The fix is shipped as file IBM.HAKG910.UI41257
The fix is shipped as file IBM.HAKG910.UI41258
The fix is shipped as file IBM.HAKG910.UI41259
The fix is shipped as file IBM.HAKG910.UI41260
The fix has rework (build) date 2016273 (29 Sep 2016)
The following fixes are prerequisites for this fix:
The following fixes are corequisites for this fix:
These requisites can be downloaded from the Developer for z Systems Recommended Fixes page, if not included as file IBM.HAKG910.<req>.
Steps required to install the fix:
A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//ALLOC EXEC PGM=IEFBR14 //* //UI41257 DD DSN=hlq.IBM.HAKG910.UI41257, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(696,130)) //* //UI41258 DD DSN=hlq.IBM.HAKG910.UI41258, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(3847,760)) //* //UI41259 DD DSN=hlq.IBM.HAKG910.UI41259, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(5043,1000)) //* //UI41260 DD DSN=hlq.IBM.HAKG910.UI41260, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(3804,760)) //*
Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:
| User enters: | Values |
|---|---|
| mvsaddr | TC P/IP address of the z/OS system |
| tsouid | Your TSO user ID |
| tsopw | Your TSO password |
| d: | Your drive containing the fix files |
| hlq | High-level qualifier that you used for the data set that you allocated in the job above |
C:\>ftp mvsaddr Connected to mvsaddr. 220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%. 220 Connection will close if idle for more than 60 minutes. User (mvsaddr:(none)): tsouid 331 Send password please. Password: tsopw 230 tsouid is logged on. Working directory is "tsouid.". ftp> cd .. 250 "" is the working directory name prefix. ftp> cd hlq 250 "hlq." is the working directory name prefix. ftp> binary 200 Representation type is Image ftp> put d:\IBM.HAKG910.UI41257 200 Port request OK. 125 Storing data set hlq.IBM.HAKG910.UI41257 250 Transfer completed successfully 38852240 bytes sent in 0.28 seconds ftp> put d:\IBM.HAKG910.UI41258 200 Port request OK. 125 Storing data set hlq.IBM.HAKG910.UI41258 250 Transfer completed successfully 214761520 bytes sent in 0.28 seconds ftp> put d:\IBM.HAKG910.UI41259 200 Port request OK. 125 Storing data set hlq.IBM.HAKG910.UI41259 250 Transfer completed successfully 281568080 bytes sent in 0.28 seconds ftp> put d:\IBM.HAKG910.UI41260 200 Port request OK. 125 Storing data set hlq.IBM.HAKG910.UI41260 250 Transfer completed successfully 212377680 bytes sent in 0.28 seconds ftp> quit 221 Quit command received. Goodbye.
++HOLD(UI41257) SYS FMID(HAKG910) REASON(ACTION) DATE(16273)
COMMENT
(****************************************************************
* Affected function: RSE daemon *
****************************************************************
* Description: PARMLIB(IFAPRDxx) update *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: sys1.parmlib(IFAPRDxx) *
****************************************************************
After applying this fix, Rational Developer for System z host
Utilities (Code Coverage and Code Review) will register with
z/OS during startup. If registration fails, for example because
RDzUtil coponents are disabled in SYS1.PARMLIB(IFAPRDxx),
startup of the RDzUtil components will fail also.
If you purchased Developer for System z Host Utilities as part
of product code 5697-CDT, IBM Enterprise COBOL Suite for z/OS,
V1.1 (or later), and have not already done so for another
program in product code 5697-CDT, include an entry in the
IFAPRDxx parmlib member to enable the related programs.
Define PROD=xx in the IEASYSxx parmlib member to specify which
IFAPRDxx parmlib member should be used during IPL.
Specify the following in IFAPRDxx to define Enterprise COBOL
Suite for z/OS (product code 5697-CDT):
PRODUCT OWNER('IBM CORP')
NAME('IBM COBOL SUITE')
ID(5697-CDT)
VERSION(*) RELEASE(*) MOD(*)
FEATURENAME(*)
STATE(ENABLED)
Alternatively and optionally, if you purchased Developer for
System z Host Utilities separately (NOT part of Enterprise COBOL
Suite for z/OS), you may include an entry in the IFAPRDxx
parmlib member for Developer for System z Host Utilities using
the stand-alone product code, 5724-T07:
PRODUCT OWNER('IBM CORP')
NAME('IBM RDZ UTIL')
ID(5724-T07)
VERSION(*) RELEASE(*) MOD(*)
FEATURENAME(*)
STATE(ENABLED)
After the IFAPRDxx parmlib member is updated, it can be
activated dynamically (until the next IPL) with the following
console command:
SET PROD=xx).
SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required. Note that once accepted, you cannot backout the accepted prerequisites.
This step can be skipped if there are no prerequisites, or if there is a reason to not make a prerequisite permanent.
You can accept the prerequisites by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//* //* Change #globalcsi to the data set name of your global CSI. //* Change #dzone to your CSI distribution zone name. //* //ACCEPT EXEC PGM=GIMSMP,REGION=0M //SMPCSI DD DISP=OLD,DSN=#globalcsi //SMPCNTL DD * SET BOUNDARY(#dzone) . ACCEPT SELECT( ) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR). //*
SMP/E RECEIVE and APPLY the fix.
You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//*
//* Change hlq to the high level qualifier used to upload the fix.
//* Change (2x) #globalcsi to the data set name of your global CSI.
//* Change #tzone to your CSI target zone name.
//*
//RECEIVE EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPPTFIN DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI41257
// DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI41258
// DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI41259
// DD DISP=SHR,DSN=hlq.IBM.HAKG910.UI41260
//SMPCNTL DD *
SET BOUNDARY(GLOBAL) .
RECEIVE SELECT(
UI41257
UI41258
UI41259
UI41260
) SYSMODS LIST .
//*
//APPLY EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPCNTL DD *
SET BOUNDARY(#tzone) .
APPLY SELECT(
UI41257
UI41258
UI41259
UI41260
) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*