IBM DB2 Universal Database* for HP-UX** (64-bit) Version 7 FixPak 5 ------------------------------------------------------------------------ Contents Overview of FixPak for IBM DB2 Universal Database* for HP-UX** (64-bit) Version 7 FixPak 5 HP-UX (64-bit) Installation Notes * 2.1 Prerequisites * 2.2 Prior to Installation * 2.3 Installation Instructions * 2.4 Migration to 64-bit HP-UX (64-bit) * 2.5 After Installation o 2.5.1 Update Instances to use the New Fix Level o 2.5.2 Updating Instances to use 64-bit o 2.5.3 Enabling the New SQL Built-in Scalar Functions o 2.5.4 Rebinding Bind Files + 2.5.4.1 Rebinding to Non-DRDA DB2 Databases + 2.5.4.2 Rebinding to DRDA Databases + 2.5.4.3 Rebinding Specific Packages * 2.6 Special Notes o 2.6.1 Loss of Control Center Functionality o 2.6.2 Restoring backup images created under FixPak 4 or greater Service * 3.1 Product and Service Technical Library * 3.2 Customer Support * 3.3 Corrective Service Notices ------------------------------------------------------------------------ Overview of FixPak for IBM DB2 Universal Database* for HP-UX** (64-bit) Version 7 FixPak 5 IBM DB2 Universal Database* for HP-UX** (64-bit) Version 7 FixPak 5 PTF: U480365 VRMF: 7.1.1.55 Note: To read this file more easily, set your font to monospace. If you have received special fixes from IBM support since 12/11/2001, then you must contact IBM support to request an updated version of the special fixes instead of installing this FixPak. By doing this, you are assured that your system is in a consistent state and no special fixes are lost. This README file contains information for the following products and components: * DB2 Administration Client, Version 7 FixPak 5 * DB2 Application Development Client, Version 7 FixPak 5 * DB2 Connect Enterprise Edition, Version 7 FixPak 5 * DB2 Query Patroller, Version 7 FixPak 5 * DB2 Run-Time Client, Version 7 FixPak 5 * DB2 UDB Enterprise Edition, Version 7 FixPak 5 * DB2 UDB Enterprise-Extended Edition, Version 7 FixPak 5 Note: The following problem will be encountered unless you have downloaded this FixPak from the web. Due to very long names of "tivready" files, to mount the CD_ROM you have to run the following commands. Otherwise, files with long names cannot be read. TO MOUNT (go to /usr/sbin/ and run this command) pfs_mountd & pfsd 4 & pfs_mount -t rrip /dev/dsk/ /SD_CDROM where is the mounting point (eg. /dev/dsk/c2t2d0) TO UNMOUNT pfs_umount /SD_CDROM ps -fe | grep pfs* kill -9 Check to see if any pfs* processes are running. is the pfs* process ID number. If you did not terminate all the ptf* processes, the CD_ROM will not be released. For additional information on changes to the product, review the product Release Notes: /opt/IBMdb2/V7.1/Readme/%L/Release.Notes where %L is the locale name. ------------------------------------------------------------------------ HP-UX (64-bit) Installation Notes ------------------------------------------------------------------------ 2.1 Prerequisites You should have DB2 UDB V7.2 or DB2 UDB V7.1 with FixPak 3 or greater already installed before installing this FixPak. To determine if the required prerequisites are installed, issue the following command: swlist -l product "*DB2*" The output of the command should include the following: DB2V7CAE 7.1.y.x [product name] or, PDB2... 7.1.y.x Product Patch where y is either 0 or 1, and x must be larger than or equal to 40, but less than the product fix level. You can find the product fix level from the VRMF. For example, if VRMF is 07.01.0000.0050, then x must be less than 50 (x<50) in order to apply the FixPak. ------------------------------------------------------------------------ 2.2 Prior to Installation Logon as root and enter the following commands for each instance: su - ioname . $HOME/sqllib/db2profile db2 force applications all db2 terminate db2stop db2licd end # run at each physical node exit where ioname is the instance owner name. Then, while still logged on as root, enter the following commands: su - aname . $HOME/sqllib/db2profile db2admin stop exit where aname is the administration server name. ------------------------------------------------------------------------ 2.3 Installation Instructions To install the FixPak: su - root cd ./installpatch ------------------------------------------------------------------------ 2.4 Migration to 64-bit HP-UX (64-bit) To start using 64-bit DB2 on HP-UX, you must download and install the 64-bit HP-UX FixPak. This FixPak includes all 32-bit fixes as well as adds 64-bit DB2 functionality to your system. Once you have installed this FixPak, you cannot install 32-bit FixPaks, and must gain any new fixes through the 64-bit FixPaks. To install DB2 UDB 64-bit FixPak for HP-UX with all the prerequisites in apply state, run the `installallpatch` script that came with the FixPak. Note: If you have already applied 32-bit FixPaks and you decide to move to 64-bit, it is highly recommended that you use a 64-bit FixPak of at