ÿSCRIPT/VS 4.0.0: DEVICE 1403N8 CHARS MONO ¯ ÿ ÿ ÿ ÿ ÿ Program Directory for ÿ ÿ Document Library Facility ÿ ÿ Release 3, Modification Level 0 ÿ ÿ Program Number 5748-XXE ÿ ÿ FMID HSL1302 ÿ ÿ for Use with ÿ MVS ÿ ÿ CBPDO Level SMC9827 ÿ ÿ ÿ Document Date: July 1998 ÿ ÿ ÿ ÿ ÿ ÿ ÿ GI10-0231-00 ¯ ÿ ÿ ¬ÿÿÿ NOTE! ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ÿ » Before using this information and the product it supports, be sure » ÿ » to read the general information under "Notices" on page v. » ÿ » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ (C) COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION 1984,1998. ÿ ALL RIGHTS RESERVED. ÿ Note to U.S. Government Users ÿÿ Documentation related to restricted ÿ rights ÿÿ Use, duplication or disclosure is subject to restrictions ÿ set forth in GSA ADP Schedule Contract with IBM Corp. ¯ ÿ ÿ CONTENTS ÿ ÿ ÿ NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V ÿ Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . v ÿ ÿ 1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 1 ÿ 1.1 DLF For MVS Description . . . . . . . . . . . . . . . . . . 1 ÿ 1.2 DLF For MVS FMID . . . . . . . . . . . . . . . . . . . . . 2 ÿ ÿ 2.0 PROGRAM MATERIALS . . . . . . . . . . . . . . . . . . . . . 3 ÿ 2.1 Basic Machine-Readable Material . . . . . . . . . . . . . . 3 ÿ 2.2 Optional Machine-Readable Material . . . . . . . . . . . . . 3 ÿ 2.3 Program Publications . . . . . . . . . . . . . . . . . . . . 4 ÿ 2.3.1 Basic Program Publications . . . . . . . . . . . . . . . 4 ÿ 2.3.2 Optional Program Publications . . . . . . . . . . . . . 4 ÿ 2.4 Program Source Materials . . . . . . . . . . . . . . . . . . 4 ÿ 2.5 Publications Useful During Installation . . . . . . . . . . 4 ÿ ÿ 3.0 PROGRAM SUPPORT . . . . . . . . . . . . . . . . . . . . . . 7 ÿ 3.1 Program Services . . . . . . . . . . . . . . . . . . . . . . 7 ÿ 3.2 Preventive Service Planning . . . . . . . . . . . . . . . . 7 ÿ 3.3 Statement of Support Procedures . . . . . . . . . . . . . . 7 ÿ ÿ 4.0 PROGRAM AND SERVICE LEVEL INFORMATION . . . . . . . . . . . 9 ÿ 4.1 Program Level Information . . . . . . . . . . . . . . . . . 9 ÿ 4.2 Service Level Information . . . . . . . . . . . . . . . . . 9 ÿ 4.3 Cumulative Service Tape . . . . . . . . . . . . . . . . . . 9 ÿ ÿ 5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS . . . . . . . . 11 ÿ 5.1 Driving System Requirements . . . . . . . . . . . . . . . . 11 ÿ 5.1.1 Machine Requirements . . . . . . . . . . . . . . . . . . 11 ÿ 5.1.2 Programming Requirements . . . . . . . . . . . . . . . . 11 ÿ 5.2 Target System Requirements . . . . . . . . . . . . . . . . . 11 ÿ 5.2.1 Operating System Requirements . . . . . . . . . . . . . 11 ÿ 5.2.2 Machine Requirements . . . . . . . . . . . . . . . . . . 12 ÿ 5.2.3 Programming Requisites . . . . . . . . . . . . . . . . . 12 ÿ 5.2.3.1 Minimum Requisites . . . . . . . . . . . . . . . . . 12 ÿ 5.2.3.2 Functional Requisites . . . . . . . . . . . . . . . 12 ÿ 5.2.3.3 Toleration/Coexistence Requisites . . . . . . . . . 13 ÿ 5.2.3.4 Special Considerations . . . . . . . . . . . . . . . 13 ÿ 5.2.4 DASD Storage Requirements . . . . . . . . . . . . . . . 13 ÿ 5.3 FMID Deleted . . . . . . . . . . . . . . . . . . . . . . . . 15 ÿ ÿ 6.0 INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . 17 ÿ 6.1 Installing DLF For MVS . . . . . . . . . . . . . . . . . . . 17 ÿ 6.1.1 SMP/E Considerations for Installing DLF For MVS . . . . 17 ÿ 6.1.2 SMP/E Environment . . . . . . . . . . . . . . . . . . . 17 ÿ 6.1.3 SMP/E Options Subentry Values . . . . . . . . . . . . . 17 ÿ 6.1.4 Unload Sample Jobs from Product Tape . . . . . . . . . . 18 ÿ 6.1.5 DELETE Previous Level of DLF For MVS, if applicable . . 18 ÿ 6.1.6 Perform SMP/E RECEIVE . . . . . . . . . . . . . . . . . 19 ÿ 6.1.7 Allocate SMP/E Target and Distribution Libraries . . . . 20 ÿ 6.1.8 DDDEF Entries - Adding to your SMP/E Procedure . . . . . 20 ÿ 6.1.9 Perform SMP/E APPLY CHECK . . . . . . . . . . . . . . . 20 ÿ 6.1.10 Perform SMP/E APPLY . . . . . . . . . . . . . . . . . . 20 ÿ 6.1.11 Perform SMP/E ACCEPT CHECK . . . . . . . . . . . . . . 21 ÿ 6.1.12 Perform SMP/E ACCEPT . . . . . . . . . . . . . . . . . 21 ÿ 6.2 Installation Verification Procedure . . . . . . . . . . . . 21 ÿ 6.2.1 Post Install Considerations . . . . . . . . . . . . . . 22 ÿ ÿ APPENDIX A. DLF FOR MVS INSTALL LOGIC . . . . . . . . . . . . . 23 ÿ A.1 SMP/E Modification Control Statements . . . . . . . . . . . 23 ÿ A.1.1 For FMID HSL1302 . . . . . . . . . . . . . . . . . . . . 23 ÿ ÿ APPENDIX B. READER'S COMMENTS . . . . . . . . . . . . . . . . . 25 ÿ ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 iii ¯ ÿ ÿ FIGURES ÿ ÿ ÿ 1. Basic Material: Program Tape . . . . . . . . . . . . . . . . 3 ÿ 2. Program Tape: File Content . . . . . . . . . . . . . . . . . 3 ÿ 3. Basic Material: Licensed Publications . . . . . . . . . . . 4 ÿ 4. Publications Useful During Installation . . . . . . . . . . 4 ÿ 5. PSP Upgrade and Subset ID . . . . . . . . . . . . . . . . . 7 ÿ 6. Component ID . . . . . . . . . . . . . . . . . . . . . . . . 7 ÿ 7. Driving System Software Requirements . . . . . . . . . . . . 11 ÿ 8. Driving System Software Requirements . . . . . . . . . . . . 11 ÿ 9. Minimum Requisites . . . . . . . . . . . . . . . . . . . . . 12 ÿ 10. Functional Requisites . . . . . . . . . . . . . . . . . . . 12 ÿ 11. Total DASD Space Required (in 3390 tracks) by DLF For MVS 13 ÿ 12. Storage Requirements for SMP/E Work Data Sets . . . . . . . 14 ÿ 13. Storage Requirements for SMP/E Data Sets . . . . . . . . . . 14 ÿ 14. Storage Requirements for DLF For MVS Target Libraries . . . 14 ÿ 15. Storage Requirements for DLF For MVS Distribution Libraries 15 ÿ 16. FMID Deleted . . . . . . . . . . . . . . . . . . . . . . . . 15 ÿ 17. SMP/E Options Subentry Values . . . . . . . . . . . . . . . 18 ÿ 18. Unload - Sample Unload tape job . . . . . . . . . . . . . . 18 ÿ 19. DELETE Job to delete previous level of DLF For MVS . . . . . 