============================================================================= Readme File for System i Access for Windows Service Packs 5761-XE1 V6R1M0 Cumulative Service Pack Level ------------- SI37891 ------------- (c) Copyright IBM Corporation 2010. All rights reserved. ============================================================================= PLEASE READ: --------------------- Microsoft has released a security update that is now a prerequisite for all future V6R1 IBM i Access for Windows service packs. For information about the security update and how to install it, please see: http://www-03.ibm.com/systems/i/software/access/windows/casp.html Windows 7 Support --------------------- Starting with service pack level SI35607 System i Access for Windows supports running on Windows 7. Please see Information APAR II14522 for issues related to using iSeries Access for Windows on Windows 7. NOTICE: ------- Application of this PTF may disable or render ineffective programs that use system memory addresses not generated by the IBM translator, including programs that circumvent control technology designed to limit interactive capacity to purchased levels. This PTF may be a prerequisite for future PTFs. By applying this PTF you authorize and agree to the foregoing. This PTF is subject to the terms of the license agreement which accompanied, or was contained in, the Program for which you are obtaining the PTF. You are not authorized to install or use the PTF except as part of a Program for which you have a valid Proof of Entitlement. SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT, REGARDING THE PTF. The applicable license agreement may have been provided to you in printed form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR) CL command. ----------------- Table of Contents ----------------- 1.0 INSTALLATION INSTRUCTIONS 1.1 INSTALLING FROM A System i 1.2 COMBINING THE SERVICE PACK WITH A System i ACCESS FOR WINDOWS INSTALL IMAGE 1.3 INSTALLING A SECONDARY LANGUAGE 2.0 RECOMMENDATIONS/RESTRICTIONS 2.1 System i SERVER FIXES 2.2 APPLICATION DEVELOPMENT FUNCTION WITHIN System i NAVIGATOR 3.0 AUTHORIZED PROGRAM ANALYSIS REPORT (APAR) ABSTRACTS - SERVICE PACK LEVEL = SI37891 (April 2010) 4.0 INSTALL/UNINSTALL CONSIDERATIONS 4.1 REMOVING THE SERVICE PACK 4.2 UNABLE TO INSTALL FROM THE SERVICE SOURCE? 4.3 SERVICE PACK CONTROL 5.0 DATA TRANSFER CONSIDERATIONS 5.1 TRANSFERRING DATA WHEN THE FILE OR DATA CCSID IS 65535 --------------------------------------------------------------------- 1.0 INSTALLATION INSTRUCTIONS ------------------------------ 1.1 INSTALLING FROM A System i -------------------------------------- The following method would be used if you have received the System i Access for Windows service pack through the System i PTF ordering process either as an individual PTF order or as part of an i5/OS PTF cumulative package. Once this service pack has been applied to a System i with the LODPTF and APYPTF System i commands, it can be installed on individual PC's with the "Check Service Level" shortcut in the System i Access for Windows Service folder. Check Service Level, controlled by the System i Access for Windows Properties Service tab, will detect that the Service source directory has been updated, and will present the user with the option to install the service pack at startup time as well. The APYPTF command will update each of the System i Access for Windows install image directories (\QIBM\ProdData\Access\Windows\image32, \QIBM\ProdData\Access\Windows\image64a and \QIBM\ProdData\Access\Windows\image64i) on the System i. Any client that installs System i Access for Windows (or selected features) from one of these images will automatically receive this service pack level (no extra steps or reboots). In this scenario, the service pack cannot be uninstalled on the client PC because it is merged in with the base release. NOTE: The System i contains three System i Access for Windows install images, one for each processor architecture supported by System i Access for Windows: \QIBM\ProdData\Access\Windows\image32 for 32-bit (X86) based PCs, \QIBM\ProdData\Access\Windows\image64a for AMD64 based PCs and \QIBM\ProdData\Access\Windows\image64i for Itanium based PCs. Running setup.exe from the System i Access for Windows install image directory that matches your PC's processor type (\image32 for 32-bit (X86) based PCs, \image64a for AMD64 based PCs or \image64i for Itanium based PCs) will launch the install wizard for that specific architecture. Running cwblaunch.exe from the System i Access for Windows install image root directory (\QIBM\ProdData\Access\Windows) will determine your PC's processor architecture and accordingly launch the install wizard from the appropriate image directory. RMVPTF will restore your System i install image to the prior service level (or the base release if there was no prior service pack applied). 1.2 COMBINING THE SERVICE PACK WITH A System i ACCESS FOR WINDOWS INSTALL IMAGE -------------------------------------------------------------------------------- The following method could be used if you downloaded the service pack from the System i Access for Windows web page location: http://www-03.ibm.com/systems/i/software/access/ System i Access for Windows service pack PTFs are combined with the original System i Access for Windows installation images in \QIBM\ProdData\Access\Windows\image32, \QIBM\ProdData\Access\Windows\image64a and \QIBM\ProdData\Access\Windows\image64i. This means that a user can install (or upgrade) System i Access for Windows from one of these combined image directories and get the latest applied service level automatically in one integrated step - since the original installation images files have been replaced by updated versions via the service pack PTF. If your install image resides on a local or network drive, you can download the service pack from the System i Access for Windows web page. Then you can combine your installation image with the service pack in order to update it to the latest service level. You will need to create an administrative install image and then use the appropiate UPDATE.EXE download available in the service pack FTP directory to update the administrative image to the latest service pack level. NOTE: You can not combine a service pack with the image that was shipped with your System i Access for Windows DVD or your System i. You need to create a separate administrative image as explained below. To create the administrative install image follow these steps: 1. Open a command prompt window. 2. Change directories to the folder containing the System i Access for Windows install image. This can be the image on the System i, the image on the System i Access for Windows DVD or an image on a local or network drive. 3. Run the following command: SETUP.EXE /a The installation wizard will start. 4. If your install image has multiple language sources, you will be prompted to choose one as your Primary Language. 5. In the Network Location dialog, choose the target directory for your administrative image and click Install. The administrative image will be generated under the chosen directory. You only need to perform this process once. Subsequent service packs can be combined with the same administrative image. Once you have an administrative image, you can merge it with the service pack by following these steps: 1. Download UPDATE.EXE from the service pack FTP directory to a directory on your PC or server. NOTE: a separate version of the UPDATE.EXE download exists for each installation image type: for the 32-bit based image you must download UPDATE_32.EXE, for the 64-bit AMD based image download UPDATE_64A.EXE and for the Itanium based image download UPDATE_64I.EXE. 2. Open a command prompt window. 3. Change directories to the folder containing UPDATE.EXE. 4. Run the following command: UPDATE.EXE /v"/a X:\admin_image\cwbinstall.msi" where X:\admin_image denotes the drive and directory containing the administrative image. The installation wizard will start. 5. Follow the instructions in the wizard to start the update process. 4. The target administrative image will be updated to the new service level. 5. After completion, you can delete the downloaded UPDATE.EXE file, as it is no longer needed. A user that installs from the merged administrative image will get the latest applied service level automatically. Users that originally installed from the administrative image can reinstall by running SETUP.EXE from the merged image or by using the "Check Service Level" shortcut in the System i Access for Windows Service folder to get the latest service level. NOTE: Users that originally installed System i Access for Windows from the System i, from the System i Access for Windows DVD or from any other source that contains a non-administrative image, will not be able to reinstall from an administrative image. Only installations that were initially done from an administrative image can be updated by reinstalling from a merged administrative image. 1.3 INSTALLING A SECONDARY LANGUAGE ------------------------------------ Starting with service pack SI31390, customers can install secondary languages in V6R1M0 System i Access for Windows as in previous releases. You can install secondary languages from a System i platform that has both System i Access for Windows (5761–XE1) and the desired secondary language installed, or from the System i Access for Windows V6R1M0 DVD, as long as the client computers have the latest service level installed. The following instructions describe how to install secondary languages from a System i and from the DVD. Note: in the steps detailed below, you can use setup.exe instead of cwblaunch.exe as long as you are located in the ImageXX folder that contains the installation image that is right for your PC, i.e. Image32 for 32-bit based PCs, Image64a for AMD 64-bit and Image64i for Itanium. To install a secondary language from a System i In order to make secondary languages available to your users, you first need to apply System i Access for Windows PTF SI31390 or later on your System i. During a new installation: 1. Map a drive to the System i QIBM sharepoint (\\NetServerName\QIBM). 2. Double-click QIBM > ProdData > Access > Windows > cwblaunch.exe to start the setup program. 3. Choose a Custom installation to select which secondary languages and features you want installed to your PC. Note: If you select a Complete or a PC5250 User installation, no secondary languages will be installed by default. In this case, you can specify what secondary languages to install with the CWBADDSECLANG property from the command line, as explained below. 4. Complete the wizard. During an upgrade: 1. Map a drive to the System i QIBM sharepoint (\\NetServerName\QIBM). 2. Double-click QIBM > ProdData > Access > Windows > cwblaunch.exe to start the setup program. 3. Choose a Custom installation. If you had the secondary language installed in the previous version, the language will appear selected under the Languages node. You can select which secondary languages and features you want to add or remove. 4. Complete the wizard. Note: If you have secondary languages and the .NET Data Provider installed in the previous version, you must: 1. Use Selective Setup to uninstall the .NET Data Provider prior to upgrade. Upgrading .NET Data Provider secondary languages is not supported by System i Access for Windows V6R1M0. 2. Run cwblaunch.exe to start the upgrade as described above. To install a secondary language after System i Access for Windows has been installed: 1. Map a drive to the System i QIBM sharepoint (\\NetServerName\QIBM) 2. Double-click QIBM > ProdData > Access > Windows > cwblaunch.exe to start the setup program. 3. If your local installation is at an older service level than the level on the System i, the installation program will be launched in service pack mode. At this time you will not be able to add secondary languages yet. Complete the service pack wizard, then re-run cwblaunch.exe as pointed out in the next step. 4. Run cwblaunch.exe from QIBM > ProdData > Access > Windows to start the maintenance wizard. 5. Choose Modify to select which secondary languages you want installed on your PC. 6. Complete the wizard. To install a secondary language from the V6R1M0 System i Access for Windows DVD Since the V6R1M0 System i Access for Windows DVD was shipped without secondary language support,you first must install System i Access for Windows from the DVD, then download service pack SI31390 or later from the System i Access for Windows web site and install it on the PC, then re-run the installation from the DVD in order to install secondary languages. 1. Install the System i Access for Windows DVD by running Windows > cwblaunch.exe. 2. Download the latest service pack from the System i Access for Windows web site. Note: Make sure to download the service pack version that is right for your computer’s processor architecture. 3. Launch the service pack download on your PC in order to upgrade System i Access for Windows to the new service level. 4. From your DVD, double click Windows > cwblaunch.exe to start the maintenance wizard. 5. Choose Modify to select which secondary languages you want installed on your PC. 6. Complete the wizard. Using CWBADDSECLANG to add secondary languages A new public property named CWBADDSECLANG is available to specify secondary languages from the command line. This is particularly useful for unattended installations. Note that your local installation of System i Access for Windows V6R1M0 must be at service level SI31390 or greater. Otherwise, the CWBADDSECLANG property will be ignored. If System i Access for Windows is not yet installed, then your source installation image must be at service level SI31390 or greater. If you are installing from the System i Access for Windows V6R1M0 DVD then, after installing the DVD, you must download and install service pack SI31390 or later from the System i Access for Windows web site prior to use CWBADDSECLANG. To specify secondary languages at the command line: 1. Open a command prompt window. 2. Change directories to your installation image: - If you are installing from a System i, change directories to QIBM > ProdData > Access > Windows. - If you are installing from DVD, change directories to the Windows folder. 3. Type in the following command: cwblaunch /v"CWBADDSECLANG=mri29xx,mri29yy,…" Where mri29xx, mri29yy, etc. are the NLV codes of the languages that you want to install. Note: a list of 29xx NLV codes is available in the IBM i5/OS information web site at http://publib.boulder.ibm.com/infocenter/systems/scope/i5os/index.jsp Search for "National language version feature codes". 4. To install secondary languages silently, type in the following command: cwblaunch /s /v"/qb CWBADDSECLANG=mri29xx,mri29yy,…" 5. To install all languages available on your installation image, specify CWBADDSECLANG=ALL. 6. Complete the wizard. To install a secondary language from a custom DVD You can burn a DVD out from the updated image residing on your System i, and distribute this custom DVD to your users so they can install secondary languages from the DVD without needing to download the service pack from the web. 1. Apply System i Access for Windows PTF SI31390 or later on your System i. 2. Map a drive to the System i QIBM sharepoint (\\NetServerName\QIBM). 3. Burn the contents of QIBM > ProdData > Access > Windows to your DVD. Note: The three images under the Windows folder might not fit on a single DVD. In that case, you can burn just the image that is needed by your users -i.e. Image32, Image64a or Image64i. 4. Instruct your users to run cwblaunch.exe from the custom DVD in order to install secondary languages. The procedure is identical to the steps described under the section 'To install a secondary language from a System i' above. After you have installed the secondary language, use System i Access for Windows Properties to select the language you want to use. Notes: - You must run cwblaunch.exe –or setup.exe- in order to install secondary languages. You cannot install secondary languages from the Add or Remove Programs panel; in that case, the Languages node will not be available. 