######################################################################## # # # COMPONENT_NAME: MQSeries Integrator for AIX # # # # FILE: MEMO.PTF # # # # Program Number 5765-D66 # # (C) COPYRIGHT International Business Machines Corp. 1999, 2000 # # All Rights Reserved # # Licensed Material - Property of IBM # # # # US Government Users Restricted Rights - Use, duplication or # # disclosure restricted by GSA ADP Schedule Contract with IBM Corp. # # # ######################################################################## PTF Memo for IBM MQSeries Integrator Version 2.0.1 for AIX ---------------------------------------------------------- The memo.ptf file contains information you need for updating IBM MQSeries Integrator Version 2.0.1 for AIX. This memo.ptf file corresponds to the third CSD which is defined as PTF U476289 and is divided into the following sections: o Installation and maintenance information o Documentation changes o Special information o Service and technical support o CSD history ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ INSTALLATION AND MAINTENANCE INFORMATION ---------------------------------------- In order to restore a previous level you must backup replaced files. CSD03 requires approximately 70MB of disk space to do this. APPLYING MAINTENANCE ____________________ Maintenance updates are supplied on CD in the form of a Program Temporary Fix (PTF), referred to as a Corrective Service Diskette (CSD). You can find the latest information about available CSDs on the Internet, at this address: http://www.ibm.com/software/ts/mqseries/ You can also download CSDs from this web site. APPLYING THE MAINTENANCE INFORMATION ____________________________________ Follow these instructions if you need to apply maintenance to your installation of MQSeries Integrator. 1. Ensure that you are logged on as root 2. Ensure that MQSI is stopped 3.a. Type smitty b. Select Software Installation and Maintenance Install and Update Software Update Installed Software to Latest Level (Update All) or use the fastpath command smitty update_all c. Either, enter the directory where the update images are, or press PF4 and select the appropriate device (for example, if installing from CD-ROM). d. Decide whether or not you want to commit the update by selecting the appropriate response in the COMMIT software updates field. If you answer Yes you will not be able to restore the previous level of the product without uninstalling it. Answering No will backup the replaced files so that you can reject the update and return to the original level of the product, (see 'Committing updates'). e. Press the Enter key to perform the update 4.When you have completed installation, review the memo.ptf file supplied as part of the CSD in /opt/mqsi. NOTE: CSDs are cumulative, therefore you do not need to apply CSD1 before you can apply CSD2. When you have installed a CSD, you are prevented from installing a previous CSD without first restoring the system using the backed-up files. RESTORING A PREVIOUS SERVICE LEVEL __________________________________ You are able to restore a previous service level if you want to, or if you are instructed to do so by your IBM Support Center. However, this is only possible if you accepted the default action to backup replaced files when you applied the current service level (see the instructions in Applying maintenance on AIX). Carry out the following procedure: 1. Type smitty 2. Select Software Maintenance and Installation Software Maintenance and Utilities Reject Applied Software Updates (Use Previous Version) or use the fastpath command smitty reject 3. In the SOFTWARE name field type mqsi 4. Press the Enter key to remove the update COMMITTING UPDATES __________________ If you no longer need the ability to restore the product to a previous level, or want to save disk space, you can commit the update. This removes the files you backed up when the update was applied. To do this on AIX: 1. Type smitty 2. Select Software Maintenance and Installation Install and Update Software Commit Applied Software Updates (Remove