19 ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ iv DLF For MVS Program Directory ¯ ÿ ÿ NOTICES ÿ ÿ ÿ A form for reader's comments appears at the back of this publication. ÿ When you send information to IBM, you grant IBM a nonexclusive right ÿ to use or distribute the information in any way it believes ÿ appropriated without incurring any obligation to you. ÿ ÿ References in this document to IBM products, programs, or services do ÿ not imply that IBM intends to make these available in all countries in ÿ which IBM operates. Any reference to an IBM product, program, or ÿ service is not intended to state or imply that only IBM's product, ÿ program, or service may be program, or service may be used. Any ÿ functionally equivalent product, program, or service that does not ÿ infringe on any of IBM's intellectual property rights may be used ÿ instead of the IBM product, program, or service. Evaluation and ÿ verification of operation in conjunction with other products, except ÿ those expressly designated by IBM, is the user's responsibility. ÿ ÿ APAR numbers are provided in this document to assist in locating PTFs ÿ that may be required. Ongoing problem reporting may result in ÿ additional APARs being created. Therefore, the APAR lists in this ÿ document may not be complete. To obtain current service ÿ recommendations and to identify current product service requirements, ÿ always contact the IBM Customer Support Center. ÿ ÿ IBM may have patents or pending patent applications covering subject ÿ matter in this document. The furnishing of this document does not ÿ give you any license to these patents. You can send license ÿ inquiries, in writing, to the ÿ ÿ International Business Machines Corporation ÿ IBM Director of Licensing ÿ 500 Columbus Avenue ÿ Thornwood, New York 10594 ÿ USA ÿ ÿ For online versions of this book, we authorize you to: ÿ ÿ ¯ Copy, modify, and print the documentation contained on the media, ÿ for use within your enterprise, provided you reproduce the ÿ copyright notice, all warning statements, and other required ÿ statements on each copy or partial copy. ÿ ÿ ¯ Transfer the original unaltered copy of the documentation when you ÿ transfer the related IBM product (which may be either machines you ÿ own, or programs, if the program's license terms permit a ÿ transfer). You must, at the same time, destroy all other copies ÿ of the documentation. ÿ ÿ You are responsible for payment of any taxes, including personal ÿ property taxes, resulting from this authorization. ÿ ÿ THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES ÿ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ÿ ÿ Some jurisdictions do not allow the exclusion of implied warranties, ÿ so the above exclusion may not apply to you. ÿ ÿ Your failure to comply with the terms above terminates this ÿ authorization. Upon termination, you must destroy your machine ÿ readable documentation. ÿ ÿ TRADEMARKS ÿ ÿ The following terms are trademarks of the IBM Corporation in the ÿ United States or other countries or both: ÿ ÿ Advanced Function Presentation DFSMS ÿ CBPDO DLF ÿ CBIPO IBM ÿ ÿ (C) Copyright IBM Corp. 1984,1998 v ¯ ÿ ÿ IBMLink OS/390 ÿ MVS ProductPac ÿ MVS/ESA RETAIN ÿ MVS/SP SP ÿ MVS/XA SystemPac ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ vi DLF For MVS Program Directory ¯ ÿ ÿ 1.0 INTRODUCTION ÿ ÿ ÿ This program directory is intended for the system programmer ÿ responsible for program installation and maintenance. It contains ÿ information concerning the material and procedures associated with the ÿ installation of Document Library Facility. This publication refers to ÿ Document Library Facility as DLF For MVS. You should read all of this ÿ program directory before installing the program and then keep it for ÿ future reference. ÿ ÿ The program directory contains the following sections: ÿ ÿ ¯ 2.0, "Program Materials" on page 3 identifies the basic and ÿ optional program materials and documentation for DLF For MVS. ÿ ÿ ¯ 3.0, "Program Support" on page 7 describes the IBM support ÿ available for DLF For MVS. ÿ ÿ ¯ 4.0, "Program and Service Level Information" on page 9 lists the ÿ APARs (program level) and PTFs (service level) incorporated into ÿ DLF For MVS. ÿ ÿ ¯ 5.0, "Installation Requirements and Considerations" on page 11 ÿ identifies the resources and considerations for installing and ÿ using DLF For MVS. ÿ ÿ ¯ 6.0, "Installation Instructions" on page 17 provides detailed ÿ installation instructions for DLF For MVS. ÿ ÿ ¯ 6.2, "Installation Verification Procedure" on page 21 provides ÿ information on the installation verification procedures. ÿ ÿ ¯ 6.2.1, "Post Install Considerations" on page 22 provides ÿ information on post installation. ÿ ÿ ¯ Appendix A, "DLF For MVS Install Logic" on page 23 provides the ÿ install logic for DLF For MVS. ÿ ÿ Before installing DLF For MVS, read 3.2, "Preventive Service Planning" ÿ on page 7. This section tells you how to find any updates to the ÿ information and procedures in this program directory. ÿ ÿ Do not use this program directory if you are installing DLF For MVS ÿ with an MVS Custom-Built Installation Process Offering (CBIPO), ÿ SystemPac, or ServerPac. When using these offerings, use the jobs and ÿ documentation supplied with the offering. This documentation may ÿ point you to specific sections of the program directory as required. ÿ ÿ If you are installing DLF For MVS using the MVS Custom-Built Product ÿ Delivery Offering (CBPDO) (5751-CS3), use the softcopy program ÿ directory provided on the CBPDO tape. Your CBPDO contains a softcopy ÿ preventive service planning (PSP) upgrade for this product. All ÿ service and HOLDDATA for DLF For MVS are included on the CBPDO tape. ÿ ÿ 1.1 DLF FOR MVS DESCRIPTION ÿ ÿ DLF For MVS is a storage facility that stores, archives (stores on a ÿ separate, sequential data set), and retrieves data in a protected ÿ environment. It includes calling sequences that can be used to invoke ÿ DLF For MVS as a subroutine of a user-written program, to call special ÿ processors to handle data conversion or manipulation, or to invoke ÿ user exit routines. If DCF is installed, you can use DLF For MVS to ÿ run the SCRIPT/VS formatter in the batch environments of MVS. ÿ ÿ DLF For MVS is either run as a batch job or invoked as a callable ÿ subroutine. DLF For MVS can be installed in the batch environments of ÿ the MVS operating system, provided Virtual Storage Access Method ÿ (VSAM) and the Access Method Services are available. DCF can also be ÿ installed with DLF For MVS in these batch environments, but it is not ÿ required unless the SCRIPT/VS formatter is to be used. ÿ ÿ (C) Copyright IBM Corp. 1984,1998 1 ¯ ÿ ÿ 1.2 DLF FOR MVS FMID ÿ ÿ DLF For MVS consists of the following FMID: ÿ ÿ HSL1302 ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 2 DLF For MVS Program Directory ¯ ÿ ÿ 2.0 PROGRAM MATERIALS ÿ ÿ ÿ An IBM program is identified by a program number and a feature number. ÿ The program number for DLF For MVS is 5748-XXE. ÿ ÿ Basic Machine-Readable Materials are materials that are supplied under ÿ the base license and feature code, and are required for the use of the ÿ product. Optional Machine-Readable Materials are orderable under ÿ separate feature codes, and are not required for the product to ÿ function. ÿ ÿ The program announcement material describes the features supported by ÿ DLF For MVS. Ask your IBM representative for this information if you ÿ have not already received a copy. ÿ ÿ 2.1 BASIC MACHINE-READABLE MATERIAL ÿ ÿ The distribution medium for this program is 9-track magnetic tape ÿ (written at 6250 BPI) or 3480 or 4mm cartridge. The tape or cartridge ÿ contains all the programs and data needed for installation. It is ÿ installed using SMP/E, and is in SMP/E RELFILE format. See 6.0, ÿ "Installation Instructions" on page 17 for more information about how ÿ to install the program. ÿ ÿ Figure 1 describes the tape or cartridge. Figure 2 describes the file ÿ content of the program tape or cartridge. ÿ ÿ NOTE: If you are installing DLF For MVS using the MVS Custom-Built ÿ Product Delivery Offering (CBPDO) (5751-CS3), some of the information ÿ in these figures may not be valid. Consult the CBPDO documentation ÿ for actual values. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 1. Basic Material: Program Tape » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ » ÿ » » FEATURE » PHYSICAL » EXTERNAL LABEL » » ÿ » MEDIUM » NUMBER » VOLUME » IDENTIFICATION » VOLSER » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » ÿ » 6250 cart. » 5195 » 1 » 48XXEM0R35195 » SL1302 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » ÿ » 3480 cart. » 5862 » 1 » 48XXEM0R35862 » SL1302 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » ÿ » 4mm cart. » 5701 » 1 » 48XXEM0R35701 » SL1302 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 2. Program Tape: File Content » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ ¼ ¼ » ÿ » » » » DIST » » » BLK » ÿ » VOLSER » FILE » NAME » LIBRARY » RECFM » LRECL » SIZE » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » SL1302 » 1 » SMPMCS » -- » FB » 80 » 8800 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » » 2 » IBM.HSL1302.F1 » JCLIN » FB » 80 » 8800 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » » 2 » IBM.HSL1302.F2 » DLFDIST » U » 0 » 6144 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » » 3 » IBM.HSL1302.F3 » ADLFMACS» FB » 80 » 3120 » ÿ » » » » ADLFSAMP» » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » » 4 » IBM.HSL1302.F4 » ADLFASM » FB » 80 » 3120 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ 2.2 OPTIONAL MACHINE-READABLE MATERIAL ÿ ÿ No optional machine-readable materials are provided for DLF For MVS. ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 3 ¯ ÿ ÿ 2.3 PROGRAM PUBLICATIONS ÿ ÿ The following sections identify the basic and optional publications ÿ for DLF For MVS. ÿ ÿ 2.3.1 BASIC PROGRAM PUBLICATIONS ÿ ÿ Figure 3 identifies the basic program publications for DLF For MVS. ÿ One copy of each of these publications is included when you order the ÿ basic materials for DLF For MVS. For additional copies, contact your ÿ IBM representative. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 3. Basic Material: Licensed Publications » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PUBLICATION TITLE » FORM NUMBER » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Library Facility Licensed Program » GH20-9164 » ÿ » Specifications » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Library Facility Diagnosis Guide » SY35-0071 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Library Facility Diagnosis Reference » LY35-0072 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ 2.3.2 OPTIONAL PROGRAM PUBLICATIONS ÿ ÿ No optional publications are provided for DLF For MVS. ÿ ÿ 2.4 PROGRAM SOURCE MATERIALS ÿ ÿ No program source materials or viewable program listings are provided ÿ for DLF For MVS. ÿ ÿ 2.5 PUBLICATIONS USEFUL DURING INSTALLATION ÿ ÿ No additional publications are provided for DLF For MVS., but are ÿ useful to the installation and execution of this product. You can ÿ order publications by contacting your IBM representative. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 4 (Page 1 of 2). Publications Useful During Installation » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PUBLICATION TITLE » FORM NUMBER » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Composition Facility and Document Library » GH20-9158 » ÿ » Facility: » » ÿ » General Information » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Composition Facility and Document Library » GX20-2332 » ÿ » Facility: » » ÿ » Executive Overview and Product Summary » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Library Facility Guide » SH20-9165 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Document Library Facility Messages » SH35-0049 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » OS/390 SMP/E Commands » SC28-1805 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » OS/390 SMP/E Reference » SC28-1806 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » OS/390 SMP/E User's Guide » SC28-1740 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » OS/390 SMP/E Messages and Codes » SC28-1738 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » SMP/E Reference » SC28-1107 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » SMP/E User's Guide » SC28-1302 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » SMP/E Messages and Codes » SC28-1108 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ 4 DLF For MVS Program Directory ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 4 (Page 2 of 2). Publications Useful During Installation » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PUBLICATION TITLE » FORM NUMBER » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » OS/390 MVS JCL Reference » GC28-1757 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » MVS/ESA V5 JCL Reference » GC28-1479 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » MVS/ESA V4 JCL Reference » GC28-1654 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Program Materials 5 ¯ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 6 DLF For MVS Program Directory ¯ ÿ ÿ 3.0 PROGRAM SUPPORT ÿ ÿ ÿ This section describes the IBM support available for DLF For MVS. ÿ ÿ 3.1 PROGRAM SERVICES ÿ ÿ Contact your IBM representative for specific information about ÿ available program services. ÿ ÿ 3.2 PREVENTIVE SERVICE PLANNING ÿ ÿ Before installing DLF For MVS, check with your IBM Support Center or ÿ use SoftwareXcel Extended (IBMLink) to see whether there is additional ÿ Preventive Service Planning (PSP) information that you should know. ÿ To obtain this information, specify the following UPGRADE and SUBSET ÿ values: ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 5. PSP Upgrade and Subset ID » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ » ÿ » UPGRADE » SUBSET » RETAIN RELEASE » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » DCF140 » HSL1302/9827 » 300 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ÿ ÿ 3.3 STATEMENT OF SUPPORT PROCEDURES ÿ ÿ Report any difficulties you have using this program to your IBM ÿ Support Center. If an APAR is required, the Support Center will ÿ provide the address to which any needed documentation can be sent. ÿ ÿ Figure 6 identifies the component ID (COMPID) for DLF For MVS. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 6. Component ID » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ » ÿ » » » » RETAIN » ÿ » FMID » COMPID » COMPONENT NAME » RELEASE » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » ÿ » HSL1302 » 5748XXE00 » DLF » 300 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 7 ¯ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 8 DLF For MVS Program Directory ¯ ÿ ÿ 4.0 PROGRAM AND SERVICE LEVEL INFORMATION ÿ ÿ ÿ This section identifies the program and any relevant service levels of ÿ DLF For MVS. The program level refers to the APAR fixes incorporated ÿ into the program. The service level refers to the PTFs integrated. ÿ Information about the cumulative service tape is also provided. This ÿ DLF For MVS is at CBPDO level 9827. ÿ ÿ 4.1 PROGRAM LEVEL INFORMATION ÿ ÿ The following APAR fixes against previous releases of DLF For MVS have ÿ been incorporated into this release. ÿ ÿ AL00566 AL63734 AP31979 AP44269 ÿ AL02847 AN83969 AP32028 AP44543 ÿ AL07567 AP22737 AP32029 AP45842 ÿ AL13001 AP31368 AP32032 AP46220 ÿ AL29589 AP31955 AP37908 AP48472 ÿ AL31092 AP31960 AP38835 AP48666 ÿ AL35919 AP31964 AP39086 AP50928 ÿ AL48730 AP31965 AP42610 AP52393 ÿ AL48733 AP31966 AP44267 AQ16495 ÿ AL59612 ÿ ÿ 4.2 SERVICE LEVEL INFORMATION ÿ ÿ PTFs containing APAR fixes against this release of DLF For MVS have ÿ been incorporated into this product tape. ÿ ÿ UL00745-PUT8606 UL75814-PUT9005 UP61816-PUT8507 ÿ UL01704-PUT8607 UL90020-PUT8709 UP68655-PUT8602 ÿ UL03195-PUT8609 UN98513-PUT9612 UP68906-PUT8604 ÿ UL16255-PUT8708 UP45660-PUT8501 UP73087-PUT8604 ÿ UL35208-PUT8807 UP48200 UP73089-PUT8604 ÿ UL39101-PUT8808 UP49292-PUT8409 UP73154-PUT8604 ÿ UL44534-PUT8902 UP49429-PUT8409 UP76528-PUT8605 ÿ UL60495-PUT8908 UP58109-PUT8505 UP90233-PUT8507 ÿ UL65102-PUT9001 UP60441-PUT8507 UP90235-PUT8507 ÿ UL75507-PUT9005 UP61277-PUT8507 UQ19038 ÿ ÿ 4.3 CUMULATIVE SERVICE TAPE ÿ ÿ A cumulative service tape, containing PTFs not incorporated into this ÿ release, might be included with this program. Installation ÿ instructions for cumulative service tapes can be found in the SMP/E ÿ publications. ÿ ÿ If you received this product as part of a CBPDO or a ProductPac, PTFs ÿ not incorporated into this release are provided on the tape, and a ÿ separate cumulative service tape will not be provided. ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 9 ¯ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 10 DLF For MVS Program Directory ¯ ÿ ÿ 5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS ÿ ÿ ÿ The following sections identify the system requirements for installing ÿ and activating DLF For MVS. The following terminology is used: ÿ ÿ ¯ Driving system: the system used to install the program. ÿ ÿ ¯ Target system: the system on which the program is installed. ÿ ÿ In many cases, the same system can be used as both a driving system ÿ and a target system. However, you may want to set up a clone of your ÿ system to use as a target system by making a separate IPL-able copy of ÿ the running system. The clone should include copies of all system ÿ libraries that SMP/E updates, copies of the SMP/E CSI data sets that ÿ describe the system libraries, and your PARMLIB and PROCLIB. ÿ ÿ Some cases where two systems should be used include the following: ÿ ÿ ¯ When installing a new level of a product that is already ÿ installed, the new product will delete the old one. By installing ÿ onto a separate target system, you can test the new product while ÿ still keeping the old one in production. ÿ ÿ ¯ When installing a product that shares libraries or load modules ÿ with other products, the installation can disrupt the other ÿ products. Installing onto a test system or clone will allow you ÿ to assess these impacts without disrupting your production system. ÿ ÿ 5.1 DRIVING SYSTEM REQUIREMENTS ÿ ÿ This section describes the environment of the driving system required ÿ to install DLF For MVS. ÿ ÿ 5.1.1 MACHINE REQUIREMENTS ÿ ÿ The driving system can run in any hardware environment that supports ÿ the required software as described in 5.2.1, "Operating System ÿ Requirements" ÿ ÿ 5.1.2 PROGRAMMING REQUIREMENTS ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 7. Driving System Software Requirements » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PROGRAM » PRODUCT NAME AND » ÿ » NUMBER » MINIMUM VRM/SERVICE LEVEL » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » 5668-949» System Modification Program/Extended (SMP/E) 1.8.0 or » ÿ » » higher » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ 5.2 TARGET SYSTEM REQUIREMENTS ÿ ÿ This section describes the environment of the target system required ÿ to install and use DLF For MVS. ÿ ÿ 5.2.1 OPERATING SYSTEM REQUIREMENTS ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 8 (Page 1 of 2). Driving System Software Requirements » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PROGRAM » PRODUCT NAME AND » ÿ » NUMBER » MINIMUM VRM/SERVICE LEVEL » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » 5695-047» MVS/ESA SP JES2 Version 4 Release 3 or higher » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 11 ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 8 (Page 2 of 2). Driving System Software Requirements » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » PROGRAM » PRODUCT NAME AND » ÿ » NUMBER » MINIMUM VRM/SERVICE LEVEL » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » 5695-048» MVS/ESA SP JES3 Version 4 Release 3 or higher » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ 5.2.2 MACHINE REQUIREMENTS ÿ ÿ The target system can run in any hardware environment that supports ÿ the required software. ÿ ÿ 5.2.3 PROGRAMMING REQUISITES ÿ ÿ 5.2.3.1 MINIMUM REQUISITES ÿ ÿ A minimum requisite is defined as one of the following: ÿ ÿ 1. Installation Requisite: A product that is required at ÿ installation time. i.e. this product WILL NOT INSTALL successfully ÿ unless this requisite is met. This includes products that are ÿ specified as REQs, PREs, or CALLLIBs. ÿ ÿ 2. Run Time Requisite: A product that is NOT required for the ÿ successful installation of this product, but IS needed at run time ÿ in order for this product to work. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 9. Minimum Requisites » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ » ÿ » » PRODUCT NAME AND » INSTALL » ÿ » PROGRAM NUMBER » MINIMUM VRM/SERVICE LEVEL » REQ? » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » 5668-949 » System Modification Program/Extended » Yes » ÿ » » (SMP/E) 1.8.0 or higher » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ÿ ÿ 5.2.3.2 FUNCTIONAL REQUISITES ÿ ÿ A functional requisite is defined as a product that is not required ÿ for the successful installation of this product or for the base ÿ function of the product, but is needed at run time for a specific ÿ function of this product to work. This includes products that are ÿ specified as IF REQs. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 10. Functional Requisites » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ » ÿ » » PRODUCT NAME AND » » » ÿ » PROGRAM » MINIMUM VRM/SERVICE » » INSTALL » ÿ » NUMBER » LEVEL » FUNCTION » REQ? » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » ÿ » 5748-XX9 » Document Composition » SCRIPT/VS Formatter » No » ÿ » » Facility Version 1 » » » ÿ » » Release 4 or higher » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¨ ¨ ¨ » ÿ » Any ONE of the following: » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ » ÿ » 5695-DF1 » DFSMS Version 1 or » VSAM » No » ÿ » » higher » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » ÿ » 5665-XA3 » DFP Version 3 or » VSAM » No » ÿ » » higher » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » ÿ » 5645-001 » OS/390 Version 1 or » VSAM » No » ÿ » » higher » » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ÿ ÿ ÿ 12 DLF For MVS Program Directory ¯ ÿ ÿ 5.2.3.3 TOLERATION/COEXISTENCE REQUISITES ÿ ÿ A toleration/coexistence requisite is defined as a product which must ÿ be present on a sharing system. These systems can be other systems in ÿ a multisystem environment (not necessarily sysplex), a shared DASD ÿ environment (such as test and production), or systems that reuse the ÿ same DASD at difference time intervals. DLF does not have any ÿ toleration requisites. ÿ ÿ 5.2.3.4 SPECIAL CONSIDERATIONS ÿ ÿ None ÿ ÿ 5.2.4 DASD STORAGE REQUIREMENTS ÿ ÿ DLF For MVS libraries can reside on any IBM MVS supported DASD. ÿ ÿ Figure 11 lists the total space required for each type of library. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 11. Total DASD Space Required (in 3390 tracks) by DLF For » ÿ » MVS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ » ÿ » LIBRARY TYPE » TOTAL SPACE REQUIRED » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Target » 16 tracks » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » ÿ » Distribution » 22 tracks » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ÿ ÿ NOTES: ÿ ÿ 1. You may wish to revise these numbers based on your plans for ÿ adding additional function or service. ÿ ÿ 2. IBM recommends use of system determined blocksizes for efficient ÿ DASD utilization for all non-RECFM U data sets. For RECFM U data ÿ sets, IBM recommends a blocksize of 32760, which is the most ÿ efficient from a performance and DASD utilization perspective. ÿ ÿ If you choose not to use system determined blocksizes, use the ÿ blocksizes and numbers of blocks specified to allocate the data ÿ sets. Data sets can be reblocked to a larger size. Please note ÿ that the maximum allowable blocksize will depend on the type of ÿ DASD on which the dataset will reside; for example, the blocksize ÿ of datasets on a 3350 DASD cannot exceed 19,069. ÿ ÿ 3. Abbreviations used for the data set type are: ÿ ÿ U Unique data set used by only the FMID listed. In order to ÿ determine the correct storage needed for this data set, this ÿ table provides all required information; no other tables (or ÿ program directories) need to be referenced for the data set ÿ size. ÿ S Shared data set used by more than the FMID listed. In order ÿ to determine the correct storage needed for this data set, ÿ the storage size given in this table needs to be added to ÿ other tables (perhaps in other program directories). If the ÿ data set already exists, it must have enough free space to ÿ accommodate the storage size given in this table. ÿ ÿ If you currently have a previous release of this product installed ÿ in these libraries, the installation of this release will delete ÿ the old one and reclaim the space used by the old release and any ÿ service that had been installed. You can determine whether or not ÿ these libraries have enough space by deleting the old release with ÿ a dummy function, compressing the libraries, and comparing the ÿ space requirements with the free space in the libraries. ÿ ÿ For more information on the names and sizes of the required data ÿ sets, please refer to 6.1.7, "Allocate SMP/E Target and ÿ Distribution Libraries" on page 20. ÿ ÿ Installation Requirements and Considerations 13 ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 12. Storage Requirements for SMP/E Work Data Sets » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ » ÿ » » » D » R » L » » » NO. » » » ÿ » » T » S » E » R » » » OF » NO. » NO. » ÿ » » Y » O » C » E » NO. » » 3380/» OF » OF » ÿ » LIBRARY » P » R » F » C » OF » BLK » 9345 » 3390 » DIR » ÿ » DDNAME » E » G » M » L » BLKS » SIZE » TRKS » TRKS » BLKS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPWRK1 » S » PO » FB » 80 » -- » -- » -- » 75 » 50 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPWRK2 » S » PO » FB » 80 » -- » -- » -- » 75 » 50 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPWRK3 » S » PO » FB » 80 » -- » -- » -- » 75 » 50 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPWRK4 » S » PO » FB » 80 » -- » -- » -- » 75 » 50 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPWRK6 » S » PO » FB » 80 » -- » -- » -- » 75 » 50 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SYSUT1 » U » PS » -- » -- » -- » -- » -- » 75 » 0 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SYSUT2 » U » PS » -- » -- » -- » -- » -- » 75 » 0 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SYSUT3 » U » PS » -- » -- » -- » -- » -- » 75 » 0 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SYSUT4 » U » PS » -- » -- » -- » -- » -- » 75 » 0 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ The following table provides an estimate of the storage needed in the ÿ SMP/E data sets for DLF For MVS. The estimates must be added to those ÿ of any other programs and service being installed to determine the ÿ total additional storage requirements. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 13. Storage Requirements for SMP/E Data Sets » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ » ÿ » » » D » R » L » » » NO. » » » ÿ » » T » S » E » R » » » OF » NO. » NO. » ÿ » » Y » O » C » E » NO. » » 3380/» OF » OF » ÿ » LIBRARY » P » R » F » C » OF » BLK » 9345 » 3390 » DIR » ÿ » DDNAME » E » G » M » L » BLKS » SIZE » TRKS » TRKS » BLKS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPMTS » S » PO » FB » 80 » 16 » 6160 » -- » 2 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPPTS » S » PO » FB » 80 » 48 » 6160 » -- » 6 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPSCDS » S » PO » FB » 80 » 16 » 6160 » -- » 2 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » » » ÿ » SMPSTS » S » PO » FB » 80 » 16 » 6160 » -- » 2 » 1 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ The following figures list the target and distribution libraries (data ÿ sets) and their attributes required to install DLF For MVS. The ÿ storage requirements of DLF For MVS must be added to the storage ÿ required by other programs having data in the same data set (library). ÿ A 10% additional growth factor has been added into the library size. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 14. Storage Requirements for DLF For MVS Target Libraries » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ ¼ ¼ ¼ » ÿ » » » D » R » L » » » » ÿ » » T » S » E » R » » » NO. » ÿ » » Y » O » C » E » NO. » » OF » ÿ » LIBRARY » P » R » F » C » OF » BLK » DIR » ÿ » DDNAME » E » G » M » L » BLKS » SIZE » BLKS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » DLFLOAD » U » PO» U » 0 » 51 » 6144 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » DLFASM » U » PO» FB » 80 » 93 » 3120 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » DLFMACS » U » PO» FB » 80 » 10 » 3120 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » DLFSAMP » U » PO» FB » 80 » 13 » 3120 » 1 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ 14 DLF For MVS Program Directory ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 15. Storage Requirements for DLF For MVS Distribution » ÿ » Libraries » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ ¼ ¼ ¼ ¼ ¼ » ÿ » » » D » R » L » » » » ÿ » » T » S » E » R » » » NO. » ÿ » » Y » O » C » E » NO. » » OF » ÿ » LIBRARY » P » R » F » C » OF » BLK » DIR » ÿ » DDNAME » E » G » M » L » BLKS » SIZE » BLKS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » DLFDIST » U » PO » U » 0 » 101 » 6144 » 12 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » ADLFASM » U » PO » FB » 80 » 93 » 3120 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » ADLFMACS » U » PO » FB » 80 » 10 » 3120 » 1 » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » » ÿ » ADLFSAMP » U » PO » FB » 80 » 13 » 3120 » 1 » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ 5.3 FMID DELETED ÿ ÿ Installing DLF For MVS will result in the deletion of the following ÿ FMID: ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 16. FMID Deleted » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ » ÿ » DELETED » DELETING » » ÿ » FMID » FMID » DESCRIPTION » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » HSL1202 » HSL1302 » DLF » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » HSL1102 » HSL1302 » DLF » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Installation Requirements and Considerations 15 ¯ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 16 DLF For MVS Program Directory ¯ ÿ ÿ 6.0 INSTALLATION INSTRUCTIONS ÿ ÿ ÿ This chapter describes the installation method and the step-by-step ÿ procedures to install and to activate the functions of DLF For MVS. ÿ ÿ Please note the following: ÿ ÿ ¯ If you want to install DLF For MVS into its own SMP/E environment, ÿ consult the SMP/E manuals for instructions on creating and ÿ initializing the SMPCSI and the SMP/E control data sets. ÿ ÿ ¯ Sample jobs have been provided to help perform some or all of the ÿ installation tasks. The SMP/E jobs assume that all DDDEF entries ÿ required for SMP/E execution have been defined in the appropriate ÿ zones. ÿ ÿ ¯ The SMP/E dialogs may be used instead of the sample jobs to ÿ accomplish the SMP/E installation steps. ÿ ÿ 6.1 INSTALLING DLF FOR MVS ÿ ÿ 6.1.1 SMP/E CONSIDERATIONS FOR INSTALLING DLF FOR MVS ÿ ÿ This release of DLF For MVS is installed using the SMP/E RECEIVE, ÿ APPLY, and ACCEPT commands. The SMP/E dialogs may be used to ÿ accomplish the SMP/E installation steps. ÿ ÿ 6.1.2 SMP/E ENVIRONMENT ÿ ÿ Sample jobs are provided to assist you in installing DLF For MVS. ÿ After the RECEIVE step has been completed, the sample jobs can be ÿ found in SMPTLIB: IBM.HSL1302.F3. Make a copy of these jobs in your ÿ own library and modify them to use during the installation of DLF For ÿ MVS. ÿ ÿ NOTE: Prior to the RECEIVE step, the sample jobs are to be unloaded ÿ from the product tape itself. ÿ ÿ The sample jobs are: ÿ ÿ DSMIVL3A Sample job to allocate target and distribution ÿ libraries ÿ ÿ DSMIVL3B Sample DDDEF job ÿ ÿ DSMIVL3E Sample RECEIVE job ÿ ÿ DSMIVL3F Sample APPLY CHECK job ÿ ÿ DSMIVL3G Sample APPLY job ÿ ÿ DSMIVL3H Sample ACCEPT CHECK job ÿ ÿ DSMIVL3I Sample ACCEPT job ÿ ÿ 6.1.3 SMP/E OPTIONS SUBENTRY VALUES ÿ ÿ The recommended values for some SMP/E CSI subentries are shown in ÿ Figure 17. Use of values lower than these may result in failures in ÿ the installation process. DSSPACE is a subentry in the GLOBAL options ÿ entry. PEMAX is a subentry of the GENERAL entry in the GLOBAL options ÿ entry. Refer to the SMP/E manuals for instructions on updating the ÿ global zone. ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 17 ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » Figure 17. SMP/E Options Subentry Values » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » ¼ ¼ » ÿ » SUB-ENTRY » VALUE » COMMENT » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » DSSPACE » (150,150,100)TRK » Recommended value for DLF For MVS » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » ÿ » PEMAX » 9999 » The SMP/E default is larger than » ÿ » » » what can be specified here » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ÿ ÿ 6.1.4 UNLOAD SAMPLE JOBS FROM PRODUCT TAPE ÿ ÿ Sample installation jobs are provided on the distribution tape to help ÿ you install DLF For MVS. The following sample job will copy the DLF ÿ For MVS installation jobs from the tape. Add a job card and modify ÿ the parameters in boldface to uppercase values to meet your site's ÿ requirements before submitting. ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ÿ » //STEP1 EXEC PGM=IEBCOPY » ÿ » //SYSPRINT DD SYSOUT=A » ÿ » //IN DD DSN=IBM.HSL1302.F3,UNIT=TUNIT,VOL=SER=SL1302, » ÿ » // LABEL=(4,SL),DISP=(OLD,KEEP) » ÿ » //OUT DD DSNAME=DLF.JCLLIB, » ÿ » // DISP=(NEW,CATLG,DELETE), » ÿ » // VOL=SER=DASDVOL,UNIT=DUNIT, » ÿ » // DCB=*.STEP1.IN,SPACE=(8800,(5,2,5)) » ÿ » //SYSUT3 DD UNIT=SYSDA,SPACE=(CYL,(1,1)) » ÿ » //SYSIN DD * » ÿ » COPY INDD=IN,OUTDD=OUT » ÿ » /* » ÿ » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ Figure 18. Unload - Sample Unload tape job ÿ ÿ where TUNIT is the unit value matching the product tape or cartridge, ÿ DLF.JCLLIB is the name of the data set where the sample jobs will ÿ reside, DASDVOL is the volume serial of the DASD device where the data ÿ set will reside, and DUNIT is the DASD unit type of the volume. ÿ ÿ All future references will be to the sample data set name DLF.jcllib ÿ in this program directory. ÿ ÿ You can also access the sample installation jobs by performing an ÿ SMP/E RECEIVE for FMID HSL1302, and then copying the jobs from data ÿ set HLQ.IBM.HSL1302.F3 to a work dataset for editing and submission. ÿ ÿ 6.1.5 DELETE PREVIOUS LEVEL OF DLF FOR MVS, IF APPLICABLE ÿ ÿ If you are replacing a lower service level of DLF For MVS, it is ÿ recommended to delete DLF For MVS from the system prior to installing ÿ the new service level of DLF For MVS. Since integrated service has ÿ deleted and added members in DLF For MVS, deleting the previous level ÿ will assure the accuracy of the SMP/E environment. ÿ ÿ The JCL in Figure 19 on page 19 is a sample job to DELETE