SCRIPT/VS 4.0.0: DEVICE 1403N6 CHARS MONO ¤     Program Directory for  MVS Download  feature of  PSF/MVS  Version 2  Release 2, Modification Level 0   Program Number 5695-040   FMID JPRF225   for Use with  MVS   Document Date: July 1995        xxxx-yyyy-zz ¤   ÚÄÄÄ NOTE! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | Before using this information and the product it supports, be sure |  | to read the general information under "Notices" on page v. |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ            This program directory, dated July 1995, applies to the MVS Download  feature of PSF/MVS Version 2 (MVS Download) Release 2, Modification  Level 0, Program Number 5695-040 for the following:  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ¿ ¿  | FMIDS | FEATURE NUMBERS| SYSTEM NAME |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | JPRF225 | 6090 | MVS |  | | 6091 | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À  A form for reader's comments appears at the back of this publication.  When you send information to IBM, you grant IBM a nonexclusive right  to use or distribute the information in any way it believes  appropriate without incurring any obligation to you.  (C) COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION 1995. ALL  RIGHTS RESERVED.  Note to U.S. Government Users ÄÄ Documentation related to restricted  rights ÄÄ Use, duplication or disclosure is subject to restrictions  set forth in GSA ADP Schedule Contract with IBM Corp. ¤   CONTENTS    NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  Trademarks and Service Marks . . . . . . . . . . . . . . . . . . v  1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 1  1.1 MVS Download Description . . . . . . . . . . . . . . . . . . 2  2.0 PROGRAM MATERIALS . . . . . . . . . . . . . . . . . . . . . 3  2.1 Basic Machine-Readable Material . . . . . . . . . . . . . . 3  2.2 Optional Machine-Readable Material . . . . . . . . . . . . . 4  2.3 Program Publications . . . . . . . . . . . . . . . . . . . . 4  2.3.1 Basic Program Publications . . . . . . . . . . . . . . . 4  2.3.2 Optional Program Publications . . . . . . . . . . . . . 4  2.4 Publications Useful During Installation . . . . . . . . . . 4  3.0 PROGRAM SUPPORT . . . . . . . . . . . . . . . . . . . . . . 6  3.1 Service Instructions . . . . . . . . . . . . . . . . . . . . 6  3.2 Preventive Service Planning . . . . . . . . . . . . . . . . 6  3.3 Statement of Support Procedures . . . . . . . . . . . . . . 6  4.0 PROGRAM AND SERVICE LEVEL INFORMATION . . . . . . . . . . . 7  4.1 Program Level Information . . . . . . . . . . . . . . . . . 7  4.2 Service Level Information . . . . . . . . . . . . . . . . . 7  4.3 Cumulative Service Tape . . . . . . . . . . . . . . . . . . 7  5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS . . . . . . . . 8  5.1 Driving System Requirements . . . . . . . . . . . . . . . . 8  5.1.1 Programming Requirements . . . . . . . . . . . . . . . . 8  5.1.2 DASD Storage Requirements . . . . . . . . . . . . . . . 8  5.2 Target System Requirements . . . . . . . . . . . . . . . . . 8  5.2.1 Operating System Requirements . . . . . . . . . . . . . 8  5.2.2 Machine Requirements . . . . . . . . . . . . . . . . . . 9  5.2.3 Programming Requirements . . . . . . . . . . . . . . . . 9  5.2.4 SMP/E Procedures and Data Sets . . . . . . . . . . . . . 9  5.2.5 DASD Storage Requirements . . . . . . . . . . . . . . . 9  5.2.6 Sample JCL Members . . . . . . . . . . . . . . . . . . . 12  6.0 INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . 13  6.1 Installing MVS Download . . . . . . . . . . . . . . . . . . 13  6.1.1 Load SMP/E Libraries Using RECEIVE . . . . . . . . . . . 14  6.1.2 RECEIVE Cumulative Service Tape, if Applicable . . . . . 15  6.1.3 Perform SMP/E APPLY CHECK . . . . . . . . . . . . . . . 15  6.1.4 Load Target Libraries Using APPLY . . . . . . . . . . . 16  6.1.5 Verify Installation of MVS Download (optional) . . . . . 17  6.1.6 Perform SMP/E ACCEPT CHECK . . . . . . . . . . . . . . . 17  6.1.7 Load Distribution Libraries Using ACCEPT . . . . . . . . 18  6.2 Post-installation Configuration Tasks and IVP . . . . . . . 19  APPENDIX A. MVS DOWNLOAD INSTALL LOGIC . . . . . . . . . . . . . 21   (C) Copyright IBM Corp. 1995 iii ¤   READER'S COMMENTS . . . . . . . . . . . . . . . . . . . . . . . . 23    FIGURES    1. Basic Material: Program Tape . . . . . . . . . . . . . . . . 3  2. Program Tape: File Content . . . . . . . . . . . . . . . . . 3  3. Basic Material: Unlicensed Publications . . . . . . . . . . 4  4. Publications Useful During Installation . . . . . . . . . . 4  5. PSP Upgrade and Subset ID . . . . . . . . . . . . . . . . . 6  6. Component ID . . . . . . . . . . . . . . . . . . . . . . . . 6  7. Abbreviations used for the data set type . . . . . . . . . . 9  8. Storage Requirements for Target Libraries . . . . . . . . . 10  9. Storage Requirements for Distribution Libraries . . . . . . 11  10. Sample SMP/E RECEIVE Job . . . . . . . . . . . . . . . . . . 14  11. RECEIVE Job for Cumulative Service Tape . . . . . . . . . . 15  12. Sample SMP/E APPLY CHECK Job . . . . . . . . . . . . . . . . 16  13. Sample SMP/E APPLY Job . . . . . . . . . . . . . . . . . . . 17  14. Sample SMP/E ACCEPT CHECK Job . . . . . . . . . . . . . . . 18  15. Sample SMP/E ACCEPT Job . . . . . . . . . . . . . . . . . . 