2.0 RECOMMENDATIONS/RESTRICTIONS --------------------------------- 2.1 System i SERVER FIXES -------------------------- In addition to installing the System i Access for Windows Service Pack, all servers should stay current on the latest Cumulative PTF Package, HIPER Group PTF, and Database Group PTF. Refer to IBM eServer System i Technical Support: Recommended fixes at http://www-912.ibm.com/s_dir/slkbase.nsf/recommendedfixes 2.2 Application Development function within System i Navigator --------------------------------------------------------------- The Application Development folder within System i Navigator is added when the System i Navigator Network component is installed. Application Administration can be used to restrict the display of the Application Development folder to certain users or groups of users. 3.0 AUTHORIZED PROGRAM ANALYSIS REPORT (APAR) ABSTRACTS -------------------------------------------------------- This a list of APAR fixes included in this service pack. Each service pack is cumulative; the current service pack includes all the fixes from the prior service pack levels. The APAR abstracts are listed by installable component within a service pack level. --------------------------------- Service Pack Level = SI37891 Build date = April 2010 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE42135: CA400EXP-CONNECTIONS-INCORROUT CWBCFG MAY FAIL FOR DOMAIN USERS The CWBCFG connection creation utility will not process all users under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList when one such is encountered with a missing registry entry, such as ProfileImagePath. RESOLUTION: As of 6.1 SP6, CWBCFG will skip any user for which it cannot load the registry hive and continue to process the rest of the users. CIRCUMVENTION: A valid ProfileImagePath can be added to each profile under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList, allowing CWBCFG to run successfully. APAR SE41142: CA400EXP-SECURITY-UNPRED ATTEMPTS TO CONNECT TO A MACHINE USING KERBEROS AUTHENTICATION FAILS. Attempts to connect to a machine using kerberos authentication fails, sometimes resulting in a CWBSY1012 or CWBSY1013 message. APAR SE42451: CA400EXP-LICMGMT-MSGCWB099 RC052 274D with mobility client On a laptop with a corporate mobility client installed, IBM iSeries Access connections fail with message CWB0999 RC9052 274D when trying to verify that the proper license exists. RESOLUTION: The problem is a bug in the mobility client software, and only occurs when IPv6 connections are attempted. This fix introduces a workaround by enabling the customer to disable IPv6 (on some communication flows) by setting the environment variable CWB_IPC_NOIPV6SOCK to 'Y'. This is best done by altering the PC's system variables and rebooting. OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- APAR SE40093: CA400EXP-OPNAV-OUTPUT-INCORROUT REORDER LIST OF OUTPUT QUEUES BY NAME; DISPLAYING OUTPUT QUEUE DISPLAYS WRONG QUEUE 1. Under My Connections, expand the system 2. Expand Work Management 3. Expand Output Queues 4. Click Output Queues 5. . Resort by Output Queue name 6. Right click on output queue and click Open. 7. A window then appears (note "correct" output queue name in top bar, but incorrect spooled files). RESOLUTION: System i Navigator V6R1M0 service pack 6 will contain this fix. The correct output queue will be opened(both correct output queue name and correct spooled files). APAR SE41594: CA400EXP-OPNAV-MESSAGES-UNPRED INAV CRASH WHEN PERFORMING SOME OPERATIONS System i Navigator sometimes crash when performing some operations. RESOLUTION: System i Navigator V6R1 service pack 6 will contain the fix. No behavior changes for customer. APAR SE39496: CA400EXP-OPNAV-OTHER-INCORROUT iNav shows Geo mirroring properties mode asynch instead of synch APAR SE41452: OSP-INCORROUT DISK MANAGEMENT TASKS WINDOW DOES NOT APPEAR WHEN USING ISERIES NAVIGATOR After failing to take the option to use the Taskpad view under iSeries Navigator, the user is unable to get the Disk Management Tasks window to appear. APAR SE42211: CA400EXP-OPNAV-OUTPUT-INCORROUT-DISK-D/T433C GRAPHICAL REPRESENTATION OF 8203-E4A DOES NOT SHOW UP ON INAV. Graphical Representation of 8203-E4A and 5886 Expansion unit does not show up on iNAV. APAR SE40474: CA400EXP-OPNAV-FILESYS-INCORROUT NAVIGATOR CHANGE DATE/TIME COLUMN LISTING FILES IN A FOLDER IS INCORRECT. System i Navigator Change Date/Time column when listing the files in a folder is incorrect. Right clicking on the file and selecting Properties will show the correct Change Date/Time. APAR SE38864: CA400EXP-OPNAV-NETWORK-INCORROUT SMTP GUI PROPERTIES BINDINGS TAB FAILS TO ADD THE IP ADDRESSES TO BIND TO. SMTP properties in iSeries Navigator doesn't allow the IP Interface Bindings to occur in the Bindings tab. APAR SE39424: OSP-BASEDIR-INCORROUT SYSTEM REGISTRATION WIZARD DOES NOT COMPLETE From iSeries Navigator select the system connection select Configuration and Service, right-click and start the System Registration wizard the Wizard processes correctly but neither the "Finish" button nor the "Save to file" button work. APAR SE39567: CA400EXP-OPNAV-NETWORK-INCORROUT DHCP COMMENTED OUT BY MISTAKE iNav DHCP GUI causes configuration information to be commented out by mistake when running with jar files from 9/29. APAR SE40119: CA400EXP-OPNAV ADDING VIEW Adding a new View the zones are not included in the new View. APAR SE40437: CA400EXP-OPNAV-NETWORK-INCORROUT R610 GUI DOES NOT ADD IP FILTER RULES TO PPP PROFILE When using the R610 OPNAV to create a receiver connection profile, and specify a "PPP filter identifier", it is not passed as a parameter to the QTOCPPPU SPI to create the profile. APAR SE40536: CA400EXP-OPNAV-NETWORK-INCORROUT PPP PPP connection issue, using a Receiver connection profile. If "Based on remote system's user ID" is selected for "IP address assignment method", a remote system is not able to connect to the system. If "Fixed IP address" is selected, it works. This worked at V5R4, but does not work at V6R1. APAR SE40564: CA400EXP-OPNAV-NETWORK-INCORROUT DDM TCP APPLICATION SERVER PROPERTIES DISPLAYED VIA ISERIES NAVIGATOR SHOW INCORRECT VALUE. DDM TCP Application Server properties displayed via iSeries Navigator (right click on Network -> Servers -> TCP -> DDM and selecting properties) shows the value set to password required after changing the PWDRQD parameter via CHGDDMTCPA to any value including *NO for password not required. APAR SE40997: CA400EXP SAVING DNS CONFIGURATION CHANGE ISSUES MESSAGE DNS Configuration, right click Forward Lookup Zones, run Wizard to add a New Zone, after clicking Finish, Save Configuration Change issues CPFA0A9 popup and in QZSRCSRVS joblog. APAR SE41003: TCPIP-SMTP-INCORROUT WHEN LOOKING AT THE "BINDINGS" TAB UNDER SMTP PROPERTIES, BINDINGS TO OLD IP ADDRESSES ARE NOT SHOWN, After a IP address change, SMTP nolonger works, bindings are verified in SMTP properties to ensure SMTP is not bound to the old IP. The bindings tab indicates instead that "Use all interfaces is selected" This may be incorrect. As bindings to IP addresses not currently active on the system aren't shown. APAR SE41361: CA400EXP-OPNAV-NETWORK-INCORROUT REMOTE ACCESS When trying to create a receiver connection profile, with a new line and selecting "Synchronous", the new line is not created. APAR SE41537: CA400EXP-OPNAV-OTHER-INCORROUT ONDEMAND SERVER IS NOT IN THE V6R1 SYSTEM I NAVIGATOR NETWORK -> SERVERS -> TCP/IP CONTAINER. OnDemand Server is not in the V6R1 System i Navigator Network -> Servers -> TCP/IP container. APAR SE41595: CA400EXP-OPNAV-NETWORK-INCORROUT TOO MUCH AUTHORITY REQUIRED TO START AND END REMOTE ACCESS PROFILES When attempting to start or end remote access profiles using System i Navigator at V6R1 you will get the following error if you do not have *IOSYSCFG special authority: "You must have System Configuration (*IOSYSCFG) special authority to access this function." At prior releases of System i Navigator, you are not required to have this special authority to start and stop remote access profiles. APAR SE41328: CA400EXP-OPNAV-MESSAGES-INCORROUT TIME STAMP IN SENT COLUMN ON MESSAGES ISN'T THERE WHEN REGION IS HEBREW. Time Stamp in Sent column on Messages isn't there when region is hebrew. APAR SE39426: CA400EXP-OPNAV-OTHER-INCORROUT SYSTEM REGISTRATION WIZARD DOES NOT COMPLETE From iSeries Navigator select the system connection select Configuration and Service, right-click and start the System Registration wizard the Wizard processes correctly but neither the "Finish" button nor the "Save to file" button work. RESOLUTION: The problem will be fixed in iSeries Navigator V6R1M0 Service Pack 6. The registration information will be saved in either host or local PC. APAR SE40903: CA400EXP-OPNAV-FILESYS MSGCPFA0A9 WHEN EDITING PERMISSIONS Trying to edit Permissions for DBCS named folder results in msgCPFA0A9. APAR SE41289: MSGGUIEIMERROR-CRT-D/TINAVIGATOR-HLIC-94XXMISC GUI ERROR POPUP INDICATING ENTERPRISE IDENTITY MAPPING ERROR Using System i Navigator to manage EIM on multiple systems. EIM on the first system accessed works fine however attempts to do the same on other systems fails with the GUI popup "Enterprise Identity Mapping error". Access to EIM on systems other than the one first accessed is possible by closing and restarting System i Navigator. Again however, only the first system's EIM will ba accessible. APAR SE39402: CA400EXP-OPNAV-FILESYS-INCORROUT SYSTEM I NAVIGATOR - NETSERVER WINDOW DOESN'T SHOW LIST OF SHARES CORRECTLY. R610 System i Navigator when opening System i Netserver window you can select Shared Objects. The list of shares presented in the right side pane of the window is incorrect. The first alphabetical share is not present in the list. Opening the properties of any of the shares that are listed will show the properties of the next share in the list. Expanding the list of shares in the left side panel does show the list of shares correctly and corresponding properties. Alternatively, in System i Navigator under File Systems you can select file shares and the right panel in that window will show the correct list of shares and corresponding properties. APAR SE42416: LIC-DISK-OTHER-INCORROUT INAV OPTION FOR GEO MIRROR DETACH WITH TRACKING MISSING iNav option for Geo Mirror detach with tracking missing when the HA LPP is not installed. RESOLUTION: This PTF only includes the GUI fix for the reported problem. You must also apply the following PTF on your IBM i. MF49517 v6r1m0f DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE41961: CA400EXP-DTRANSFER - Excel addin doesn't support FDF with MS XML file type listed When using the Excel addin for Data Transfer to upload a MS Excel XML file with a previous created FDF with the file type specifies as 22. The upload to replace/append data file will fail with unsupported FDF file message (CWBTF0083). APAR SE39872: CA400EXP-DTRANSFER-INCORROUT MSGCWBDB0048 RFROMPCB A batch data transfer is transferring more than one file to the iSeries using the RFROMPCB program. It uses the /C option to continue with the next transfer regardless of errors or warnings on the previous transfer. This transfer is reporting a CWBDB0048 without any message text. This message should always include iSeries error message text. The same transfer process works without any problems in the V5R1 environment. In the V5R4 environment, the transfer works without any errors or problems when run interactively or if it is run as a single transfer in batch. Tracing revealed that the batch transfer was attempting to set server attributes between the transfers. Those attributes were not attributes which can be changed as a result, the database host server returned an error code to indicate that the attributes were not changed. There was no need to modify the attributes. RESOLUTION: This was a problem where the connection was being reconfigured and there was complications while applying connection attributes to an active connection. The problem has been resolved so that the active connection will not be forced to reconfigure. APAR SE42430: CA400EXP-DTRANSFER-INCORROUT BROWSE NOT RETURNING LIBRARIES When using cwbtfr.ini file option useDelimitedNames=0 to remove delimiters from output in Data Transfer function, the Browse button may not work correctly to return user library list. RESOLUTION: The option will allow a user to retrieve the library list. DATA TRANSFER EXCEL ADD-IN -------------------------- No fixes. ODBC ---- APAR SE40400: CA400EXP-ODBC-INCORROUT ERROR MESSAGES RETURNED TO ODBC WITH INCORRECT CONVERSION OF NATIONAL LANGUAGES When using the iSeries Access for Linux ODBC driver on a client using a national language other than English, error message text is returned to the client ODBC layer with incorrect conversion. For example, the following might be seen in an SQL.log trace: [unixODBC][IBM][iSeries Access ODBC Driver][DB2 UDB]SQL0104 - Token . ung}ltig. G}ltige This is caused by the ODBC driver not increasing the message buffer length when converting from source to target code pages. RESOLUTION: Messages will now be returned properly to the client application. APAR SE41622: CA400EXP-ODBC-INCORROUT COMMA AS DECIMAL SEPARATOR When the option in the data source to use the comma as the decimal separator character, the output of decimal data is inconsistent depending on how the application retrieves the data. An application using the SQLGetData to return decimal data to a character variable, in other words, it is not binding the result columns to a variable, will get a period as the decimal separator regardless of the data source or Windows regional settings. RESOLUTION: Strings containing character representation of a packed or zoned decimal field will now contain the comma as a decimal separator provided the user has done the following : - set their decimal separator in their data source set to comma. - sets the DEBUG keyword to a value of x'20000', 131072, or some combination containing those numbers such that the 18th bit in the value ('100000000000000000'b) is set. OLE DB PROVIDER --------------- APAR SE41276: CA400EXP-OLEDB-MSGSQL0199 ON UPDATE OF RECORDSET IBM iSeries Access for Windows OLEDB provider will generate an incorrect update statement in cases where the update statement provided by the application has embedded carriage returns and line line feeds as the only delimiter between tokens. The invalid update statement will usually cause an SQL0199 error message because a token is out of place. An example which would fail would be an application using a select statement such as, "SELECT * FROM MYTABLE WHERE COL1=? AND COL2=?" There are no spaces after "MYTABLE" or before "WHERE" in this example, the only characters between those tokens are a carriage return and a line feed. The update statement that is generated to update the recordset returned by the statement above would be, "UPDATE MYCATALOG.MYSCHEMA.MYTABLE WHERE SET COL1=? WHERE COL1=? AND COL2=?" You can see that the name of the table, the carriage return, line feed and the next word have all been treated as one token by the OLEDB provider. This error started occurring in V5R4 after applying the service pack which corrected the problems fixed in APAR SE30788. Older versions of the product do not have this problem. To avoid this problem, an application simply has to have a space before or after the carriage return and line feed characters or remove the carriage return and line