**** START OF SPECIFICATIONS ***************************************** 00010000 * * 00020000 **** MODULE NAME = APSGCUS1 * 00030000 * * 00040000 * COMP(APS) PROD(PSF) : RELEASE 3.1.0 * 00050000 * * 00060000 **** DESCRIPTIVE NAME = PSF FOR OS/390 CUSTOMIZATION UPDATES * 00070000 * * 00080000 **** STATUS = VERSION 3, RELEASE 1, LEVEL 0 * 00090000 * * 00100000 **** FUNCTION = * 00110000 * * 00120000 * THIS MODULE CONTAINS ALL OF THE UPDATES TO THE PSF FOR * 00130000 * OS/390 CUSTOMIZATION SINCE THE LAST PUBLISHED VERSION * 00140000 * OF THE MANUAL. * 00150000 * * 00160000 * THE UPDATES ARE PUT IN THE SAME FORMAT AS THEY WERE BEING * 00170000 * PUT IN THE DOC ++HOLDS. * 00180000 * * 00190000 * EACH TIME A NEW APAR HAS UPDATES THE CHANGE ACTIVITY WILL * 00200000 * BE UPDATED AND A NEW SECTION WILL BE ADDED TO THE END OF * 00210000 * THIS MODULE PRECEDED BY A LINE THAT DENOTES THE APAR NUMBER. * 00220000 * * 00230000 * DO NOT GO PAST COLUMN 64 WITH YOUR DOC CHANGES. THE END OF * 00240000 * THE DASHED LINES WITH YOUR APAR NUMBER IN THE TEXT INDICATE * 00250000 * COLUMN 64. * 00260000 * * 00270000 **** RESTRICTIONS * 00280000 * * 00290000 * DO NOT EDIT OR UPDATE THIS FILE ON SAMPLIB AS THE * 00300000 * NEXT APAR THAT CHANGES THIS MODULE WILL DO A TOTAL REPLACE * 00310000 * OF IT THUS OVERLAYING YOUR CHANGES. IF YOU WISH TO MAKE * 00320000 * CHANGES TO THIS MODULE THEN DO IT IN YOUR OWN COPY OF THIS * 00330000 * MODULE. * 00340000 * * 00350000 * *** CHANGE ACTIVITY = * 00360000 * $01=OW40075, HPRF310,990709,BDKUELJ: Clarify CONNINTV * 00370000 * $02=OW39224, HPRF310,990525,BDKUMLC: FICON bridge support * 00380000 * $03=0W40173, HPRF310,990726,BDKUELJ: Don't RELDS on repos * 00390000 * $04=OW40455, HPRF310,990805,BDKULD : APSRCF30 - DBCS warning * 00400000 * $05=OW40737, HPRF310,990815,BDKURLD: Suppress copy marks * 00410000 * $06=0W40839, HPRF310,990831,BDKURLD: Provide data set id to exits * 00420000 * $07=OW37851, HPRF310,990901,BDKUELJ: Printer inventory * 00430000 * $08=OW41213, HPRF310,991005,BDKUELJ: Reposition hangs with JES3 * 00440000 * $08=OW41385, HPRF310,991012,BDKUELJ: XTP7RSV1 * 00450000 * $09=OW42106, HPRF310,991104,BLDCWJ: loop when small page * 00460000 * length set at printer * 00470000 * $10=OW42719, HPRF310,000111,BLDCWJ: APS502I issued * 00480000 * $11=OW42117, HPRF310,000114,BLDDDA: Add sample exit APSUX15M * 00490000 * $12=OW43463, HPRF310,000302,BDKURLD: Change XTP6PROC * 00500000 * $13=OW41991, HPRF310,000321,BDKULMM: Enable inline capture with * 00510000 * WPM * 00520000 * $14=OW44660, HPRF310,000524,BDKURLD: Indicate simplex/duplex * 00530000 * $15=OW47073, HPRF310,001120,BDKUELJ: Support COPYMARK=NONE * 00540000 * $16=OW45477 ,HPRF310,000719,BLDCWJ: New sheet eject in CSE * 00550000 * $17=OW47253, HPRF310,001130,BDKURLD: Separate copy marks and * 00560000 * jogging * 00570000 * $18=OW48960, HPRF310,010503,BDKULMM: Abend024 RC8A9 after using a * 00580000 * checkpoint from another * 00590000 * release of PSF * 00600000 * $19=OW53353, HPRF310,020225,BDKULMM: To force supersedes * 00610000 * $20=OW53830, HPRF310,020403,BDKUMLC: No NPRO with DISCINTV * 00620000 * $21=OW55773, HPRF310,020805,BDKUPG: Abend 024 RC 00D8 when * 00630000 * specifying a formdef or * 00640000 * pagedef of 7 or 8 characters * 00650000 * $22=OW56680, HPRF310,021111,BDKULD: New resident font table * 00410000 * * 00660000 **** END OF SPECIFICATIONS ******************************************* 00670000 00680000 All of the following changes are for the PSF for 00690000 OS/390 Customization (S544-5622-01). 00700000 00710000 -----------CHANGES FOR OW40075---------------------------------- 00720000 00730000 1. On page 58 in Table 2 under Connect Interval, 00740000 replace the sentence which starts 00750000 For SNA, the connect interval... 00760000 with 00770000 For SNA, the connect interval is set when a session request 00780000 is queued after a busy or a not available condition has 00790000 occurred. If a VTAM condition such as LU NOT ACTIVE occurs, 00800000 PSF retries 16 times and then terminates without using the 00810000 connect interval. 00820000 00830000 -----------CHANGES FOR OW39224---------------------------------- 00840000 00850000 1. On page 6 under the section "Using ESCON Channel-Attached Printers" 00860000 change the first sentence in the second paragraph to read, "With 00870000 an ESCON channel card in the printer, you can attach the printer to 00880000 an ESCON channel or attach it to a FICON Bridge Card in an ESCON 00890000 Director. For more information about the FICON Bridge Card, refer 00900000 to the appropriate ESCON Director manual." 00910000 00920000 2. On page 7 change the second sentence in the fourth paragraph 00930000 to read, "When adding an ESCON channel-attachable printer, you 00940000 can attach it to an ESCON channel(type=CNC) or to a FICON Bridge 00950000 Card(type=FCV) in an ESCON Director. For more information about 00960000 the FICON Bridge Card, refer to the appropriate ESCON Director 00970000 manual." 00980000 00990000 3. On page 90 under the section "Sharing ESCON Channel-Attached 01000000 Printers" replace the first sentence of the first paragraph with 01010000 the following two sentences: "An ESCON channel-attachable printer 01020000 can be shared among multiple PSF hosts, but it can only be in 01030000 use by one PSF at a time. The ESCON channel-attachable printer 01040000 can be natively attached to an ESCON channel or attached to a 01050000 FICON Bridge Card in an ESCON Director. For more information about 01060000 the FICON Bridge Card, refer to the appropriate ESCON Director 01070000 manual." 01080000 01090000 4. On page 144 under the section "Host-Connected, Channel-Attached 01100000 Printer" change the first sentence of the third paragraph to read, 01110000 "With the ESCON channel card installed in a printer, the printer 01120000 can be attached to the host with an ESCON channel or indirectly 01130000 to the host with a FICON Bridge Card in an ESCON Director, which 01140000 can send and receive data faster than a parallel S/370 channel." 01150000 01160000 5. On page 144 under the section "Host-Connected, Channel-Attached 01170000 Printer" add the following sentence after the last sentence 01180000 of the third paragraph, "For more information about the 01190000 FICON Bridge Card, refer to the appropriate ESCON Director manual." 01200000 01210000 6. On page 297 in the first section at the top of the page, add 01220000 the following sentence after the first sentence in the first 01230000 paragraph, "The ESCON-attached microfilm device can be natively 01240000 attached to an ESCON channel or attached to a FICON Bridge 01250000 Card in an ESCON Director. For more information about the FICON 01260000 Bridge Card, refer to the appropriate ESCON Director manual." 01270000 01280000 7. On page 297 under the second section "Defining the Microfilm 01290000 Device to OS/390 or MVS", add the following sentence after the 01300000 first sentence in the paragraph, "The ESCON-attached 01310000 microfilm device can be natively attached to an ESCON channel 01320000 or attached to a FICON Bridge Card in an ESCON Director. 01330000 For more information about the FICON Bridge Card, refer to the 01340000 appropriate ESCON Director manual." 01350000 01360000 -----------CHANGES FOR OW40173---------------------------------- 01370000 01380000 1. On page 279 under Normal PSF Recovery, add a new sub-section 01390000 at the end of the page 01400000 01410000 Disposition of Spool Data Sets During Repositioning 01420000 01430000 PSF will retain the spool data sets it has obtained from JES 01440000 while it is repositioning to handle an exception reported by 01450000 the printer, such as a paper jam or a page adjust. This 01460000 prevents the reordering of print data sets as a result of 01470000 repositioning. This is a change from earlier PSF design and 01480000 can be overridden by APSUX07 on the INIT call by setting 01490000 XTP7RDSR on. 01500000 01510000 2. On page 348 add the following after XTP7CINR in Figure 72. 01520000 01530000 .... .1.. XTP7RDSR RELEASE DATA SETS WHEN 01540000 REPOSITIONING 01550000 (VALID FOR INITIALIZATION 01560000 "XTP7INIT") 01570000 0 = DO NOT RELEASE DATA 01580000 SETS WHEN REPOSITIONING 01590000 1 = RELEASE DATA SETS WHEN 01600000 REPOSITIONING 01610000 01620000 3. On page 357 add the following after XTP7CINR. 01630000 01640000 XTP7RDSR Valid only on the INIT call. PSF initially sets 01650000 this field to B'0' to indicate that PSF will not 01660000 release spool data sets during repositioning. 01670000 IF APSUX07 sets this flag to B'1', PSF will 01680000 release data sets during repositioning and then 01690000 reacquire them after printing restarts. See 01700000 "Disposition of Spool Data Sets During 01710000 Repositioning" on page 279. 01720000 01730000 01740000 4. On page 372 in Table 29 add XTP7RDSR after XTP7CINR with 01750000 an 'IO' in the INIT column. 01760000 01770000 -----------CHANGES FOR OW40455---------------------------------- 01780000 01790000 1. On Page 377, Appendix H. Font Conversion Program, 01800000 after the second paragraph, add this note. 01810000 01820000 NOTE: APSRCF30 converts 240 pel single byte raster fonts 01830000 to 300 pel raster fonts. It cannot convert 240 pel double 01840000 byte raster fonts. Higher resolution double byte fonts are 01850000 available with double byte outline fonts in the AFP Font 01860000 Collection, Version 2. APSRCF30 converts a 240 pel single 01870000 byte raster font to a close approximation of the font at 01880000 300 pel resolution. However, IBM does not warrant the 01890000 quality of the resulting character pattern when using this 01900000 utility. 