Saved Files) or use the fastpath command smitty commit 3. In the SOFTWARE name field type mqsi 4. Press the Enter key to commit the update INSTALLING NEW COMPONENTS AFTER APPLYING MAINTENANCE ____________________________________________________ If you install maintenance and then decide to install a new component from the MQSeries Integrator CD, you will be advised that you must reapply the maintenance following installation of the new component. You are strongly recommended to do this: if you do not, it is likely that the integrity of the product files will be compromised and unexpected results might ensue. FAILURE DURING THE APPLICATION OF MAINTENANCE _____________________________________________ If you have a failure when you apply a CSD (for example, a power failure), the product files are likely to be in an unknown state. You must rerun the installation of the maintenance (to completion) before using the product. CHECKING THE SERVICE LEVEL __________________________ After initial installation, the MQSeries Integrator Service level indicates that no service has been applied. After one or more updates, the service level is updated to show the CSD most recently applied. The service level is expressed in terms of the PTF number for a particular CSD. To check the service level on AIX: 1. Type smitty 2. Select Software Maintenance and Installation Software Maintenance and Utilities List Software and Related Information List Installed Software and Related Information List Installed Software or use the fastpath command smitty list_installed_sw 3. In the SOFTWARE Name field, enter mqsi\? 4. Press the Enter key APPLYING MAINTENANCE TO IBM DB2 UNIVERSAL DATABASE __________________________________________________ If DB2 was installed on this system by the MQSeries Integrator installation program, it is installed with no service applied. You can also obtain information about the current status of maintenance of this product, and download fix packs for DB2 from this Web site: http://www.ibm.com/software/data/db2/udb/ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ DOCUMENTATION CHANGES --------------------- IY18146 - IF THE BROKERDB IS ORACLE, ADDITIONAL NLSPATH IS REQUIRED. When the environment is set to a Japanese code page the broker will not start. This is because Oracle cannot be accessed when running in the Japanese code page. When using an Oracle Database on UNIX, the following environment variables must be set to ensure the broker starts cleanly: LC_MESSAGES=en_US LANG=en_US Alternatively, en_GB also works. This information will be added to the MQSeries Integrator Installation Guide. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IY17772 - AFTER UPGRADE MQSI VERSION F/V1.1 T/V2.0.1, MQSI BROKER HANG IN CASE OF USING USEREXIT PROGRAM. The MQSI V2.0.1 Administration Guide incorrectly states "If you are currently using user exits with MQSeries Integrator Version 1.1, your exits will work unchanged." This is not the case. The MQSeries Integrator V2.0.1 Administration Guide, Chapter 9, Previous versions of MQSeries Integrator, Version 1, User exits (SC34579204) has been corrected to read: If you are currently using user exits with MQSeries Integrator Version 1.1, you must re-compile them as multi-thread objects which MUST link with multi-thread (thread-safe) libraries. Failure to do this will result in unpredictable errors. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IY14970 - DOCUMENTATION INCORRECT/NEEDS CHANGE ON COMPILERS SUPPORTED BY MQSI V2.0.1 FOR SUN SOLARIS The list of supported compilers in the MQSI V2.0.1 Installation Guide is incorrect. The MQSeries Integrator for Sun Solaris Installation Guide V2.0.1, GC34-5842-02, Chapter 2. Planning for Installation, System setup,Software Requirements, Optional products Application programming support has been corrected to read:- The following software compilers are supported: o Sun WorkShop Compiler C Version 5.0 o Sun WorkShop Compiler C++ Version 5.0 o Micro Focus COBOL compiler Version 4.0 for UNIX ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IC28446 - INSTALL GUIDE DOES NOT DESCRIBE MQSI_PARAMETERS_FILE VARIABLE The environment variable MQSI_PARAMETERS_FILE is not documented in the MQSeries Integrator Version 2 Installation Guides. The environment variable MQSI_PARAMETERS_FILE is documented in the MQSeries Introduction and Planning book, GC34-5599-01, Appendix A, Planning for migration and integration, MQSeries Integrator Version 1, Run-time section. This will be added to the MQSeries Integrator Version 2 Installation Guides, GC345841 (AIX), GC345864 (Solaris) and GC345600 (NT). ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IC28447 - INSTALL GUIDE HAS INCORRECT NAMES FOR NT CONSISTENCY CHECKER The Windows NT Installation Guide has incorrect file names in the Windows NT consistency checker commands. The MQSeries Integrator for Windows NT Installation Guide V2.0.1, GC34-5600-01, Appendix D. using NEONFormatter and NEONRules Nodes, Migrating rules and formats, Checking consistency will be corrected for Windows NT as follows:- Oracle formatcc110.cmd >formatcc110.log rulescc110.cmd >rulescc110.log Sybase and SQL Server formatcc110.cmd >formatcc110.log rulescc110.cmd >rulescc110.log DB2 formatcc110.cmd >formatcc110.log rulescc110.cmd >rulescc110.log ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IY14720 - MSGBIP2301E WHEN A BROKER TRIES TO LOAD THE MQSI SAMPLE PLUGIN NODE BIPSAMPPLUGINNODE Plug-in node documentation in the Programming Guide is missing the object file name. The MQSeries Integrator Programming Guide V2.0.1, Part 2, Programming a plug-in node or parser; Chapter 6, Implementing a plug-in node or parser, Compiling a plug-in will be corrected. The section, Compilation, sub section Compiling on AIX will be changed to include the object file name AS FOLLOWS:- xlc_r -bM:SRE -bexpall -bnoentry -o BipSampPluginNode.lil -L /lib -l imbdfplg BipSampPluginNode.o ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IY14540 - AIX BROKER CONFIGURATION LIBPATH MODIFICATION MISSING IN DOCUME The Installation Guide does not include the LIBPATH required for creation of a broker on AIX. The MQSeries Integrator for AIX Installation Guide V2.0.1, Appendix A, System changes after installation, Environment variables, will have LIBPATH added to the list needing to be set, for example set LIBPATH=/usr/mqsi/merant/lib ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 11318 - Implement ICU 1.6 for enhanced EUC support The latest version ICU 1.6 incorporates a new mechanism for packaging ICU data in the form of a shared DLL with the benefit of improved performance. The new release has improved locale support including support for EUC and further OS390 code pages. For a full list of supported code pages see file README.CCSID in /opt/mqsi ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ SPECIAL INFORMATION ------------------- CSD03 (PTF U476289) ___________________ IC29727 - CREATE CONFIGMGR FAILS WHEN A USERID USED TO ACCESS THE MRMDB CONTAINS A $ (DOLLAR) SIGN PREFIX An attempt to run the 'mqsicreateconfigmgr' command, using as a parameter a user id beginning with a $ (dollar) sign, causes the command to fail with a BIP1801S error. This problem may also occur when other non-alphanumeric characters are used. Until this problem is fully investigated and resolved, it is recommended that customers restrict characters of the MQSI service user ids to the letters A to Z, a to z and numbers 0 to 9. It is our belief that in most cases, user ids already conform to this rule. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IC30497 - ERRORS OCCURRING DURING MQSI GUI CONNECTION TO ORACLE 8.1.6 NEON DATABASE Errors occurr during MQSI V1.1 GUI connection to AN Oracle 8.1.6 (or later) NEON database. The MQSI GUI crashes with no error message. To connect to an Oracle 8.1.6 database, and above, via the MQSI Formatter or Rules GUI, customers will need to choose the ORACLE 7.3 option from the DBMS pull-down menu. