**** START OF SPECIFICATIONS ***************************************** 00010000 * * 00020000 **** MODULE NAME = APSGCUS3 * 00030000 * * 00040000 * COMP(APS) PROD(PSF) : RELEASE 3.3.0 * 00050000 * * 00060000 **** DESCRIPTIVE NAME = PSF FOR OS/390 & z/OS CUSTOMIZATION UPDATES * 00070000 * * 00080000 **** STATUS = VERSION 3, RELEASE 3, LEVEL 0 * 00090000 * * 00100000 **** FUNCTION = * 00110000 * * 00120000 * THIS MODULE CONTAINS ALL OF THE UPDATES TO THE PSF FOR * 00130000 * OS/390 & z/OS CUSTOMIZATION SINCE THE LAST PUBLISHED VERSION * 00140000 * OF THE MANUAL. * 00150000 * * 00160000 * THE UPDATES ARE PUT IN THE SAME FORMAT AS THEY WERE BEING * 00170000 * PUT IN THE DOC ++HOLDS. * 00180000 * * 00190000 * EACH TIME A NEW APAR HAS UPDATES THE CHANGE ACTIVITY WILL * 00200000 * BE UPDATED AND A NEW SECTION WILL BE ADDED TO THE END OF * 00210000 * THIS MODULE PRECEDED BY A LINE THAT DENOTES THE APAR NUMBER. * 00220000 * * 00230000 **** RESTRICTIONS * 00240000 * * 00250000 * DO NOT EDIT OR UPDATE THIS FILE ON SAMPLIB AS THE * 00260000 * NEXT APAR THAT CHANGES THIS MODULE WILL DO A TOTAL REPLACE * 00270000 * OF IT THUS OVERLAYING YOUR CHANGES. IF YOU WISH TO MAKE * 00280000 * CHANGES TO THIS MODULE THEN DO IT IN YOUR OWN COPY OF THIS * 00290000 * MODULE. * 00300000 * * 00310000 * *** CHANGE ACTIVITY = * 00320000 * $B0=LAPS0009,HPRF330,020131,BDKURLD: Initial Version * 00330000 * $01=OW53285, HPRF330,020131,BDKURLD: Rollup d-apar * 00340000 * $02=OW53830 ,HPRF330,020403,BDKUMLC: No NPRO with DISCINTV * 00350000 * $03=OW55219, HPRF320,020625,BDKUPG: Side and Edge Sensitivity * 00360000 * support in Printer Inventory * 00370000 * * 00380000 **** END OF SPECIFICATIONS ******************************************* 00390000 00400000 All of the following changes are for the PSF for 00410000 OS/390 & z/OS Customization (S544-5622-03). 00420000 00430000 -----------CHANGES FOR OW53285---------------------------------- 00440000 00450000 1. Add a new chapter entitled, "Side and Edge Sensitive Paper 00460000 Handling", and use the text below for the new chapter. 00470000 00480000 You can use the Side and Edge Sensitive Paper Handling function in 00490000 PSF to support side and edge sensitive paper on printers that do not 00500000 have native side and edge sensitive paper support. 00510000 The function also provides improved performance for printers 00520000 that do have this support. 00530000 00540000 Add a section titled, "Understanding Side and Edge Sensitive Paper". 00550000 00560000 Side sensitive paper (for example, letterhead) has a defined front 00570000 and back. Edge sensitive paper (for example, prepunched) has a 00580000 defined edge where the holes are located. 00590000 00600000 For side sensitive paper, applications are coded with respect to 00610000 the front and back of the form. For edge sensitive paper, 00620000 applications are coded with respect to a particular edge. 00630000 00640000 Add a section titled, "Existing Support for Side Sensitive Paper". 00650000 00660000 Many cut-sheet printers require that side sensitive paper 00670000 (letterhead) be loaded one way for simplex (usually front-side 00680000 down) and another way for duplex (usually front-side up). This 00690000 requires either: 00700000 00710000 - Manual operator intervention to reload the tray (also called 00720000 bin) between simplex and duplex jobs. 00730000 00740000 - Two trays that are loaded, one for simplex and the other for 00750000 duplex. The application is coded to select the proper tray. 00760000 00770000 More sophisticated cut-sheet printers have support for side 00780000 sensitive paper. The paper trays have a configuration setting for 00790000 side sensitive paper, and the output prints properly for both simplex00800000 and duplex. However, the output prints by using the duplex paper 00810000 path for both simplex output and duplex output, which cuts simplex 00820000 throughput in half. 00830000 00840000 Add a section titled, "Existing Support for Edge Sensitive Paper". 