18           Contents iv ¤   NOTICES    References in this document to IBM products, programs, or services do  not imply that IBM intends to make these available in all countries in  which IBM operates. Any reference to an IBM product, program, or  service is not intended to state or imply that only IBM's product,  program, or service may be used. Any functionally equivalent product,  program, or service that does not infringe on any of IBM's  intellectual property rights may be used instead of the IBM product,  program, or service. Evaluation and verification of operation in  conjunction with other products, except those expressly designated by  IBM, is the user's responsibility.  IBM may have patents or pending patent applications covering subject  matter in this document. The furnishing of this document does not  give you any license to these patents. You can send license  inquiries, in writing, to the  International Business Machines Corporation  IBM Director of Licensing  500 Columbus Avenue  Thornwood, New York 10594  USA   TRADEMARKS AND SERVICE MARKS  The following terms used in this document are trademarks or service  marks of IBM Corporation in the United States or other countries:  AFP IBMLink PSF/6000  AIX MVS/ESA RETAIN  CBIPO Print Services Facility System/6000  RISC  CBPDO PSF RS/6000  IBM(R)        (C) Copyright IBM Corp. 1995 v ¤   1.0 INTRODUCTION    This program directory is intended for the system programmer  responsible for program installation and maintenance. It contains  information concerning the material and procedures associated with the  installation of MVS Download. You should read all of this program  directory before installing the program and then keep it for future  reference.  The program directory contains the following sections:  ù 2.0, "Program Materials" on page 3 identifies the basic and  optional program materials and documentation for MVS Download.  ù 3.0, "Program Support" on page 6 describes the IBM support  available for MVS Download.  ù 4.0, "Program and Service Level Information" on page 7 lists the  APARs (program level) and PTFs (service level) incorporated into  MVS Download.  ù 5.0, "Installation Requirements and Considerations" on page 8  identifies the resources and considerations for installing and  using MVS Download.  ù 6.0, "Installation Instructions" on page 13 provides detailed  installation instructions for MVS Download.  ù Appendix A, "MVS Download Install Logic" on page 21 provides the  install logic for MVS Download.  Before installing MVS Download, read 3.2, "Preventive Service  Planning" on page 6. This section tells you how to find any updates to  the information and procedures in this program directory.  Do not use this program directory if you are installing MVS Download  with an MVS Custom-Built Installation Process Offering (CBIPO)  (5751-CS1). Instead, use the CBIPO Related Installation Materials  (RIMs) provided with the CBIPO. The CBIPO RIMs will point you to  specific sections of the program directory as required.  If you are installing MVS Download using the MVS Custom-Built Product  Delivery Offering (CBPDO) (5751-CS3), use the softcopy program  directory provided on the CBPDO tape. Your CBPDO contains a softcopy  preventive service planning (PSP) upgrade for this product. All  service and HOLDDATA for MVS Download are included on the CBPDO tape.    (C) Copyright IBM Corp. 1995 1 ¤   1.1 MVS DOWNLOAD DESCRIPTION  MVS Download automatically transmits data from the JES spool to AIX  systems using Transmission Control Protocol/Internet Protocol  (TCP/IP). This eliminates the need for manual print file transfer  using File Transfer Protocol (FTP). A cooperating print server or  archive server running on the AIX system receives the data sets for  printing with PSF/6000 or for archiving using OnDemand for AIX. MVS  Download provides high-speed data transfer, JES scheduling, job  management, data intregrity, and job accounting for distributed  production print management.                 Introduction 2 ¤   2.0 PROGRAM MATERIALS    An IBM program is identified by a program number and a feature code.  The program number for PSF/MVS and the MVS Download feature is  5695-040.  The program announcement material describes the functions supported by  the MVS Download feature. Ask your IBM marketing representative for  this information if you have not already received a copy.  The following sections identify the basic and optional program  materials available with this program.   2.1 BASIC MACHINE-READABLE MATERIAL  The distribution medium for this program is 9-track magnetic tape  (written at 6250 BPI) or 3480 cartridge. The tape or cartridge  contains all the programs and data needed for installation. It is  installed using SMP/E. See 6.0, "Installation Instructions" on  page 13 for more information about how to install the program.  Figure 1 describes the tape or cartridge. Figure 2 describes the file  content of the program tape or cartridge.