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IC29775 - MQSI BROKER DO NOT PASS THE MQMD CONTEXT INFORMATION WHEN A MESSAGE IS PUT TO THE BACKOUT OR DEAD LETTER QUEUE. The MQSI broker dataflowengine does not propagate the context information from the MQMD when the message is put to the backout or dead letter queue. This problem is now resolved. Prior to this fix, if a message was sent to the backout queue or the dead letter queue by the MQInput node, then the MQ Identity context was re-generated, not passed on. The context in the backout queue has now been changed to be PASS_ALL. The fields affected by this change are UserIdentifier, AccountingToken and ApplIdentityData. The MQPUT is now called with MQPMO_PASS_ALL_CONTEXT. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ IY21179 - DFE CONSUMING HIGH CPU AND HANGING WITH NO ERRORS A message flow that processed a message successfully on NT failed to complete on AIX. This was due to a stack overflow problem on AIX. On Unix platforms, MQSI overrides the default thread stack size and allocates a stack size of 1MB to each thread. On NT, MQSI does not override the default thread stack which is sufficiently high at 2MB. This problem has been fixed by allowing the default thread stack size of 1MB on Unix platforms to be overridden by use of a new environment variable:- MQSI_THREAD_STACK_SIZE The stack size should be specified in bytes, so to set the thread stack size to 2MB for example, set the following in the environment from which the Broker will be started: MQSI_THREAD_STACK_SIZE=2000000 export MQSI_THREAD_STACK_SIZE This environment variable is only applicable on the Unix platforms. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ CSD02 (PTF U474405) ___________________ IC28810 - SUBSCRIPTIONS WON'T SHOW UP FOR A SINGLE USERID The fix for this problem has removed the lowercaseing applied by the Control Centre on the user identifier (userid) in Subscriptions View; userid has become case sensitive. In order to display subscriptions it is now necessary to respect the case of the userid to get its subscriptions in the view. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ CSD01 (PTF U472858) ___________________ IY13468 - DEFECT IN CLI IN REGARDS TO HOW WE DETERMINE THE CTX USED AT THE ENVIRONMENT LEVEL. Broker not stopping after an mqsistop command has been issued An intermittent problem has been discovered on AIX and Sun Solaris where the broker may not shutdown following the issuing of the mqsistop command (without the -i option). This is only a problem when using DB2 as a broker or customer database. If you encounter such a symptom, then the broker should be able to be successfully shutdown by re-issuing an mqsistop command, specifying the -i option. This problem has been raised against DB2 as APAR IY13468. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 9049 - MRMB31 Memory leak associated with datasource keyword. During a redeploy operation to a running broker, a memory leak could occur under certain situations. This fix addresses this problem. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 13135 - XML white space on tree copies to NameVal parsers The following information will be added to Appendix C of the MQSeries Integrator Using the Control Center V2.0.1 book, SC34-5602-01. Copying messages between parsers Compute node expressions can copy part of an input message to an output message. The results of such a copy depend upon the type of input and output parsers involved. Like parsers Where both the source and target messages have the same folder structure at root level, a "like-parser-copy" is performed. For example: SET OutputRoot.MQMD = InputRoot.MQMD; will result in all the children in the MQMD folder of the input message being copied to the MQMD folder of the output message. Another example of a tree structure which will support a like-parser-copy is: SET OutputRoot.XML.Data.Account = InputRoot.XML.Customer.Bank.Data; Unlike Parsers Where the source and target messages have different folder structures at root level, it is not possible to make an exact copy of the message source. Instead, the "unlike-parser-copy" views the source message as a set of nested folders terminated by a leaf name-value