00850000 00860000 In addition to the requirements for side sensitive paper, many 00870000 cut-sheet printers also require edge sensitive paper (prepunched) to 00880000 be loaded differently for simplex and duplex. This is common for 00890000 printers where the holes are on the leading or trailing edge as the 00900000 paper moves through the printer. The paper is loaded with the holes 00910000 either on the leading or trailing edge for simplex and rotated 180 00920000 degrees for duplex. This requires either: 00930000 00940000 - Manual operator intervention to reload the tray between simplex 00950000 and duplex jobs. 00960000 00970000 - Two trays that are loaded one for simplex and the other for 00980000 duplex. The application is coded to select the proper tray. 00990000 01000000 More sophisticated cut-sheet printers have support for edge 01010000 sensitive paper. The paper trays have a configuration setting for 01020000 edge sensitive paper, and the output prints properly for both 01030000 simplex and duplex. Also, the holes are stacked on the same side in 01040000 the stacker. However, the output prints by using the duplex paper 01050000 path for both simplex output and duplex output, which cuts simplex 01060000 throughput in half. 01070000 01080000 Add a section titled, "Migration Problem with Side and Edge 01090000 Sensitive Paper Handling". 01100000 01110000 When applications that have been printing on printers with side and 01120000 edge sensitive support are moved to printers that do not have this 01130000 support, you will encounter a migration problem. For example, the 01140000 printer you are migrating from had prepunched paper loaded into Tray 01150000 1 and some applications printed simplex and others duplex. For the 01160000 new printer, the only automatic way to provide simplex and duplex 01170000 support is to use two trays, where Tray 1 is loaded for simplex and 01180000 Tray 2 for duplex. Unfortunately, all of the duplex applications use 01190000 form definitions that are coded for Tray 1. You can modify the form 01200000 definitions to use Tray 2, but this might not be practical if many 01210000 form definitions are affected. The next section describes how PSF 01220000 handles this situation. 01230000 01240000 Add a section titled, "Side and Edge Sensitive Paper Handling 01250000 Support in PSF with Exit 7". 01260000 01270000 PSF is able to select different input paper trays (bins) for simplex 01280000 and duplex, regardless of the bin specified in the form definition 01290000 or in the JCL on the OUTPUT statement (INTRAY=). 01300000 This function is activated by setting the XTP7SENS flag in 01310000 installation Exit 7. Up to four different application bin values 01320000 can be mapped to real printer bins for simplex and duplex. 01330000 01340000 The print application specifies a form definition that contains one 01350000 or more copy groups. In each copy group, an input bin number is 01360000 specified that identifies which input paper bin is to be used. 01370000 01380000 Exit 7 has fields that map the input bin number to two real 01390000 printer bins, one for simplex and one for duplex. The input bin 01400000 number is coded in field XTP7BINA, the real simplex bin is coded in 01410000 field XTP7SIMA, and the real duplex bin is coded in field XTP7DUPA. 01420000 01430000 For example, if an application is coded to use edge sensitive 01440000 paper from Bin 1, you can use the Side and Edge Sensitive Paper 01450000 Handling function to use real printer Bin 1 for simplex and real 01460000 printer Bin 2 for duplex. You would then code in installation Exit 01470000 7: 01480000 01490000 - XTP7BINA = 1 (application/form definition bin number) 01500000 - XTP7SIMA = 1 (real bin number for simplex) 01510000 - XTP7DUPA = 2 (real bin number for duplex) 01520000 01530000 When the application requests simplex printing from Bin 1, PSF tells 01540000 the printer to use real Bin 1. When the application requests duplex 01550000 printing from Bin 1, PSF tells the printer to use real Bin 2. 