feed characters altogether. .NET DATA PROVIDER ------------------ APAR SE40142: CA400EXP-IDB2DATA-INCORROUT .NET - ACCESSVIOLATION EXCEPTION The System i Access for Windows .NET data provider (IBM.Data.DB2.iSeries) throws error: : iDB2DataReader.GetDcRow (block, row): 2,3 : iDB2DCFunctionErrorException(48472089).Void .ctor(System.Exception, System.String) : iDB2DCFunctionErrorException - Unexpected Exception. Type: System.AccessViolationException, Message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Details: Exception calling CwbDc.GetRows from iDB2DataReader.GetDcRow. block,row: 2,3 Occurrence of the exception is dependent on how the iSeries DB host server returns rows of data. The error only occurs if the DB host server returns 1 row of data for a Fetch request followed by multiple rows of data for subsequent Fetch requests of the same results set. APAR SE42378: CA400EXP-IDB2DATA RDONLY XA TRANSACTIONS CAUSE NEXT TO FAIL If an application using XA transactions prepares the transaction branch, and receives the XA_READONLY (transaction is read only, automatically committed) return code, the CWBDC component does not recognize the transaction has been completed. Any attempt to start another distributed transaction on the same connection will result in an error indicating a transaction is already in progress. This error message has been reported with the .NET provider: Message : An error occurred while processing a distributed transaction. MessageDetails : Distributed transaction is already started. APAR SE38978: CA400EXP-IDB2DATA Visual Studio TableAdapter fails to generate commands Visual Studio TableAdapter does not always generate Insert / Update / Delete statements when it should. APAR SE41598: CA400EXP-IDB2DATA-INCORROUT Implement Command.Cancel The iDB2Command.Cancel method is a no-op and does not actually cancel a long-running command. While this behavior is documented, adding support for the Cancel method would be very helpful. RESOLUTION: This PTF adds support for an implementation of iDB2Command.Cancel. Because a long-running command ties up the thread that executes the command, an application must call the Cancel method on a separate thread from the thread executing the long-running command. When a command is canceled, any active iDB2DataReader object associated with that command will no longer return data from a Read() request. APAR SE40192: CA400EXP-IDB2DATA-INCORROUT DECIMAL MISSING TRAILING ZEROS Reading from a 4,2 decimal field (e.g. 1.50) via .net provider will result in a number without the zero at the end. (e.g 1.5) LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.7 with support for JDBC 3.0. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20100203 APAR SE38984: CA400EXP-TERMEMUL-INCORROUT CURSOR COLOR INCONSISTENT WITH THE INPUT FIELD COLOR When in PC5250 and cursor in Block mode, or underline with insert, the cursor should match the color of the input field when the cursor is in that input field. When using PC5250 Host Code Page 1399, the cursor is not changing color to match the input field. APAR SE39282: CA400EXP-PRINTEMUL-INCORROUT VARIOUS ERRORS WITH THE ESC_P.PDT TRANSFORM OF DBCS PC5250 PRINTER EMULATION Various problems have been found with the use of the esc_p.pdt transform of DBCS PC5250 printer emulation. Some fields are not presented in the correct position, and sometimes the wrong amount of paper is ejected on a page boundary. APAR SE39683: CA400EXP-PRINTEMUL INCORRECT OUTPUT PRINTING THAI CHARACTERS USING PC5250 PRINTER EMULATION A PC5250 printer session is created to print Thai characters. The non-base character position is a little bit shifted to the right from base character position. APAR SE39771: CA400EXP-TERMEMUL-UNPRED STRPCCMD CAN'T INDENTIFY DBCS WITH HCP1399/1390 In case that Host code page is 1399 or 1390,STRPCCMD can't identify Unicode. For example, customer runs "STRPCCMD PCCMD('notepad.exe AA.txt')" Then the pop-up window 'The file B0.txt cannot be found' appears. 'AA' is DBCS 'A' APAR SE40136: CA400EXP-TERMEMUL-INCORROUT .NET APPLICATION USING HACL CAUSES BSOD Using a .net application with the PC5250 HACL objects fails after 5 - 10 minutes of opening sessions with a BSOD (blue screen of death) on the PC. It takes a PC reboot to recover. The problem appears to happen when IsChildSameThread() returns true at the first iteration of the loop if another message-only window exists in the thread. APAR SE40530: CA400EXP-TERMEMUL-INCORROUT RESTORE EMULATOR WINDOW IN LAST POSITION ON MULTI-MONITOR The pcswin.ini file which contains the locations of iSeries Access Emulator windows becomes corrupt on occasion which causes an emulator session to NOT be displayed when opened. Issue is prevalent in V5R4M0 SI32972 but has been seen on other release. PC5250 should change the Emulator program to check if the values for the window location are reasonable when opening the window and then open the window in a known GOOD location if the value is invalid. This problem seems to occur more often with multi-monitor workstations. The problem also occurs when using remote desktop into system at work from home (single monitor system) and the emulator was last closed on the non-viewable monitor. Other windows programs automatically adjust for this situation and automatically move open windows but not the emulator. APAR SE40544: CA400EXP-TERMEMUL-WAIT FUNCTION KEYS RANDOMLY BECOME UNRESPONSIVE RESULTING IN FORCED ABEND OF PC5250 SESSION. Function keys randomly become unresponsive resulting in forced abend of PC5250 session. APAR SE40650: CA400EXP-TERMEMUL-INCORROUT V5R4 OF ISERIES ACCESS FOR WINDOWS WILL NOT DISPLAY 132 CHARACTERS WHEN USING TERMINAL FONT. Following migration from V5R3 to V5R4 of iSeries Access for Windows, the display session will not display 132 characters when using Terminal Font. APAR SE40754: CA400EXP-TERMEMUL-INCORROUT PC5250 DISPLAY EMULATOR TRIM RECTANGLE IS CLEARED INCORRECTLY When the user presses an AID key, the trim rectangle is removed. This disables the user from moving to multiple screens in between paste operations keeping an already drawn trim rectangle. RESOLUTION: The trim rectangle will remain even after encountering an AID key. This APAR also fixes an issue wherein the trim rectangle was remaining after Paste operation even if the option 'Trim rectangle remains after edit operations' was not enabled. By the fix the Trim rectangle will be removed during Paste operation unless the above option is enabled and hence will be conformant to Cut/Copy operations. SECURE SOCKETS LAYER (SSL) -------------------------- No fixes. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ APAR SE39569: CA400EXP-OPCON-INCORROUT IPADDR BLANKS CAUSE CONNECT FAILURE If certain characters such as leading or trailing blanks are placed in the IP address field, Operations Console may not successfully connect. RESOLUTION: Characters such as leading and trailing blanks are now removed from the IP address string allowing the connection to proceed. CIRCUMVENTION: Re-enter the IP address information, ensuring there are no blanks in the field. PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI35607 Build date = December 2009 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE38898: CA400EXP-CUSTCONTROLS-THREADS-INCORROUT SCAN FREQUENCY ON ADMINISTARTION SYSTEM IS 200MILION DAYS INSTEAD OF EVERY SIGNON Scan frequency on the Administration system is set to "Every Sign On" but the parameter will switch to 200 million days after a scan is done. CIRCUMVENTION: Remove any existing centralAdmin.jreg file from the Common Writable Path prior to requesting a scan. On an English Windows XP PC this file may be found at C:\Documents and Settings\All Users\Documents\IBM\Client Access. The location may vary by language and Windows operating System. APAR SE37687: CA400EXP-APIS-OTHER-INCORROUT "COULD NOT LOAD FILE OR ASSEMBLY"WHEN TRYING TO LOAD ISERIES ACCESS HACL PC5250 APIS. "Could not load file or assembly 'Interop.AutSessTypeLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4165431dd907d942' or one of its dependencies. Strong name validation failed.(Exception from HRESULT: 0x8013141A)." The above message is received when attempting to load any of the iSeries Access Host Access Class Library (HACL) PC5250 Automation Objects. The message will occur whether the "Copy Local" property is set to "true" and the Primary Interop Assembly (PIA) is located in the same directory as the application or the PIA is loaded into the Global Assembly Cache (GAC). The HACL Automation Objects include the following: Interop.AutConnListTypeLibrary.dll Interop.AutConnMgrTypeLibrary.dll Interop.AutOIATypeLibrary.dll Interop.AutPSTypeLibrary.dll Interop.AutScreenDescTypeLibrary.dll Interop.AutScreenRecoTypeLibrary.dll Interop.AutSessTypeLibrary.dll Interop.AutSettingsTypeLibrary.dll Interop.AutSystemTypeLibrary.dll Interop.AutWinMetricsTypeLibrary.dll Interop.AutXferTypeLibrary.dll RESOLUTION: This problem is the result of incorrect processing of the HACL automation objects during build of the IBM iSeries Access for Windows client. The outcome is that customer applications are unable to dynamically load these DLLs in their applications. We have corrected this processing and customer applications will be able to dynamically link to these libraries once this service pack has been applied to clients. APAR SE37569: CA400EXP-SECURITY-WAIT signon may hang A connect attempt to a system which has installed a signon exit program which generates "immediate" or "impromptu" messages may hang. After entering correct credentials the user may be presented with a grey dialog box with a swirling "e" that does not go away and the signon does not complete. RESOLUTION: The client code now correctly processes "immediate" or "impromptu" messages generated during signon. CIRCUMVENTION: Disable the signon exit program. APAR SE37732: CA400EXP-INSTALL-UNPRED CHECK VERSION FAILS WITH ERROR 1309 When running Check Version against an Administrative Image and the client is configured to copy the files to the PC first, the operation fails with "Error 1309- Error reading from file". RESOLUTION: The check service level function of Access for Windows will be modified to correctly ensure the entire administrative image is copied to the local %TEMP% location. Presently, when the service level source location is an administrative image, this function does not copy the sub-directories of the admin image and results in the 1309 error. APAR SE37840: CA400EXP-INSTALL-UNPRED SYSTEM I ACCESS INSTALLS HELP FILES TO THE ROOT OF THE PRIMARY DRIVE. Installation of System i Acess for Windows results in the Help Files being installed directly to the root of the primary drive. RESOLUTION: The root cause of this issue was an environment setting on the customer machine. There is a way for customers to set some pre-condition exit processing for cmd.exe via the Windows registry, which in this case was forcing the current directory to C:\ prior to extraction of the eclipse help files. OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- APAR SE39134: CA400EXP-OPNAV TABLE AND VIEW DEFINITION MISSING COLUMNS When viewing the definition of a table or view in System i Navigator, the list of columns may not contain all the columns in the table or view. RESOLUTION: The definition of a table or view in System i Navigator will now show all the columns in the table or view. APAR SE38013: CA400EXP-OPNAV-OUTPUT-WAIT INAV HANG WHEN PERFORM BASIC OPERATION For some instances,iNav will hang if you open basic operations before any other function. APAR SE38524: CA400EXP-OPNAV-OTHER-WAIT ISERIES NAVIGATOR HANGS WHEN USER ATTEMPTS TO OPEN IT. For some instances, iNavigator will hang during start. APAR SE37774: OSP-PAR-940XCOM CA400EXP-OPNAV ADD CONNECTION BUTTON NOT USABLE When IBM System i Navigator is run with some languages the Add connections button may be disabled. This has been observed with French. RESOLUTION: The "Add connections" button now defaults to enabled. APAR SE29526: CA400EXP-OPNAV-INCORROUT DRAG AND DROP COPY AND PASTE 64BIT The drag and drop or the copy and paste of an i5 spoolfile or file, via iSeries Navigator to a Windows 64-bit OS desktop, will result in a ~drgdrp.tmp file. No *.TXT with the requested data will be created. This will only fail on a Windows 64-bit system. RESOLUTION: The drag and drop handler, cwbunddh.dll, is not loaded on the 64 bits machine, because the 64 bit shell (explorer.exe) cannot load our 32 bit handler (cwbunddh.dll). This problem will be fixed on the next release of iSeries Access. CIRCUMVENTION: 1. Start the 32 bit version of the Windows explorer: Click Start, click Run, type the following in the Open box, and then click OK: Drive_Letter:\windows\syswow64\explorer.exe /separate On Vista, Click Start and type the above command on the Search entry. If logged on a windows terminal server, be sure you navigate on the Explorer until you got to your user desktop directory: Drive_Letter:\Documents and Settings\user1\Desktop 2. From the 32 bit explorer, create a shortcut to the iSeries Navigator: From the File menu, select New and then Shortcut, the Create Shortcut wizard is displayed, click on Browse and look for the cwbunnav.exe program, it is on "Drive_Letter:\Program Files (x86)\IBM\Client Access\cwbunnav.exe", select it, click on Next, and click on Finish. note: on Vista you may need to click on Alt key from the Explorer to show the File menu bar. 3. From the 32 bit explorer, create a shortcut to the Desktop: From the File menu, select New and then Shortcut, the Create Shortcut wizard is displayed, click on Browse... select Desktop and click OK, click on Next, click Finish. 4. From the 32 bit explorer, start the iSeries Navigator, then open your Printer Output, select the spool file you want to copy and paste it into the Desktop shortcut, the spool will be copied to your desktop. You can also drag and drop the spool file. You can use this procedure to copy/paste and drag/drop files from the IFS to the desktop. APAR SE37751: CA400EXP-DBASE-SYNTAX AND RUNTIME ERROR ADD CR TO SQL SCRIPT When running an SQL statement in Run SQL Scripts and the SQL statement has an error, an additional CR (x'OD') may be pre-pended to a LF (x'OA) making it CR LF (x'OD OA'). Then the SQL statement is modified in the Run SQL Script Window with the extra character, and the title bar may show an '*" at the end indicating the script has changed. ADDITIONAL KEYWORDS: OPNAV RESOLUTION: When running an SQL statement and an error occurs, the statement will no longer be modified. APAR SE38769: CA400EXP POUND SYMBOL NOT ALLOWED FOR DATABASE OBJECTS ADDITIONAL KEYWORDS: OPNAV-DBASE-INCORROUT Several functions in database plug-in for System i Navigator will fail with the error message 'Unknown error has occurred.' They include trying to access the JDBC settings in Run SQL Scripts, using the File/Open or File/Save or File/Save As option in the Run SQL Scripts menu. System i Navigator database functions were failing to handle some schema names that contained variant characters that the SQL Reference recommends against using. The schema names all had a British pound sterling symbol in them, which is one of the characters that the # converts to (and the reason that the character should be avoided in schema, table and column names). The character should not be flagged as an invalid character though as was happening here. RESOLUTION: The System i Navigator - Database plug-in will allow the British pound sterling symbol to be used in database object names. APAR SE38771: CA400EXP RUN SQL SCRIPTS, VISUAL EXPLAIN DO NOT ALWAYS SHOW ADDITIONAL KEYWORDS: OPNAV-DBASE-UNPRED When starting System i Navigator's Run SQL Scripts or Visual Explain functions, the window may not always display. It may take mutiple tries to get the window to display. APAR SE39196: CA400EXP-OPNAV-DBASE-INCORROUT SQL PACKAGE DETAILS NOT SHOWN Recent fixes allow for the use of SQL packages with different versions. This causes the system to create the objects with long system names that are different than the short package name. For example the application and SQL package might be named DRDAAPP1 but the first version package will be named DRDAA00001. When one of these packages is displayed in System i Navigator, the properties of the package are not displayed. When you right-click the package and select properties, a window opens with tabs for the detailed information but the window has no data in it. RESOLUTION: When you right-click on a package that has a version and select the Properties menu option, the properties window will display the properties information. APAR SE38167: UNPRED-HLIC-94XXCOM WHEN TRYING TO START ALL NFS SERVERS IN INAV DOES NOT START ALL THE SERVERS. He is running V6R1 iNav, with SP3 (SI32504). When trying to start all NFS servers in iNav, all of them start, except GSS (Generic Security Service) server. STRNFSSVR *ALL works fine from the green screen. APAR SE39446: CA400EXP-OPNAV-NETWORK-INCORROUT ITEMS IN DNS SERVER CONFIGURATION DISPLAY INCORRECT While using iNav/L1C to manage DNS servers via "Network->Servers->DNS". For the dns servers that have a big mount of primary zones(for example, more than 500 primary zones), not all primary zones can be shown at the left panel of DNS Server configuration interface. APAR SE39447: CA400EXP-APIS-COMM-INCORROUT DOMAIN SEARCH LIST IS CHANGED TO *DFT WHEN CHANGING TCPIP SERVER START PROPERTIES. The Domain search list is changed back to *dft when there are two or more entries in the list. This occurs when the Start when TCPIP is started option is changed for a TCPIP server when going in through: Network -> Right click on Configuration ->properties->Servers To Start APAR SE39448: INCORROUT IN DHCP PANELS 1.Subnet Range not working within valid subnet 2.Defined clients get INVALID_STATEMENT text when excluding an ip address. 