pair. For example, copying the following message from XML to MTI: Value31Value32 will produce a name element "Name3", and a name-value element called "Name31" with the value "Value31". Note: The second XML pcdata (Value32) cannot be represented and will be discarded. The unlike-parser-copy scans the source tree, and copies folders, also known as name elements, and leaf name-value pairs. Everything else, including elements flagged as "special" by the source parser, will not be copied. An example of a tree structure resulting in an unlike-parser-copy is: SET OutputRoot.MTI.Data.Account = InputRoot.XML.Data.Account; Note: If the algorithm used to make an unlike-parser-copy does not suit your tree structure, it might be necessary to further qualify the source field to restrict the amount of tree copied. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 13137 - cpiCreateContext() called for each message parsed When running a broker which receives messages which are parsed using a plugin parser, then the parsers implementation function, cpiCreateContext() was being called multiple times on the same thread. This function should be invoked once only, on creation of the instance of the parser. Instead, the function was being called each time a message was received. This could cause problems in the operation of the parser, depending on the way in which that parser was implemented. One known possible side-effect would be to provoke a memory leak. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 13300 - ODBCINI must not be set on login accounts If, on AIX and Sun Solaris systems you have previously installed an ODBC driver from Merant, then you must ensure that the UNIX environment variable ODBCINI is NOT set on any login accounts used to create or start message brokers. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ SERVICE AND TECHNICAL SUPPORT ----------------------------- This is the first release of product 5765D6600, IBM MQSeries Integrator Version 2.0.1 for AIX. The following APARs have been incorporated into it. Name Abstract IC27033 - TRACE DOES NOT SHOW CORRECT DATA - XML STATEMENT WITH A NULL IC27038 - ADD MAPPING IN AN OUTPUT MESSAGE COMPUTE NODE IS NOT POSSIBLE IC27068 - REGISTER A SUBSCRIPTION GIVES THE EVENT ERROR 7053 -UNEXPECTED IC26734 - SQL ERRORS OCCUR WHEN WORKING WITH DATABASEUPDATE NODE IC26799 - BIP2293 WHEN DEPLOYING A MESSAGE USING PLUG-IN PARSER IC26880 - FAILURE TO START/STOP ALL MESSAGE FLOWS FOR AN EXECUTION GRP IC26952 - CREATION OF RESPONSE MSG FAILS DUE TO NULL NAMEVALUECCSID The MQSeries support page is located at: http://www.ibm.com/software/ts/mqseries/support from which you can obtain the latest information about various MQSeries topics including :- - Hints and Tips - APARs and Fix Packages - FAQs - Support downloads - Newsgroups For the latest versions of MQSI V2.0.1 documentation see the following Web page on the MQSeries Web site: http://www.ibm.com/software/ts/mqseries/library/manualsa/ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ CSD HISTORY =========== CSD03 (PTF U476289) ___________________ This is the third PTF for IBM MQSeries Integrator Version 2.0.1 for AIX. It is delivered via PTF U476289 for APAR IY18812. It contains fixes for ALL the problems listed below: Name Abstract IY18812 - CUMULATIVE MAINT #03 FOR MQSERIES INTEGRATOR FOR AIX V201 IC28463 - LENGTH FUNCTION NOT WORKING IF THE ELEMENT ARRIVE WITH A DATA O IC29210 - MQSIMRMCOPYMSGSET CHANGES TWO ATTRIBUTES OF THE COPY IT MAKES IC29235 - SPURIOUS ESQL SYNTAX ERROR IN COMPUTE NODE WHEN SETTING A FIELD IC29416 - COMPUTE NODE ADD MAPPING TO MRM LAYOUT GENERATES BAD ESQL IC29489 - DBCS MESSAGES WERE NOT CONVERT CORRECTLY FROM PC CODEPAGE TO HO IC29632 - MQSI - INCORRECT STRUCLENGTH AND NAMEVALUELENGTH IN RFH2 LOOP IC29775 - MQSI BROKER DO NOT PASS THE MQMD CONTEXT INFORMATION WHEN A IC29801 - MQSI V2 FAILS TO RECONNECT AFTER ORACLE HAS BEEN BOUNCED IC29992 - IF DEFAULTHEX IN THE DB TABLE HAS 1000 BYTES OR MORE THEN SPACE IC30011 - INCORRECT MESSAGES, WHICH ARE SENT TO THE FAILURE-TERMINAL OF A IC30171 - REORDER OF