IBM® Rational® Rose® RealTime Solaris 2003.06.14 Patch Release Notes

Version 2003.06.14
Release Date: January 2005
Last Updated: January 23, 2005 

© Copyright IBM Corporation. 1999, 2005.  All Rights Reserved.
Any reproduction or distribution of this work is expressly prohibited without the prior written consent of IBM Corporation. 
Legal Notices Information

Scope
This patch is for Solaris configurations only, and it addresses defects (see Defects Fixed in This Release).
The Patch Release Notes includes:
•	Upgrade information and instructions 
•	Defects fixed in the current patch release (v2003.06.14)
Getting Started
Installation Information
What to do Before Installation
Verify that there is a valid version of Rational Rose RealTime v2003.06.00 installed and ensure that file and directory permissions allow writing to the files listed in Files Included in this Patch.  If you encounter problems during the unzip process regarding read-only files, change the permissions on the file system for all files under <ROSERT_HOME>C/TargetRTS and <ROSERT_HOME>C++/TargetRTS.
If you installed Rational Rose RealTime using a Network or Administrative installation, the patch applies to the server computer only.  Contact your administrator to install this patch.

Note: Some Windows virus checking software will warn you about gzip type files (with a .gz extension). This warning can be safely ignored. There should be no viruses reported during the extraction of the patch files when using WinZip.
How to Install this Patch
You do not need to install the GA-01, GA-02, GA-03, GA-04 or GA-05 patch before installing this patch.
To install the Rational Rose RealTime 2003.06.14 patch:
1.	Ensure there is no running instance of Rational Rose RealTime on the computer you want to update. 
2.	Copy InstallRoseRTSR4Patch.csh and SR4.sun5.1415.tar.gz to your <ROSERT_HOME> directory.
3.	cd to <ROSERT_HOME>
4.	Verify “ROSERT_HOME” environment variable is set to the correct location.
5.	Run the InstallRoseRTSR4Patch.csh script, by entering “./InstallRoseRTSR4Patch.csh”
What to do After Installation
The accompanying .gz and *.csh files from the Service Release are no longer required. However, if you want to retain these files if a re-installation is required, you can move the files to <ROSERT_HOME>/specials. 
Toolset
Run the toolset and ensure that the build number is correct.  In Rational Rose RealTime, click Help > About Rational Rose RealTime and verify that the version number for Rational Rose RealTime is 6.5.1415.0. If the build number is not the same, this Service Release was not applied correctly. 
Code Gen
Note: If you wish to take advantage of the problems fixed in the code generators, you need to rebuild and re-link your models. 
RQA-RT
Note: If you wish to take advantage of the problems fixed in the RQA-RT, you need to rebuild and re-verify your test runs.
RTJava Models
Note: If you wish to take advantage of the problems fixed in the RTJava code generator, you need to rebuild and re-link your Java models.
Model Integrator 
No additional steps are required.
C++ TargetRTS
Note: If you wish to take advantage of the problems fixed in the C++ TargetRTS, you need to rebuild your Target RTS libraries and re-link your models.
C TargetRTS
The fields in the C Structs have be been reordered to remove padding between the fields.  With this change the models using C TargetRTS must be recompiled at all ends (if model deployed, recompile at both server and client sides).  The models compiled with this change may not be compatible with the models compiled earlier. 
C & C++ Models
Note: If you wish to take advantage of the problems fixed in the code generators, you need to rebuild and re-link your models. 
Connexis
Note: If you wish to take advantage of the problems fixed in the DCS, you need to rebuild and re-link your models. 
Targets Requiring Re-Build after Installing this Patch
To determine which TargetRTS or Connexis libraries require immediate rebuilding, please refer to the following directories of your release after installing this Patch.  
o	$ROSERT_HOME/C++/TargetRTS/lib/<config>
o	$ROSERT_HOME/C/TargetRTS/lib/<config>
o	$ROSERT_HOME/Connexis/C++/lib/<config>
If the TargetRTS or Connexis libraries you require have timestamps older than January 11th, it will be necessary for you to rebuild the applicable libraries before utilizing.
Licensing
For additional information on licensing, see You Must Install License Keys to Run this Product.
Run-Time Requirements
o	Solaris Rose RealTime is compatible with Exceed versions 8 and 9.  Utilizing a previous version of Exceed can cause distortions in model displays.
o	When installing on the following Solaris operating system versions, the Solaris C++ Runtime patches are required.  If the necessary patches are not installed the following error may occur and Rose RealTime will not start:

