-W agentConfig.useProxy="false"



################################################################################
#
# Agent configuration: Proxy Address
#
# Type the address of the proxy server.
# This Value is ignored if useProxy = false.
#
# For example, to supply "proxyAddress.com" as the proxy server,
# use the following:
#
#    -W agentConfig.proxyAddress="proxyAddress.com"
#

-W agentConfig.proxyAddress="none"


################################################################################
#
# Agent configuration: Proxy Port
#
# Type the port number used by the proxy server.
# This Value is ignored if useProxy = false.
#
# For example, to supply a proxy port number of "8080", use the following: 
#   
#    -W agentConfig.proxyPort="8080"
#

-W agentConfig.proxyPort="8080"

################################################################################
#
# Agent configuration: Agent Installation Path
#
# Type the Agent Install Location.
# For example, to supply /opt/tivoli/itlm as install location use the following: 
#   
#    -W agentConfig.installLocation="/opt/tivoli/itlm"
#

-W agentConfig.installLocation=

################################################################################
#
# Agent configuration: Agent Temporary Path
#
# Type the Agent Temporary Directory.
# For example, to supply /tmp/itlm as agent temporary path use the following: 
#   
#    -W agentConfig.agentTmpPath="/tmp/itlm"
#

-W agentConfig.agentTmpPath=

################################################################################
#
# SSL certificate: custom SSL certificate?
#
# This value is ignored if Startup Mode = "nossl".
#
# If you have selected Startup Mode = "ssl" you can choose to provide your own 
# certificate to be used by the agent for secure communications with the 
# runtime server.
#
# Permitted values are:
# 
#     true   - Indicates that you want to provide your own certificate.
#     false  - Indicates that you want to use the embedded test certificate. 
#
# You should note that the embedded test certificate may only be used for
# test purposes as it is in the name of IBM and is insecure (the same 
# certificate is distributed to all customers).
#
# If you select the value "true", you must also supply the certificate pathname
# (sslCert.certFilePath).
#
# For example, to indicate that you want to use your own certificate for SSL
# communication, use the following: 
#   
#    -W sslCert.searchCertDir=true
#

-W sslCert.searchCertDir=false


################################################################################
#
# SSL certificate: custom certificate pathname
#
# This value is ignored if custom SSL certificate = "false" or 
# Startup Mode = "nossl".
#
# If you have selected to supply a custom SSL certificate, 
# (sslCert.searchCertDir = "true"), you must provide the pathname of your 
# own certificate.
#
# The name of the certificate must be "cert.arm".
# If the path contains spaces, enclose the whole path in double-quotes. 
#
# For example, if the pathname of your own certificate is C:\cert.arm, use the 
# following: 
#   
#    -W sslCert.certFilePath="C:\cert.arm"
#

-W sslCert.certFilePath=


################################################################################

# Specify if the Linux390 image is running on CP or IFL processors.
# For example, if your Linux390 image is running on CP use the 
# following: 
#   
#    -W agentConfig.procType="CP"
#

-W agentConfig.procType="CP"


################################################################################
#
# If the Linux390 image is configured to share processors, specify the total number 
# of shared processors (CP or IFL, as appropriate, not both) in the CEC. 
# Enter zero if no shared processors are used by this image.
# For example, if your Linux390 image is configured to share two processors use the 
# following: 
#   
#    -W agentConfig.sharedPoolCap="2"
#

-W agentConfig.sharedPoolCap="2"
################################################################################
#
# Node capacity
# If running on IFL processors this is the total number of IFL processors assigned to the CEC
# If running on CP processors this is the total number of CP processors assigned to the CEC
# For example, if the node capacity is 10,
# enter the following:
#
#   -W agentConfig.sysActProc="10"
#

-W agentConfig.sysActProc="10"