01910000 01920000 -----------CHANGES FOR OW40737---------------------------------- 01930000 01940000 1. On page 123 under "Copy Marking and Offset Stacking" change 01950000 the 2nd sentence that begins "Copy marking and offset stacking 01960000 are controlled......" to read as follows. 01970000 01980000 Copy marking and offset stacking are controlled by the following 01990000 JES initialization parameters. Copy marking can be suppressed 02000000 by APSUX07. 02010000 02020000 2. On page 123 after the bulleted list, add the following new 02030000 sub-section. 02040000 02050000 Suppressing Copy Marks 02060000 02070000 If no copy marks are desired, they can be suppressed by 02080000 setting XTP7SUCM in APSUX07. See XTP7SUCM on page 357 for 02090000 more details. 02100000 02110000 3. On page 255 add the following bulleted item to the list at 02120000 the bottom of the page. 02130000 02140000 o Suppress the printing of copy marks. See XTP7SUCM on 02150000 page 357. 02160000 02170000 4. On page 348 add the following after XTP7RDSR (added by 02180000 OW40173) in Figure 72. 02190000 02200000 .... ..1. XTP7SUCM SUPPRESS COPY MARKS 02210000 (VALID FOR INITIALIZATION 02220000 "XTP7INIT" AND BDSC 02230000 "XTP7BDS") 02240000 0 = DO NOT SUPPRESS COPY 02250000 MARKS 02260000 1 = SUPPRESS COPY MARKS 02270000 02280000 5. On page 358 add the following after XTP7RDSR (added by OW40173). 02290000 02300000 XTP7SUCM Valid only on the INIT and BDSC calls. PSF initially 02310000 sets this field to B'0' to indicate that PSF will 02320000 tell the printer to print copy marks as specified 02330000 by the JES initialization parameters. 02340000 IF APSUX07 sets this flag to B'1', PSF will tell 02350000 the printer to suppress copy marks. 02360000 02370000 6. On page 372 in Table 29 add XTP7SUCM after XTP7RDSR (added 02380000 by OW40173) with an 'IO' in the INIT and BDSC columns. 02390000 02400000 -----------CHANGES FOR OW40839---------------------------------- 02410000 02420000 1. On page 224 in Figure 56 under ECEDSID, remove the line that 02430000 says "(in Download for OS/390 only)." 02440000 02450000 -----------CHANGES FOR OW37851---------------------------------- 02460000 02470000 1. On page 75 in table 2, add the following entry 02480000 02490000 ------------------------------------------------------------- 02500000 | ISPF Panel | PIDU | 02510000 |-----------------------------|-----------------------------| 02520000 |Release DS when repositioning|Release-DS-when-repositioning| 02530000 | | | 02540000 | Values: | Values: | 02550000 | / = Yes | yes | 02560000 | blank = No | no | 02570000 ------------------------------------------------------------- 02580000 ... 02590000 ------------------------------------------------------------- 02600000 | Equivalent Parameter | Description | 02610000 |----------------------|------------------------------------| 02620000 | XTP7RDSR | Specifies whether PSF is to release| 02630000 | | spool data sets it has obtained | 02640000 | | from JES when it is repositioning | 02650000 | | to handle an exception reported by | 02660000 | | the printer, such as a paper jam or| 02670000 | | a page adjust. Releasing data sets | 02680000 | | may cause the print data sets to | 02690000 | | be reordered when printing resumes.| 02700000 | | The default is NO, which indicates | 02710000 | | that PSF will not release data sets| 02720000 | | when repositioning. See | 02730000 | | "Disposition of Spool Data Sets | 02740000 | | During Repositioning" on page 279. | 02750000 ------------------------------------------------------------- 02760000 Note: This parameter was added to the Infoprint Server for 02770000 OS/390 Printer Inventory with APAR OW40904. 02780000 02790000 2. On page 79 in table 2, add the following entry 02800000 02810000 ------------------------------------------------------------- 02820000 | ISPF Panel | PIDU | 02830000 |-----------------------------|-----------------------------| 02840000 |Suppress copy marks |Suppress-copy-marks | 02850000 | | | 02860000 | Values: | Values: | 02870000 | / = Yes | yes | 02880000 | blank = No | no | 02890000 ------------------------------------------------------------- 02900000 ... 02910000 ------------------------------------------------------------- 02920000 | Equivalent Parameter | Description | 02930000 |----------------------|------------------------------------| 02940000 | XTP7SUCM | Specifies whether PSF is to tell | 02950000 | | the printer to suppress copy marks.| 02960000 | | See "Suppressing Copy Marks" on | 02970000 | | page 123 for more information. | 02980000 ------------------------------------------------------------- 02990000 Note: This parameter was added to the Infoprint Server for 03000000 OS/390 Printer Inventory with APAR OW40904. 03010000 03020000 3. On page 123 under "Copy Marking and Offset Stacking" change 03030000 the 2nd paragraph that begins "Copy marking and offset stacking 03040000 are controlled......" to read as follows. 03050000 03060000 Copy marking and offset stacking are controlled by the following 03070000 JES initialization parameters. Copy marking can be suppressed 03080000 by specifying the Suppress copy marks parameter in the printer 03090000 inventory or by specifying XTP7SUCM in APSUX07. 03100000 03110000 4. On page 123 replace the section "Suppressing Copy Marks", 03120000 with 03130000 03140000 Suppressing Copy Marks 03150000 03160000 If no copy marks are desired, they can be suppressed by 03170000 specifying the Suppress copy marks parameter in the 03180000 Printer Inventory (See table 2) or by setting XTP7SUCM 03190000 in APSUX07 (See XTP7SUCM on page 357). 03200000 03210000 5. On page 254 in table 20, add the following entries 03220000 03230000 ------------------------------------------------------------- 03240000 | XTP7RDSR | Release DS when | Specifies whether PSF is to | 03250000 | | repositioning | release spool data sets it | 03260000 | | | has obtained from JES when | 03270000 | | | it is repositioning to handle| 03280000 | | | an exception reported by the | 03290000 | | | printer. See "Disposition of | 03300000 | | | Spool Data Sets During | 03310000 | | | Repositioning" on page 279 | 03320000 | | | for more information. | 03330000 |-----------------------------------------------------------| 03340000 | XTP7SUCM | Suppress copy | Specifies whether PSF is to | 03350000 | | marks | tell the printer to suppress | 03360000 | | | copy marks. See "Suppressing | 03370000 | | | Copy Marks" on page 123 for | 03380000 | | | more information. | 03390000 ------------------------------------------------------------- 03400000 03410000 6. On page 279 under "Disposition of Spool Data Sets During 03420000 Repositioning" (added with OW40173), change the last 03430000 sentence to 03440000 03450000 This is a change from earlier PSF design and can be 03460000 overridden by the Release data sets during repositioning 03470000 parameter in the Printer Inventory or by setting XTP7RDSR 03480000 on in the INIT call of APSUX07. 03490000 03500000 7. On page 357 change the paragraph added for OW40173 to 03510000 03520000 XTP7RDSR This option can only be set by the Printer 03530000 Inventory or on the INIT call. PSF initially sets 03540000 this field to B'0' to indicate that PSF will not 03550000 release spool data sets during repositioning. 03560000 IF APSUX07 sets this flag to B'1', PSF will 03570000 release data sets during repositioning and then 03580000 reacquire them after printing restarts. See 03590000 "Disposition of Spool Data Sets During 03600000 Repositioning" on page 279. For information about 03610000 specifying this option in the Printer Inventory, 03620000 See Release DS when repositioning in Table 2 on 03630000 page 75. 03640000 03650000 8. On page 357 change the paragraph added for OW40737 to 03660000 03670000 XTP7SUCM This option can only be set by the Printer 03680000 Inventory or on the INIT or BDSC calls. PSF 03690000 initially sets this field to B'0' to indicate 03700000 that PSF will tell the printer to print copy 03710000 marks as specified by the JES initialization 03720000 parameters. If APSUX07 sets this flag to B'1', 03730000 PSF will tell the printer to suppress copy marks. 03740000 For information about specifying this option in 03750000 the Printer Inventory, See Suppress copy marks 03760000 in Table 2 on page 79. 03770000 03780000 -----------CHANGES FOR OW41213---------------------------------- 03790000 03800000 1. On page 279, add the following note after the section 03810000 "Disposition of Spool Data Sets During Repositioning" 03820000 (added by OW40173) 03830000 03840000 Note: JES3 had a restriction prior to OS/390 2.6 which 03850000 required that PSF release data sets before repositioning. 03860000 When PSF is running with JES3 on a system prior to OS/390 2.6, 03870000 data sets will always be released when repositioning. 03880000 In this case, the Release data sets during repositioning 03890000 option from the Printer Inventory and the XTP7RDSR flag from 03900000 APSUX07 are ignored. 03910000 03920000 -----------CHANGES FOR OW41385---------------------------------- 03930000 03940000 1. On page 348 add the following after XTP7SUCM (added by 03950000 OW40737) in Figure 69. 03960000 03970000 .... ...1 XTP7RSV1 RESERVED - DO NOT USE 03980000 03990000 7. On page 358 add the following after XTP7SUCM (added by OW40737). 