======================================================================== Readme File for AS/400 Client Access Express for Windows Service Packs 5722-XE1 V5R1M0 Cumulative Service Pack Level ------------- SI06804 ------------- (c) Copyright IBM Corporation 2000. All rights reserved. ======================================================================== NOTICE: ------- Application of this PTF may disable or render ineffective programs that use system memory addresses not generated by the IBM translator, including programs that circumvent control technology designed to limit interactive capacity to purchased levels. This PTF may be a prerequisite for future PTFs. By applying this PTF you authorize and agree to the foregoing. IMPORTANT: If you are a Management Central user, it is very important that you review the information in APAR SE02365 if you have not previously installed service pack SI01907. There are PTFs for the 5722SS1 product that must be applied to your Central System and all endpoints in order to connect to V5R1M0 Management Central servers. If you already addressed this during the installation of SI01907, this action is not required for the installation of this service pack. ----------------- Table of Contents ----------------- 1.0 INSTALLATION INSTRUCTIONS 1.1 INSTALLING FROM AN AS/400 SYSTEM 1.2 INSTALLING FROM A LOCAL OR NETWORK DRIVE 1.3 COMBINING THE SERVICE PACK WITH A CLIENT ACCESS EXPRESS INSTALLATION IMAGE 2.0 RESTRICTIONS 2.1 OPERATIONS NAVIGATOR 2.2 OPERATIONS CONSOLE 3.0 AUTHORIZED PROGRAM ANALYSIS REPORT (APAR) ABSTRACTS - SERVICE PACK LEVEL = SI06804 (November 2002) 4.0 INSTALL/UNINSTALL CONSIDERATIONS 4.1 REMOVING THE SERVICE PACK 4.2 UNABLE TO INSTALL FROM THE SERVICE SOURCE? 4.3 SERVICE PACK CONTROL 5.0 DATA TRANSFER CONSIDERATIONS 5.1 TRANSFERRING DATA WHEN THE FILE OR DATA CCSID IS 65535 --------------------------------------------------------------------- 1.0 INSTALLATION INSTRUCTIONS ------------------------------ 1.1 INSTALLING FROM AN AS/400 SYSTEM --------------------------------------------- The following method would be used if you have received the Client Access Express service pack through the AS/400 PTF ordering process either as an individual PTF order or as part of an OS/400 PTF cumulative package. Once this service pack has been applied to an AS/400 system with the LODPTF and APYPTF AS/400 commands, it can be installed on individual PC's with the "Check Service Level" or "Install Service Pack" shortcuts in the Client Access Express Service folder. Check Service Level, controlled by the Client Access Properties Service tab, will detect that the Service source directory has been updated, and will present the user with the option to install the service pack at startup time as well. The APYPTF will update the Express install image directory (\QIBM\ProdData\CA400\Express\Install\Image) on the AS/400. Any client that installs V5R1 Express (or selected components) from this image will automatically receive this service pack level (no extra steps or reboots). In this scenario, the service pack cannot be uninstalled on the client PC because it is merged in with the base release. RMVPTF will restore your AS/400 install image to the prior service level (or the base release if there was no prior service pack applied). 1.2 INSTALLING FROM A LOCAL OR NETWORK DRIVE --------------------------------------------- The following method would be used if you have received the Client Access Express service pack as a set of install image files. Install the service pack by running the "SETUP.EXE" program from your PC. This program is part of the install image files shipped with a service pack. If you change the Client Access Properties Service tab Source Directory to the directory containing these install image files, you can also use the "Check Service Level" or "Install Service Pack" shortcuts in the Client Access Express Service folder. Before running this program, copy the service pack install image files to a local drive on your PC or to any accessible network drive. Once the install setup program has completed, you can then remove the install image files from that drive. 1.3 COMBINING THE SERVICE PACK WITH A CLIENT ACCESS EXPRESS INSTALLATION IMAGE ------------------------------------------------------------------------------- The following method could be used if you downloaded the service pack image from the iSeries Client Access web page location: http://www-1.ibm.com/servers/eserver/iseries/clientaccess/casp.htm With V5R1M0, the Client Access Express service pack PTFs are combined with the original Client Access Express installation image in QIBM\ProdData\Ca400\Express\Install\Image This means that a user can install (or upgrade) Client Access Express from this combined image directory and get the latest applied service level automatically in one integrated step - since the original installation image files have been replaced by updated versions via the service pack PTF. Selectively installing components from this combined image directory will also automatically get the latest applied service level for that component. If you tailor the Client Access Express install image to another directory (for instance, on another server), using the Create Tailored Installation Image (cwbinimg.bat) tool, you can use the PTFFORM.EXE download in the FTP directory to duplicate the function of applying the AS/400 PTF by following these steps: 1. Download PTFFORM.EXE (from the tailored/ FTP directory) to a clean temporary directory. 2. Run PTFFORM.EXE to expand the service pack files. 3. Delete PTFFORM.EXE after expansion. 4. Copy the contents of this temporary directory over a tailored Client Access Express installation image, selecting the option to replace any existing file. Now you have combined this service pack level with the Client Access Express installation image, so that users can install Client Access Express plus this service pack in one integrated step. Note that this procedure also works if the installation image has already been combined with a prior service pack level. This procedure will replace the prior service level in the combined image with this new level. Alternatively, if you have a full copy of the original Client Access Express install image in a directory, you can combine PTFFORM.EXE with this full image, using the same 4-step procedure detailed above. Then you can run Create Tailored Installation Image (cwbinimg.bat) from this full image directory, to create tailored image directories that will automatically have the service pack merged in. Tailoring from a full image after combining PTFFORM.EXE takes more time, but results in a more efficient resulting image from a disk space standpoint. 2.0 RESTRICTIONS ----------------- 2.1 OPERATIONS NAVIGATOR ------------------------- 1) Due to technology incompatibilities, occasionally a window can be displayed behind other windows when running the Operations Navigator. If the Operations Navigator looks like it has stopped working, it is possible that the window you are waiting for is being displayed behind another window on your desktop. Press the Alt key and then the Tab key to see a list of all the windows on your system and select window behind the Operations Navigator window, or another window on your desktop. 