The fix is shipped as file IBM.HHOP801.UK90246
The fix has rework (build) date 2012347 (12 Dec 2012)
The following fixes are prerequisites for this fix:
These prerequisites can be downloaded from the Developer for System z Recommended Fixes page, if not included as file IBM.HHOP801.<prereq>.
Steps required to install the fix:
A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//ALLOC EXEC PGM=IEFBR14 //* //UK90246 DD DSN=hlq.IBM.HHOP801.UK90246, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(227,40)) //*
Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:
| User enters: | Values |
|---|---|
| mvsaddr | TC P/IP address of the z/OS system |
| tsouid | Your TSO user ID |
| tsopw | Your TSO password |
| d: | Your drive containing the fix files |
| hlq | High-level qualifier that you used for the data set that you allocated in the job above |
C:\>ftp mvsaddr Connected to mvsaddr. 220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%. 220 Connection will close if idle for more than 60 minutes. User (mvsaddr:(none)): tsouid 331 Send password please. Password: tsopw 230 tsouid is logged on. Working directory is "tsouid.". ftp> cd .. 250 "" is the working directory name prefix. ftp> cd hlq 250 "hlq." is the working directory name prefix. ftp> binary 200 Representation type is Image ftp> put d:\IBM.HHOP801.UK90246 200 Port request OK. 125 Storing data set hlq.IBM.HHOP801.UK90246 250 Transfer completed successfully 12651120 bytes sent in 0.28 seconds ftp> quit 221 Quit command received. Goodbye.
++ HOLD(UK90246) SYS FMID(HHOP801) REASON(ACTION) DATE(12347)
COMMENT
(****************************************************************
* Affected function: JMON operator commands *
****************************************************************
* Description: new JMON operator command *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: n/a *
****************************************************************
This service introduces a new operator command for the JMON
started task.
MODIFY JMON,APPL=USERS
Displays console message
BPXM023I (STCJMON) JMON user list written to SYSOUT
and writes the list of active users in DD SYSOUT.
MODIFY JMON,APPL=-M{N | E | W | I | V}
Displays console message
BPXM023I (STCJMON) JMON MESSAGE LEVEL:...
and set the detail level of JMON messages to
N(one)
E(rror)
W(arning)
I(nformational) [default]
V(erbose)
JMON messages are written to DD SYSPRINT.
MODIFY JMON,APPL=-T{N | E | I | V}
Displays console message
BPXM023I (STCJMON) JMON TRACE LEVEL:...
and set the detail level of JMON trace data to
N(one)
E(rror) [default]
I(nformational)
V(erbose)
JMON trace data is written to DD SYSOUT.
Note that detailed tracing will cause performance degradation
and should only be done under the direction of the IBM support
center.
****************************************************************
* Affected function: CARMA *
****************************************************************
* Description: CA Endevor(R) SCM VSAM update *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: SFEKVSM2(CRA0VCAD) *
* Part: SFEKVSM2(CRA0VCAS) *
****************************************************************
This maintenance updates the CRADEF and CRASTRS VSAM data sets
used by the Developer for System z interface to CA Endevor(R).
To apply these changes to your active VSAM data sets, resubmit
the customized SFEKSAMP(CRA$VCAD) and SFEKSAMP(CRA$VCAS).
****************************************************************
* Affected function: configuration problem analysis *
****************************************************************
* Description: updated debug information gathering tool *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKLOGS) *
****************************************************************
This maintenance updates the debug information gathering tool,
FEKLOGS.
- added DD REFORMAT to present refomatted logs
If you have customized this file, it is advised to back it
up before proceeding with SMP/E Apply.
****************************************************************
* Affected function: configuration problem analysis *
****************************************************************
* Description: updated debug information gathering tool *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKLOGS) *
* [FEK.#CUST.JCL(FEKLOGS)] *
****************************************************************
This fix updated sample member SFEKSAMP(FEKLOGS).
Redo your customizations, if any, after applying this
maintenance.
****************************************************************
* Affected function: CA Endevor SCM(R) interface *
****************************************************************
* Description: updated CA Endevor support *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: FEK.#CUST.JCL(CRA$VDEF) *
* [FEK.SFEKSAMP(CRA$VDEF)] *
* Part: FEK.#CUST.JCL(CRA$VCAD) *
* [FEK.SFEKSAMP(CRA$VCAD)] *
****************************************************************
This fix updates sample members SFEKSAMP(CRA$VCAD CRA$VDEF):
* add support to disable a RAM
If you have customized this file, it is advised to back it
up before proceeding with SMP/E Apply.
****************************************************************
* Affected function: CA Endevor SCM(R) interface *
****************************************************************
* Description: updated CA Endevor support *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.#CUST.JCL(CRA$VDEF) *
* [FEK.SFEKSAMP(CRA$VDEF)] *
* Part: FEK.#CUST.JCL(CRA$VCAD) *
* [FEK.SFEKSAMP(CRA$VCAD)] *
****************************************************************
This fix updated sample members SFEKSAMP(CRA$VCAD CRA$VDEF).
Redo your customizations, if any, after applying this
maintenance.
****************************************************************
* Affected function: RSE *
****************************************************************
* Description: updated environment variable *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: /usr/lpp/rdz/samples/rsed.envvars *
* [/etc/rdz/rsed.envvars] *
****************************************************************
This fix updates the sample rsed.envvars by altering the
following non-customizable directive:
_RSE_JAVAOPTS="$_RSE_JAVAOPTS -DDSTORE_SPIRIT_ON=false"
(previous value was true)
Note that even if you don't update the variable in
rsed.envvars, RSE will treat it as being false.
Update this directive in your active rsed.envvars (by default
located in /etc/rdz) if you want to use it.
****************************************************************
* Affected function: RSE *
****************************************************************
* Description: new environment variable *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: /usr/lpp/rdz/samples/rsed.envvars *
* [/etc/rdz/rsed.envvars] *
****************************************************************
This fix updated sample file rsed.envvars.
Redo your customizations, if any, after applying this
maintenance.
****************************************************************
* Affected function: RSE *
****************************************************************
* Description: EAV support *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: n/a *
****************************************************************
This fix adds EAV (Extended Address Volume) support to RSE.
Also, after applying this fix, v851 and higher clients can
specifiy EATTR(NO|OPT) for EAV dataset allocation.).
SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required.
SMP/E RECEIVE and APPLY the fix.