Visit the our Home Pages on the Internet:

  NetWare for SAA    
            http://www.software.ibm.com/network/commserver/support/ 


+-------------------------------------------------------------------+
|                                                                   |
| DATE: 01/31/00                                                    |
|                                                                   |
| DESCRIPTION:  NOT ALL PUS ARE ACTIVATED DURING STARTUP.           |
|                                                                   |
| README FILE FOR:  NetWare for SAA Version: 4.0___                 |
|                                                                   |
| PTF NUMBER:                                                       |
| APAR NUMBER: JR14207                                              |
|                                                                   |
| This package contains APAR fixes to the product above.  This      |
| package can be distributed to any one who has a license for       |
| this product.                                                     |
|                                                                   |
+-------------------------------------------------------------------+


PREREQUISITES

    PTF: SAA40010 must be installed for this package to successfully 
         work. Please refer to the Web page listed above to obtain 
         this PTF.  For additional technical assistance contact the 
         appropriate SUPPORT CENTER for your Country listed on the 
         above Web page.  For example in the U.S.A. you can call 
         1-800-237-5511.

CO-REQUISITES
The following corequisites must be installed in addition to the installation of
this APAR to successfully work. Please refer to the Web page listed above to
obtain these corequisites.

APAR		Description

JR13805         Commexec
JR13954		SMA
JR14204		CMTCP/CMSPX


PROBLEM FIXED: 
  Customer migrated from NWSAA rel. 220 to 400. They have 27 PUs
configured. If they start NWSAA not all of them get activated
(every time a different number). CSSTATUS screen where you can
display the PUs (NWSAA) does not show all the PUs. However,   
if you go to the screen where you can activate/deactivate the 
links all PUs show up with status connected. In addition the  
server goes into high utilization (99%) caused by the 
STREAMS Q RUNNER process.                                 

The PD.LOG shows the following error:                         
**** PROBLEM 0:90 (11) -NetWare:7e005aû ****                  
User Message ID: 0x0021000b -- An request to allocate streams 
memory for a CNSDGNUnlock has failed.                         

When the available memory was checked it had about 80MB left. 
               
If he configures all PUs not to automatically start and then 
activates them via CSSTATUS, everything works fine.          
If he deletes some (ex: 4) of the PUs it works  fine. 

INSTALLATION INSTRUCTIONS:
  JR14207.exe (*.exe in the steps below) is a self-extracting 
file containing the shipped executables.

The PARTS LIST is as follows:

  SHIPPED (fn ft)         REPLACES 
    nwsaa.nlm               nwsaa.nlm(sys:system\nwsaa)
    nwsaa.map               debug module(sys:system\nwsaa)
    nwsaadbg.map            debug module(sys:system\nwsaa\debug)
    nwsaadbg.nlm            nwsaa.nlm(sys:system\nwsaa\debug)

Installing fix on System

      1) Be SURE to download the *.exe file in BINARY format.

      2) Create a Temp directory and copy *.exe into the temp 
         directory and unzip the file.

      3) Stop NetWare for SAA.

      4) Backup your previous versions of the parts listed in the
         SHIPPED/REPLACED columns in some manner and apply the parts 
         in their place.

         IMPORTANT! If this is an APAR fix, carefully compare the dates
         of the parts supplied with this APAR fix with the dates of the
         parts you are replacing. If ANY of the parts being replaced are
         more recent than the parts shipped with this APAR discontinue the
         installation of this fix and contact Customer Support for clarification. 
    
      5) Restart Netware for SAA.




CONTACT FOR Support:

      If you have any questions, please call the IBM SUPPORT CENTER
      for your Country.  For example in the USA call: 1-800-237-5511



COPYRIGHT INFORMATION:

         Copyright Novell Inc. and International Business Machines 
         Corp. 1997. All rights reserved.  No part of this publication
         may be reproduced, photocopied, stored on a retrieval system, 
         transmitted, or translated into any language without the 
         express written consent of the publisher:

         Novell Inc.             International Business Machines Corp.
         2180 Fortune Drive      P.O. Box 12195
         San Jose, CA 95131      Research Triangle Park, NC 27709-2195
         U.S.A.                  U.S.A.

        
         Note to U.S. Government Users - Documentation related to 
         restricted rights - Use, duplication or disclosure is subject 
         to restrictions set forth in GSA ADP Schedule Contract with IBM 
         Corp.



LIMIT OF LIABILITY:

   License to the contained APAR fixes is conditioned upon the recipient
   holding a license to the prerequisite product.  The license terms
   and conditions of the APAR fixes are the same as those for the
   prerequisite product.  Please see the product license for specifics.