2) When using Operations Navigator on a Windows 95 PC: For Windows 95, at least the 'a' level service pack must be installed. To determine if you are running Windows 95 A or later, click Start, point to Settings, click Control Panel, then double-click System. If the version number reported is 4.00.950 A or later, no action is required. Your system already contains the appropriate fix. If you do need to install the update, it is available at http://www.microsoft.com/windows95/downloads/contents/ WURecommended/S_WUServicePacks/W95SvcPack1/Default.asp Windows/95 PCs with back level versions of winsock may experience the following runtime errors in Operations Navigator when using Visual Explain (under Database), Windows Administration (under Network), or Disk units (under Hardware Inventory in Configuration and Service): ExceptionInInitializerError NoClassDefFoundError If you experience the above errors, the solution is to update the winsock.dll to version 4.10.1656. This update can be found on the Microsoft download website at: http://www.microsoft.com/windows95/downloads/ Then take the link for "Windows Socket 2 Update" 2.2 OPERATIONS CONSOLE ----------------------- 1) Use of Windows/95 as an operating system for the Local Controlling System is NOT recommended. 2) It is recommended that you restrict LAN topologies for LCS attachment to a single, physical ring/hub/switch fabric. In the event that the LCS is used in a larger network topology, broadcast (DHCP) packet filtering is always recommended. 3) The maximum number of concurrent active sessions via the PCOM 5250 emulator is 26. 4) If an automatic session re-connect to an OS/400 image on an iSeries or AS/400 server on Operations Console start-up fails, simply use the manual re-connect process by right-clicking the connection profile that failed to re-connect and selecting 'Connect'. 3.0 AUTHORIZED PROGRAM ANALYSIS REPORT (APAR) ABSTRACTS -------------------------------------------------------- This a list of APAR fixes included in this service pack. Each service pack is cumulative; the current service pack includes all the fixes from the prior service pack levels. The APAR abstracts are listed by installable component within a service pack level. --------------------------------- Service Pack Level = SI06804 Build date = November 2002 --------------------------------- EXPRESS REQUIRED PROGRAMS ------------------------- APAR = SE07116 OSP-PAR CWBCO1004 MESSAGE RETURNED FOR LOCAL PORT LOOKUP Incorrect message is being returned. Message stated that the associated Ip address could not be found. Please associate message cwbco1011. Correction for APAR SE07116: ---------------------------- The CWBCO1011 message was not mapped correctly to return code 11004. This will be fixed. Circumvention for APAR SE07116: ------------------------------- Use the Operations Navigator system Verify function or the cwbping command to see the correct messages. APAR = SE07140 CA400EXP-ODBC-INCORROUT SMALL MEMORY LEAK ASSOCIATED WITH OD An application constantly allocates and frees the odbc environment handle. This causes the driver manager to load/unload the Client Access Express odbc driver dll (cwbodbc.dll) each time. There is a small memory leak in one or more Client Access dlls that cwbodbc.dll links to causing a small but steady loss of memory each time the dll is loaded/unloaded. Correction for APAR SE07140: ---------------------------- The CWBNL.DLL was leaking memory when repeatedly loaded and unloaded within the same process. Circumvention for APAR SE07140: ------------------------------- Change application configuration to prevent the loading and unloading of the DLL. APAR = SE07361 CA400EXP-DTRANSFER-INCORROUT TRANSFERRING TO CCSID 13488 Data Transfer To AS/400 fails with messages "CWBDB0036 - The Database Access server returned a SQL error." and "SQL0189 - CCSID 850 is not valid." when transferring data to AS/400 files that contain Unicode fields (GRAPHIC CCSID 13488). This problem also occurs on PC's with client CCSIDs other than 850. APAR = SE07669 OSP-PAR CLIENT ACCESS LICENSE NOT ALWAYS RELEASING AFTER SET In the Other tab of the Client Access Properties, there is a setting for Client Access Express license releasing. The license is not always released after this set time due to a timing bug. This could cause CWBLM0011 to be intermittently generated when trying to connect with Client Access Express licensed functions. APAR = SE07950 CA400EXP-TERMEMUL-MSGCWBLM0011 CWBLM0011 ERROR WITH CLIENT Client Access Express PC5250 fails with CWBLM0011. The error seems to also affect Windows administrator accounts. APAR = SE08029 CA400EXP-DTRANSFER-WAIT CWBLMSRV.EXE INHERITING THE FILE Customer runs RTOPCB.EXE in a PC batch file outputting STDOUT into a log file for later analysis. After upgrading from CA R450 to CA R510, the write to the log file fails after the first run in the batch with "access denied" type messages. Customer has discovered that after running RTOPCB.EXE once, RTOPCB appears to hold a lock on the log file for 30 seconds to several minutes after the run completes. APAR = SE08032 OSP-PAR RUNNING STRPCCMD DOES NOT WORK ON THE FIRST SESSION Running STRPCCMD does not work on the first session connected with SSL after each reboot. This only happens with the V5R1 128-bit SSL (CE3) component of Client Access Express. Correction for APAR SE08032: ---------------------------- The process PATH environment variable is corrupted on the first SSL connection attempt and therefore could cause problems when trying to launch programs using STRPCCMD. This change will correct the PATH and allow program launches to complete successfully. Circumvention for APAR SE08032: ------------------------------- Modify your pc system wide PATH environment variable to include a single semi-colon at the very first character in the PATH. For example: PATH=c:\winnt\system32;... becomes PATH=;c:\winnt\system32;... APAR = SE08320 CA400EXP-CONNECTIONS-INCORROUT cwbcfg configs not changed; add /ipaddr modes When cwbcfg is run, even when /r is specified, not all existing user profiles are updated with the specified configuration information.  