RoseRT: fatal: libCrun.so.1: version `SUNW_1.2' not found

SUN Solaris Operating System Patch Requirements:

o	Solaris 7 – 106300-24 or greater  (This patch also requires 106327-23 or greater)
o	Solaris 8 – 108434-17 or greater
o	Solaris 9 – 111711-11 or greater
Compatibility Issues
For additional information on compatibility issues, see the Product Support section of the Rational Rose RealTime web site at:
http://www.ibm.com/software/rational/support/
Late Changes to Documentation
For the most recent documentation updates, visit the Product Support section of the Rational Rose RealTime web site at:
http://www.ibm.com/software/rational/support/
Where printed documentation exists, always refer to the online Help or PDF versions of the book for the latest updates. 
Enhancements & Changes
Rose RealTime Enhancement
Enhancement to the Rose RealTime Code Editor
Note:  Word-wrap no longer an available or supported option in Rose RealTime Code Editor
o	Automatic Syntax Highlighting

Language Keywords will appear in color.  You may choose a color preference for the automatic syntax highlighting feature, utilizing one of the following options:
•	Change Color for Current Language – Right click on the Code Window and select Font, Color…
•	Configure Color for any Language – Select Tools > Options > Font / Color tab, choose a language option from Code editor Font/Color pick list and click Configure.
o	Automatic Auto Indent

The Rose RealTime Code Editor now automatically appends white spaces / tabs to a new line to create similar indentation to the previous line.
o	Ability to search using regular expressions (and, searching a session) when utilizing Find / Replace capabilities

o	Improved Undo / Redo Capabilities

o	Ability to Enable / Disable Line Numbering
o	To Change Setting for Current Code Window – Right click on the Code Window and select or uncheck Line Numbers
o	To Change Global Settings – Select Tools > Options > Editor, and check or uncheck Display Line Number

o	Ability to Create Custom Tab Size

The length of the tab character can now be varied.  To set the tab size:
o	Select Tools > Options > Editor and set the Tab Size

o	Ability to Expand Tabs with White Spaces

Tab characters may be replaced with white spaces.  To set tab character replacement:

o	Select Tools > Options > Editor and check or uncheck Expand Tabs

o	Improved Code Printing Features (Print Code dialog can be accessed via context menu > File > Print…)
o	Ability to Print Preview Code document (This feature is not available for Browse Header and Browse Body functions)
The following settings are set in the Options tab of the Print Code dialog and are persistent in the registry:
o	Ability to add Header and Footer  - New variables added for Header / Footer ($page, $pages, $title)
o	Ability to Enable / Disable Line Number when printing
o	User Preferences for Color, Tab Size, Line Numbering, Header & Footer are automatically saved in registry when selections made from Toolset.  The default settings for these preferences are located in %ROSERT_HOME%\csyntax.ini and %ROSERT_HOME%\javasyntax.ini.
Code Editor Windows & Dialogs Added or Enhanced
o	Code Window

                                         Original Code Window								New Code Window
o	Open Specification Code Window

                           Original Open Specification Code Window					       New Open Specification Code Window
                             Original Specification Window							New Specification Window
Find / Replace Dialogs now include Regular Expression Searches and the Ability to “Mark All” or Replace In “Whole file”

             Original Find / Replace Dialogs								   New Find / Replace Dialogs

Selection button will be enabled only when there is a selection.  To remove marking created by “Mark All” select context menu > Search > Clear Markings.

o	New Options (Font, Color…, Line Numbers) added to the Documentation/Code (Ctrl+3) window pane (right bottom).

