|The sections that follow describe how to set up Windows-based Version |7.2 DB2 Personal Edition and DB2 Workgroup Edition systems so that they |can be used as fully functional satellites in a satellite environment. |For information about the terms and concepts used in the information that |follows, refer to the Administering Satellites Guide and Reference. You can find this |book at the following URL: |http://www.ibm.com/cgi-bin/db2www/data/db2/udb/winos2unix/support/v6pubs.d2w/en_main
|For Technotes that supplement the information in the Administering Satellites Guide and Reference, refer to the following |URL: |http://www.ibm.com/cgi-bin/db2www/data/db2/udb/winos2unix/support/index.d2w/report
|To set up either DB2 Personal Edition or DB2 Workgroup Edition as |satellites, you require the following: |
|The DB2 control server is a DB2 Enterprise Edition system that runs on |Windows NT or AIX, and has the Control Server component installed. The |DB2 Enterprise Edition system that you use must be at Version 6 with FixPak 2 |or higher, or Version 7 at any FixPak level. |
|The DB2 control server instance is typically called DB2CTLSV, and the |satellite control database is called SATCTLDB. The DB2 control server |instance and the satellite control database are on the Enterprise Edition |system, and, on Windows NT, are automatically created when you install DB2 |with the Control Server component. If you install DB2 on AIX, see the |Administering Satellites Guide and Reference for information about |creating the DB2 control server instance and the satellite control |database.
|The Satellite Administration Center is the set of GUI tools that you use to |set up and administer the satellite environment. You access this set of |tools from the Control Center. For more information about the Satellite |Administration Center and the satellite environment, see the Administering Satellites Guide and Reference, and the online help that |is available from the Satellite Administration Center. If you are |running a Version 6 Control Center, see 11.1.4, Upgrading a Version 6 Control Center and Satellite Administration Center.
|If you have not already used the Satellite Administration Center to set up |the satellite environment and to create the object that represents the new |satellite in the Satellite Administration Center, you should do so before |installing the satellite. For more information, see the description of |how to set up and test a satellite environment in the Administering Satellites Guide and Reference.
|When you install either DB2 Personal Edition or DB2 Workgroup Edition, you |do not have to select any special component to enable either system to |synchronize. If you intend to perform a response file installation, see |Performing a Response File Installation for the keywords that you should specify when installing the |Version 7.2 system. If you are performing an interactive |installation of your Version 7.2 system, see 11.1.2, Configuring the Version 7.2 System for Synchronization after you finish installing DB2 for values that you must set |at the Version 7.2 system to enable it to synchronize.
|If you are performing a response file installation of Version 7.2 |DB2 Personal Edition or DB2 Workgroup Edition, you can set the following |keywords in the response file.
|If you decide to not specify one or more of these keywords during the |response file installation, see 11.1.2, Configuring the Version 7.2 System for Synchronization for additional steps that you must perform after installing |DB2 to enable the Version 7.2 system to synchronize. You can |also use the instructions in this section if you want to change any values |that were specified during the response file installation.
|
|After you complete the response file installation, the Version 7.2 |system is ready to synchronize. You should issue the db2sync |-t command on the satellite to verify that the values specified on the |satellite are correct, and that the satellite can connect to the satellite |control database.
|For additional information about performing a response file installation, |refer to the Administering Satellites Guide and Reference.
|Anmerkungen:
|In Version 6, the admin.userid and the |admin.password keywords could be specified during a response |file installation of DB2 Satellite Edition to specify the user ID and password |that would be used by the Remote Command Service. For Version |7.2 Personal Edition and Workgroup Edition, if you specify these |keywords, they are used for the DB2DAS00 instance on the Version 7.2 |system. For a DB2 Version 7.2 system, the Remote Command Service |will use the user ID and password that is used by the DB2 instance on the |system. If you do not specify values for db2.userid |and db2.password, the defaulting rule described above |applies.
|If you install the Version 7.2 system interactively, several values |must be set on the DB2 Personal Edition or DB2 Workgroup Edition system after |installing DB2 before the system can synchronize.
|
|If you install DB2 Personal Edition or DB2 Workgroup Edition interactively, |the satellite ID is automatically set to the user ID that was used to install |DB2. If you want to use this user ID as the satellite ID, you do not |have to perform this step. For information about setting the satellite |ID, see the Administering Satellites Guide and Reference.
|If you install DB2 Personal Edition or DB2 Workgroup Edition interactively, |the application version on the satellite is automatically set to |V1R0M00. If you want to use this value as the application version, you |do not have to perform this step.