least the same level so you do not lose any fixes that you had before moving to 64-bit. ------------------------------------------------------------------------ 2.5 After Installation 2.5.1 Update Instances to use the New Fix Level Note: You need to be logged on as root to update the instances. For each instance, issue the command: /opt/IBMdb2/V7.1/instance/db2iupdt iname where iname is the instance name. Note: If you are running both Enterprise - Extended Edition (EEE) and Enterprise Edition (EE) on the same machine, then you need to run db2iupdt with the "-k" option. Otherwise, it will check to see if EEE filesets exist; if they do, it will perform the update as if it was an EEE instance. For the DAS instance, issue the command: /opt/IBMdb2/V7.1/instance/dasiupdt dasname where dasname is the DAS instance name. For more information on the db2iupdt or dasiupdt commands, run db2iupdt or dasiupdt with the "-h" option. 2.5.2 Updating Instances to use 64-bit Once the instance has been updated to the current fix level with the above command, you may update individual instances to use 64-bit DB2. For each instance that you want to migrate to 64-bit, issue the command: /opt/IBMdb2/V7.1/instance/db2iupdt -w 64 iname where iname is the instance name. Once the instance has been migrated to 64-bit, it can not be migrated back to 32-bit. Only migrations from 32 to 64-bit require the "-w 64" flag. Applying further fixes to an existing 64-bit instance will not need the "-w 64" flag. 2.5.3 Enabling the New SQL Built-in Scalar Functions FixPak 2 and later of Version 7 delivers new SQL built-in scalar functions. Refer to the SQL Reference and updates in the Release Notes for a description of these new functions. The new functions are not automatically enabled on each database when the database server code is upgraded to FixPak 2 or later of Version 7.1. To enable these new functions, you must login as the instance (or a SYSADM user) and issue the command db2updv7, specifying each database for each instance. This command makes an entry in the database that ensures that database objects created prior to executing this command use existing function signatures that may match the new function signatures. WARNING about use of db2updv7: If you intend to issue the db2updv7 command, you must be aware that it will change the database to run only with Version 7.1 FixPak 2 (or higher) of the database manager. You will not be able to run this database with any previous FixPak level. You must perform a full offline backup of the database prior to running db2updv7 in order to have the ability to restore to a previous FixPak level. 2.5.4 Rebinding Bind Files Due to the new bind (.bnd) files that have been shipped with this FixPak, you will need to rebind your DB2 utilities against all your databases after the FixPak installation. This step is necessary for the fixes in this FixPak to become effective. The procedure of rebinding, outlined below, only needs to be performed once per database. 2.5.4.1 Rebinding to Non-DRDA DB2 Databases After applying fixes, you must do the following: - At a command prompt: db2 terminate db2 CONNECT TO db2 BIND /@db2ubind.lst BLOCKING ALL GRANT PUBLIC db2 BIND /@db2cli.lst BLOCKING ALL GRANT PUBLIC db2 terminate or, - At the DB2 command line: TERMINATE CONNECT TO BIND /@db2ubind.lst BLOCKING ALL GRANT PUBLIC BIND /@db2cli.lst BLOCKING ALL GRANT PUBLIC TERMINATE Where is the name of a database to which the utilities should be bound, and where is the full path name of the directory where the bind files are located, such as /sqllib/bnd. DB2UBIND.LST and DB2CLI.LST contain lists of commonly required bind files used for DB2. 2.5.4.2 Rebinding to DRDA Databases If you are using DB2 Connect to connect to host databases, you will also need to bind the new bind files to the host. As above, use the DB2 Command Line Processor to connect to the host database, and then bind the utilities as follows: HOST COMMAND ======= =================================================== MVS BIND /@ddcsmvs.lst BLOCKING ALL GRANT PUBLIC SQLERROR CONTINUE VM BIND /@ddcsvm.lst BLOCKING ALL GRANT PUBLIC SQLERROR CONTINUE VSE BIND /@ddcsvse.lst BLOCKING ALL GRANT PUBLIC SQLERROR CONTINUE OS400 BIND /@ddcs400.lst BLOCKING ALL GRANT PUBLIC SQLERROR CONTINUE Please refer to "Binding Applications and Utilities" in the DB2 Connect User's Guide for a list of bind files that are used for your specific client operating system. If a bind file changes and your clients do not use that bind file, you do not need to re-bind it. 2.5.4.3 Rebinding Specific Packages If you want to bind only the specific .bnd files to the database, issue the following commands for each database. - At a command prompt: db2 terminate db2 CONNECT TO db2 BIND / BLOCKING ALL GRANT PUBLIC db2 terminate or, - At the DB2 command line: TERMINATE CONNECT TO BIND / BLOCKING ALL GRANT PUBLIC TERMINATE where is the name of the bind file, and is the name of your database. ------------------------------------------------------------------------ 2.6 Special Notes 2.6.1 Loss of Control Center Functionality There should be no problems introduced against downlevel Control Center clients by applying FixPak 2 or FixPak 3 to a DB2 server. However, in DB2 Version 7.2, downlevel Control Center clients will lose nearly all functionality. Downlevel in this case refers to any Version 6 client prior to FixPak 6, and any Version 7 client prior to FixPak 2. Version 5 clients are not affected. The suggested fix is to upgrade any affected clients. Version 6 clients must be upgraded to FixPak 6 or later, and Version 7 clients must be upgraded to FixPak 2 or later. 