The fix is shipped as file IBM.HHOP850.UI40857
The fix has rework (build) date 2016265 (21 Sep 2016)
The following fixes are prerequisites for this fix:
The following fixes are corequisites for this fix:
These requisites can be downloaded from the Developer for z Systems Recommended Fixes page, if not included as file IBM.HHOP850.<req>.
Steps required to install the fix:
A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//ALLOC EXEC PGM=IEFBR14 //* //UI40857 DD DSN=hlq.IBM.HHOP850.UI40857, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(75,10)) //*
Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:
| User enters: | Values |
|---|---|
| mvsaddr | TC P/IP address of the z/OS system |
| tsouid | Your TSO user ID |
| tsopw | Your TSO password |
| d: | Your drive containing the fix files |
| hlq | High-level qualifier that you used for the data set that you allocated in the job above |
C:\>ftp mvsaddr Connected to mvsaddr. 220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%. 220 Connection will close if idle for more than 60 minutes. User (mvsaddr:(none)): tsouid 331 Send password please. Password: tsopw 230 tsouid is logged on. Working directory is "tsouid.". ftp> cd .. 250 "" is the working directory name prefix. ftp> cd hlq 250 "hlq." is the working directory name prefix. ftp> binary 200 Representation type is Image ftp> put d:\IBM.HHOP850.UI40857 200 Port request OK. 125 Storing data set hlq.IBM.HHOP850.UI40857 250 Transfer completed successfully 4179840 bytes sent in 0.28 seconds ftp> quit 221 Quit command received. Goodbye.
++HOLD(UI40857) SYS FMID(HHOP850) REASON(ACTION) DATE(16265)
COMMENT
(****************************************************************
* Affected function: work files *
****************************************************************
* Description: add sticky bit to shared directory *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKSETUP) *
* [FEK.#CUST.JCL(FEKSETUP)] *
****************************************************************
This maintenance adds the sticky bit (+t) to the shared work
directories.
It is advised for existing setups to repeat this action manually
chmod +t /var/rdz/WORKAREA
chmod +t /var/rdz/logs
****************************************************************
* Affected function: work files *
****************************************************************
* Description: add sticky bit to shared directory *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.SFEKSAMP(FEKSETUP) *
* [FEK.#CUST.JCL(FEKSETUP)] *
****************************************************************
This maintenance adds the sticky bit (+t) to the shared work
directories.
It is advised for existing setups to repeat this action manually
chmod +t /var/rdz/WORKAREA
chmod +t /var/rdz/logs
****************************************************************
* Affected function: RSE *
****************************************************************
* Description: new environment variables *
****************************************************************
* Timing: pre-APPLY *
****************************************************************
* Part: /usr/lpp/rdz/samples/rsed.envvars *
* [/etc/rdz/rsed.envvars] *
****************************************************************
This fix updates the sample rsed.envvars by adding the
following optional directives:
#GSK_FIPS_STATE=OFF
Specifies whether the FIPS 140-2 standard for encrypted
communication is used. The default is OFF. Uncomment and
specify ON to use encrypted communication that conforms to
the FIPS 140-2 standard.
This fix updates the sample rsed.envvars by changing the
following sample directive:
_RSE_HOST_CODEPAGE=Cp1047
This fix updates the sample rsed.envvars by making the
following directives not customizable:
_RSE_HOST_CODEPAGE=Cp1047
The _RSE_HOST_CODEPAGE directive is used for internal server
processing, and the Cp1047 value is required for Java J8.0
support.
****************************************************************
* Affected function: RSE *
****************************************************************
* Description: new environment variables *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: /usr/lpp/rdz/samples/rsed.envvars *
* [/etc/rdz/rsed.envvars] *
****************************************************************
This fix updated sample file rsed.envvars.
Redo your customizations, if any, after applying this
maintenance.
****************************************************************
* Affected function: console messages *
****************************************************************
* Description: new message, FEJ211I *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: n/a *
****************************************************************
This maintenance introduces a new console message for JES
Job Monitor, where %0 is replaced with the JES Job Monitor port
number:
FEJ211I Server ready to accept connections on port %0).
SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required. Note that once accepted, you cannot backout the accepted prerequisites.
This step can be skipped if there are no prerequisites, or if there is a reason to not make a prerequisite permanent.
You can accept the prerequisites by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//*
//* Change #globalcsi to the data set name of your global CSI.
//* Change #dzone to your CSI distribution zone name.
//*
//ACCEPT EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPCNTL DD *
SET BOUNDARY(#dzone) .
ACCEPT SELECT(
UI18898
UI24911
UK83670
UK92638
UK98515
) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*
SMP/E RECEIVE and APPLY the fix.
You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//*
//* Change hlq to the high level qualifier used to upload the fix.
//* Change (2x) #globalcsi to the data set name of your global CSI.
//* Change #tzone to your CSI target zone name.
//*
//RECEIVE EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPPTFIN DD DISP=SHR,DSN=hlq.IBM.HHOP850.UI40857
//SMPCNTL DD *
SET BOUNDARY(GLOBAL) .
RECEIVE SELECT(
UI40857
) SYSMODS LIST .
//*
//APPLY EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPCNTL DD *
SET BOUNDARY(#tzone) .
APPLY SELECT(
UI40857
) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*
Restart started tasks to activate changes.