|You can use the db2sync -g command on the satellite to view the |current setting of the application version. If you want to change this |value, issue the db2sync -s command. You are prompted to |provide a new value for the application version. For more information |about setting the application version, see the Administering Satellites Guide and Reference.
|You can also use the db2sync -t command on the satellite to open |the DB2 Synchronizer application in test mode. If the SATCTLDB database |is not cataloged at the satellite when you issue the command, the Catalog |Control Database window opens. You can either use the DB2 discovery |feature that is available from the Catalog Control Database window to catalog |the DB2 control server and the SATCTLDB database, or you can type the hostname |and server name in this window. You will also be prompted to specify |the user ID and password that the satellite will use to connect to the |satellite control database, as described in step 4.
|If synchronization credentials are not already stored at the satellite, the |Connect to Control Database window opens. You must use this window to |specify the user ID and password the satellite will use to connect to the |satellite control database.
|After you complete these configuration tasks, the Version 7.2 system |is ready to synchronize.
|For a Version 6 Enterprise Edition system to be used as a DB2 |control server, the system must be at FixPak 2 or higher.
|The sections that follow describe the tasks that you must perform to |upgrade a Version 6 Enterprise Edition system on Windows NT or AIX for use as |a DB2 control server. If you are using a Version 6 Control Center, also |perform the steps in 11.1.4, Upgrading a Version 6 Control Center and Satellite Administration Center to verify that you have the correct level of the Control |Center and the Satellite Administration Center to administer the satellite |environment.
|For a Version 6 DB2 Enterprise Edition system to be used as the DB2 control |server, it must be installed with the Control Server component, and DB2 |Enterprise Edition should be at the FixPak 2 service level, or higher. |Depending on whether the DB2 control server component is installed, and the |service level of DB2 Enterprise Edition, you will have to perform one of the |following tasks: |
|Use the information that follows to identify which of the two preceding |tasks you need to perform, and the steps that apply to your situation. |The following is a summary of the steps that you will perform. |
|The DB2 control server can only run on DB2 Enterprise Edition for Windows |NT and AIX. Continue with the instructions that are appropriate for |your platform: |
|Use the information in the sections that follow to determine the current |service level of your Version 6 DB2 Enterprise Edition system, and the steps |that you need to perform to update the system to the FixPak 2 service level or |higher. You will need to perform the steps of one or more of the |following sections: |
|If you have DB2 Enterprise Edition installed on Windows NT, perform the |following steps: |
Values of Key Fields in the db2level output | Your DB2 system is at: | ||
Release | Level | Informational Tokens | |
SQL06010 | 01010104 | db2_v6, n990616 | Version 6.1 base |
SQL06010 | 01020104 | DB2 V6.1.0.1, n990824, WR21136 | Version 6.1 plus FixPak 1 |
SQL06010 | 01030104 | DB2 V6.1.0.6, s991030, WR21163 or DB2 V6.1.0.9, s000101, WR21173 | Version 6.1 plus FixPak 2 |
|Using the information that you have gathered, find the row in the following |table that applies to your situation, and follow the steps that are required |to prepare your DB2 Enterprise Edition system to support the DB2 control |server at the FixPak 2 level or higher.
|Sections that follow the table provide instructions for performing the
|required steps. Consider checking off each step as you perform
|it. Only perform the steps that apply to your situation.
|
Control Server Component Installed | Service Level of DB2 Enterprise Edition System | Steps required to prepare your DB2 Enterprise Edition system |
---|---|---|
No | Version 6.1 base, or Version 6.1 plus FixPak 1, or Version 6.1 plus FixPak 2 or higher | Perform the following steps: |
Yes | Version 6.1 base, or Version 6.1 plus FixPak 1 | Perform the following steps: |
Yes | Version 6.1, plus FixPak 2 or higher | Perform the following step: |
|To install the Control Server component on Windows NT: |
|If the installation program does not start automatically, run the |setup command in the root of the CD to start the installation |process.
|When the installation process is complete and you have rebooted the system, |the satellite control database (SATCTLDB) that was created as part of the |Control Server installation must be cataloged in the DB2 instance if you want |to use the Control Center and Satellite Administration Center locally on the |system. To catalog the SATCTLDB database: |
|Issue the set command and check the value of db2instance. |If the value is not db2, issue the following command:
| set db2instance=db2
| db2 catalog local node db2ctlsv instance db2ctlsv
| db2 catalog database satctldb at node db2ctlsv
| db2 terminate
|To upgrade an existing Version 6 DB2 Enterprise Edition system on Windows |NT to FixPak 2 or higher, either: |
|http://www.ibm.com/software/data/db2/db2tech/version61.html
|Install the FixPak following the instructions in the readme.txt |file.