01560000 01570000 Up to four logical bins can be remapped with these fields: 01580000 01590000 XPT7BINA XPT7BINB XTP7BINC XTP7BIND 01600000 XPT7SIMA XPT7SIMB XTP7SIMC XTP7SIMD 01610000 XPT7DUPA XPT7DUPB XTP7DUPC XTP7DUPD 01620000 01630000 The logical sets are identified with a common suffix letter. Sample 01640000 installation exits APSUX07V and APSUC07V can be modified to set any 01650000 of these fields. 01660000 01670000 For printers with native side and edge sensitive paper support, 01680000 you should consider using the support in PSF to achieve better 01690000 performance, if the printer has enough trays. 01700000 01710000 2. On page 255 change the last entry in Figure 79 "Format of 01720000 Exit-Communication Area Extension, APSUECE" from: 01730000 01740000 240 (F0) Character 24 * Reserved 01750000 01760000 to: 01770000 01780000 240 (F0) CHARACTER 8 ECEFSSNM FSS name (writer proc name) 01790000 248 (F8) CHARACTER 16 * Reserved 01800000 01810000 3. On page 417 at the bottom of Figure 97 change offset 196 (C4) 01820000 and offset 197 (C5) to read as follows. 01830000 01840000 196 (C4) CHARACTER 12 XTP7BINS SIDE AND EDGE SENSITIVITY BINS 01850000 196 (C4) UNSIGNED 1 XTP7BINA FIRST BIN 01860000 197 (C5) UNSIGNED 1 XTP7SIMA FIRST SIMPLEX BIN 01870000 198 (C6) UNSIGNED 1 XTP7DUPA FIRST DUPLEX BIN 01880000 199 (C7) UNSIGNED 1 XTP7BINB SECOND BIN 01890000 200 (C8) UNSIGNED 1 XTP7SIMB SECOND SIMPLEX BIN 01900000 201 (C9) UNSIGNED 1 XTP7DUPB SECOND DUPLEX BIN 01910000 202 (CA) UNSIGNED 1 XTP7BINC THIRD BIN 01920000 203 (CB) UNSIGNED 1 XTP7SIMC THIRD SIMPLEX BIN 01930000 204 (CC) UNSIGNED 1 XTP7DUPC THIRD DUPLEX BIN 01940000 205 (CD) UNSIGNED 1 XTP7BIND FOURTH BIN 01950000 206 (CE) UNSIGNED 1 XTP7SIMD FOURTH SIMPLEX BIN 01960000 207 (CF) UNSIGNED 1 XTP7DUPD FOURTH DUPLEX BIN 01970000 208 (D0) CHARACTER 1 XTP7MFG2 MORE RESPONSE FLAGS 01980000 1... .... XTP7ASAP AFP STATISTICS ABOUT THE PRINT 01990000 FILE (VALID ONLY ON THE BDS 02000000 CALL "XTP7BDS") 02010000 0 = DO NOT GATHER AFP STATISTICS02020000 FOR THIS DATA SET (PRINT 02030000 FILE) 02040000 1 = GATHER AFP STATISTICS FOR 02050000 THIS PRINT FILE 02060000 .1.. .... XTP7SENS SIDE AND EDGE SENSITIVITY FLAG 02070000 (VALID ONLY ON INIT CALL 02080000 "XTP7INIT") 02090000 0 = DO NOT USE SIDE AND EDGE 02100000 SENSITIVITY 02110000 1 - ACTIVATE SIDE AND EDGE 02120000 SENSITIVITY 02130000 ..11 1111 RESERVED 02140000 209 (D1) CHARACTER 24 * RESERVED 02150000 02160000 4. On page 427 add the following after XTP7DRES. 02170000 02180000 XTP7BINS 02190000 A list of possible input bins, mapped from the logical bins, that 02200000 might contain side or edge sensitive paper. 02210000 02220000 XTP7BINA 02230000 First bin that contains side or edge sensitive paper. Once 02240000 set, this field remains set between calls. 02250000 02260000 XTP7SIMA 02270000 First bin that contains simplex side or edge sensitive paper. 02280000 Once set, this field remains set between calls. 02290000 02300000 XTP7DUPA 02310000 First bin that contains duplex side or edge sensitive paper. 02320000 Once set, this field remains set between calls. 02330000 02340000 XTP7BINB 02350000 Second bin that contains side or edge sensitive paper. Once 02360000 set, this field remains set between calls. 02370000 02380000 XTP7SIMB 02390000 Second bin that contains simplex side or edge sensitive paper. 02400000 Once set, this field remains set between calls. 02410000 02420000 XTP7DUPB 02430000 Second bin that contains duplex side or edge sensitive paper. 02440000 Once set, this field remains set between calls. 02450000 02460000 XTP7BINC 02470000 Third bin that contains side or edge sensitive paper. Once 02480000 set, this field remains set between calls. 02490000 02500000 XTP7SIMC 02510000 Third bin that contains simplex side or edge sensitive paper. 02520000 Once set, this field remains set between calls. 