Visit the our Home Pages on the Internet: NetWare for SAA http://www.software.ibm.com/enetwork/commserver/support/ +-------------------------------------------------------------------+ | | | DATE: 03/31/99 | | | | DESCRIPTION: SAA40010 - PTF 10 _____________________________ | | | | README FILE FOR: NetWare for SAA Version: 4.00__ | | | | PTF NUMBER: SAA40010 | | APAR NUMBER: JR12991 | | | | This package contains APAR fixes to the product above. This | | package can be distributed to any one who has a license for | | this product. | | | +-------------------------------------------------------------------+ PROBLEMS FIXED: APAR Number Description 9985 tn3270 not processing SMA_DGN_SEARCH_ACK primitive correctly. JR12868 Correct max_ifrm_rcvd for V3 links with incorrect defaults 9970 TN3270 Selected Systems not initialized correctly when DLURHost 9960 Hang on CSDOWN after TN stress run 9961 CMSPX Unloaded - Cannot find matching request for building seco 9974 NWTN5250:Error opening sys:system\nwsaa\trace\tn5cnvlg\global.l 9946 TN3270 client exceed session limit when one client terminates 9993 problem tn5250 using up all sessions on all lus 9978 Change slowdown backout to conform to architecture. 9933 Code cleanup and commenting. JR12916 SAA 3.0 should issue 0813 instead of 081B if bid in bracket JR12898 Cannot start new sessions 9951 config gui not allowing changes 9873 node ops - rtp connection - complete route not shown 9870 Double Fault Processor exeception in ISR 9980 RECEIVE_TDU_TP permanently disabled 9930 HPR/RTP pipe from Sonoma to Napa not supporting control flows 9982 EN to EN link will not establish in parallel BRx config 9984 Trap when issuing a CSDSPY CON, out of memory 9907 Branch node is returning a bad control vector. 9976 aping fails with 08951401 with cascaded BRx and HPR INSTALLATION INSTRUCTIONS: SAA40010.EXE (*.EXE in the steps below) is a self-extracting file containing the shipped executables. The PARTS LIST is as follows: SHIPPED (fn ft) REPLACES SAACFG.EXE NWTN3270.NLM NWTN5250.NLM COMMEXEC.NLM ADMINAPI.NLM AS400PCS.NLM IWAPI.NLM APPN.NLM Installing the fix on the system: 1) Be SURE to download the *.EXE file in BINARY format. 2) Create a Temp directory on the server and copy *.EXE into the temp directory and unzip the file. The directory will now contain three new files. 40010.exe, expand.bat, readme.txt. From a dos prompt, type: expand 3) Stop NetWare for SAA. 4) From the server, type load install (nw411) or nwconfig (nw50) Choose Product Options Choose Install a Product Not Listed Press F3 and specify the path where the patch is located on the server (ie - sys:\temp) Choose the language version of the server. 5) After the patch has been installed, down the server and Restart Netware for SAA 6) For all workstations where the Netware for SAA Configurator has been installed, copy the file saacfg.exe from the temporary directory\saamgmt to the nwsaa directory on the managemnt workstation. CONTACT FOR Support: If you have any questions, please call the IBM SUPPORT CENTER for your Country. For example in the USA call: 1-800-237-5511 COPYRIGHT INFORMATION: Copyright Novell Inc. and International Business Machines Corp. 1997. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, transmitted, or translated into any language without the express written consent of the publisher: Novell Inc. International Business Machines Corp. 2180 Fortune Drive P.O. Box 12195 San Jose, CA 95131 Research Triangle Park, NC 27709-2195 U.S.A. U.S.A. Note to U.S. Government Users - Documentation related to restricted rights - Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp. LIMIT OF LIABILITY: License to the contained APAR fixes is conditioned upon the recipient holding a license to the prerequisite product. The license terms and conditions of the APAR fixes are the same as those for the prerequisite product. Please see the product license for specifics.