|The sections that follow describe how to set up Windows-based Version 7.2 |DB2 Personal Edition and DB2 Workgroup Edition systems so that they can be |used as fully functional satellites in a satellite environment. For information |about the terms and concepts used in the information that follows, refer to |the Administering Satellites Guide and Reference. You can find this book at the following URL: http://www.ibm.com/cgi-bin/db2www/data/db2/udb/winos2unix/support/v6pubs.d2w/en_main
|For Technotes that supplement the information in the Administering Satellites Guide and Reference, |refer to the following URL: http://www.ibm.com/cgi-bin/db2www/data/db2/udb/winos2unix/support/
|To set up either DB2 Personal Edition or DB2 Workgroup Edition as satellites, |you require the following: |
|The DB2 control server is a DB2 Enterprise Edition |system that runs on Windows NT or AIX, and has the Control Server component installed. |The DB2 Enterprise Edition system that you use must be at Version 6 with FixPak |2 or higher, or Version 7 at any FixPak level. |
|
|The DB2 control server instance is typically called DB2CTLSV, and the satellite |control database is called SATCTLDB. The DB2 control server instance and the |satellite control database are on the Enterprise Edition system, and, on Windows NT, |are automatically created when you install DB2 with the Control Server component. |If you install DB2 on AIX, see the Administering Satellites Guide and Reference for information |about creating the DB2 control server instance and the satellite control database.
|The Satellite Administration Center is the set of GUI tools that you use to |set up and administer the satellite environment. You access this set of tools |from the Control Center. For more information about the Satellite Administration Center and the satellite |environment, see the Administering Satellites Guide and Reference, and the online help that is available |from the Satellite Administration Center. If you are running a Version 6 Control Center, see 11.1.4, Upgrading a Version 6 Control Center and Satellite Administration Center.
|If you have not already used the Satellite Administration Center to set up the satellite |environment and to create the object that represents the new satellite in |the Satellite Administration Center, you should do so before installing the satellite. For more |information, see the description of how to set up and test a satellite environment |in the Administering Satellites Guide and Reference.
|When you install either DB2 Personal Edition or DB2 Workgroup Edition, |you do not have to select any special component to enable either system to |synchronize. If you intend to perform a response file installation, see Performing a Response File Installation for the keywords that you should specify when installing |the Version 7.2 system. If you are performing an interactive installation |of your Version 7.2 system, see 11.1.2, Configuring the Version 7.2 System for Synchronization after you finish installing |DB2 for values that you must set at the Version 7.2 system to enable it to |synchronize.
|If you are performing a response file installation of Version 7.2 DB2 Personal |Edition or DB2 Workgroup Edition, you can set the following keywords in the |response file.
|If you decide to not specify one or more of these keywords during the response |file installation, see 11.1.2, Configuring the Version 7.2 System for Synchronization for additional steps that you |must perform after installing DB2 to enable the Version 7.2 system to synchronize. |You can also use the instructions in this section if you want to change any |values that were specified during the response file installation.
|
|After you complete the response file installation, the Version 7.2 system |is ready to synchronize. You should issue the db2sync -t command on the satellite to verify that the values specified on the |satellite are correct, and that the satellite can connect to the satellite |control database.
|For additional information about performing a response file installation, |refer to the Administering Satellites Guide and Reference.
Note:
|In Version 6, the admin.userid and |the admin.password keywords could be specified during |a response file installation of DB2 Satellite Edition to specify the user |ID and password that would be used by the Remote Command Service. For 版本 |7.2 Personal Edition and Workgroup Edition, if you specify these keywords, |they are used for the DB2DAS00 instance on the Version 7.2 system. For a DB2 |Version 7.2 system, the Remote Command Service will use the user ID and password |that is used by the DB2 instance on the system. If you do not specify values |for db2.userid and db2.password, |the defaulting rule described above applies.
|If you install the Version 7.2 system interactively, several values must |be set on the DB2 Personal Edition or DB2 Workgroup Edition system after installing |DB2 before the system can synchronize.
|
|If you install DB2 Personal Edition or DB2 Workgroup Edition interactively, |the satellite ID is automatically set to the user ID that was used to install |DB2. If you want to use this user ID as the satellite ID, you do not have |to perform this step. For information about setting the satellite ID, see |the Administering Satellites Guide and Reference.
|If you install DB2 Personal Edition or DB2 Workgroup |Edition interactively, the application 版本 on the satellite is automatically |set to V1R0M00. If you want to use this value as the application 版本, |you do not have to perform this step.