04000000 04010000 XTP7RSV1 Reserved - Do not use 04020000 04030000 04040000 -----------CHANGES FOR OW42106---------------------------------- 04050000 04060000 1. On page 112 under OUTPUT, add the following after the existing 04070000 description. 04080000 04090000 The keywords honored on OUTPUT statements in the PSF startup 04100000 procedure are shown in the following table. All other 04110000 keywords are ignored on OUTPUT statements in the PSF startup 04120000 procedure. 04130000 04140000 Keyword Job Header Job Trailer DS Header Message Data Set 04150000 --------------------------------------------------------------- 04160000 CHARS honored honored honored honored 04170000 COLORMAP honored honored honored honored 04180000 COMSETUP honored honored honored honored 04190000 COPIES honored ignored ignored ignored 04200000 FORMDEF honored honored honored honored 04210000 PAGEDEF honored honored honored honored 04220000 PIMSG ignored ignored ignored honored 04230000 RESFMT honored honored honored honored 04240000 TRC honored honored honored honored 04250000 04260000 -----------CHANGES FOR OW42719---------------------------------- 04270000 04280000 Replace information in table 3 with the following: 04290000 04300000 pg 85 04310000 04320000 OVLYDD Identifies the DD statement that specifies the default 04330000 (required/ overlay libraries. 04340000 optional o Optional if no attempt to print an overlay 04350000 from the system overlay library. 04360000 o Required if OVLY240 or OVLY300 is specified. 04370000 The default library is used when print data 04380000 does not have a resolution given. 04390000 04400000 Syntax: OVLYDD=*.label 04410000 04420000 pg 86 04430000 04440000 PSEGDD Identifies the DD statement that specifies the default 04450000 (required/ page segment libraries. In addition to page 04460000 optional) segments, the page segment library may contain 04470000 IOCA, GOCA, and BCOCA resources. 04480000 o Optional if no attempt to print a page segment 04490000 from the system page segment library. 04500000 o Required if PSEG240 or PSEG300 is specified. 04510000 The default library is used when print data 04520000 does not have a resolution given. 04530000 04540000 Syntax: PSEGDD=*.label 04550000 04560000 -----------CHANGES FOR OW42117---------------------------------- 04570000 04580000 1. On page 218, in section "Changing Exit Routines" of chapter 04590000 "Using Installation Exits", add the following new entry to 04600000 the table "PSF Exit Routines in SYS1.SAMPLIB": 04610000 04620000 APSUX15M Sample source routine that provides an 04630000 indication of whether the data set is the 04640000 "first", "next", "last", or "only" dataset 04650000 in the output group. Download for OS/390 will 04660000 send the information via the -opa parameter to 04670000 the AIX server daemon. This member is only 04680000 installed in SYS1.SAMPLIB if Download for 04690000 OS/390 is present. 04700000 04710000 2. On page 222 in Figure 55 (Part 1 of 2) replace ECALSTDS and its 04720000 description and the following reserved field of ..11 1111 with 04730000 the following. 04740000 04750000 ******************************************************************** 04760000 04770000 Following is the combination of the ECALSTDS and ECAFSTDS 04780000 flags and their meaning 04790000 04800000 00 = Not first or last dataset (middle dataset) 04810000 01 = First dataset 04820000 10 = Last dataset 04830000 11 = Only dataset 04840000 04850000 ******************************************************************** 04860000 .1.. .... ECALSTDS Last dataset 04870000 0 = Not the last dataset 04880000 of the job 04890000 1 = Last dataset of the job 04900000 ..1. .... ECAFSTDS First dataset 04910000 0 = Not the first dataset 04920000 of the job 04930000 1 = First dataset of the job 04940000 ...1 1111 * Reserved 04950000 04960000 -----------CHANGES FOR OW43463---------------------------------- 04970000 04980000 1. On page 220 in Figure 54 change the definition of XTP6PROC 04990000 to read as follows. 05000000 05010000 FSA identifier: 05020000 The label of the PRINTDEV statement. 05030000 05040000 2. On page 244 near the top of the page change the definition 05050000 of XTP6PROC to read as follows. 05060000 05070000 XTP6PROC FSA identifier: 05080000 The label of the PRINTDEV statement. 05090000 05100000 -----------CHANGES FOR OW41991---------------------------------- 05110000 1. pg 4 Under the heading 'Printers Attached through an 05120000 Intermediate Device' add a 4th bullet to the list: 05130000 05140000 o Workstation Print Manager (WPM) (available only in Japan) 05150000 05160000 2. pg 4 After the last paragraph on the page add a new paragraph: 05170000 05180000 With WPM you can store (cache) PSF resources in the fixed-disk 05190000 storage of the personal computer; the stored resources can 05200000 then be used by a printer that is attached to the intermediate 05210000 device. PSF will tell WPM not to store resources found in 05220000 user libraries or inline resources. Exit 07 or the Printer 05230000 Inventory can be used to 05240000 allow capture of inline resources. Refer to Capture inline 05250000 resources in Table 2 on page 52 for more information. 05260000 05270000 3. pg 54 Under the description for XTP7CINR change all occurrences 05280000 of "DPF" to "DPF or WPM". 05290000 05300000 4. pg 168 in the second bullet replace "DPF" with "DPF or WPM". 05310000 05320000 5. pg 177 In the last bullet replace "DPF" with "DPF or WPM". 05330000 05340000 6. pg 182 In the third bullet under APSRMARK Considerations 05350000 replace "DPF" with "DPF or WPM" 05360000 05370000 7. pg 191 In the second sentence in the third paragraph 05380000 under "Marking Fonts for Font Capture" replace "DPF" with 05390000 "DPF or WPM". 05400000 05410000 8. pg 223, Figure 56 at offset 83 replace the line with 05420000 description 'Reserved' with the following two new lines: 05430000 05440000 .... 1... ECEWPM WPM is attached. 05450000 .... .111 * Reserved 05460000 05470000 9. pg 253, Table 20 In the description for XTP7CINR replace "DPF" 05480000 with "DPF or WPM". 05490000 05500000 10. pg 256 in the last bullet at the top of the page 05510000 replace "DPF" with "DPF or WPM". 05520000 05530000 11. On page 348 in Figure 72 in the comments for bit XTP7CINR 05540000 replace "DPF" with "DPF or WPM" 05550000 05560000 12. On page 357 in the description of flag XTP7CINR replace 05570000 "DPF" with "DPF or WPM". 05580000 05590000 13. On pg 426 add a new glossary entry under W: 05600000 WPM. Workstation Print Manager 05610000 05620000 14. On pg 464 add a new index entry for "W" with the following item: 05630000 Workstation Print Manager (WPM) 4, 54, 168, 177, 182, 191, 223 05640000 253, 256, 348, 357 05650000 05660000 -----------CHANGES FOR OW44660---------------------------------- 05670000 05680000 1. On page 222 in the top half of Figure 55, change 05690000 "...1 1111 * Reserved" (from apar OW42117) to the 05700000 following. 05710000 05720000 ...1 .... ECACUTSH Cutsheet Output 05730000 0 = Not cutsheet output 05740000 1 = Cutsheet output - Either 05750000 cutsheet printer or 05760000 continuous forms printer 05770000 with BTS 05780000 .... 1... ECADUPEN Duplex Enabled 05790000 0 = Duplex not enabled 05800000 1 = Duplex enabled - Duplex 05810000 available from at least 05820000 one media source 05830000 .... .111 * Reserved 05840000 05850000 -----------CHANGES FOR OW47073---------------------------------- 05860000 05870000 1. Under Parameters for the JES2 Initialization Statement, 05880000 on page 96, 05890000 replace 05900000 COPYMARK=DATASET|JOB|CONSTANT 05910000 with 05920000 COPYMARK=DATASET|JOB|CONSTANT|NONE 05930000 and add after the description of CONSTANT 05940000 NONE No copy marks are used and no offset stacking is done. 05950000 05960000 2. Under Copy Marking and Offset Stacking on 05970000 on page 123, 05980000 replace the first paragraph under the first bullet with 05990000 For JES2, the COPYMARK parameter of the PRTnnnn statememt 06000000 specifies how the copy mark is to be used: Incremented at 06010000 the end of each data set or copy of a data set or at the 06020000 end of each job, or no copy mark is to be used. 06030000 06040000 3. Under Suppressing Copy Marks (added by OW40737) 06050000 on page 123, 06060000 replace 06070000 If you do not want to use copy marks, you can suppress .... 06080000 with 06090000 If you do not want to use copy marks, you can suppress them 06100000 in one of these ways: 06110000 - Specify COPYMARK=NONE on the JES2 initialization statement 06120000 (see page 96). 06130000 - Specify Suppress copy marks = YES in the Printer Inventory 06140000 (see page 79). 06150000 - Set XTP7SUCM in Exit 7 (see page 359). 06160000 06170000 -----------CHANGES FOR OW45477---------------------------------- 06180000 06190000 1. On page 59 in table 2, add the following entry 06200000 06210000 ------------------------------------------------------------- 06220000 | ISPF Panel | PIDU | 06230000 |-----------------------------|-----------------------------| 06240000 |CSE sheet eject |cse-sheet-eject | 06250000 | | | 06260000 | Values: | Values: | 06270000 | / = Yes | yes | 06280000 | blank = No | no | 06290000 ------------------------------------------------------------- 06300000 ... 