Users created after cwbcfg is run do get the configuration information, as desired. Also, the only IP Address setting possible using cwbcfg is to specify the IP Address explicitly, which implicitly sets the IP Address Lookup Frequency to Never. The other lookup frequencies cannot be set. This PTF fixes the reported problems. The /ipaddr parameter now can be used with any of the following: n.n.n.n If the actual IP address is specified in the format n.n.n.n, it will be set, and will never be looked-up. *ALWAYS The IP address will be looked-up every time a connection is attempted. *HOURLY The IP address will be looked-up only if an hour has passed since the last lookup. *DAILY The IP address will be looked-up only if a day has passed since the last lookup. *WEEKLY The IP address will be looked-up only if a week has passed since the last lookup. *STARTUP The IP address will be looked-up only if Windows has been shutdown and re-started since the last lookup. For example, the following command will not only set the default user ID of system MySys to Frank, it will also set the IP Address Lookup Frequency so the address is looked-up only if at least a day has passed since the last lookup. Because /r is used, it will modify even existing MySys configurations. cwbcfg /host MySys /ipaddr *DAILY /uid Frank /r EXPRESS OPTIONAL COMPONENTS --------------------------- DIRECTORY UPDATE ---------------- No fixes. INCOMING REMOTE COMMAND ----------------------- No fixes. MAPI ---- No fixes. EXPRESS ONLINE USER'S GUIDE --------------------------- No fixes. AS/400 OPERATIONS NAVIGATOR --------------------------- IMPORTANT: For Management Central users, there are two required PTFs that must be installed on an iSeries V5R1M0 server: 5722SS1 SI00721 5722SS1 SI00722 It is required that a Client Access Express user apply this service pack (SI06804) before trying to connect to the Management Central server on an iSeries on which the above mentioned PTFs are applied. If there is a mismatch, errors will occur. Additional requirements for your iSeries V5R1M0 server relating to Management Central are outlined in APAR SE02365 as well. If you already addressed this during the installation of SI01907, this action is not required for the installation of this service pack. APAR = SE02365 CA400EXP-OPNAV MGMT CENTRAL JAVA PORT REDUCTION/SSL This enhancement will allow you to turn on Secure Sockets Layer (SSL) for Management Central Job Monitors, Message Monitors, and System Values functions in V5R1M0. Prior to this service pack, these functions are disabled if you have the Management Central Properties set to use SSL. If you have installed this service pack and are intending to use Management Central, you will need to apply 5 co-requisite PTFs to your Central System and all endpoints. You must also install the service pack on any PCs you want to use Management Central from. If you don't apply these PTFs, you will not be able to connect to any V5R1M0 Management Central servers. (Connections to V4R5M0 or earlier will not be affected). The 5 PTFs are for the 5722SS1 product and their numbers are: SI01375 SI01376 SI01377 SI01378 SI01838 Additionally, if you would like to use SSL with Management Central, you must do some configuration with Application Administration. In Operations Navigator, under your local connections, run Application Administration for a system you are going to use SSL on. On the Host Applications tab, expand Digital Certificate Manager (DCM), then highlight System Certificate Store. Click on the Customize button. On the Customize Access window, expand All Users under the Users and Groups section. Select user QYPSJSVR, then add it to the Access Allowed section. Click OK on the Customize window, then click OK on the Application Administration window. Repeat this for every system you are going to use with SSL for Management Central, central system and endpoints. APAR = SE04565 CA400EXP-OPNAV-AUTHLIST-INCORROUT UNABLE TO SELECTAUTL ON NE Unable to select the desired authorization list for the newly created objects of a library following these steps: 1) Open OpNav 2) Select and open "Database" 3) Select and open "Libraries" 4) Right click with the mouse and select "Permission" 5) Select "New objects" then select "Use authorization list" 6) Choose an authorization list using the "Browse" button Regardless of the authorization list chosen, the one used is always the first one in the list. In other words, there is no way to select an authorization list other than the one at the top of the list. APAR = SE06093 OSP-AFP-PRT IMPORT OF OVERLAY ONLY WORKS FOR ENGLISH CA When using some non-English languages, the Import Overlay function of AFP Manager does not work. APAR = SE06804 CA400EXP-OPNAV-SECPOL-UNPRED ADD BUTTON DOES NOT SHOW UP Permissions (incorrectly) attempts to enable or disable buttons based on user's permissions to the object. If the user is not authorized to perform the operation, an error message should be presented at the time the operation is applied. Users who should be seeing ADD buttons because they are authorized are seeing the ADD button greyed out. The Permissions authority-checking code causing these buttons to be disabled was too restrictive and has been removed. Now, a user will be able to select the buttons at any time, but if he is not authorized, an error dialog box will inform him of that when he tries to apply the changes or click the OK button to exit Permissions. APAR = SE06899 CA400EXP-OPNAV-INCORROUT LPAR GUI MOVEMENT ERROR 110053 When a secondary partition has a min value of 0 for processor units and it's moved to another partition, it is not possible to move it back using the GUI interface. The result is, Error 110053 " Current processing units is greater than the maximum allowed ". This fixes a problem where the LPAR GUI was incorrectly setting the number of virtual processors when moving processing units between partitions. Without this fix, the only workaround for some LPAR configurations was to use DST/SST. APAR = SE06921 CA400EXP-BOOTP OPERATIONS NAVIGATOR LIMITS RANGE OF MAC ADDR When configuring BOOTP server thru Operations Navigator from CAExpress R510 and adding PC clients, the GUI interface limits the range of MAC addresses from 02:00:00:00:00:00 to 7F:FF:FF:FF:FF:FF, while AS/400 command CL interface from WRKBPTBL allows to enter different MAC addresses starting for example with "00". This range is not up to date since there are ethernet cards with mac address starting with "00" (IBM original Ethernet adapters too). Previous versions of CAExpress did not check the address range in the same way. APAR = SE06945 CA400EXP-OPNAV-FILESYS-INCORROUT Compile Java File Customer has a java source file located in a directory in the Root IFS. In Operations Navigator - File Systems - Integrated File System - Root drilling down to the directory where the source file is located, allows you to right mouse click on the source file and select the option to Compile Java File. The gui gives you the option to specify the JDK level and also a classpath. In this case the java source contains ToolBox JDBC code so added classpath '/QIBM/ProdData/HTTP/Public/jt400/lib/ jt400.jar'. This function fails with the following errors: /home/testSocket2.java:1: Package com.ibm.as400.data not found in import. import com.ibm.as400.data.*; /home/testSocket2.java:2: Package com.ibm.as400.access not found in import. import com.ibm.as400.access.