| Component
| Hardware/Software Requirements
| Communications
|
- DB2 Run-Time Client for AIX
- DB2 Administration Client for AIX
- DB2 Software Developer's Kit for AIX
| RISC System/6000 and the following:
| APPC or TCP/IP
- For APPC connectivity, you require IBM eNetwork Communications Server
Version 5.0.2.4 or later for AIX
- The AIX base operating system provides TCP/IP connectivity, if
selected during install.
| Note: | If you plan to use DCE (Distributed Computing Environment), you require a DCE
product that is provided by the AIX Version 5 operating system with its latest
DCE PTF.
|
|
- DB2 Run-Time Client for HP-UX 10.20
- DB2 Administration Client for HP-UX 10.20
- DB2 Software Developer's Kit for HP-UX
| HP 9000 Series 700 or 800 system and the following:
- HP-UX Version 10.20 or later
The following patches are required:
- For HP-UX Version 10.20
- PHSS_10556
- PHSS_10436
- PHSS_10053
- PHSS_10113
- For systems with the ANSI C or C++ compilers:
- PHSS_10261
- PHSS_7505
- PHSS_9096 for C++
| APPC or TCP/IP
- For APPC connectivity, HP-UX Version 10.20 requires the
following:
- SNAplus2 and the following components:
- SNAplus2 Link Version A.10.10
- SNAplus2 API Version A.10.10
| Note: | If you plan to use DCE (Distributed Computing Environment) with Version 6 of
the DB2 Universal Database products, you require a DCE product that is at OSF
DCE level 1.1, which is provided by the HP-UX Version 11 and later
operating system.
With DB2 Connect, you must install DCE Directory Services on the client and
the DRDA server. You do not need DCE installed on a DB2 Connect
Enterprise Edition server.
|
|
- DB2 Run-Time Client for HP-UX for 11.00
- DB2 Administration Client for HP-UX for 11.00
- DB2 Software Developer's Kit for HP-UX
| HP 9000 Series 700 or 800 system and the following:
- HP-UX Version 11.00 or later
| APPC or TCP/IP
- For APPC connectivity, you require either of the following:
- SNAplus2 Link R6.11.00.00
- SNAplus2 API R6.11.00.00
| Note: | If you plan to use DCE (Distributed Computing Environment), you require a DCE
product that is provided by the HP-UX Version 11 base operating system.
|
|
- DB2 Run-Time Client for Linux
- DB2 Administration Client for Linux
- DB2 Software Developer's Kit for Linux
|
- Linux kernel 2.0.35 or higher;
- glibc Version 2.0.7 or higher;
- pdksh package (required to run the DB2 command line processor);
and
- libstdc++ Version 2.8.0 or higher.
To install DB2, you will need rpm.
| TCP/IP
- The Linux base operating system provides TCP/IP connectivity, if
selected during install. APPC connectivity is not provided in this
release.
|
- DB2 Run-Time Client for OS/2
- DB2 Administration Client for OS/2
- DB2 Software Developer's Kit for OS/2
|
- OS/2 Warp Version 3 and Version 4
- OS/2 Warp Connect Version 3
- OS/2 Warp Server Version 4
- OS/2 Warp Server Advanced V4
- OS/2 Warp Server Advanced V4 with SMP Feature
- OS/2 Warp Server for e-business
| APPC, IPX/SPX, NetBIOS, or TCP/IP
- For APPC connectivity, you require IBM eNetwork Communications Server for
OS/2 Warp Version 5 or IBM eNetwork Personal Communications for OS/2 Warp
Version 4.2.
- For IPX/SPX connectivity, you require the Novell NetWare client for OS/2
Version 2.10 or later. IPX/SPX can only be used to connect to
local databases. It cannot be used to connect to host or AS/400
databases.
- For NetBIOS connectivity, you require IBM NTS/2 Version 1.0, IBM
eNetwork Communications Server for OS/2 Warp Version 5, IBM eNetwork Personal
Communications for OS/2 Warp Version 4.2, or IBM OS/2 LAN
Requester. NetBIOS can only be used to connect to local
databases. It cannot be used to connect to host or AS/400
databases.
- For TCP/IP connectivity, you require IBM TCP/IP Version
2.0 or later.