3.Subnet description is being changed in DHCP configuation panel. APAR SE39449: CA400EXP-OPNAV-NETWORK-INCORROUT IPV4 WAN INTERFACE WIZARD SHOW FRAM DELAY CARD INCORRECT 2793 card is installed in IBM i which is also listed as supporting Frame Relay. However, when we run the new IPv4 WAN Inteface Wizard from the GUI, it does not list any resources as capable of supporting Frame Relay. APAR SE39450: CA400EXP-OPNAV-NETWORK-INCORROUT ANSWER PROFILE ApplicationDefined DATA NOT SET AS DESIGN After create a answer profile and creat a dial profile to use the answer profile created before,we will find in the qusrsys.qatocrte table(run "select * from qusrsys.qatocrte" SQL from DB in iNav), we missed two data(one is APPDFN,the other is RESERVED). APAR SE36875: CA400EXP RAS GUI does not check QRETSVRSEC system value Go to Network, Remote Access Services, Originator Connection Profiles list. Profile does not check the QRETSVRSEC system value while adding Authentication information on dial-on-demand (remote peer enabled) PPP configurations. Additional problems with the user list refresh in the TCP/IP Settings tab. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36984: CA400EXP RAS GUI unable to create a PPP line with sync mode Go to Network, Remote Access Services, Originator Connection Profile list. Create or open a Switched Dial Profile. Go to Connection tab. When creating a PPP line and setting the framing to SYNC the line fails to create with CPDB14C,CPD0076 and CPF0001. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37487: TCPIP-OTHER-INCORROUT INCORRECT DISPLAY OF LEASEEXPIREINTERVAL. On an R610, trying to configure via the iNav DHCP properties results in error msg.....Line 3770 in File /qibm/userdata/os400/dhcp/dhcpsd.cfg is in error. After cancel and/or ignore the configuration will be displayed. Line 3770 in File /qibm/userdata/os400/dhcp/dhcpsd.cfg shows leaseExpireInterval 1 day. The corresponding iNav window shows 1 second. You'll see 1second as well if you edit /qibm/userdata/os400/dhcp/dhcpsd.cfg to a leaseExpireInterval of 5 hours. RESOLUTION: The problem only occurs on non-English environment. The PTF fixes this problem. The value of leaseExpireInterval will be shown on GUI correctly. APAR SE38875: CA400EXP-OPNAV-NETWORK-INCORROUT UPDATING REVERSE ENTRY IN ISERIES NAV FAILS WITH NULL ORIGIN ERROR. Updating reverse entry in iseries nav fails with null origin error. When attempting to create a reverse dns record from iSeries Navigator by selecting the properties of an A record. Then choose edit and and check to create a reverse dns record in the zone. It then fails with NULL ORIGIN ERROR. APAR SE38915: CA400EXP-OPNAV DNS CONFIGURATION HANGS AND DEFINE DHCP RANGE TO ASSIGN GETS ERROR The customer reported two problems: (1) Start System i Navigator - Expand a system - Expand Network - Expand Servers - Click on DNS - Right click on a configured DNS and click on Configuration. The "DNS Configuration" will open and message appears "Reading Configuration File.." and hangs. (2) Start System i Navigator - Expand a system - Expand Network - Expand Servers - Click on TCP/IP - right click on DHCP and select Configuration - Right click on Global and select an earlier defined Subnet - Click on Properties - Click on Select Address tab - select "Range to assign" The range is set earlier as: Start Address: 192.168.2.100 End Addres: must be 26 addresses further or less so in this example 192.168.2.126 Lave the default mask 255.255.255.0 When changing the address range , the customer gets an error. Error :The address range used by this subnet conflicts with the address range already defined by another subnet. APAR SE37719: CA400EXP-OPNAV-FILESYS-INCORROUT V6R1 SYSTEM I NAVIGATOR DOES NOT DISPLAY CONTENTS OF SUBDIRECTORY NAMED "ROOT" When using System i Navigator V6R1 to browse a subdirectory in the Integrated File System (IFS), and the NAME of the subdirectory is "Root", the contents of the its parent directory is displayed instead of the contents of the subdirectory. For example: browse to directory /home/root. The contents of the /home directory is displayed instead of the contents of the /home/root directory. APAR SE38390: CA400EXP-OPNAV-OTHER-INCORROUT SOME ISERIES NAVIGATOR DIALOGUE WINDOWS ARE BNK WHEN OPENED. Some iSeries Navigator dialogue windows are blank when opened. A few minutes later,iSeries Navigator crash. RESOLUTION: iSeries Navigator dialogue windows open successfully. APAR SE38659: CA400EXP-OPNAV-OTHER DIRSRV CONFIGURATION OF PASSWORD ENCRYPTION iNavigator, open default ldap instance's properties panel -> Database/Suffixes -> Password encryption. Selecting AES(256 bit) issues error msg : "Donnees incorrectes dans 'Chifrement de mo..." After clicking on OK the "Edit" button is unavailable. APAR SE39442: CA400EXP-OPNAV-OUTPUT EXPORT SPOOLED FILE FUNCTION REPEATS PAGES FOR DBCS CLIENT System i Navigator is used to export a large spooled file to an ASCII text file. The resulting text file contains pages that are repeated. APAR SE38044: OSP-OTHER-INCORROUT SYSTEM I NAVIGATOR HANGS/ABEND VIEWING LARGE JOB LOGS System i Navigator V6R1M0 hangs and/or abends if you trying to display a large job log for an active job using "Work Management" Active Jobs", right click on the job name, choose "Job Log" and press the End key to get to the bottom of the job log. The same problem occurs: -If you scroll fast using the scroll bar -If you display the job log using the "Work Management" "Subsystem" view The problem only occurs if the job log is relatively large. APAR SE38255: CA400EXP-OPNAV-OTHER-INCORROUT DISK STATUS COLUMNS NOT SAVED Changes made to the columns for the Disk Status iNav window are not saved. For example, after adding the Protection Status column to the Disk Status window, it is missing after closing and reopening the window. This happens in both V5R4 and V6R1. APAR SE38835: OSP-OTHER-INCORROUT ACTIVE JOBLOG NOT SHOWN CORRECTLY IN OPSNAV Active joblog not shown correctly in OpsNav APAR SE37030: CA400EXP-OPNAV-INCORROUT UPDATE FIX-GRP STATUS FAILS A "Fail" status appears when doing a comparison for fix groups. Once a compare task has been completed, if only fix groups are selected to be updated (the update must be manually selected), the task will be marked as failed. First ensure that the Target Systems report missing fixes and fix groups. 1. Click the Update option button. 2. Click the Next button until the missing Fixes page is reached 3. Uncheck all selected fixes (not even a single fix must be checked). 4. Click the Next button until the missing Fix Groups page is reached. 5. Check at least one Fix Group to be updated. 6. Click the Next button until the summary page is reached. 7. Click the Finish button. The task will start sending Fix Group and the "Fail" status will appear on the task window, but Fix Groups have been sent to the target systems. RESOLUTION: Code has been changed to correctly update the "Fix Groups Only" task status. DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE37863: CA400EXP-DTRANSFER EXCEL ADD-IN DOWNLOAD CRASHES WHEN SELECTING DATA OPTION DETAILS In multiple versions of Excel using the data add-in, "Transfer Data From System i", to download data from a file with a large number of fields, Excel crashes or hangs when the details button is selected under data options. Specifically: Select the Add-in, create a new transfer request, specify the system name, specify the library/file(member), press the data options button and then press the details button. RESOLUTION: The processing of details button will correctly display the fields of the database table for selection. The fix will properly create the SQL statement to retrieve the field data. APAR SE38141: CA400EXP-DTRANSFER-INCORROUT ACCESS VIOLATION COPYING DATA TO CLIPBOARD The iSeries Access for Windows data transfer is used to transfer data to the display device. The data in the display window is selected and the right-mouse button is clicked to bring up the pop-up menu which offers options to copy the data to the clipboard. When the copy option is selected, the program faults and generates a Dr. Watson log and dump. The information in the log shows that the problem is an access violation (exception number x:c0000005) in cwbtf.exe. RESOLUTION: The access violation has been fixed. The copy of data to the clipboard will work properly. APAR SE38773: CA400EXP-DTRANSFER-INCORROUT EXCEL ADD-IN DOESN'T DETECT DD/MM/YYYY AS A VALID DATE FROM EXCEL. Using the default UK English date format of dd/mm/yyyy in Excel and trying to upload the spreadsheet with the Data Transfer Excel add-in does not scan the column as a date column even if the option to Convert Excel Date and Time is enabled. The column will scan as a numeric. RESOLUTION: The following date formats have been added; dd/mm/yyyy and dd/mm/yy. Some of the standard date formats (ISO, US) were being returned with a post-fix from EXCEL (i.e. ';@' ). The code was updated to compare the formats with and without the post-fix. DATA TRANSFER EXCEL ADD-IN -------------------------- No fixes. ODBC ---- APAR SE37242: CA400EXP-ODBC-MSGSQL0501 ENCOUNTERED WITH ODBC APPLICATION USING R610 SYSTEM I ACCESS ODBC DRIVER. ODBC application using the R610 System i Access ODBC driver encounters a msgSQL0501. Previous versions of the iSeries Access ODBC driver do not encounter this issue. The ODBC driver defaults to have 'Enable pre-fetch of data for queries' at R610 System i Access ODBC driver. Disabling the pre-fetch option allows the operation to work again. RESOLUTION: The SQL0501 message will no longer be seen and applications will work correctly. CIRCUMVENTION: To circumvent this problem, un-check the ' Enable pre-fetch of data for queries' checkbox under the performance tab on the for the corresponding data source, or set the PREFETCH connection string keyword = 0. APAR SE38018: CA400EXP-ODBC-INCORROUT ISERIES NAVIGATOR ENDS WHEN SECURITY EXIT PROGRAM REJECTS REQUEST. System secured by security exit programs, specifically for client DB access on the QZDAxxxxxx jobs. When performing a function in the iSeries Navigator Database container that the user is not authorized to do by the security exit program and is rejected, iSeries Navigator will just end. The Database container uses ODBC to perform most of its functions and ODBC will connect to the QZDAxxxxxx jobs. Example: User is not authorized to create procedures and if that user attempts to create a procedure in iSeries Navigator Database functions will cause iSeries Navigator to end. RESOLUTION: iSeries Navigator will no longer end when an exit program exists that rejects the user's request. APAR SE38597: CA400EXP-ODBC-INCORROUT ISERIES ACCESS ODBC API SQLSETDESCFIELD DOES NOT EXIT WHEN ODBC OLEDB WRAPPER USES A CLIENT-SIDE CURSOR SQLSetDescField API sometimes returns incorrect results when called repeatedly in the application. RESOLUTION: The iSeries Access ODBC driver will now correctly handle SQLSetDescField requests. OLE DB PROVIDER --------------- APAR SE37815: CA400EXP-OLEDB-INCORROUT MSGCWBZZ5028 RC32300 WHEN INSERTING MULTIPLE ROWS. A .NET program using iSeries Access OLE DB provider is building a multi row dataset to insert into an iSeries table. The first row is inserted but the insert of the second row results in a msgCWBZZ5028 RC 32300. APAR SE39116: CA400EXP-OLEDB-UNPRED RUNTIME ERROR WHEN CONNECTION IS LOST When the OLEDB connection to the iSeries is unexpectedly lost, the application may receive a message like the following: CWBC01047 - "The System i server application disconnected the connection." To recover from this type of error, the application would normally close and reopen the connection. However, when the connection is closed, the OLEDB provider fails with a severe runtime error "The application has requested the Runtime to terminate it in an unusual way." This error causes the program to terminate with no recovery possible. The OLEDB provider will be changed so this severe runtime error is avoided. When the application receives the CWBCO1047 (or any other) communication error, it should close the connection and reconnect. When using Visual Basic, the connection object must be set to Nothing, and reinitialized prior to the open, for example: conn.Close Set conn = Nothing Set conn = New ADODB.Connection conn.ConnectionString = myConnString conn.Open If the application has any objects using that connection, they must also be reinialized, for example a command would need to have its ActiveConnection reset; an open recordset would need to be closed and then reinitialized, and a DataGrid depending on that recordset would need to be rebound. .NET DATA PROVIDER ------------------ APAR SE38028: CA400EXP-IDB2DATA-INCORROUT VARCHAR LENGTH REPORTED 2 BYTES TOO LONG The IBM DB2 for i5/OS .Net provider in V6R1 (6.1) is incorrectly reporting the lengths of varchar columns. It is reporting the length of the maximum character data that could be stored in the column plus 2. The older versions of the managed provider reported the maximum length of the character data that could be stored in the column. The OLEDB.Net provider using the System i Access for Windows OLEDB provider also reports the length correctly. LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.3 (2008-08-29). 