IBM BladeCenter(TM) and IBM BladeCenter H (TM) Advanced Management Module Firmware Update System 8677 System 8852 System 8886 CONTENTS ________ 1.0 Overview 2.0 Installation and Setup Instructions 3.0 Unattended Mode 4.0 Web Sites and Support Phone Number 5.0 Trademarks and Notices 6.0 Disclaimer 7.0 IBM License Agreement for Machine Code 1.0 Overview ________________________ 1.1 This package will update the IBM Advanced Management Module software only. It will not affect any device drivers. This package contains several files. Unpack this package to gain access to the individual files within this package. 1.2 Enhancements - none 1.3. Level of Recommendations and Prerequisites for the update: - none 1.4 Dependencies: - none 2.0 Installing and Setup Instructions ______________________________________ To use this package, perform the following steps: a). Open a Web browser. In the address or URL field, type the IP address or host name of the Advanced Management Module to which you want to connect. The Enter Network Password window opens. Note: The Advanced Management Module defaults to DHCP. If a DHCP host is unavailable, the Advanced Management Module assigns a static IP address of 192.168.70.125 after 2 minutes. b). Type your user name and password in the Enter Network Password window. If you are using the IBM Advanced Management Module for the first time, you can obtain your user name and password from your system administrator. All login attempts are documented in the event log. A welcome page opens in your browser. Note: The Advanced Management Module is set initially with a user name of USERID and password of PASSW0RD (with a zero, not an O). This user has read/write access. Change this default password during your initial configuration for enhanced security. c). Select a timeout value, in minutes, in the field provided. If your browser is inactive for that number of minutes, the Advanced Management Module logs you off the Web interface. d). Click Continue to start the session. The browser opens the System Health page, which gives you a quick view of the system status. e). In the navigation frame, click MM Firmware Update under MM Control, then click Browse. f). Switch to the drive and directory containing the unpackaged files. Navigate to the PKT file you want to update. Note: There is one packet file that can be updated: CNETCMUS.PKT Do not restart the management module until CNETCMUS.PKT file has been flashed. g). Click Open. The file (including the full path) appears in the box beside Browse. h). To begin the update process, click Update. A progress indicator opens as the file is transferred to temporary storage on the Advanced Management Module. A confirmation page opens when the file transfer is completed. i). Verify that the PKT file shown on the Confirm Firmware Update page is what you intend to update. If not, click the Cancel button. j). To complete the update process, click Continue. A progress indicator opens as the firmware on the Advanced Management Module is flashed. A confirmation page opens to verify that the update was successful. k). If the CNETCMUS.PKT file has been flashed, continue with step 2l; otherwise repeat steps 2e through 2k until CNETCMUS.PKT has been flashed. l). After receiving a confirmation that the update process is complete, click the option "Restart MM" and click the Restart button. Click OK to confirm that you want to restart the Management Module. NOTE: Restarting the Advanced Management Module will disconnect your current session. m). Click OK to close the current browser window. n). To log into the Advanced Management Module again, open your browser and follow the regular login process. Note: To cancel this process at any point, click Cancel. 3.0 Unattended Mode ________________________ Unattended installation can be performed using the Advanced Management Module's CLI capabilities or via UpdateXpress BladeCenter scripts. The CLI can be used via telnet or SSH, and the update commands can be automated using scripts. Please refer to the IBM support web site for the CLI User Guide, specifically the "update" command. UpdateXpress BladeCenter scripts fully automate the Advanced Management Module's firmware update process. These scripts are available as part of the UpdateXpress distribution. 4.0 Web Sites and Support Phone Number _________________________________________ 4.1 IBM Support Web Site: http://www.ibm.com/support 4.2 IBM BladeCenter Web Site: http://www.ibm.com/systems/bladecenter/ 4.3 If you have any questions about this update, or problems applying the update, go to the following Directory of Worldwide Contacts at URL: http://www.ibm.com/planetwide 5.0. TradeMarks and Notices ______________________________ 5.1 The following terms are trademarks of the IBM Corporation in the United States, or other countries or both: * IBM * BladeCenter * Netfinity * Netfinity Manager * Advanced System Management Other company, product, and service names may be trademarks or service marks of others. 6.0. Disclaimer __________________ 6.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 6.2 Note to Government users: Note to U.S. Government users-- Documentation related to restricted rights-- Use, duplication and disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation. 