#*******************************************************************************
# VideoCharger version 7 - 5648-B60.                                           *
# (C) Copyright IBM Corp. 1997, 1998                                           *
# All Rights Reserved.                                                         *
#                                                                              *
# US Government Users Restricted Rights                                        *
# Use, duplication or disclosure restricted by GSA ADP Schedule                *
# Contract with IBM Corp.                                                      *
# Licensed Materials - Property of IBM                                         *
#*******************************************************************************
#                                                                              *
# IBM VideoCharger Server for Windows Version 7.1.0 - Service Level 3          *
#                                                                              *
#*******************************************************************************

FILES IN THIS DIRECTORY:
(1) "readme.CN.txt"  - This readme file
(2) "vc71fp3_zh_CN.msp" - VideoCharger Server Version 7.1.0 - Service Level 3
                          for Windows installable program.

  +--- NOTE: -------------------------------------------------------------+
  | This file contains information that is not currently contained in the |
  | formal documentation for VideoCharger.  Please read this entire file  |
  | before you install the associated product enhancements.               |
  +-----------------------------------------------------------------------+


CONTENTS
________

I.   SET OF FIXES IN SERVICE LEVEL 3

II.  INSTALLATION INSTRUCTIONS FOR SERVICE LEVEL 3

III. CIRCUMVENTION FOR INSTALL PROBLEM IF NAT (Network Address Translation)
     FEATURE IS PRESENT 

IV.  OPTIBASE ENCODER PROBLEM DESCRIPTION       

V.   INSTALLATION INSTRUCTIONS FOR OPTIBASE ENCODER FILES (if required)

VI.  TRADEMARKS


I.  SET OF FIXES IN SERVICE LEVEL 3
====================================

The following fixes are contained in the IBM VideoCharger Server
Version 7.1.0.0 - Service Level 3:

APAR JR17116  STAGING-VIP PROCESSES HANG AROUND AFTER THE VC HAS              
              BEEN STOPPED  
APAR JR17238  VSCONFIG UNABLE TO CHANGE VSADMIN PASSWORD  
APAR JR16964  UNICAST FAILS.
APAR JR16965  MULTICAST METADATA HAS INCORRECT IP ADDRESS FOR SERVERADDR
APAR JR16805  NETWORK CALIBRATION INCORRECT ON WINDOWS2000
APAR JR16622  MULICAST JOB WILL NOT LOOP

APAR JR16393 CONTROL SERVER WILL NOT RELEASE ALLOCATED BANDWIDTH 
     
APAR JR15823 MEMORY OVERLAY CAUSES MEMORY EXCEPTION CHECK
APAR JR16496 ONLY ONE OPTIBASE LIVE MULTICAST CAN BE SCHEDULED AT A TIME
APAR JR16388 VSDELETE COMMAND IS CASE SENSITIVE
APAR JR16485 DEX PROCESS WILL SOMETIMES CONSUME ALL OF THE AVAILABLE CPU
APAR JR16198 THE VSLIST COMMAND WILL TAKE UP TO 12 SECONDS TO COMPLETE.
APAR IY20154 MPEG1 WITH STARPOS OFFSET TO MAC WITH QUICKTIME5 - FAILS

Service Level 3 includes all of the fixes previously contained 
in service level 1 and service level 2. 


II.  INSTALLATION INSTRUCTIONS FOR SERVICE LEVEL 3
===================================================

To install VideoCharger Server Version 7.1.0 - Service Level 3:

 1. Run the command "vsversion" at MS-DOS command prompt.  
    Verify "VideoCharger Server Version = 7.1.0" 
    ("Service Level" can be 0, 1 or 2)

 2. Locate your installation media (normally this would be the original 
    VideoCharger install CD.  However, if you installed from the 
    download or ESD version you will need to locate that file). The 
    installation media will be required later on during the service 
    install procedure. 

 3. Shut down and reboot your machine to ensure that all file locks are 
    released.
                                            
 4. Download the file "vc71fp3_zh_CN.msp" in binary mode to a temporary
    subdirectory on your workstation.  You may need to use the "Save 
    Next Link As..." or "Save to Disk" functions of your Web browser.

 5. After the download is complete, quit your Web browser.

 6. If you  originally installed VideoCharger from a CD, insert the CD
    into the server's CD-ROM drive. (If the CD-ROM drive is set to 
    auto run the VideoCharger installation program will start.  Exit
    the program)
 
 7. Right click on "Start" on your Windows task bar. Select "Explore" to
    bring up Windows Explorer. Find and double-click on the file you 
    downloaded in step 4.

 8. Follow the instructions on your screen to complete the installation. 

 9. After the installation is complete VideoCharger server will be
    stopped. Run the command "vsstart" at a MS-DOS command prompt to start
    the server.  

 
III. CIRCUMVENTION FOR INSTALL PROBLEM IF NAT (Network Address Translation)
     FEATURE IS PRESENT 
============================================
If the NAT feature was previously installed, then during the install of 
service level 3 you will see the error message:

"Error 1309.Error reading from file:
D:\en_US\Serv\program files\IBM\IBM Videocharger
Server\nat.opt.  Verify that the file exists and that 
you can access it."

There are three option buttons: Abort, Retry and Ignore.
Select "Ignore" button and the upgrade will complete
successfully.


IV. OPTIBASE ENCODER PROBLEM DESCRIPTION       
============================================
On VideoCharger for Windows 7.1 , when trying to configure an Optibase
encoder port you may get the following message: 

Configure Encoder Port Failed, rc=.680000e 
C:\PROGRA~1\IBM\IBMVID~1\bin\mkvsport.exe -l "Optibase" -h "Optibase" 
-m "SYSTEM" -s "COMPOSITE" -g "2" -V "1330000" -A "192000" -t "MPEG1" > 
"C:\Program Files\IBM\IBM VideoCharger Server\data\tmp\CF2" 
Error: Unable to open port, rc=0x680000e 

Some files required to load the Optibase drivers may not be present on 
your system. The files must be installed manually. The files are available 
in the /ps/products/videocharger/fixes/v7.1/win_server/en_US/csd/ directory
See directions below. 
 

V. INSTALLATION INSTRUCTIONS FOR OPTIBASE ENCODER FILES (if required)
 =====================================================================
To install the Optibase files do the following:


 1. Run the command "vsstop" at MS-DOS command prompt to stop the 
    VideoCharger server.

 2. Run "vsconfig -D" command to determine the directory that VideoCharger 
    Server is installed in.  The "LANTV Directory=" keywords will show 
    that information (If you installed VideoCharger in the default 
    directory you will see
    "LANTV Directory=c:\Program Files\IBM\IBM VideoCharger Server")

 3. Go to the ..\bin\ sub-directory where VideoCharger is installed
    (in the default case it would be 
    "c:\Program Files\IBM\IBM VideoCharger Server\bin")
    Place the 3 Optibase files (msvcirt.dll, msvcp60.dll, msvcrt.dll) in
    this directory.

  4. Run the command "vsstart" to start the server.
     After VideoCharger has started try defining the encoder port again. 


VI.  TRADEMARKS
========================================================================
IBM, VideoCharger and DB2 are registered trademarks of the International 
Business Machines Corporation.

Windows is a trademark of Microsoft Corporation.

Optibase is a trademark of Optibase Inc.