02530000 02540000 XTP7DUPC 02550000 Third bin that contains duplex side or edge sensitive paper. 02560000 Once set, this field remains set between calls. 02570000 02580000 XTP7BIND 02590000 Fourth bin that contains side or edge sensitive paper. Once 02600000 set, this field remains set between calls. 02610000 02620000 XTP7SIMD 02630000 Fourth bin that contains simplex side or edge sensitive paper. 02640000 Once set, this field remains set between calls. 02650000 02660000 XTP7DUPD 02670000 Fourth bin that contains duplex side or edge sensitive paper. 02680000 Once set, this field remains set between calls. 02690000 02700000 5. On page 427 replace the description of XTP7ASAP. 02710000 02720000 XTP7ASAP 02730000 This option can only be set during the BDSC. PSF sets 02740000 this flag to B'0' when this data set (print file) has 02750000 not requested an AFP Statistics report or sets this 02760000 bit to B'1' when this data set has requested an AFP 02770000 Statistics report. Exit 7 may change this setting for 02780000 XTP7ASAP, thereby overriding the request as indicated 02790000 by the data set. PSF performs AFP Statistics gathering 02800000 based on the setting of this bit after the BDSC call. 02810000 See "Obtaining Data about Print File Resources" on 02820000 page 193. 02830000 02840000 6. On page 427 add the following after XTP7ASAP. 02850000 02860000 XTP7SENS 02870000 This option can be set during the INIT call and it remains02880000 set between calls. PSF initially sets this flag to B'0' 02890000 to indicate that PSF does not use the side and edge 02900000 sensitive paper handling function. If Exit 7 set 02910000 this flag to B'1', PSF activates the side and edge 02920000 sensitive paper handling function. 02930000 02940000 7. On page 441 add the following to the table after XTP7DRES. 02950000 02960000 INIT 02970000 02980000 XTP7BINA IO 02990000 XTP7SIMA IO 03000000 XTP7DUPA IO 03010000 XTP7BINB IO 03020000 XTP7SIMB IO 03030000 XTP7DUPB IO 03040000 XTP7BINC IO 03050000 XTP7SIMC IO 03060000 XTP7DUPC IO 03070000 XTP7BIND IO 03080000 XTP7SIMD IO 03090000 XTP7DUPD IO 03100000 03110000 8. On page 441 add the following to the table after XTP7ASAP. 03120000 03130000 XTP7SENS IO 03140000 03150000 03160000 -----------CHANGES FOR OW53830---------------------------------- 03170000 03180000 1. On page 75, Table 2, under the Description column, change 03190000 the second and third sentence in the first paragraph to read: 03200000 03210000 "... from JES for this time period, PSF issues a message and 03220000 ends the session with the printer. If the JES NPRO parameter 03230000 is nonzero, PSF forces all pages from the last job to reach 03240000 the ... job to be purged from the spool." 03250000 03260000 2. On page 75, Table 2, Description column, after the first 03270000 paragraph, add the following paragraph: 03280000 03290000 "If the JES NPRO parameter is zero, PSF does not force 03300000 all the pages of the last job to the stacker, but issues a 03310000 message and ends the session. To force all the pages of the 03320000 last job to the stacker, send another print job to the 03330000 printer or stop the PSF FSA." 03340000 03350000 3. On page 117, under the NPRO parameter, add the following 03360000 paragraph after the last paragraph: 03370000 03380000 "If NPRO=0 and the PSF DISCINTV parameter is being used, PSF 03390000 does not force all the pages of the last job to the stacker 03400000 when the DISCINTV timer expires. Specify a non-zero NPRO 03410000 value to force the last pages of the last job to the stacker 03420000 when the DISCINTV timer expires. For more information, see 03430000 the DISCINTV parameter in Table 2 on page 75." 