Installation instructions for fix UI44168 for IBM Rational Developer for System z Host Utilities v91 (FMID HAKG910)

The fix is shipped as file IBM.HAKG910.UI44168

The fix has rework (build) date 2017025 (25 Jan 2017)

The following fixes are prerequisites for this fix:

• None

The following fixes are corequisites for this fix:

• (UI44168)
• UI44169
• UI44170
• UI44171

These requisites can be downloaded from the Developer for z Systems Recommended Fixes page, if not included as file IBM.HAKG910.<req>.

Overview of the installation steps

Steps required to install the fix:

1. Allocate host data sets for the fix.
2. Upload the fix from your workstation to z/OS.
3. SMP/E hold information for the fix.
4. Perform SMP/E ACCEPT for the prerequisites.
5. Perform SMP/E RECEIVE and APPLY for the fix.
6. Restart started tasks to activate changes.

Allocate host data sets for the fix

A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//ALLOC    EXEC PGM=IEFBR14
//*
//UI44168    DD DSN=hlq.IBM.HAKG910.UI44168,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(3847,760))
//*
//UI44169    DD DSN=hlq.IBM.HAKG910.UI44169,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(5044,1000))
//*
//UI44170    DD DSN=hlq.IBM.HAKG910.UI44170,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(3813,760))
//*
//UI44171    DD DSN=hlq.IBM.HAKG910.UI44171,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(8,5))
//*

Upload the fix from your workstation to z/OS

Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:

C:\>ftp mvsaddr
Connected to mvsaddr.
220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%.
220 Connection will close if idle for more than 60 minutes.
 
User (mvsaddr:(none)): tsouid
331 Send password please.
 
Password: tsopw
230 tsouid is logged on.  Working directory is "tsouid.".
 
ftp> cd ..
250 "" is the working directory name prefix.
 
ftp> cd hlq
250 "hlq." is the working directory name prefix.
 
ftp> binary
200 Representation type is Image
 
ftp> put d:\IBM.HAKG910.UI44168
200 Port request OK.
125 Storing data set hlq.IBM.HAKG910.UI44168
250 Transfer completed successfully
214762320 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG910.UI44169
200 Port request OK.
125 Storing data set hlq.IBM.HAKG910.UI44169
250 Transfer completed successfully
281601200 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG910.UI44170
200 Port request OK.
125 Storing data set hlq.IBM.HAKG910.UI44170
250 Transfer completed successfully
212907600 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG910.UI44171
200 Port request OK.
125 Storing data set hlq.IBM.HAKG910.UI44171
250 Transfer completed successfully
425120 bytes sent in 0.28 seconds
 
ftp> quit
221 Quit command received. Goodbye.

SMP/E hold information for the fix

none
  

Perform SMP/E ACCEPT for the prerequisites

SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required. Note that once accepted, you cannot backout the accepted prerequisites.

This step can be skipped if there are no prerequisites, or if there is a reason to not make a prerequisite permanent.

You can accept the prerequisites by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//*
//* Change #globalcsi to the data set name of your global CSI.
//* Change #dzone to your CSI distribution zone name.
//*
//ACCEPT   EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPCNTL  DD *
   SET BOUNDARY(#dzone) .
   ACCEPT SELECT(
   ) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*

Perform SMP/E RECEIVE and APPLY for the fix

SMP/E RECEIVE and APPLY the fix.

You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//*
//* Change hlq to the high level qualifier used to upload the fix.
//* Change (2x) #globalcsi to the data set name of your global CSI.
//* Change #tzone to your CSI target zone name.
//*
//RECEIVE  EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPPTFIN DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI44168
//         DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI44169
//         DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI44170
//         DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI44171
//SMPCNTL  DD *
   SET BOUNDARY(GLOBAL) .
   RECEIVE SELECT(
     UI44168
     UI44169
     UI44170
     UI44171
   ) SYSMODS LIST .
//*
//APPLY    EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPCNTL  DD *
   SET BOUNDARY(#tzone) .
   APPLY SELECT(
     UI44168
     UI44169
     UI44170
     UI44171
   ) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*

Restart started tasks to activate changes

Restart started tasks to activate changes.