 

o	Capsule Operation, Detail tab, Code window context menu.

Note:  Word Wrap is no longer included in these context menus as an option and is no longer supported.
o	Internal Code Editor Options now available on Options > Editor Property Window

o	Code Editor Font / Color Options Available in the Options > Font / Color Window

o	New Font / Color Configuration Dialog Available 

o	Print Code Dialog now includes “Options Tab”, which is shown below (Can be accessed through Context menu > File > Print…)

Paper Type Selection & Orientation may be accessed through the “Properties…” button.

o	New Print Code > Options Dialog providing user defined settings for Header, Footer and Line Number

o	New Code Print Preview Window Available 

Defects Fixed in This Release
RATLC / APAR ID	Description	
RATLC00045230 RATLC00045807	Unable to differentiate between ports with identical names when inserting a Connector (Capsule Spec). 
New description class to represent Port Roles has been added.  It will display a Port Role using it's name followed by the containing Capsule Role's name in brackets.  The lists presented will now request a "detailed" description of the items in the list vs. the simple name of the items (as requested previously).	
RATLC00238358	Unable to delete Activity Diagram through Capsule Specification dialog.	
RATLC00249084	The full association relation name may not display correctly.	
RATLC00372858	Opening a RoseRT model in which a null pointer was being de-referenced when attempting to draw relation views on the diagram would cause Rose RealTime to crash.	
RATLC00513320	Trigger is not displayed for transition for conjugated ports (if port created as aggregation on class diagram).	
RATLC00515538	Errors when launching Rose RealTime on Windows 2003 / XP Platforms.  Rose RealTime uses HKLM to write it's registry settings.  Since a restricted user does not have write access to HKLM, Rose RealTime does not wok when run under a restricted user. 
Now using HKCU for storing Rose RealTime registry settings.  When Rose RealTime is installed, the installer will add all of the settings in HKLM.  During runtime, Rose RealTime will add changes to the registry entries in HKCU.	
RATLC00515540 / IC39587	Attempting to select "Zoom > Fit In Window" from the diagram window or selecting "Fit to page" in Print dialog and then selecting "Print Preview" for an activity chart (i.e. 8 DIN A4 pages), may cause Rose RealTime to crash.	
RATLC00516276 / IC37365	Upon adding a new Port to a CapsuleStructure there are no warnings or errors shown when a Port with the same name already exists.  When this occurs the model will become inconsistent.  In addition, when loading a model with this issue warnings are shown indicating that duplicate Ports need to be renamed.  However, the StructureDiagram shows multiple PortViews per Port.  
Now an error message "The Name "duplicate_port_name" is illegal because it already exists." is displayed when attempting to add a port with a duplicate name.	
RATLC00516283	Rose RealTime Model Integrator can cause duplicate transitions and junction points.	
RATLC00516562 	New attributes have been added to C and C++ properties.  These changes are in the property files (.pty and .rtpty) found in the folder [ROSERT_HOME]/C and [ROSERT_HOME]/C++.	
RATLC00517294 / IC38263	All RRTEI API's for relocating classes, capsules, etc. from one package to another package should return a boolean value to indicate whether or not the move was successful.  The following API's do not return a boolean value: 
•	RelocateClass
•	Relocate ClassDiagram
•	RelocateLogicalPackage
New methods have been added, equivalent to the methods above, but which will return a boolean value:
•	RelocateClassEx
•	RelocateClassDiagramEx
•	RelocateLogicalPackageEx
Syntax of the new methods are the same as the original methods.	
RATLC00517805 / IC38611	Incorrect components are offered as a choice when attempting to Browser Header / Browse Brody.  You must verify which class the component is associated with to determine which component to select.  If you select the wrong component, you will encounter an error.	
