|
IMS Sysplex Mgr 130
|
|||||
| APAR | CLOSE DATE |
PTF(s) | Fixing APAR if PE |
HIPER? | Abstract |
|---|---|---|---|---|---|
2023 |
VSAM INFORMATION FOR RECON DATA SET IS NOT DISPLAYED DUE TO GJE2397E | ||||
2021 |
ABENDS0C4 IN MRTRCHKX DURING IMS SHUTDOWN | ||||
2020 |
IMS OPERATION MANAGER GETS ABENDS378-24 FROM GJEOMOP0 | ||||
2020 |
SM CAUSED ABENDS878-0C IN IMS OM | ||||
2020 |
LOOP IN GJEAUDIT | ||||
2020 |
ABENDS0C4 IN GJEIC38X WHEN THRESHOLD PROCESSING HAS BEEN ACTIVATED | ||||
2020 |
ABENDS0C6 IN GJEOMOP0 | ||||
2019 |
DFS2472 INVALID AWE DETECTED AND LOGGED WAS ISSUED IMPROPERLY | ||||
2018 |
SM IMS COMPONENT CAN ABEND WITH U0729 IN DFSSPM00 | ||||
2018 |
ABENDS0C1-01 IN GJEOMOP0 | ||||
2018 |
ABENDS0C4-10 IN GJEIDMTD | ||||
2018 |
SKIP TO NEXT DATA SET IF THE REQUESTED ONE CAN NOT BE OPENED | ||||
2018 |
IBM TOOLS BASE GENERIC LOGGER EXIT LOOP CAUSING IMS CONTROL REGION S0C4 ABEND DURING STARTUP | ||||
2018 |
ABENDS0C4-04 IN GJEIEVTD-CRECMD | ||||
2018 |
RESET USERID FOR ETO INITIATED COMMANDS. SET CORRECT INFO FOR OMEGAMON INITIATED COMMANDS. | ||||
2018 |
BPE0041E UNABLE TO ALLOCATE REQUESTED STORAGE AND ABENDU0006-00000002 | ||||
2018 |
DFSAOEXX AND DFSAOIXX EXITS NOT WORKING PROPERLY AFTER APAR PI80700 | ||||
2017 |
USING PF3 IN SUBPANELS RETURNS TO MAIN PANEL | ||||
2017 |
IN SHARED QUEUES ENVIRONMENT THE ENQ COUNT AND DEQ COUNTS ARE NOT DISPLAYED ISM ISM130 | ||||
2017 |
BLANK OR * FOR NAME ON GJEP94S PANEL RETURNS EMPTY LIST | ||||
2017 |
APARS SUBSEQUENT TO UI45687 DID NOT PROVIDE IMS V15 SUPPORT. THIS APAR WILL FORWARD-FIT THOSE FIXES FOR IMS V15. | ||||
2017 |
GJEAUDIT UTILITY ENHANCEMENT TO READ ONLY THE NECESSARY HISTORY VSAM FILES | ||||
2017 |
TIME VALUE CHANGES IN PANEL GJEPS00 WHEN THE ENTER KEY IS PRESSED | ||||
2017 |
GJE0999E - IMS SM UI XCF USER MESSAGE EXIT ABEND S0C4 | ||||
2017 |
ABENDS0C1 IN OM ADDRESS SPACE, BPE0019E OM OUTPUT USER EXIT MODULE GJEOMOP0 ABEND S0C1 | ||||
2017 |
DFS1269E SEVERE IMS INTERNAL FAILURE, REASON CODE=4557 OR ABENDS878 | ||||
2017 |
GJE2001E IMS SYSPLEX MANAGER INITIALIZATION FAILED DFS629I IMS CTX TCB ABEND - IMS 4015 IN GJEIIPMD | ||||
2017 |
RECURSIVE ABEND 0C4 S0C4 WHEN BUFFER OVERFLOW PROTECTION IS ACTIVATED | ||||
2017 |
SYSPLEX MANAGER AUDIT LOG ENHANCEMENT - ADD OTMA USERID | ||||
2017 |
SOME PRIMARY MESSAGES DO NOT SHOW ON VIEW MESSAGE'S PREFIXES AND CONTENT REQUEST | ||||
2017 |
IMS COMMAND AUDITING ENHANCEMENT | ||||
2017 |
SYSPLEX MANAGER INTERFERES WITH THE AOE EXIT FROM SYSTEM AUTOMATION AT IMS STARTUP | ||||
2017 |
SYSPLEX MANAGER PRE-CONDITIONING FOR IMS COMPATABILITY | ||||
2016 |
SYPLEX MANAGER RECEIVES ABEND S0C4 WHILE PROCESSING A DESTINATION QUEUE DEPTH REQUEST FOR OTMA QUEUE | ||||
2015 |
ABEND0C4 RC04 GJEIC30D CSECT C30X3000 | ||||
2015 |
SM LOOPS WHEN DRILLING DOWN TO TRANSACTIONS DETAILS FROM AFFINITY DESTINATIONS PANEL | ||||
2015 |
DISPLAY OF UNRESOLVED UOWES SHOULD BE CONSOLIDATED BY DESTINATION | ||||
2015 |
TUTORIAL FOR SCREEN GJEP301 "DEPENDANT REGIONS HOLDING LOCKS" ONLY EXPLAINS LOCK TYPE OF EITHER P OR L | ||||