|You can use the db2sync -g command on the satellite to view the current setting of the |application 版本. If you want to change this value, issue the db2sync -s command. You are prompted to provide a new value for the application |版本. For more information about setting the application 版本, see the Administering Satellites Guide and Reference.
|You can also use the db2sync -t command on the |satellite to open the DB2 Synchronizer application in test mode. If the SATCTLDB |database is not cataloged at the satellite when you issue the command, the |Catalog Control Database window opens. You can either use the DB2 discovery |feature that is available from the Catalog Control Database window to catalog |the DB2 control server and the SATCTLDB database, or you can type the hostname |and server name in this window. You will also be prompted to specify the user |ID and password that the satellite will use to connect to the satellite control |database, as described in step 4.
|If synchronization credentials are not |already stored at the satellite, the Connect to Control Database window opens. |You must use this window to specify the user ID and password the satellite |will use to connect to the satellite control database.
|After you complete these configuration tasks, the Version 7.2 system is |ready to synchronize.
|For a Version 6 Enterprise Edition system to be used as a |DB2 control server, the system must be at FixPak 2 or higher.
|The sections that follow describe the tasks that you must perform to upgrade |a Version 6 Enterprise Edition system on Windows NT or AIX for use as a DB2 control |server. If you are using a Version 6 Control Center, also perform the steps in 11.1.4, Upgrading a Version 6 Control Center and Satellite Administration Center to verify that you have the correct level of the Control Center and |the Satellite Administration Center to administer the satellite environment.
|For a Version 6 DB2 Enterprise Edition system to be used as the DB2 control |server, it must be installed with the Control Server component, and DB2 Enterprise |Edition should be at the FixPak 2 service level, or higher. Depending on whether |the DB2 control server component is installed, and the service level of DB2 |Enterprise Edition, you will have to perform one of the following tasks: |
|Use the information that follows to identify which of the two preceding |tasks you need to perform, and the steps that apply to your situation. The |following is a summary of the steps that you will perform. |
|The DB2 control server can only run on DB2 Enterprise Edition for Windows NT and |AIX. Continue with the instructions that are appropriate for your platform: |
|Use the information in the sections that follow to determine the current |service level of your Version 6 DB2 Enterprise Edition system, and the steps |that you need to perform to update the system to the FixPak 2 service level |or higher. You will need to perform the steps of one or more of the following |sections: |
|If you have DB2 Enterprise Edition installed on Windows NT, perform the following |steps: |
|
Values of Key Fields in the db2level output | Your DB2 system is at: | ||
Release | Level | Informational Tokens | |
SQL06010 | 01010104 | db2_v6, n990616 | Version 6.1 base |
SQL06010 | 01020104 | DB2 V6.1.0.1, n990824, WR21136 | Version 6.1 plus FixPak 1 |
SQL06010 | 01030104 | DB2 V6.1.0.6, s991030, WR21163 or DB2 V6.1.0.9, s000101, WR21173 | Version 6.1 plus FixPak 2 |
|
|Using the information that you have gathered, find the row in the following |table that applies to your situation, and follow the steps that are required |to prepare your DB2 Enterprise Edition system to support the DB2 control server |at the FixPak 2 level or higher.
|Sections that follow the table provide instructions for performing the |required steps. Consider checking off each step as you perform it. Only perform |the steps that apply to your situation.
|
Control Server Component Installed | Service Level of DB2 Enterprise Edition System | Steps required to prepare your DB2 Enterprise Edition system |
---|---|---|
No | Version 6.1 base, or Version 6.1 plus FixPak 1, or 版本 6.1 plus FixPak 2 or higher | Perform the following steps: |
Yes | Version 6.1 base, or Version 6.1 plus FixPak 1 | Perform the following steps: |
Yes | Version 6.1, plus FixPak 2 or higher | Perform the following step: |
|To install the Control Server component on Windows NT: |
|If the installation program does not start automatically, |run the setup command in the root of the CD to start the installation |process.
|When the installation process is complete and you have rebooted the system, |the satellite control database (SATCTLDB) that was created as part of the |Control Server installation must be cataloged in the DB2 instance if you want |to use the Control Center and Satellite Administration Center locally on the system. To catalog the SATCTLDB |database: |
|Issue the set command |and check the value of db2instance. If the value is not db2, issue |the following command:
| set db2instance=db2
| db2 catalog local node db2ctlsv instance db2ctlsv
| db2 catalog database satctldb at node db2ctlsv
| db2 terminate
|To upgrade an existing Version 6 DB2 Enterprise Edition system on Windows NT to |FixPak 2 or higher, either: |
|http://www.ibm.com/software/data/db2/db2tech/版本61.html
|Install the FixPak following the instructions in the readme.txt file.