06310000 ------------------------------------------------------------- 06320000 | Equivalent Parameter | Description | 06330000 |----------------------|------------------------------------| 06340000 | XTP7NSF | Specifies whether PSF tells | 06350000 | | the printer to eject to a new | 06360000 | | sheet on a data set boundary when | 06370000 | | printing cut-sheet emulation (CSE) | 06380000 | | mode. | 06390000 | | See "Things to Consider When Using | 06400000 | | Cut-Sheet Emulation" on page 156 | 06410000 | | and XTP7NSF on page 357 for more | 06420000 | | information. | 06430000 ------------------------------------------------------------- 06440000 06450000 Note: This parameter was added to the Infoprint Server for 06460000 OS/390 Printer Inventory with APAR OW47612. 06470000 06480000 06490000 2. In section "Things to Consider When Using 06500000 Cut-Sheet Emulation" on page 156, add new paragraph after 06510000 last paragraph in the 1st bullet. 06520000 06530000 In addition to the preceding, sheet eject can now be 06540000 requested for CSE via the Printer Inventory CSE-sheet-eject 06550000 parameter or Exit 7 new sheet flag (XTP7NSF). When this 06560000 option is requested, each job and each data set within a 06570000 job causes an eject to a new sheet. The eject to a new sheet 06580000 is done as follows: 06590000 - If only a job header is requested, before the job header and 06600000 before the second and subsequent data sets if any. 06610000 - If a job header and dataset header are requested, before the 06620000 job header and before the second and subsequent dataset set 06630000 headers for the data sets if any. 06640000 - If no headers, before each data set. 06650000 06660000 In addition, if offset stacking is specified in a copy group 06670000 and that copy group is invoked and offset stacking is being 06680000 done, an eject to a new sheet occurs. The next page is 06690000 the first page on this new sheet. 06700000 See "Copy Marking and Offset Stacking" on Page 122 for 06710000 more detail. 06720000 06730000 3. On page 253 add after XTP7WIDE the following to 06740000 Table 20 "APSUX07 Options Specified in the Printer Inventory". 06750000 06760000 XTP7NSF CSE sheet eject Controls sheet eject in CSE mode. 06770000 See "Things to Consider When Using 06780000 Cut-Sheet Emulation" on page 156. 06790000 06800000 4. On page 348 in Figure 72 add the following 06810000 after the description of XTP7APSF. 06820000 06830000 .1.. .... XTP7NSF CSE NEW SHEET FLAG 06840000 (VALID ONLY ON 06850000 INITIALIZATION CALL 06860000 "XTP7INIT") 06870000 0 = In CSE mode, JOG(AOS) with 06880000 offset stacking being done 06890000 or start of a data set 06900000 causes skip to next 06910000 front side partition. 06920000 1 = In CSE mode, JOG(AOS) with 06930000 offset stacking being done 06940000 or start of a data set 06950000 causes skip to new sheet. 06960000 06970000 5. On page 357 add the following after the definition of 06980000 XTP7APSF. 06990000 07000000 07010000 XTP7NSF This option can only be set by the 07020000 Printer Inventory or during the INIT call. 07030000 PSF initially sets this field to B'0' 07040000 to indicate that in CSE mode an AOS 07050000 with offset stacking being done or 07060000 the start of a data set causes a 07070000 skip to the next front side partition. 07080000 If Exit 7 sets this flag 07090000 to B'1', then in CSE mode, an AOS 07100000 with offset stacking being done or 07110000 start of a data set causes a skip to a new 07120000 sheet. 07130000 07140000 6. On page 371 in Table 19 add the following after XTP7APSF. 07150000 The 'IO' in the following lines are in the INIT columns. 07160000 XTP7NSF IO 07170000 07180000 07190000 -----------CHANGES FOR OW47253---------------------------------- 07200000 07210000 1. On page 69 in table 2, add the following entry 07220000 07230000 ------------------------------------------------------------- 07240000 | ISPF Panel | PIDU | 07250000 |-----------------------------|-----------------------------| 07260000 |Offset Stacking |offset-stacking | 07270000 | | | 07280000 | Values: | Values: | 07290000 | 1 = None | none | 07300000 | 2 = Dataset | dataset | 07310000 | 3 = Job | job | 07320000 ------------------------------------------------------------- 07330000 ... 07340000 ------------------------------------------------------------- 07350000 | Equivalent Parameter | Description | 07360000 |----------------------|------------------------------------| 07370000 | XTP7JOG | Specifies offset stacking. | 07380000 | | If this parameter is not | 07390000 | | specified, PSF uses the JES | 07400000 | | COPYMARK parameter to control | 07410000 | | offset stacking. | 07420000 | | | 07430000 | | See "Separating Copy Marking and | 07440000 | | Offset Stacking" on page 123. | 07450000 ------------------------------------------------------------- 07460000 07470000 07480000 2. On page 123 add the following subsection at the bottom of the 07490000 page, after the subsection "Suppressing Copy Marks" : 07500000 07510000 Separating Copy Marking and Offset Stacking 07520000 07530000 You can override the setting for offset stacking (jogging) 07540000 from the JES COPYMARK parameter by using the Printer Inventory 07550000 or Exit 7. This support lets you control the offset stacking 07560000 separately with the Printer Inventory or Exit 7 while the JES 07570000 COPYMARK parameter only controls the copy marking. 07580000 07590000 With Exit 7 you can set the XTP7JOG field to NONE (no offset 07600000 stacking is done), to DATASET (offset stacking is done on a 07610000 data set boundary), or to JOB (offset stacking is done on a 07620000 job boundary). 07630000 07640000 With the Printer Inventory you can set the offset-stacking 07650000 field to none (no offset stacking is done), to dataset 07660000 (offset stacking is done on a data set boundary, or to job 07670000 (offset stacking is done on a job boundary). 07680000 07690000 If XTP7JOG is set to an incorrect value in Exit 7, PSF 07700000 defaults to the value set by the JES COPYMARK parameter. 07710000 07720000 You can set the XTP7JOG field in the initialization (INIT) call 07730000 to Exit 7 (XTP7INIT) or in the begin data set call (BDSC) to 07740000 Exit 7. In the BDSC, XTP7JOG can only be set ON for the first 07750000 data set of a job. If it is set ON for any other data set in 07760000 the job, PSF ignores the setting. For more information, see 07770000 XTP7JOG on page 267. 07780000 07790000 Note : The JES COPYMARK parameter controls copy marking and offset 07800000 stacking, unless the Printer Inventory offset-stacking field, or 07810000 the Exit 7 XTP7JOG field is set. If either of these fields has 07820000 been set, the JES COPYMARK parameter controls only copy marking, 07830000 and the Printer Inventory or Exit 7 field controls offset 07840000 stacking. 07850000 If the Printer Inventory suppress-copy-marks field, or the Exit 07860000 7 XTP7SUCM field is set, copy marks will be suppressed, regardless 07870000 of the setting of the JES COPYMARK parameter. 07880000 If an Invoke Medium Map (IMM) structured field which references a 07890000 copy group requesting offset stacking is present in the data 07900000 stream, this offset stacking command will override the Printer 07910000 Inventory offset-stacking field, and the Exit 7 XTP7JOG field. 07920000 This will also cause the copy mark count to be incremented, unless 07930000 copy marks have been suppressed through setting the JES COPYMARK 07940000 parameter to NONE, or setting the Printer Inventory 07950000 suppress-copymarks field or Exit 7 XTP7SUCM field to ON. 07960000 07970000 3. On page 254 add the following to Table 20 "APSUX07 Options 07980000 specified in the Printer Inventory". 07990000 08000000 XTP7JOG Offset Stacking Controls offset stacking. For more 08010000 information see "Separating 08020000 Copy Marking and Offset Stacking" 08030000 on page 123. 08040000 08050000 4. On page 255 add the following bulleted item to the list under 08060000 "Begin-Data-Set Call (BDSC)". 08070000 08080000 o Control Offset Stacking. See "Separating Copy Marking and Offset 08090000 Stacking" on page 123. 08100000 08110000 5. On page 347 in Figure 72 change "123 (7B) CHARACTER 1 * RESERVED" 08120000 in the middle of the page to the following. 08130000 08140000 123 (7B) UNSIGNED 1 XTP7JOG JOGGING VALUE - 08150000 (VALID FOR INITIALIZATION 08160000 "XTP7INIT" AND BDSC "XTP7BDS") 08170000 FOR FIRST DATA SET OF A JOB) 08180000 0 = DEFAULT TO JES COPYMARK 08190000 SETTING. 08200000 1 = DO NOT JOG. 08210000 2 = JOG ON A DATASET BOUNDARY. 08220000 3 = JOG ON A JOB BOUNDARY. 08230000 08240000 6. On page 356 just before XTP7FMT add the following. 08250000 08260000 XTP7JOG This option can be set by the Printer Inventory or 08270000 during the INIT call, or during the BDSC, and it 08280000 remains set between calls. PSF initially sets this 08290000 field to '0' to indicate that it is not specified and 08300000 the default is the COPYMARK setting. For more information, 08310000 see "Separating Copy Marking and Offset Stacking" on page 08320000 123. If Exit 7 sets this flag to B'1', B'2', or B'3', PSF 08330000 uses that value for offset stacking. For information 08340000 about specifying this option in the Printer Inventory, 08350000 see Offset Stacking in Table 2 on page 69. 08360000 08370000 7. On page 371 add the following to Table 29 just ahead of XTP7FMT 08380000 under INIT and BDSC. 08390000 08400000 XTP7JOG IO IO 08410000 08420000 08430000 -----------CHANGES FOR OW48960---------------------------------- 08440000 08450000 1. On page 96 add a "Note:" paragraph to each of the following 08460000 PRTnnn parameters: CKPTMODE=PAGE|SEC, CKPTPAGE and CKPTSEC. 