- The OS/2 base operating system provides Named Pipes (Local)
connectivity. Named Pipes is supported in DOS and WIN-OS/2
sessions.
Notes:
- Net.Data requires OS/2 Warp Version 3 or later and a Web
server such as IBM's Internet Connection Server.
- For DCE Cell Directory Services Support (CDS) for DB2 Clients for OS/2,
you must install IBM Distributed Computing Environment Cell Directory Service
client, Version 2.10, on each client workstation.
- If you are planning to use ADSM, PTF 3 for ADSTAR Distributed Storage
Manager (ADSM) Version 3 is required for an OS/2 client.
|
- DB2 Run-Time Client for Silicon Graphics IRIX
- DB2 Administration Client for Silicon Graphics IRIX
- DB2 Software Developer's Kit for Silicon Graphics IRIX
|
| TCP/IP
- The Silicon Graphics IRIX base operating system provides TCP/IP
connectivity.
|
- DB2 Run-Time Client for Solaris
- DB2 Administration Client for Solaris
- DB2 Software Developer's Kit for Solaris
| Solaris SPARC-based computer and the following:
- Solaris Version 2.5.1 or later
The following patches are required for Solaris version
2.5.1:
- 101242 Rev. 11 or higher
- 103566 Rev. 08 or higher
- 103600 Rev. 13 or higher
- 103640 Rev. 20 or higher
The following patches are required for Solaris version 2.6:
- 105568 Rev. 12 or higher
- 105210 Rev. 13 or higher
- 105181 Rev. 06 or higher
| APPC or TCP/IP
- For APPC connectivity, you require SunLink SNA 9.0 or later and the
following:
- SunLink P2P LU6.2 9.0 or later
- SunLink PU2.1 9.0 or later
- SunLink P2P CPI-C 9.0 or later
- The Solaris base operating system provides TCP/IP
connectivity.
| Note: | If you plan to use DCE (Distributed Computing Environment), you require a DCE
product with Transarc DCE Version 1.1 for Solaris 2.5 and
2.5.1, patch level 18 or higher.
|
|
- DB2 Run-Time Client for Windows 9x
- DB2 Administration Client for Windows 9x
- DB2 Software Developer's Kit for Windows 9x
|
- Windows 95 4.00.950 or later
- Windows 98
| IPX/SPX, Named Pipes, NetBIOS, or TCP/IP
- The Windows 9x base operating system provides NetBIOS, IPX/SPX,
TCP/IP, and Named Pipes connectivity.
| Note: | IPX/SPX connectivity is only supported to Windows NT servers.
|
- If you plan to use LDAP (Lightweight Directory Access Protocol), you
require the IBM eNetwork LDAP Directory Client Version 3.1. For
more information, refer to the Administration Guide.
|
- DB2 Run-Time Client for Windows NT
- DB2 Administration Client for Windows NT
- DB2 Software Developer's Kit for Windows NT
|
- Windows NT Version 4.0 with Service Pack 3 or later
- Windows Terminal Server (can only run the DB2 Run-Time Client)
| APPC, IPX/SPX, Named Pipes, NetBIOS, or TCP/IP
- The Windows NT base operating system provides NetBIOS, IPX/SPX,
TCP/IP, and Named Pipes connectivity.
- For APPC connectivity, you require one of the following products:
- IBM eNetwork Communications Server for Windows NT V5.01 or
later.
- IBM eNetwork Personal Communications for Windows NT V4.2 or
later.
- Microsoft SNA Server Version 4 Service Pack 2 or later
- Wall Data Rumba
- If you plan to use DCE (Distributed Computing Environment) with Version 6
of DB2 Universal Database, you will need to ensure that if you are connecting
to DB2 for OS/390 V5.1 database that it is enabled for DCE support
using OS/390 DCE Base Services Version 3.
- If you plan to use LDAP (Lightweight Directory Access Protocol), you
require the IBM eNetwork LDAP Directory Client Version 3.1. For
more information, refer to the Administration Guide.
- If you plan to use the ADSTAR Distributed Storage Manager (ADSM)
facilities for backup and restore of your databases, you require the ADSM
Client Version 3 or later.
- If you have the IBM Antivirus program installed on your operating system,
it must be Version 3.0 or later.
|