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 1. Basic Material: Program Tape |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ |  | | FEATURE | PHYSICAL | EXTERNAL LABEL | |  | MEDIUM | NUMBER | VOLUME | IDENTIFICATION | VOLSER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | |  | 6250 tape | 6090 | 1 | PSF.DOWNLOAD.2.2.0 | PRF225 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | |  | 3480 cart. | 6091 | 1 | PSF.DOWNLOAD.2.2.0 | PRF225 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 2. Program Tape: File Content |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ |  | VOLSER | FILE | DATA SET NAME | DISTLIB |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | PRF225 | 1 | SMPMCS | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 2 | IBM.JPRF225.F1 | AAPSMOD0 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 3 | IBM.JPRF225.F2 | APROCLIB |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 4 | IBM.JPRF225.F3 | ASAMPLIB |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À   (C) Copyright IBM Corp. 1995 3 ¤   2.2 OPTIONAL MACHINE-READABLE MATERIAL  MVS Download has no optional machine-readable materials.   2.3 PROGRAM PUBLICATIONS  The following sections identify the basic and optional publications  for MVS Download.   2.3.1 BASIC PROGRAM PUBLICATIONS  Figure 3 identifies the basic program publication for MVS Download.  One copy of this publication is included when you order the basic  materials for MVS Download. For additional copies, contact your IBM  representative.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 3. Basic Material: Unlicensed Publications |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | PUBLICATION TITLE | FORM NUMBER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | PSF/MVS: MVS Download Guide | G544-5294 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À   2.3.2 OPTIONAL PROGRAM PUBLICATIONS  MVS Download has no optional publications.   2.4 PUBLICATIONS USEFUL DURING INSTALLATION  The publications listed in Figure 4 may be useful during the  installation of MVS Download. To order copies, contact your IBM  representative.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 4 (Page 1 of 2). Publications Useful During Installation |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | PUBLICATION TITLE | FORM NUMBER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | SMP/E Reference | SC28-1107 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | SMP/E User's Guide | SC28-1302 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | Program Directory for Print Services Facility/MVS | |  | 2.2.0 | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | IBM Print Services Facility for AIX: Print | S544-3817 |  | Administration | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À   Program Materials 4 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 4 (Page 2 of 2). Publications Useful During Installation |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | PUBLICATION TITLE | FORM NUMBER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | IBM OnDemand for AIX: Installation and Configuration | G544-5280 |  | Guide | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À                  Program Materials 5 ¤   3.0 PROGRAM SUPPORT    This section describes the IBM support available for MVS Download.   3.1 SERVICE INSTRUCTIONS  Contact your IBM marketing representative or systems engineer (SE) for  specific information about available service instructions.   3.2 PREVENTIVE SERVICE PLANNING  If you obtained MVS Download as part of a CBPDO, there is HOLDDATA and  Preventive Service Planning (PSP) information for MVS Download on the  CBPDO tape. Before installing MVS Download, check with your IBM  Support Center or use SoftwareXcel Extended (IBMLink) to see whether  there is additional Preventive Service Planning (PSP) information that  you should know. To obtain this information, specify the following  UPGRADE and SUBSET values:  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 5. PSP Upgrade and Subset ID |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ |  | UPGRADE | SUBSET | RETAIN RELEASE |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | PSFMVS220 | JPRF225 | 225 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À  If you received MVS Download only from IBM Software Distribution, you  should also check to see if additional PSP information is available  prior to installation.   3.3 STATEMENT OF SUPPORT PROCEDURES  Report any difficulties you have using this program to your IBM  Support Center. If an APAR is required, the Support Center will  provide the address to which any needed documentation can be sent.  Figure 6 identifies the component ID (COMPID) for MVS Download.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 6. Component ID |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ |  | FMID | COMPID | COMPONENT NAME | REL |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | JPRF225 | 569504001 | PSF/MVS Download | 225 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À   (C) Copyright IBM Corp. 1995 6 ¤   4.0 PROGRAM AND SERVICE LEVEL INFORMATION    This section identifies the program and any relevant service levels of  MVS Download. The program level refers to the APAR fixes incorporated  into the program. The service level refers to the PTFs integrated.  Information about the cumulative service tape is also provided.   4.1 PROGRAM LEVEL INFORMATION  This is the initial release of MVS Download and no APARs have been  incorporated.   4.2 SERVICE LEVEL INFORMATION  This is the initial release of MVS Download and no PTFs have been  incorporated.   4.3 CUMULATIVE SERVICE TAPE  A cumulative service tape containing PTFs not incorporated into this  release might be included with this program. If you received this  product as part of a CBPDO, then no cumulative service tape is  provided.           (C) Copyright IBM Corp. 1995 7 ¤   5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS    The following sections identify the system requirements for installing  and activating MVS Download. In most cases, you can install MVS  Download on a running system (target system). However, sometimes two  systems may be required. If two systems are required, then the  following terminology is used:  1. The system used to install the program (driving system)  2. The system on which the program is installed (target system).   5.1 DRIVING SYSTEM REQUIREMENTS  This section describes the environment of the driving system required  to install MVS Download.   5.1.1 PROGRAMMING REQUIREMENTS  The minimum SMP/E release required to install MVS Download is System  Modification Program Extended, Version 1, Release 7 with PTF UR40251  or later.   5.1.2 DASD STORAGE REQUIREMENTS  MVS Download uses any storage device that is supported by the  environment in which it is operating. See 5.2.5, "DASD Storage  Requirements" on page 9 for additional information about the amount of  storage required for MVS Download.   5.2 TARGET SYSTEM REQUIREMENTS  This section describes the environment of the target system required  to install and use MVS Download.   5.2.1 OPERATING SYSTEM REQUIREMENTS  The MVS operating system requirements for MVS Download are identical  to those for PSF/MVS 2.2.0 base. The operating system requirements  for PSF/MVS 2.2.0 base are listed in that Program Directory.  To use the MVS Download feature, you need a RS/6000 system running  either PSF for AIX (PSF/6000) Version 2.1 (5765-505) or the OnDemand  for AIX offering, in addition to the MVS host running PSF/MVS.   (C) Copyright IBM Corp. 1995 8 ¤   5.2.2 MACHINE REQUIREMENTS  The target system has no special machine requirements.   5.2.3 PROGRAMMING REQUIREMENTS  The installation of MVS Download requires PSF/MVS base HPRF220 with  PTF UW18588 to be installed on the target system.  To utilize the MVS Download feature, IBM TCP/IP Version 3 Release 1  (5655-HAL), or a subsequent release, is required.   5.2.4 SMP/E PROCEDURES AND DATA SETS  All SMP/E installation jobs provided assume the existence of a  cataloged procedure called SMPPROC containing all necessary DD  statements for the execution of SMP/E. SMPPROC must point to the  Consolidated Software Inventory (CSI) where you are installing MVS  Download. If your SMP/E procedure is not named "SMPPROC", substitute  your procedure name for "SMPPROC" where appropriate. If you do not  have an SMP/E procedure, you can find instructions for building one in  the SMP/E User's Guide or in the SMP/E Reference.  MVS Download is a dependent function of HPRF220, the FMID for PSF/MVS  2.2.0 base. MVS Download must be installed in the same SMP/E zones as  HPRF220.  The values on the SMP/E global zone OPTIONS entry (PEMAX and DSSPACE)  that were used for the installation of PSF/MVS 2.2.0 base are adequate  for the installation of MVS Download. Refer to the SMP/E Reference  for instructions on updating the global zone.   5.2.5 DASD STORAGE REQUIREMENTS  Abbreviations describing the data set type are listed in Figure 7.  These abbreviations are for the following figures.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 7 (Page 1 of 2). Abbreviations used for the data set type |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | ABBREVIATION | DATA SET TYPE |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | NU | New data set used by only the FMIDs listed. In |  | | order to determine the correct storage needed for |  | | this data set, only the storage size given in the |  | | one table needs to be used. No other tables (or |  | | program directories) need to be referenced for the |  | | data set size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À   Installation Requirements and Considerations 9 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 7 (Page 2 of 2). Abbreviations used for the data set type |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | ABBREVIATION | DATA SET TYPE |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | NM | New data set used by more than the FMIDs listed. |  | | In order to determine the correct storage needed |  | | for this data set, the storage size given in the |  | | one table needs to be added to other tables |  | | (perhaps in other program directories). |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | EU | Existing data set used by only the FMIDs listed. |  | | In order to determine the correct storage needed |  | | for this data set, only the storage size given in |  | | the one table needs to be used. No other tables |  | | (or program directories) need to be referenced for |  | | the data set size. |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | EM | Existing data set used by more than the FMIDs |  | | listed. In order to determine the correct storage |  | | needed for this data set, the storage size given in |  | | the one table needs to be added to other tables |  | | (perhaps in other program directories). |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À  The following figures list the target and distribution libraries (data  sets) and their attributes required to install MVS Download.  SMP/E DDDEF entries for each data set should have been created at the  time PSF/MVS 2.2.0 base was installed. No new DDDEFs are required for  the installation of MVS Download than for the PSF/MVS base. The  DDDEFs that are used for the installation of MVS Download are those  for the libraries listed in Figure 8 and Figure 9.  