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20090912 APAR SE38988: CA400EXP-TERMEMUL Deadlock during signon In certain environments, when an incorrect password is entered for a remote connection, a hang may occur. The user sees the signon screen (with animated icon). RESOLUTION: Deadlock condition has been corrected. APAR SE38932: CA400EXP-TERMEMUL PC5250 updates APAR SE39009: CA400EXP-TERMEMUL Printer Association without device naming changes QPADEVxxxx DEVDs When configuring a PC5250 connection, if nothing is entered into the workstation box but a printer is associated, the printer association may cause unpredictable results. RESOLUTION: The 'Printer Association' button is greyed out until the user specifies a device name. This will have no effect on existing connection profiles. APAR SE37369: CA400EXP-PRINTEMUL MSGCPF5261 RC10050228 PRINTING WITH DBCS PC5250 PRINTER EMULATION A DBCS iSeries Access printer emulation session is created. The printer driver is setup to print landscape on A4 size paper. Intermittently, the writer will fail with MSGCPF5261 RC10050228, indicating invalid *SCS data. APAR SE37509: CA400EXP-TERMEMUL-INCORROUT WINDOWS XP SP3 CAUSES PCSCM.EXE ERROR ON PCTLNET.DLL OFFSET 0X00025995 Customer has upgraded PC to Windows XP SP3 and installed latest iSeries Access for Windows R540 Servicepack SI32972. When using no administrator users and starting PC5250 session they receive PCSCM.EXE error on PCTLNET.DLL offset 0x00025995. APAR SE37597: CA400EXP-PRINTEMUL INCORRECT PAPER FEED WHEN USING ESC_P.PDT TABLE WITH PC5250 PRINTER EMULATION The customer creates a spooled file that specifies 64 lines long at 8 Lines Per Inch. When the page feed is processed at the end of the page, the printer ejects the wrong amount of paper. They are using the esc_p.pdt support. APAR SE37679: CA400EXP-TERMEMUL-INCORROUT CPF5140 RESULTS WHILE RUNNING PC5250 QUERIES. When running a query from PC5250, theuser session appears to hang and a CPF5140 message is generated on the iSeries. APAR SE37680: CA400EXP-APIS-OTHER-INCORROUT GETTEXT METHOD OF AUTOECL OBJECT USING HCP1399 RETURNS INCORRECT DATA. When writing a VB ECL application using auto ECL classes, customers request text using GetText Method of autoECL object using HCP1399. The received data is incorrect. APAR SE37735: CA400EXP-PRINTEMUL VIETNAMESE PC5250 PRINTER EMULATION CONCERNS Output truncated when using A4 paper size 2) Alignment not correct. 3) Character overlay when using bold print when using Vietnamese PC5250 printer emulation. APAR SE37951: CA400EXP-TERMEMUL-INCORROUT PC5250 MACRO PLAYBACK OF LARGE MACROS PC5250 has no published size limitation. However, there is issues when trying to play back macros larger than 32k. To judge if the macro is too large to playback successfully, try to load it in the macro editor utility. If the macro is too large, PCSKBD453 is displayed. This message should be displayed at attempted playback time to warn the user. RESOLUTION: The macro size limitation is still in place. However, an appropriate error message will be displayed to the user. APAR SE37978: CA400EXP-TERMEMUL-UNPRED INCONSISTENT PROCESSING OF PASSWORD STARTING WITH A NUMBER Client Access inconsistently handles passwords beginning with an number. When Bypass Signon is turned on in PC5250, error message E0004 is displayed at the bottom of the signon screen because no Q was auto-prepended to the password it received from CA Core programs APAR SE38094: CA400EXP-TERMEMUL VBSCRIPT MACRO WSCRIPT.QUIT() FUNCTIONALITY TO END THE MACRO IS NOT AVAILABLE. There is no way to programmatically end a VBScript emulator macro. Windows Script Host allows a script to exit and end without error anywhere in the code using the WScript.Quit(). Err.Raise does not have a code that will allow the program to end the macro normally with out sending an exception to the user. APAR SE34939: CA400EXP-TERMEMUL-INCORROUT DATA DISAPPEAR IN FIELD THAT SPECIFYBLINKING WHEN HIT UNIQUE KEY FOR APPLICATION The data disappear in field that specified brinking and underline attribute (x/2E), when hit unique key for application, in this case is 'Ctrl + D'. APAR SE36051: CA400EXP-TERMEMUL-INCORROUT THE CLIENT DOES NOT DISPLAY TERMINAL FONT AT THE CORRECT OUTPUT WIDTH. Following migration from V5R3 to V5R3 of the client, the display session will not display 132 characters wide using Terminal Font. APAR SE36727: CA400EXP-TERMEMUL-INCORROUT KEYBOARD MAPPING OPTIONS WILL NOT LOAD. When using Split View the keyboard mapping options will not load. APAR SE36774: CA400EXP-PRINTEMUL-INCORROUT PC5250 PRINT EMULATION MISPOSITIONS SOME CHARACTERS Two incorrect output problems have been identified with PC5250 printer emulation. A pdt file is in use based on KMPCL6.PDT. Both incorrect output situations involve characters that are incorrectly shifted. APAR SE36960: CA400EXP-TERMEMUL-THREADS-UNPRED NO SOUND IN CITRIX ENVIRONMENT. PC5250 emmulation has no sound in a Citrix Enviroment. APAR SE37061: CA400EXP-TERMEMUL-INCORROUT THAI AND VIETNAMESE FIELD NAMES DISPLAY INCORRECTLY. In PC5250, some Thai and Vietnamese field names are not being displayed correctly. APAR SE37109: CA400EXP-PRINTEMUL FORM SETTINGS BLANK WITH PRINTER EMULATION INTERFACE On a PC with Windows Vista, create a printer emulation session. Click File/Page Setup, and then the Forms Settings tab. The settings are blank, and you cannot set them using the Defaults button. On Windows XP, you can recreate the same thing by using Windows Default Printer, save the settings, then close and reopen. APAR SE38139: CA400EXP-TERMEMUL-THREADS-UNPRED STATUS MESSAGE CAUSES CURSOR TO GO TO HOME POSITION. Customer has a message handler program that sends a status message at the bottom of the users program screen. When this alert message comes in it causes the cursor to move to the home position instead of staying where it was at. APAR SE38177: CA400EXP-PRINTEMUL ERROR WHEN PRINTING TO A FILE WITH PC5250 AND VISTA The windows Generic/Text Only printer driver is installed on a PC using Windows Vista Enterprise and uses port FILE:. A PC5250 printer session is setup to use host print transform with QWPDEFAULT workstation customizing object. This session uses the generic printer driver. When you print, shows Error - Printing. APAR SE38189: CA400EXP-TERMEMUL-INCORROUT WHEN USING THE "TAB" KEY ON A VIETNAMESE KEYBOARD, THE LAST CHARACTER ENTERED IS DUPLICATED. When using the "tab" key on a Vietnamese keyboard, the last character entered is duplicated. APAR SE38211: CA400EXP-TERMEMUL-INCORROUT COPY/PASTE ISSUES ITH HCP 930 OR 939. With HCP 939 or 930, if data is pasted to the split field on PC5250 screen, the data will paste only to the top/first field. The remaining data is omitted. APAR SE38227: CA400EXP-TERMEMUL-INCORROUT INSTALL OF SI34289 CAUSES AN ISSUE WITH THE ALARM SOUND. After installing SI34289 the alarm sound does not work when messages are sent. CIRCUMVENTION: ftp://ftp.software.ibm.com/as400/products/clientaccess/win32/v6r1m0/files/pc5250/se38227/ APAR SE38305: CA400EXP-TERMEMUL-INCORROUT PRINTSCREEN DOESN'T SHOW 747 SPECIFIED IN .XLT TABLE IN S-CHINESE ENVIRONMENT The customer uses Simplified-Chinese environment. iAW is R610 SI29455 (PCOMM J5.9 20071102). He would like to show '$' sign instead of 'Yuan'. So he added [Translation] in the .ws profile so that he could use translation table which had '5B=24' in it. (i.e. 5B=Yuan in 1388 and 24=$ in 935) It worked fine for Display but 'Yuan' was printed when he did PrintScreen from the display session. APAR SE38484: CA400EXP-TERMEMUL-INCORROUT AFTER INSTALLING SERVICE PACK SI35287 PC5250 SESSIONS FAIL TO CONNECT WHEN USING NAVIGATOR After installing service pack SI35287, iSeries Access for Windows SSL users, who use the PC5250 default security settings in iSeries Navigator Defaults, and set the Navigator connection to use SSL will find PC5250 sessions will fail to connect. PC5250 is failing to pick up the SSL security setting from iSeries Navigator Properties. APAR SE38551: CA400EXP-PRINTEMUL FONT DOES NOT SHOW UP IN LIST OF FONTS FOR JAPANESE PRINTER EMULATION A DBCS Japanese printer emulation session is created. On release 530, they were able to select the "Modern" font from File/Page Setup, Font of Text tab. When they upgraded to 540 iSeries Access for Windows, that font does not show up in the list anymore APAR SE38661: CA400EXP-TERMEMUL-INCORROUT "YUAN" X'5B EBCDIC APPEARED AS AS "BOX" X'14 ANSI IN NOTEPAD INSTED OF "$" X'24 ANSI When using CCSID 1388 (Simplified Chinese) the "yuan" symbol is translated as "$", using translation table .xlt, when copying into Notepad but the translation back to Yuan does not occur when copying back to PC5250. A box is displayed instead. SECURE SOCKETS LAYER (SSL) -------------------------- APAR SE38865: SSL updates APAR SE38298: CA400EXP-SSL-INCORROUT DOWNLOAD OF SSL CERTIFICATE APPEARS TO FAIL FOR PC5250 USER CONFIGURATIONS Clients installed as PC5250 User display CWBCO1038 "The System i Access SSL option is not configured" message when downloading the SSL Certificate from the IBM i. RESOLUTION: Clients installed as PC5250 User will NOT display CWBCO1038 "The System i Access SSL option is not configured" message when downloading the SSL Certificate from the IBM i. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ No fixes. PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI34289 Build date = February 2009 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE35852: CA400EXP-INSTALL ADMIN IMAGE FAILS FROM NETWORK DRIVE Attempting to update an administrative image with service pack SI32504 fails when the installation image is located on a network drive. The user is presented with the following message: "Could not update readmesp.txt. rc=3" The installation log file contains the following message: 'CopyFile' for 'source: "readmesp.txt", target: "readmesp.txt"' failed with return code '3' RESOLUTION: This PTF fixes the reported problem. CIRCUMVENTION: Copy the administrative installation image as well as the service pack executable to a folder on your local PC, and perform the update process locally. Once the update process has been completed, you can copy the administrative image back to the distribution point in your network. APAR SE36316: CA400EXP-INSTALL ADMIN IMAGE FAILS WHEN USING NON-ENGLISH The problem occurs when the customer combines service pack SI32504 with an administrative image and starts an installation from the combined image, and in the Choose Setup Language dialog selects a language other than English. The following message is displayed: "Fel 2229. Database: Could not load table 'LaunchCondition' in SQL query: SELECT 'Condition', 'Description' FROM 'LaunchCondition'" RESOLUTION: This PTF fixes the reported problem. CIRCUMVENTION: The customer can start the installation and select English in the Choose Setup Language dialog. Although the installation wizard will be presented in English, the customer will be able to select any language as the product's primary language. APAR SE37017: CA400EXP-INSTALL-LOOP Hang when JAVA plug-in file not found When a Java file defined in the setup.ini is not found in the plug-in files, it may cause an infinite loop. OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- APAR SE37020: CA400EXP Inbound Admission Policies list is not loaded This problem is reproducible in the web environment: - Go to Network -> Show All Network Tasks -> Quality of Service -> Change Configuration. - Click on 'Inbound Admission Policies' from the QoS tree. - If policies do not already exist, create at least one. - If policies do already exist, they are not listed correctly in the table on the right panel. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37021: CA400EXP v.25 Bis command string is not saved Go to Network, Remote Access Services, Originator Connection Profile list. Open a switched Originator connection profile. Go to connection, open line properties. (Must be external modem) Select AT dial command type, Enable v25 bis command, Set some string command. Save line and profile. The change in the command string was not saved. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36983: CA400EXP UCW problem with proxy password confirmation Select Network->Remote Access Services->Originator Connection Profiles. Right-click on Configure IBM Universal Connection. Using the Universal Connection Wizard, select "Additionally configure a proxy connection." Configure a user ID and password for the proxy under the Proxy Destination panel. A confirmation panel for the password pops up, and the "OK" button is hidden behind a button that says "confirmPassword.Button3.TEXT". ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37022: CA400EXP-OPNAV UNEXPECTED ERROR EXECUTING AN SQL SCRIPT When running an SQL statement in Run SQL Scripts the user may get an unexpected MSGSQL0104 error message. The error may happen when trying to execute a script which contains a CASE...END CASE clause. This causes the end of the SQL statement to not be handled properly. ADDITIONAL KEYWORDS: DBASE-MSGSQL0104 RESOLUTION: This PTF fixes the reported problem. CIRCUMVENTION: Remove the word 'CASE' from the phrase 'END CASE'. APAR SE37024: CA400EXP-OPNAV-DBASE-INCORROUT COMMAND PROMPTER IN RSS When using the Run SQL Scripts (RSS) window, the user may get incorrect output when prompting a CL command through the Command Prompter. The problem may happen after the user has brought up the Command Prompter dialog in the current RSS session, switched to another system with a different release and then brought up the Command Prompter dialog again. The available parameters would be the same as the first time the user displays the dialog. APAR SE37025: CA400EXP-OPNAV-DBASE-INCORROUT ANALYZE A SUMMARY SQL MONITOR When the user is in the SQL Performance Monitor list, and they try an analyze action over a monitor, they may get an 'An unknown error has occurred.' error dialog. The steps to recreate are as follow: 1. Open the SQL Performance Monitors list 2. Start a Summary monitor 3. End the Summary monitor. Its status is updated (from Started to Ended). 4. Select the 'Analyze...' context menu action of the just created monitor. RESOLUTION: This PTF fixes the reported problem. CIRCUMVENTION: Refresh the list before doing the analyze action. APAR SE37026: CA400EXP-OPNAV DEFAULT IP ADDRESS CREATING AN SQL MONITOR When creating a Detailed SQL Performance Monitor, the Client location field may display an incorrect default value. ADDITIONAL KEYWORDS: DBASE-INCORROUT APAR SE37027: CA400EXP DNS GUI is unable to set IPv6 in dynamic update Go to Network -> Servers -> DNS. Click the Configuration action of an interface. Click New Primary Zone option from the Server\forward lookup zone folder. Set the zone to perform dynamic updates. While trying to add elements to the Address Match List, IPv6 addresses cannot be specified. IPv6 addresses are also not allowed in the allow-update statement via zone properties. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37028: CA400EXP ISP deletes default routes at the end of the wizard Select Network->Internet->Internet Setup Wizard For Company/Office to ISP scenario, the following occurs: - An existing default route is deleted at the end of the Internet Setup Wizard. This affects all existing LAN connections. - Active rules for the profile created fail. - Selecting an existing dialup connection profile from "Choosing a Profile" panel makes the wizard fail. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37029: CA400EXP OSPF interface authentication GUI problems When an interface has its authentication type set to 'Area,' some rare behaviors appear on the GUI. Go through Network -> Servers -> TCP/IP -> OMROUTED -> OSPF -> Properties. Go to the 'Interfaces' tab, select an existing IPv4 interface, and click on the 'Edit' button. Go to the 'Authentication' tab: 1. When 'Area' is selected as 'Authentication type,' the password is always validated as MD5, even if the area is configured with authentication type as password. 2. When editing the interface which has 'Area' as 'Authentication type,' the confirm password value is not stored and the password's fields are not enabled. 3. The Authentication key's valid range is from 1 to 255 when MD5 is selected. 4. Authentication passwords accepts invalid entries. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE35394: CA400EXP-OPNAV-FILESYS OBJECTS SORTS INCORRECTLY File System objects sorts incorrectly in the main list of Integrated File Systems when the user sorts by selecting the Type column. The objects are only sorted by the type but the objects should be sorted by type and then alphabetically by the name. APAR SE35432: CA400EXP Value from SMTP Filter tab not saved Select Network->Servers->TCP/IP. Select SMTP and right-click on Properties. Go to the Filters tab. Select the "Keep message" radio button. The selection is not saved. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE35482: CA400EXP LAST TWO LIBRARIES ARE NOT SHOWN UNDER QSYS.LIB Additional keywords: OPNAV-FILESYS When QSYS.LIB contains more than 200 libraries, the last two libraries are not shown. This error occurs using File Systems in the System i Navigator. APAR SE36007: CA400EXP Error adding static routes in RAS profiles Go to Network, Remote Access Services, Originator Connection Profiles. Select profile, open properties. Unable to define static hosts routes for PPP connections. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36188: CA400EXP RAS GUI is setting a different value internally for pap Go to Network -> Remote Access Services -> Originator Connection Profile list. Create or change an Originator profile. The Remote Access Services GUI is setting a different value internally for PAP. This causes PAP to fail on PPP connections to remote hosts. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36469: CA400EXP-OPNAV-FILESYS DOES NOT SHOW DETAILS BUTTON The "Details..." button, from the "Use" page is not enabled when the file is in use by a job. The "Details..." button is in the "Use" page, that is displayed following these steps: 1. From System i Navigator, click on Integrated File System. 2. Click on Root. 3. Right click on a file that is in use by a job. 4. Select Properties. 5. Click on the "Use" tab. 6. Click on the "Show Usage..." button. APAR SE36552: CA400EXP-OPNAV Warning after dynamic update on DNS GUI Go to Network. Go to Servers. Go to DNS. Select an instance with a dynamic update performed. The DNS Navigator displays a warning triangle icon in the tree for dynamic zones after a dynamic update. ADDITIONAL KEYWORDS: NETWORK-INCORROUT APAR SE36593: CA400EXP-OPNAV-OUTPUT-INCORROUT WRKSPLF COMMAND FAILS Enter the WRKSPLF command from the DOS prompt of a Windows PC. If the host system is version 610, the list of spooled files will either display incorrectly or fail with MSGCWB0012 or MSGCWB0089 Unicode data cannot be converted. APAR SE36608: CA400EXP ENABLE PROXY ARP SAVES THE HOST SUBNET MASK Go to Network-> TCP/IP Configuration-> IPv4-> Interface List. In the Properties of a Virtual Ethernet Interface, Enabling Proxy ARP automatically changes the subnet mask to 32-bit for iSeries servers running V6R1M0. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36617: CA400EXP-OPNAV NETWORK PRINTERS NOT SHOWN AT GRAPH HISTORY The Graph History and System Monitor Print panels do not show the network printers in the list of printers the customer can select from. RESOLUTION: Code has been changed to retrieve all (local and remote) printers in the network connection. APAR SE36633: CA400EXP Problem adding Remote Name Server in DNS GUI Go to Network -> Servers -> DNS. Select the instance and click configuration. Select File -> Properties, then select the Remote Name Server tab. Add a remote name server. At save time, the DNS GUI adds both IPv6 and IPv4 statements. This causes the DNS to fail during startup with a message in joblog like the following: named[4614] - /QIBM/UserData/OS400/DNS/WIGMU/named.conf:1642: server 'x.x.x.x': query-source-v6 not legal. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT RESOLUTION: This PTF fixes the reported problem. The statements that do not correspond to the remote server IP version are ignored. APAR SE36717: CA400EXP VPN IPSEC DATA POLICY DOES NOT SAVE 3DES When configuring IPSEC data policy Tunnel using iSeries Navigator, you can select the 3DES, but it will not be saved. Select 'Network' -> 'IP Policies' -> 'Virtual Private Networking' -> 'IP Security Policies'. Right click on 'Internet Key Exchange Policies' and select the 'New Internet Key Exchange Policy' option. When the properties page appears, complete the configuration for the 'Remote Server' and 'Association' panes, then go to the 'Transform' pane. Click on the 'Add' button. After the 'Internet Key Exchange Policy Transform' dialog is displayed, set '3DES-CBC' as the encryption algorithm. Commit the Internet Key Exchange configuration. In the left pane, right click on 'Data Policies' and select 'New Data Policy'. Enter the configuration in the 'General' pane. Go to the 'Proposal' pane and click on the 'Add' button. When the 'New Data Policy Proposal' property sheet appears, go to the 'Transforms' pane and click on the 'Add' button. After the 'Data Policy Transform' dialog appears, select the 'Protocol' -> 'Encapsulating security payload (ESP)' radio button. Set the encryption algorithm as '3DES-CBC' and commit the transform dialog. The column 'Encryption Algorithm' at the transforms list displays '---' instead of the configured value. Also, after saving the Internet Key Exchange Policy and reopening, the Transform List buttons are grayed out -- even if the first transform is selected. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36749: CA400EXP Changing the TCP/IP configuration properties fail Go to Network-> TCP/IP Configuration-> Properties. When specifying the Domain Name of the system, if hyphens are included in the name, the following message is shown: Expression parameter not allowed for parameter DMNNAME. Error found on CHGTCPDMN command. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE36874: CA400EXP-OPNAV-DBASE IMPORT TO TABLE WITH CCSID 13488 FAILS When using the Data Import wizard in System i Navigator - Database to import data into a target table with a CCSID of 13488, the import will fail. RESOLUTION: This PTF fixes the reported problem. CIRCUMVENTION: This problem can be circumvented by pressing the Show Command button on the last page of the Import wizard. The CL command for the error record file may look like this: /* Creating error record file */ CL:CRTSRCPF FILE(QTEMP/QAUGDBERCD) RCDLEN(959) CCSID(13488); Change the CCSID parameter value in this command to be CCSID(1208) and run the commands from within the Run SQL Scripts window. APAR SE37019: CA400EXP Unsaved parameters and missing panel on QoS wizard Problem 1: 1. Select System i -> Network -> IP Policies -> Quality of Service -> Configuration 2. Open the wizard to create a new Inbound policy or to change the properties of an existing policy 3. On the Codepoint window (or tab in properties), select "Specific codepoint", and select the first codepoint of the list. 4. On the Local IP Address window (or tab in properties), select "IP address" and select the first IP address of the list. 5. Save the changes clicking on Finish button (or OK in properties). 6. Open the created (modified) policy properties. Result: The Codepoint and IP Address were not saved as expected. Problem 2: 1. Go to System i -> Network -> IP Policies -> Quality of Service -> Configuration 2. Open Properties for an outbound diffserv or intserv policy 3. On the 'Local IP Address' window, select "IP Addresss" and select any IP from the dropdown list 4. Click on the OK button to save the policy. 5. Reopen the properties and go to 'Local IP Address' and select 'All IP Addresses' 6. Save the policy by clicking the OK button 7. Reopen the properties and make sure the change was applied. Result: the IP Address is still set to a single IP Address. Problem 3: 1. Go to System i -> Network -> IP Policies -> Quality of Service -> Configuration 2. Open the IntServ wizard 3. On the Application panel, select Protocol TCP 4. On the Performance Limits panel, type a value into 'Maximum number of flows' Result: after the 'Local IP Address' panel, the wizard shows the 'Integrated Services Marking' instead of 'Integrated Services Type'. The value of 'Maximum number of flows' is not saved after the wizard is finished. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37018: CA400EXP Schedule and clients not saved in Diffserv policy In the path: Network -> IP Policies -> Quality of Service -> Configuration, open the Properties for one of the policies. On the Schedule tab, create a new schedule. On the Client tab, create more than two clients. Save the changes by clicking on the OK button. Open the modified policy properties, and as a result, the clients and schedule were not saved as expected. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37016: CA400EXP static routes are not created for new interfaces Go through: Network-> TCP/IP Configuration-> IPv4-> Interfaces-> New LAN Interface. After committing the wizard, the added static routes in the "Routing" panel are not created. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37015: CA400EXP IPv6 stateless interface values are not saved In the path: Network-> TCP/IP Configuration-> IPv6-> Interfaces, right-click on "Properties" for a stateless interface. On the General tab, click on "Properties" and set the "Specify MTU size" and "Use duplicate address detection" settings. The MTU and Duplicate address detection values are not saved. Additional Keywords: OPNAV-NETWORK-INCORROUT APAR SE37014: CA400EXP New DHCP configuration wizard problems Select Network-> Servers-> TCP/IP-> DHCP-> Configuration. - Right Click on "General" and select "New Configuration". If the user chooses to migrate the Bootp server, the following message appears at the end of the wizard: "PCML document source 'com.ibm.as400.opnav.dhcp.Migratebootp' cannot be found". Also, the "Autostart" value of the wizard is not saved. - Right click on "Global" and select the "Properties" action. Under the "other" tab, the "bootstrap" field does not allow any IP addresses to be entered. ADDITIONAL KEYWORDS: OPNAV-NETWORK-INCORROUT APAR SE37437: CA400EXP-OPNAV-DBASE-MSGSQL0338 DISPLAYING INDEXES LIST WITH R610 CHANGES MADE REQUIRING MORE CONSISTANT JOIN DEFINITIONS A MSGSQL0338 ERROR MAY BE GENERATED WHEN USING ISERIES NAVIGATOR TO DISPLAY INDEXES FOR A SCHEMA. DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE35769: CA400EXP-DTRANSFER IASP OF JOB DESCRIPTION IS NOT HONORED This APAR describes the behavior of the iSeries Access for Windows Data Transfer component when using auxiliary storage pools (IASPs). In the V5R3M0 version of iSeries Access, Data Transfer always used the IASP specified in the job description of the user profile. Starting in the V5R4M0 version of iSeries Access for Windows, the IASP in the job description was no longer used; instead, Data Transfer read the IASP setting from the Connection tab of the Data Transfer Properties dialog. If not changed by the user, the IASP defaulted to *SYSBAS. As a result of this change in behavior, the IASP in the user's job description was never used. To remedy this situation and allow the user better control over how the IASP for Data Transfer is specified, the IASP setting for each system can now be set using a new [IASP] cwbtfr.ini option, for example: [IASP] myiSeriesIASP1=IASP1 myiSeriesIASP2=IASP2 ... etc ... The two systems, myiSeriesIASP1 and myiSeriesIASP2 are defined in iSeries Navigator. If the IASP setting is specified in the cwbtfr.ini file, the value is used to initialize the IASP value in the Connection tab of the Data Transfer Properties dialog. The value in the dialog can then be changed if desired. If the IASP setting in the .ini file and in the Properties dialog is not changed from the default value of *SYSBAS, then the user's job description is used. APAR SE36052: CA400EXP-DTRANSFER-INCORROUT POSITION NOT WRITTEN TO TRACE When enabled, Data Transfer option to 'Log position of untranslatable fields' should write an entry to the Detail Trace logging the row and column where the untranslatable character was encountered. V5R4 and V6R1 clients are currently not logging the position to the trace. APAR SE37485: CA400EXP-DTRANSFER-INCORROUT ORDER BY CLAUSE RESULTS SQL0125 When performing a Data Transfer download using a ORDER BY clause the ORDER BY looks correct in the GUI and when viewing the .dtf in Notepad but when executed results in message SQL0125. Data Transfer is not sending the correct string for the ORDER BY in the SQL statement which results in an SQL0125. The exact same string in a GROUP BY works fine. RESOLUTION: Tokens for the ORDER BY clause are now being process correctly into a single token and passed to the IBM i database. DATA TRANSFER EXCEL ADD-IN -------------------------- APAR SE36134: CA400EXP-DTRANSFER ADD-IN CAUSES EXCEL TO CLOSE ABRUPTLY The Data Transfer Add-in causes Excel to crash and close abruptly when an attempt is made to upload data to an existing iSeries file and the selected area in the spreadsheet has more columns than exist in the iSeries file. This happens when using the options "Append to existing member" or "Replace member" and only if the FDF file has not been previously created. APAR SE36808: CA400EXP-DTRANSFER-INCORROUT CWBTF0011 FIELD LENGTH > 1022 Attempting to upload an Excel file in BIFF8 format that contains a field with a length greater than 1022 will fail with a CWBTF0011 message indicating data truncation occurred. This occurs even if the target table column is defined with a size large enough to hold the data. The BIFF8 specification has a column or field limit of 32767 and DB2 for iSeries has a CHAR limit of 32766, so this truncation should not occur. ODBC ---- APAR SE35508: CA400EXP-ODBC-INCORROUT ACCESS VIOLATION IN CWBODBC.DLL A Windows application is using the System i Access for Windows ODBC driver to prepare and execute an SQL statement. The statement is over 600,000 characters long and contains some characters that do not have EBCDIC equivalents. When the conversion is done from unicode to EBCDIC, the untranslatable characters are converted to the standard code point for characters that do not exist in a character set. But the ODBC driver is incorrectly sending a statement to the host server with over 1,800,000 spaces appended to the end of the statement. That makes the statement over the 2 megabyte limitation for SQL statements. When the error is returned to the PC, the ODBC driver fails with a protection fault. APAR SE35669: CA400EXP-ODBC-INCORROUT SQLGETDATA WRONG STRLEN_OR_INDPTR Starting at iSeries Access V5R4 service pack level SI31388, calls to the ODBC API SQLGetData return the incorrect value for *StrLen_or_IndPtr. Instead of returning the length of the buffer remaining in the column, it is returning the length of the target buffer specified on the call to SQLGetData. This issue also exists in the IBM System i Access for Windows v6r1m0 product. The driver will be updated to return the length of the data remaining in the column. The SQLGetData API is documented here: http://msdn.microsoft.com/en-us/library/ms715441(VS.85).aspx APAR SE35964: CA400EXP-ODBC-INCORROUT SQLTRANS ROLLBACK NOT HONORED ODBC application using the iSeries Access for Windows ODBC driver attempts to insert a record into a table. If the insert fails, for example a duplicate key value or invalid length, and the application then executes an SQLTrans rollback, the rollback is not sent to the iSeries so a lock is left on the table potentially causing lock contention on the table until a commit or rollback flows or the job is ended. APAR SE36703: CA400EXP-ODBC-INCORROUT ODBC WRONG NUMBER OF PARAMETERS This error happened after upgrading to iSeries Access V5R4 from Client Access Express V5R1. Using the .NET ODBC wrapper over ODBC drivers encounters the following error message: [IBM][iSeries Access ODBC Driver]Wrong number of parameters. The sequence that causes this error is: Allocate statement Bind parameters This step includes retrieving the statement attribute for