2014 |
SYSPLEX MANAGER RUN-UNDER SUPPORT | ||||
2014 |
ABEND0C4 GJEIC22D | ||||
2014 |
SYSPLEX MANAGER SCI EVENT EXIT ABENDSC78 DUE TO TOO MANY REGISTER AND DEREGISTER EVENTS FROM AOP PROGRAMS | ||||
2014 |
Description not available. Security/Integrity exposure | ||||
2014 |
SYSPLEX MANAGER ENHANCEMENTS | ||||
2014 |
NO PARAMETER FOR LOGSTREAM DUPLEXMODE(DRXRC) | ||||
2014 |
ABEND0C4 GJEDC59C +X'28E' R6 STORAGE NOT AVAILABLE | ||||
2014 |
ABEND0C4 GJEUIAGG +X'EFC' | ||||
2014 |
IMS SYSPLEX MANAGER OM OUTPUT EXIT ABENDS0C4 AND/OR ABENDS878 AFTER TYPE-2 COMMANDS ARE ENTERED | ||||
2014 |
ABEND0C1 IN GJEIXMGD | ||||
2013 |
BPE ABENDU3400 RC05 FOR SAMPLIB MEMBER GJEEXIT0 | ||||
2013 |
MSGGJE0430E AND MSGGJE0991E ISSUED AT IMS SYSPLEX MANAGER DATA COLLECTOR SHUTDOWN | ||||
2013 |
ABEND0C4 GJEULLK0 - SMUI TLLK TCB MODULE=LLKSND24 | ||||
2013 |
ABEND0C4 GJEIRDP0 ROUTINE READMBR WHEN AFFINITY DEFINITION MEMBER IS LARGE | ||||
2013 |
ABEND0C4 GJEILBWC | ||||
2013 |
Description not available. Security/Integrity exposure | ||||
2013 |
DATA COLLECTOR ABEND0C4 IN CSLRREG0 WHEN REGISTERING TO CSL. INCORROUT WHEN DISPLAYING IMS PROGRAMS DUE TO ACBGEN CHANGE. | ||||
2012 |
ADD SUPPORT FOR IMS V13 | ||||
2012 |
IMS SYSPLEX MANAGER UI ABENDC78 | ||||
2012 |
ABEND0C4 GJEIEVTC+PROCMTO AFTER STOPPING IMS | ||||
2012 |
ALLOW SAME STC / JOBNAME FOR SYSPLEX MANAGER DATA COLLECTORS WITHIN THE SAME IMSPLEX | ||||
2012 |
ABEND0C4 IN GJEULLK0 +X'10AA' DUE TO BAD R13 | ||||
2012 |
GJEICLCC + CRERESP AFTER THE REINIT COMMAND | ||||
2012 |
IMS ABENDS FRAGMENTED STORAGE WHEN SYSPLEX MANAGER ACTIVE | ||||
2012 |
SYSPLEX MANAGER CALLED IRLM FOR STATS AND THE ECB IS INVALID | ||||
2012 |
IMS SYSPLEX MANAGER COMPONENT LIST (PANEL GJEP600) DISPLAYS THE IRLM VERSION AS 2.2.00 IT SHOULD BE 2.2.30 | ||||
2012 |
CQS CQSBROWS SERVICE FAILURE RC=00000004, RSN=00000128, SUB=00000000, STRUC= IMSAMSGQ | ||||
2012 |
EXIT DFSAOUE0 NOT DRIVEN WHEN SYSPLEX MANAGER IS INSTALLED | ||||
2012 |
MAINTENANCE THAT REQS PTF UK49276 WILL NOT APPLY BECAUSE H32A130IS NOT INSTALLED | ||||
2011 |
GJEMSCEX AND/OR DFSMRTR0 FOLLOWED BY MSGGEX2930E EXIT GJEMSCE0 TERMINATED DUE TO ERROR | ||||
2011 |
GJEIC52X AT ENTRY BLDID052 OFFSET X'0140' BECAUSE DDIRADDR=0 | ||||
2011 |
IMS AFTER AN IRLM STAT CALL IMSSM OPTION 8 THEN OPTION 1 | ||||
2010 |
PROVIDE RUNUNDER SUPPORT FOR IMS V12 | ||||
2010 |
IMS SYSPLEX MANAGER ISPF ENHANCEMENTS | ||||
2009 |
DURING COMMAND 'F DCJOB,REINIT SM' AFTER APPLYING UK45873 | ||||
2009 |
PROVIDE SHARED QUEUE LOCAL BUFFER OVERFLOW PROTECTION | ||||
2009 |
PROVIDE DYNAMIC AFFINITY UPDATE SUPPORT | ||||
2009 |
SM IMS DEPENDENT MODULES ARE ASSEMBLED INCORRECTLY | ||||
2009 |
MISSING RM RESOURCES ( SERIAL PROGRAMS, DATABASE...) UNDER IMS V11 | ||||
2009 |
IMS V11 RUNUNDER SUPPORT FOR IMS SYSPLEX MANAGER | ||||
2008 |
MAINTAIN THE LAST DATE/TIME THAT HAS BEEN USED BY CLIENT TO VIEWEXCEPTION DATA | ||||
2008 |
IMSSM SERVER MODULE GJEULLK0 | ||||
2008 |
FIX VARIOUS PROBLEMS FOUND DURING BETA | ||||