|To upgrade the SATCTLDB database on Windows NT |
| db2 connect to satctldb
| db2 select name from sysibm.systriggers | where name='I_BATCHSTEP_TRGSCR'
|Record the number |of rows that are returned.
| db2 connect reset
|If step 1d returned one row, |the database is at the correct level. In this situation, skip step 2, and continue at step 3. If zero (0) rows |are returned, the database is not at the correct level, and must be upgraded, |as described in step 2, before you can perform step 3. |
|Issue the set command |and check the value of db2instance. If the value is not db2ctlsv, |issue the following command:
| set db2instance=db2ctlsv
| db2 drop database satctldb
| db2 -tf satctldb.ddl -z satctldb.log
| db2 terminate
|| db2 connect to satctldb
| db2 bind db2satcs.bnd
|| db2 connect reset
|Use the information in the sections that follow to determine the current |service level of your Version 6 DB2 Enterprise Edition system, and the steps |that you need to perform to update the system to the FixPak 2 service level, |or higher. You will need to perform the steps of one or more of the following |sections: |
|If you have Version 6 DB2 Enterprise Edition installed on AIX, perform |the following steps: |
| lslpp -l | grep db2_06_01.ctsr
|If no data is returned, |the Control Server component is not installed.
|
Values of Key Fields in the db2level output | Your DB2 system is at: | ||
Release | Level | Informational Tokens | |
SQL06010 | 01010104 | db2_v6, n990616 | Version 6.1 base |
SQL06010 | 01020104 | DB2 V6.1.0.1, n990824, U465423 | Version 6.1 plus FixPak 1 |
SQL06010 | 01030104 | DB2 V6.1.0.6, s991030, U468276 or DB2 V6.1.0.9, s000101, U469453 | Version 6.1 plus FixPak 2 |
|
|Using the information that you have gathered, find the row in the following |table that applies to your situation, and follow the steps that are required |to prepare your Version 6 DB2 Enterprise Edition system to support the DB2 |control server at the FixPak 2 level.
|Sections that follow the table provide instructions for performing the |required steps. Consider checking off each step as you perform it. Only perform |the steps that apply to your situation.
|
Control Server Component Installed | Service Level of DB2 Enterprise Edition System | Steps required to prepare your DB2 Enterprise Edition system |
---|---|---|
No | Version 6.1 base, or Version 6.1 plus FixPak 1, or 版本 6.1 plus FixPak 2 or higher | Perform the following steps: |
Yes | Version 6.1 base, or Version 6.1 plus FixPak 1 | Perform the following steps: |
Yes | Version 6.1, plus FixPak 2 or higher | Perform the following step: |
|To install the Control Server component on AIX |
| ./db2setup
|When the installation process is complete, create the DB2CTLSV instance |and the SATCTLDB database. To perform these tasks, follow the detailed instructions |in "Setting up the DB2 Control Server on AIX" in Chapter 13 of the Administering Satellites Guide and Reference.
|To upgrade an existing DB2 Enterprise Edition system AIX to FixPak 2 or |higher, either: |
|http://www.ibm.com/software/data/db2/db2tech/版本61.html
|Install the FixPak following the instructions in the FixPak readme |file.
|Ensure that you have updated the DB2CTLSV instance by running the db2iupdt command as instructed in the FixPak readme file.
|To upgrade the SATCTLDB database on AIX: |
| db2 connect to satctldb
| db2 "select name from sysibm.systriggers | where name='I_BATCHSTEP_TRGSCR'"
|Record the number |of rows that are returned.
| db2 connect reset
|If step 1d returned one row, |the database is at the correct level. In this situation, skip step 2, and continue at step 3. If zero (0) rows |are returned, the database is not at the correct level, and must be upgraded, |as described in step 2, before you can perform step 3. |
| db2 drop database satctldb
| db2 -tf satctldb.ddl -z $HOME/satctldb.log
| db2 terminate
|| db2 connect to satctldb
| db2 bind db2satcs.bnd
|| db2 connect reset
||To use a Version 6 Control Center and Satellite Administration Center with a Version 6 DB2 control |server and satellite control database (SATCTLDB) that have been upgraded to |FixPak 2 or higher, the tools must also be upgraded to FixPak 2 or higher.
|If the Control Center and the Satellite Administration Center are running on the same system as the |DB2 control server, they were upgraded when the DB2 Enterprise Edition system |was upgraded to FixPak 2. However, if you run these tools on another system, |you must upgrade this system to the FixPak 2 level or higher.
|To upgrade this system to FixPak 2 or higher: |
| http://www.ibm.com/software/data/db2/db2tech/版本61.html
|Install the FixPak following the instructions in the readme file.