DB2 Server for VSE & VM: Data Restore Guide

Complete the Preinstallation Checklist

Before beginning, ensure that you have completed the following:

__  1.	Read Chapter 1, How to Recover from Failures.
__  2.	Installed DB2 Server for VSE & VM Version 7 Release 1 with at least one Version 7 Release 1 database available. This database is required to verify the installation of Data Restore.
__  3.	Decided whether you are installing in a VM, VSE, or VSE Guest Sharing environment.
__  4.	Provided enough space on DASD as shown in Figure 8 or Figure 9. Figure 8. Minidisk Space Calculation for Data Restore VM Installation 3375 : 16 CYLINDERS 3380 : 10 CYLINDERS 3390 : 9 CYLINDERS 9345 : 10 CYLINDERS FBA : 10000 BLOCKS Figure 9. Sublibrary Space Calculation for Data Restore VSE Installation 3375 : 5 CYLINDERS 3380 : 4 CYLINDERS 3390 : 3 CYLINDERS 9345 : 4 CYLINDERS FBA : 2932 BLOCKS Note: If you are installing in a VSE Guest Sharing environment, obtain the total DASD requirement by adding the VM and VSE requirements.
__  5.	Checked with your IBM Support Center or used either Information/Access or IBMLink (ServiceLink) to see whether there is any additional Preventive Service Planning (PSP) information that you should be aware of.
__  6.	Ensured that the userid SQLDBA is defined in your database with DBA authority.
__  7.	Ensured that you have three public dbspaces available, having 6400, 1024, and 128 pages respectively.
__  8.	Verified that the server is running and that ISQL is available.
__  9.	Ensured that a tape drive is available to be attached to load Data Restore.