*; 2 errors Circumvention for APAR SE06945: ------------------------------- Create the java program thru native OS/400 interface or QSH with javac. APAR = SE06986 OSP-AFP-PRT UNABLE TO USE IMPORT OVERLAY FUNCTION OF AFP MAN Unable to use Import overlay function of AFP Manager if user does not have a current library assigned and user attempts to import to the current library. Circumvention for APAR SE06986: ------------------------------- Assign a current library in the user's profile. APAR = SE07200 TCPIP-SMTP OP NAV FAILURE ATTEMPTING TO CHANGE/DISPLAY SMTP If the pop attribute for refresh interval is set to *none attempting to change or even display the smtp attributes with operations navigator will fail. The error message indicates 0 is an invalid value for ADRBOOK. Java SMTP properties did not handle 0 case for Refresh Interval, which is equivalent to *NONE. APAR = SE07405 OSP PROBLEM WITH LOADING OF USER LIST WHEN WORKING WITH THE When running R510 of Client Access and Windows 98 on the PC, there is a problem with the user list when giving permissions to files in the File System. When a user right clicks on Permission, then click on the ADD button to add a user, the user is added, but if user tries to add a second user the screen hangs. Sometimes the user list container appears blank. This APAR fixes the following problem: A user opens the Permissions dialog on some object in a v5r1 version of OpNav on a Windows 98 machine. When he clicks on the "Add" button to add a user, sometimes a blank dialog box pops up due to an exception when retrieving one of the lists of users. The list that caught the exception would then be empty. APAR = SE07618 OSP-MSGCPD0104-PAR-CA400EXP-OPNAV CANNOT ENROLL TO DOMAIN If the Windows Domain name contains a hyphen (-), then enrolling users to the Windows Domain using Operations Navigator will fail, issuing the following message: CPD0104 Expression not allowed for parameter WNTDMNLST. The CHGNWSUSRA command string was incorrectly built, which caused the command syntax to be incorrect. This problem has been fixed. APAR = SE07695 CA400EXP-OPNAV-NETWORK-INCORROUT UNABLE TO CLICK BETWEEN TAB After going into telnet properties( right clicking Telnet underneath Network-Servers-TCP/IP) and clicking on the General tab, you are unable to exit out of that tab itself. APAR = SE08031 CA400EXP-OPNAV-NETWORK-INCORROUT UNIVERSAL CONNECTION WIZARD Universal Connection Wizard fails to configure multiple systems one after another. Once you've used the wizard to configure one system, when you start it again on another server/partition, it fails at the line description window. It does not allow the default line description name QESPPLIN although there is no such line yet configured on this second server/partition. Steps to reproduce : - step 1. Delete the QESDIAL profile on both systems/partitions you want to configure. - step 2. Delete line description QESPPLIN on both systems/partitions you want to configure. - step 3. Start the wizard for the first system/partition (you will get a prompt for the line description, leave it to the default). - step 4. Start the wizard for the second system/partition. - step 5. An error will pop-up when you get to the window with the name for the line description (QESPPLIN) stating that this line is already configured. Circumvention for APAR SE08031: ------------------------------- Close and restart Operations Navigator. APAR = SE08329 CA400EXP-OPNAV-INCORROUT Numeric at start domain name User is unable to enter a domain name that starts with a numeric character. DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- No fixes. DATA TRANSFER EXCEL ADD-IN -------------------------- No fixes. ODBC ---- APAR = SE06802 CA400EXP-ODBC-INCORROUT RIGHT TRUNCATION ON CHAR DATA This problem was discovered while using Microsoft Access version 9 (Access 2000).  An attempt to update a character column which is larger than 255 characters fails if half of the total column size was inserted.  For example with a column defined as CHAR(300) one could insert 149 characters but not 150 or more.  This problem is related to the driver's handling of the SQLBindParameter API and how it handles SQL_C_WCHAR to SQL_CHAR conversions. APAR = SE07095 CA400EXP-ODBC-INCORROUT PROBLEM IS RELATED TO EMBEDDED NULLS Customer has a file with embedded nulls in a char field. With the "Allow unsupported character" option checked it still fails. APAR = SE07172 CA400EXP-ODBC-INCORROUT NULL OUTPUT PARAMETERS RETURNING Stored procedures that are returning null output parameters are returning invalid data if called with the Client Access ODBC driver. The driver is ignoring the null indicator sent with the data, and instead returning invalid values. For date values, this will be the current date. For numeric values, this will be 0. APAR = SE07497 CA400EXP-ODBC-INCORROUT STORED PROCEDURE EXPECTED TO RETURN On an ODBC connection, a stored procedure with output parameters which is expected to return 1 result set with 0 records instead returns no result set. A second issue which may occur involves a memory overwrite which can result in corrupted output parameters or program faults. This happens when a CHAR parameter is bound as a VARCHAR, and the value is incorrectly parsed. APAR = SE07922 CA400EXP-ODBC-INCORROUT UNABLE TO LINK TO SPECIFIC LIBRARY Since applying the V5R1 service pack, SI05361, customer cannot link to the specific library which has ASCII Yen X'5C' at the head of library name like 'YenJDASC2'. In the QZDASOINIT joblog, MSGSQL0204 F/QSQRUN1 T/QSQRUN1 is issued. OLE DB PROVIDER --------------- IMPORTANT: If you have the OLE DB component of Client Access Express installed on a Windows NT or Windows 2000 PC, and this is the first V5R1M0 service pack installed on this PC, you should make sure that an Administrator performs the initial reboot after the service pack install. The DLL self-registration that occurs during the reboot requires Administrator authority. In the event that this recommendation is not followed, you can self-register the DLL by running the following command: regsvr32 "C:\Program Files\IBM\Client Access\cwbzzodb.dll" (where the actual Client Access Express install directory is substituted into this command) APAR = SE08268 CA400EXP-OLEDB-INCORROUT SEEK FUNCTION USED WITH IBMDA400 OL Use of the integrated seek function of IBMDA400 Record Level Access is failing when using a multiple field key. For example, using a logical file that contains a key of (CHAR(36), Packed(6,0)) and using the seek method with a comparison operator of adSeekFirstEQ results in being positioned to the first record in the file. This happens if the key has a match in the file. The recordset should be positioned to the matching record. LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- APAR = SE07260 CA400EXP-OPNAV Viewer Process Fails to end when error occurs Integrity problem. APAR = SE08202 CA400EXP-AFPVIEWER ERROR OCCURS USING *VIEW FROM AFPU An error occurs when using AFPU to create or change an overlay. The error occurs when you put *VIEW in the Control field of the Design Overlay screen and press enter. The AFP Workbench Viewer, is invoked and error "1314: Unable to open file" is displayed. APAR = SE08191 CA400EXP-AFPVIEWER-LOOP OR HANG VIEWING SPOOLED FILE Occasionally, the first time a user tries to view a spooled file with the AFP Viewer through Operations Navigator, the AFP Viewer doesn't open and won't respond. AS/400 JAVA TOOLBOX ------------------- This Client Access Express service pack will also install the equivalent of 5722JC1 product PTF SI04995. Please refer to the cover letter for fix details. 