The storage requirements of MVS Download must be added to the storage  required by other programs having data in the same data set (library).  An estimate of required space is the data set's current allocation  plus the storage required by MVS Download.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 8 (Page 1 of 2). Storage Requirements for Target Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.LINKLIB | EM | PO | U | 0 | 6144 | 1 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.PROCLIB | EM | PO | FB | 80 | 6160 | 1 | 1 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À À À À   Installation Requirements and Considerations 10 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 8 (Page 2 of 2). Storage Requirements for Target Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.SAMPLIB | EM | PO | FB | 80 | 6160 | 1 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | À À À À À À À |  | NOTES: |  | |  | 1. The number of blocks and directory blocks specified is the |  | actual minimum storage required by MVS Download after the |  | program is installed and the data sets are compressed. When |  | allocating these data sets, you may want to specify additional |  | storage and directory blocks to allow for maintenance. |  | |  | 2. If required, data sets may be reblocked to a larger size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 9. Storage Requirements for Distribution Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.AAPSMOD0 | EM | PO | U | 0 | 6144 | 1 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.APROCLIB | EM | PO | FB | 80 | 6160 | 1 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | SYS1.ASAMPLIB | EM | PO | FB | 80 | 6160 | 1 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | À À À À À À À |  | NOTES: |  | |  | 1. The number of blocks and directory blocks specified is the |  | actual minimum storage required by MVS Download after the |  | program is installed and the data sets are compressed. When |  | allocating these data sets, you may want to specify additional |  | storage and directory blocks to allow for maintenance. |  | |  | 2. If required, data sets may be reblocked to a larger size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ     Installation Requirements and Considerations 11 ¤   5.2.6 SAMPLE JCL MEMBERS  The sample JCL provided on the PSF/MVS 2.2.0 base product tape as part  of FMID HPRF220 can be used to install MVS Download. If FMID HPRF220  has been previously installed, these sample jobs can be found in  SYS1.SAMPLIB. If FMID HPRF220 is being installed at the same time as  MVS Download, follow the instructions in the Program Directory for  HPRF220 to unload the sample JCL from the PSF/MVS 2.2.0 base product  tape.  This program directory uses the name psf.jcllib to identify the data  set where the sample JCL is stored. If the sample JCL is obtained  from a data set with a different name than psf.jcllib, replace all  future references in this directory to psf.jcllib with that new name.  For example, if FMID HPRF220 has been previously installed, replace  psf.jcllib with SYS1.SAMPLIB.  The following sample JCL members from FMID HPRF220 can be used during  the installation of MVS Download:  APSWAC Sample ACCEPT job  APSWACCK Sample ACCEPT CHECK job  APSWAP Sample APPLY job  APSWAPCK Sample APPLY CHECK job  APSWRCV Sample RECEIVE job  APSWRCVC Sample RECEIVE job for cumulative service  NOTE: Other sample jobs are supplied as part of FMID HPRF220. They  apply only to the installation of PSF/MVS 2.2.0 base and resources,  and are not used during the installation of MVS Download.         Installation Requirements and Considerations 12 ¤   6.0 INSTALLATION INSTRUCTIONS    This chapter describes the installation method and the step-by-step  procedures to install and to activate the functions of MVS Download.  Refer to the separate PSF/MVS 2.2.0 program directory for installation  instructions for PSF/MVS base and resources. The PSF/MVS base must be  installed prior to or concurrent with the installation of MVS  Download.  NOTE: If you install PSF/MVS base and the MVS Download feature  concurrently, the prerequisite PTF UW18588 (and its prerequisites)  must be installed at the same time. The BYPASS(HOLDSYSTEM) parameter  is required on the APPLY and ACCEPT of the prerequisite service  because of an ACTION hold on UW18588.  If you obtained MVS Download as part of a CBPDO, you can use the  RCVPDO job found in the CBPDO RIMLIB data set as well as any service,  HOLDDATA, or preventive service planning (PSP) information included on  the CBPDO tape. For more information, refer to the MVS CBPDO Memo to  User Extension included with the CBPDO.  This release of MVS Download is installed using the SMP/E RECEIVE,  APPLY, and ACCEPT commands.  MVS Download must be installed in the same SMP/E zones as the PSF/MVS  2.2.0 base. In the sample SMP/E jobs shown, the global zone name in  the SMP/E CSI is GLOBAL. The distribution zone name is dlibzone. The  target zone name is tgtzone. If your installation does not use these  zone names, update the sample jobs to reflect the zone names used at  your installation.   6.1 INSTALLING MVS DOWNLOAD  Before installing MVS Download, check the following:  ù If you plan to use the sample jobs, ensure that they are  available. See 5.2.6, "Sample JCL Members" on page 12 for  information on locating the sample jobs.  