ELEMENTS FOR A MESSAGE SET, WITHIN A COMPOUND TYPE IC30173 - MQINPUT CATCH TERMINAL DOES NOT COMMIT DATABASE LOCKS. IC30195 - EG ABEND WHEN USING TWO MESSAGES OF THE SAME STRUCTURE WITHIN IC30424 - AFTER APPLIED CSD2, THE MESSAGE BROKER INTERNAL PROBLEM ERROR O IC30497 - ERRORS OCCURRING DURING MQSI GUI CONNECTION TO ORACLE 8.1.6 NEO IC30502 - OUTPUT TREE AFTER PARSING XML MESSAGE IS NOT CORRECT IC30653 - WHEN YOU UNSET A PROMOTED PROPERTY, DEFAULT IS LOST IC30673 - SQL SYNTAX CHECKER REPORTS ERROR ON VALID SYNTAX WHICH DEPLOYS IY14970 - DOCUMENTATION INCORRECT/NEEDS CHANGE ON COMPILERS SUPPORTED BY IY16379 - EXECUTION GROUP TERMINATES ON STARTUP WITH BIP2123 IY16679 - INADEQUATE ERROR MESSAGE PRODUCED FOR EXECUTION GROUP FAILURE IY16970 - DFE STOPS PROCESSING MESSAGES FOR A FLOW. INCOMING MESSAGES BAC IY17486 - COBOL STRUCTURES, CONTAINING SIGNED DECIMAL NUMBERS (PIC S9), IY17561 - RULES NODE NOT PROCESSING A MQS EXPIRY NO PROPAGATE FIELD IN SU IY17772 - AFTER UPGRADE MQSI VERSION F/V1.1 T/V2.0.1, MQSI BROKER HANG IY17780 - DFE NOT STARTING PROCESSING OF MESSAGES ON THE INPUT QUEUES IY17806 - WHEN BROKER HAS LONG CONNECTION TO DATABASE, SOMETIMES THE CONN IY17808 - XML PARSER ADD TRUE TO THE END OF XML DECLARATION. IY18104 - CAST FUNCTION INTERMITTENTLY FAILING IY18146 - IF THE BROKERDB IS ORACLE, ADDITIONAL NLSPATH IS REQUIRED. IY18245 - PERFORMANCE FIX TO ADDRESS INEFFICENCY IN BIT STREAM FOR IY18458 - ERROR PUT TO DLQ BY THROW NODE IS UNREADABLE - 4048 ERROR AND IY19242 - LOCAL_TIMEZONE ESQL IS RETURN 239/241 INSTEAD OF 240 ABOUT 50% IY19382 - DATAFLOWENGINE LOOP IY21179 - DFE COSUMING HIGH CPU AND HANGING WITH NO ERRORS IY22261 - BROKER IN AIX SMP ENVIRONMENT MEMORY MANAGEMENT VULNERABLE TO F 14500 - Over optimization in MTI refresh bitstream method 15071 - Can't put more than 999 bytes of data into an Oracle column 15130 - SIGBUS on SQLExtendedFetch within Compute node 15634 - MQInput catch terminal does not commit database locks 15937 - Error msg from date/time columns in Oracle on Solaris 16516 - PMR: AdminAgent Recovery is compromised 16520 - Cannot insert more than 4000 bytes into Oracle CLOB 16675 - getControlType() missing logNamedExitData 16843 - Whitespace between XML tags is corrupted on AIX 17052 - STRESS: Subscriptions expire immediately during BST 17169 - XML parser: insets TRUE string in parsed block 17763 - CCI_SQL_TRANSACTION_COMMIT ignored 17764 - ImbDecimal needs to support ".xyz" numbers 17994 - XML Parser does not correctly process empty elements 18496 - DFE process seems to be dying after 20216 - Exception thrown creating EG on a migration broker CSD02 (PTF U474405) ___________________ This is the second PTF for IBM MQSeries Integrator Version 2.0.1 for AIX. It is delivered via PTF U474405 for APAR IY15269. It contains fixes for ALL the problems listed below: Name Abstract IY15269 - CUMULATIVE MAINT #02 FOR MQSERIES INTEGRATOR FOR AIX V201 IC27301 - SETTING MQMD.EXPIRY FIELD TO AN ABSOLUTE VALUE IN COMPUTE NODE IC28312 - FLOAT DATA TYPES OF LENGTH 8 ARE NOT HANDLED CORRECTLY WHEN SEN IC28324 - COBOL COPYBOOK IMPORT PROBLEM, MESSAGE BIP1812S RECEIVED. IC28443 - BIP1812S RECEIVED USING THE CONTROL CENTER GENERATE FUNCTION IF IC28446 - INSTALL GUIDE DOES NOT DISCUSS ABOUT MQSI_PARAMETERS_FILE VARIA IC28447 - INSTALL GUIDE PAGE 129/130 HAVE INCORRECT NAMES FOR NT CONSISTE IC28518 - 1. CREATING A BITSTREAM THAT CONTAINS A REPEATING SEGMENT OF IC28520 - LOOP ON COMPUTE NODE - REPEATING ELEMENT USES A REPEAT COUNT IC28605 - MESSAGE FLOW LOOP WITH MSGBIP2608I MSGBIP2623I AND MSGBIP2611I IC28724 - IMPORT OF COBOL COPY BOOK THAT DOES NOT HAVE A COMPLETELY ASCEN IC28810 - SUBSCRIPTIONS WON T SHOW UP FOR A SINGLE USERID IC28926 - SIGNED PACKED DECIMALS WILL ACCEPT F AS WELL AS C AND D IC29022 - BIP1812E CAUSED DURING A DEPLOY IN STRUCTURES WITH MANY EBMEDDE IC29033 - MQSI V201 USING DUPLICATE FLOW FEATURE TO CREATE MESSAGE FLOW IC29184 - XML-PARSE ENVIRONMENT INCORRECT IC29200 - XML MESSAGE GETTING TRUNCATED AFTER PROCESSING THROUGH COMPUTE IY14540 - AIX BROKER CONFIGURATION LIBPATH MODIFICATION MISSING IN