08470000 08480000 Note: 08490000 PSF can only use checkpoint information that was created by the 08500000 same level of PSF that is currently printing the data set. In 08510000 other words, if a data set was checkpointed by one version/release 08520000 of PSF, but is now being printed by another version/release of 08530000 PSF the checkpoint data will be ignored and the data set 08540000 restarted from the beginning. 08550000 08560000 2. On page 102 add a "Note:" paragraph to the end of the following 08570000 Device parameters: CKPNTPG (started on pg 101) and CKPNTSEC. 08580000 08590000 Note: 08600000 PSF can only use checkpoint information that was created by the 08610000 same level of PSF that is currently printing the data set. In 08620000 other words, if a data set was checkpointed by one version/release 08630000 of PSF, but is now being printed by another version/release of 08640000 PSF the checkpoint data will be ignored and the data set 08650000 restarted from the beginning. 08660000 08670000 3. On page 279 add a "Note:" to the end of the 3rd paragraph under 08680000 Normal PSF Recovery: 08690000 08700000 Note: 08710000 PSF can only use checkpoint information that was created by the 08720000 same level of PSF that is currently printing the data set. In 08730000 other words, if a data set was checkpointed by one version/release 08740000 of PSF, but is now being printed by another version/release of 08750000 PSF the checkpoint data will be ignored and the data set 08760000 restarted from the beginning. 08770000 08780000 4. On page 420 add the following to the end of the definition of 08790000 checkpoint: 08800000 PSF can only use checkpoint information that was created by the 08810000 same level of PSF that is currently printing the data set. In 08820000 other words, if a data set was checkpointed by one version/release 08830000 of PSF, but is now being printed by another version/release of 08840000 PSF the checkpoint data will be ignored and the data set 08850000 restarted from the beginning. 08860000 08870000 08880000 -----------CHANGES FOR OW53830---------------------------------- 08890000 08900000 1. On page 61, Table 2, under the Description column, change 08910000 the second and third sentence in the first paragraph to read: 08920000 08930000 "... from JES for this time period, PSF issues a message and 08940000 ends the session with the printer. If the JES NPRO parameter 08950000 is nonzero, PSF forces all pages from the last job to reach 08960000 the ... job to be purged from the spool." 08970000 08980000 2. On page 61, Table 2, Description column, after the first 08990000 paragraph, add the following paragraph: 09000000 09010000 "If the JES NPRO parameter is zero, PSF does not force 09020000 all the pages of the last job to the stacker, but does issue 09030000 a message and end the session. To force all the pages of the 09040000 last job to the stacker, send another print job to the 09050000 printer or stop the PSF FSA." 09060000 09070000 3. On page 97, under the NPRO parameter, add the paragraph: 09080000 09090000 "If NPRO=0 and the PSF DISCINTV parameter is being used, PSF 09100000 does not force all the pages of the last job to the stacker 09110000 when the DISCINTV timer expires. Specify a non-zero NPRO 09120000 value to force the last pages of the last job to the stacker 09130000 when the DISCINTV timer expires. For more information, see 09140000 the DISCINTV parameter in Table 2 on page 61." 09150000 09160000 4. On page 103, under the NPRO parameter, add the paragraph: 09170000 09180000 "If NPRO=0 and the PSF DISCINTV parameter is being used, PSF 09190000 does not force all the pages of the last job to the stacker 09200000 when the DISCINTV timer expires. Specify a non-zero NPRO 09210000 value to force the last pages of the last job to the stacker 09220000 when the DISCINTV timer expires. For more information, see 09230000 the DISCINTV parameter in Table 2 on page 61." 09240000 09250000 -----------CHANGES FOR OW55773---------------------------------- 09260000 09270000 1. Change the last entry of the "Form definition (required)" row on 09280000 page 64 to the following: 09290000 09300000 Specifies a required 1-8 character default form definition. Form 09310000 definition names in PSF must begin with an F1 prefix or PSF will 09320000 add the prefix. If the name is 3 or more characters and the first 09330000 2 characters are the F1 prefix, PSF uses the name as is. Otherwise,09340000 if the name does not begin with the F1 prefix and is a maximum of 09350000 6 characters, PSF adds the F1 prefix to the name. If, however, the 09360000 form definition name begins with F1, which is part of the name 09370000 and not the prefix, and is a maximum of 6 characters, you must 09380000 include the prefix in the form definition name. For example, if 09390000 the form definition name is F1A20, you must specify F1F1A20 09400000 as the form definition. For information about how PSF 09410000 selects a form definition, see "How PSF Selects Resources" on 09420000 page 159. 09430000 09440000 2. Change the last entry of the "Page definition (required)" row on 09450000 page 70 to the following: 09460000 09470000 Specifies a required 1-8 character default page definition. Page 09480000 definition names must begin with a P1 prefix or PSF will add the 09490000 prefix. If the name is 3 or more characters and the first 2 09500000 characters are the P1 prefix, PSF uses the name as is. Otherwise, 09510000 if the name does not begin with the P1 prefix and is a maximum of 09520000 6 characters, PSF adds the P1 prefix to the name. If, however, the 09530000 page definition name begins with P1, which is part of the name and 09540000 not the prefix, and is a maximum of 6 characters, you must 09550000 include the prefix in the page definition name. For example, if 09560000 the page definition name is P1011, you must specify P1P1011 as 09570000 the page definition. For information about how PSF 09580000 selects a page definition, see "How PSF Selects Resources" on 09590000 page 159. 09600000 09610000 -----------CHANGES FOR OW56680---------------------------------- 06440000 1. Pages 330 thru 339 in Appendix D. Replace Figure 71 with the 06450000 following new APSRFTBL. 06460000 TITLE 'APSRFTBL RESIDENT FONT RESOURCE TABLES ' 00010000 APSRFTBL START 0 00020000 */****START OF SPECIFICATIONS********************EXTPROC**************/ 00030000 */* */ 00040000 */* MODULE NAME: APSRFTBL */ 00050000 */* */ 00060000 */* DESCRIPTIVE NAME: RESIDENT FONT RESOURCE TABLES */ 00070000 */* */ 00080000 */* FUNCTION: THESE TABLES ALLOW PSF TO DETERMINE THE */ 00090000 */* FONT CHARACTER SETS AND CODE PAGES THAT MAY BE */ 00107990 */* RESIDENT IN THE SYMBOL SET PRINTER(S). THE */ 00115980 */* USER MAY UPDATE THESE TABLES AND CHANGE THE */ 00123970 */* MAPPINGS. IF ANY CHANGES ARE MADE, THEN THIS */ 00131960 */* FILE MUST BE ASSEMBLED AND RE-LINKEDITED. @06C*/ 00139950 */* */ 00150000 */* NOTES: */ 00160000 */* DEPENDENCIES: NONE */ 00170000 */* RESTRICTIONS: NONE */ 00180000 */* REGISTER CONVENTIONS: NONE */ 00190000 */* PATCH LABEL: NONE */ 00200000 */* */ 00210000 */* MODULE TYPE: PROCEDURE */ 00220000 */* PROCESSOR: OS ASSEMBLER H */ 00230000 */* MODULE SIZE: 900 */ 00240000 */* ATTRIBUTES: READ ONLY, NO EXECUTABLE CODE */ 00250000 */* */ 00260000 */* */ 00270000 */* ENTRY POINT: APSCS24V */ 00280000 */* PURPOSE: THIS IS THE TABLE OF RESIDENT FONT CHARACTER */ 00290000 */* SETS IN THE 4224 PRINTER. THIS TABLE IS @02C*/ 00303990 */* ALSO USED BY THE 4230 AND 4247 PRINTERS WHEN */ 00307980 */* RUN IN 4224 EMULATION MODE. @05A*/ 00311970 */* IT CAN BE CHANGED BY THE USER. */ 00315960 */* THE TABLE IS TERMINATED BY A STRING OF */ 00320000 */* CL8'FFFFFFFF'. */ 00330000 */* LINKAGE: NONE */ 00340000 */* */ 00350000 */* ENTRY POINT: APSCP24V */ 00360000 */* PURPOSE: THIS IS A TABLE OF RESIDENT CODE PAGES IN THE */ 00370000 */* 4224 PRINTER. THIS TABLE IS ALSO USED BY @02C*/ 00383990 */* THE 4230 AND 4247 PRINTERS WHEN RUN IN 4224 */ 00387980 */* EMULATION MODE. @05A*/ 00391970 */* IT CAN BE CHANGED BY THE USER. */ 00395960 */* THE TABLE IS TERMINATED BY A STRING OF */ 00400000 */* CL8'FFFFFFFF'. */ 00410000 */* LINKAGE: NONE */ 00420000 */* */ 00430000 */* ENTRY POINT: APSCS34V */ 00440000 */* PURPOSE: THIS IS THE TABLE OF RESIDENT FONT CHARACTER */ 00450000 */* SETS IN THE 4234 PRINTER. THIS TABLE IS ALSO */ 00461990 */* USED BY THE 64XX PRINTERS WHEN RUN IN 4234 */ 00463980 */* EMULATION MODE. IT CAN BE CHANGED @05A*/ 00465970 */* BY THE USER. THE TABLE IS TERMINATED BY A */ 00470000 */* A STRING OF CL8'FFFFFFFF'. */ 00480000 */* LINKAGE: NONE */ 00490000 */* */ 00500000 */* ENTRY POINT: APSCP34V */ 00510000 */* PURPOSE: THIS IS A TABLE OF RESIDENT CODE PAGES IN THE */ 00520000 */* 4234 PRINTER. THIS TABLE IS ALSO USED BY THE */ 00531990 */* 64XX PRINTERS WHEN RUN IN 4234 EMULATION MODE. */ 00533980 */* IT CAN BE CHANGED BY THE USER. @05A*/ 00535970 */* THE TABLE IS TERMINATED BY A STRING OF */ 00540000 */* CL8'FFFFFFFF'. */ 00550000 */* LINKAGE: NONE */ 00560000 */* */ 00570000 */* ENTRY POINT: APSCS47V @04A*/ 00580000 */* PURPOSE: THIS IS THE TABLE OF RESIDENT FONT CHARACTER */ 00590000 */* SETS IN THE 4247 PRINTER. IT CAN BE CHANGED */ 00600000 */* BY THE USER. THE TABLE IS TERMINATED BY A */ 00610000 */* A STRING OF CL8'FFFFFFFF'. */ 00620000 */* LINKAGE: NONE */ 00630000 */* */ 00640000 */* ENTRY POINT: APSCP47V @04A*/ 00650000 */* PURPOSE: THIS IS A TABLE OF RESIDENT CODE PAGES IN THE */ 00660000 */* 4247 PRINTER. IT CAN BE CHANGED BY THE USER. */ 00670000 */* THE TABLE IS TERMINATED BY A STRING OF */ 00680000 */* CL8'FFFFFFFF'. */ 00690000 */* */ 00700000 */* LINKAGE: NONE */ 00710000 */* ENTRY POINT: APSCS64X @03A*/ 00720000 */* PURPOSE: THIS IS THE TABLE OF RESIDENT FONT CHARACTER */ 00730000 */* SETS IN THE 64XX PRINTER. IT CAN BE CHANGED */ 00740000 */* BY THE USER. THE TABLE IS TERMINATED BY A */ 00750000 */* A STRING OF CL8'FFFFFFFF'. */ 00760000 */* LINKAGE: NONE */ 00770000 */* */ 00780000 */* ENTRY POINT: APSCP64X @03A*/ 00790000 */* PURPOSE: THIS IS A TABLE OF RESIDENT CODE PAGES IN THE */ 00800000 */* 64XX PRINTER. IT CAN BE CHANGED BY THE USER. */ 00810000 */* THE TABLE IS TERMINATED BY A STRING OF */ 00820000 */* CL8'FFFFFFFF'. */ 00830000 */* LINKAGE: NONE */ 00840000 */* */ 00850000 */* */ 00860000 */* TABLES: */ 00870000 */* APSCS24V - 4224 & 4230 RESIDENT CHAR SET MAPPING TABLE */ 00880000 */* APSCP24V - 4224 & 4230 RESIDENT CODE PAGE MAPPING TABLE */ 00890000 */* APSCS34V - 4234 RESIDENT CHAR SET MAPPING TABLE */ 00900000 */* APSCP34V - 4234 RESIDENT CODE PAGE MAPPING TABLE */ 00910000 */* APSCS47V - 4247 RESIDENT CHAR SET MAPPING TABLE @04A*/ 00920000 */* APSCP47V - 4247 RESIDENT CODE PAGE MAPPING TABLE @04A*/ 00930000 */* APSCS64X - 6400/6408/6412 RESIDENT CHAR SET MAPPING TABLE */ 00940000 */ @03A*/ 00950000 */* APSCP64X - 6400/6408/6412 RESIDENT CODE PAGE MAPPING */ 00960000 */* @03A*/ 00970000 */* */ 00980000 */* MESSAGES: NONE */ 00990000 */* */ 01000000 */* CHANGE ACTIVITY */ 01010000 */* */ 01020000 */* $00=LAPS0005,HAF1237, 022690, B51PATM: RELEASE 2.1.0 @00A*/ 01030000 */* $H7=LAPS0005,HPRF102, 040690, B51PATM: REL 2.1.0 STAGE 2 @H7A*/ 01040000 */* $01=OY53959, HPRF102, 060292, BJ13KZB: INCORRECT FGID @01A*/ 01050000 */* $02=OY56466, HPRF102, 080492, BJ13KZB: ADD 4230 CODEPAGES 875 & */ 01060000 */* 1026 @02A*/ 01070000 */* $03=OW04104, HPRF220, 040694, BJ13KPC: 6408/6412 SUPPORT @03A*/ 01080000 */* $04=OW19064, HPRF220, 960307, BDKUMLC: 4247 support @04A*/ 01090000 */* $DU=LAPS0007,HPRF310,980604,BDKURLB: Version 3.1.0 @DUA*/ 01100000 */* $05=OW36740, HPRF310, 981028, BDKUEAS: Euro support for impact */ 01103000 */* printers @05A*/ 01106000 */* $06=OW56680, HPRF310,021025,BDKULD : More 4247 support @06A*/ 01108000 */* */ 01110000 */**********************END OF SPECIFICATIONS*************************/ 01120000 */********************************************************************/ 01130000 */* */ 01140000 */* BAL CODE FOLLOWS */ 01150000 */* */ 01160000 */********************************************************************/ 01170000 APSRFTBL CSECT ENTRY POINT OF THIS MODULE 01180000 APSRFTBL AMODE 31 DO NOT REMOVE/CHANGE 01190000 APSRFTBL RMODE ANY DO NOT REMOVE/CHANGE 01200000 CS4224@ DC V(APSCS24V) DO NOT REMOVE/CHANGE 01210000 CP4224@ DC V(APSCP24V) DO NOT REMOVE/CHANGE 01220000 CS4234@ DC V(APSCS34V) DO NOT REMOVE/CHANGE 01230000 CP4234@ DC V(APSCP34V) DO NOT REMOVE/CHANGE 01240000 CS4247@ DC V(APSCS47V) DO NOT REMOVE/CHANGE @04A 01250000 CP4247@ DC V(APSCP47V) DO NOT REMOVE/CHANGE @04A 01260000 CS64XX@ DC V(APSCS64X) DO NOT REMOVE/CHANGE @03A* 01270000 CP64XX@ DC V(APSCP64X) DO NOT REMOVE/CHANGE @03A* 01280000 *********************************************************************** 01290000 * THE FOLLOWING IS THE CHARACTER SET TABLE FOR THE 4224 PRINTER. IT * 01305990 * IS ALSO USED FOR THE 4230 AND 4247 PRINTERS WHEN RUNNING IN 4224 * 01311980 * EMULATION MODE. THE FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE @05A* 01317970 * NAME OF THE FONT CHARACTER SET. THE NEXT TWO (2) BYTE FIELD IS THE * 01323960 * GLOBAL ID OF CORRESPONDING RESIDENT FONT. THE NEXT TWO (2) BYTE * 01329950 * FIELD DEFINES THE FONT ATTRIBUTES. THE FIRST BYTE IS RESERVED AND * 01335940 * THE SECOND BYTE DEFINES WHETHER THE FONT IS ITALIC, DOUBLE STRIKE, * 01341930 * BOLD, OR DOUBLE WIDE. 01347920 * * 01360000 * FOR MORE INFORMATION ON THE 4224 RESIDENT FONTS, SEE THE "IBM 4224 * 01370000 * PRINTER PRODUCT AND PROGRAMMING DESCRIPTION MANUAL (GC31-2551)." * 01380000 *********************************************************************** 01390000 ENTRY APSCS24V DO NOT REMOVE/CHANGE 01400000 APSCS24V DS 0D DO NOT REMOVE/CHANGE 01410000 DC CL8'C0L00BOA',XL2'0003',XL2'0000' OCR-B 01420000 DC CL8'C0S0CR10',XL2'000B',XL2'0000' COURIER 10 01430000 DC CL8'C0S0CB10',XL2'000B',XL2'0002' COURIER BOLD 10 01440000 DC CL8'C0S0CI10',XL2'000B',XL2'0008' COURIER ITALIC 10 01450000 DC CL8'C0L00AOA',XL2'0013',XL2'0000' OCR-A 01460000 DC CL8'C0L0KATA',XL2'001A',XL2'0000' KATAKANA 01470000 DC CL8'C0S0AE10',XL2'001A',XL2'0000' APL 10 01480000 DC CL8'C0D0GT10',XL2'001A',XL2'0000' GOTHIC TEXT 10 01490000 DC CL8'C0D0GB10',XL2'001A',XL2'0002' GOTHIC BOLD 10 01500000 DC CL8'C0S0CR12',XL2'0055',XL2'0000' COURIER 12 01510000 DC CL8'C0S0CB12',XL2'0055',XL2'0002' COURIER BOLD 12 01520000 DC CL8'C0S0CI12',XL2'0055',XL2'0008' COURIER ITALIC 12 01530000 DC CL8'C0D0GT12',XL2'0057',XL2'0000' GOTHIC TEXT 12 01540000 DC CL8'C0D0GB12',XL2'0057',XL2'0002' GOTHIC BOLD 12 01550000 DC CL8'C0D0GI12',XL2'0057',XL2'0008' GOTHIC ITALIC 12 01560000 DC CL8'C0S0ESTR',XL2'00A0',XL2'0000' ESSAY 01570000 DC CL8'C0S0EBTR',XL2'00A0',XL2'0002' ESSAY BOLD 01580000 DC CL8'C0S0EITR',XL2'00A0',XL2'0008' ESSAY ITALIC 01590000 DC CL8'C0D0GT15',XL2'00DE',XL2'0000' GOTHIC TEXT 15 01600000 DC CL8'C0S0CR15',XL2'00DF',XL2'0000' COURIER 15 01610000 DC CL8'C0S0CB15',XL2'00DF',XL2'0002' COURIER BOLD 15 01620000 DC CL8'C0S0CI15',XL2'00DF',XL2'0008' COURIER ITALIC 15 01630000 DC CL8'C0S0CD15',XL2'00DF',XL2'0001' COURIER DBL-WIDE 15 01640000 DC CL8'C0S0CW15',XL2'00DF',XL2'0009' COURIER DBL-WIDE ITAL 01650000 *********************************************************************** 01651000 * The following Character sets are used only with the 4247 * 01652000 * printer when run in 4224 emulation mode. @06A* 01653000 *********************************************************************** 01654000 DC CL8'C0E0CR0R',XL2'000B',XL2'0000' COURIER 10 @06A 01655000 DC CL8'C0520060',XL2'000B',XL2'0000' COURIER 10 @06A 01656000 DC CL8'FFFFFFFF',XL2'FFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 01660000 *********************************************************************** 01670000 * THE FOLLOWING IS THE CODE PAGE TABLE FOR THE 4224 PRINTER. IT IS * 01685990 * ALSO USED FOR THE 4230 AND 4247 PRINTERS WHEN RUNNING IN 4224 * 01691980 * EMULATION MODE. THE FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE @05A* 01697970 * NAME OF THE CODE PAGE. THE NEXT TWO (2) BYTE FIELD IS THE GLOBAL * 01703960 * ID OF THE CORRESPONDING RESIDENT CODE PAGE. * 01709950 * * 01720000 * FOR MORE INFORMATION ON THE 4224 RESIDENT FONTS, SEE THE "IBM 4224 * 01730000 * PRINTER PRODUCT AND PROGRAMMING DESCRIPTION MANUAL (GC31-2551)." * 01740000 *********************************************************************** 01750000 ENTRY APSCP24V DO NOT REMOVE/CHANGE 01760000 APSCP24V DS 0D DO NOT REMOVE/CHANGE 01770000 DC CL8'T1D0BASE',XL2'03EA' CODE PAGE 1002 01780000 DC CL8'T1L038BA',XL2'03EA' CODE PAGE 1002 01790000 DC CL8'T1V10037',XL2'0025' CODE PAGE 37 01800000 DC CL8'T1V10273',XL2'0111' CODE PAGE 273 01810000 DC CL8'T1V10274',XL2'0112' CODE PAGE 274 01820000 DC CL8'T1V10275',XL2'0113' CODE PAGE 275 01830000 DC CL8'T1V10277',XL2'0115' CODE PAGE 277 01840000 DC CL8'T1V10278',XL2'0116' CODE PAGE 278 01850000 DC CL8'T1V10280',XL2'0118' CODE PAGE 280 01860000 DC CL8'T1V10281',XL2'0119' CODE PAGE 281 01870000 DC CL8'T1V10282',XL2'011A' CODE PAGE 282 01880000 DC CL8'T1V10284',XL2'011C' CODE PAGE 284 01890000 DC CL8'T1V10285',XL2'011D' CODE PAGE 285 01900000 DC CL8'T1000290',XL2'0122' CODE PAGE 290 01910000 DC CL8'T1L02773',XL2'0122' CODE PAGE 290 SUBSET 01920000 DC CL8'T1L02774',XL2'0122' CODE PAGE 290 SUBSET 01930000 DC CL8'T1S0AE10',XL2'0125' CODE PAGE 293 01940000 DC CL8'T1V10297',XL2'0129' CODE PAGE 297 01950000 DC CL8'T1L0OCR1',XL2'0154' CODE PAGE 340 01960000 DC CL8'T1L0OCRB',XL2'0154' CODE PAGE 340 01970000 DC CL8'T1V10500',XL2'01F4' CODE PAGE 500 01980000 DC CL8'T1001140',XL2'0474' CODE PAGE 1140 @05A 01980900 DC CL8'T1001141',XL2'0475' CODE PAGE 1141 @05A 01981800 DC CL8'T1001142',XL2'0476' CODE PAGE 1142 @05A 01982700 DC CL8'T1001143',XL2'0477' CODE PAGE 1143 @05A 01983600 DC CL8'T1001144',XL2'0478' CODE PAGE 1144 @05A 01984500 DC CL8'T1001145',XL2'0479' CODE PAGE 1145 @05A 01985400 DC CL8'T1001146',XL2'047A' CODE PAGE 1146 @05A 01986300 DC CL8'T1001147',XL2'047B' CODE PAGE 1147 @05A 01987200 DC CL8'T1001148',XL2'047C' CODE PAGE 1148 @05A 01988100 DC CL8'T1001149',XL2'047D' CODE PAGE 1149 @05A 01989000 *********************************************************************** 01990000 * THE FOLLOWING CODE PAGES 875 AND 1026 ARE TO BE USED WITH THE @02A* 02000000 * 4230 PRINTER ONLY. @02A* 02010000 *********************************************************************** 02020000 DC CL8'T1000875',XL2'036B' CODE PAGE 875 @02A 02030000 DC CL8'T1001026',XL2'0402' CODE PAGE 1026 @02A 02040000 *********************************************************************** 02041000 * THE FOLLOWING CODE PAGES ARE USED ONLY WITH THE 4247 @06C* 02042490 * PRINTER WHEN RUN IN 4224 EMULATION MODE @05A* 02043000 *********************************************************************** 02044000 DC CL8'T1000260',XL2'0104' CODE PAGE 260 @06A 02044100 DC CL8'T1000286',XL2'011E' CODE PAGE 286 @06A 02044200 DC CL8'T1000287',XL2'011F' CODE PAGE 287 @06A 02044300 DC CL8'T1000288',XL2'0120' CODE PAGE 