RATLC00518162	RQA-RT executable may crash just prior to end of run.	
RATLC00518863 / IC39179	Rose RealTime Model Integrator will not generate QUID for junction point views upon merging in models created with Rose RealTime 2002.  The following steps, illustrate this behavior: 
1.	Start Rose RealTime 2002
2.	Switch on the generate unique IDs option. 
3.	Create a capsule, add a state and an initial transition to it. 
4.	Save the model (base.rtmdl). 
5.	Add a transition to self to the state. 
6.	Save the model with a new name (2002.rtmdl). 
7.	Study the model file, the junction point views for the junction created at the time of first save have a QUID.  The junction point views created at the time of the second and consequent saves do not have a QUID. 
8.	Open base.rtmdl in Rose RealTime 2003. 
9.	Add a transition. 
10.	Save the model as 2003.rtmdl. 
11.	Merge the base, 2002 and 2003 models, save the result. 
12.	Study the resulting model file. The junction points created in step 5-6 are still missing QUIDs.
Rose RealTime 2002 does not generate QUID for junction point views after the first save.	
RATLC00519064	Enhancement allowing you to toggle transitions from self internal to external.  You may now toggle multiple self transitions from either external to internal or from internal to external using the option from the Parts menu.  You may also toggle single self transitions by right clicking on the self transition and choosing the toggle option from the context menu.	
RATLC00520102 / IC39764	When a Stop build request is made, the code generator stops the build rather than terminating the worker thread.  The termination of the worker thread is instigated by the Rose RealTime viewer when all dependents (including processes) are cleaned.  In this case the process (cmd.exe) which gets created does not terminate therefore Rose RealTime does not terminate the build thread. 
To resolve this issue, the termination of the worker thread is instigated from the code generator.	
RATLC00520462	Request to enable regular expressions in search function. 
The following two new operators are added:
•	"&" = "and"
•	"|" = "or"
To search for '&' and '|' use the escape character, for example to search for '&' the search string will be \&.	
RATLC00520463 / IC40056	Find results not displayed properly when right clicking and selecting "find in browser". 
Now, the parent diagram of the Item view selected is highlighted in the Browser window, when the "Select In Browser" option is selected in the Find Pane.	
RATLC00520597 / IC40273	Model Integrator may produce a corrupt model when merging (i.e. rebasing) the file with Rose RealTime 2003 version 6.5.725.0.  Model Integrator removes pipe "|" characters.  Model Integrator does not handle merged multi line documentation correctly.	
RATLC00521864 / IC40612	The following error message can occur when attempting to open a Rose RealTime model through a workspace using a ClearCase Snapshot view: 
Error:   Could not run script to get source control capabilities: The shell command ""C:\Progra~1\Rational\RoseRe~1\bin\win32\rtperl" -w "C:\Program Files\Rational\Rose RealTime\bin\win32\cmscripts\cc\cm_getcaps"" did not terminate in the specified timeout..
Workaround:  Open the *.rtmdl file and turn on SourceControl after the model is loaded.	
RATLC00522023 /
 IC40673	The Rose RealTime C TargetRTS Build flat option does not include header files from $ROSERT_HOME/C/TargetRTS/build-<your config>. 
Workaround:  Add the following line to your config.mk file:
TARGETCCFLAGS = $(INCLUDE_TAG)"$(RTS_HOME)/build-$(TARGET).$(LIBRARY_SET) "	
RATLC00522046	Rose RealTime C TargetRTS build flat option does not copy RSL.h and UMLRT.h to the build-<your config>/RTPubl directory. 
When building the Rose RealTime C TargetRTS flat, Rose RealTime regenerates the TargetRTS header files in the directory $ROSERT_HOME/C/TargetRTS/build-<your config>.  All the #include <...> have been changed to #include "...".  Unfortunately, two header files in $ROSERT_HOME/C/TargetRTS/include/RTPubl are not regenerated (RSL.h and UMLRT.h).