DLF For MVS ÿ prior to installing the service updated DLF For MVS Create JCL similar ÿ to this example, modify the job to specify the appropriate parameters ÿ for your installation, then run the job. ÿ ÿ NOTE: This step is run only if you are replacing a lower service ÿ level of the DLF For MVS product, FMID HSL1302. ÿ ÿ ÿ ÿ ÿ 18 DLF For MVS Program Directory ¯ ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ÿ » //DELFUNCT JOB 'account #','name',MSGLEVEL=(1,1) » ÿ » //************************************************************* » ÿ » //* JOB TO DELETE PREVIOUS LEVEL OF DLF * » ÿ » //* MAKE THE FOLLOWING MODIFICATIONS: * » ÿ » //* 1) CHANGE THE JOB CARD TO MEET YOUR LOCAL REQUIREMENTS * » ÿ » //* 2) CHANGE #globalcsi TO THE DATA SET NAME OF YOUR * » ÿ » //* GLOBAL CSI DATA SET * » ÿ » //* 3) CHANGE #tzone TO THE NAME OF YOUR TARGET ZONE * » ÿ » //* 4) CHANGE #dzone TO THE NAME OF YOUR DISTRIBUTION ZONE * » ÿ » //* * » ÿ » //************************************************************* » ÿ » //DELETE EXEC PGM=GIMSMP,REGION=4096K » ÿ » //SMPCSI DD DSN=#globalcsi, » ÿ » // DISP=SHR » ÿ » //SMPPTFIN DD * » ÿ » ++FUNCTION(DELFUNC). » ÿ » ++VER(Z038) DELETE(HSL1302). » ÿ » //SMP.SMPCNTL DD * » ÿ » SET BDY(GLOBAL). » ÿ » RECEIVE SELECT(DELFUNC) /* RECEIVE THE FUNCTION */. » ÿ » » ÿ » SET BDY(#tzone). » ÿ » APPLY SELECT(DELFUNC) /* APPLY THE FUNCTION */. » ÿ » » ÿ » SET BDY(#dzone). » ÿ » ACCEPT SELECT(DELFUNC) /* ACCEPT THE FUNCTION */. » ÿ » » ÿ » SET BDY(#tzone) /* DELETE SYSMOD ENTRY */. » ÿ » UCLIN /* FROM THE TARGET ZONE */. » ÿ » DEL SYSMOD(HSL1302). » ÿ » ENDUCL. » ÿ » » ÿ » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ÿ » SET BDY(#dzone) /* DELETE SYSMOD ENTRY */. » ÿ » UCLIN /* FROM THE DLIB ZONE */. » ÿ » DEL SYSMOD(HSL1302). » ÿ » ENDUCL. » ÿ » » ÿ » SET BDY(GLOBAL) /* DELETE SYSMOD ENTRY */ » ÿ » /* FROM THE GLOBAL ZONE */. » ÿ » REJECT HOLDDATA NOFMID » ÿ » DELETEFMID » ÿ » (DELFUNC,HSL1302). » ÿ » /* » ÿ » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ Figure 19 (Part 2 of 2). DELETE Job to delete previous level of DLF ÿ For MVS ÿ ÿ EXPECTED RETURN CODES AND MESSAGES: A return code of '4' should be ÿ received from this job. ÿ ÿ 6.1.6 PERFORM SMP/E RECEIVE ÿ ÿ Edit and submit sample job DSMIVL3E in DLF.jcllib to perform the SMP/E ÿ RECEIVE for DLF For MVS. ÿ ÿ You will need to modifications to this job. Follow the comments in ÿ the job. ÿ ÿ NOTE: If you obtained DLF For MVS as part of a CBPDO, you can use ÿ the RCVPDO job found in the CBPDO RIMLIB data set to RECEIVE the DLF ÿ For MVS FMID as well as any service, HOLDDATA, or preventive service ÿ planning (PSP) information included on the CBPDO tape. For more ÿ information, refer to the documentation included with the CBPDO. ÿ ÿ EXPECTED RETURN CODES AND MESSAGES: ÿ ÿ Installation Instructions 19 ¯ ÿ ÿ Return code 0 is to be posted for all job steps. ÿ ÿ 6.1.7 ALLOCATE SMP/E TARGET AND DISTRIBUTION LIBRARIES ÿ ÿ Edit and submit sample job DSMIVL3A in DLF.jcllib to allocate the ÿ SMP/E target and distribution libraries for DLF For MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ DLFLOAD must be an authorized program library. ÿ ÿ If installing the DCF DLF Environment Feature (JSR1311) the DLFLOAD ÿ space allocation should be (CYL,(20,10,10). ÿ ÿ EXPECTED RETURN CODES AND MESSAGES: ÿ ÿ Return code 0 is to be posted for all job steps. ÿ ÿ 6.1.8 DDDEF ENTRIES - ADDING TO YOUR SMP/E PROCEDURE ÿ ÿ Job DSMIVL3B defines the DDDEFs which are needed to install DLF For ÿ MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ EXPECTED RETURN CODES AND MESSAGES: ÿ ÿ Return code 0 if the DDDEFs previously existed rc 4 if they did not. ÿ You will get message GIM27701W if DDDEF entry was added instead of ÿ replaced. ÿ ÿ 6.1.9 PERFORM SMP/E APPLY CHECK ÿ ÿ Edit and submit sample job DSMIVL3F in DLF.jcllib to perform an SMP/E ÿ APPLY CHECK for DLF For MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ EXPECTED RETURN CODES AND MESSAGES: ÿ ÿ Return code 0 or 4 is received for all job steps with messages for DLF ÿ For MVS. The Return code is based on the level of SMP/E and/or the ÿ binder of the operating system. ÿ ÿ Messages GIM23903W or GIM23913W depending on the SMP/E service level ÿ that you have on your driving system during Link-Edit processing for ÿ modules. The return code is 04 and is acceptable. ÿ ÿ Message IEW2609W for conflicting link edit attributes when using the ÿ binder. The return code is 04 and is acceptable. ÿ ÿ 6.1.10 PERFORM SMP/E APPLY ÿ ÿ Edit and submit sample job DSMIVL3G in DLF.jcllib to perform an SMP/E ÿ APPLY for DLF For MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ Return code 0 or 4 is received for all job steps with messages for DLF ÿ For MVS. The Return code is based on the level of SMP/E and/or the ÿ binder of the operating system. ÿ ÿ Messages GIM23903W or GIM23913W depending on the SMP/E service level ÿ that you have on your driving system during Link-Edit processing for ÿ modules. The return code is 04 and is acceptable. ÿ ÿ ÿ 20 DLF For MVS Program Directory ¯ ÿ ÿ Message IEW2609W for conflicting link edit attributes when using the ÿ binder. The return code is 04 and is acceptable. ÿ ÿ 6.1.11 PERFORM SMP/E ACCEPT CHECK ÿ ÿ Edit and submit sample job DSMIVL3H in DLF.jcllib to perform an SMP/E ÿ ACCEPT CHECK for DLF For MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ EXPECTED RETURN CODES ÿ ÿ Return code 0 is received for all job steps if DLF For MVS is being ÿ installed. ÿ ÿ 6.1.12 PERFORM SMP/E ACCEPT ÿ ÿ Edit and submit sample job DSMIVL3I in DLF.jcllib to perform an SMP/E ÿ ACCEPT for DLF For MVS. ÿ ÿ You will need to make modifications to this job. Follow the comments ÿ in the job. ÿ ÿ EXPECTED RETURN CODES : ÿ ÿ Return code 0 is received for all job steps if DLF For MVS is being ÿ installed. ÿ ÿ 6.2 INSTALLATION VERIFICATION PROCEDURE ÿ ÿ Use the DLF For MVS Installation Verification Procedure (IVP) to ÿ ensure that DLF For MVS has been correctly installed. Three jobs have ÿ been placed in the data set DLF.R30.DLFSAMP that can be used for the ÿ IVP. The installation verification jobs described in steps 2 through ÿ 4 are included as members DSMIVL30, DSMIVL31, and DSMIVL32 in the ÿ DLFSAMP target library. Edit these JCL statements to fit your ÿ installation and then use them to run the sample IVP. ÿ ÿ 1. If you choose, define a VSAM user catalog. Refer to Access Method ÿ Services, for information on VSAM catalogs and the use of the ÿ DEFINE commands. In order to have password protect the catalog in ÿ which the document library data sets are defined. ÿ ÿ 2. Define the VSAM data sets for the document library, either in the ÿ VSAM master catalog or in a user catalog. You must use the VSAM ÿ Acess Method Services DEFINE CLUSTER command to create each of the ÿ two required data sets. ÿ ÿ 3. Use DSMSPEXC to set up a test document library. To initilize