IBM 4614-0xx,A01,F01 Sureone Flash BIOS Boot Disk
Date 10/24/97

Boot your SureOne(4614-0xx,A01,F01) with this disk.  A message will
tell you it is programming the BIOS.  When programming is completed
successfully remove the diskette and power off. Power back on.

When you power back on the machine you may need to reset
configuration values.   When you see the message PRESS F2 to enter
SETUP, press F2. A fourth options screen has been added.  If you have
a wedge scanner plugged into the PC keyboard port and no external
keyboard select NUMLOCK DISABLE.  Other setup options on the
fourth screen apply only if you have keyboard controller v10 or
greater (You can determine this by watching for the Keyboard EC
level on boot.) Make any other configuration changes unique to your
set up and then press ESC to save your changes and exit.

Please report any problems to your dealer/distributor or IBM directly.

----------------------------------------------------------------------

SureOne  4614 Model 0xx/A01/F01 BIOS History

BIOS     Reason for change

6.12      GA Level
6.13      COM C & D were reversed in SET-UP
6.14      Fix keyboard/scanner lock-ups
          Display keyboard controller code level
          Numlock Enable/Disable Option Added
6.16      Add Options for Keyboard Controller v10:
           -  Typematic Enable/Disable
           -  External Keyboard Active/Inactive
           -  MSR speed select Slow/Medium/Fast
6.17      Fix to increase performance of the 5x86 processor.
          Automatic Rollover to 1/1/2000 implemented.
6.18      To fix and prevent possible LAN EEPROM corruption.
6.19      Add Option for Programmable Keyboard Controller to
          to support Windows NT.