Workarounds:  Modifying RSL.h and UMLRT.h and placing them in libset/<your_libset>/RTPubl or changing the two files in include/RTPubl to use #include "...".	
RATLC00522099 / IC41974	RT Publ/CapClass.h:  struct_RTCapsule_class should be rearranged to remove padding inserted for alignment. 
NOTE:  With this change the models using C TargetRTS must be recompiled. The models compiled with this change may not be compatible with the models compiled earlier	
RATLC00522227
RATLC00524492	Enhancement providing ability to paste messages in Sequence Diagram in any location rather than just to the end of the role lifeline. 
Three new menu items are added to the Sequence Diagram context menu.  These menu items will be highlighted when right-clicking on a message:
1.	Copy a message  (To copy a right-clicked message to Copy Buffer)
2.	Insert Before:  (Insert a copied message(s) before a message)
3.	Insert After:  (Insert a copied message(s) after a message)	
RATLC00522973 / IC41068	Unable to compile classes with a nested class, which is protected or private. 
If the type descriptors are generated of non-public nested classes, the generated class files will not compile.  This is due the design of the type descriptor structure. 
Now, for non-public nested classes a warning is displayed indicating that type-descriptors are not generated for this class rather than generating the descriptors silently.	
RATLC00523798 / IC41976	C TargetRTS RTPubl/Message.h padding warning when compiling the C TargetRTS with the Cygwin compiler and the -W padded option.	
RATLC00524571 / IC41470	Connexis enabled application may cause exception when deregistering SPPs on shutdown. 
Workaround:
1.	Rebuild the DCS library with RTD_STATISTICS=0.  This causes the two SPPs cnxMetrics and vuMetrics not to be registered.
2.	Modify your model so that the Top Capsule contains the RTDBase and another capsule representing the rest of the model.  Make the application capsule optional and make sure it is destroyed before the context abort is called which destroys the RTDBase capsule.	
RATLC00525237 / IC41575	Using Rose RealTime C, Timer_data_union doesn't compile when RTMESSAGE_PAYLOAD_SIZE=0. 
Timer_data_union.rtclass has been changed. The models need to be re-compiled at both ends ((if model deployed, recompile at both server and client sides).	
RATLC00525328 / IC41600	Rose RealTime link errors may occur due to the fact that the link order is determined by the order that the dependencies were added to the packages.  Prior to Rose RealTime 2003, the order was based on the order of the dependencies added.  Those added first were linked first.  In Rose RealTime 2003 the reverse order is applied, which may cause link failures.	
RATLC00525351 / IC41665	Rose RealTime / SoDA generated Sequence Diagrams are not identical.   
In Rose RealTime, if the Sequence Diagram includes many arguments (args) to the method, the method signature is drawn as method (arg1, arg2, ...).  However when the SoDA report is generated all the parameters are completely displayed which makes the report difficult to read.	
RATLC00526175 / IC41994	RTProtocol::size() crash on Connexis 
Rose RealTime applications may crash while calling port > size, when disconnections and reconnections of ports occur frequently.	
RATLC00526263 / IC42051	The size of activities in Activity Diagram elongate when launching Rose RealTime by double-clicking on the *.rtwks file.	
RATLC00526855 / IC42203	Rose RealTime C generates incorrect code if the end names of two or more aggregations are the same. 	
RATLC00529128 / IC42948	Rose RealTime TargetRTS may read and write to deleted memory.	
RATLC00516671 / IC39198	Running Build > Add Class Dependencies may cause Rose to crash, displaying the following in a stack trace Unix exception: __1cKRoseStringOFormatMessageA6Mpkcppv_v_.	
RATLC00959990	Rose RealTime Model Integrator does not correctly handle conflicts when two new interactions have the same interaction number.	