03440000 03450000 4. On page 123, under the NPRO parameter, add the following 03460000 paragraph after the last paragraph: 03470000 03480000 "If NPRO=0 and the PSF DISCINTV parameter is being used, PSF 03490000 does not force all the pages of the last job to the stacker 03500000 when the DISCINTV timer expires. Specify a non-zero NPRO 03510000 value to force the last pages of the last job to the stacker 03520000 when the DISCINTV timer expires. For more information, see 03530000 the DISCINTV parameter in Table 2 on page 75." 03540000 03550000 -----------CHANGES FOR OW55219---------------------------------- 03560000 1. In the new "Side and Edge Sensitive Paper Handling" chapter 03570000 (added by APAR OW53285), add a section titled 03580000 "Side and Edge Sensitive Paper Handling Support 03590000 with the Printer Inventory" after the section titled "Side and 03600000 Edge Sensitve Paper Handling Support in PSF with Exit 7". 03610000 03620000 PSF is able to select different input paper trays (bins) for 03630000 simplex and duplex by using the Printer Inventory. This function is 03640000 activated when tray values are specified in the Printer 03650000 Inventory. Up to four different application tray values can be mapped 03660000 to real printer trays for simplex and duplex. 03670000 03680000 The print application specifies a form definition that contains one 03690000 or more copy groups. In each copy group, an input tray number is 03700000 specified that identifies which input paper tray is to be used. 03710000 03720000 The Printer Inventory has parameters that map the input tray number 03730000 (source tray) to two real printer trays (substitution trays), 03740000 one for simplex and one for duplex. You can specify the source tray 03750000 number, the simplex substitution tray, and the duplex substitution 03760000 tray in the Printer Inventory by using the Infoprint 03770000 Server ISPF panels or the Printer Inventory Definition Utility 03780000 (PIDU). 03790000 03800000 To specify the tray values with the ISPF Printer Inventory panels, 03810000 you use the Input Tray Substitution parameter. 03820000 03830000 To specify the tray values with the PIDU statement, you use the 03840000 tray_substitutions parameter. 03850000 03860000 For example, if an application is coded to 03870000 use edge sensitive paper from Tray 1, you can use the Side and Edge 03880000 Sensitive Paper Handling function to use Substitution Tray 1 for 03890000 simplex and Substitution Tray 2 for duplex. To do this, use one 03900000 of these parameters: 03910000 03920000 * PIDU: 03930000 03940000 tray_substitutions={1->{1 2}} 03950000 03960000 Note: Braces must be entered as shown and do not indicate an 03970000 alternative value. 03980000 03990000 * ISPF panel: 04000000 04010000 Input Tray Substitution: 04020000 Source Substitution tray: 04030000 tray: simplex duplex 04040000 _1_ _1_ _2_ 04050000 04060000 When the application requests simplex printing from Tray 1, PSF tells 04070000 the printer to use Substitution Tray 1. When the application requests 04080000 duplex printing from Tray 1, PSF tells the printer to use Substitution 04090000 Tray 2. 04100000 04110000 To specify multiple tray values, use one of these parameters: 04120000 04130000 * PIDU: 04140000 04150000 tray_substitutions={1->{1 2}2->{3 4}3->{1 4}} 04160000 04170000 Note: Braces must be entered as shown and do not indicate an 04180000 alternative value. 04190000 04200000 * ISPF panel: 04210000 04220000 Input Tray Substitution: 04230000 Source Substitution tray: 04240000 tray: simplex duplex 04250000 _1_ _1_ _2_ 04260000 _2_ _3_ _4_ 04270000 _3_ _1_ _4_ 04280000 04290000 These examples map Source Tray 1 to Substitution Tray 1 for simplex 04300000 and Substitution Tray 2 for duplex. Source Tray 2 is mapped to 04310000 Substitution Tray 3 for simplex and Substitution Tray 4 for duplex. 04320000 Source Tray 3 is mapped to Substitution Tray 1 for simplex and 04330000 Substitution Tray 4 for duplex. 04340000 04350000 For printers with native side and edge sensitive paper support, 04360000 you should consider using the support in PSF to achieve better 04370000 performance, if the printer has enough trays. 