IBM Books

Quick Beginnings for Windows NT**


Software Requirements

This section outlines the software required to run DB2 products.

Server Product Requirements

Table 4 lists the operating system and communications software required for DB2 Universal Database.

Table 4. Software Requirements
Product Hardware/Software Requirements Communications
Windows 32-bit Operating Systems

  • DB2 Universal Database

  • Windows NT Version 4.0 with Service Pack 3, or later

APPC, TCP/IP, and MPTN (APPC over TCP/IP)

  • The Windows NT base operating system provides NetBIOS, IPX/SPX, Named Pipes, and TCP/IP connectivity.

For SNA (APPC) connectivity, one of the following communication products is required:

  • IBM Communications Server for Windows NT Version 5.01 or later

  • IBM Personal Communications for Windows NT Version 4.1 or later

  • Microsoft SNA Server Version 4 Service Pack 2 or later

Notes:

  1. If SNA two-phase commit is necessary, then IBM Communications Server for Windows NT Version 5.01 or later is required.

  2. If you plan to use DCE (Distributed Computing Environment) with Version 6 of DB2 Universal Database, you will need:

    • A DCE product that is at OSF DCE level 1.1 with IBM DCE for Windows NT Version 2.0.

    • To ensure that if you are connecting to DB2 for OS/390 V5.1 database that it is enabled for DCE support using OS/390 DCE Base Services Version 3.

    In addition, DB2 also supports Gradient PC-DCE for Windows 32-bit operating systems Version 2.0 Runtime Media Kit.

  3. If you plan to use LDAP (Lightweight Directory Access Protocol), you require the IBM eNetwork LDAP Directory Client Version 3.1. For more information, refer to the Administration Guide.

  4. If you plan to use the ADSTAR Distributed Storage Manager (ADSM) facilities for backup and restore of your databases, you require the ADSM Client Version 3 or later.

  5. If you have the IBM Antivirus program installed on your operating system, it must be Version 3.0 or later.

  6. If you plan to use the Simple Network Management Protocol (SNMP) subagent, you require DPI 2.0 provided by IBM Netfinity Agent.

Client Product Requirements

Table 5 lists the software requirements needed for a DB2 Administration Client, DB2 Run-Time Client, or a DB2 Software Developer's Kit.

Table 5. Software Requirements for Clients
Component Hardware/Software Requirements Communications

  • DB2 Run-Time Client for Windows 9x

  • DB2 Administration Client for Windows 9x

  • DB2 Software Developer's Kit for Windows 9x

  • Windows 95 4.00.950 or later

  • Windows 98

IPX/SPX, Named Pipes, NetBIOS, or TCP/IP

  • The Windows 9x base operating system provides NetBIOS, IPX/SPX, TCP/IP, and Named Pipes connectivity.
    Note:IPX/SPX connectivity is only supported to Windows NT servers.

  • If you plan to use LDAP (Lightweight Directory Access Protocol), you require the IBM eNetwork LDAP Directory Client Version 3.1. For more information, refer to the Administration Guide.

  • DB2 Run-Time Client for Windows NT

  • DB2 Administration Client for Windows NT

  • DB2 Software Developer's Kit for Windows NT

  • Windows NT Version 4.0 with Service Pack 3 or later

  • Windows Terminal Server (can only run the DB2 Run-Time Client)

APPC, IPX/SPX, Named Pipes, NetBIOS, or TCP/IP

  • The Windows NT base operating system provides NetBIOS, IPX/SPX, TCP/IP, and Named Pipes connectivity.

  • For APPC connectivity, you require one of the following products:

    • IBM eNetwork Communications Server for Windows NT V5.01 or later.

    • IBM eNetwork Personal Communications for Windows NT V4.2 or later.

    • Microsoft SNA Server Version 4 Service Pack 2 or later

    • Wall Data Rumba

  • If you plan to use DCE (Distributed Computing Environment) with Version 6 of DB2 Universal Database, you will need to ensure that if you are connecting to DB2 for OS/390 V5.1 database that it is enabled for DCE support using OS/390 DCE Base Services Version 3.

  • If you plan to use LDAP (Lightweight Directory Access Protocol), you require the IBM eNetwork LDAP Directory Client Version 3.1. For more information, refer to the Administration Guide.

  • If you plan to use the ADSTAR Distributed Storage Manager (ADSM) facilities for backup and restore of your databases, you require the ADSM Client Version 3 or later.

  • If you have the IBM Antivirus program installed on your operating system, it must be Version 3.0 or later.


[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]

[ DB2 List of Books | Search the DB2 Books ]