|To upgrade the SATCTLDB database on Windows NT |
| db2 connect to satctldb
| db2 select name from sysibm.systriggers where name='I_BATCHSTEP_TRGSCR'
|Record the number of rows that are returned.
| db2 connect reset
|If step 1d returned one row, the database is at the correct |level. In this situation, skip step 2, and continue at step 3. If zero (0) rows are |returned, the database is not at the correct level, and must be upgraded, as |described in step 2, before you can perform step 3. |
|Issue the set command and check the value of db2instance. |If the value is not db2ctlsv, issue the following command:
| set db2instance=db2ctlsv
| db2 drop database satctldb
| db2 -tf satctldb.ddl -z satctldb.log
| db2 terminate
|| db2 connect to satctldb
| db2 bind db2satcs.bnd
|
| db2 connect reset
|Use the information in the sections that follow to determine the current |service level of your Version 6 DB2 Enterprise Edition system, and the steps |that you need to perform to update the system to the FixPak 2 service level, |or higher. You will need to perform the steps of one or more of the |following sections: |
|If you have Version 6 DB2 Enterprise Edition installed on AIX, perform the |following steps: |
| lslpp -l | grep db2_06_01.ctsr
|If no data is returned, the Control Server component is not |installed.
Values of Key Fields in the db2level output | Your DB2 system is at: | ||
Release | Level | Informational Tokens | |
SQL06010 | 01010104 | db2_v6, n990616 | Version 6.1 base |
SQL06010 | 01020104 | DB2 V6.1.0.1, n990824, U465423 | Version 6.1 plus FixPak 1 |
SQL06010 | 01030104 | DB2 V6.1.0.6, s991030, U468276 or DB2 V6.1.0.9, s000101, U469453 | Version 6.1 plus FixPak 2 |
|Using the information that you have gathered, find the row in the following |table that applies to your situation, and follow the steps that are required |to prepare your Version 6 DB2 Enterprise Edition system to support the DB2 |control server at the FixPak 2 level.
|Sections that follow the table provide instructions for performing the
|required steps. Consider checking off each step as you perform
|it. Only perform the steps that apply to your situation.
|
Control Server Component Installed | Service Level of DB2 Enterprise Edition System | Steps required to prepare your DB2 Enterprise Edition system |
---|---|---|
No | Version 6.1 base, or Version 6.1 plus FixPak 1, or Version 6.1 plus FixPak 2 or higher | Perform the following steps: |
Yes | Version 6.1 base, or Version 6.1 plus FixPak 1 | Perform the following steps: |
Yes | Version 6.1, plus FixPak 2 or higher | Perform the following step: |
|To install the Control Server component on AIX |
| ./db2setup
|When the installation process is complete, create the DB2CTLSV instance and |the SATCTLDB database. To perform these tasks, follow the detailed |instructions in "Setting up the DB2 Control Server on AIX" in Chapter 13 of |the Administering Satellites Guide and Reference.
|To upgrade an existing DB2 Enterprise Edition system AIX to FixPak 2 or |higher, either: |
|http://www.ibm.com/software/data/db2/db2tech/version61.html
|Install the FixPak following the instructions in the FixPak readme |file.
|Ensure that you have updated the DB2CTLSV instance by running the |db2iupdt command as instructed in the FixPak readme file.
|To upgrade the SATCTLDB database on AIX: |
| db2 connect to satctldb
| db2 "select name from sysibm.systriggers where name='I_BATCHSTEP_TRGSCR'"
|Record the number of rows that are returned.
| db2 connect reset
|If step 1d returned one row, the database is at the correct |level. In this situation, skip step 2, and continue at step 3. If zero (0) rows are |returned, the database is not at the correct level, and must be upgraded, as |described in step 2, before you can perform step 3. |
| db2 drop database satctldb
| db2 -tf satctldb.ddl -z $HOME/satctldb.log
| db2 terminate
|| db2 connect to satctldb
| db2 bind db2satcs.bnd
|
| db2 connect reset
||To use a Version 6 Control Center and Satellite Administration Center with |a Version 6 DB2 control server and satellite control database (SATCTLDB) that |have been upgraded to FixPak 2 or higher, the tools must also be upgraded to |FixPak 2 or higher.
|If the Control Center and the Satellite Administration Center are running |on the same system as the DB2 control server, they were upgraded when the DB2 |Enterprise Edition system was upgraded to FixPak 2. However, if you run |these tools on another system, you must upgrade this system to the FixPak 2 |level or higher.
|To upgrade this system to FixPak 2 or higher: |
| http://www.ibm.com/software/data/db2/db2tech/version61.html
|Install the FixPak following the instructions in the readme file.