Readme file for Client Access/400 SCS print driver.
 
Driver description: SCS print driver for Client Access/400
Driver name: ehnscsw.drv
Version: Version 3, Release 1, Level 10, Windows 3.1/95
 
NOTE: Level 10 is a "special build" driver designed to function
differently from the Client Access SCS driver for some devices
using continuous forms.  Please read "what has been fixed"
before installing this driver.  This driver may be overwritten
if you install a new version of Client Access for Windows 3.1/95.
 
Installation:
1) To install the new SCS print driver, the old SCS print
driver must have previously been installed via Client Access
and must not be in use by the Windows system or another
application.  If you receive an "in use" error message, close
any open applications or restart Windows.
2) Locate the old version of ehnscsw.drv (usually in
the directory windows\system) and make a backup copy of it
in another directory or on a diskette.
3) Copy the new version of ehnscsw.drv over the top of the
old version.
4) You can now begin using the new SCS print driver.
 
What has been fixed with this level of the SCS driver:
 
1) Devices using continuous forms (i.e., 5224, 4234, 5256 and
6408) are not automatically reset to the proper page size
when a SCS document finishes printing.  As a consequence, if
an operator manually advances the paper by using the form feed
button on the device, it will not advance a full page and the
top-of-form will have to be reset.
-- Note: The fix to this problem will cause an extra blank page
to be output with EVERY document printed.  If this is not
acceptable to you, do NOT install this level of the driver.
-- Note: If you are reporting a problem with this driver, be
sure to indicate that this is Client Access FTP site SCS driver,
Level 10 (special build).
 
In addition, this level of the driver includes the following
fixes that were part of level 9 of the SCS driver:
 
1) An unsupported attribute error is reported by the AS/400
print writer when printing to a 4224 printer device.
2) An unsupported attribute error is reported by the AS/400
print writer when printing to a 5256 printer device.
3)The version tab is missing on the SCS driver properties sheet.