Known Issues
RATLC / APAR ID	Description	
RATLC00141357	Models do not display correctly, using Exceed V6.1.  It is necessary to use Exceed versions 8 or 9.	
RATLC00210339 / IC39660	Rose RealTime Web Publisher can consume a large amount of memory when Web Publishing large models.	
RATLC00246172 / IC41967	Analysis RRTEI Collection classes will not work correctly with out-of-proc calls.	
RATLC00515542 / IC37530	Rose RealTime Web Publisher may not publish Activity Diagrams correctly.	
RATLC00516159 / IC41774	The RRTEI functions componet.AddInclusionPath and component.AddUserLibrary do not function as expected.  Both functions return true which indicates that the inclusion / userlibrary has been created although it has not been.

Workaround:  Locate the property in the RRTEI associated with the data to be updated (i.e. "inclusion path") and override the value.	
RATLC00516547	Enhancement request for Rose RealTime Model Integrator to establish dependency information between nodes and automatically resolve dependent nodes and hide properties of little interest.	
RATLC00520561 / IC40188	Unable to rename a package using some Chinese characters when running Rose RealTime on Simplified Chinese or on English Windows with the system default locale set to Simplified Chinese.	
RATLC00523150 / IC41231	In Rose RealTime CPP, making a change to a large source file and subsequently requesting a codesync may cause Rose RealTime to hang.	
RATLC00526499 / IC42118	Connexis CRM connection not re-established in certain situations.	
 