ù Ensure that SMP/E DD statements or DDDEFs are defined. See the  DDDEF information on page 10 to determine the DDDEFs that are  required.  ù Ensure that adequate space is available in the target and  distribution libraries. See 5.2.5, "DASD Storage Requirements" on  page 9 for data set allocations.   (C) Copyright IBM Corp. 1995 13 ¤   The following steps are described in this section.  1. Receive MVS Download  2. Perform APPLY CHECK  3. Load target libraries using APPLY  4. Perform ACCEPT CHECK  5. Load distribution libraries using ACCEPT   NOTE: The SMP/E dialog panels may be used for the steps that follow  instead of the sample JCL shown.   6.1.1 LOAD SMP/E LIBRARIES USING RECEIVE  Execute the SMP/E RECEIVE job to unload MVS Download data from the  install tape into the SMP/E data sets (SMPPTS and temporary data  sets).  A sample RECEIVE job can be found in psf.jcllib(APSWRCV). A modified  version of the APSWRCV job is shown in Figure 10.  Modify the SMPPTFIN DD statement to change the tape volser from PRF220  to PRF225 for MVS Download. Modify the RECEIVE statement to replace  the FMIDs HPRF220 and JPRF223 with JPRF225, as shown in Figure 10.  NOTE: This step is bypassed if you are receiving the product from a  CBPDO.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWRCV JOB 'account #','name',MSGLEVEL=(1,1) |  | //RECEIVE EXEC SMPPROC |  | //SMP.SMPPTFIN DD DSN=SMPMCS,DISP=(OLD,PASS), |  | // VOL=SER=PRF225,LABEL=(1,SL), <=== CHANGE |  | // UNIT=(tape,,DEFER) |  | //SMPTLIB DD UNIT=xxxx,DISP=OLD,VOL=SER=nnnnnn |  | //SMP.SMPCNTL DD * |  | SET BDY(GLOBAL). |  | RECEIVE S(JPRF225) SYSMOD . <=== CHANGE |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 10. Sample SMP/E RECEIVE Job  A return code of '0' should be received from this job.    Installation Instructions 14 ¤   6.1.2 RECEIVE CUMULATIVE SERVICE TAPE, IF APPLICABLE  A cumulative service tape may be shipped with the product package. If  no cumulative service tape is shipped, or if the product is received  by CBPDO, skip this section.  A sample job to RECEIVE the PTFs and HOLDDATA from the cumulative  service tape can be found in psf.jcllib(APSWRCVC). The APSWRCVC job  is shown in Figure 11 on page 15.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWRCVC JOB 'account #','name',MSGLEVEL=(1,1) |  | //*************************************************** |  | //* RECEIVE CUMULATIVE SERVICE DATA. THE UNIT * |  | //* AND SOURCEID FIELDS MUST BE FILLED IN. * |  | //* SOURCEID IS A UNIQUE NAME THAT ASSIGNS * |  | //* A COMMON IDENTIFIER TO THE SYSMODS RECEIVED. * |  | //*************************************************** |  | //APSWRCVC EXEC SMPPROC |  | //SMPHOLD DD UNIT=tape,LABEL=(4,NL),DISP=SHR, |  | // VOL=SER=CUMTAP, |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200) |  | //SMPPTFIN DD UNIT=tape,LABEL=(1,NL),DISP=SHR, |  | // VOL=SER=CUMTAP, |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200) |  | //SMP.SMPCNTL DD * |  | SET BDY(GLOBAL). |  | RECEIVE SYSMODS HOLDDATA SOURCEID(sssssss). |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 11. RECEIVE Job for Cumulative Service Tape  A return code of "0" should be received from this job.  If any of the PTFs on the tape have a system hold by the ++HOLD SYSTEM  modification control statement with a reason ID equal to UCLIN, file 6  of the cumulative service tape will contain the UCLIN for that PTF.  The instructions for the UCLIN are contained in the cover letter of  the PTF.   6.1.3 PERFORM SMP/E APPLY CHECK  Execute the SMP/E APPLY CHECK job to determine which SYSMODs, if any,  are missing. Any missing SYSMODs should be installed before you  continue with the installation of MVS Download.  A sample APPLY CHECK job can be found in psf.jcllib(APSWAPCK). A  modified version of the APSWAPCK job is shown in Figure 12 on page 16.  Modify the APPLY CHECK statement to replace the FMIDs HPRF220 and  JPRF223 with JPRF225 for MVS Download, as shown in Figure 12. If you   Installation Instructions 15 ¤   are installing PSF/MVS base and MVS Download concurrently, then add  JPRF225 to the list of FMIDs instead of replacing them.  To receive the full benefit of the SMP/E Causer SYSMOD Summary Report,  do not bypass the following on the APPLY CHECK: PRE, ID, REQ, and  IFREQ. This is because the SMP/E root cause analysis identifies the  cause only of ERRORS and not of WARNINGS (SYSMODs that are bypassed  are treated as warnings, not errors, by SMP/E). Remove the PRE, ID,  REQ, and IFREQ parameters from the sample job APSWAPCK before you run  the APPLY CHECK for JPRF225.  The GROUPEXTEND operand indicates that SMP/E apply all requisite  SYSMODs. The requisite SYSMODS might be applicable to other  functions.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWAPCK JOB 'account #','name',MSGLEVEL=(1,1) |  | //APPLY EXEC SMPPROC |  | //SMPTLIB DD UNIT=xxxx,DISP=OLD,VOL=SER=nnnnnn |  | //SMP.SMPCNTL DD * |  | SET BDY(tgtzone). |  | APPLY CHECK S(JPRF225) <=== CHANGE |  | BYPASS(PRE,ID,REQ,IFREQ,HOLDSYS,HOLDUSER, <=== CHANGE |  | HOLDCLASS(UCLREL,ERREL)) GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 12. Sample SMP/E APPLY CHECK Job  A return code of '0' should be received from this job. Resolve any  error messages before continuing with the APPLY step.   6.1.4 LOAD TARGET LIBRARIES USING APPLY  Execute SMP/E to load the target libraries from the SMP/E temporary  data sets.  A sample APPLY job can be found in psf.jcllib(APSWAPP). A modified  version of the APSWAPP job is shown in Figure 13 on page 17.  