**** START OF SPECIFICATIONS ***************************************** * * **** MODULE NAME = APSGDGN3 * * * **** COMP(APS) PROD(PSF) : RELEASE 3.3.0 * * * **** DESCRIPTIVE NAME = PSF FOR OS/390 & z/OS DIAGNOSIS UPDATES * * * **** STATUS = VERSION 3, RELEASE 3, LEVEL 0 * * * **** FUNCTION = * * * * THIS MODULE CONTAINS ALL OF THE UPDATES TO THE PSF FOR * * OS/390 & z/OS DIAGNOSIS SINCE THE LAST PUBLISHED VERSION OF THE * * MANUAL. * * * * THE UPDATES ARE PUT IN THE SAME FORMAT AS THEY WERE BEING * * PUT IN THE DOC ++HOLDS. * * * * EACH TIME A NEW APAR HAS UPDATES THE CHANGE ACTIVITY WILL * * BE UPDATED AND A NEW SECTION WILL BE ADDED TO THE END OF THIS * * MODULE PRECEDED BY A LINE THAT DENOTES THE APAR NUMBER. * * * * DO NOT GO PAST COLUMN 64 WITH YOUR DOC CHANGES. THE END OF * * THE DASHED LINES WITH YOUR APAR NUMBER IN THE TEXT INDICATE * * COLUMN 64. * * * **** RESTRICTIONS * * * * DO NOT EDIT OR UPDATE THIS FILE ON SAMPLIB AS THE * * NEXT APAR THAT CHANGES THIS MODULE WILL DO A TOTAL REPLACE * * OF IT THUS OVERLAYING YOUR CHANGES. IF YOU WISH TO MAKE * * CHANGES TO THIS MODULE THEN DO IT IN YOUR OWN COPY OF THIS * * MODULE. * * * * *** CHANGE ACTIVITY = * * $B0=LAPS0009, HPRF330,020131,BDKURLD: Initial version * * $01=OW53285, HPRF330,020131,BDKURLD: Rollup d-apar * * $02=OW54452, HPRF330,020430,BDKURLD: Add message for exit 07 * 00400000 * changing AFPSTATS parameter * 00410000 * $03=OW54627, HPRF330,020508,BDKURLD: Add ERRNO to APS6501I * 00400000 * $EY=OW52748, HPRF330,020521,BDKUEAS: Medium Level Finishing * 00400000 * $04=OW54885, HPRF330,020523,BDKUEAS: MFCC AE - no change * 00400000 * * **** END OF SPECIFICATIONS ******************************************* All of the following changes are for the PSF for OS/390 & z/OS Diagnosis (G544-5623-03). -----------CHANGES FOR OW53285---------------------------------- 1. On pages 33 and 34 add the following to the end of entries "INITIALIZING TCP/IP", "TERMINATING TCP/IP", "TCP/IP INTERFACE CONNECTED", "PRINTER CONNECTED", "PRINTER IN SESSION", "CLOSE", "GETHOSTBYNAME", "INITAPI", "IOCTL", "RECV", "SELECT WRITE", "SEND", "SETSOCKOPT", "SHUTDOWN", "SOCKET", and "TERMAPI" in Table 9 "TCP/IP Status, Sub-Status, and Pending Command Descriptions". See NOTE. 2. On page 34 add the following note after Table 9. Note: If this problem is only occurring on one TCP/IP-attached printer, then this problem is most likely a printer problem. If this problem is occurring on all or multiple TCP/IP-attached printers, then contact your TCP/IP Administrator because the problem is most likely a problem with TCP/IP. 3. Add the following new messages to the Message-to-Module cross-reference table: APS1500I APSDDOC APS1501I APSDDOC APS2058I APRMSGEX APS2059I APRMSGEX 4. Add the following new reason codes to the PSF Reason Codes table: X'08140277' Printer or input bin number specified APRMSGEX for duplex cannot handle duplex X'08140278' Input bin number cannot be found or is APRMSGEX disabled 5. Remove the following reason code from the PSF Reason Codes table: X'08140363' An attribute XMD pointer value will APRMSGEX casue an infinite loop. 6. Add the following text to page 104 before "Printer Information from ..." PSF Printer Information Report - 3.3.0 LEVEL 0000 7. Add the following on page 112 before the line beginning with "HEADING Printer Information ..." REPORTLVL PRTINFO 3.3.0 0000 PSF Printer Information Report 8. Add the following section to page 120 after the Heading section but before the DateTime record section. ================================================================== The Report Level record contains the information relevant to uniquely identify the report's format. OFFSET OFFSET DECIMAL HEX TYPE LENGTH DESCRIPTION ======== ======== ========= ======== ========================== 0 (0) CHARACTER 10 Layout ID value: REPORTLVL 10 (A) CHARACTER 1 Column Separator 11 (B) CHARACTER 8 Report Identifier 19 (13) CHARACTER 1 Column Separator 20 (14) CHARACTER 8 PSF version, release, and modification 28 (1C) CHARACTER 1 Column Separator 29 (1D) CHARACTER 4 Report Level Identifier 33 (21) CHARACTER 1 Column Separator 34 (22) CHARACTER 30 Report Description 9. Add the following text on page 132 after "APS6508I PRTINFO ..." REPORTLVL PRTINFO 3.3.0 0000 PSF Printer Information Report 10. Remove the following message from the Message-to-Module cross-reference table: APS2043I APRMSGEX -----------CHANGES FOR OW54452---------------------------------- 1. Add the following to Table 13: "Message-to-Module Cross-Reference". APS7004I APSUREXT -----------CHANGES FOR OW54627---------------------------------- 1. Add the following to the "Message-to-Module Cross-Reference" table. APS6510I APSCSNA -----------CHANGES FOR OW52748---------------------------------- 1. Add the following to Table 13: "Message-to-Module Cross-Reference". APS083I APSPPDVP