288 @06A 02044400 DC CL8'T1000289',XL2'0121' CODE PAGE 289 @06A 02044500 DC CL8'T1000437',XL2'01B5' CODE PAGE 437 @06A 02044600 DC CL8'T1V10282',XL2'033F' CODE PAGE 831 @06A 02044700 DC CL8'T1H00833',XL2'0341' CODE PAGE 833 @06A 02044800 DC CL8'T1000890',XL2'037A' CODE PAGE 890 @06A 02044900 DC CL8'T1L00924',XL2'039C' CODE PAGE 924 @05A 02045000 DC CL8'T1001112',XL2'0458' CODE PAGE 1112 @06A 02046000 DC CL8'T1001122',XL2'0462' CODE PAGE 1122 @06A 02047000 DC CL8'FFFFFFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 02050000 *********************************************************************** 02060000 * THE FOLLOWING IS THE CHARACTER SET TABLE FOR THE 4234 PRINTER. IT * 02075990 * IS ALSO USED FOR THE 64XX PRINTERS WHEN RUNNING IN 4234 EMULATION * 02081980 * MODE. THE FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF @05A* 02087970 * THE FONT CHARACTER SET. THE NEXT TWO (2) BYTE FIELD IS THE GLOBAL * 02093960 * ID OF CORRESPONDING RESIDENT FONT. THE NEXT TWO (2) BYTE FIELD * 02099950 * DEFINES THE FONT ATTRIBUTES. THE FIRST BYTE IS RESERVED AND THE * 02105940 * SECOND BYTE DEFINES WHETHER THE FONT IS ITALIC, DOUBLE STRIKE, * 02111930 * BOLD, OR DOUBLE WIDE. * 02117920 * * 02130000 * FOR MORE INFORMATION ON THE 4234 RESIDENT FONTS, SEE THE "IBM 4234 * 02140000 * PRINTER PRODUCT AND PROGRAMMING DESCRIPTION MANUAL (GC31-2554)." * 02150000 *********************************************************************** 02160000 ENTRY APSCS34V DO NOT REMOVE/CHANGE 02170000 APSCS34V DS 0D DO NOT REMOVE/CHANGE 02180000 DC CL8'C0L00BOA',XL2'0003',XL2'0000' OCR-B 02190000 DC CL8'C0S0CR10',XL2'000B',XL2'0000' COURIER 10 02200000 DC CL8'C0S0CB10',XL2'000B',XL2'0002' COURIER BOLD 10 02210000 DC CL8'C0S0CI10',XL2'000B',XL2'0008' COURIER ITALIC 10 02220000 DC CL8'C0L00AOA',XL2'0013',XL2'0000' OCR-A 02230000 DC CL8'C0L0KATA',XL2'001A',XL2'0000' KATAKANA 02240000 DC CL8'C0S0AE10',XL2'001A',XL2'0000' APL 10 02250000 DC CL8'C0D0GT10',XL2'001A',XL2'0000' GOTHIC TEXT 10 02260000 DC CL8'C0D0GB10',XL2'001A',XL2'0002' GOTHIC BOLD 10 02270000 DC CL8'C0S0CR12',XL2'0055',XL2'0000' COURIER 12 02280000 DC CL8'C0S0CB12',XL2'0055',XL2'0002' COURIER BOLD 12 02290000 DC CL8'C0S0CI12',XL2'0055',XL2'0008' COURIER ITALIC 12 02300000 DC CL8'C0D0GT12',XL2'0057',XL2'0000' GOTHIC TEXT 12 02310000 DC CL8'C0D0GB12',XL2'0057',XL2'0002' GOTHIC BOLD 12 02320000 DC CL8'C0D0GI12',XL2'0057',XL2'0008' GOTHIC ITALIC 12 02330000 DC CL8'C0S0ESTR',XL2'00A0',XL2'0000' ESSAY 02340000 DC CL8'C0S0EBTR',XL2'00A0',XL2'0002' ESSAY BOLD 02350000 DC CL8'C0S0EITR',XL2'00A0',XL2'0008' ESSAY ITALIC 02360000 DC CL8'C0S0D224',XL2'00CC',XL2'0000' GOTHIC TEXT 13 @01C 02370000 DC CL8'C0S0D225',XL2'00CC',XL2'0000' GOTHIC TEXT 13 @01C 02380000 DC CL8'C0S0D226',XL2'00CC',XL2'0002' GOTHIC BOLD 13 @01C 02390000 DC CL8'C0S0D227',XL2'00CC',XL2'0008' GOTHIC ITAL 13 @01C 02400000 DC CL8'C0D0GT15',XL2'00DE',XL2'0000' GOTHIC TEXT 15 02410000 DC CL8'C0S0CR15',XL2'00DF',XL2'0000' COURIER 15 02420000 DC CL8'C0S0CB15',XL2'00DF',XL2'0002' COURIER BOLD 15 02430000 DC CL8'C0S0CI15',XL2'00DF',XL2'0008' COURIER ITALIC 15 02440000 DC CL8'C0S0CD15',XL2'00DF',XL2'0001' COURIER DBL-WIDE 15 02450000 DC CL8'C0S0CW15',XL2'00DF',XL2'0009' COURIER DBL-WIDE ITAL 02460000 DC CL8'FFFFFFFF',XL2'FFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 02470000 *********************************************************************** 02480000 * THE FOLLOWING IS THE CODE PAGE TABLE FOR THE 4234 PRINTER. IT IS * 02495990 * ALSO USED FOR THE 64XX PRINTERS WHEN RUNNING IN 4224 EMULATION MODE.* 02501980 * THE FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF THE CODE @05A* 02507970 * PAGE. THE NEXT TWO (2) BYTE FIELD IS THE GLOBAL ID OF THE CORRE- * 02513960 * SPONDING RESIDENT CODE PAGE. * 02519950 * * 02530000 * FOR MORE INFORMATION ON THE 4234 RESIDENT FONTS, SEE THE "IBM 4234 * 02540000 * PRINTER PRODUCT AND PROGRAMMING DESCRIPTION MANUAL (GC31-2554)." * 02550000 *********************************************************************** 02560000 ENTRY APSCP34V DO NOT REMOVE/CHANGE 02570000 APSCP34V DS 0D DO NOT REMOVE/CHANGE 02580000 DC CL8'T1D0BASE',XL2'03EA' CODE PAGE 1002 02590000 DC CL8'T1L038BA',XL2'03EA' CODE PAGE 1002 02600000 DC CL8'T1V10037',XL2'0025' CODE PAGE 37 02610000 DC CL8'T1V10273',XL2'0111' CODE PAGE 273 02620000 DC CL8'T1V10274',XL2'0112' CODE PAGE 274 02630000 DC CL8'T1V10275',XL2'0113' CODE PAGE 275 02640000 DC CL8'T1V10277',XL2'0115' CODE PAGE 277 02650000 DC CL8'T1V10278',XL2'0116' CODE PAGE 278 02660000 DC CL8'T1V10280',XL2'0118' CODE PAGE 280 02670000 DC CL8'T1V10281',XL2'0119' CODE PAGE 281 02680000 DC CL8'T1V10282',XL2'011A' CODE PAGE 282 02690000 DC CL8'T1V10284',XL2'011C' CODE PAGE 284 02700000 DC CL8'T1V10285',XL2'011D' CODE PAGE 285 02710000 DC CL8'T1000290',XL2'0122' CODE PAGE 290 02720000 DC CL8'T1L02773',XL2'0122' CODE PAGE 290 SUBSET 02730000 DC CL8'T1L02774',XL2'0122' CODE PAGE 290 SUBSET 02740000 DC CL8'T1S0AE10',XL2'0125' CODE PAGE 293 02750000 DC CL8'T1V10297',XL2'0129' CODE PAGE 297 02760000 DC CL8'T1000310',XL2'0136' CODE PAGE 310 02770000 DC CL8'T1000420',XL2'01A4' CODE PAGE 420 02780000 DC CL8'T1000423',XL2'01A7' CODE PAGE 423 02790000 DC CL8'T1000424',XL2'01A8' CODE PAGE 424 02800000 DC CL8'T1V10500',XL2'01F4' CODE PAGE 500 02810000 DC CL8'T1000838',XL2'0346' CODE PAGE 838 02820000 DC CL8'T1000870',XL2'0366' CODE PAGE 870 02830000 DC CL8'T1V10871',XL2'0367' CODE PAGE 871 02840000 DC CL8'T1L0OCR1',XL2'037C' CODE PAGE 892 02850000 DC CL8'T1L0OCRB',XL2'037D' CODE PAGE 893 02860000 *********************************************************************** 02860600 * THE FOLLOWING CODE PAGES ARE TO BE USED ONLY WITH THE 64XX @05A* 02861200 * PRINTERS WHEN RUN IN 4234 EMULATION MODE @05A* 02861800 *********************************************************************** 02862400 DC CL8'T1L00924',XL2'039C' CODE PAGE 924 @05A 02863000 DC CL8'T1001140',XL2'0474' CODE PAGE 1140 @05A 02863600 DC CL8'T1001141',XL2'0475' CODE PAGE 1141 @05A 02864200 DC CL8'T1001142',XL2'0476' CODE PAGE 1142 @05A 02864800 DC CL8'T1001143',XL2'0477' CODE PAGE 1143 @05A 02865400 DC CL8'T1001144',XL2'0478' CODE PAGE 1144 @05A 02866000 DC CL8'T1001145',XL2'0479' CODE PAGE 1145 @05A 02866600 DC CL8'T1001146',XL2'047A' CODE PAGE 1146 @05A 02867200 DC CL8'T1001147',XL2'047B' CODE PAGE 1147 @05A 02867800 DC CL8'T1001148',XL2'047C' CODE PAGE 1148 @05A 02868400 DC CL8'T1001149',XL2'047D' CODE PAGE 1149 @05A 02869000 DC CL8'FFFFFFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 02870000 *********************************************************************** 02880000 * THE FOLLOWING IS THE CHARACTER SET TABLE FOR THE 4247 PRINTER. THE * 02890000 * FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF THE FONT CHARAC- * 02900000 * TER SET. THE NEXT TWO (2) BYTE FIELD IS THE GLOBAL ID OF CORRESPON- * 02910000 * DING RESIDENT FONT. THE NEXT TWO (2) BYTE FIELD DEFINES THE FONT * 02920000 * ATTRIBUTES. THE FIRST BYTE IS RESERVED AND THE SECOND BYTE DEFINES * 02930000 * WHETHER THE FONT IS ITALIC, DOUBLE STRIKE, BOLD, OR DOUBLE WIDE.@04P* 02940000 *********************************************************************** 02950000 ENTRY APSCS47V DO NOT REMOVE/CHANGE 02960000 APSCS47V DS 0D DO NOT REMOVE/CHANGE 02970000 DC CL8'C0L00BOA',XL2'0003',XL2'0000' OCR-B @04P 02980000 DC CL8'C0S0CR10',XL2'000B',XL2'0000' COURIER 10 @04P 02990000 DC CL8'C0E0CR0R',XL2'000B',XL2'0000' COURIER 10 @06A 02993000 DC CL8'C0520060',XL2'000B',XL2'0000' COURIER 10 @06A 02996000 DC CL8'C0S0CB10',XL2'000B',XL2'0002' COURIER BOLD 10 @04P 03000000 DC CL8'C0S0CI10',XL2'000B',XL2'0008' COURIER ITAL 10 @04P 03010000 DC CL8'C0L00AOA',XL2'0013',XL2'0000' OCR-A @04P 03020000 DC CL8'C0L0KATA',XL2'001A',XL2'0000' KATAKANA @04P 03030000 DC CL8'C0S0AE10',XL2'001A',XL2'0000' APL 10 @04P 03040000 DC CL8'C0D0GT10',XL2'001A',XL2'0000' GOTHIC TEXT 10 @04P 03050000 DC CL8'C0D0GB10',XL2'001A',XL2'0002' GOTHIC BOLD 10 @04P 03060000 DC CL8'C0S0CR12',XL2'0055',XL2'0000' COURIER 12 @04P 03070000 DC CL8'C0S0CB12',XL2'0055',XL2'0002' COURIER BOLD 12 @04P 03080000 DC CL8'C0S0CI12',XL2'0055',XL2'0008' COURIER ITAL 12 @04P 03090000 DC CL8'C0D0GT12',XL2'0057',XL2'0000' GOTHIC TEXT 12 @04P 03100000 DC CL8'C0D0GB12',XL2'0057',XL2'0002' GOTHIC BOLD 12 @04P 03110000 DC CL8'C0D0GI12',XL2'0057',XL2'0008' GOTHIC ITALIC 12 @04P 03120000 DC CL8'C0S0ESTR',XL2'00A0',XL2'0000' ESSAY @04P 03130000 DC CL8'C0S0EBTR',XL2'00A0',XL2'0002' ESSAY BOLD @04P 03140000 DC CL8'C0S0EITR',XL2'00A0',XL2'0008' ESSAY ITALIC @04P 03150000 DC CL8'C0D0GT15',XL2'00DE',XL2'0000' GOTHIC TEXT 15 @04P 03160000 DC CL8'C0S0CR15',XL2'00DF',XL2'0000' COURIER 15 @04P 03170000 DC CL8'C0S0CB15',XL2'00DF',XL2'0002' COURIER BOLD 15 @04P 03180000 DC CL8'C0S0CI15',XL2'00DF',XL2'0008' COURIER ITAL 15 @04P 03190000 DC CL8'C0S0CD15',XL2'00DF',XL2'0001' COUR DBL-WID 15 @04P 03200000 DC CL8'C0S0CW15',XL2'00DF',XL2'0009' COUR DBL-WID ITAL@04P 03210000 DC CL8'FFFFFFFF',XL2'FFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 03220000 *********************************************************************** 03230000 * THE FOLLOWING IS THE CODE PAGE TABLE FOR THE 4247 PRINTER. THE FIRST* 03240000 * EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF THE CODE PAGE. THE * 03250000 * NEXT TWO (2) BYTE FIELD IS THE GLOBAL ID OF THE CORRESPONDING * 03260000 * RESIDENT CODE PAGE. @04P* 03270000 *********************************************************************** 03280000 ENTRY APSCP47V DO NOT REMOVE/CHANGE 03290000 APSCP47V DS 0D DO NOT REMOVE/CHANGE 03300000 