This is a 3130 Configuration Tool. This tool will aid you in the configuration of the 
attachment you are using for the 3130 printer. The 3130 Printer micro code must be 10.21.4 
or higher.  	

 -- This version is for Windows 95 and Windows NT 3.5.1 or higher --	
	      
To install Program

 1. Start Windows 95 or Windows NT	
 2. Insert the configuration diskette in drive A:		
 3. From start, select Run.	 	
 4. Type a:setup and press enter		
 5. Follow instructions on display.	
 
This will put a 3130 exec under programs. To run the program, just click on the 3130 Icon.	
The program has context sensitive help, just place the cursor over an item and press F1.
  
 ***** YOU MUST HAVE A DISKETTE IN THE A DRIVE ***************

  The fast Path will allow you to See and Enter all the information per attachment in one       
  panel.

  The Step by Step is a more guided approach.

  Pressing the Save/Continue button will save the information to diskette.

  After you exit the Configuration Tool, remove the diskette from the PC and 		   
  put in the Diskette drive on the 3130 printer.  Once the printer is powered on and 
  in the ready state, Press the Menu key and do the following:
 
Select:
      
         Service
           Disk Operations
             Update config from Diskette 
          
This will download the configuration form the diskette to the 3130 printer. At the end it 
will ask you to shutdown and restart the printer for the changes to take effect.