04380000 04390000 2. On Figure 32. "Sample ISPF Printer Inventory Panel (Page 2 of 3)" 04400000 on page 64, add the following fields to the ISPF panel after the 04410000 Retained Resource Counts fields: 04420000 04430000 Input Tray Substitution: 04440000 Source Substitution tray: 04450000 tray: simplex duplex 04460000 ___ ___ ___ 04470000 ___ ___ ___ 04480000 ___ ___ ___ 04490000 ___ ___ ___ 04500000 04510000 3. On Table 2 "Printer Inventory Parameters Compared to ...", 04520000 add the following table entries on page 66 to describe this new Printer 04530000 Inventory parameter. 04540000 04550000 _________________________________________________________ 04560000 Input Tray Substitution: | tray_substitutions | XTP7BINA | 04570000 Source tray | | XTP7BINB | 04580000 | Syntax: {source1-> | XTP7BINC | 04590000 | {subsim1 subdup1}} | XTP7BIND | 04600000 | | XTP7SENS | 04610000 _________________________|____________________|__________|_________ 04620000 Specifies the mappings for bins for Side and Edge | 04630000 Sensitivity. | 04640000 | 04650000 Values: 1 to 255 | 04660000 | 04670000 Note: Refer to the "Side and Edge Sensitive Paper Handling" | 04680000 chapter for more information about Side and Edge Sensitivity and | 04690000 for information about how to use these parameters. | 04700000 __________________________________________________________________| 04710000 04720000 _________________________________________________________ 04730000 Input Tray Substitution: | tray_substitutions | XTP7SIMA | 04740000 Substitution tray: | | XTP7SIMB | 04750000 Simplex | Syntax: {source1-> | XTP7SIMC | 04760000 | {subsim1 subdup1}} | XTP7SIMD | 04770000 | | XTP7SENS | 04780000 _________________________|____________________|__________|_________ 04790000 Specifies the mappings for bins for Side and Edge | 04800000 Sensitivity. | 04810000 | 04820000 Values: 1 to 255 | 04830000 | 04840000 Note: Refer to the "Side and Edge Sensitive Paper Handling" | 04850000 chapter for more information about Side and Edge Sensitivity and | 04860000 for information about how to use these parameters. | 04870000 __________________________________________________________________| 04880000 04890000 _________________________________________________________ 04900000 Input Tray Substitution: | tray_substitutions | XTP7DUPA | 04910000 Substitution tray: Duplex| | XTP7DUPB | 04920000 | Syntax: {source1-> | XTP7DUPC | 04930000 | {subsim1 subdup1}} | XTP7DUPD | 04940000 | | XTP7SENS | 04950000 _________________________|____________________|__________|_________ 04960000 Specifies the mappings for bins for Side and Edge | 04970000 Sensitivity. | 04980000 | 04990000 Values: 1 to 255 | 05000000 | 05010000 Note: Refer to the "Side and Edge Sensitive Paper Handling" | 05020000 chapter for more information about Side and Edge Sensitivity and | 05030000 for information about how to use these parameters. | 05040000 __________________________________________________________________| 05050000 05060000 05070000 4. Add the following entries to Table 27 "Options Specified in the 05080000 Printer Inventory" on page 286: 05090000 05100000 Exit 7 |Printer Inventory |Description | 05110000 ________|_______________________|__________________________________| 05120000 XTP7BINA|Input Tray Substitution|Sets the first source tray mapping| 05130000 |Source tray |for Side and Edge Sensitive Paper | 05140000 | |Handling. For more information, | 05150000 | |see "Side and Edge Sensitive Paper| 05160000 | |Handling" on page ?. | 05170000 ________|_______________________|__________________________________| 05180000 XTP7SIMA|Input Tray Substitution|Sets the first substitution | 05190000 |Substitution tray: |simplex tray for Side and Edge | 05200000 |Simplex |Sensitive Paper Handling. For more| 05210000 | |information, see "Side and Edge | 05220000 | |Sensitive Paper Handling" on page | 05230000 | |?. | 05240000 ________|_______________________|__________________________________| 05250000 XTP7DUPA|Input Tray Substitution|Sets