SQL_ATTR_APP_PARAM_DESC. All numeric params have their precision, scale, and data pointer set using this method. Repeat 3 times... ExecDirect on an update statement SQLFreeStmt with close option Rebind a single numeric parameter, SQLBindParameter, followed by multiple SQLSetDescField calls for precision, scale, and data pointer. ExecDirect, fails with the wrong number of parameters error. Since the application never dropped the statement, or unbound the parameters, it should be legal to rebind one of the parameters and execute the statement again. RESOLUTION: The SQLSetDescField API needed to be fixed to account for total number of columns, not just the current column passed to the API. OLE DB PROVIDER --------------- APAR SE36806: CA400EXP-OLEDB-INCORROUT NEGATIVE DECIMAL NUMBERS LOSE SIGN Using OLEDB to insert a negative value into a decimal field will sometimes lose the sign. APAR SE37343 : CA400EXP-OLEDB EXCEPTION READING NULL LOB WITH STATIC CURSOR An application may experience an exception when trying to read null LOB data from a result set, when using a static cursor. APAR SE37287 : CA400EXP-OLEDB Data Mapping Error on INSERT using SQL Server A MSGCPF5029 - "Data mapping error on member &4" occurs when executing SQL INSERT or UPDATE statement(s) using the 4-part naming convention (LINKED SERVER.RDB.SCHEMA.TABLE) in SQL Server through the System i Access IBMDA400 and IBMDASQL OLE DB providers. .NET DATA PROVIDER ------------------ APAR SE35276: CA400EXP-IDB2DATA INDEXOUTOFRANGEEXCEPTION READING NULL CHAR An application using the iSeries Access for Windows .NET provider to access data on the iSeries encounters an exception when getting data. The application is using the DataAdapter.Fill method to get data from the iSeries but the data has an embedded null. This results in an exception in the application, 'System.IndexOutOfRangeException'. If the same is done using the iSeries Access OLEDB IBMDASQL provider no exception is encountered. RESOLUTION: The problem happens because the null character causes a translation error. This is the expected behavior. Because some customers would like to avoid this problem and instead receive a substitution character instead of the exception, a new property is added to the .NET provider that can be used to get the desired behavior. This new property should be set in the ConnectionString of the iDB2Connection object. Property: bool AllowUnsupportedChar Description: Gets a value which indicates whether unsupported characters will be allowed during translation, or whether their presence will cause an exception to be thrown during translation of data coming from the host. Default value: false (cause an exception) Example of how to get the new behavior: iDB2Connection cn = new iDB2Connection("DataSource=mysystem; AllowUnsupportedChar=true;"); APAR SE35399: CA400EXP-IDB2DATA-INCORROUT MEMORY LEAK READING CLOB DATA The iSeries Access .Net managed data provider is being used to retrieve records that contain Character Large OBjects (CLOBs). Every time that a data set is retrieved and disposed of, the memory allocated to the application increases. Process Explorer was used to show that the memory is not being allocated by the .Net CLR, it seems to be in the .Net provider itself. Deeper analysis showed that the problem was actually in a lower level component and that this same failure could affect the OLEDB provider. APAR SE37122 : CA400EXP-IDB2DATA EventWaitHandle UnauthorizedAccessException EventWaitHandle constructor throws UnauthorizedAccessException in the System i Access for .NET Managed Provider intermittently. For example: UnauthorizedAccessException: Access to the path is denied. System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) 2057035 System.Threading.EventWaitHandle..ctor(Boolean initialState, EventResetMode mode, String name) +2840139 IBM.Data.DB2.iSeries.iDB2NamedEvent..ctor(String eventName) +127 IBM.Data.DB2.iSeries.iDB2Trace..cctor() +89 - TypeInitializationException: The type initializer for 'IBM.Data.DB2.iSeries.iDB2Trace' threw an exception.! IBM.Data.DB2.iSeries.iDB2Trace.get_Tracing() +12 IBM.Data.DB2.iSeries.iDB2Factory..cctor() +69 LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.3 (2008-08-29) and the equivalent of PTF 5761JC1 SI32768. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20090409 APAR SE37023: CA400EXP-TERMEMUL-INCORROUT CWBLM0111 KERBEROS LARGE TICKET When kerberos Enterprise Identity Management (EIM) / Single Sign On (SSO) is used with a large ticket size the message CWBLM0111 may be produced. This can happen if the user is a member of many groups. APAR SE35063: CA400EXP-TERMEMUL-INCORROUT PC5250 FAILS TO LAUNCH BROWSER When using Windows Server 2003 with iSeries Access for Windows service pack SI29771 installed, attempting to launch the PC5250 web browser from the URL/Hotspots fails. APAR SE35095: CA400EXP-TERMEMUL OPENING >15 PC5250 SESSIONS CRASHES PCSWS Opening more than 15 sessions causes the pc5250/PCSWS.exe to crash. Windows Reports an Access Violation and closes sessions. APAR SE35326: CA400EXP-TERMEMUL CWBEM0005 WHEN CONFIGURING COMMUNICATIONS When configuring the Communication settings for PC5250, selecting both "Use Computer Name" and "Avoid duplicate names with other workstations" results in CWBEM0005. APAR SE35381: CA400EXP-TERMEMUL Incorrect cursor position or behavior The cursor appears to move when a user on a different PC performs actions on their 5250 session and/or the cursor doesn't behave as it should. APAR SE35805: CA400EXP-TERMEMUL TRIM RECTANGLE REAPPEARS AFTER AID KEY USE Following upgrade to SI32504, the trim rectangle used for the copy function in System i Access for Windows reappears following the use of any aid key. SECURE SOCKETS LAYER (SSL) -------------------------- No fixes. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ No fixes. PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI32504 Build date = October 2008 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE35312: CA400EXP-INSTALL-INCORROUT WELCOME WIZARD ENABLED AFTER UPGRADE APAR SE35316: CA400EXP-INSTALL Secondary language install support for plug-ins APAR SE35313: CA400EXP-INSTALL-UNPRED ADMIN INSTALL CAUSES CWBSY1040 ON WINDOWS 64BIT OS APAR SE33754: CA400EXP-INSTALL-INCORROUT CAN'T INSTALL SYSTEM I ACCESS USING GROUP POLICY APAR SE34183: CA400EXP-INSTALL-INCORROUT MACHINE.CONFIG PERMISSIONS ARE MODIFIED DURING INSTALL OF THE .NET DATA PROVIDER APAR SE34652: CA400XW1-UNPRED PROGRAMMER'S TOOLKIT HELP FILES PRODUCE AN ERROR FOR JAPANESE LANGUAGE. APAR SE34884: CA400EXP-SERVICE-INCORROUT CWBSVGET GETS A FAULT WITH CWBINFEAT APAR SE35160: CA400EXP-INSTALL-UNPRED SP SI31390 CAUSES CWBSY1040 ON WINDOWS 64BIT OS. APAR SE34759: CA400EXP-NLS-INCORROUT CONVERSION FROM UTF8 TO UNICODE APAR SE33999: CA400EXP-DTRANSFER-INCORROUT PACKED TO CHARACTER CONVERSION APAR SE34758: CA400EXP-NLS-INCORROUT CONVERSION FROM UNICODE TO BIDI OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- APAR SE35281: CA400EXP QoS Inbound admission policy wizard hangs APAR SE35287: CA400EXP New RIP server is not available from GUI APAR SE35288: CA400EXP RIP GUI accepts unsupported filter types APAR SE35310: CA400EXP New DHCPv4 interface is not available from GUI APAR SE35289: CA400EXP error adding RIP IPv4 blackhole filter APAR SE35311: CA400EXP Wrong field validations for SNTP and RExec APAR SE35290: CA400EXP- DHCP Relay server properties is not displayed APAR SE35291: CA400EXP- Host Domain values are not saved from the GUI APAR SE35292: CA400EXP Inactive router timeout value is not saved APAR SE35293: CA400EXP Unable to remove OSPF IPv6 areas APAR SE35294: CA400EXP OSPF backbone area is not allowed from GUI APAR SE35295: CA400EXP Wrong buttons behavior in subsystems page APAR SE35296: CA400EXP-OPNAV-INCORROUT MGTC Delete Tasks function fails APAR SE35297: CA400EXP RouteD configuration problems APAR SE35304: CA400EXP DNS Statistics interval reported as error APAR SE35305: CA400EXP DNS v6r1 connected to v5r4 created rndc-key APAR SE35306: CA400EXP problem adding dual stack servers APAR SE35307: CA400EXP error adding servers in manage RNDC option APAR SE35309: CA400EXP error adding RIP IPv6 blackhole filter APAR SE32681: CA400EXP SMTP GUI not displayed with 5.4 systems APAR SE34055: CA400EXP- DHCP Subnet Properties fails loading subnet ranges APAR SE34077: CA400EXP- Error message displayed on DHCP subnet wizard APAR SE34308: CA400EXP- problem changing properties of a HEA interface APAR SE34631: CA400EXP Adding same OSPF area in either IP protocols fails APAR SE35159: CA400EXP wrong autostart value on telnet, FTP and SMTP GUIs APAR SE34375: CA400EXP-OPNAV MGTC IPv6 Support Implementation APAR SE34913: CA400EXP-OPNAV-INCORROUT- IPv6 Discovery Panel Issues APAR SE35385: CA400EXP ADD SERVER MODE CONNECTED THREAD TO JOB SQL DETAILS APAR SE35282: CA400EXP AVERAGE OF QUERY ESTIMATES COLUMN DISPLAYS 0.0000 APAR SE35283: CA400EXP-OPNAV-DBASE-MSGSQL0104 SORTING LIST OF TRANSACTIONS APAR SE35284: CA400EXP-OPNAV OBJECT NOT FOUND IN A PROCEDURE/FUNCTION APAR SE35285: CA400EXP-OPNAV-DBASE-MSGSQL0104 SORTING LIST OF TRANSACTIONS APAR SE35298: CA400EXP-OPNAV-DBASE-INCORROUT CONDENSED INDEX ADVICE LIST APAR SE35299: CA400EXP-OPNAV-DBASE DATABASE PREFERENCES SAVED INCORRECTLY APAR SE35300: CA400EXP-OPNAV TABLE NAME SUPPORT LONGER THAN 128 CHARACTERS APAR SE35301: CA400EXP IGNORE SQL0204 WHEN ALTER STATEMENT INCLUDES DROP APAR SE35302: CA400EXP-OPNAV-DBASE PARTITION FILTER ERROR IN STATISTICS APAR SE35303: CA400EXP STATISTICS DATA DISPLAYS 1ST PARTITION MEMBER INFO APAR SE35308: CA400EXP-OPNAV-DBASE INDEXES LIST INSTEAD MQTs LIST FROM VE APAR SE34965: CA400EXP UNABLE TO PERFORM ACTION WITH *JOBCTL AUTHORITY APAR SE35286: CA400EXP-OPNAV ADD PRINTER WIZARD PORT NUMBER WRONG APAR SE33505: CA400EXP-OPNAV UNABLE TO LAUNCH SYSTEM I NAVIGATOR APAR SE34372: CA400EXP-OPNAV-PRINTERS ADD PRINTER WIZARD PORT NUMBER INCORRECT APAR SE34466: CA400EXP-OPNAV CWBUNNAV.EXE FAILS WITH SECUR32.DLL FAULTING DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE35138: CA400EXP-DTRANSFER CREATION OF STD FDF BY DEFAULT IS NEEDED APAR SE34941: CA400EXP-DTRANSFER-INCORROUT CWBDB0014 WHEN BROWSING MEMBER DATA TRANSFER EXCEL ADD-IN -------------------------- APAR SE33886: CA400EXP-DTRANSFER CWBTF0073 ON UPLOAD WITH EXCEL ADD-IN APAR SE34570: CA400EXP-DTRANSFER ADD-IN FAILS TO UPLOAD DATE OR TIME CELLS ODBC ---- APAR SE34540: CA400EXP-ODBC-UNPRED SQLSETCONNECTATTR CURRENTCATALOG FAILS APAR SE35097: CA400EXP-ODBC-INCORROUT SQLGETDATA CAUSES FAULT OLE DB PROVIDER --------------- APAR SE34359: CA400EXP-OLEDB-INCORROUT SQL UPDATE STATEMENT FAILS USING IBMDASQL OLE DB PROVIDER. .NET DATA PROVIDER ------------------ APAR SE35315: CA400EXP-IDB2DATA-MSGSYSTEM.ACCESSVIOLATIONEXCEPTION WITH IDB2DATAREADER AND DISPOSED COMMAND APAR SE33957: CA400EXP-IDB2DATA-INCORROUT STACKOVERFLOWEXCEPTION READING IDB2TRANSACTION.CONNECTION PROPERTY APAR SE34938: CA400EXP-IDB2DATA-F/QSQRUN1-T/QSQRUN1-MSGSQL0519 THE IBM.DATA.DB2.ISERIES .NET PROVIDER IS NOT CLOSING AN SQL CURSOR APAR SE34166: CA400EXP-IDB2DATA-THREADS-INCORROUT FAULT WITH DISTRIBUTED TRANSACTIONS LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.3 (2008-08-29) and the equivalent of PTF 5761JC1 SI32768. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20080919 APAR SE33455: CA400EXP-TERMEMUL-INCORROUT DUP KEY BEHAVES DIFFERENTLY ON WINDOWS XP THAN IT DOES WITH WINDOWS 2000. APAR SE33459: CA400EXP-PRINTEMUL INCORRECT OUTPUT WITH ESC_P.PDT APAR SE33610: CA400EXP-PRINTEMUL PRINTER EMULATION FAILURE WITH NO PDT AND SI30707 APAR SE33691: CA400EXP-TERMEMUL-INCORROUT PC5250 EMULATOR SCREEN HANGS APAR SE33740: CA400EXP-TERMEMUL-UNPRED KONICA MINOLTA PRINTER SUPPORT APAR SE34002: CA400EXP-TERMEMUL-INCORROUT IN USER-DEFINED SCREENS, THE "PC" DDS KEYWORD IS IGNORED WHEN THE DISPLAY REFRESHES. APAR SE34044: CA400EXP-TERMEMUL-UNPRED FOLLOWING INSTALLATION OF SI29771 FOR V5R4 OF 5722XE1, USERS RECEIVE PCSWS041 APAR SE34106: OSP-PAR-940XMISC AFTER SI30707 INSTALLATION V5R3 5722XE1, PCSWS041 RECEIVED ATTEMPTING TO RUN MACRO ON WINDOWS 2003 SERVER APAR SE34184: CA400EXP-TERMEMUL-UNPRED PCSWS.EXE FAILS WITH PCSWLIB.DLL FAULTING ON PC5250 LAUNCH APAR SE34231: CA400EXP-PRINTEMUL VIETNAMESE SUPPORT FOR PC5250 PRINTER EMULATION APAR SE34629: CA400EXP-TERMEMUL-UNPRED PASTE INTO AN PC5250 SESSION WILL LET THE SESSION DIE WITHOUT A MESSAGE SECURE SOCKETS LAYER (SSL) -------------------------- APAR SE33913: CA400EXP-SSL-UNPRED SETTING TLS CIPHER ENV VAR FAILS PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ APAR SE34459: CA400EXP-OPCON-INCORROUT LAN RCP FUNCTION 21 FAILS PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI31390 Build date = July 2008 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE33915 : CA400EXP-INSTALL NO SECONDARY LANGUAGE SUPPORT IN V6R1 APAR SE33680 : CA400EXP-INSTALL-INCORROUT CUSTOM AND PC5250 INSTALL TYPES BEHAVE WRONG APAR SE32538 : CA400EXP-INSTALL-UNPRED INSTALLATION OF ADDITIONAL FEATURES FROM DVD FAILS WITH PROMPT FOR DVD. APAR SE33006 : CA400EXP-SERVICE-INCORROUT CWBSVGET DOESN'T WORK ON VISTA OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- APAR SE33562 : CA400EXP-OPNAV-DBASE-INCORROUT UPDATE NOT SAVED INTO SERVER APAR SE33563 : CA400EXP-INCORROUT-DISK IASP Jobs is not available in web APAR SE33564 : CA400EXP-OPNAV-DBASE CREATING NEW SOURCE FUNCTION WITH UDT APAR SE33565 : CA400EXP-OPNAV CORRUPTED PATH DIRECTORIES IN SECURED OBJECTS APAR SE33107 : CA400EXP-OPNAV IASP QSYS displays the contents of QSYS APAR SE33569 : CA400EXP-OPNAV-INCORROUT Wrong host for Integrated Server APAR SE33570 : CA400EXP-OPNAV INCOMPATIBLE AUTHORITY USING /QSYS.LIB APAR SE33571 : CA400EXP-OPNAV Exclude from Parity Set option unavailable APAR SE33572 : CA400EXP-OPNAV-DBASE-INCORROUT GIANT ICON IN VISUAL EXPLAIN APAR SE33573 : CA400EXP-OPNAV Work with copy description resources fails APAR SE33574 : CA400EXP-OPNAV-DBASE PREFERRED FOLDER WHEN OPENING A SCRIPT APAR SE33575 : CA400EXP-OPNAV-DBASE-INCORROUT COMMENTS IN AN SQL PACKAGE APAR SE33576 : CA400EXP-OPNAV-DBASE USER PREFERENCES NOT HONORED IN MAPS APAR SE33577 : CA400EXP-OPNAV-DBASE-INCORROUT CURSOR IN RSS IS LOST APAR SE33578 : CA400EXP-OPNAV HANDLE NULL POINTER EXCEPTION IN PLAN CACHE APAR SE33579 : CA400EXP-OPNAV-DBASE INVALID ERROR WITH CORRECT SHORT NAME APAR SE33581 : CA400EXP-OPNAV INDEX ADVISED NOT GENERATED CORRECTLY FROM VE APAR SE33582 : CA400EXP-OPNAV Collect Attributes invalid file prefix error APAR SE33583 : CA400EXP-OPNAV NESTED BRACKETED COMMENTS IN RUN SQL SCRIPTS APAR SE33584 : CA400EXP-OPNAV TRIPLE DES AND RC4 ALGORITHMS NOT RECOGNIZED APAR SE33585 : CA400EXP ISW does not commit wizard configuration APAR SE33586 : CA400EXP ADD SERVER MODE CONNECTING JOB TO JOB SQL DETAILS APAR SE33587 : CA400EXP-OPNAV Reattach Metro Mirror session hangs APAR SE33588 : CA400EXP-OPNAV-FILESYS Object properties on IASP not shown APAR SE33589 : CA400EXP Create Modem with parameters command empty APAR SE33590 : CA400EXP-INCORROUT-GUI DOES NOT SUPPORT MULTIDEVD APAR SE33591 : CA400EXP profile not created if remote authentication is set APAR SE33592 : CA400EXP Local system identification not saved for RCP APAR SE33593 : CA400EXP SMTP schedule attribute dismatch in AT&T summary APAR SE33594 : CA400EXP named.conf is not updated with the generated key APAR SE33595 : CA400EXP save master copy of data does not create the files APAR SE33596 : CA400EXP-OPNAV-DBASE UNABLE TO EXPLAIN CREATE OF MQT TABLE APAR SE33566 : CA400EXP-OPNAV Enable Global mirror functions for GUI APAR SE33567 : CA400EXP IPv6 Enhancements for TCP/IP applications APAR SE29734 : CA400EXP-OPNAV-INCORROUT USER NETWORKS OPTION FAILS APAR SE30855 : CA400EXP Help is not available on Rules Editor. APAR SE32165 : CA400EXP-OPNAV ERRORS WHEN APPLICATION ADMINISTRATION IS NOT INSTALLED APAR SE32235 : CA400EXP-OPNAV-INCORROUT BAD INVENTORY EXPORT STORAGE VALUE APAR SE32527 : CA400EXP-OPNAV-DBASE-MSGSQL0551 EDIT CONTENTS OF A TABLE APAR SE32734 : CA400EXP-OPNAV ISERIES NAVIGATOR PERFORMANCE ADVISOR STOPS APAR SE33434 : CA400EXP-OPNAV-DBASE-INCORROUT PARTITIONED TABLE DEFINITION APAR SE33354 : CA400EXP-OPNAV-INCORROUT UPDATE FIX-GROUPS TASK FAIL APAR SE32748 : CA400EXP-OPNAV-INCORROUT SELECTING PERMISSIONS FOR AN OBJECT APAR SE33244 : CA400EXP-OPNAV-INCORROUT CENTRAL SYSTEM CHANGE PROBLEM DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE31984 : CA400EXP-DTRANSFER-LOOP RXFERPCB GOES INTO AN ENDLESS LOOP APAR SE32445 : CA400EXP-DTRANSFER-MSGCWBDB0052 INCORRECT ROW NUMBER APAR SE32745 : CA400EXP-DTRANSFER CUSTOMIZED DEFAULT DATE FORMAT IS NEEDED APAR SE33119 : CA400EXP-DTRANSFER-INCORROUT FDF DEFAULT PATH IS NOT DEFINED APAR SE33249 : CA400EXP-DTRANSFER-INCORROUT IASP PARAMETER IS IGNORED APAR SE33421 : CA400EXP-DTRANSFER UPLOADING XML FILES CAUSES VARIOUS ERRORS APAR SE33422 : CA400EXP-DTRANSFER-INCORROUT FIELD NAMES ARE ALPHEBETIZED APAR SE32981 : CA400EXP-DTRANSFER-MSGCWBDB0052 RETRIEVING A LIST OF LIBRARIES AND FILES FAILED ON JAPANESE SYSTEM I ACCESS DATA TRANSFER EXCEL ADD-IN -------------------------- APAR SE32745 : CA400EXP-DTRANSFER CUSTOMIZED DEFAULT DATE FORMAT IS NEEDED APAR SE33119 : CA400EXP-DTRANSFER-INCORROUT FDF DEFAULT PATH IS NOT DEFINED APAR SE32981 : CA400EXP-DTRANSFER-MSGCWBDB0052 RETRIEVING A LIST OF LIBRARIES AND FILES FAILED ON JAPANESE SYSTEM I ACCESS ODBC ---- APAR SE33580 : CA400EXP-DATABASE-MSGSQL0401 using translate hex connection property APAR SE32285 : OSP-INCORROUT MSGSQL0104 LINUX ODBC DRIVER wrong length stmt APAR SE32817 : CA400EXP-ODBC-INCORROUT STORED PROCEDURE CALLS FAIL WITH {} APAR SE33393 : CA400EXP-ODBC-INCORROUT GARBAGE DATA APPENDED TO DATA RETURNED FOR RESULT SET. OLE DB PROVIDER --------------- APAR SE32880 : CA400EXP-OLEDB-INCORROUT QUERY OPTIONS LIBRARY NOT SET FROM SQL SERVER APAR SE33580 : CA400EXP-DATABASE-MSGSQL0401 using translate hex connection property .NET DATA PROVIDER ------------------ APAR SE33568 : CA400EXP-IDB2DATA GetDataSources() strings contain garbage characters APAR SE33517 : CA400EXP-IDB2DATA-INCORROUT EXCEPTION WITH EMPTY STRING PARAMETERS APAR SE32401 : CA400EXP-IDB2DATA-INCORROUT CONNECTION TIMEOUT NOT WORKING LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.2 (2008-04-30) and the equivalent of PTF 5761JC1 SI31554. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20080430 APAR SE29943 : CA400EXP 5250 SESSION HANG WHEN THE MIXED DATA WAS PASTED. APAR SE31610 : CA400EXP-PRINTEMUL PRINTER EMULATION ENDS ABNORMALLY WITH PDT CONTAINING START_JOB WITH MORE THAN 255 BYTES APAR SE32283 : CA400EXP-TERMEMUL-INCORROUT COPY AND PASTE AT G TYPE FIELD PCOMM APAR IC55304 APAR SE32400 : CA400EXP-TERMEMUL-INCORROUT PC5250 KEYBOARD ERROR WILL NOT RESET APAR SE32408 : OSP-PAR-940XCOM CURSOR POSITIONED INCORRECTLY AFTER UPGRADE TO R540 ACCESS FOR WINDOWS APAR SE32924 : CA400EXP-TERMEMUL-UNPRED PCSWS.EXE FAILS DURING PLAYING MACRO ON 5250 SESSION WITH VISTA. CODE PAGES 1399 OR 1390. APAR SE33046 : CA400EXP-TERMEMUL-INCORROUT PASTING DBCS/SBCS MIXED DATA TO O-TYPE FIELD INCORROUT APAR SE33077 : CA400EXP-TERMEMUL-INCORROUT * AT THE END OF A URL IS IGNORED APAR SE33291 : CA400EXP-TERMEMUL-MSGPCSERR100 PC5250 ABENDS WITH PCSERR100 ERROR SECURE SOCKETS LAYER (SSL) -------------------------- No fixes. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ APAR SE33431 : CA400EXP-OPCON-INCORROUT IP address as config name fails PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI31251 Build date = March 2008 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE32355 : CA400EXP-INSTALL-INCORROUT CHECK VERSION IGNORES CMDLINE PARMS SPECIFIED IN SETUP.INI APAR SE32356 : CA400EXP-INSTALL-INCORROUT CWBLAUNCH.EXE IGNORES CMDLINE PARMS SPECIFIED IN SETUP.INI APAR SE30681 : CA400EXP-NLS-INCORROUT CONVERSION FROM CCSID 5035 TO 932 APAR SE32877 : CA400EXP-OPNAV-OTHER-UNPRED NO SYSTEM I NAVIGATOR PLUGINS WERE DETECTED IN YOUR SOURCE DIRECTORY OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- APAR SE30805 : CA400EXP-INRMTCMD-INCORROUT EXECUTING GRAPHICAL APPLICATIONS System i NAVIGATOR ----------------- APAR SE31184 : CA400EXP-OPNAV-INCORROUT CLUSTER GUI SUPPORT FOR i5OS V6R1 APAR SE31263 : CA400EXP-OPNAV-INCORROUT Error message when creating a user APAR SE31191 : CA400EXP-OPNAV-DBASE DISTINCT VALUES CREATING ADVISED INDEX APAR SE32302 : CA400EXP-OPNAV-FILESYS Corrupt characters in column headers APAR SE31816 : CA400EXP-OPNAV-INCORROUT No Message QUEUE/LIBRARY on Monitor APAR SE32303 : CA400EXP UCW does not force selection of country APAR SE32304 : CA400EXP Wait for Dial tone checkbox shows inconsistency APAR SE32305 : CA400EXP Packet Rules is not shown under IPv6 interfaces APAR SE32306 : CA400EXP OPNAV CRASHES USING DRAG AND DROP IN NEW VIEW DIALOG APAR SE32307 : CA400EXP Error displaying VPN responer connection APAR SE32331 : CA400EXP Rules Editor hangs displayed from Group Access APAR SE32332 : CA400EXP VPN default settings causes an exception APAR SE32333 : CA400EXP Can not change IKE local key identifier in VPN APAR SE32073 : CA400EXP-OPNAV SCRIPT NOT SAVED WITH CLOSE GROUP ACTION APAR SE32334 : CA400EXP-OPNAV-FILESYS Various NLS problems APAR SE32335 : CA400EXP ISP connection does not save internal resource APAR SE32308 : CA400EXP Language network GUI problems APAR SE32309 : CA400EXP-OPNAV-DBASE UNABLE TO EXPLAIN AN OBJECT IN AN IASP APAR SE32310 : CA400EXP-OPNAV-DBASE-INCORROUT CURSOR IN RSS IS LOST APAR SE32311 : CA400EXP-OPNAV JDBC SETUP USE LIBRARY LIST FOR SERVER JOB APAR SE32312 : CA400EXP-OPNAV-DBASE CONTEXT MENU OPTION MISSING IN ADVISOR APAR SE32313 : CA400EXP-OPNAV CHANGE FORMAT DATE AND RSA KEY TRANSLATED APAR SE32314 : CA400EXP-OPNAV-DBASE OPERATORS AND FUNCTIONS IN EXPRESSIONS APAR SE32315 : CA400EXP-OPNAV-DBASE CANNOT IMPORT SQL PLAN CACHE DATA FILE APAR SE32316 : CA400EXP L2TP Remote Dial profile tries to dial *NONE APAR SE32317 : CA400EXP Physical line is not created for PPPoE APAR SE32318 : CA400EXP Incorrect profile Script ASCII value APAR SE32319 : CA400EXP incorrect modem retrieved by Profile APAR SE32320 : CA400EXP Optional Modem parameters are not saved in PPP APAR SE32321 : CA400EXP-OPNAV-DBASE FORMAT NUMBER IN HEALTH CENTER APAR SE32322 : CA400EXP-OPNAV-DBASE SQL ASSIST IS NOT CONNECTED APAR SE32323 : CA400EXP-OPNAV-DBASE -MSGSQL0104 CONTROL STATEMENT SEMICOLON APAR SE32324 : CA400EXP-OPNAV-DBASE UNABLE TO LOAD STRING IN REORGANIZE APAR SE32337 : CA400EXP SLIP Leased terminator profiles hangs on save APAR SE32338 : CA400EXP ICMP version 6 not support in filter rules APAR SE32339 : CA400EXP Able to enter invalid group name in L2TP APAR SE32340 : CA400EXP Can not change Remote Key Server in VPN connections APAR SE32341 : CA400EXP FRAGMENT should not be included on permitnonVPNv6 APAR SE32342 : CA400EXP DNS TTLs units are set in English only APAR SE32353 : CA400EXP problems in Multiple Domains and Bindings panels APAR SE32354 : CA400EXP L2TP profile does not save line validation list APAR SE32357 : CA400EXP-OPNAV-DBASE AVERAGE OF QUERY ESTIMATES IN ADVISOR APAR SE32358 : CA400EXP Internal modem 576C missing APAR SE32399 : CA400EXP-OPNAV OBSOLETE TASK DISPLAYED AFTER UPGRADE APAR SE29597 : CA400EXP-OPNAV-INCORROUT CLUSTER ADMIN DOMAIN MRE LIST ERROR APAR SE29905 : CA400EXP-OPNAV-PRINTERS-INCORROUT UNABLE TO SORT PRINTER OUTPUT APAR SE29980 : CA400EXP-OPNAV-INCORROUT APPLICATION ADMINISTRATION PLUG-INS SETTING IS NOT WORKING AS DESIGNED APAR SE30770 : CA400EXP-OPNAV CONFIGURATION AND SERVICE FAILS WITH CPF3CF1 APAR SE30848 : CA400EXP-OPNAV- ERROR CREATING NEW USER WITH JAPANESE CLIENT APAR SE31060 : CA400EXP-OPNAV-DBASE-MSGCWB0111 UPDATING A CHARACTER COLUMN APAR SE31061 : CA400EXP-OPNAV-DBASE-INCORROUT UPDATE NOT SAVED INTO SERVER APAR SE31229 : CA400EXP IPv4 interface properties is not diplayed APAR SE32025 : CA400EXP-OPNAV ADVANCED JOB SCHEDULER CONTAINER IS EMPTY APAR SE32448 : CA400EXP-OPNAV-INCORROUT QLMTDEVSSN inaccurately described APAR SE31085 : CA400EXP-OPNAV-INCORROUT when display strings in norwegian APAR SE32051 : CA400EXP-OPNAV MGTC Fix Task mix Fixes and Fix Groups DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR SE31895 : CA400EXP-DTRANSFER FILE TYPE CHANGED AFTER MSGCWBTF0002 DATA TRANSFER EXCEL ADD-IN -------------------------- APAR SE31662 : CA400EXP-DTRANSFER ADD-IN FAILS WITH TIME FORMATTED CELLS ODBC ---- APAR SE30295 : CA400EXP-ODBC-INCORROUT INCORRECT TYPE CONVERSION USED APAR SE30749 : CA400EXP-ODBC-WAIT HANG ENDING XA ENLISTMENT OLE DB PROVIDER --------------- APAR SE30751 : CA400EXP-INCORROUT DISTRIBUTED TRANSACTION WITH SQL SERVER 2005 AND IBMDASQL FAILS. APAR SE30788 : CA400EXP-OLEDB-MSGSQL0104 DUE TO SINGLE LINE COMMENTS IN SQL APAR SE31868 : CA400EXP-OLEDB-INCORROUT ADSCHEMACOLUMNS FOR OPENSCHEMA METHOD RETURNS NO RESULTS .NET DATA PROVIDER ------------------ APAR SE32325 : CA400EXP-IDB2DATA iDB2Permission fails in 64-bit LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- APAR SE32359 : CA400EXP-AFPVIEWER OpNav View spooled file fails on Vista APAR SE31194 : CA400EXP-AFPVIEWER-INCORROUT DISPLAY FAILS TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.1 (2008-01-15) and the equivalent of PTF 5761JC1 SI29813. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20080208 APAR SE32336 : CA400EXP-TERMEMUL-INCORROUT CORRUPTED PRINTER DIALOG STRINGS APAR SE30424 : CA400EXP-TERMEMUL-INCORROUT THE CURSOR DOES NOT APPEAR ON THE FIELD IF THAT IS APAR SE30508 : CA400EXP-TERMEMUL-UNPRED IN A KOREAN INSTALL ENVIRONMENT, SWITCHING BETWEEN APPLICATIONS APAR SE30613 : CA400EXP-TERMEMUL-INCORROUT CLOSING SESSION WITH FILE EXIT ALL CAUSES APPLICATION APAR SE31152 : CA400EXP-TERMEMUL-INCORROUT PC5250 DOES NOT SUPPORT GREEK ALPHABETIC CHARACTERS SECURE SOCKETS LAYER (SSL) -------------------------- APAR SE30656 : CA400EXP-SSL-MSGCWBCO1052 STASH PASSWORD IS NO LONGER CHECKED BY DEFAULT. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ No fixes. PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. --------------------------------- Service Pack Level = SI29455 Build date = November 2007 --------------------------------- REQUIRED PROGRAMS ----------------- APAR SE30715 : CA400EXP-INSTALL-INCORROUT General Availability Updates. V6R1M0 GA fixes. Build 20071122. OPTIONAL COMPONENTS ------------------- INCOMING REMOTE COMMAND ----------------------- No fixes. System i NAVIGATOR ----------------- No fixes. DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- No fixes. DATA TRANSFER EXCEL ADD-IN -------------------------- ODBC ---- No fixes. OLE DB PROVIDER --------------- No fixes. .NET DATA PROVIDER ------------------ No fixes. LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. TOOLBOX FOR JAVA ---------------- Includes JTOpen 6.1 (11/1/2007) and the equivalent of PTF 5761JC1 SI29061. 5250 DISPLAY AND PRINTER EMULATION ---------------------------------- PC5250 Version 5.9 Level 20071102 SECURE SOCKETS LAYER (SSL) -------------------------- No fixes. PRINTER DRIVERS --------------- AFP PRINTER DRIVER ------------------ No fixes. SCS PRINTER DRIVER ------------------ No fixes. OPERATIONS CONSOLE ------------------ No fixes. PROGRAMMER'S TOOLKIT -------------------- HEADERS, LIBRARIES, AND DOCUMENTATION ------------------------------------- No fixes. JAVA PROGRAMMER'S TOOLS ----------------------- No fixes. 4.0 INSTALL/UNINSTALL CONSIDERATIONS ------------------------------------- The following sections describe additional support and known problems that you may notice while using the Install/Uninstall function. 4.1 REMOVING THE SERVICE PACK ------------------------------ You cannot remove a service pack that was installed by running setup.exe from an updated installation image. In order to revert a service pack that was installed in this fashion, you must first uninstall System i Access for Windows and re-install it using an image that is at an older service level, such as the image available on the System i Access for Windows DVD. The SI31251 service pack download available on the System i Access FTP site can be uninstalled individually; however, due to significant changes introduced to the installation support during service pack SI31390, individual service packs cannot longer be removed starting with SI31390. Please refer to the readme.txt file that accompanies each service pack for details on service pack uninstall support. ftp://ftp.software.ibm.com/as400/products/clientaccess/win32/v6r1m0/servicepack/ 4.2 UNABLE TO INSTALL FROM THE SERVICE SOURCE? ----------------------------------------------- If you experience problems while installing a service pack over slow communication lines, and if installing from a DVD or a faster connection is not possible, then the service pack could be installed in this manner: 1) A setting exists on the System i Access for Windows Properties Service tab that will copy the service pack image to the PC's temporary directory, install the service pack, then remove the copied files. To use this support you will need to specify this setting ("Copy install image to PC before installing"). 2) Run Check Service Level (either from the IBM System i Access for Windows Service folder shortcut or when Check Service Level runs at system boot on its defined schedule) STATUS: No status information is displayed while the files are copied. To determine if the transfers are progressing, look in the 'CA400CKV' temporary directory (beneath the PC temporary directory, for example C:\Documents and Settings\username\Local Settings\Temp). You should see new files appear periodically. 3) Proceed through the install wizard to complete the install. 4.3 SERVICE PACK CONTROL ------------------------- To prevent users from installing the Service Pack, an administrator can use the SP.TXT file. If the administrator places a file named SP.TXT (with a 'N' in the first position of the first line) in the service pack installation image directory, the service pack will not be installed. 5.0 DATA TRANSFER CONSIDERATIONS --------------------------------- The following sections describe additional support or known problems that you may notice while using the Data Transfer function. 5.1 TRANSFERRING DATA WHEN THE FILE OR DATA CCSID IS 65535 ----------------------------------------------------------- WHY DOES MY DATA LOOK LIKE GARBAGE WHEN I PERFORMED A DOWNLOAD? By default, the Data Transfer function will not convert data between EBCDIC and ASCII if the data is tagged with a CCSID of 65535. In older versions of the Win 95/NT Client Access product, the 65535 conversion was controlled by the CWBTFR.INI file. This process has been changed, and the conversion is now controlled by the Data Transfer user interface. Once the setting has been made in the user interface, it is then stored in the transfer request. This is only true for .TTO, .TFR, .DTT, and .DTF files. .RTO and .DT files are still controlled by the CWBTFR.INI file. The conversion setting for .RTO and .DT files can be modified in the Data Transfer user interface, but the setting will not be saved. The setting to control the conversion is found in the File, Properties information. WARNING: This feature is designed as a workaround for people that can not change the CCSID of their files. In order for this translation to work properly, you must be confident the data in the file matches the CCSID of your user profile. The design of the System i is that data with a 65535 CCSID are not to be converted. This feature will attempt to do a conversion of the data from the job CCSID to the PC CCSID. This conversion may not work if the data in the file does not match the user profile/job CCSID. The correct solution to this problem is to appropriately tag the data with the correct CCSID. One way of doing this is by using CHGPF. For more information on the 65535 CCSID, please reference the System i National Language Support Manual.