Modify the APPLY statement to replace the FMIDs HPRF220 and JPRF223  with JPRF225 for MVS Download, as shown in Figure 13. If you are  installing PSF/MVS base and MVS Download concurrently, then add  JPRF225 to the list of FMIDs instead of replacing them.     Installation Instructions 16 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWAP JOB 'account #','name',MSGLEVEL=(1,1) |  | //APPLY EXEC SMPPROC |  | //SMPTLIB DD UNIT=xxxx,DISP=OLD,VOL=SER=nnnnnn |  | //SMP.SMPCNTL DD * |  | SET BDY(tgtzone). |  | APPLY S(JPRF225) <=== CHANGE |  | BYPASS(HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 13. Sample SMP/E APPLY Job  A return code of '0' should be received from this job.   6.1.5 VERIFY INSTALLATION OF MVS DOWNLOAD (OPTIONAL)  If you want to verify that the installation of MVS Download was  successful prior to running the SMP/E ACCEPT, you should use the  information in 6.2, "Post-installation Configuration Tasks and IVP" on  page 19 and the PSF/MVS: MVS Download Guide to configure MVS Download  before continuing with 6.1.6, "Perform SMP/E ACCEPT CHECK."   6.1.6 PERFORM SMP/E ACCEPT CHECK  Execute the SMP/E ACCEPT CHECK job to determine which SYSMODs, if any,  are missing. Any missing SYSMODs should be installed before you  continue with the installation of MVS Download.  A sample ACCEPT CHECK job can be found in psf.jcllib(APSWACCK). A  modified version of the APSWACCK job is shown in Figure 14 on page 18.  Modify the ACCEPT CHECK statement to replace the FMIDs HPRF220 and  JPRF223 with JPRF225 for MVS Download, as shown in Figure 14. If you  are installing PSF/MVS base and MVS Download concurrently, then add  JPRF225 to the list of FMIDs instead of replacing them.  To receive the full benefit of the SMP/E Causer SYSMOD Summary Report,  do not bypass the following on the ACCEPT CHECK: PRE, ID, REQ, and  IFREQ. This is because the SMP/E root cause analysis identifies the  cause only of ERRORS and not of WARNINGS (SYSMODs that are bypassed  are treated as warnings, not errors, by SMP/E). Remove the PRE, ID,  REQ, and IFREQ parameters from the sample job APSWACCK before you run  the ACCEPT CHECK for JPRF225.  The GROUPEXTEND operand indicates that SMP/E accept all requisite  SYSMODs. The requisite SYSMODS might be applicable to other  functions.   Installation Instructions 17 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWACCK JOB 'account #','name',MSGLEVEL=(1,1) |  | //ACCEPT EXEC SMPPROC |  | //SMPTLIB DD UNIT=xxxx,DISP=OLD,VOL=SER=nnnnnn |  | //SMP.SMPCNTL DD * |  | SET BDY(dlibzone). |  | ACCEPT CHECK S(JPRF225) <=== CHANGE |  | BYPASS(PRE,ID,REQ,IFREQ,HOLDSYS,HOLDUSER, <=== CHANGE |  | HOLDCLASS(UCLREL,ERREL)) GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 14. Sample SMP/E ACCEPT CHECK Job  A return code of '0' should be received from this job. Resolve any  error messages before continuing with the ACCEPT step.   6.1.7 LOAD DISTRIBUTION LIBRARIES USING ACCEPT  Execute the SMP/E ACCEPT job to load the distribution libraries from  the SMP/E temporary data sets.  A sample ACCEPT job can be found in psf.jcllib(APSWAC). A modified  version of the APSWAC job is shown in Figure 15.  Modify the ACCEPT statement to replace the FMIDs HPRF220 and JPRF223  with JPRF225 for MVS Download, as shown in Figure 15. If you are  installing PSF/MVS base and MVS Download concurrently, then add  JPRF225 to the list of FMIDs instead of replacing them.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APSWAC JOB 'account #','name',MSGLEVEL=(1,1) |  | //ACCEPT EXEC SMPPROC |  | //SMPTLIB DD UNIT=xxxx,DISP=OLD,VOL=SER=nnnnnn |  | //SMP.SMPCNTL DD * |  | SET BDY(dlibzone). |  | ACCEPT S(JPRF225) <=== CHANGE |  | BYPASS(HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND COMPRESS(ALL). |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 15. Sample SMP/E ACCEPT Job  A return code of '0' should be received from this job.     Installation Instructions 18 ¤   6.2 POST-INSTALLATION CONFIGURATION TASKS AND IVP  This section summarizes the tasks involved in configuring the MVS  Download feature after your installation. You must complete these  tasks before you can verify that the MVS Download installation was  successful. These tasks are described in the PSF/MVS: MVS Download  Guide. Section titles from that book are referenced in the checklist  below, where applicable.  1. Plan the MVS Download functional subsystem - Planning the MVS  Download Functional Subsystem.  2. Decide how many functional subsystems (FSS) and functional  subsystem applications (FSAs) to create - Defining Multiple  Functional Subsystems.  __ Determine the region size for each FSS - Selecting a Region  Size.  __ Decide on the JES work-selection criteria for each FSA -  Defining Work-Selection Criteria.  __ Decide on a default checkpointing interval for each FSA -  Requesting Checkpointing.  __ Decide on default printing options, if any, for each FSA -  Defining Default Printing Options.  3. Define the MVS Download functional subsystem.  JES2 - Defining a JES2 Functional Subsystem.  __ Create an FSS(fss_name) statement for each FSS -  FSS(fss_name) Statement.  __ Create a PRTnnnn statement for each FSA - PRTnnnn  Statement.  JES3 - Defining a JES3 Functional Subsystem.  __ Create an FSSDEF statement for each FSS - FSSDEF  Statement.  __ Create a DEVICE statement for each FSA - DEVICE  Statement.  