Files changed by this release
Note:  Files listed below are located in <ROSERT_HOME>.
C/TargetRTS/lib/NoRTOSS.sparc-gnu-2.8.1/*
C/TargetRTS/lib/NoRTOSS.x86-VisualC++-6.0/*
C/TargetRTS/lib/NoRTOSS.x86-gnu-3.2/*
C/TargetRTS/lib/OSE411T.ppc603-Diab-4.3f/*
C/TargetRTS/lib/OSE411T.sparc-gnu-2.95.1/*
C/TargetRTS/lib/OSE411T.x86-VisualC++-6.0/*
C/TargetRTS/lib/SUN5S.sparc-SunC-5.0/*
C/TargetRTS/lib/SUN5S.sparc-gnu-2.8.1/*
C/TargetRTS/lib/SUN5T.sparc-SunC-5.0/*
C/TargetRTS/lib/SUN5T.sparc-gnu-2.8.1/*
C/TargetRTS/lib/TORNADO22T.ppc603-Diab-5.0.1/*
C/TargetRTS/lib/TORNADO22T.ppc603-gnu-2.96/*
C/TargetRTS/lib/TORNADO22T.simnt-gnu-2.96/*
C/TargetRTS/lib/TORNADO22T.simsparcsolaris-gnu-2.96/*
C/TargetRTS/lib/TORNADO2S.m68040-cygnus-2.7.2-960126/*
C/TargetRTS/lib/TORNADO2S.ppc-cygnus-2.7.2-960126/*
C/TargetRTS/lib/TORNADO2S.x86-cygnus-2.7.2-960126/*
C/TargetRTS/lib/TORNADO2T.m68040-cygnus-2.7.2-960126/*
C/TargetRTS/lib/TORNADO2T.ppc-cygnus-2.7.2-960126/*
C/TargetRTS/lib/TORNADO2T.x86-cygnus-2.7.2-960126/*
C/TargetRTS/lib/eCos20020128_uITRON302T.x86-gnu-2.95.3/*
C/TargetRTS/config/TORNADO22T.simsparcsolaris-gnu-2.96/config.mk
C/TargetRTS/include/RTPubl/SystDesc.h
C/TargetRTS/include/RTPubl/Message.h
C/TargetRTS/include/RTPubl/ThrdDesc.h
C/TargetRTS/include/RTPubl/Decoding.h
C/TargetRTS/include/RTPubl/Control.h
C/TargetRTS/include/RTPubl/CapClass.h
C/TargetRTS/include/RTPubl/Capsule.h
C/TargetRTS/include/RTPubl/MsgQueue.inl
C/TargetRTS/include/RTPubl/Version.h
C/TargetRTS/include/RTPubl/Main.h
C/TargetRTS/libset/ppc603-gnu-2.96/libset.mk
C/TargetRTS/libset/m68040-cygnus-2.7.2-960126/libset.mk
C/TargetRTS/libset/ppc-cygnus-2.7.2-960126/libset.mk
C/TargetRTS/src/include/RTPriv/DebugInp.h
C/TargetRTS/src/include/RTPriv/MsgBlock.h
C/TargetRTS/src/include/RTPriv/LayerCon.h
C/TargetRTS/src/include/RTPriv/Debugger.h
C/TargetRTS/src/Message/static.c
C/TargetRTS/src/main.mk
C/TargetRTS/src/main.nmk
C/TargetRTS/src/Build.pl
C/TargetRTS/src/DaemInfo/setInfo.c
C/RTCClasses/TimerPackage/Timer_data_union.rtclass
C/c.pty
C/CTargetRSL.rtpty
####C++ Targets and libraries
C++/TargetRTS/lib/CHORUS40T.ppc603-egcs-2.91.66/*
C++/TargetRTS/lib/LYNX30T.ppc-cygnus-2.7-97r1/*
C++/TargetRTS/lib/LYNX30T.x86-cygnus-2.7-97r1/*
C++/TargetRTS/lib/LYNX31T.ppc-gnupro-2.9-98r2/*
C++/TargetRTS/lib/NUCLEUS11T.x86-VisualC++-6.0/*
C++/TargetRTS/lib/NoRTOSS.sparc-gnu-2.8.1/*
C++/TargetRTS/lib/NoRTOSS.x86-VisualC++-6.0/*
C++/TargetRTS/lib/NoRTOSS.x86-gnu-3.2/*
C++/TargetRTS/lib/OSE411T.ppc603-Diab-4.3f/*
C++/TargetRTS/lib/OSE411T.sparc-gnu-2.95.1/*
C++/TargetRTS/lib/OSE411T.x86-VisualC++-6.0/*
C++/TargetRTS/lib/SUN5T.sparc-SunC++-5.0/*
C++/TargetRTS/lib/SUN5T.sparc-SunC++-5.3/*
C++/TargetRTS/lib/SUN5T.sparc-gnu-2.8.1/*
C++/TargetRTS/lib/SUN5T.sparc-gnu-2.95.1/*
C++/TargetRTS/lib/SUN5T.sparc-gnu-3.0.4/*
C++/TargetRTS/lib/TORNADO22T.ppc603-Diab-5.0.1/*
C++/TargetRTS/lib/TORNADO22T.ppc603-gnu-2.96/*
C++/TargetRTS/lib/TORNADO22T.simnt-gnu-2.96/*
C++/TargetRTS/lib/TORNADO22T.simsparcsolaris-gnu-2.96/*
C++/TargetRTS/lib/TORNADO2T.m68040-cygnus-2.7.2-960126/*
C++/TargetRTS/lib/TORNADO2T.ppc-cygnus-2.7.2-960126/*
C++/TargetRTS/lib/TORNADO2T.ppc860-cygnus-2.7.2-960126/*
C++/TargetRTS/lib/TORNADO2T.simpc-egcs-2.90.29/*
C++/TargetRTS/lib/TORNADO2T.simso-cygnus-2.7.2-960126/*