DC CL8'T1D0BASE',XL2'03EA' CODE PAGE 1002 @04P 03310000 DC CL8'T1L038BA',XL2'03EA' CODE PAGE 1002 @04P 03320000 DC CL8'T1GDP256',XL2'0100' CODE PAGE 256 @04A 03330000 DC CL8'T1V10037',XL2'0025' CODE PAGE 37 @04P 03340000 DC CL8'T1000260',XL2'0104' CODE PAGE 260 @06A 03345000 DC CL8'T1V10273',XL2'0111' CODE PAGE 273 @04P 03350000 DC CL8'T1V10274',XL2'0112' CODE PAGE 274 @04P 03360000 DC CL8'T1V10275',XL2'0113' CODE PAGE 275 @04P 03370000 DC CL8'T1V10277',XL2'0115' CODE PAGE 277 @04P 03380000 DC CL8'T1V10278',XL2'0116' CODE PAGE 278 @04P 03390000 DC CL8'T1V10280',XL2'0118' CODE PAGE 280 @04P 03400000 DC CL8'T1V10281',XL2'0119' CODE PAGE 281 @04P 03410000 DC CL8'T1V10282',XL2'011A' CODE PAGE 282 @04P 03420000 DC CL8'T1V10284',XL2'011C' CODE PAGE 284 @04P 03430000 DC CL8'T1V10285',XL2'011D' CODE PAGE 285 @04P 03440000 DC CL8'T1000286',XL2'011E' CODE PAGE 286 @06A 03442000 DC CL8'T1000287',XL2'011F' CODE PAGE 287 @06A 03444000 DC CL8'T1000288',XL2'0120' CODE PAGE 288 @06A 03446000 DC CL8'T1000289',XL2'0121' CODE PAGE 289 @06A 03448000 DC CL8'T1000290',XL2'0122' CODE PAGE 290 @04P 03450000 DC CL8'T1L02773',XL2'0122' CODE PAGE 290 SUB@04P 03460000 DC CL8'T1L02774',XL2'0122' CODE PAGE 290 SUB@04P 03470000 DC CL8'T1S0AE10',XL2'0125' CODE PAGE 293 @04P 03480000 DC CL8'T1V10297',XL2'0129' CODE PAGE 297 @04P 03490000 DC CL8'T1000310',XL2'0136' CODE PAGE 310 @04P 03500000 DC CL8'T1L0OCR1',XL2'0154' CODE PAGE 340 @06A 03503000 DC CL8'T1L0OCRB',XL2'0154' CODE PAGE 340 @06A 03506000 DC CL8'T1000420',XL2'01A4' CODE PAGE 420 @04P 03510000 DC CL8'T1000423',XL2'01A7' CODE PAGE 423 @04P 03520000 DC CL8'T1000424',XL2'01A8' CODE PAGE 424 @04P 03530000 DC CL8'T1000437',XL2'01B5' CODE PAGE 437 @06A 03535000 DC CL8'T1V10500',XL2'01F4' CODE PAGE 500 @04P 03540000 DC CL8'T1000803',XL2'0323' CODE PAGE 803 @04A 03550000 DC CL8'T1V10282',XL2'033F' CODE PAGE 831 @06A 03553000 DC CL8'T1H00833',XL2'0341' Ethernet only CP 833 @06A 03556000 DC CL8'T1000838',XL2'0346' CODE PAGE 838 @04P 03560000 DC CL8'T1000870',XL2'0366' CODE PAGE 870 @04P 03570000 DC CL8'T1V10871',XL2'0367' CODE PAGE 871 @04P 03580000 DC CL8'T1000875',XL2'036B' CODE PAGE 875 @04A 03590000 DC CL8'T1000880',XL2'0370' CODE PAGE 880 @04A 03600000 DC CL8'T1000890',XL2'037A' CODE PAGE 890 @06A 03605000 DC CL8'T1000892',XL2'037C' CODE PAGE 892 @04P 03610000 DC CL8'T1L0OCR1',XL2'037C' CODE PAGE 892 @04P 03620000 DC CL8'T1000893',XL2'037D' CODE PAGE 893 @04A 03630000 DC CL8'T1L0OCRB',XL2'037D' CODE PAGE 893 @04P 03640000 DC CL8'T1L00924',XL2'039C' CODE PAGE 924 @05A 03645000 DC CL8'T1001025',XL2'0401' CODE PAGE 1025 @04A 03650000 DC CL8'T1001026',XL2'0402' CODE PAGE 1026 @04A 03660000 DC CL8'T1001112',XL2'0458' Ethernet only CP 1112 @06A 03660300 DC CL8'T1001122',XL2'0462' Ethernet only CP 1122 @06A 03660600 DC CL8'T1001140',XL2'0474' CODE PAGE 1140 @05A 03660900 DC CL8'T1001141',XL2'0475' CODE PAGE 1141 @05A 03661800 DC CL8'T1001142',XL2'0476' CODE PAGE 1142 @05A 03662700 DC CL8'T1001143',XL2'0477' CODE PAGE 1143 @05A 03663600 DC CL8'T1001144',XL2'0478' CODE PAGE 1144 @05A 03664500 DC CL8'T1001145',XL2'0479' CODE PAGE 1145 @05A 03665400 DC CL8'T1001146',XL2'047A' CODE PAGE 1146 @05A 03666300 DC CL8'T1001147',XL2'047B' CODE PAGE 1147 @05A 03667200 DC CL8'T1001148',XL2'047C' CODE PAGE 1148 @05A 03668100 DC CL8'T1001149',XL2'047D' CODE PAGE 1149 @05A 03669000 DC CL8'FFFFFFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 03670000 *********************************************************************** 03680000 * THE FOLLOWING IS THE CHARACTER SET TABLE FOR THE 64XX PRINTER. THE * 03690000 * FIRST EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF THE FONT CHARAC- * 03700000 * TER SET. THE NEXT TWO (2) BYTE FIELD IS THE GLOBAL ID OF CORRESPON- * 03710000 * DING RESIDENT FONT. THE NEXT TWO (2) BYTE FIELD DEFINES THE FONT * 03720000 * ATTRIBUTES. THE FIRST BYTE IS RESERVED AND THE SECOND BYTE DEFINES * 03730000 * WHETHER THE FONT IS ITALIC, DOUBLE STRIKE, BOLD, OR DOUBLE WIDE.@03C* 03740000 *********************************************************************** 03750000 ENTRY APSCS64X DO NOT REMOVE/CHANGE 03760000 APSCS64X DS 0D DO NOT REMOVE/CHANGE 03770000 DC CL8'C0L00BOA',XL2'0003',XL2'0000' OCR-B @03P 03780000 DC CL8'C0S0CR10',XL2'000B',XL2'0000' COURIER 10 @03P 03790000 DC CL8'C0S0CB10',XL2'002E',XL2'0000' COURIER BOLD 10 @03P 03800000 DC CL8'C0S0CI10',XL2'0012',XL2'0000' COURIER ITAL 10 @03P 03810000 DC CL8'C0L00AOA',XL2'0013',XL2'0000' OCR-A @03P 03820000 DC CL8'C0L0KATA',XL2'001A',XL2'0000' KATAKANA @03P 03830000 DC CL8'C0S0AE10',XL2'001A',XL2'0000' APL 10 @03P 03840000 DC CL8'C0D0GT10',XL2'001A',XL2'0000' GOTHIC TEXT 10 @03P 03850000 DC CL8'C0D0GB10',XL2'001A',XL2'0002' GOTHIC BOLD 10 @03P 03860000 DC CL8'C0S0CR12',XL2'0055',XL2'0000' COURIER 12 @03P 03870000 DC CL8'C0S0CB12',XL2'006C',XL2'0000' COURIER BOLD 12 @03P 03880000 DC CL8'C0S0LB12',XL2'006E',XL2'0000' LET GOTH BOLD 12 @03A 03890000 DC CL8'C0S0CI12',XL2'0055',XL2'0008' COURIER ITAL 12 @03P 03900000 DC CL8'C0D0GT12',XL2'0057',XL2'0000' GOTHIC TEXT 12 @03P 03910000 DC CL8'C0D0GB12',XL2'0057',XL2'0002' GOTHIC BOLD 12 @03P 03920000 DC CL8'C0D0GI12',XL2'0057',XL2'0008' GOTHIC ITALIC 12 @03P 03930000 DC CL8'C0S0ESTR',XL2'00A0',XL2'0000' ESSAY @03P 03940000 DC CL8'C0S0EBTR',XL2'00A3',XL2'0000' ESSAY BOLD @03P 03950000 DC CL8'C0S0EITR',XL2'00A2',XL2'0000' ESSAY ITALIC @03P 03960000 DC CL8'C0D0GT13',XL2'00CC',XL2'0000' GOTHIC TEXT 13 @03A 03970000 DC CL8'C0S0D224',XL2'00CC',XL2'0000' GOTHIC TEXT 13 @03P 03980000 DC CL8'C0S0D225',XL2'00CC',XL2'0000' GOTHIC TEXT 13 @03P 03990000 DC CL8'C0S0D226',XL2'00CC',XL2'0002' GOTHIC BOLD 13 @03P 04000000 DC CL8'C0S0D227',XL2'00CC',XL2'0008' GOTHIC ITAL 13 @03P 04010000 DC CL8'C0D0GT15',XL2'00DE',XL2'0000' GOTHIC TEXT 15 @03P 04020000 DC CL8'C0S0CR15',XL2'00DF',XL2'0000' COURIER 15 @03P 04030000 DC CL8'C0S0CB15',XL2'00DF',XL2'0002' COURIER BOLD 15 @03P 04040000 DC CL8'C0S0CI15',XL2'00DF',XL2'0008' COURIER ITAL 15 @03P 04050000 DC CL8'C0S0CD15',XL2'00DF',XL2'0001' COUR DBL-WID 15 @03P 04060000 DC CL8'C0S0CW15',XL2'00DF',XL2'0009' COUR DBL-WID ITAL@03P 04070000 DC CL8'C0D0GT18',XL2'0102',XL2'0000' GOTHIC TEXT 18 @03A 04080000 DC CL8'FFFFFFFF',XL2'FFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 04090000 *********************************************************************** 04100000 * THE FOLLOWING IS THE CODE PAGE TABLE FOR THE 64XX PRINTER. THE FIRST* 04110000 * EIGHT (8) BYTES OF EACH ENTRY IS THE NAME OF THE CODE PAGE. THE * 04120000 * NEXT TWO (2) BYTE FIELD IS THE GLOBAL ID OF THE CORRESPONDING * 04130000 * RESIDENT CODE PAGE. @03C* 04140000 *********************************************************************** 04150000 ENTRY APSCP64X DO NOT REMOVE/CHANGE 04160000 APSCP64X DS 0D DO NOT REMOVE/CHANGE 04170000 DC CL8'T1D0BASE',XL2'03EA' CODE PAGE 1002 @03P 04180000 DC CL8'T1L038BA',XL2'03EA' CODE PAGE 1002 @03P 04190000 DC CL8'T1GDP256',XL2'0100' CODE PAGE 256 @03A 04200000 DC CL8'T1V10037',XL2'0025' CODE PAGE 37 @03P 04210000 DC CL8'T1V10273',XL2'0111' CODE PAGE 273 @03P 04220000 DC CL8'T1V10274',XL2'0112' CODE PAGE 274 @03P 04230000 DC CL8'T1V10275',XL2'0113' CODE PAGE 275 @03P 04240000 DC CL8'T1V10277',XL2'0115' CODE PAGE 277 @03P 04250000 DC CL8'T1V10278',XL2'0116' CODE PAGE 278 @03P 04260000 DC CL8'T1V10280',XL2'0118' CODE PAGE 280 @03P 04270000 DC CL8'T1V10281',XL2'0119' CODE PAGE 281 @03P 04280000 DC CL8'T1V10282',XL2'011A' CODE PAGE 282 @03P 04290000 DC CL8'T1V10284',XL2'011C' CODE PAGE 284 @03P 04300000 DC CL8'T1V10285',XL2'011D' CODE PAGE 285 @03P 04310000 DC CL8'T1000290',XL2'0122' CODE PAGE 290 @03P 04320000 DC CL8'T1L02773',XL2'0122' CODE PAGE 290 SUB@03P 04330000 DC CL8'T1L02774',XL2'0122' CODE PAGE 290 SUB@03P 04340000 DC CL8'T1S0AE10',XL2'0125' CODE PAGE 293 @03P 04350000 DC CL8'T1V10297',XL2'0129' CODE PAGE 297 @03P 04360000 DC CL8'T1000310',XL2'0136' CODE PAGE 310 @03P 04370000 DC CL8'T1000420',XL2'01A4' CODE PAGE 420 @03P 04380000 DC CL8'T1000423',XL2'01A7' CODE PAGE 423 @03P 04390000 DC CL8'T1000424',XL2'01A8' CODE PAGE 424 @03P 04400000 DC CL8'T1V10500',XL2'01F4' CODE PAGE 500 @03P 04410000 DC CL8'T1000803',XL2'0323' CODE PAGE 803 @03A 04420000 DC CL8'T1000838',XL2'0346' CODE PAGE 838 @03P 04430000 DC CL8'T1000870',XL2'0366' CODE PAGE 870 @03P 04440000 DC CL8'T1V10871',XL2'0367' CODE PAGE 871 @03P 04450000 DC CL8'T1000875',XL2'036B' CODE PAGE 875 @03A 04460000 DC CL8'T1000880',XL2'0370' CODE PAGE 880 @03A 04470000 DC CL8'T1000892',XL2'037C' CODE PAGE 892 @03P 04480000 DC CL8'T1L0OCR1',XL2'037C' CODE PAGE 892 @03P 04490000 DC CL8'T1000893',XL2'037D' CODE PAGE 893 @03A 04500000 DC CL8'T1L0OCRB',XL2'037D' CODE PAGE 893 @03P 04510000 DC CL8'T1000905',XL2'0389' CODE PAGE 905 @03A 04520000 DC CL8'T1L00924',XL2'039C' CODE PAGE 924 @05A 04525000 DC CL8'T1001025',XL2'0401' CODE PAGE 1025 @03A 04530000 DC CL8'T1001026',XL2'0402' CODE PAGE 1026 @03A 04540000 DC CL8'T1001140',XL2'0474' CODE PAGE 1140 @05A 04540900 DC CL8'T1001141',XL2'0475' CODE PAGE 1141 @05A 04541800 DC CL8'T1001142',XL2'0476' CODE PAGE 1142 @05A 04542700 DC CL8'T1001143',XL2'0477' CODE PAGE 1143 @05A 04543600 DC CL8'T1001144',XL2'0478' CODE PAGE 1144 @05A 04544500 DC CL8'T1001145',XL2'0479' CODE PAGE 1145 @05A 04545400 DC CL8'T1001146',XL2'047A' CODE PAGE 1146 @05A 04546300 DC CL8'T1001147',XL2'047B' CODE PAGE 1147 @05A 04547200 DC CL8'T1001148',XL2'047C' CODE PAGE 1148 @05A 04548100 DC CL8'T1001149',XL2'047D' CODE PAGE 1149 @05A 04549000 DC CL8'FFFFFFFF',XL2'FFFF' DO NOT REMOVE/CHANGE 04550000 END APSRFTBL DO NOT REMOVE/CHANGE 04560000