the first substitution | 05260000 |Substitution tray: |duplex tray for Side and Edge | 05270000 |Duplex |Sensitive Paper Handling. For more| 05280000 | |information, see "Side and Edge | 05290000 | |Sensitive Paper Handling" on page | 05300000 | |?. | 05310000 ________|_______________________|__________________________________| 05320000 XTP7BINB|Input Tray Substitution|Sets the second source tray | 05330000 |Source tray |mapping for Side and Edge | 05340000 | |Sensitive Handling. For more | 05350000 | |information see "Side and Edge | 05360000 | |Sensitive Paper Handling" on page | 05370000 | |?. | 05380000 ________|_______________________|__________________________________| 05390000 XTP7SIMB|Input Tray Substitution|Sets the second substitution | 05400000 |Substitution tray: |simplex tray for Side and Edge | 05410000 |Simplex |Sensitive Paper Handling. For more| 05420000 | |information, see "Side and Edge | 05430000 | |Sensitive Paper Handling" on page | 05440000 | |?. | 05450000 ________|_______________________|__________________________________| 05460000 XTP7DUPB|Input Tray Substitution|Sets the second substitution | 05470000 |Substitution tray: |duplex tray for Side and Edge | 05480000 |Duplex |Sensitive Paper Handling. For more| 05490000 | |information, see "Side and Edge | 05500000 | |Sensitive Paper Handling" on page | 05510000 | |?. | 05520000 ________|_______________________|__________________________________| 05530000 XTP7BINC|Input Tray Substitution|Sets the third source tray mapping| 05540000 |Source tray |for Side and Edge Sensitive Paper | 05550000 | |Handling. For more information, | 05560000 | |see "Side and Edge Sensitive Paper| 05570000 | |Handling" on page ?. | 05580000 ________|_______________________|__________________________________| 05590000 XTP7SIMC|Input Tray Substitution|Sets the third substitution | 05600000 |Substitution tray: |simplex tray for Side and Edge | 05610000 |Simplex |Sensitive Paper Handling. For more| 05620000 | |information, see "Side and Edge | 05630000 | |Sensitive Paper Handling" on page | 05640000 | |?. | 05650000 ________|_______________________|__________________________________| 05660000 XTP7DUPC|Input Tray Substitution|Sets the third substitution | 05670000 |Substitution tray: |duplex tray for Side and Edge | 05680000 |Duplex |Sensitive Paper Handling. For more| 05690000 | |information, see "Side and Edge | 05700000 | |Sensitive Paper Handling" on page | 05710000 | |?. | 05720000 ________|_______________________|__________________________________| 05730000 XTP7BIND|Input Tray Substitution|Sets the fourth source tray | 05740000 |Source tray |mapping for Side and Edge | 05750000 | |Sensitive Handling. For more | 05760000 | |information see "Side and Edge | 05770000 | |Sensitive Paper Handling" on page | 05780000 | |?. | 05790000 ________|_______________________|__________________________________| 05800000 XTP7SIMD|Input Tray Substitution|Sets the fourth substitution | 05810000 |Substitution tray: |simplex tray for Side and Edge | 05820000 |Simplex |Sensitive Paper Handling. For more| 05830000 | |information, see "Side and Edge | 05840000 | |Sensitive Paper Handling" on page | 05850000 | |?. | 05860000 ________|_______________________|__________________________________| 05870000 XTP7DUPD|Input Tray Substitution|Sets the fourth substitution | 05880000 |Substitution tray: |duplex tray for Side and Edge | 05890000 |Duplex |Sensitive Paper Handling. For more| 05900000 | |information, see "Side and Edge | 05910000 | |Sensitive Paper Handling" on page | 05920000 | |?. | 05930000 ________|_______________________|__________________________________| 05940000 XTP7SENS|Input Tray Substitution|Controls whether to use Side | 05950000 | |and Edge Sensitive Paper | 05960000 | |Handling. For more information, | 05970000 | |see "Side and Edge Sensitive Paper| 05980000 | |Handling" on page ?. | 05990000 ________|_______________________|__________________________________| 06000000