2.6.2 Restoring backup images created under FixPak 4 or greater When the RELOCATE USING option is used with the db2inidb command, the user provided configuration file is copied into the database directory (for example, SQL00001) and is renamed to db2path.cfg. If the database was initialized as a snapshot then the db2path.cfg file will be removed after the necessary crash recovery completes. However, if the database was initialized as a standby then the file will only be removed after the database is taken out of the rollforward pending/in-progress state (by stopping or cancelling the rollforward). Databases can be backed up when in the rollforward pending/in-progress state. If the db2path.cfg file exists then it will be included in the backup image. Because this file is new to V7 beginning with FixPak 4, a restore of an image containing this file will fail on any V7 level earlier than FixPak 4. If restoring from such a backup image, the instance must be running with a DB2 level of FixPak 4 or greater. ------------------------------------------------------------------------ Service ------------------------------------------------------------------------ 3.1 Product and Service Technical Library For a complete and up-to-date source of DB2 information, including information on issues discovered after this readme was published, go to the following web sites: DB2 Product and Service Technical Library: http://www.ibm.com/software/data/db2/library DB2 Universal Database and DB2 Connect Online Support: http://www.ibm.com/software/data/db2/udb/winos2unix/support DB2 Universal Database and DB2 Connect Online Support - Technical Library Search: http://www-4.ibm.com/cgi-bin/db2www/data/db2/udb/winos2unix/support/techlib.d2w/report ------------------------------------------------------------------------ 3.2 Customer Support To speak to an IBM representative regarding assistance with this product, call 1-800-237-5511. Customer support is also provided through Electronic Question and Answer (Q&A) forums. These forums are accessible through CompuServe, IBMLink, and Usenet Newsgroup. 1. CompuServe o To access the forums on CompuServe, execute GO IBMDB2. o If you don't have access to CompuServe, call 1-800-848-8199 for membership information in Canada or the US. 2. Usenet Newsgroup: comp.databases.ibm-db2 o This Internet Newsgroup is a general forum for discussing questions and/or problems encountered using the DB2 family of products. 3. (IBMLink) Talklink OS/2 BBS o To access the forums on IBMLink, go to the OS2BBS section. o If you don't have access IBMLink, call 1-800-547-1283 for membership information in Canada or the United States. ------------------------------------------------------------------------ 3.3 Corrective Service You can access corrective service using the following methods: 1. FTP to anonymous server ftp.software.ibm.com. Go to ps/products/db2/fixes/%L/%P/ where %L is the appropriate locale (for example, english-us, spanish, german), and %P is the product name/version (for example db2ntv71). 2. Use a Web browser to connect to the DB2 UDB and DB2 Connect Online Support Page at: http://www.ibm.com/software/data/db2/udb/winos2unix/support 3. On CompuServe, execute GO IBMDB2. Then go to the appropriate library to find the FixPak. 4. On IBM PCC BBS (in US), call (919) 517-0001 (in Raleigh, North Carolina) and then type "db2" on the main menu to find the FixPaks. If you do not have access to any of the above locations, call 1-800-992-4777 to request these FixPaks be sent to you in the mail. For countries other than US and Canada, contact your local DB2 Customer Service number for assistance in obtaining them. ------------------------------------------------------------------------ Notices ------------------------------------------------------------------------------- * are trademarks or registered trademarks of IBM Corporation. ** are trademarks or registered trademarks of their respective owners. ------------------------------------------------------------------------------- ******************************************************************************* ** ** (c) COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION 2001. ** ALL RIGHTS RESERVED. ** *******************************************************************************