C++/TargetRTS/lib/TORNADO2T.x86-cygnus-2.7.2-960126/*
C++/TargetRTS/include/RTVersion.h
C++/TargetRTS/libset/ppc603-gnu-2.96/libset.mk
C++/TargetRTS/src/RTLocalConnector/spp_deregister.cc
C++/TargetRTS/src/RTActor/predestroy.cc
C++/TargetRTS/src/Rational.mk
C++/cpp.pty
C++/C++TargetRTS.rtpty
####Connexis libraries
Connexis/C++/lib/LYNX30T.ppc-cygnus-2.7-97r1/libDCS.a
Connexis/C++/lib/LYNX30T.x86-cygnus-2.7-97r1/libDCS.a
Connexis/C++/lib/OSE411T.sparc-gnu-2.95.1/libDCS.a
Connexis/C++/lib/SUN5T.sparc-SunC++-5.0/libDCS.a
Connexis/C++/lib/SUN5T.sparc-gnu-2.8.1/libDCS.a
Connexis/C++/lib/SUN5T.sparc-gnu-2.95.1/libDCS.a
Connexis/C++/lib/TORNADO2T.simso-cygnus-2.7.2-960126/libDCS.a
Connexis/C++/lib/TORNADO2T.ppc860-cygnus-2.7.2-960126/libDCS.a
Connexis/C++/lib/TORNADO2T.ppc-cygnus-2.7.2-960126/libDCS.a
Connexis/C++/examples/MetricsCollector.rtmdl
Connexis/bin/sun5/ConnexisViewer
Connexis/bin/sun5/ConnexisViewer.rsb
Connexis/bin/sun5/connexis.rsb
Connexis/bin/sun5/libconnexis.so
Connexis/bin/sun5/libTraceData.so
Connexis/Model/DCS.rtmdl
RQART/bin/sun5/librqart.so
RQART/bin/sun5/rqart.rsb
RQART/bin/sun5/rqart.tlb
WebPublisher/sun5/rosertwebpub.rsb
WebPublisher/sun5/librosertwebpub.so
bin/sun5/summit/cm.rsb
bin/sun5/summit/dc.rsb
bin/sun5/summit/dd.rsb
bin/sun5/summit/dg22.rsb
bin/sun5/summit/libcm.so
bin/sun5/summit/libdc.so
bin/sun5/summit/libdd.so
bin/sun5/summit/libdg22.so
bin/sun5/summit/libol.so
bin/sun5/summit/libpb.so
bin/sun5/summit/librun.so
bin/sun5/summit/libscx.so
bin/sun5/summit/libunasm.so
bin/sun5/summit/ol.rsb
bin/sun5/summit/pb.rsb
bin/sun5/summit/run.rsb
bin/sun5/summit/scx.rsb
bin/sun5/summit/unasm.rsb
bin/sun5/summit/libsummittl.so
bin/sun5/summit/summittl.rsb
bin/sun5/summit/fe.rsb
bin/sun5/makefile.dll
bin/sun5/addexternaljava.so
bin/sun5/addexternaljava.rsb
bin/sun5/addexternaljava.tlb
bin/sun5/externallibrarywizard.so
bin/sun5/externallibrarywizard.rsb
bin/sun5/externallibrarywizard.tlb
bin/sun5/rtwizards.rsb
bin/sun5/rtwizards.tlb
bin/sun5/librtwizards.so
bin/RoseRT
bin/sun5/RationalRose.tlb
bin/sun5/RationalRoseRT.tlb
bin/sun5/RoseRT
bin/sun5/RoseRT.rsb
bin/sun5/rtcppbld.dll
bin/sun5/rtcppbld.rsb
bin/sun5/rtcbld.dll
bin/sun5/rtcbld.rsb
bin/sun5/rtjavaui.dll
bin/sun5/rtjavaui.rsb
bin/sun5/rtjavagen
bin/sun5/rtrun
bin/sun5/rtcppgen
bin/sun5/rtcgen
bin/sun5/modelintRT
bin/sun5/modelintRT.rsb
bin/sun5/xxgdb.rsb
bin/sun5/libxxgdb.dll
bin/sun5/TornadoAE.rsb
bin/sun5/libTornadoAE.dll
bin/sun5/Tornado2.rsb
bin/sun5/libTornado2.dll
bin/sun5/Tornado.rsb
bin/sun5/libTornado.dll
bin/sun5/liboe70as.so
bin/sun5/libotp80as.so
bin/sun5/libsfl20as.so
bin/sun5/oe70as.rsb
bin/sun5/otp80as.rsb
bin/sun5/sfl20as.rsb
bin/analyzer
bin/analyzer.init
csyntax.ini
javasyntax.ini
Contacting IBM Rational Software Support
The IBM software support Internet site provides you with self-help resources and electronic problem submission. The IBM Software Support homepage can be found at http://www.ibm.com/software/support.
Voice Support is available to all current contract holders via a telephone number in your country (where available). For specific country phone numbers, please refer to the IBM Software Support Handbook, Appendix B: Contact Information, found at http://www.ibm.com/software/support.