5250 Display and Printer Emulation ---------------------------------- APAR = SE06873 OSP-PAR PCSWS IPF IN MODULE UNKNOWN WHEN STARTING RUNNING VB PCSWS.exe Invalid Page Fault in module unknown. When starting or running VB script macro. APAR = SE07671 CA400EXP-TERMEMUL-INCORROUT UNABLE TO USE SYSREQ ON PC5250 Unable to use Sysreq on PC5250 session running an interactive looping java program. Recreation Steps : Run the following java class: ************** Datenanfang **************** import java.io.*; public class loop public static void main(String args ) throws Exception int i; for (i=1;i<16777216;i++) System.out.print(i); System.out.println(": I'm still running"); When the program is running, try to use the sysreq function : PC5250 session will hang. APAR = SE07743 CA400EXP-TERMEMUL-INCORROUT PC5250 HANGS WHEN USING SYSREQ PC5250 hangs when using Sysreq Opt.2 on an interactive java looping program. Recreation Steps : Run the following java class: ************** Datenanfang **************** import java.io.*; public class loop public static void main(String args ) throws Exception int i; for (i=1;i<16777216;i++) System.out.print(i); System.out.println(": I'm still running"); When the program is running, get the sysreq line and hit 2 (end the job). PC5250 session will hang. APAR = SE07771 CA400EXP-PRINTEMUL-MSGPCSWS.EXE ERROR INTEGER DIVISION BY 0 Configuring a printer session with the best fit option checked, and then checking the use PDT option under printer setup, causes a PCSWS.exe error that states the exception is "Integer division by zero". APAR = SE07847 CA400EXP-TERMEMUL-INCORROUT NO ALARM ON ICF CLIENTS WHEN When using PC5250 in a Terminal Services environment, ICF or RDP clients do not produce audio alarms when receiving break messages or when displaying a DSPF with the ALARM keyword. This problem started after installing service pack SI05361. APAR = SE08022 CA400EXP-TERMEMUL-INCORROUT CURSOR DOES NOT POSITION PROPERL With certain fields in PC5250, after hitting Enter, the cursor should return to the beginning of the field. After applying SI05361, the cursor remains at its last position. APAR = SE08139 CA400EXP-PRINTEMUL-MSGPCSWS PAGE FAULT WINDOWS 2K DESKJET WINDOWS 2000 DESKJET PRINTER DRIVERS CAUSE PC5250 PRINTER SESSIONS TO RETURN PCSWS_EXE PAGE FAULT ERROR When using new Deskjet printer drivers. PC5250 print sessions fail with PCSWS.EXE page fault errors. APAR = SE08283 OSP-PAR V5R2M0 C2260 5722XE1 WITH PTF SI05853 ON MS WINDOWS Protection Fault exception code 0xc0000005 occurs when you access the display session printer setup, driver setup. APAR = SE08322 CA400EXP INCORECT FONTS FOR VIETNAMESE CAPS 5250 DISP EMU Vietnamese Capital fonts not correct : combination of keyed 1,2,3,4 with 8 will display as combination of key 1,2,3,4 with 5 in some font sizes. (ex 11x20) related PMR is 00070, B000, C852 APAR = SE08323 CA400EXP-PRINTEMUL-UNPRED PC5250 IS RESTORING DEFAULT PAGE After saving settings under file and page setup, PC5250 does not print the same the next time the PC5250 printer session is opened. PRINTER DRIVERS --------------- AFP PRINT DRIVER ---------------- No fixes. SCS PRINT DRIVER ---------------- No fixes. AS/400 OPERATIONS CONSOLE ------------------------- No fixes. CLIENT ACCESS EXPRESS TOOLKIT ----------------------------- HEADER, LIBRARY, AND DOCUMENTATION ---------------------------------- No fixes. VISUAL BASIC WIZARDS -------------------- No fixes. TOOLS FOR JAVA -------------- No fixes. EZ-SETUP WIZARD --------------- No fixes. --------------------------------- Service Pack Level = SI05361 Build date = July 2002 --------------------------------- EXPRESS REQUIRED PROGRAMS ------------------------- APAR = SE04044 CA400EXP-SSL-INCORROUT MSGCWBCO1034 RC25426 ON PC5250 FIRST APAR = SE04241 CA400EXP 2 MSGCWBLMSRV SHUTDOWN HANGS WITH CWBLMSRV MESSAGE APAR = SE05333 OSP-INCORROUT UNABLE TO USE DBCS SPECIFIC CHARACTER ON MS AC APAR = SE06009 CA400EXP-OLEDB-INCORROUT IBMDA400 MIXES DATA IN BIDI APAR = SE06195 INCORROUT UNABLE TO USE THREE THAI CHARACTERS WITH MS ACCESS APAR = SE06839 CA400EXP-OLEDB-MSGCWBDB0052 OLEDB APP CANNOT FIND CONVERSION TBL APAR = SE06863 OSP-PAR CLIENT ACCESS LICENSING FAILS WHEN FRAME SIZES ARE V EXPRESS OPTIONAL COMPONENTS --------------------------- DIRECTORY UPDATE ---------------- No fixes. INCOMING REMOTE COMMAND ----------------------- No fixes. MAPI ---- No fixes. EXPRESS ONLINE USER'S GUIDE --------------------------- No fixes. AS/400 OPERATIONS NAVIGATOR --------------------------- APAR = SE03464 CA400EXP-OPNAV COLLECTION SERVICE REPORTS WRONG PARAMETERS I APAR = SE04653 CA400EXP-OPNAV-INCORROUT AUTHORITY ERROR CONFIGURING NETSERV APAR = SE05472 CA400EXP-OPNAV VISUAL EXPLAIN PANEL IS NOT SHOWN WHEN USING APAR = SE05531 CA400EXP-OPNAV-INCORROUT MOVE CPU RESOURCES HANGS OPERATIONS APAR = SE06861 OSP-PAR CLIENT ACCESS V450 OPERATIONS NAVIGATOR FATAL EXCEPT Non-APAR fix = CA400EXP-OPNAV-NETWORK-INCORROUT Servers linked to disk DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR = SE04511 CA400EXP-DTRANSFER-UNPRED UPLOADING BIFF8 FAILS APAR = SE04637 CA400EXP-DTRANSFER MSG "INVALID DATA PATH" WITH BIFF5 APAR = SE06350 CA400EXP-DTRANSFER-INCORROUT ASCII TEXT WITH ZERO PAD DATA TRANSFER EXCEL ADD-IN -------------------------- APAR = SE04596 CA400EXP-DTRANSFER-UNPRED EXCEL GPFS WHEN USING THE ADD-IN ODBC ---- APAR = SE03767 CA400EXP-ODBC-MSGSQL0107 POWERBUILDER APPLICATION USING V5R1 APAR = SE04020 CA400EXP-ODBC-INCORROUT NEGATIVE NUMBERS INSERTED AS POSITIV APAR = SE04119 CA400EXP-ODBC-INCORROUT AUTOCOMMIT ON DOESN'T CHANGE THE APAR = SE04230 CA400EXP-ODBC-UNPRED MEMORY LEAK ASSOCIATED WITH ENVIRONMENT APAR = SE04467 CA400EXP-ODBC-INCORROUT DATA TRUNCATION ERROR WITH POWERBUIL APAR = SE04540 CA400EXP-ODBC-INCORROUT ODBC RETURNS NULL IF LOB THRESHOLD I APAR = SE04592 CA400EXP-ODBC-MSGSQL0104 ODBC FUNCTIONS WITH MORE THAN ONE APAR = SE04649 CA400EXP-ODBC-INCORROUT VIEWING TABLE WITH OP NAV INCORRECTL APAR = SE04726 CA400EXP-ODBC-INCORROUT SP WITH CHAR IN/OUT PARM DOES NOT APAR = SE04900 CA400EXP-ODBC-INCORROUT DBCLOB DATA WRITTEN INCORRECTLY APAR = SE04915 OSP-PAR ODBC POOR PERFORMANCE APAR = SE05199 CA400EXP-ODBC-WAIT JDE ONEWORLD APPLICATION APPEARS TO HANG APAR = SE06149 CA400EXP-ODBC-INCORROUT INVALID LENGTH REPORTED ON CATALOG APAR = SE06297 CA400EXP-ODBC-PERFM PARAMETER MARKER DESCRIPTION APAR = SE06414 CA400EXP-ODBC-MSGSQL0181 AND MSGCPF5035 RC18 ON ODBC TIMESTA APAR = SE06447 CA400EXP-ODBC-INCORROUT - ODBC FAILS TO RETURN FULL STORED P APAR = SE06546 CA400EXP-ODBC-MSGCWB0111 CHARACTER DATA RIGHT TRUNCATION WIT APAR = SE06714 CA400EXP-ODBC-INCORROUT OLE DB PROVIDER --------------- APAR = SE04281 CA400EXP-OLEDB-INCORROUT RUNTIME ERROR -2147217887 on OpenIndex APAR = SE06083 CA400EXP-OLEDB-INCORROUT NUMBER OF ROWS AFFECTED IS INCORRECT APAR = SE06106 CA400EXP-OLEDB-INCORROUT SINGLE PRECISION DEC INCORRECTLY INSERTED APAR = SE06469 CA400EXP-OLEDB-INCORROUT IBMDA400 RETURNS EMPTY RESULT SET F APAR = SE06588 CA400EXP-OLEDB-UNPRED EXECUTING A PREPARED CALL STATEMENT LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- APAR = SE05031 CA400EXP-AFPVIEWER CWBNP1019 AFP RESOURCE NOT FOUND ON SYSTEM AS/400 JAVA TOOLBOX ------------------- This Client Access Express service pack will also install the equivalent of 5722JC1 product PTF SI?????. Please refer to the cover letter for fix details. 