the ÿ library, issue a DEFINE SYSTEM command followed by a DEFINE USER ÿ command for a DLF administrator in the same JOB step. Refer to ÿ the Document Library Facility Guide for more informaiton on ÿ setting up a document library. ÿ ÿ NOTE: Columns 73-80 of DLF command statements are not reserverd ÿ for sequence numbers. To avoid command statement errors, be sure ÿ these statements are not sequenced numbered. ÿ ÿ You can expect the following system messages at this time. They ÿ can be ignored. ÿ ÿ IEC130I DSMINDIR DD statement missing ÿ IEC070I 104-203, ...,... DSMPTLIB ÿ ÿ 4. Execute the job containing sample DLF commands. You can verify ÿ that the DLF has been correctly installed by executing a typical ÿ IMPORT and EXPORT function. In this case the output produced by ÿ EXPORT is a copy of the sample data included for the IMPORT ÿ command. ÿ ÿ ÿ Installation Instructions 21 ¯ ÿ ÿ 6.2.1 POST INSTALL CONSIDERATIONS ÿ ÿ If you are a new DLF user, define the document library for your ÿ installation as described in the Document Library Facility Guide ÿ Chapter 6, 'Setting Up the Document Library'. ÿ ÿ If you are currently using Release 1 of DLF, the structure of the ÿ library data sets changed from Release 1 to Release 3. Appendix A of ÿ the Document Library Facility Guide, describes the process for ÿ converting from Release 1 to Release 3. ÿ ÿ If you are currently using Release 2 of DLF, the structure of the data ÿ sets is the same for Release 3. No conversion is required. ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 22 DLF For MVS Program Directory ¯ ÿ ÿ APPENDIX A. DLF FOR MVS INSTALL LOGIC ÿ ÿ ÿ A.1 SMP/E MODIFICATION CONTROL STATEMENTS ÿ ÿ A.1.1 FOR FMID HSL1302 ÿ ÿ ++FUNCTION(HSL1302 ) FESN(6296503 ) REWORK(1998180 ) ÿ RFDSNPFX(IBM ) FILES(4) ÿ /* ÿ THIS PRODUCT CONTAINS RESTRICTED MATERIALS OF IBM ÿ - 5748-XXE COPYRIGHT IBM CORP 1978, 1983 ÿ LICENSED MATERIAL - PROGRAM ÿ PROPERTY OF IBM ÿ REFER TO COPYRIGHT INSTRUCTIONS ÿ FORM NUMBER G120-2083 ÿ */ ÿ . ÿ ++VER(Z038 ) DELETE(HSL1200 HSL1202 ) ÿ SUP(AL00566 AL02847 AL07567 AL13001 AL29589 ÿ AL31092 AL35919 AL48730 AL48733 AL59612 ÿ AL63734 AN83969 AP22737 AP31368 AP31955 ÿ AP31960 AP31964 AP31965 AP31966 AP31979 ÿ AP32028 AP32029 AP32032 AP37908 AP38835 ÿ AP39086 AP42610 AP44267 AP44269 AP44543 ÿ AP45842 AP46220 AP48472 AP48666 AP50928 ÿ AP52393 AQ16495 UL00745 UL01704 UL03195 ÿ UL16255 UL35208 UL39101 UL44534 UL60495 ÿ UL65102 UL75507 UL75814 UL90020 UN98513 ÿ UP45660 UP48200 UP49292 UP49429 UP58109 ÿ UP60441 UP61277 UP61816 UP68655 UP68906 ÿ UP73087 UP73089 UP73154 UP76528 UP90233 ÿ UP90235 UQ19038 ) . ÿ ++IF FMID(JSR1311 ) REQ(UP68904 ) . ÿ ++JCLIN RELFILE(1) . ÿ ÿ The SMP/E Modification Control Statements (SMPMCS) for DLF For MVS are ÿ contained in the SMPMCS file on the installation tape. The SMPMCS for ÿ the FMID in the product will be loaded to the SMPPTS dataset, with a ÿ member name matching the FMID, when the FMID is SMP/E RECEIVEd. You ÿ may browse or print these members using TSO/E, ISPF, or IEBGENER (or ÿ IEBPTPCH). ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ (C) Copyright IBM Corp. 1984,1998 23 ¯ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 24 DLF For MVS Program Directory ¯ ÿ ÿ APPENDIX B. READER'S COMMENTS ÿ ÿ ÿ PROGRAM DIRECTORY FOR DOCUMENT LIBRARY FACILITY RELEASE 3, ÿ MODIFICATION LEVEL 0 SMC9827 ÿ ÿ You may use this form to comment about this document, its ÿ organization, or subject matter with the understanding that IBM may ÿ use or distribute whatever information you supply in any way it ÿ believes appropriate without incurring any obligation to you. ÿ ÿ For each of the topics below please indicate your satisfaction level ÿ by circling your choice from the rating scale. If a statement does ÿ not apply, please circle N. ÿ ÿ ¬ÿÿÿ RATING SCALE ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ÿ » very very not » ÿ » satisfied <=====================> dissatisfied applicable » ÿ » 1 2 3 4 5 N » ÿ » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ ¼ ÿ » » SATISFACTION » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » ¼ ¼ ¼ ¼ ¼ » ÿ » Ease of product installation » 1 » 2 » 3 » 4 » 5 » N » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Contents of program directory » 1 » 2 » 3 » 4 » 5 » N » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Installation Verification Programs » 1 » 2 » 3 » 4 » 5 » N » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Time to install the product » 1 » 2 » 3 » 4 » 5 » N » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Readability and organization of program » 1 » 2 » 3 » 4 » 5 » N » ÿ » directory tasks » » » » » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Necessity of all installation tasks » 1 » 2 » 3 » 4 » 5 » N » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Accuracy of the definition of the » 1 » 2 » 3 » 4 » 5 » N » ÿ » installation tasks » » » » » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Technical level of the installation » 1 » 2 » 3 » 4 » 5 » N » ÿ » tasks » » » » » » » ÿ ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ¼ ÿ » » » » » » » » ÿ » Ease of getting the system into » 1 » 2 » 3 » 4 » 5 » N » ÿ » production after installation » » » » » » » ÿ ¨ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ] ÿ ¨ ¨ ¨ ¨ ¨ ¨ ÿ ÿ How did you order this product? ÿ ÿ __ CBIPO ÿ __ CBPDO ÿ __ CustomPac ÿ __ ServerPac ÿ __ Independent ÿ __ Other ÿ ÿ Is this the first time your organization has installed this product? ÿ ÿ __ Yes ÿ __ No ÿ ÿ Were the people who did the installation experienced with the ÿ installation of MVS products? ÿ ÿ __ Yes ÿ __ No ÿ ÿ (C) Copyright IBM Corp. 1984,1998 25 ¯ ÿ ÿ ÿ If yes, how many years? __ ÿ ÿ If you have any comments to make about your ratings above, or any ÿ other aspect of the product installation, please list them below: ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ 26 DLF For MVS Program Directory ¯ ÿ ÿ Please provide the following contact information: ÿ ÿ ____________________________________________________________ ÿ Name and Job Title ÿ ____________________________________________________________ ÿ Organization ÿ ____________________________________________________________ ÿ ÿ ____________________________________________________________ ÿ Address ÿ ____________________________________________________________ ÿ Telephone ÿ ÿ Thank you for your participation. ÿ ÿ Please send the completed form to (or give to your IBM representative ÿ who will forward it to the Document Library Facility Development ÿ group): ÿ ÿ IBM Printing Systems Company ÿ Box 1900 ÿ Boulder, Colorado 80301-9191 ÿ USA ÿ Attention: Dept. RJXA/003G ÿ FAX Number: (800) 524-1519 ÿ ÿ E-Mail: printpub@us.ibm.com ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Appendix B. Reader's Comments 27 ¯ ÿ ÿ IBM ÿ ÿ ÿ Program Number: 5748-XXE 5195 ÿ 5862 ÿ 5701 ÿ ÿ Printed in U.S.A.