Synchronizing data on a Symbian OS V6.0 device

Complete the following steps to verify that the DB2 Everyplace Sync Server is running

This task is part of the main task of Setting up and configuring a Symbian OS V6.0 mobile device for synchronization. After you complete these steps, return to Setting up and configuring a Symbian OS V6.0 mobile device for synchronization.

Procedure

  1. Follow the directions in Configuring m-Router Connect on a workstation to navigate to the General page of the COM port properties window.
  2. On the Symbian OS V6.0 device, press Extras, select m-Router Connect and press Open. The m-Router Connect window opens.
  3. Press Connect. m-Router attempts to establish a connection with the workstation.
  4. With m-Router Connect still running, press Extras, select ISync and press OK. The ISync screen opens.
  5. Press Sync.
  6. In the COM port properties window on your workstation, go to the Mode list and select serial port again to start the communication between the device and the workstation. When communication between the device and workstation is established, the message "connected" appears in the COM port properties window. The synchronization begins.
  7. After the synchronization ends, press the Menu button on the device, highlight Close on the File menu, and press Select to exit ISync.
  8. Press Extras on the keyboard.
  9. Select m-Router Connect from the list and press the open button to switch to the application.
  10. Press Disconnect, then press Exit to exit m-Router Connect..

You successfully synchronized data between your mobile device and DB2 Everyplace Sync Server.

Related tasks