5250 Display and Printer Emulation ---------------------------------- APAR = SE03871 OSP-INCORROUT CUT AND PASTE INTO SEU OR EDTTXT OR DDS DISPLA APAR = SE03895 CA400EXP-TERMEMUL-INCORROUT ALARM DOES NOT SOUND WHEN USING APAR = SE03962 CA400EXP-DBCS PRINTED AS GARBAGE BY PRINTER SESSION APAR = SE03929 CA400EXP-TERMEMUL-INCORROUT DIACRITIC CHARACTERS PROBLEMS WI APAR = SE04033 CA400EXP-TERMEMUL-INCORROUT WRONG KBDTYPE AND CHRID USING 1112 APAR = SE04096 CA400EXP PCSWS PAGE FAULT WHEN CLOSE A 5250 SESSION APAR = SE04154 CA400EXP-TERMEMUL-INCORROUT WRONG KBDTYPE AND CHRID USING 1122 APAR = SE04192 CA400EXP-SECURITY-MSG656 UNABLE TO CONNECT PC5250 WHEN PASSW APAR = SE04551 CA400EXP-TERMEMUL FIELDS IN RPG APPLICATION GETS TRUNCATED S APAR = SE04835 CA400EXP-TERMEMUL-INCORROUT EMBEDDED SESSION DOES NOT RESIZE APAR = SE04867 CA400EXP-TERMEMUL-UNPRED MISSING FILES FOR HACL CLASS LIBRAR APAR = SE05133 CA400EXP-TERMEMUL-INCORROUT PC5250 CONFIGURATION USING 1157 APAR = SE05152 CA400EXP-TERMEMUL-INCORROUT BLANKS ARE REMOVED FROM ENTRY FI APAR = SE05160 CA400EXP-TERMEMUL-INCORROUT PROBLEM WITH CONTINUOUS FILED EN APAR = SE05180 CA400EXP-TERMEMUL PCSCM.EXE-APPLICATION ERROR. THE INSTRUCTI APAR = SE06164 CA400EXP-TERMEMUL-MSGMCH0601 CSRINPONLY SPECIFIED IN DSPF APAR = SE06296 OSP-PAR PC5250 PROCESSING OF FIELD WITH WORD WRAP AFTER SI02 APAR = SE06586 CA400EXP-TERMEMUL-LOOP WHEN USING IWMP2000 TO SCAN DOCUMENTS APAR = SE06719 CA400EXP-PC5250-INCORROUT VIETNAMESE 5250 DISPLAY EMULN APAR = SE06866 CA400EXP-TERMEMUL-MSGPCSCC006 WITH HOST CODEPAGE 924 OR 1148 APAR = SE06867 CA400EXP-PC5250 INCORROUT MSGPCSCC007 FOR INVALID CODE PAGE APAR = SE06869 CA400EXP-TERMEMUL-INCORROUT SESSION HANGS ON EXIT IF CHANGES APAR = SE06870 CA400EXP-TERMEMUL-INCORROUT WRONG CURSOR POSITION IN A PC525 APAR = SE06871 CA400EXP-TERMEMUL-INCORROUT UNABLE TO SPECIFY A SECURE WEBSI PRINTER DRIVERS --------------- AFP PRINT DRIVER ---------------- APAR = SE05172 CA400EXP 2 UNPRED CANCELED FAX IS STILL SENT SCS PRINT DRIVER ---------------- No fixes. AS/400 OPERATIONS CONSOLE ------------------------- No fixes. CLIENT ACCESS EXPRESS TOOLKIT ----------------------------- HEADER, LIBRARY, AND DOCUMENTATION ---------------------------------- No fixes. VISUAL BASIC WIZARDS -------------------- No fixes. TOOLS FOR JAVA -------------- No fixes. EZ-SETUP WIZARD --------------- No fixes. --------------------------------- Service Pack Level = SI02795 Build date = February 2002 --------------------------------- EXPRESS REQUIRED PROGRAMS ------------------------- APAR = SE03045 OSP-PAR CLIENT ACCESS WITH V5R1 AND SI01907 HAS SHUTDOWN APAR = SE03411 OSP-PAR CWBLM0011 ERROR GIVEN ON FIRST LICENSE USAGE AFTER APAR = SE03520 CA400EXP-SECURITY-MSGCWBSY0011 PASSWORDS STARTING WITH A APAR = SE03552 OSP-MSGCWB0111 BINDING A ZERO LENGTH STRING AS A SQL_C_WCHAR APAR = SE03810 CA400EXP-OPNAV-INCORROUT WRONG HEBREW TRANSLATION IN IFS APAR = SE03811 CA400EXP-CONNECTIONS-INCORROUT CWBCFG FAILS, MUST BE ADMIN APAR = SE03812 CA400EXP-CONNECTIONS-INCORROUT CWBCFG SET IP ADDRESS LOOKUP APAR = SE03830 CA400WINOPT IBMDA400 PARAMETER BIDI TRANSFORM IGNORED APAR = SE03863 CA400WINOPT - ARABIC TRANSLATION LAM-ALEF CHARACTER NOT GET EXPRESS OPTIONAL COMPONENTS --------------------------- DIRECTORY UPDATE ---------------- No fixes. INCOMING REMOTE COMMAND ----------------------- APAR = SE02529 CA400EXP-INRMTCMD-INCORROUT RUNRMTCMD BAD SPECIAL CHARACTERS MAPI ---- No fixes. EXPRESS ONLINE USER'S GUIDE --------------------------- No fixes. AS/400 OPERATIONS NAVIGATOR --------------------------- APAR = SE02797 CA400EXP-OPNAV-PERFM CLICKING ON BY LOCATION UNDER HARDWARE APAR = SE03288 CA400EXP-OPNAV-FILESYS-INCORROUT NOT ABLE TO EXPAND A APAR = SE03836 OSP-MSGCPD0020 MSGCPD0014 SETTING PERMISSIONS VIA OPNAV APAR = SE04017 CA400EXP-OPNAV FIX MC REGISTRY WRAPPER CLASS ON WIN XP APAR = SE04016 CA400EXP-OPNAV PACKET RULES DON'T LOAD ON CORRECT LINENAME APAR = SE04018 CA400EXP-OPNAV SMTP PROPERTY PAGE FIXES APAR = SE04019 CA400EXP-OPNAV PPP VALIDATION LIST 99 ENTRY LIMIT DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR = SE02766 CA400EXP-DTRANSFER-MSGSQL0010 DATA TRANSFER WHERE CLAUSE APAR = SE02833 CA400EXP-DTRANSFER-INCORROUT DATA TRANSFER UPLOAD WITH ASCII APAR = SE03076 CA400EXP-DTRANSFER-MSGCWBTF0008 CREATE WIZARD LOSES EXPONENT APAR = SE03267 CA400EXP-DTRANSFER-INCORROUT LEADING ZEROS ARE NOT HANDLED APAR = SE03580 CA400EXP-DTRANSFER-INCORROUT DBCS CELLS INCORRECT IN BIFF8 DATA TRANSFER EXCEL ADD-IN -------------------------- APAR = SE02898 CA400EXP CWBTF0084 EXCEL 97 ADD-IN FAILS AFTER SI01907 APAR = SE03439 CA400EXP-DTRANSFER-INCORROUT EXCEL XP DATAXFER ADD-IN STOPS APAR = SE03567 CA400EXP-DTRANSFER-INCORROUT ADDIN FAILS TO UPLOAD JAPANESE APAR = SE03595 CA400EXP-DTRANSFER-INCORROUT 5722XE1 DATA TRANSFER EXCEL ADD ODBC ---- APAR = SE02678 CA400EXP-ODBC-MSGSQL0180 TIMESTAMP ESCAPE SEQUENCE CONVERTED APAR = SE02794 CA400EXP-ODBC-INCORROUT CREATE DSN USING LOWER LETTER FOR APAR = SE02802 CA400EXP-ODBC-UNPRED FAILOVER FAILURE WITH CA EXPRESS V5R1 APAR = SE02837 CA400EXP-ODBC-MSG3265 SQLPROCEDURECOLUMNS, DRDA, OTHER FIXES APAR = SE03121 CA400EXP-ODBC-INCORROUT TRANSACTION ISOLATION LEVEL SET APAR = SE03217 CA400EXP-ODBC-LOOP LOOP APPENDING ROWS USING ODBC APAR = SE03270 CA400EXP-ODBC-INCORROUT GRAPHIC TYPE DATA IS NOT HANDLED APAR = SE03278 CA400EXP-ODBC STORE PROCEDURE CALLED VIA ODBC IS NOT RETURNI APAR = SE03352 CA400EXP-ODBC-INCORROUT SQLCOLATTRIBUTES FOR SQL_DESC_COUNT APAR = SE03389 CA400EXP-ODBC-INCORROUT SQLEXTENDEDFETCH AND SQLFETCHSCROLL APAR = SE03417 CA400EXP-ODBC-INCORROUT COLUMNWISE BINDING USED IN CONJUNCTI APAR = SE03561 CA400EXP-ODBC-UNPRED MS VB RDO APP. REPORTS DIAG³S1003Û APAR = SE03704 CA400EXP-ODBC-INCORROUT THE ODBC DRIVER IS ALWAYS REPORTING APAR = SA93212 CA400EXP-ODBC-INCORROUT SQL_MAX_LENGTH SQLSETSTMTOPTION APAR = SE03813 CA400EXP-ODBC-INCORROUT GRAPHIC TYPE DATA IS TRUNCATED WHEN APAR = SE03814 CA400EXP-ODBC-PERFM - PERFORMANCE WITH SCROLLABLE CURSORS APAR = SE03815 CA400EXP-ODBC-INCORROUT - BLOCK INSERT PROBLEMS APAR = SE03816 OSP-DB-INCORROUT CORRUPT DATA WITH LOCAL PACKAGE CACHE APAR = SE03817 CA400EXP-ODBC-INCORROUT CRASH WHEN BIND_OFFSET_PTR SET OLE DB PROVIDER --------------- APAR = SE03328 CA400EXP-OLEDB-INCORROUT ERRORS WITH OLEDB AND SQL SERVER APAR = SE03505 CA400EXP-OLEDB-MSGCWBZZ5014 ASCII TO ZONED CONVERSION, VALUE APAR = SE03818 CA400EXP-DBACCESS-OLEDB-MSGCWBZZ5014 DATA CONVERSION ERROR LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- APAR = SE03821 QIWA-PRINT-INCORROUT OP NAV SPOOLED FILE VIEWING FORM DEFS AS/400 JAVA TOOLBOX ------------------- This Client Access Express service pack will also install the equivalent of 5722JC1 product PTF SI02679. Please refer to the cover letter for fix details. 