Installation instructions for fix UI41937 for IBM Rational Developer for z Systems Host Utilities v95 (FMID HAKG951)

The fix is shipped as file IBM.HAKG951.UI41937

The fix has rework (build) date 2016298 (24 Oct 2016)

The following fixes are prerequisites for this fix:

• None

The following fixes are corequisites for this fix:

• UI41938
• UI41939
• UI41940

These requisites can be downloaded from the Developer for z Systems Recommended Fixes page, if not included as file IBM.HAKG951.<req>.

Overview of the installation steps

Steps required to install the fix:

1. Allocate host data sets for the fix.
2. Upload the fix from your workstation to z/OS.
3. SMP/E hold information for the fix.
4. Perform SMP/E ACCEPT for the prerequisites.
5. Perform SMP/E RECEIVE and APPLY for the fix.
6. Restart started tasks to activate changes.

Allocate host data sets for the fix

A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//ALLOC    EXEC PGM=IEFBR14
//*
//UI41937    DD DSN=hlq.IBM.HAKG951.UI41937,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(4136,820))
//*
//UI41938    DD DSN=hlq.IBM.HAKG951.UI41938,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(4151,830))
//*
//UI41939    DD DSN=hlq.IBM.HAKG951.UI41939,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(4209,840))
//*
//UI41940    DD DSN=hlq.IBM.HAKG951.UI41940,
//            DISP=(NEW,CATLG,DELETE),
//            DSORG=PS,
//            RECFM=FB,
//            LRECL=80,
//            UNIT=SYSALLDA,
//*            VOL=SER=volser,
//*            BLKSIZE=6160,
//            SPACE=(TRK,(664,130))
//*

Upload the fix from your workstation to z/OS

Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:

C:\>ftp mvsaddr
Connected to mvsaddr.
220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%.
220 Connection will close if idle for more than 60 minutes.
 
User (mvsaddr:(none)): tsouid
331 Send password please.
 
Password: tsopw
230 tsouid is logged on.  Working directory is "tsouid.".
 
ftp> cd ..
250 "" is the working directory name prefix.
 
ftp> cd hlq
250 "hlq." is the working directory name prefix.
 
ftp> binary
200 Representation type is Image
 
ftp> put d:\IBM.HAKG951.UI41937
200 Port request OK.
125 Storing data set hlq.IBM.HAKG951.UI41937
250 Transfer completed successfully
230920160 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG951.UI41938
200 Port request OK.
125 Storing data set hlq.IBM.HAKG951.UI41938
250 Transfer completed successfully
231743680 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG951.UI41939
200 Port request OK.
125 Storing data set hlq.IBM.HAKG951.UI41939
250 Transfer completed successfully
235021760 bytes sent in 0.28 seconds
 
ftp> put d:\IBM.HAKG951.UI41940
200 Port request OK.
125 Storing data set hlq.IBM.HAKG951.UI41940
250 Transfer completed successfully
37047120 bytes sent in 0.28 seconds
 
ftp> quit
221 Quit command received. Goodbye.

SMP/E hold information for the fix

none
  

Perform SMP/E ACCEPT for the prerequisites

SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required. Note that once accepted, you cannot backout the accepted prerequisites.

This step can be skipped if there are no prerequisites, or if there is a reason to not make a prerequisite permanent.

You can accept the prerequisites by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//*
//* Change #globalcsi to the data set name of your global CSI.
//* Change #dzone to your CSI distribution zone name.
//*
//ACCEPT   EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPCNTL  DD *
   SET BOUNDARY(#dzone) .
   ACCEPT SELECT(
   ) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*

Perform SMP/E RECEIVE and APPLY for the fix

SMP/E RECEIVE and APPLY the fix.

You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.

//*
//* Change hlq to the high level qualifier used to upload the fix.
//* Change (2x) #globalcsi to the data set name of your global CSI.
//* Change #tzone to your CSI target zone name.
//*
//RECEIVE  EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPPTFIN DD DISP=SHR,DSN=hlq.IBM.HAKG951.UI41937
//         DD DISP=SHR,DSN=hlq.IBM.HAKG951.UI41938
//         DD DISP=SHR,DSN=hlq.IBM.HAKG951.UI41939
//         DD DISP=SHR,DSN=hlq.IBM.HAKG951.UI41940
//SMPCNTL  DD *
   SET BOUNDARY(GLOBAL) .
   RECEIVE SELECT(
     UI41937
     UI41938
     UI41939
     UI41940
   ) SYSMODS LIST .
//*
//APPLY    EXEC PGM=GIMSMP,REGION=0M
//SMPCSI   DD DISP=OLD,DSN=#globalcsi
//SMPCNTL  DD *
   SET BOUNDARY(#tzone) .
   APPLY SELECT(
     UI41937
     UI41938
     UI41939
     UI41940
   ) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*

Restart started tasks to activate changes

Restart started tasks to activate changes.