4. Create a startup procedure for each MVS Download FSS - Creating an  MVS Download Startup Procedure.     Installation Instructions 19 ¤   5. Create a routing-control data set.  __ Decide on routing criteria to use: class, form, and  destination for each server - Defining Routing Criteria.  __ Determine the socket address of each associated AIX server  - Defining Socket Addresses.   6. Modify installation accounting routines if necessary - Using  Accounting Information.  7. Update the MVS Program Properties Table (PPT) - Updating the MVS  Program Properties Table.  8. IPL the MVS system.  An IPL is required to activate the changes to the MVS Program  Properties Table, and to activate the MVS Download code in  SYS1.LINKLIB.  9. Start a MVS Download FSA on the MVS system - Operating MVS  Download.  You should get an APS992I message on the MVS console after the FSA  is started. It is an indication the product is installed  successfully. This can be considered a successful IVP of MVS  Download.  To actually transmit a dataset to your AIX system, you need to  start the MVS Download server on the AIX system. Refer to IBM  Print Services Facility for AIX: Print Administration or IBM  OnDemand for AIX: Installation and Configuration Guide for  information on configuring the server on the AIX system.         Installation Instructions 20 ¤   APPENDIX A. MVS DOWNLOAD INSTALL LOGIC    This is the System Modification Program install logic for MVS  Download:  ++FUNCTION(JPRF225) FESN(0561046) FILES(3) REWORK(1995164)  RFDSNPFX(IBM)  /*  (C) COPYRIGHT IBM CORPORATION 1995  ALL RIGHTS RESERVED  US GOVERNMENT USERS RESTRICTED RIGHTS  - USE, DUPLICATION OR DISCLOSURE  RESTRICTED BY GSA ADP SCHEDULE  CONTRACT WITH IBM CORPORATION  LICENSED MATERIALS - PROPERTY OF IBM (5695-040)  REFER TO COPYRIGHT INSTRUCTIONS FORM NUMBER G120-2083  */  .  ++VER(Z038) FMID(HPRF220) PRE(UW18588).  ++MOD(APSF0005) DISTLIB(AAPSMOD0) RELFILE(1).  ++PROC(APSWPROK) DISTLIB(APROCLIB) SYSLIB(PROCLIB) RELFILE(2).  ++SAMP(APSWRCF ) DISTLIB(ASAMPLIB) SYSLIB(SAMPLIB) RELFILE(3).  If you ordered MVS Download as an individual feature tape (not in  CBIPO or CBPDO), you can obtain the complete SMP/E modification  control statements for the installation by printing the first file of  the MVS Download program tape.         (C) Copyright IBM Corp. 1995 21 ¤                      22 ¤   READER'S COMMENTS    PROGRAM DIRECTORY FOR MVS DOWNLOAD VERSION 2 RELEASE 2, MODIFICATION  LEVEL 0  You may use this form to comment about this document, its  organization, or subject matter with the understanding that IBM may  use or distribute whatever information you supply in any way it  believes appropriate without incurring any obligation to you.  For each of the topics below please indicate your satisfaction level  by circling your choice from the rating scale. If a statement does  not apply, please circle N.  ÚÄÄÄ RATING SCALE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | very very not |  | satisfied <=====================> dissatisfied applicable |  | 1 2 3 4 5 N |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ¿  | | SATISFACTION |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | ¿ ¿ ¿ ¿ ¿ |  | Ease of product installation | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Contents of program directory | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Installation Verification Programs | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Time to install the product | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Readability and organization of program | 1 | 2 | 3 | 4 | 5 | N |  | directory tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Necessity of all installation tasks | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Accuracy of the definition of the | 1 | 2 | 3 | 4 | 5 | N |  | installation tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Technical level of the installation | 1 | 2 | 3 | 4 | 5 | N |  | tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Ease of getting the system into | 1 | 2 | 3 | 4 | 5 | N |  | production after installation | | | | | | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À À À  How did you order this product?   (C) Copyright IBM Corp. 1995 23 ¤   __ CBIPO  __ CBPDO  __ Independent  __ Other   Is this the first time your organization has installed this product?  __ Yes  __ No   Were the people who did the installation experienced with the  installation of MVS products?  __ Yes  __ No   If yes, how many years? __  If you have any comments to make about your ratings above, or any  other aspect of the product installation, please list them below:  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________    Reader's Comments 24 ¤   Please provide the following contact information:  ____________________________________________________________  Name and Job Title  ____________________________________________________________  Organization  ____________________________________________________________  ____________________________________________________________  Address  ____________________________________________________________  Telephone  Thank you for your participation.  Please send the completed form to (or give to your IBM representative  who will forward it to the MVS Download Development group):  IBM Printing Systems Company  Box 1900  Boulder, CO 80301-9191  Attention: J36/003G             Reader's Comments 25 ¤   IBM   Program Number: 5695-040 6090  Printed in U.S.A.