5250 Display and Printer Emulation ---------------------------------- APAR = SE02217 CA400EXP PC5250 IME_AUTO_START_Y FUNCTION INCORROUT APAR = SE02462 CA400EXP-PRINTEMUL-UNPRED MANUFACTURERTYPE IN PC5250 PRINTER APAR = SE02687 OSP-INCORROUT CUT AND PASTE INTO SEU OR EDTTXT FROM CA400EXP APAR = SE02752 CA400EXP-PC5250 WIN2K PREFORMANCE DEGRADATION ON WS DURING APAR = SE02851 OSP-PAR HOTSPOTS SETTING ARE NOT RETAINED WHEN MULTIPLE APAR = SE02852 CA400EXP-PC5250 PROBLEMS WITH MULTI LINE PASTE APAR = SE02901 CA400EXP-TERMEMUL-INCORROUT AFTER INSTALLING SI01907, CURSO APAR = SE03448 CA400EXP-TERMEMUL-PERFM PC5250 SLOW REFRESH SINCE 3D BUTTONS APAR = SE03566 CA400EXP PC5250 INVALID FONT IMAGE APAR = SE03671 CA400EXP-TERMEMUL DDS ATTRIBUTE PROTECT DOES NOT WORK IF APAR = SE03686 OSP-PAR COPY AND PASTE FROM PC5250 TO EXCEL/123 WITH TRAILIN APAR = SE03698 CA400EXP-TERMEMUL-UNPRED USING TAB KEY HANGS SESSION APAR = SE03708 CA400EXP-TERMEMUL-INCORROUT SETTING LETTER GOTHIC BOLD FONT APAR = SE03709 CA400EXP-TERMEMUL INCORROUT DANISH NATIVE CHARS CANNOT APAR = SE03719 CA400EXP-TERMEMUL-INCORROUT STRPCO AND STRPCCMD FAIL TO APAR = SE03720 CA400EXP-PC5250 INCORRECT IME CONVERSION APAR = SE03744 CA400EXP-TERMEMUL-INCORROUT COPY AND PASTE FUNCTION FAILS IF APAR = SE03747 CA400WINOPT-TERMEMUL-INCORROUT VB SCRIPT MACRO TIMEOUT APAR = SE03795 CA400EXP-TERMEMUL-INCORROUT AUTO SIGNON DOES NOT WORK PROPER APAR = SE03822 CA400EXP-TERMEMUL-INCORROUT PC5250 SCROLLBAR DOESN'T WORK AS APAR = SE03823 CA400EXP-TERMEMUL-INCORROUT PC5250 SCROLL BAR NOT DRAGABLE APAR = SE03824 CA400EXP-TERMEMUL-PERFM MACRO FAILS TO PAUSE WHEN IT REACHES APAR = SE03825 OSP-PAR NEW WINDOWS 2000 DESKJET PRINTER DRIVERS CAUSE PC525 PRINTER DRIVERS --------------- AFP PRINT DRIVER ---------------- APAR = SE03819 CA400EXP-INCORROUT FAX PRINTER DRIVER COVER PAGE TEXT APAR = SE03820 QIWA ERROR INSTALLING PRINTERS ON WINDOWS XP SCS PRINT DRIVER ---------------- See APAR SE03820 under AFP PRINT DRIVER section. AS/400 OPERATIONS CONSOLE ------------------------- APAR = SE03192 CA400EXP-OPCON RAS CONNECTION FAILS AFTER SI01907 IS APPLIED APAR = SE03969 CA400EXP-OPCON-INCORROUT LAN REMOTE CONTROL PANEL POINTS AT WRONG PARTITION CLIENT ACCESS EXPRESS TOOLKIT ----------------------------- HEADER, LIBRARY, AND DOCUMENTATION ---------------------------------- No fixes. VISUAL BASIC WIZARDS -------------------- No fixes. TOOLS FOR JAVA -------------- No fixes. EZ-SETUP WIZARD --------------- No fixes. --------------------------------- Service Pack Level = SI01907 Build date = August 2001 --------------------------------- EXPRESS REQUIRED PROGRAMS ------------------------- APAR = SE01670 CA400EXP-CONNECTIONS-MSGCWBLM0011 CWBLM0011 INTERNAL LICENCE APAR = SE01897 CA400EXP-MIGRATION-UNPRED AFTER MIGRATION TO CLIENT ACCESS 5 APAR = SE02319 CA400EXP-TERMEMUL PERSONAL COMMUNICATIONS V4.3 NOT STARTING APAR = SE02320 CA400EXP-TERMEMUL-INCORROUT PCOM 5.0 START/CFG FAILURES EXPRESS OPTIONAL COMPONENTS --------------------------- DIRECTORY UPDATE ---------------- No fixes. INCOMING REMOTE COMMAND ----------------------- No fixes. MAPI ---- No fixes. EXPRESS ONLINE USER'S GUIDE --------------------------- No fixes. AS/400 OPERATIONS NAVIGATOR --------------------------- APAR = SE02363 CA400EXP-OPNAV - VISUALBASIC PLUGINS FAIL APAR = SE02364 CA400EXP-OPNAV L2TP AND IGN DIAL WIZARD UPDATES APAR = SE02365 CA400EXP-OPNAV MGMT CENTRAL JAVA PORT REDUCTION/SSL DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- No fixes. DATA TRANSFER EXCEL ADD-IN -------------------------- APAR = SE02321 CA400EXP-DTRANSFER EXCEL XP UPLOAD NOT SUPPORTED ODBC ---- APAR = SE01815 CA400EXP-ODBC-INCORROUT LIBRARY LISTS FOR EXISTING DATA SOUR APAR = SE01894 OSP-MSGPWS0006-PAR ODBC - APPLICATION REQUEST FOR STATIC CUR APAR = SE02158 CA400EXP-ODBC-INCORROUT INVALID TABLE TYPE ON CATALOG REQUES APAR = SE02205 CA400EXP-ODBC-INCORROUT - NUMERIC COLATTRIBUTE UPDATE LENGTH APAR = SE02322 CA400EXP-ODBC FAILURE ON PROCEDURE CALL WITH PARAMETER NAMES APAR = SE02323 CA400WINOPT-ODBC-INCORROUT LOCKED RECORD INDICATES EOF WITH APAR = SE02324 CA400EXP-ODBC-INCORROUT - NUMERIC CONVERSION PROBLEMS APAR = SE02325 CA400EXP-ODBC-INCORROUT PROBLEMS WITH ERROR HANDLING APAR = SE02326 CA400EXP-ODBC-INCORROUT PROBLEMS WITH SQL STMT PARSING APAR = SE02327 CA400EXP-INSTALL-INCORROUT - CONCURRENCY SETTING NOT HONORED APAR = SE02328 CA400EXP-ODBC-INCORROUT - MISCELLANEOUS ODBC PROBLEMS APAR = SE02329 CA400EXP-ODBC-UNPRED - OPTION TO RETURN DB2-DEFINED SQLSTATE APAR = SE02330 CA400EXP-ODBC-INCORROUT - SQLGETDATA PROBLEMS APAR = SE02331 CA400EXP-ODBC ERROR IN SQLPARAMDATA APAR = SE02332 CA400EXP-ODBC-UNPRED - USABILITY ENHANCEMENTS APAR = SE02333 CA400EXP-ODBC-INCORROUT - BLOCK FETCH ISSUES APAR = SE02334 CA400EXP-ODBC-INCORROUT - ERROR ON PREPARE OF DRDA & DECLARE APAR = SE02335 CA400EXP-ODBC LAST BLOCK FETCH FOR CATALOG RETURN SWI OLE DB PROVIDER --------------- APAR = SE02336 CA400EXP-OLEDB-UNPRED CHANGE REGISTRY ENTRIES FOR TRACE/LOG LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. AS/400 JAVA TOOLBOX ------------------- This Client Access Express Service Pack will also install the equivalent of 5722JC1 product PTF SI02679. Please refer to the cover letter for fix details. 5250 Display and Printer Emulation ---------------------------------- APAR = SE02343 CA400WINOPT - PC5250 CURSOR POSITIONING PROBLEM APAR = SE02344 CA400WINOPT - FIELD EXIT ON A MANDATORY FILL SIGNED NUMERIC APAR = SE02345 CA400EXP-TERMEMUL-INCORROUT PC5250 VB SCRIPT MACROS RUNNING APAR = SE02346 CA400EXP-TERMEMUL-PC5250 STRPCO COMMAND CAUSES HANG APAR = SE02350 CA400EXP-PC5250 TELNET PRINTER SESSION INCORROUT APAR = SE02351 CA400EXP-CREATE MULTIPLE SESSIONS GIVES PAGE FAULT APAR = SE02352 CA400EXP -PAGE SETUP GREYED OUT AFTER PRINT SCREEN APAR = SE02353 DBCS HPT FOR SESSION TYPE APAR = SE02354 CA400EXP-TERMEMUL-UNPRED PC5250 CURSOR JUMPS TO WRONG POSITI APAR = SE02355 CA400EXP-TERMEMUL-INCORROUT USING END OF FIELD KEY IN SOME O APAR = SE02356 PC5250-PRT-INCORROUT TRAY SELECTION DOES NOT WORK APAR = SE02357 CA400EXP - PC5250 PRESSING TAB KEY IN DBU HANGS SESSION APAR = SE02358 CA400EXP-TERMEMUL-INCORROUT PC5250 SESSIONS HANG WITH F10 APAR = SE02359 CA400EXP - WORDWRAP ON EMULATOR FAILS TO REMOVE NULLS OR APAR = SE02360 CA400EXP-TERMEMUL-INCORROUT PC5250 CURSOR POSITIONING DOESN' APAR = SE02361 CA400EXP - PC5250 PAGE FAULT MESSAGE WITH SF65706 APPLIED APAR = SE02387 CA400EXP-TERMEMUL-INCORROUT PC5250 BELGIAN DUTCH (2963) TOOL PRINTER DRIVERS --------------- AFP PRINT DRIVER ---------------- No fixes. SCS PRINT DRIVER ---------------- APAR = SE02338 CA400EXP- UNPRED SCS PRINTER DRIVER HANGS WINNT WIN2000 APAR = SE02339 CA400EXP-INCORROUT SCS FONT CHANGES ON D/T423 AS/400 OPERATIONS CONSOLE ------------------------- APAR = SE02340 CA400EXP-OPCON-INCORROUT RCP CONNECTION FAILS TO CONNECT TO APAR = SE02341 