The fix is shipped as file IBM.HHOP910.UI37833
The fix has rework (build) date 2016134 (13 May 2016)
The following fixes are prerequisites for this fix:
These prerequisites can be downloaded from the Developer for z Systems Recommended Fixes page, if not included as file IBM.HHOP910.<prereq>.
Steps required to install the fix:
A sequential data set must be allocated on the z/OS system to receive the fix that you will upload from your workstation. You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//ALLOC EXEC PGM=IEFBR14 //* //UI37833 DD DSN=hlq.IBM.HHOP910.UI37833, // DISP=(NEW,CATLG,DELETE), // DSORG=PS, // RECFM=FB, // LRECL=80, // UNIT=SYSALLDA, //* VOL=SER=volser, //* BLKSIZE=6160, // SPACE=(TRK,(41,5)) //*
Upload the file in binary format from your workstation to the z/OS data set. On a Windows system, you can use FTP from a command prompt to upload the file. In the sample dialog shown below, commands or other information entered by the user are in bold, and the following values are assumed:
| User enters: | Values |
|---|---|
| mvsaddr | TC P/IP address of the z/OS system |
| tsouid | Your TSO user ID |
| tsopw | Your TSO password |
| d: | Your drive containing the fix files |
| hlq | High-level qualifier that you used for the data set that you allocated in the job above |
C:\>ftp mvsaddr Connected to mvsaddr. 220-FTPD1 IBM FTP CS %version% at mvsaddr, %time% on %date%. 220 Connection will close if idle for more than 60 minutes. User (mvsaddr:(none)): tsouid 331 Send password please. Password: tsopw 230 tsouid is logged on. Working directory is "tsouid.". ftp> cd .. 250 "" is the working directory name prefix. ftp> cd hlq 250 "hlq." is the working directory name prefix. ftp> binary 200 Representation type is Image ftp> put d:\IBM.HHOP910.UI37833 200 Port request OK. 125 Storing data set hlq.IBM.HHOP910.UI37833 250 Transfer completed successfully 2256640 bytes sent in 0.28 seconds ftp> quit 221 Quit command received. Goodbye.
++HOLD(UI37833) SYS FMID(HHOP910) REASON(ACTION) DATE(16134)
COMMENT
(****************************************************************
* Affected function: CA Endevor SCM(R) interface *
****************************************************************
* Description: new option *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.#CUST.PARMLIB(CRACFG) *
* [FEK.SFEKSAMP(CRACFG)] *
****************************************************************
This fix updates configuration file CRACFG, which is used by
Edit support for CA Endevor(R) SCM.
# DYNAMIC-FB-DATASET-ALLOC
Uncomment and specify YES if some of the CA Endevor(R) SCM
TYPE definitions point to fixed blocked (FB) data sets with
different (not 80) record lengths (LRECL).
Note that enabeling this option impacts performance, as
Developer for System z will now allocate a work data set with
the correct record length for each member being processed.
# DYNAMIC-VB-DATASET-ALLOC
Uncomment and specify YES if some of the CA Endevor(R) SCM
TYPE definitions point to variable blocked (VB) data sets with
different record lengths (LRECL).
Note that enabeling this option impacts performance, as
Developer for System z will now allocate a work data set with
the correct record length for each member being processed.
# DATASET-ALLOC-OVERRIDE
Uncomment and specify allocation options to override default
values used by Developer for System z to dynamically allocate
work data sets.
This directive is only honored if DYNAMIC-VB-DATASET-ALLOC or
DYNAMIC-FB-DATASET-ALLOC is YES.
The options specified here must adhere to TSO ALLOCATE rules.
Default allocation parameters are taken from the BROWSEV (for
VB) and BROWSE (for FB) allocation done by SFELPROC(CRANDVRA).
****************************************************************
* Affected function: CA Endevor SCM(R) interface *
****************************************************************
* Description: new option *
****************************************************************
* Timing: post-APPLY *
****************************************************************
* Part: FEK.#CUST.PARMLIB(CRACFG) *
* [FEK.SFEKSAMP(CRACFG)] *
****************************************************************
This fix updates configuration file CRACFG, which is used by
Edit support for CA Endevor(R) SCM.
# DYNAMIC-FB-DATASET-ALLOC
Uncomment and specify YES if some of the CA Endevor(R) SCM
TYPE definitions point to fixed blocked (FB) data sets with
different (not 80) record lengths (LRECL).
Note that enabeling this option impacts performance, as
Developer for System z will now allocate a work data set with
the correct record length for each member being processed.
# DYNAMIC-VB-DATASET-ALLOC
Uncomment and specify YES if some of the CA Endevor(R) SCM
TYPE definitions point to variable blocked (VB) data sets with
different record lengths (LRECL).
Note that enabeling this option impacts performance, as
Developer for System z will now allocate a work data set with
the correct record length for each member being processed.
# DATASET-ALLOC-OVERRIDE
Uncomment and specify allocation options to override default
values used by Developer for System z to dynamically allocate
work data sets.
This directive is only honored if DYNAMIC-VB-DATASET-ALLOC or
DYNAMIC-FB-DATASET-ALLOC is YES.
The options specified here must adhere to TSO ALLOCATE rules.
Default allocation parameters are taken from the BROWSEV (for
VB) and BROWSE (for FB) allocation done by SFELPROC(CRANDVRA).).
SMP/E ACCEPT the prerequisites to facilitate an easy backout of the fix, if required. Note that once accepted, you cannot backout the accepted prerequisites.
This step can be skipped if there are no prerequisites, or if there is a reason to not make a prerequisite permanent.
You can accept the prerequisites by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//*
//* Change #globalcsi to the data set name of your global CSI.
//* Change #dzone to your CSI distribution zone name.
//*
//ACCEPT EXEC PGM=GIMSMP,REGION=0M
//SMPCSI DD DISP=OLD,DSN=#globalcsi
//SMPCNTL DD *
SET BOUNDARY(#dzone) .
ACCEPT SELECT(
UI35670
UI32110
UI26082
UI23762
) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR).
//*
SMP/E RECEIVE and APPLY the fix.
You can do this by submitting the job below. Add a job card and modify the parameters to meet your site's requirements before submitting.
//* //* Change hlq to the high level qualifier used to upload the fix. //* Change (2x) #globalcsi to the data set name of your global CSI. //* Change #tzone to your CSI target zone name. //* //RECEIVE EXEC PGM=GIMSMP,REGION=0M //SMPCSI DD DISP=OLD,DSN=#globalcsi //SMPPTFIN DD DISP=SHR,DSN=hlq.IBM.HHOP910.UI37833 //SMPCNTL DD * SET BOUNDARY(GLOBAL) . RECEIVE SELECT(UI37833) SYSMODS LIST . //* //APPLY EXEC PGM=GIMSMP,REGION=0M //SMPCSI DD DISP=OLD,DSN=#globalcsi //SMPCNTL DD * SET BOUNDARY(#tzone) . APPLY SELECT(UI37833) REDO COMPRESS(ALL) BYPASS(HOLDSYS,HOLDERROR). //*
Restart started tasks to activate changes.