DOCUME IY14660 - MEMORY CORRUPTION ON AIX USING DB2 VIA TCP/IP WITH NIS ENABLED IY14720 - MSGBIP2301E WHEN A BROKER TRIES TO LOAD THE MQSI SAMPLE PLUGIN IY15310 - MEMORY LEAK AND THROUGHPUT DEGREDATION IY16620 - MQSI CORE DUMP CAUSED BY ADDRESS ALIGHNMENT ISSUE WHEN BINDING 12057 - Access Violation in MtiImbParser.lil 13319.1 - Node properties dialog change size everytime it opens 13440 - STRESS: Repeated BIP2132 on mixed stress test 13440.1 - ImbPubSubThreads redesign 13590 - ibm-948 missing two chars 13643 - Scrolling and expand tree over than 1 second with 400 elements 13643.1 - CC opening can be slowed due to caches initialisation 13650 - storage leak in compute with CWF format 13767 - Memory leaks and Performance 14043 - Memory leak in WritePackedDecimal 14150 - Leakage XML OUT for tags at Structure Start (Perhaps) 14573 - The Parent name is wrong for CWF error messages 15311 - DB Insert into Oracle 8.1.6 can cause DFE core dump CSD01 (PTF U472858) ___________________ This is the first PTF for IBM MQSeries Integrator Version 2.0.1 for AIX. It is delivered via PTF U472858 for APAR IY12888. It contains fixes for ALL the problems listed below: Name Abstract IY12888 - CUMULATIVE MAINT #01 FOR MQSERIES INTEGRATOR FOR AIX V201 IC27806 - DATA FLOW ENGINE WILL NOT RECOVER FROM ERRORS DURING DELETION IC27959 - DELETING A DATABASE REFERENCE FROM A COMPUTE NODE DOES NOT STO IC28174 - COMPOUND NODE OF A FLOW CONTAINING LABELS CANNOT BE INCLUDED IC28401 - BIP2211E ERROR OCCURRED BY USING BYUSERID IN ORDER MODE OF INP IY12651 - DATA FLOW ENGINE WILL NOT RECOVER FROM ERRORS DURING DELETION IY13621 - MQSI MRM MESSAGE IS CAUSING THE BROKER TO SPIN f8167 - Properties windows always resizes back to default f13255 - Properties windows divider always gets back to default posit'n 9049 - MRMB31 Memory leak associated with datasource keyword. 11318 - Implement ICU 1.6 for enhanced EUC support 12106 - MRMB0408 Boolean tests fail 12191 - mqsistop causes DFE core in ~ostream_withassign (Neon?) 12201 - Messages without inserts get incorrect processing of quotes 12331 - Usage message wrong for mqsireport 12437 - Core dump when ODBC trace active 12507 - Generate fails for Gold Messageset. 12642 - Broker spins when Create ExecutionGroup does not respond 12678 - 1812 Generated when prod. Msg Bk for Gold Message set 12698 - sample directory not removed on uninstall 12772 - Cannot delete Brokers on Uninstall 12789 - Data flow engine will not recover from errors during deletion 12805 - executionGroupTraceOverrideLevel broken 12848 - Apparent memory leak in MTI 12889 - MRMB3503 Dataflowengine abnormally terminated event2160 12917 - NT: DB2: deploy invalid config msg -> broker terminates 12922 - mqsistop usernameserver gives BIP2015 12966 - Scribble IVP fails if no '.' in classpath 12975 - Data base update causes a memory leak on AIX using Oracle 12978 - Problem with sequencing of actions in the Tour 12989 - The CWF property of a string can only be set to a fixed length 12997 - DataFlowEngine locks on deploy with Sybase 13028 - MQRFH2 parser rejects valid RFH2 from AMI 13038 - DataFlowEngine locks on deploy with Sybase 13048 - Memory leak in ImbDecimal class 13121 - cniElementDecimalValue returning unexpected result. 13135 - XML white space on tree copies to NameVal parsers 13137 - cpiCreateContext() called for each message parsed 13149 - Element tree detached unexpectedly in plugin parser 13185 - Pub Sub is never going to work when access control is enabled 13187 - COBOL / C importer name clash (PMR 36770,278,000) 13188 - Reference to removed object in compute node mapping 13221 - Allow threads in a DataFlowEngine to run concurrently by dflt 13261 - Button labels doesn't change but the text indicates they will 13272 - An error message issued when using byUserID. 13300 - ODBCINI must not be set on login accounts 13356 - Valid mapping lines are removed when deleting an input message 13389 - 'pow' function gives SIGSEGV on AIX 13425 - Large columns >2000 bytes corrupted on retrieval ####### ------- end of file MEMO.PTF ------------#######################