CA400EXP-OPCON -MSGACCESS WAS DENIED BECAUSE THE USERNAME/AN APAR = SE02342 CA400EXP-OPCON-MSGCPF5140 OPERATIONS CONSOLE RANDOMLY DROPS CLIENT ACCESS EXPRESS TOOLKIT ----------------------------- HEADER, LIBRARY, AND DOCUMENTATION ---------------------------------- No fixes. VISUAL BASIC WIZARDS -------------------- No fixes. TOOLS FOR JAVA -------------- No fixes. EZ-SETUP WIZARD --------------- APAR = SE02362 CA400EXP-OPNAV LANGUAGE MISMATCH IN DOMINO EZ SETUP WIZARD --------------------------------- Service Pack Level = SI01037 Build date = May 2001 --------------------------------- EXPRESS REQUIRED PROGRAMS ------------------------- APAR = SE01206 CA400EXP-CONNECTIONS-INCORROUT CLIENT ACCESS EXPRESS CWBCFG APAR = SE01207 CA400EXP-UPDATE DIRECTORY UPDATE FAILS WHEN A DBCS FILE NAME APAR = SE01236 CA400EXP-OPNAV-HWINV-INCORROUT DISK UNITS NOT SHOWN EXPRESS OPTIONAL COMPONENTS --------------------------- DIRECTORY UPDATE ---------------- No fixes. INCOMING REMOTE COMMAND ----------------------- No fixes. MAPI ---- No fixes. EXPRESS ONLINE USER'S GUIDE --------------------------- No fixes. AS/400 OPERATIONS NAVIGATOR --------------------------- APAR = SE01235 CA400EXP-OPNAV-FILESYS-UNPRED NEW JAVA PROGRAM LABEL GONE DATA ACCESS ----------- DATA TRANSFER ------------- DATA TRANSFER BASE SUPPORT -------------------------- APAR = SE01208 CA400EXP-DTRANSFER V4R4/R5 DTF GIVES INCORRECT FILE OPTIONS DATA TRANSFER EXCEL ADD-IN -------------------------- Non-APAR fixes. ODBC ---- APAR = SE01237 CA400EXP-ODBC-MSGSQL0106 FAILURE WHEN CREATING A TABLE APAR = SE01238 CA400EXP-ODBC INVALID VALUE RETURNED FOR FLOAT DATA TYPES APAR = SE01239 CA400EXP-ODBC ADDITIONAL OPTION TO DISABLE PROMPTING APAR = SE01240 CA400EXP-ODBC-INCORROUT WRONG SQLSTATE VALUE RETURNED OLE DB PROVIDER --------------- APAR = SE01241 CA400EXP-OLEDB-INCORROUT SUPPORT FOR MULTIPLE RESULT SETS APAR = SE01243 CA400EXP-OLEDB-INCORROUT FREE THREADING LOTUS 123 FILE FORMAT SUPPORT ----------------------------- No fixes. AFP WORKBENCH VIEWER -------------------- No fixes. AS/400 JAVA TOOLBOX ------------------- This Client Access Express Service Pack will also install the equivalent of 5722JC1 product PTF SI00131. 5250 Display and Printer Emulation ---------------------------------- This Service Pack includes PCOM5.0 CSD1 plus additional fixes. APAR = SE01205 CA400EXP-OPNAV-INCORROUT DISPLAY EMULATOR (PC5250) VIA OPNAV PRINTER DRIVERS --------------- AFP PRINT DRIVER ---------------- No fixes. SCS PRINT DRIVER ---------------- No fixes. AS/400 OPERATIONS CONSOLE ------------------------- APAR = SE01244 CA400EXP-OPCON OPERATIONS CONSOLE LAN CONNECTION CLIENT ACCESS EXPRESS TOOLKIT ----------------------------- HEADER, LIBRARY, AND DOCUMENTATION ---------------------------------- No fixes. VISUAL BASIC WIZARDS -------------------- APAR = SE01242 CA400EXP-OLEDB-INCORROUT VB WIZARD GENERATES INCORRECT CODE TOOLS FOR JAVA -------------- No fixes. EZ-SETUP WIZARD --------------- Non-APAR fixes. 4.0 INSTALL/UNINSTALL CONSIDERATIONS ------------------------------------- The following sections describe additional support and known problems that you may notice while using the Install/Uninstall function. 4.1 REMOVING THE SERVICE PACK ------------------------------ To remove this service pack from your PC: 1. Click the Windows Start button, click on Settings, and then click on Control Panel. 2. Double-click on the Add/Remove Programs icon. 3. Click on the Install/Uninstall tab, click on IBM AS/400 Client Access Express for Windows SIxxxxx item, and then click on the Add/Remove button. 4. Follow the instructions on the screen. 4.2 UNABLE TO INSTALL FROM THE SERVICE SOURCE? ----------------------------------------------- InstallShield is the tool used to provide the install support for Client Access Express for Windows. The same tool is used for installing service packs. Setup.exe has a 2 minute timeout which could expire when installing service packs over slower communication lines. The suggested way of installing the service pack in this case is to take one of the options below: 1) A setting has been added to the Client Access Express Properties Service tab that will copy the service pack image to the PC's temporary directory, install the service pack, then remove the copied files. To use this support you will need to specify this setting ("Copy install image to PC before installing"). STATUS: No status information is displayed while the files are copied. To determine if the transfers are progressing, look in the 'CA400CKV' temporary directory (For example C:\Windows\Temp\CA400CKV). You should see new files appear periodically. NOTES: "Copy install image to PC before installing" also works for upgrades to a new release, to avoid the time out over slower communication lines. 4.3 SERVICE PACK CONTROL ------------------------- To prevent users from installing the Service Pack, an administrator can set the Install Service Pack policy restriction, or can use the SP.TXT file. If the administrator places a file named SP.TXT (with a 'N' in the first position of the first line) in the service pack installation image directory, the service pack will not be installed. 5.0 DATA TRANSFER CONSIDERATIONS --------------------------------- The following sections describe additional support or known problems that you may notice while using the Data Transfer function. 5.1 TRANSFERRING DATA WHEN THE FILE OR DATA CCSID IS 65535 ----------------------------------------------------------- WHY DOES MY DATA LOOK LIKE GARBAGE WHEN I PERFORMED A DOWNLOAD? By default, the Data Transfer function will not convert data between EBCDIC and ASCII if the data is tagged with a CCSID of 65535. In older versions of the Win 95/NT Client Access product, the 65535 conversion was controlled by the CWBTFR.INI file. This process has been changed, and the conversion is now controlled by the Data Transfer user interface. Once the setting has been made in the user interface, it is then stored in the transfer request. This is only true for .TTO and .TFR files. .RTO and .DT files are still controlled by the CWBTFR.INI file. The conversion setting for .RTO and .DT files can be modified in the Data Transfer user interface, but the setting will not be saved. The setting to control the conversion is found in the File, Properties information. WARNING: This feature is designed as a workaround for people that can not change the CCSID of their files. In order for this translation to work properly, you must be confident the data in the file matches the CCSID of your user profile. The design of the AS/400 is that data with a 65535 CCSID are not to be converted. This feature will attempt to do a conversion of the data from the job CCSID to the PC CCSID. This conversion may not work if the data in the file does not match the user profile/job CCSID. The correct solution to this problem is to appropriately tag the data with the correct CCSID. One way of doing this is by using CHGPF. For more information on the 65535 CCSID, please reference the AS/400 National Language Support Manual.