7.0. IBM License Agreement for Machine Code ______________________________________________ You accept the terms of this IBM License Agreement for Machine Code ("Agreement") by your initial use of a Machine that contains Machine Code. The term "Machine Code" means microcode, basic input/output system code (called "BIOS"), utility programs, device drivers, and diagnostics delivered with an IBM Machine, and may sometimes be referred to as "Licensed Internal Code" or "LIC" in documentation or on the Machine with which the Machine Code was delivered. All such code, whether referred to or marked as Machine Code, Licensed Internal Code or LIC, is subject to this license. Machine Code does not include programs and code provided under separate license agreements, including but not limited to open source license agreements. Acceptance of these license terms authorizes you to use Machine Code with the specific product for which it is provided. The term "Machine" means an IBM machine, its features, conversions, upgrades, elements or accessories, or any combination of them. A Machine may include computing resources or capabilities that are to remain inactive, or whose use is restricted, until the right to access and use the resources or capabilities is properly acquired for the Machine directly from IBM or through an authorized IBM reseller (called "Built-in- Capacity"). Examples of such computing resources and capabilities include but are not limited to processors, memory, storage, processing capacity identified as interactive processing capacity, and workload-specific resources or capabilities (such as a specific operating system, programming language or application to which use of the Machine is limited). International Business Machines Corporation or one of its subsidiaries (collectively "IBM") owns copyrights in Machine Code or has the right to license Machine Code. IBM or a third party owns all copies of Machine Code, including all copies made from them. IBM licenses Machine Code to only one rightful possessor at a time. If you are the rightful possessor of a Machine, IBM grants you a nonexclusive license to use Machine Code (or any replacement IBM provides) on, or in conjunction with, only the Machine for which IBM provided it, and only to the extent of IBM authorizations you have acquired for access to and use of Built-in-Capacity. If your use of Built-in- Capacity exceeds the IBM authorizations you have acquired for the Machine, you agree to pay IBM or (if applicable) an authorized IBM reseller the full price of permanent, unrestricted use of the Built-in-Capacity at the then current price. You are not authorized to use such Built-in-Capacity until such payment is made. Under each license, IBM authorizes you to do only the following: 1. execute Machine Code to enable the Machine to function according to its Official Published Specifications (called "Specifications"). 2. use only the Built-in-Capacity properly acquired for the Machine directly from IBM or through an authorized IBM reseller; 3. make a reasonable number of copies of Machine Code to be used solely for backup or archival purposes, provided you reproduce the copyright notice and any other legend of ownership on any such copies. You may use the copies only to replace the original, when necessary; and 4. execute and display Machine Code as necessary to maintain the Machine. You agree to acquire any replacement for, or additional copy of, Machine Code directly from IBM in accordance with IBM’s standard policies and practices. You also agree to use that Machine Code under these terms. You may transfer possession of Machine Code and its media to another party only with the transfer of the Machine on which that Machine Code is authorized. If you do so, you agree to 1) destroy all your copies of that Machine Code that were not provided by IBM, 2) either give the other party all your IBM-provided copies of Machine Code or destroy them, and 3) give the other party a copy of these terms and provide all user documentation to that party. IBM licenses the other party to use Machine Code when that party accepts the terms of this Agreement. These terms apply to all Machine Code you acquire from any source. Your license for Machine Code terminates when you no longer rightfully possess the associated Machine. No other rights are granted under this license. You agree to use Machine Code only as authorized above. You may not do, for example, any of the following: 1. otherwise copy, display, transfer, adapt, modify, or distribute (electronically or otherwise) Machine Code, except as IBM may authorize in a Machine’s user documentation or in writing to you; 2. reverse assemble, reverse compile, or otherwise translate Machine Code, unless expressly permitted by applicable law without the possibility of contractual waiver; 3. sublicense or assign the license for Machine Code; or 4. lease Machine Code or any copy of it. Built-in-Capacity is protected by certain technological measures in Machine Code. You agree to IBM's implementation of such technological measures to protect Built-in- Capacity, including measures that may impact availability of data or performance of your Machine. As a condition of your license to use Machine Code under this Agreement, you may not circumvent such technological measures, or use a third party or third party product to do so, or otherwise access or use unauthorized Built-in-Capacity. In the event IBM determines that changes are necessary to the technological measures designed to limit access to, or use of, Built-in-Capacity to that which has been authorized, IBM may provide you with changes to such technological measures. As a condition of your license to use Machine Code under this Agreement, you agree, at IBM’s option, to apply or allow IBM to apply such changes. If you obtained Machine Code directly from IBM and an IBM Customer Agreement or equivalent agreement is in effect between you and IBM ("ICA"), then the terms of this Agreement are incorporated by reference into that ICA. If no ICA is in effect, or if you obtained Machine Code from an IBM authorized reseller or other third party, then the terms of IBM’s Statement of Limited Warranty are incorporated into this Agreement by reference and apply to any questions or claims regarding warranty, liability, governing law or jurisdiction for Machine Code. If there is a conflict between the terms of this Agreement and those of the ICA or those of IBM’s Statement of Limited Warranty, as applicable, the terms of this Agreement prevail, but only to the extent of such conflict.